summaryrefslogtreecommitdiff
path: root/include/configs/mpc7448hpc2.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/mpc7448hpc2.h')
-rw-r--r--include/configs/mpc7448hpc2.h214
1 files changed, 107 insertions, 107 deletions
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 308a7b94299..483bc5305cc 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -42,18 +42,18 @@
#define CONFIG_HIGH_BATS /* High BATs supported */
#define CONFIG_ALTIVEC /* undef to disable */
-#define CFG_BOARD_NAME "MPC7448 HPC II"
+#define CONFIG_SYS_BOARD_NAME "MPC7448 HPC II"
#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II"
-#define CFG_OCN_CLK 133000000 /* 133 MHz */
-#define CFG_CONFIG_BUS_CLK 133000000
+#define CONFIG_SYS_OCN_CLK 133000000 /* 133 MHz */
+#define CONFIG_SYS_CONFIG_BUS_CLK 133000000
-#define CFG_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */
+#define CONFIG_SYS_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */
#undef CONFIG_ECC /* disable ECC support */
/* Board-specific Initialization Functions to be called */
-#define CFG_BOARD_ASM_INIT
+#define CONFIG_SYS_BOARD_ASM_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_MISC_INIT_R
@@ -70,10 +70,10 @@
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */
-/*#define CFG_HUSH_PARSER */
-#undef CFG_HUSH_PARSER
+/*#define CONFIG_SYS_HUSH_PARSER */
+#undef CONFIG_SYS_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
/* Pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
@@ -90,19 +90,19 @@
*
* what to do:
* If you have hacked a serial cable onto the second DUART channel,
- * change the CFG_DUART port from 1 to 0 below.
+ * change the CONFIG_SYS_DUART port from 1 to 0 below.
*
*/
#define CONFIG_CONS_INDEX 1
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
-#define CFG_NS16550_CLK CFG_OCN_CLK * 8
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_OCN_CLK * 8
-#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808)
-#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08)
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08)
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
#define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -137,7 +137,7 @@
/*-------------------------------------------------------------------------- */
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -172,37 +172,37 @@
/*set date in u-boot*/
#define CONFIG_RTC_M48T35A
-#define CFG_NVRAM_BASE_ADDR 0xfc000000
-#define CFG_NVRAM_SIZE 0x8000
+#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfc000000
+#define CONFIG_SYS_NVRAM_SIZE 0x8000
/*
* Miscellaneous configurable options
*/
#define CONFIG_VERSION_VARIABLE 1
#define CONFIG_TSI108_I2C
-#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */
-#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
-#define CFG_LOAD_ADDR 0x00400000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */
-#define CFG_HZ 1000 /* decr freq: 1ms ticks */
+#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
/*
* Low Level Configuration Settings
@@ -215,46 +215,46 @@
*/
/*
- * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
* To an unused memory region. The stack will remain in cache until RAM
* is initialized
*/
-#undef CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */
-#define CFG_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */
+#undef CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0x07d00000 /* unused memory region */
+#define CONFIG_SYS_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */
-#define CFG_GBL_DATA_SIZE 128/* size in bytes reserved for init data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE 128/* size in bytes reserved for init data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */
-#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */
+#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */
-#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */
-#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */
+#define CONFIG_SYS_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */
+#define CONFIG_SYS_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */
-#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
+#define CONFIG_SYS_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
-#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
+#define CONFIG_SYS_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
-#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */
+#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */
-#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */
-#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */
+#define CONFIG_SYS_FLASH_BASE 0xff000000 /* Base Address of Flash device */
+#define CONFIG_SYS_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */
#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */
#define PCI0_IO_BASE_BOOTM 0xfd000000
-#define CFG_RESET_ADDRESS 0x3fffff00
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */
-#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+#define CONFIG_SYS_RESET_ADDRESS 0x3fffff00
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* u-boot code base */
+#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
/* Peripheral Device section */
@@ -262,8 +262,8 @@
* Resources on the Tsi108
*/
-#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */
-#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */
+#define CONFIG_SYS_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */
+#define CONFIG_SYS_TSI108_CSR_BASE CONFIG_SYS_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */
#define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */
@@ -287,74 +287,74 @@
/* PCI MEMORY MAP section */
/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS 0x00000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x80000000
+#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000
+#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000
/* PCI Memory Space */
-#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS)
-#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) /* 0xE0000000 */
-#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */
+#define CONFIG_SYS_PCI_MEM_BUS (CONFIG_SYS_PCI_MEM_PHYS)
+#define CONFIG_SYS_PCI_MEM_PHYS (CONFIG_SYS_PCI_MEM32_BASE) /* 0xE0000000 */
+#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */
/* PCI I/O Space */
-#define CFG_PCI_IO_BUS 0x00000000
-#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */
+#define CONFIG_SYS_PCI_IO_BUS 0x00000000
+#define CONFIG_SYS_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */
-#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */
+#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16MB */
#define _IO_BASE 0x00000000 /* points to PCI I/O space */
/* PCI Config Space mapping */
-#define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */
-#define CFG_PCI_CFG_SIZE 0x01000000 /* 16MB */
+#define CONFIG_SYS_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */
+#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 /* 16MB */
-#define CFG_IBAT0U 0xFE0003FF
-#define CFG_IBAT0L 0xFE000002
+#define CONFIG_SYS_IBAT0U 0xFE0003FF
+#define CONFIG_SYS_IBAT0L 0xFE000002
-#define CFG_IBAT1U 0x00007FFF
-#define CFG_IBAT1L 0x00000012
+#define CONFIG_SYS_IBAT1U 0x00007FFF
+#define CONFIG_SYS_IBAT1L 0x00000012
-#define CFG_IBAT2U 0x80007FFF
-#define CFG_IBAT2L 0x80000022
+#define CONFIG_SYS_IBAT2U 0x80007FFF
+#define CONFIG_SYS_IBAT2L 0x80000022
-#define CFG_IBAT3U 0x00000000
-#define CFG_IBAT3L 0x00000000
+#define CONFIG_SYS_IBAT3U 0x00000000
+#define CONFIG_SYS_IBAT3L 0x00000000
-#define CFG_IBAT4U 0x00000000
-#define CFG_IBAT4L 0x00000000
+#define CONFIG_SYS_IBAT4U 0x00000000
+#define CONFIG_SYS_IBAT4L 0x00000000
-#define CFG_IBAT5U 0x00000000
-#define CFG_IBAT5L 0x00000000
+#define CONFIG_SYS_IBAT5U 0x00000000
+#define CONFIG_SYS_IBAT5L 0x00000000
-#define CFG_IBAT6U 0x00000000
-#define CFG_IBAT6L 0x00000000
+#define CONFIG_SYS_IBAT6U 0x00000000
+#define CONFIG_SYS_IBAT6L 0x00000000
-#define CFG_IBAT7U 0x00000000
-#define CFG_IBAT7L 0x00000000
+#define CONFIG_SYS_IBAT7U 0x00000000
+#define CONFIG_SYS_IBAT7L 0x00000000
-#define CFG_DBAT0U 0xE0003FFF
-#define CFG_DBAT0L 0xE000002A
+#define CONFIG_SYS_DBAT0U 0xE0003FFF
+#define CONFIG_SYS_DBAT0L 0xE000002A
-#define CFG_DBAT1U 0x00007FFF
-#define CFG_DBAT1L 0x00000012
+#define CONFIG_SYS_DBAT1U 0x00007FFF
+#define CONFIG_SYS_DBAT1L 0x00000012
-#define CFG_DBAT2U 0x00000000
-#define CFG_DBAT2L 0x00000000
+#define CONFIG_SYS_DBAT2U 0x00000000
+#define CONFIG_SYS_DBAT2L 0x00000000
-#define CFG_DBAT3U 0xC0000003
-#define CFG_DBAT3L 0xC000002A
+#define CONFIG_SYS_DBAT3U 0xC0000003
+#define CONFIG_SYS_DBAT3L 0xC000002A
-#define CFG_DBAT4U 0x00000000
-#define CFG_DBAT4L 0x00000000
+#define CONFIG_SYS_DBAT4U 0x00000000
+#define CONFIG_SYS_DBAT4L 0x00000000
-#define CFG_DBAT5U 0x00000000
-#define CFG_DBAT5L 0x00000000
+#define CONFIG_SYS_DBAT5U 0x00000000
+#define CONFIG_SYS_DBAT5L 0x00000000
-#define CFG_DBAT6U 0x00000000
-#define CFG_DBAT6L 0x00000000
+#define CONFIG_SYS_DBAT6U 0x00000000
+#define CONFIG_SYS_DBAT6L 0x00000000
-#define CFG_DBAT7U 0x00000000
-#define CFG_DBAT7L 0x00000000
+#define CONFIG_SYS_DBAT7U 0x00000000
+#define CONFIG_SYS_DBAT7L 0x00000000
/* I2C addresses for the two DIMM SPD chips */
#define DIMM0_I2C_ADDR 0x51
@@ -365,21 +365,21 @@
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */
#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ }
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, /* CONFIG_SYS_FLASH_BASE2 */ }
#define CONFIG_FLASH_CFI_DRIVER
-#define CFG_FLASH_CFI
-#define CFG_WRITE_SWAPPED_DATA
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
#define PHYS_FLASH_SIZE 0x01000000
-#define CFG_MAX_FLASH_SECT (128)
+#define CONFIG_SYS_MAX_FLASH_SECT (128)
#define CONFIG_ENV_IS_IN_NVRAM
#define CONFIG_ENV_ADDR 0xFC000000
@@ -390,16 +390,16 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
* L2CR setup -- make sure this is right for your board!
* look in include/mpc74xx.h for the defines used here
*/
-#undef CFG_L2
+#undef CONFIG_SYS_L2
#define L2_INIT 0
#define L2_ENABLE (L2_INIT | L2CR_L2E)
@@ -411,5 +411,5 @@
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_SERIAL_HANG_IN_EXCEPTION
+#define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
#endif /* __CONFIG_H */