diff options
Diffstat (limited to 'include/configs/ms7722se.h')
| -rw-r--r-- | include/configs/ms7722se.h | 82 |
1 files changed, 41 insertions, 41 deletions
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 5f5970b54d1..9997c9b0178 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -53,79 +53,79 @@ #define MS7722SE_FLASH_BASE_1 (0xA0000000) #define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024) -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ -#define CFG_PBSIZE 256 /* Buffer size for Console output */ -#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ -#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ -#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ +#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ +#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ +#define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ /* SCIF */ #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 -#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console information at boot */ -#undef CFG_CONSOLE_OVERWRITE_ROUTINE -#undef CFG_CONSOLE_ENV_OVERWRITE +#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress display of console information at boot */ +#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE -#define CFG_MEMTEST_START (MS7722SE_SDRAM_BASE) -#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) +#define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) -#undef CFG_ALT_MEMTEST /* Enable alternate, more extensive, memory test */ -#undef CFG_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */ +#undef CONFIG_SYS_ALT_MEMTEST /* Enable alternate, more extensive, memory test */ +#undef CONFIG_SYS_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */ -#undef CFG_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */ +#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */ -#define CFG_SDRAM_BASE (MS7722SE_SDRAM_BASE) -#define CFG_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */ +#define CONFIG_SYS_SDRAM_BASE (MS7722SE_SDRAM_BASE) +#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */ -#define CFG_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image +#define CONFIG_SYS_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CFG_MONITOR_LEN (128 * 1024) /* */ -#define CFG_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CFG_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */ -#define CFG_BOOTMAPSZ (8 * 1024 * 1024) +#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* */ +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ +#define CONFIG_SYS_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */ +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ -#define CFG_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER -#undef CFG_FLASH_QUIET_TEST -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#undef CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */ +#define CONFIG_SYS_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */ -#define CFG_MAX_FLASH_SECT 150 /* Max number of sectors on each +#define CONFIG_SYS_MAX_FLASH_SECT 150 /* Max number of sectors on each Flash chip */ /* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */ -#define CFG_MAX_FLASH_BANKS 2 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \ - CFG_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \ + CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \ } -#define CFG_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */ -#define CFG_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */ -#define CFG_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */ -#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */ +#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */ +#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */ -#undef CFG_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */ +#undef CONFIG_SYS_FLASH_PROTECTION /* Use hardware flash sectors protection instead of U-Boot software protection */ -#undef CFG_DIRECT_FLASH_TFTP +#undef CONFIG_SYS_DIRECT_FLASH_TFTP #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_ENV_SECT_SIZE (8 * 1024) #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CFG_FLASH_BASE) /* Offset of env Flash sector relative to CFG_FLASH_BASE */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR_REDUND (CFG_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) +#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) #endif /* __MS7722SE_H */ |