diff options
Diffstat (limited to 'include/configs/r2dplus.h')
| -rw-r--r-- | include/configs/r2dplus.h | 68 |
1 files changed, 34 insertions, 34 deletions
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 41a2a15122f..6921759d554 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -36,66 +36,66 @@ #define CONFIG_ENV_OVERWRITE 1 /* SDRAM */ -#define CFG_SDRAM_BASE (0x8C000000) -#define CFG_SDRAM_SIZE (0x04000000) - -#define CFG_LONGHELP -#define CFG_PROMPT "=> " -#define CFG_CBSIZE 256 -#define CFG_PBSIZE 256 -#define CFG_MAXARGS 16 -#define CFG_BARGSIZE 512 +#define CONFIG_SYS_SDRAM_BASE (0x8C000000) +#define CONFIG_SYS_SDRAM_SIZE (0x04000000) + +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE 512 /* List of legal baudrate settings for this board */ -#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } -#define CFG_MEMTEST_START (CFG_SDRAM_BASE) -#define CFG_MEMTEST_END (TEXT_BASE - 0x100000) +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (TEXT_BASE - 0x100000) -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024) /* Address of u-boot image in Flash */ -#define CFG_MONITOR_BASE (CFG_FLASH_BASE) -#define CFG_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CFG_MALLOC_LEN (1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_SIZE (256) -#define CFG_BOOTMAPSZ (8 * 1024 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE (256) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* * NOR Flash ( Spantion S29GL256P ) */ -#define CFG_FLASH_CFI +#define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER -#define CFG_FLASH_BASE (0xA0000000) -#define CFG_MAX_FLASH_BANKS (1) -#define CFG_MAX_FLASH_SECT 256 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CONFIG_SYS_FLASH_BASE (0xA0000000) +#define CONFIG_SYS_MAX_FLASH_BANKS (1) +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x40000 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) /* * SuperH Clock setting */ #define CONFIG_SYS_CLK_FREQ 60000000 #define TMU_CLK_DIVIDER 4 -#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) -#define CFG_PLL_SETTLING_TIME 100/* in us */ +#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /* * IDE support */ #define CONFIG_IDE_RESET 1 -#define CFG_PIO_MODE 1 -#define CFG_IDE_MAXBUS 1 /* IDE bus */ -#define CFG_IDE_MAXDEVICE 1 -#define CFG_ATA_BASE_ADDR 0xb4000000 -#define CFG_ATA_STRIDE 2 /* 1bit shift */ -#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ -#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ -#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ +#define CONFIG_SYS_PIO_MODE 1 +#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 +#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 +#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ +#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ /* * SuperH PCI Bridge Configration |