diff options
Diffstat (limited to 'include/configs')
46 files changed, 91 insertions, 447 deletions
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h index 2ee8c61cea4..f677b9c80a1 100644 --- a/include/configs/ADS860.h +++ b/include/configs/ADS860.h @@ -51,7 +51,7 @@ /* This is picked up again in fads.h */ #define FADS_COMMANDS_ALREADY_DEFINED -#include "fads.h" +#include "../../board/fads/fads.h" #define CFG_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */ diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 02f0c76e074..2f266a242ff 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -193,7 +193,8 @@ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #undef CONFIG_AUTOBOOT_DELAY_STR #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 7389c38b9e1..cefdd29602d 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -131,7 +131,7 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 KB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */ #ifdef CONFIG_BZIP2 #define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ #else diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h index a992498dc08..84efd2fe086 100644 --- a/include/configs/AmigaOneG3SE.h +++ b/include/configs/AmigaOneG3SE.h @@ -371,7 +371,8 @@ #define CONFIG_BOOTDELAY 5 /* Boot automatically after five seconds */ #define CONFIG_PREBOOT "" #define CONFIG_BOOTCOMMAND "fdcboot; diskboot" -#define CONFIG_MENUPROMPT "Press any key to interrupt autoboot: %2d " +#define CONFIG_MENUPROMPT \ + "Press any key to interrupt autoboot: %2d ", bootdelay #define CONFIG_MENUKEY ' ' #define CONFIG_MENUCOMMAND "menu" /* #define CONFIG_AUTOBOOT_KEYED */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 6b585bed5f7..c1735392022 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -152,8 +152,9 @@ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /* Only interrupt boot if special string is typed */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Autobooting in %d seconds\n", bootdelay #undef CONFIG_AUTOBOOT_DELAY_STR #undef CONFIG_AUTOBOOT_STOP_STR /* defined via environment var */ #define CONFIG_AUTOBOOT_STOP_STR2 "esdesd" /* esd special for esd access*/ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 0f5f85c22a6..64c9ac076da 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -345,8 +345,9 @@ int du440_phy_addr(int devnum); #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h index 18de6b00e7a..38295c4550b 100644 --- a/include/configs/FADS860T.h +++ b/include/configs/FADS860T.h @@ -38,7 +38,7 @@ #define CONFIG_DRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1 -#include "fads.h" +#include "../../board/fads/fads.h" #ifdef USE_REAL_FLASH_VALUES /* diff --git a/include/configs/GTH.h b/include/configs/GTH.h index 00e09f703cd..461670a1042 100644 --- a/include/configs/GTH.h +++ b/include/configs/GTH.h @@ -62,8 +62,9 @@ /* Only interrupt boot if space is pressed */ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press space to abort autoboot in %d second\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index f6c31ea8497..e52fbfde0e7 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -488,7 +488,8 @@ #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #if 0 -#define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Boote in %d Sekunden - stop mit \"2\"\n", bootdelay #endif #define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */ #define CONFIG_SILENT_CONSOLE 1 diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index e558aa481b3..be0c7af8f3e 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -454,7 +454,8 @@ #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #if 0 -#define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Boote in %d Sekunden - stop mit \"2\"\n", bootdelay #endif #define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */ #define CONFIG_SILENT_CONSOLE 1 diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h index e0e85548115..233a8d19fa9 100644 --- a/include/configs/MPC86xADS.h +++ b/include/configs/MPC86xADS.h @@ -41,7 +41,7 @@ #define CONFIG_DRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1 -#include "fads.h" +#include "../../board/fads/fads.h" #define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V) diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h index 1867c5bf0a2..f4d18427710 100644 --- a/include/configs/MPC885ADS.h +++ b/include/configs/MPC885ADS.h @@ -27,7 +27,7 @@ #define CONFIG_SDRAM_50MHZ 1 -#include "fads.h" +#include "../../board/fads/fads.h" #define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V) diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 04580b7a264..8c8a445c8b3 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -40,7 +40,7 @@ #define CONFIG_MISC_INIT_R 1 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#ifdef (CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 #endif @@ -255,7 +255,7 @@ #define CONFIG_NET_RETRY_COUNT 5 #define CONFIG_E1000 -#define CONFIG_E1000_FALLBACK_MAC 0xb6b445ebfbc0 +#define CONFIG_E1000_FALLBACK_MAC { 0xb6, 0xb4, 0x45, 0xeb, 0xfb, 0xc0 } #undef CONFIG_MPC5xxx_FEC #undef CONFIG_PHY_ADDR #define CONFIG_NETDEV eth0 @@ -268,7 +268,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #undef CFG_LONGHELP #define CFG_PROMPT "=> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#ifdef (CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 #else #define CFG_CBSIZE 256 diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index d08d79520c9..8e247af63cd 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -59,17 +59,18 @@ #define CONFIG_CLOCKS_IN_MHZ 1 -#define CONFIG_BOARD_TYPES 1 +#define CONFIG_BOARD_TYPES 1 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "autoboot in %d seconds (stop with 's')...\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR "s" #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 60 diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 0b094827d76..84c6e9b6179 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -65,9 +65,10 @@ #define CFG_MEASURE_CPUCLK #define CFG_8XX_XIN CONFIG_8xx_OSCLK -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d seconds...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d seconds...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "ids" #define CONFIG_BOOT_RETRY_TIME 900 #define CONFIG_BOOT_RETRY_MIN 30 diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 0bd77c07b65..a3d1c56dc25 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -154,8 +154,9 @@ /* Only interrupt boot if space is pressed */ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #undef CONFIG_AUTOBOOT_DELAY_STR #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index e8b405a8849..42f1d8d0062 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -409,7 +409,8 @@ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #undef CONFIG_AUTOBOOT_DELAY_STR #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index 872765c92f4..faae407da5d 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -68,7 +68,8 @@ #ifdef DEPLOYMENT #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "autoboot in %d seconds (stop with 'st')...\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR "st" #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 1 diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 3aee45c3c7c..aefc7eecbd1 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -465,7 +465,7 @@ #if 1 #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "delayabit" #define CONFIG_AUTOBOOT_STOP_STR " " /* easy to stop for now */ #endif diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h deleted file mode 100644 index 427b5482f5c..00000000000 --- a/include/configs/adsvix.h +++ /dev/null @@ -1,365 +0,0 @@ -/* - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Configuation settings for the LUBBOCK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ -#define CONFIG_ADSVIX 1 /* on a Adsvix Board */ -#define CONFIG_MMC 1 -#define BOARD_LATE_INIT 1 - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define RTC - -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_FFUART 1 /* we use FFUART on ADSVIX */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_DOS_PARTITION 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IDE -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PCMCIA - -#undef CONFIG_CMD_NET - - -#undef CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_SERVERIP 192.168.1.99 -#define CONFIG_BOOTCOMMAND "run boot_flash" -#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ - " rw root=/dev/ram initrd=0xa0800000,5m" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "program_boot_cf=" \ - "mw.b 0xa0010000 0xff 0x20000; " \ - "if pinit on && " \ - "ide reset && " \ - "fatload ide 0 0xa0010000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x1ffff; " \ - "erase 0x0 0x1ffff; " \ - "cp.b 0xa0010000 0x0 0x20000; " \ - "fi\0" \ - "program_uzImage_cf=" \ - "mw.b 0xa0010000 0xff 0x180000; " \ - "if pinit on && " \ - "ide reset && " \ - "fatload ide 0 0xa0010000 uzImage; " \ - "then " \ - "protect off 0x40000 0x1bffff; " \ - "erase 0x40000 0x1bffff; " \ - "cp.b 0xa0010000 0x40000 0x180000; " \ - "fi\0" \ - "program_ramdisk_cf=" \ - "mw.b 0xa0010000 0xff 0x500000; " \ - "if pinit on && " \ - "ide reset && " \ - "fatload ide 0 0xa0010000 ramdisk.gz; " \ - "then " \ - "protect off 0x1c0000 0x6bffff; " \ - "erase 0x1c0000 0x6bffff; " \ - "cp.b 0xa0010000 0x1c0000 0x500000; " \ - "fi\0" \ - "boot_cf=" \ - "if pinit on && " \ - "ide reset && " \ - "fatload ide 0 0xa0030000 uzImage && " \ - "fatload ide 0 0xa0800000 ramdisk.gz; " \ - "then " \ - "bootm 0xa0030000; " \ - "fi\0" \ - "program_boot_mmc=" \ - "mw.b 0xa0010000 0xff 0x20000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x1ffff; " \ - "erase 0x0 0x1ffff; " \ - "cp.b 0xa0010000 0x0 0x20000; " \ - "fi\0" \ - "program_uzImage_mmc=" \ - "mw.b 0xa0010000 0xff 0x180000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 uzImage; " \ - "then " \ - "protect off 0x40000 0x1bffff; " \ - "erase 0x40000 0x1bffff; " \ - "cp.b 0xa0010000 0x40000 0x180000; " \ - "fi\0" \ - "program_ramdisk_mmc=" \ - "mw.b 0xa0010000 0xff 0x500000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 ramdisk.gz; " \ - "then " \ - "protect off 0x1c0000 0x6bffff; " \ - "erase 0x1c0000 0x6bffff; " \ - "cp.b 0xa0010000 0x1c0000 0x500000; " \ - "fi\0" \ - "boot_mmc=" \ - "if mmcinit && " \ - "fatload mmc 0 0xa0030000 uzImage && " \ - "fatload mmc 0 0xa0800000 ramdisk.gz; " \ - "then " \ - "bootm 0xa0030000; " \ - "fi\0" \ - "boot_flash=" \ - "cp.b 0x1c0000 0xa0800000 0x500000; " \ - "bootm 0x40000\0" \ - -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -/* #define CONFIG_INITRD_TAG 1 */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_HUSH_PARSER 1 -#define CFG_PROMPT_HUSH_PS2 "> " - -#define CFG_LONGHELP /* undef to save memory */ -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT "$ " /* Monitor Command Prompt */ -#else -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#endif -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_DEVICE_NULLDEV 1 - -#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ - -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ - - /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CFG_MMC_BASE 0xF0000000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CFG_DRAM_BASE 0xa0000000 -#define CFG_DRAM_SIZE 0x04000000 - -#define CFG_FLASH_BASE PHYS_FLASH_1 - -/* - * GPIO settings - */ - -#define CFG_GPSR0_VAL 0x00018004 -#define CFG_GPSR1_VAL 0x004F0080 -#define CFG_GPSR2_VAL 0x13EFC000 -#define CFG_GPSR3_VAL 0x0006E032 -#define CFG_GPCR0_VAL 0x084AFE1A -#define CFG_GPCR1_VAL 0x003003F2 -#define CFG_GPCR2_VAL 0x0C014000 -#define CFG_GPCR3_VAL 0x00000C00 -#define CFG_GPDR0_VAL 0xCBC3BFFC -#define CFG_GPDR1_VAL 0x00FFABF3 -#define CFG_GPDR2_VAL 0x1EEFFC00 -#define CFG_GPDR3_VAL 0x0187EC32 -#define CFG_GAFR0_L_VAL 0x84400000 -#define CFG_GAFR0_U_VAL 0xA51A8010 -#define CFG_GAFR1_L_VAL 0x699A955A -#define CFG_GAFR1_U_VAL 0x0005A0AA -#define CFG_GAFR2_L_VAL 0x40000000 -#define CFG_GAFR2_U_VAL 0x0109A400 -#define CFG_GAFR3_L_VAL 0x54000000 -#define CFG_GAFR3_U_VAL 0x00001409 - -#define CFG_PSSR_VAL 0x20 - -/* - * Clock settings - */ -#define CFG_CKEN 0x00400200 -#define CFG_CCCR 0x02000290 /* 520Mhz */ -/* #define CFG_CCCR 0x02000210 416 Mhz */ - -/* - * Memory settings - */ - -#define CFG_MSC0_VAL 0x23F2B3DB -#define CFG_MSC1_VAL 0x0000CCD1 -#define CFG_MSC2_VAL 0x0000B884 -#define CFG_MDCNFG_VAL 0x08000AC8 -#define CFG_MDREFR_VAL 0x0000001E -#define CFG_MDMRS_VAL 0x00000000 - -#define CFG_FLYCNFG_VAL 0x00010001 -#define CFG_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CFG_MECR_VAL 0x00000002 -#define CFG_MCMEM0_VAL 0x00004204 -#define CFG_MCMEM1_VAL 0x00000000 -#define CFG_MCATT0_VAL 0x00010504 -#define CFG_MCATT1_VAL 0x00000000 -#define CFG_MCIO0_VAL 0x00008407 -#define CFG_MCIO1_VAL 0x00000000 - -#define CONFIG_PXA_PCMCIA 1 -#define CONFIG_PXA_IDE 1 - -#define CONFIG_PCMCIA_SLOT_A 1 -/* just to keep build system happy */ - -#define CFG_PCMCIA_MEM_ADDR 0x28000000 -#define CFG_PCMCIA_MEM_SIZE 0x04000000 - - -#define CFG_IDE_MAXBUS 1 -/* max. 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 1 -/* max. 1 drive per IDE bus */ - -#define CFG_ATA_IDE0_OFFSET 0x0000 - -#define CFG_ATA_BASE_ADDR 0x20000000 - -/* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET 0x1f0 - -/* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET 0x1f0 - -/* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET 0x3f0 - -/* - * FLASH and environment organization - */ - -#define CFG_FLASH_CFI -#define CFG_FLASH_CFI_DRIVER 1 - -#define CFG_MONITOR_BASE 0 -#define CFG_MONITOR_LEN 0x20000 - -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ - -/* write flash less slowly */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 - -/* Flash environment locations */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ -#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */ -#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 89732968ade..5884611b9ad 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -103,14 +103,6 @@ */ #define CONFIG_SERIAL1 1 /* UART1 on H4 */ - /* - * I2C configuration - */ -#define CONFIG_HARD_I2C -#define CFG_I2C_SPEED 100000 -#define CFG_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP24XX_I2C - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 951ce160a45..cd2eae20634 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -112,16 +112,11 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_MII #define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_LOADS - +#define CFG_NAND_LEGACY #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -137,6 +132,7 @@ #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ #define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ +#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ #define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) #define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 84d235ea9d5..f040b863c77 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -82,8 +82,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 90910bb98a5..68f0cecf39e 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -110,8 +110,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index 03472a8869c..d3a2f69edea 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -110,8 +110,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 07add821a94..a37ba92416b 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -110,8 +110,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index f9af67540a0..a6c5b6e24ed 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -110,8 +110,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/csb637.h b/include/configs/csb637.h index e9c6d8e7aec..735a211e07e 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -114,17 +114,11 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_DHCP +#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_PING -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_LOADS - +#ifdef NAND_SUPPORT_HAS_BEEN_FIXED /* NAND support is broken / unimplemented */ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -140,6 +134,7 @@ #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ #define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ +#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ #define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) #define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) @@ -155,6 +150,8 @@ #define NAND_CTL_CLRCLE(nandptr) #define NAND_CTL_SETCLE(nandptr) +#endif /* NAND_SUPPORT_HAS_BEEN_FIXED */ + #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */ diff --git a/include/configs/gth2.h b/include/configs/gth2.h index c2d6ca70a54..7f7190bcdb4 100644 --- a/include/configs/gth2.h +++ b/include/configs/gth2.h @@ -54,8 +54,9 @@ /* Only interrupt boot if space is pressed */ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press space to abort autoboot in %d second\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 7c2c224060d..d9187825e54 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -279,7 +279,8 @@ * To stop use: " " */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Autobooting in %d seconds, press \" \" to stop\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR " " #undef CONFIG_AUTOBOOT_DELAY_STR #define DEBUG_BOOTKEYS 0 diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 01e79701623..264192f2620 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -224,7 +224,7 @@ */ #define CONFIG_AUTOBOOT_KEYED #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ - "press <SPACE> to stop\n" + "press <SPACE> to stop\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR " " #undef CONFIG_AUTOBOOT_DELAY_STR #define DEBUG_BOOTKEYS 0 diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index d3908b9eaf4..bc642941162 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -82,7 +82,8 @@ #undef CONFIG_BOOT_RETRY_TIME #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Boot in %02d seconds ('s' to stop)..." +#define CONFIG_AUTOBOOT_PROMPT \ + "Boot in %02d seconds ('s' to stop)...", bootdelay #define CONFIG_AUTOBOOT_STOP_STR "s" #define CONFIG_CMD_IDE diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 8a8270260a3..87abfba14c2 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -252,7 +252,8 @@ #define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ #if 0 #define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ #endif /*----------------------------------------------------------------------*/ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index cf406c8c0da..2f3a0660628 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -277,7 +277,8 @@ #define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ #if 0 #define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ #endif diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h index 095fdaf5c8b..e4be1ed33fe 100644 --- a/include/configs/m501sk.h +++ b/include/configs/m501sk.h @@ -40,7 +40,6 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -#undef CONFIG_AUTOBOOT_PROMPT #define CONFIG_MENUPROMPT "." /* @@ -105,7 +104,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "unlock=yes\0" -#define CFG_CMD_JFFS2 +#define CONFIG_CMD_JFFS2 #undef CONFIG_CMD_EEPROM #define CONFIG_CMD_NET #define CONFIG_CMD_RUN diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index b6843af3dc6..3d1eafee696 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -96,7 +96,7 @@ #undef CONFIG_AUTOBOOT_DELAY_STR #undef CONFIG_BOOTARGS #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ - "press \"<Esc><Esc>\" to stop\n" + "press \"<Esc><Esc>\" to stop\n", bootdelay #define CONFIG_ETHADDR 00:50:C2:40:10:00 #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 2eb4af1554d..87264fbb4b5 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -230,7 +230,8 @@ #undef CONFIG_SILENT_CONSOLE /* enable silent startup */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR " " #define CONFIG_AUTOBOOT_DELAY_STR "d" diff --git a/include/configs/netstar.h b/include/configs/netstar.h index d4deda407fb..756b7c26717 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -195,7 +195,8 @@ #if 0 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d secs...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nNetStar PBX - boot in %d secs...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ #endif diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 56b4d92f1a7..dee664361f9 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -228,7 +228,8 @@ * To stop use: " " */ # define CONFIG_AUTOBOOT_KEYED -# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n" +# define CONFIG_AUTOBOOT_PROMPT \ + "Autobooting in %d seconds, press \" \" to stop\n", bootdelay # define CONFIG_AUTOBOOT_STOP_STR " " # undef CONFIG_AUTOBOOT_DELAY_STR # define DEBUG_BOOTKEYS 0 diff --git a/include/configs/quantum.h b/include/configs/quantum.h index f49e2b0716e..cc261c33e10 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -116,7 +116,8 @@ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "system" /* * Miscellaneous configurable options diff --git a/include/configs/rmu.h b/include/configs/rmu.h index 28fb7c3318c..596bf155660 100644 --- a/include/configs/rmu.h +++ b/include/configs/rmu.h @@ -111,7 +111,8 @@ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "system" /* diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 2a398e8c45c..8427752d78e 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -436,7 +436,7 @@ * To stop use: " " */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Autobooting...\n" +#define CONFIG_AUTOBOOT_PROMPT "Autobooting...\n" #define CONFIG_AUTOBOOT_STOP_STR " " #undef CONFIG_AUTOBOOT_DELAY_STR #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 79931372113..b92344ccc18 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -306,7 +306,8 @@ */ #undef CONFIG_AUTOBOOT_KEYED #ifdef CONFIG_AUTOBOOT_KEYED -# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n" +# define CONFIG_AUTOBOOT_PROMPT \ + "Autobooting in %d seconds, press \" \" to stop\n", bootdelay # define CONFIG_AUTOBOOT_STOP_STR " " # undef CONFIG_AUTOBOOT_DELAY_STR # define DEBUG_BOOTKEYS 0 diff --git a/include/configs/sc3.h b/include/configs/sc3.h index f6e40def518..87311ea6c7a 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -132,7 +132,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nSC3 - booting... stop with ENTER\n" #define CONFIG_AUTOBOOT_DELAY_STR "\r" /* 1st "password" */ #define CONFIG_AUTOBOOT_DELAY_STR2 "\n" /* 1st "password" */ #endif diff --git a/include/configs/trab.h b/include/configs/trab.h index de36fca11e7..b0615a0e377 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -289,7 +289,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ #endif diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 287a6187a2d..1675ab752cb 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -58,7 +58,7 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTDELAY 2 -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay #define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */ #define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */ |