diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/ADNPESC1.h | 689 | ||||
| -rw-r--r-- | include/configs/ADNPESC1_base_32.h | 431 | ||||
| -rw-r--r-- | include/configs/DK1C20.h | 555 | ||||
| -rw-r--r-- | include/configs/DK1C20_safe_32.h | 34 | ||||
| -rw-r--r-- | include/configs/DK1C20_standard_32.h | 279 | ||||
| -rw-r--r-- | include/configs/DK1S10.h | 561 | ||||
| -rw-r--r-- | include/configs/DK1S10_mtx_ldk_20.h | 187 | ||||
| -rw-r--r-- | include/configs/DK1S10_safe_32.h | 34 | ||||
| -rw-r--r-- | include/configs/DK1S10_standard_32.h | 274 |
9 files changed, 0 insertions, 3044 deletions
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h deleted file mode 100644 index 2d4fc779150..00000000000 --- a/include/configs/ADNPESC1.h +++ /dev/null @@ -1,689 +0,0 @@ -/* - * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*********************************************************************** - * Include the whole NIOS CPU configuration. - * - * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!! - * - ***********************************************************************/ - -#if defined(CONFIG_NIOS_BASE_32) -#include <configs/ADNPESC1_base_32.h> -#else -#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration -#endif - -/*------------------------------------------------------------------------ - * BOARD/CPU -- TOP-LEVEL - *----------------------------------------------------------------------*/ -#define CONFIG_NIOS 1 /* NIOS-32 core */ -#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */ -#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */ -#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ - -/*------------------------------------------------------------------------ - * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM) - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0) - -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE - -#else -#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config -#endif - -#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE) - -#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE -#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE - -#else - -#undef CONFIG_SYS_SRAM_BASE -#undef CONFIG_SYS_SRAM_SIZE - -#endif - -#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE - -/*------------------------------------------------------------------------ - * MEMORY ORGANIZATION - For the most part, you can put things pretty - * much anywhere. This is pretty flexible for Nios. So here we make some - * arbitrary choices & assume that the monitor is placed at the end of - * a memory resource (so you must make sure TEXT_BASE is chosen - * appropriately -- this is very important if you plan to move your - * memory to another place as configured at this time !!!). - * - * -The heap is placed below the monitor. - * -Global data is placed below the heap. - * -The stack is placed below global data (&grows down). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET - -/*------------------------------------------------------------------------ - * FLASH (AM29LV065D) - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) - -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size */ - -#else -#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * ENVIRONMENT - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) - -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ - -/* Mem addr of environment */ -#if defined(CONFIG_NIOS_BASE_32) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -#else -#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR -#endif - -#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ -#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */ - -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */ -#endif - -/*------------------------------------------------------------------------ - * NIOS APPLICATION CODE BASE AREA - *----------------------------------------------------------------------*/ -#if ((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000) -#define CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100" -#define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "0x1050000" -#define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "0x105000c" -#define CONFIG_SYS_ADNPESC1_NIOS_APPL_END "0x11fffff" -#define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "0x1200000" -#define CONFIG_SYS_ADNPESC1_FILESYSTEM_END "0x17fffff" -#else -#error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h -#endif -#define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "Nios" - -/*------------------------------------------------------------------------ - * BOOT ENVIRONMENT - *----------------------------------------------------------------------*/ -#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ -#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF "sled boot off; " -#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK "sled red blink; " -#else -#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF -#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK -#endif - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTCOMMAND \ - "if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \ - "then " \ - "wd off; " \ - CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF \ - "go $appl_entry_addr; " \ - "else " \ - CONFIG_SYS_ADNPESC1_SLED_RED_BLINK \ - "echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\ - "echo *** invalid application at $appl_entry_addr; " \ - "echo *** stop bootup...; " \ - "fi" - -/*------------------------------------------------------------------------ - * EXTRA ENVIRONMENT - *----------------------------------------------------------------------*/ -#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ -#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON "sled yellow on; " -#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF "sled yellow off; " -#else -#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON -#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "update_allowed=0\0" \ - "update_load_addr=" CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "\0" \ - "appl_entry_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "\0" \ - "appl_end_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_END "\0" \ - "appl_ident_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "\0" \ - "appl_ident_str=" CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "\0" \ - "appl_name=ADNPESC1/base32/linux.bin\0" \ - "appl_update=" \ - "if itest.b $update_allowed != 0; " \ - "then " \ - CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \ - "tftp $update_load_addr $appl_name; " \ - "protect off $appl_entry_addr $appl_end_addr; " \ - "era $appl_entry_addr $appl_end_addr; " \ - "cp.b $update_load_addr $appl_entry_addr $filesize; "\ - CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \ - "else " \ - "echo *** update not allowed (update_allowed=$update_allowed); "\ - "fi\0" \ - "fs_base_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "\0" \ - "fs_end_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_END "\0" \ - "fs_name=ADNPESC1/base32/romfs.img\0" \ - "fs_update=" \ - "if itest.b $update_allowed != 0; " \ - "then " \ - CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \ - "tftp $update_load_addr $fs_name; " \ - "protect off $fs_base_addr $fs_end_addr; " \ - "era $fs_base_addr $fs_end_addr; " \ - "cp.b $update_load_addr $fs_base_addr $filesize; "\ - CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \ - "else " \ - "echo *** update not allowed (update_allowed=$update_allowed); "\ - "fi\0" \ - "uboot_name=ADNPESC1/base32/u-boot.bin\0" \ - "uboot_loadnrun=" \ - "if ping $serverip; " \ - "then " \ - CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \ - "tftp $update_load_addr $uboot_name; " \ - "wd off; " \ - "go $update_load_addr; " \ - "else " \ - "echo *** missing connection to $serverip; " \ - "echo *** check your network and try again...; "\ - "fi\0" - -/*------------------------------------------------------------------------ - * CONSOLE - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0) - -#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */ - -#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0) -#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ -#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR -#else -#undef CONFIG_SYS_NIOS_FIXEDBAUD -#define CONFIG_BAUDRATE 115200 -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT, - * so an avalon bus timer is required. - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER) - -#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0) - -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */ -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ - -#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ - -#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ) -#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ -#endif - -#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ - -#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */ - -#if (CONFIG_SYS_HZ <= 1000) -#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 -#endif - -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - -#else -#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct -#endif - -#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1) - -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */ -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ - -#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ - -#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ) -#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ -#endif - -#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ - -#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */ - -#if (CONFIG_SYS_HZ <= 1000) -#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 -#endif - -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - -#else -#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct -#endif - -#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */ - -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * WATCHDOG (or better MAX823 supervisory circuite access) - *----------------------------------------------------------------------*/ -#define CONFIG_HW_WATCHDOG 1 /* board specific WD */ - -#ifdef CONFIG_HW_WATCHDOG - -/* MAX823 supervisor -- watchdog enable port at: */ -#if (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */ -#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9) -#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */ -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config -#endif - -/* MAX823 supervisor -- watchdog trigger port at: */ -#if (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */ -#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9) -#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */ -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config -#endif - -#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */ -#define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */ -#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */ -#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/ -#else -#error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h -#endif - -#endif /* CONFIG_HW_WATCHDOG */ - -/*------------------------------------------------------------------------ - * SERIAL PERIPHAREL INTERFACE - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1) - -#define CONFIG_NIOS_SPI 1 /* SPI support active */ -#define CONFIG_SYS_NIOS_SPIBASE CONFIG_SYS_NIOS_CPU_SPI0 -#define CONFIG_SYS_NIOS_SPIBITS CONFIG_SYS_NIOS_CPU_SPI0_BITS - -#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */ -#define CONFIG_SYS_SPI_RTC_DEVID 0 /* as 1st SPI device */ - -#else -#undef CONFIG_NIOS_SPI /* NO SPI support */ -#endif - -/*------------------------------------------------------------------------ - * Ethernet -- needs work! - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ - -#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) -#define CONFIG_SMC_USE_32_BIT 1 -#else /* no */ -#undef CONFIG_SMC_USE_32_BIT -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ - - /********************************************/ - /* !!! CS8900 is __not__ tested on NIOS !!! */ - /********************************************/ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* Using CS8900 */ -#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \ - CONFIG_SYS_NIOS_CPU_LAN0_OFFS) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) -#undef CONFIG_CS8900_BUS16 -#define CONFIG_CS8900_BUS32 -#else /* no */ -#define CONFIG_CS8900_BUS16 -#undef CONFIG_CS8900_BUS32 -#endif - -#else -#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config -#endif - -#define CONFIG_ETHADDR 02:80:ae:20:60:6f -#define CONFIG_NETMASK 255.255.255.248 -#define CONFIG_IPADDR 192.168.161.84 -#define CONFIG_SERVERIP 192.168.161.85 - -#else -#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h -#endif - -/*------------------------------------------------------------------------ - * STATUS LEDs - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO) - -#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0) - -#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO0 -#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO0_BITS -#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1) -#define STATUS_LED_WRONLY 1 -#else -#undef STATUS_LED_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1) - -#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO1 -#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO1_BITS -#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1) -#define STATUS_LED_WRONLY 1 -#else -#undef STATUS_LED_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2) - -#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2 -#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS -#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1) -#define STATUS_LED_WRONLY 1 -#else -#undef STATUS_LED_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h - -#else -#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case -#endif - -#define CONFIG_STATUS_LED 1 /* enable status led driver */ - -#define STATUS_LED_BIT (1 << 0) /* LED[0] */ -#define STATUS_LED_STATE STATUS_LED_BLINKING -#define STATUS_LED_BOOT_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */ -#define STATUS_LED_BOOT 0 /* boot LED */ - -#if (STATUS_LED_BITS > 1) -#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */ -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10) /* ca. 5 Hz */ -#define STATUS_LED_RED 1 /* fail LED */ -#endif - -#if (STATUS_LED_BITS > 2) -#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */ -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */ -#define STATUS_LED_YELLOW 2 /* info LED */ -#endif - -#if (STATUS_LED_BITS > 3) -#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */ -#define STATUS_LED_STATE3 STATUS_LED_OFF -#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */ -#define STATUS_LED_GREEN 3 /* info LED */ -#endif - -#define STATUS_LED_PAR 1 /* makes status_led.h happy */ - -#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ - -/*------------------------------------------------------------------------ - * Diagnostics / Power On Self Tests - *----------------------------------------------------------------------*/ -#define CONFIG_POST CONFIG_SYS_POST_RTC -#define CONFIG_SYS_NIOS_POST_WORD_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BSP -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_DISPLAY -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_REISER -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG - -#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1) -#define CONFIG_CMD_DATE -#define CONFIG_CMD_SPI -#endif - -/*------------------------------------------------------------------------ - * KGDB - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 9600 -#endif - -/*------------------------------------------------------------------------ - * MISC - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser - undef to save memory */ -#define CONFIG_SYS_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max number of command args*/ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "[]> " -#endif - -/* Default load address */ -#if (CONFIG_SYS_SRAM_SIZE != 0) - -/* default in SRAM */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE - -#elif (CONFIG_SYS_SDRAM_SIZE != 0) - -/* default in SDRAM */ -#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) -#if 1 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) -#else -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000) -#endif -#else -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE -#endif - -#else -#undef CONFIG_SYS_LOAD_ADDR /* force error break */ -#endif - -/* MEM test area */ -#if (CONFIG_SYS_SDRAM_SIZE != 0) - -/* SDRAM begin to stack area (1MB stack) */ -#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) -#if 0 -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) -#else -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400000) -#endif -#else -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#endif - -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) - -#else -#undef CONFIG_SYS_MEMTEST_START /* force error break */ -#undef CONFIG_SYS_MEMTEST_END -#endif - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/ADNPESC1_base_32.h b/include/configs/ADNPESC1_base_32.h deleted file mode 100644 index 1fe8d095be4..00000000000 --- a/include/configs/ADNPESC1_base_32.h +++ /dev/null @@ -1,431 +0,0 @@ -/* - * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_ADNPESC1_BASE_32_H -#define __CONFIG_ADNPESC1_BASE_32_H - -/* - * NIOS CPU configuration. (PART OF configs/ADNPESC1.h) - * - * Here we must define CPU dependencies. Any unsupported option have to - * be undefined or defined with zero, example CPU without data cache / OCI: - * - * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096 - * #define CONFIG_SYS_NIOS_CPU_DCACHE 0 - * #undef CONFIG_SYS_NIOS_CPU_OCI_BASE - * #undef CONFIG_SYS_NIOS_CPU_OCI_SIZE - */ - -/* CPU core */ -#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */ -#define CONFIG_SYS_NIOS_CPU_ICACHE (0) /* instruction cache */ -#define CONFIG_SYS_NIOS_CPU_DCACHE (0) /* data cache */ -#define CONFIG_SYS_NIOS_CPU_REG_NUMS 512 /* number of register */ -#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_STACK 0x03000000 /* stack top addr */ -#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x02000000 /* IRQ vectors addr */ -#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */ -#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */ -#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */ -#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */ - /* yes(1) */ - -/* The offset address in flash to check for the Nios signature "Ni". - * (see GM_FlashExec in germs_monitor.s) */ -#define CONFIG_SYS_NIOS_CPU_EXES_OFFS 0x0C - -/* on-chip extensions */ -#undef CONFIG_SYS_NIOS_CPU_RAM_BASE /* on chip RAM addr */ -#undef CONFIG_SYS_NIOS_CPU_RAM_SIZE /* 64 KB size */ - -#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */ -#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */ - -#undef CONFIG_SYS_NIOS_CPU_OCI_BASE /* OCI core addr */ -#undef CONFIG_SYS_NIOS_CPU_OCI_SIZE /* size */ - -/* timer */ -#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 1 /* number of timer */ - -#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */ - /* yes(1) */ - -/* serial i/o */ -#define CONFIG_SYS_NIOS_CPU_UART_NUMS 2 /* number of uarts */ - -#define CONFIG_SYS_NIOS_CPU_UART0 0x00000800 /* UART0 addr */ -#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 17 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */ -#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */ -#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */ -#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */ - /* odd(1) */ - /* even(2) */ -#define CONFIG_SYS_NIOS_CPU_UART0_HS 1 /* handshake: no(0) */ - /* crts(1) */ -#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */ - /* yes(1) */ - -#define CONFIG_SYS_NIOS_CPU_UART1 0x00000820 /* UART1 addr */ -#define CONFIG_SYS_NIOS_CPU_UART1_IRQ 18 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */ -#define CONFIG_SYS_NIOS_CPU_UART1_DB 8 /* data bit */ -#define CONFIG_SYS_NIOS_CPU_UART1_SB 1 /* stop bit */ -#define CONFIG_SYS_NIOS_CPU_UART1_PA 0 /* parity none(0) */ - /* odd(1) */ - /* even(2) */ -#define CONFIG_SYS_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */ - /* crts(1) */ -#define CONFIG_SYS_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */ - /* yes(1) */ - -/* serial peripheral i/o */ -#define CONFIG_SYS_NIOS_CPU_SPI_NUMS 1 /* number of spis */ - -#define CONFIG_SYS_NIOS_CPU_SPI0 0x000008c0 /* SPI0 addr */ -#define CONFIG_SYS_NIOS_CPU_SPI0_IRQ 25 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_SPI0_BITS 16 /* data bit */ -#define CONFIG_SYS_NIOS_CPU_SPI0_MA 1 /* is master: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_SPI0_SLN 1 /* num slaves */ -#define CONFIG_SYS_NIOS_CPU_SPI0_TCLK 250000 /* clock (Hz) */ -#define CONFIG_SYS_NIOS_CPU_SPI0_TDELAY 2 /* delay (usec) */ -#define CONFIG_SYS_NIOS_CPU_SPI0_FB 0 /* first bit msb(0) */ - /* lsb(1) */ - -/* parallel i/o */ -#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 14 /* number of parports */ - -#define CONFIG_SYS_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO0_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 8 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 0 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 8 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO2 0x00000880 /* PIO2 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 4 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 0 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO3 0x00000890 /* PIO3 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO3 0x00000890 /* PIO3 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO4 0x000008a0 /* PIO4 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO5 0x000008b0 /* PIO5 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO5_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO6 0x00000900 /* PIO6 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO6_IRQ 20 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 2 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 1 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO7 0x00000910 /* PIO7 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO7_IRQ 31 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 2 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 1 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO8 0x00000920 /* PIO8 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO8_IRQ 32 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO8_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO8_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO8_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO8_EDGE 2 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO8_ITYPE 1 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO9 0x00000930 /* PIO9 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO9_IRQ 33 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO9_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO9_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO9_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO9_EDGE 2 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO9_ITYPE 1 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO10 0x00000940 /* PIO10 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO10_IRQ 34 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO10_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO10_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO10_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO10_EDGE 2 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO10_ITYPE 1 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO11 0x00000950 /* PIO11 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO11_IRQ 35 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO11_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO11_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO11_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO11_EDGE 2 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO11_ITYPE 1 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO12 0x00000960 /* PIO12 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO12_IRQ 36 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO12_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO12_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO12_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO12_EDGE 2 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO12_ITYPE 1 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO13 0x00000970 /* PIO113 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO13_IRQ 37 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO13_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO13_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO13_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO13_EDGE 2 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO13_ITYPE 1 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -/* IDE i/f */ -#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 2 /* number of IDE contr. */ - -#define CONFIG_SYS_NIOS_CPU_IDE0 0x00001000 /* IDE0 addr */ -#define CONFIG_SYS_NIOS_CPU_IDE0_IRQ 36 /* IRQ */ - -#define CONFIG_SYS_NIOS_CPU_IDE1 0x00001020 /* IDE1 addr */ -#define CONFIG_SYS_NIOS_CPU_IDE1_IRQ 37 /* IRQ */ - -/* memory accessibility */ -#undef CONFIG_SYS_NIOS_CPU_SRAM_BASE /* board SRAM addr */ -#undef CONFIG_SYS_NIOS_CPU_SRAM_SIZE /* 1 MB size */ - -#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x02000000 /* board SDRAM addr */ -#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */ - -#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x01000000 /* board Flash addr */ -#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */ - -/* LAN */ -#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */ - -#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */ -#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS (0) /* offset */ -#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 20 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 16 /* buswidth*/ -#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */ - /* cs8900(1) */ - /* ex: openmac(2) */ - /* ex: alteramac(3) */ - -/* external extension */ -#define CONFIG_SYS_NIOS_CPU_CS0_BASE 0x40000000 /* board EXT0 addr */ -#define CONFIG_SYS_NIOS_CPU_CS0_SIZE (16*1024*1024) /* max. 16 MB size */ - -#define CONFIG_SYS_NIOS_CPU_CS1_BASE 0x41000000 /* board EXT1 addr */ -#define CONFIG_SYS_NIOS_CPU_CS1_SIZE (16*1024*1024) /* max. 16 MB size */ - -#define CONFIG_SYS_NIOS_CPU_CS2_BASE 0x42000000 /* board EXT2 addr */ -#define CONFIG_SYS_NIOS_CPU_CS2_SIZE (16*1024*1024) /* max. 16 MB size */ - -#define CONFIG_SYS_NIOS_CPU_CS3_BASE 0x43000000 /* board EXT3 addr */ -#define CONFIG_SYS_NIOS_CPU_CS3_SIZE (16*1024*1024) /* max. 16 MB size */ - -/* symbolic redefinition (undef, if not present) */ -#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/ -#undef CONFIG_SYS_NIOS_CPU_USER_TIMER /* TIMERx: users choice */ - -#define CONFIG_SYS_NIOS_CPU_PORTA_PIO 0 /* PIO0: Port A */ -#define CONFIG_SYS_NIOS_CPU_PORTB_PIO 1 /* PIO1: Port D */ -#define CONFIG_SYS_NIOS_CPU_PORTC_PIO 2 /* PIO2: Port C */ -#define CONFIG_SYS_NIOS_CPU_RCM_PIO 3 /* PIO3: RCM jumper */ -#define CONFIG_SYS_NIOS_CPU_WDENA_PIO 4 /* PIO4: watchdog enable*/ -#define CONFIG_SYS_NIOS_CPU_WDTOG_PIO 5 /* PIO5: watchdog trigg.*/ - -/* PIOx: LED bar */ -#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */ -#define CONFIG_SYS_NIOS_CPU_LED_PIO CONFIG_SYS_NIOS_CPU_PORTA_PIO -#else -#undef CONFIG_SYS_NIOS_CPU_LED_PIO /* no LED bar */ -#endif - -#endif /* __CONFIG_ADNPESC1_BASE_32_H */ diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h deleted file mode 100644 index cdc488b38e2..00000000000 --- a/include/configs/DK1C20.h +++ /dev/null @@ -1,555 +0,0 @@ -/* - * (C) Copyright 2003, Psyent Corporation <www.psyent.com> - * Scott McNutt <smcnutt@psyent.com> - * Stephan Linz <linz@li-pro.net> - * - * CompactFlash/IDE: - * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*********************************************************************** - * Include the whole NIOS CPU configuration. - * - * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!! - * - ***********************************************************************/ - -#if defined(CONFIG_NIOS_SAFE_32) -#include <configs/DK1C20_safe_32.h> -#elif defined(CONFIG_NIOS_STANDARD_32) -#include <configs/DK1C20_standard_32.h> -#else -#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration -#endif - -/*------------------------------------------------------------------------ - * BOARD/CPU -- TOP-LEVEL - *----------------------------------------------------------------------*/ -#define CONFIG_NIOS 1 /* NIOS-32 core */ -#define CONFIG_DK1C20 1 /* Cyclone DK-1C20 board*/ -#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */ -#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ - -/*------------------------------------------------------------------------ - * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM) - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0) - -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE - -#else -#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config -#endif - -#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE -#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE -#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE - -/*------------------------------------------------------------------------ - * MEMORY ORGANIZATION - For the most part, you can put things pretty - * much anywhere. This is pretty flexible for Nios. So here we make some - * arbitrary choices & assume that the monitor is placed at the end of - * a memory resource (so you must make sure TEXT_BASE is chosen - * appropriately). - * - * -The heap is placed below the monitor. - * -Global data is placed below the heap. - * -The stack is placed below global data (&grows down). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET - -/*------------------------------------------------------------------------ - * FLASH (AM29LV065D) - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) - -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */ - -#else -#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * ENVIRONMENT - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) - -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ -#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */ -#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ -#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */ - -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */ -#endif - -/*------------------------------------------------------------------------ - * CONSOLE - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0) - -#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */ - -#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0) -#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ -#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR -#else -#undef CONFIG_SYS_NIOS_FIXEDBAUD -#define CONFIG_BAUDRATE 115200 -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT, - * so an avalon bus timer is required. - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) - -#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0) - -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */ -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ - -#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ - -#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ) -#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ -#endif - -#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ - -#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */ - -#if (CONFIG_SYS_HZ <= 1000) -#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 -#endif - -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - -#else -#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct -#endif - -#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1) - -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */ -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ - -#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ - -#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ) -#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ -#endif - -#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ - -#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */ - -#if (CONFIG_SYS_HZ <= 1000) -#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 -#endif - -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - -#else -#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct -#endif - -#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */ - -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * Ethernet - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ - -#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) -#define CONFIG_SMC_USE_32_BIT 1 -#else /* no */ -#undef CONFIG_SMC_USE_32_BIT -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ - - /********************************************/ - /* !!! CS8900 is __not__ tested on NIOS !!! */ - /********************************************/ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* Using CS8900 */ -#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \ - CONFIG_SYS_NIOS_CPU_LAN0_OFFS) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) -#undef CONFIG_CS8900_BUS16 -#define CONFIG_CS8900_BUS32 -#else /* no */ -#define CONFIG_CS8900_BUS16 -#undef CONFIG_CS8900_BUS32 -#endif - -#else -#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config -#endif - -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.2.21 -#define CONFIG_SERVERIP 192.168.2.16 - -#else -#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h -#endif - -/*------------------------------------------------------------------------ - * STATUS LEDs - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) - -#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2) - -#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2 -#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS -#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1) -#define STATUS_LED_WRONLY 1 -#else -#undef STATUS_LED_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h - -#else -#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case -#endif - -#define CONFIG_STATUS_LED 1 /* enable status led driver */ - -#define STATUS_LED_BIT (1 << 0) /* LED[0] */ -#define STATUS_LED_STATE STATUS_LED_BLINKING -#define STATUS_LED_BOOT_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_BOOT 0 /* boot LED */ - -#if (STATUS_LED_BITS > 1) -#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */ -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */ -#define STATUS_LED_RED 1 /* fail LED */ -#endif - -#if (STATUS_LED_BITS > 2) -#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */ -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_YELLOW 2 /* info LED */ -#endif - -#if (STATUS_LED_BITS > 3) -#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */ -#define STATUS_LED_STATE3 STATUS_LED_OFF -#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_GREEN 3 /* info LED */ -#endif - -#define STATUS_LED_PAR 1 /* makes status_led.h happy */ - -#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ - -/*------------------------------------------------------------------------ - * SEVEN SEGMENT LED DISPLAY - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) - -#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3) - -#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3 -#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS -#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1) -#define SEVENSEG_WRONLY 1 -#else -#undef SEVENSEG_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h - -#else -#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case -#endif - -#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */ - -/* - * Dual 7-Segment Display pin assignment -- read more in your - * "Nios Development Board Reference Manual" - * - * - * (U8) HI:D[15..8] (U9) LO:D[7..0] - * ______ ______ - * | D14 | | D6 | - * | | | | - * D9| |D13 D1| |D5 - * |______| |______| ___ - * | D8 | | D0 | | A | - * | | | | F|___|B - * D10| |D12 D2| |D4 | G | - * |______| |______| E|___|C - * D11 * D3 * D * - * D15 D7 DP - * - */ -#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */ -#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */ -#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */ -#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */ -#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */ -#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */ -#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */ -#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */ -#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */ - -#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ - -/*------------------------------------------------------------------------ - * ASMI - Active Serial Memory Interface. - * - * ASMI is for Cyclone devices only and only works when the configuration - * is loaded via JTAG or ASMI. Please see doc/README.dk1c20 for details. - *----------------------------------------------------------------------*/ -#define CONFIG_NIOS_ASMI /* Enable ASMI */ -#define CONFIG_SYS_NIOS_ASMIBASE CONFIG_SYS_NIOS_CPU_ASMI0 /* ASMI base address */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_DISPLAY -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IDE -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG - -/*------------------------------------------------------------------------ - * COMPACT FLASH - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_IDE) -#define CONFIG_IDE_PREINIT /* Implement id_preinit */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR 0x00920a00 /* IDE/ATA base addr */ -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 /* IDE0 offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0040 /* Data IO offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0040 /* Register offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Alternate reg offset */ -#define CONFIG_SYS_ATA_STRIDE 4 /* Width betwix addrs */ -#define CONFIG_DOS_PARTITION - -/* Board-specific cf regs */ -#define CONFIG_SYS_CF_PRESENT 0x009209b0 /* CF Present PIO base */ -#define CONFIG_SYS_CF_POWER 0x009209c0 /* CF Power FET PIO base*/ -#define CONFIG_SYS_CF_ATASEL 0x009209d0 /* CF ATASEL PIO base */ - -#endif - -/*------------------------------------------------------------------------ - * KGDB - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 9600 -#endif - -/*------------------------------------------------------------------------ - * MISC - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "DK1C20 > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#if (CONFIG_SYS_SRAM_SIZE != 0) -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE /* Default load address */ -#else -#undef CONFIG_SYS_LOAD_ADDR -#endif - -#if (CONFIG_SYS_SDRAM_SIZE != 0) -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* SDRAM til stack area */ -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) /* 1MB stack */ -#else -#undef CONFIG_SYS_MEMTEST_START -#undef CONFIG_SYS_MEMTEST_END -#endif - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/DK1C20_safe_32.h b/include/configs/DK1C20_safe_32.h deleted file mode 100644 index 86e4869f13f..00000000000 --- a/include/configs/DK1C20_safe_32.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_DK1C20_SAFE_32_H -#define __CONFIG_DK1C20_SAFE_32_H - -/* - * NIOS CPU configuration. (PART OF configs/DK1C20.h) - * - * !!! TODO !!! TODO !!! - */ -#error *** CONFIG_SYS_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template) - -#endif /* __CONFIG_DK1C20_SAFE_32_H */ diff --git a/include/configs/DK1C20_standard_32.h b/include/configs/DK1C20_standard_32.h deleted file mode 100644 index c08aaae0196..00000000000 --- a/include/configs/DK1C20_standard_32.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_DK1C20_STANDARD_32_H -#define __CONFIG_DK1C20_STANDARD_32_H - -/* - * NIOS CPU configuration. (PART OF configs/DK1C20.h) - * - * Here we must define CPU dependencies. Any unsupported option have to - * be defined with zero, example CPU without data cache / OCI: - * - * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096 - * #define CONFIG_SYS_NIOS_CPU_DCACHE 0 - * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0 - * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0 - */ - -/* CPU core */ -#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */ -#define CONFIG_SYS_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */ -#define CONFIG_SYS_NIOS_CPU_DCACHE (4 * 1024) /* data cache */ -#define CONFIG_SYS_NIOS_CPU_REG_NUMS 256 /* number of register */ -#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_STACK 0x008fff00 /* stack top addr */ -#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */ -#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */ -#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */ -#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */ -#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */ - /* yes(1) */ - -/* on-chip extensions */ -#define CONFIG_SYS_NIOS_CPU_RAM_BASE 0 /* on chip RAM addr */ -#define CONFIG_SYS_NIOS_CPU_RAM_SIZE 0 /* size */ - -#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */ -#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */ - -#define CONFIG_SYS_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */ -#define CONFIG_SYS_NIOS_CPU_OCI_SIZE 256 /* size */ - -/* timer */ -#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 2 /* number of timer */ - -#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */ - /* yes(1) */ - -#define CONFIG_SYS_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_PER 10000 /* periode usec */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */ - /* yes(1) */ - -/* serial i/o */ -#define CONFIG_SYS_NIOS_CPU_UART_NUMS 1 /* number of uarts */ - -#define CONFIG_SYS_NIOS_CPU_UART0 0x00920900 /* UART0 addr */ -#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 25 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */ -#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */ -#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */ -#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */ - /* odd(1) */ - /* even(2) */ -#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */ - /* crts(1) */ -#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */ - /* yes(1) */ - -/* parallel i/o */ -#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 8 /* number of parports */ - -#define CONFIG_SYS_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO0_IRQ 40 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 4 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 11 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 8 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 16 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO5_IRQ 35 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO6_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO7_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -/* IDE i/f */ -#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */ -#define CONFIG_SYS_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */ - -/* active serial memory i/f */ -#define CONFIG_SYS_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */ -#define CONFIG_SYS_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */ -#define CONFIG_SYS_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */ - -/* memory accessibility */ -#define CONFIG_SYS_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */ -#define CONFIG_SYS_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */ - -#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */ -#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */ - -#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */ -#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */ - -/* LAN */ -#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */ - -#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */ -#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */ -#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 30 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/ -#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */ - /* cs8900(1) */ - /* ex: alteramac(2) */ - -/* symbolic redefinition (undef, if not present) */ -#define CONFIG_SYS_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */ -#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/ - -#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */ -#define CONFIG_SYS_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */ -#define CONFIG_SYS_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */ -#define CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */ -#define CONFIG_SYS_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */ -#define CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */ -#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */ -#define CONFIG_SYS_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */ - -#endif /* __CONFIG_DK1C20_STANDARD_32_H */ diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h deleted file mode 100644 index 6e788610fde..00000000000 --- a/include/configs/DK1S10.h +++ /dev/null @@ -1,561 +0,0 @@ -/* - * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*********************************************************************** - * Include the whole NIOS CPU configuration. - * - * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!! - * - ***********************************************************************/ - -#if defined(CONFIG_NIOS_SAFE_32) -#include <configs/DK1S10_safe_32.h> -#elif defined(CONFIG_NIOS_STANDARD_32) -#include <configs/DK1S10_standard_32.h> -#elif defined(CONFIG_NIOS_MTX_LDK_20) -#include <configs/DK1S10_mtx_ldk_20.h> -#else -#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration -#endif - -/*------------------------------------------------------------------------ - * BOARD/CPU -- TOP-LEVEL - *----------------------------------------------------------------------*/ -#define CONFIG_NIOS 1 /* NIOS-32 core */ -#define CONFIG_DK1S10 1 /* Stratix DK-1S10 board*/ -#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */ -#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ - -/*------------------------------------------------------------------------ - * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM) - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0) - -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE - -#else -#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config -#endif - -#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE) - -#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE -#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE - -#else - -#undef CONFIG_SYS_SRAM_BASE -#undef CONFIG_SYS_SRAM_SIZE - -#endif - -#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE - -/*------------------------------------------------------------------------ - * MEMORY ORGANIZATION - For the most part, you can put things pretty - * much anywhere. This is pretty flexible for Nios. So here we make some - * arbitrary choices & assume that the monitor is placed at the end of - * a memory resource (so you must make sure TEXT_BASE is chosen - * appropriately). - * - * -The heap is placed below the monitor. - * -Global data is placed below the heap. - * -The stack is placed below global data (&grows down). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET - -/*------------------------------------------------------------------------ - * FLASH (AM29LV065D) - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) - -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */ - -#else -#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * ENVIRONMENT - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) - -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ - -#if defined(CONFIG_NIOS_STANDARD_32) -#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */ -#elif defined(CONFIG_NIOS_MTX_LDK_20) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -#else -#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR -#endif - -#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ -#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */ - -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */ -#endif - -/*------------------------------------------------------------------------ - * CONSOLE - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0) - -#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */ -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0) -#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ -#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR -#else -#undef CONFIG_SYS_NIOS_FIXEDBAUD -#define CONFIG_BAUDRATE 115200 -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT, - * so an avalon bus timer is required. - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER) - -#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0) - -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */ -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ - -#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ - -#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ) -#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ -#endif - -#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ - -#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */ - -#if (CONFIG_SYS_HZ <= 1000) -#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 -#endif - -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - -#else -#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct -#endif - -#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1) - -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */ -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ - -#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ - -#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ) -#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ -#endif - -#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ - -#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */ - -#if (CONFIG_SYS_HZ <= 1000) -#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 -#endif - -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - -#else -#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct -#endif - -#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */ - -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * Ethernet -- needs work! - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ - -#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) -#define CONFIG_SMC_USE_32_BIT 1 -#else /* no */ -#undef CONFIG_SMC_USE_32_BIT -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ - - /********************************************/ - /* !!! CS8900 is __not__ tested on NIOS !!! */ - /********************************************/ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* Using CS8900 */ -#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \ - CONFIG_SYS_NIOS_CPU_LAN0_OFFS) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) -#undef CONFIG_CS8900_BUS16 -#define CONFIG_CS8900_BUS32 -#else /* no */ -#define CONFIG_CS8900_BUS16 -#undef CONFIG_CS8900_BUS32 -#endif - -#else -#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config -#endif - -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.2.21 -#define CONFIG_SERVERIP 192.168.2.16 - -#else -#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h -#endif - -/*------------------------------------------------------------------------ - * STATUS LEDs - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO) - -#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2) - -#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2 -#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS -#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1) -#define STATUS_LED_WRONLY 1 -#else -#undef STATUS_LED_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h - -#else -#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case -#endif - -#define CONFIG_STATUS_LED 1 /* enable status led driver */ - -#define STATUS_LED_BIT (1 << 0) /* LED[0] */ -#define STATUS_LED_STATE STATUS_LED_BLINKING -#define STATUS_LED_BOOT_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_BOOT 0 /* boot LED */ - -#if (STATUS_LED_BITS > 1) -#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */ -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */ -#define STATUS_LED_RED 1 /* fail LED */ -#endif - -#if (STATUS_LED_BITS > 2) -#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */ -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_YELLOW 2 /* info LED */ -#endif - -#if (STATUS_LED_BITS > 3) -#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */ -#define STATUS_LED_STATE3 STATUS_LED_OFF -#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_GREEN 3 /* info LED */ -#endif - -#define STATUS_LED_PAR 1 /* makes status_led.h happy */ - -#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ - -/*------------------------------------------------------------------------ - * SEVEN SEGMENT LED DISPLAY - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO) - -#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3) - -#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3 -#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS -#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1) -#define SEVENSEG_WRONLY 1 -#else -#undef SEVENSEG_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h - -#else -#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case -#endif - -#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */ - -/* - * Dual 7-Segment Display pin assignment -- read more in your - * "Nios Development Board Reference Manual" - * - * - * (U8) HI:D[15..8] (U9) LO:D[7..0] - * ______ ______ - * | D14 | | D6 | - * | | | | - * D9| |D13 D1| |D5 - * |______| |______| ___ - * | D8 | | D0 | | A | - * | | | | F|___|B - * D10| |D12 D2| |D4 | G | - * |______| |______| E|___|C - * D11 * D3 * D * - * D15 D7 DP - * - */ -#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */ -#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */ -#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */ -#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */ -#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */ -#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */ -#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */ -#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */ -#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */ - -#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_DISPLAY -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_REISER -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG - -/*------------------------------------------------------------------------ - * KGDB - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 9600 -#endif - -/*------------------------------------------------------------------------ - * MISC - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "DK1S10 > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* Default load address */ -#if (CONFIG_SYS_SRAM_SIZE != 0) - -/* default in SRAM */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE - -#elif (CONFIG_SYS_SDRAM_SIZE != 0) - -/* default in SDRAM */ -#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) -#else -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE -#endif - -#else -#undef CONFIG_SYS_LOAD_ADDR /* force error break */ -#endif - - -/* MEM test area */ -#if (CONFIG_SYS_SDRAM_SIZE != 0) - -/* SDRAM begin to stack area (1MB stack) */ -#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) -#else -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) -#endif - -#else -#undef CONFIG_SYS_MEMTEST_START /* force error break */ -#undef CONFIG_SYS_MEMTEST_END -#endif - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/DK1S10_mtx_ldk_20.h b/include/configs/DK1S10_mtx_ldk_20.h deleted file mode 100644 index 87a8a543807..00000000000 --- a/include/configs/DK1S10_mtx_ldk_20.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_DK1S10_MTX_LDK_20_H -#define __CONFIG_DK1S10_MTX_LDK_20_H - -/* - * NIOS CPU configuration. (PART OF configs/DK1S10.h) - * - * Here we must define CPU dependencies. Any unsupported option have to - * be defined with zero, example CPU without data cache / OCI: - * - * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096 - * #define CONFIG_SYS_NIOS_CPU_DCACHE 0 - * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0 - * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0 - */ - -/* CPU core */ -#define CONFIG_SYS_NIOS_CPU_CLK 75000000 /* NIOS CPU clock */ -#define CONFIG_SYS_NIOS_CPU_ICACHE (0) /* instruction cache */ -#define CONFIG_SYS_NIOS_CPU_DCACHE (0) /* data cache */ -#define CONFIG_SYS_NIOS_CPU_REG_NUMS 512 /* number of register */ -#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_STACK 0x02000000 /* stack top addr */ -#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x01000000 /* IRQ vectors addr */ -#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */ -#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */ -#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */ -#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */ - /* yes(1) */ - -/* The offset address in flash to check for the Nios signature "Ni". - * (see GM_FlashExec in germs_monitor.s) */ -#define CONFIG_SYS_NIOS_CPU_EXES_OFFS 0x0C - -/* on-chip extensions */ -#undef CONFIG_SYS_NIOS_CPU_RAM_BASE /* on chip RAM addr */ -#undef CONFIG_SYS_NIOS_CPU_RAM_SIZE /* 64 KB size */ - -#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */ -#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */ - -#undef CONFIG_SYS_NIOS_CPU_OCI_BASE /* OCI core addr */ -#undef CONFIG_SYS_NIOS_CPU_OCI_SIZE /* size */ - -/* timer */ -#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 1 /* number of timer */ - -#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */ - /* yes(1) */ - -/* serial i/o */ -#define CONFIG_SYS_NIOS_CPU_UART_NUMS 2 /* number of uarts */ - -#define CONFIG_SYS_NIOS_CPU_UART0 0x00000800 /* UART0 addr */ -#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 17 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */ -#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */ -#define CONFIG_SYS_NIOS_CPU_UART0_SB 2 /* stop bit */ -#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */ - /* odd(1) */ - /* even(2) */ -#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */ - /* crts(1) */ -#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */ - /* yes(1) */ - -#define CONFIG_SYS_NIOS_CPU_UART1 0x000008a0 /* UART1 addr */ -#define CONFIG_SYS_NIOS_CPU_UART1_IRQ 18 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */ -#define CONFIG_SYS_NIOS_CPU_UART1_DB 8 /* data bit */ -#define CONFIG_SYS_NIOS_CPU_UART1_SB 1 /* stop bit */ -#define CONFIG_SYS_NIOS_CPU_UART1_PA 0 /* parity none(0) */ - /* odd(1) */ - /* even(2) */ -#define CONFIG_SYS_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */ - /* crts(1) */ -#define CONFIG_SYS_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */ - /* yes(1) */ - -/* parallel i/o */ -#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 2 /* number of parports */ - -#define CONFIG_SYS_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO0_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 4 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -/* IDE i/f */ -#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */ -#define CONFIG_SYS_NIOS_CPU_IDE0 0x00000900 /* IDE0 addr */ -#define CONFIG_SYS_NIOS_CPU_IDE0_IRQ 25 /* IRQ */ - -/* memory accessibility */ -#undef CONFIG_SYS_NIOS_CPU_SRAM_BASE /* board SRAM addr */ -#undef CONFIG_SYS_NIOS_CPU_SRAM_SIZE /* 1 MB size */ - -#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */ -#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */ - -#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00800000 /* board Flash addr */ -#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */ - -/* LAN */ -#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */ - -#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */ -#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */ -#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 20 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/ -#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */ - /* cs8900(1) */ - /* ex: openmac(2) */ - /* ex: alteramac(3) */ - -/* symbolic redefinition (undef, if not present) */ -#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/ -#undef CONFIG_SYS_NIOS_CPU_USER_TIMER /* TIMERx: users choice */ - -#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 0 /* PIO0: CF power/sw. */ -#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 1 /* PIO1: buttons */ -#undef CONFIG_SYS_NIOS_CPU_LCD_PIO /* PIOx: ASCII LCD */ -#undef CONFIG_SYS_NIOS_CPU_LED_PIO /* PIOx: LED bar */ -#undef CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO /* PIOx: 7-seg. display */ -#undef CONFIG_SYS_NIOS_CPU_RECONF_PIO /* PIOx: reconf pin */ -#undef CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO /* PIOx: CF present IRQ */ -#undef CONFIG_SYS_NIOS_CPU_CFATASEL_PIO /* PIOx: CF ATA select */ - -#endif /* __CONFIG_DK1S10_MTX_LDK_20_H */ diff --git a/include/configs/DK1S10_safe_32.h b/include/configs/DK1S10_safe_32.h deleted file mode 100644 index ced4ef281ce..00000000000 --- a/include/configs/DK1S10_safe_32.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_DK1S10_SAFE_32_H -#define __CONFIG_DK1S10_SAFE_32_H - -/* - * NIOS CPU configuration. (PART OF configs/DK1S10.h) - * - * !!! TODO !!! TODO !!! - */ -#error *** CONFIG_SYS_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template) - -#endif /* __CONFIG_DK1S10_SAFE_32_H */ diff --git a/include/configs/DK1S10_standard_32.h b/include/configs/DK1S10_standard_32.h deleted file mode 100644 index e6ccaf57ab0..00000000000 --- a/include/configs/DK1S10_standard_32.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_DK1S10_STANDARD_32_H -#define __CONFIG_DK1S10_STANDARD_32_H - -/* - * NIOS CPU configuration. (PART OF configs/DK1S10.h) - * - * Here we must define CPU dependencies. Any unsupported option have to - * be defined with zero, example CPU without data cache / OCI: - * - * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096 - * #define CONFIG_SYS_NIOS_CPU_DCACHE 0 - * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0 - * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0 - */ - -/* CPU core */ -#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */ -#define CONFIG_SYS_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */ -#define CONFIG_SYS_NIOS_CPU_DCACHE (4 * 1024) /* data cache */ -#define CONFIG_SYS_NIOS_CPU_REG_NUMS 256 /* number of register */ -#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_STACK 0x008fff00 /* stack top addr */ -#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */ -#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */ -#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */ -#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */ -#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */ - /* yes(1) */ - -/* on-chip extensions */ -#define CONFIG_SYS_NIOS_CPU_RAM_BASE 0x00900000 /* on chip RAM addr */ -#define CONFIG_SYS_NIOS_CPU_RAM_SIZE (64 * 1024) /* 64 KB size */ - -#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */ -#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */ - -#define CONFIG_SYS_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */ -#define CONFIG_SYS_NIOS_CPU_OCI_SIZE 256 /* size */ - -/* timer */ -#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 2 /* number of timer */ - -#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */ - /* yes(1) */ - -#define CONFIG_SYS_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_PER 10000 /* periode usec */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */ - /* yes(1) */ - -/* serial i/o */ -#define CONFIG_SYS_NIOS_CPU_UART_NUMS 1 /* number of uarts */ - -#define CONFIG_SYS_NIOS_CPU_UART0 0x00920900 /* UART0 addr */ -#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 25 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */ -#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */ -#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */ -#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */ - /* odd(1) */ - /* even(2) */ -#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */ - /* crts(1) */ -#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */ - /* yes(1) */ - -/* parallel i/o */ -#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 8 /* number of parports */ - -#define CONFIG_SYS_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO0_IRQ 40 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 4 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 11 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 8 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 16 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */ -#define CONFIG_SYS_NIOS_CPU_PIO5_IRQ 35 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO6_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -#define CONFIG_SYS_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */ -#undef CONFIG_SYS_NIOS_CPU_PIO7_IRQ /* w/o IRQ */ -#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */ -#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */ - /* out(1) */ - /* in(2) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */ - /* yes(1) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */ - /* fall(1) */ - /* rise(2) */ - /* any(3) */ -#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */ - /* level(1)*/ - /* edge(2) */ - -/* IDE i/f */ -#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */ -#define CONFIG_SYS_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */ - -/* memory accessibility */ -#define CONFIG_SYS_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */ -#define CONFIG_SYS_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */ - -#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */ -#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */ - -#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */ -#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */ - -/* LAN */ -#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */ - -#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */ -#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */ -#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 30 /* IRQ */ -#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/ -#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */ - /* cs8900(1) */ - /* ex: alteramac(2) */ - -/* symbolic redefinition (undef, if not present) */ -#define CONFIG_SYS_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */ -#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/ - -#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */ -#define CONFIG_SYS_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */ -#define CONFIG_SYS_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */ -#define CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */ -#define CONFIG_SYS_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */ -#define CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */ -#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */ -#define CONFIG_SYS_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */ - -#endif /* __CONFIG_DK1S10_STANDARD_32_H */ |