summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/a4m072.h2
-rw-r--r--include/configs/bct-brettl2.h24
-rw-r--r--include/configs/blackvme.h4
-rw-r--r--include/configs/mx1ads.h5
-rw-r--r--include/configs/mx1fs2.h5
-rw-r--r--include/configs/scb9328.h15
6 files changed, 15 insertions, 40 deletions
diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index 20c119aede1..b5d20bd7b25 100644
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -79,7 +79,7 @@
#define CONFIG_SYS_XLB_PIPELINING 1
#undef CONFIG_NET_MULTI
-#undef CONFIG_EEPRO100
+#undef CONFIG_EEPRO100
/* Partitions */
#define CONFIG_MAC_PARTITION
diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h
index 09691d37377..608ab9f41a4 100644
--- a/include/configs/bct-brettl2.h
+++ b/include/configs/bct-brettl2.h
@@ -11,7 +11,7 @@
/*
* Processor Settings
*/
-#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
+#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
/*
@@ -21,11 +21,11 @@
*/
/* CONFIG_CLKIN_HZ is any value in Hz */
#define CONFIG_CLKIN_HZ 16384000
-/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
-/* 1 = CLKIN / 2 */
+/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
+/* 1 = CLKIN / 2 */
#define CONFIG_CLKIN_HALF 0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
-/* 1 = bypass PLL */
+/* 1 = bypass PLL */
#define CONFIG_PLL_BYPASS 0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
/* Values can range from 0-63 (where 0 means 64) */
@@ -36,7 +36,7 @@
/* SCLK_DIV controls the system clock divider */
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 3
-#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
+#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
/*
@@ -111,13 +111,13 @@
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ arch/blackfin/cpu/traps.o (.text .text.*); \
+ arch/blackfin/cpu/interrupt.o (.text .text.*); \
+ arch/blackfin/cpu/serial.o (.text .text.*); \
+ common/dlmalloc.o (.text .text.*); \
+ lib/crc32.o (.text .text.*); \
+ . = DEFINED(env_offset) ? env_offset : .; \
+ common/env_embedded.o (.text .text.*);
#endif
diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h
index 8b2bdc715d6..e4688a27b4a 100644
--- a/include/configs/blackvme.h
+++ b/include/configs/blackvme.h
@@ -126,9 +126,9 @@
* AX88180 WEN = 5 clocks REN 6 clocks @ SCLK = 100 MHz
* One extra clock needed because AX88180 is asynchronous to CPU.
*/
- /* bank 1 0 */
+ /* bank 1 0 */
#define CONFIG_EBIU_AMBCTL0_VAL 0xFFC2FFC2
- /* bank 3 2 */
+ /* bank 3 2 */
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC2FFC2
/* memory layout */
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 21b7ec7e1b2..166da6ca7fd 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -60,8 +60,6 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-
/*
* CS8900 Ethernet drivers
*/
@@ -79,7 +77,6 @@
#define CONFIG_BAUDRATE 115200
-
/*
* BOOTP options
*/
@@ -88,7 +85,6 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
@@ -98,7 +94,6 @@
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_ELF
-
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
#define CONFIG_BOOTFILE "mx1ads"
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index 0641befeb17..1632ce82ba3 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -34,7 +34,6 @@
#undef _CONFIG_UART4 /* internal uart 4 */
#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
-
/*
* BOOTP options
*/
@@ -43,7 +42,6 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
@@ -58,7 +56,6 @@
#undef CONFIG_CMD_PING
#undef CONFIG_CMD_SOURCE
-
/*
* Boot options. Setting delay to -1 stops autostart count down.
*/
@@ -98,8 +95,6 @@
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
-
-
#define CONFIG_STACKSIZE (120<<10) /* stack size */
#ifdef CONFIG_USE_IRQ
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index c0ae2d9d240..3da214e99dd 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -35,7 +35,6 @@
* Select serial console configuration
*/
-
/*
* BOOTP options
*/
@@ -44,7 +43,6 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
@@ -58,7 +56,6 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_SOURCE
-
/*
* Boot options. Setting delay to -1 stops autostart count down.
* NOTE: Sending parameters to kernel depends on kernel version and
@@ -100,14 +97,11 @@
#define CONFIG_INITRD_TAG 1 /* send initrd params */
#undef CONFIG_VFD /* do not send framebuffer setup */
-
/*
* Malloc pool need to host env + 128 Kb reserve for other allocations.
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
-
-
#define CONFIG_STACKSIZE (120<<10) /* stack size */
#ifdef CONFIG_USE_IRQ
@@ -134,15 +128,6 @@
#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */
/*
- * Flash Controller settings
- */
-
-/*
- * Hardware drivers
- */
-
-
-/*
* Configuration for FLASH memory for the Synertronixx board
*/
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-06 22:39:33 +0000