diff options
Diffstat (limited to 'include/configs')
358 files changed, 18140 insertions, 6977 deletions
diff --git a/include/configs/A3000.h b/include/configs/A3000.h index ca9592c23bc..0a9a1ff90c8 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -52,23 +52,20 @@ #define CONFIG_BOOTDELAY 5 -#if 0 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_FLASH | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_NET | \ - CFG_CMD_PCI ) -#endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> /* @@ -309,7 +306,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h index 821efe5d48b..46329918ef1 100644 --- a/include/configs/ADCIOP.h +++ b/include/configs/ADCIOP.h @@ -59,21 +59,32 @@ #define CONFIG_IPADDR 10.0.18.222 #define CONFIG_SERVERIP 10.0.18.190 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -185,7 +196,7 @@ */ #define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */ #define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h index 2efca1056e9..77938b140da 100644 --- a/include/configs/ADNPESC1.h +++ b/include/configs/ADNPESC1.h @@ -401,15 +401,8 @@ #define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */ #define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */ -#define __SPI_CMD_OFF 0 /* allow default commands: */ - /* CFG_CMD_SPI */ - /* CFG_CMD_DATE */ - #else #undef CONFIG_NIOS_SPI /* NO SPI support */ -#define __SPI_CMD_OFF ( CFG_CMD_SPI \ - | CFG_CMD_DATE \ - ) #endif /*------------------------------------------------------------------------ @@ -570,45 +563,55 @@ #define CONFIG_POST CFG_POST_RTC #define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_MMC | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_SCSI | \ - CFG_CMD_VFD | \ - CFG_CMD_USB | \ - CFG_CMD_XIMG | \ - __SPI_CMD_OFF ) ) - - -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_CACHE +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_XIMG + +#if (CFG_NIOS_CPU_SPI_NUMS != 1) +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_DATE +#endif /*------------------------------------------------------------------------ * KGDB *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 9600 #endif @@ -651,7 +654,6 @@ #undef CFG_LOAD_ADDR /* force error break */ #endif - /* MEM test area */ #if (CFG_SDRAM_SIZE != 0) diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h index df20965640e..2ee8c61cea4 100644 --- a/include/configs/ADS860.h +++ b/include/configs/ADS860.h @@ -37,13 +37,19 @@ #define CONFIG_DRAM_50MHZ 1 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_PCMCIA \ - | CFG_CMD_PING \ - ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_PING + +/* This is picked up again in fads.h */ +#define FADS_COMMANDS_ALREADY_DEFINED #include "fads.h" diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h index 14d56bfd97d..6f640380739 100644 --- a/include/configs/AMX860.h +++ b/include/configs/AMX860.h @@ -61,7 +61,25 @@ #undef CONFIG_BOOTARGS -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + + +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -70,29 +88,22 @@ #endif -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) - -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_SUBNETMASK -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -196,7 +207,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index ba4b1a2bc8c..d25aa74a452 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -66,18 +66,28 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_IRQ | \ - CFG_CMD_MVENV | \ - CFG_CMD_PCI | \ - CFG_CMD_PING \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MVENV +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -89,7 +99,7 @@ * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -188,7 +198,7 @@ */ #define CFG_DCACHE_SIZE 16384 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -228,7 +238,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 3df99a008b9..f6495e4841a 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -67,27 +67,38 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -106,7 +117,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -266,7 +277,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/AR405.h b/include/configs/AR405.h index 1cd0280e217..0f301ec0c6a 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -71,17 +71,29 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_BSP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -92,7 +104,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -207,7 +219,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index d03c05bf349..9adbba95441 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -53,25 +53,41 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -91,7 +107,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -132,40 +148,18 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff @@ -270,7 +264,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 0e6b50f8b0e..4304ecca7de 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -52,15 +52,26 @@ #define CFG_8xx_CPUCLK_MAX 133000000 #endif /* CONFIG_MPC852T */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */ diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h new file mode 100644 index 00000000000..a4f7f9a28fb --- /dev/null +++ b/include/configs/AdderUSB.h @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2006 CodeHermit. + * Bryan O'Donoghue <bodonoghue@codehermit.ie> + * + * Provides support for USB console on the Analogue & Micro Adder87x + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ADDERUSB__ +#define __ADDERUSB__ + +/* Include the board port */ +#include "Adder.h" + +#define CONFIG_USB_DEVICE /* Include UDC driver */ +#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */ +#define CFG_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */ +#define CFG_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */ +#define CFG_CONSOLE_IS_IN_ENV /* Console is in env */ + +/* If you have a USB-IF assigned VendorID then you may wish to define + * your own vendor specific values either in BoardName.h or directly in + * usbd_vendor_info.h + */ + +/* +#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie" +#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot" +#define CONFIG_USBD_VENDORID 0xFFFF +#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF +#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE +*/ + +#endif /* __ADDERUSB_H__ */ diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index c08b2c39f88..3f2f6140f63 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -39,12 +39,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -70,31 +64,40 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #define CONFIG_NET_MULTI #define CONFIG_MII -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Autobooting */ @@ -282,7 +285,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -298,6 +301,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h index ea50f41504c..d914dccfbb4 100644 --- a/include/configs/AmigaOneG3SE.h +++ b/include/configs/AmigaOneG3SE.h @@ -56,38 +56,46 @@ #define CONFIG_BOOTARGS "root=/dev/ram rw ramdisk=4096" -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_AMIGA_PARTITION -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_NET | \ - CFG_CMD_IDE | \ - CFG_CMD_FDC | \ - CFG_CMD_CACHE | \ - CFG_CMD_CONSOLE| \ - CFG_CMD_USB | \ - CFG_CMD_BSP | \ - CFG_CMD_PCI ) - -/* CFG_CMD_MII | \ */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NET +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FDC +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CONSOLE| +#define CONFIG_CMD_USB +#define CONFIG_CMD_BSP +#define CONFIG_CMD_PCI + #define CONFIG_PCI 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> - +#define atoi(x) simple_strtoul(x,NULL,10) /* * Miscellaneous configurable options @@ -247,7 +255,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -348,8 +356,6 @@ #define CONFIG_3COM /* #define CONFIG_BOOTP_RANDOM_DELAY */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) /* * USB configuration diff --git a/include/configs/B2.h b/include/configs/B2.h index e55858d34bc..f1411db66c3 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -72,16 +72,26 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C ) +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 #define CONFIG_ETHADDR 00:50:c2:1e:af:fb diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index 46bdfa2ee62..c11e9c911d3 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -66,14 +66,30 @@ #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 |\ - CFG_CMD_SCSI | CFG_CMD_IDE | CFG_CMD_DATE |\ - CFG_CMD_FDC | CFG_CMD_ELF) +#define CONFIG_CMD_PCI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_FDC +#define CONFIG_CMD_ELF -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -86,7 +102,7 @@ */ #define CONFIG_CONS_INDEX 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -436,7 +452,7 @@ extern unsigned long bab7xx_get_gclk_freq (void); * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 5b54f30e08d..5c2bfc991f5 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -61,11 +61,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -106,12 +101,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#ifdef CONFIG_PCI -# define ADD_PCI_CMD CFG_CMD_PCI -#else -# define ADD_PCI_CMD 0 -#endif - /* * Video console */ @@ -126,12 +115,6 @@ # define CONFIG_SPLASH_SCREEN # define CFG_CONSOLE_IS_IN_ENV -#ifdef CONFIG_VIDEO -# define ADD_BMP_CMD CFG_CMD_BMP -#else -# define ADD_BMP_CMD 0 -#endif - /* * Partitions */ @@ -144,10 +127,7 @@ */ #ifdef CONFIG_BC3450_USB # define CONFIG_USB_OHCI -# define ADD_USB_CMD CFG_CMD_USB # define CONFIG_USB_STORAGE -#else /* !CONFIG_BC3450_USB */ -# define ADD_USB_CMD 0 #endif /* CONFIG_BC3450_USB */ /* @@ -158,66 +138,69 @@ CFG_POST_I2C) #ifdef CONFIG_POST -# define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ # define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -# define CFG_CMD_POST_DIAG 0 #endif /* CONFIG_POST */ -/* - * IDE - */ -#ifdef CONFIG_BC3450_IDE -# define ADD_IDE_CMD CFG_CMD_IDE -#else -# define ADD_IDE_CMD 0 -#endif /* CONFIG_BC3450_IDE */ /* - * Filesystem support + * BOOTP options */ -#if defined (CONFIG_BC3450_IDE) || defined (CONFIG_BC3450_USB) -#ifdef CONFIG_FAT -# define ADD_FAT_CMD CFG_CMD_FAT -#else -# define ADD_FAT_CMD 0 -#endif /* CONFIG_FAT */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#ifdef CONFIG_EXT2 -# define ADD_EXT2_CMD CFG_CMD_EXT2 -#else -# define ADD_EXT2_CMD 0 -#endif /* CONFIG_EXT2 */ -#endif /* CONFIG_BC3450_IDE / _USB */ /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_FAT_CMD | \ - ADD_EXT2_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP | \ - CFG_CMD_BSP) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_BSP + +#ifdef CONFIG_VIDEO + #define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_BC3450_IDE + #define CONFIG_CMD_IDE +#endif + +#if defined(CONFIG_BC3450_IDE) || defined(CONFIG_BC3450_USB) + #ifdef CONFIG_FAT + #define CONFIG_CMD_FAT + #endif + + #ifdef CONFIG_EXT2 + #define CONFIG_CMD_EXT2 + #endif +#endif + +#ifdef CONFIG_BC3450_USB + #define CONFIG_CMD_USB +#endif + +#ifdef CONFIG_PCI + #define CONFIG_CMD_PCI +#endif + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -282,17 +265,17 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet - * hasn't been tested with a IPB Bus Clock of 66 MHz. + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ -#if defined(CFG_IPBSPEED_133) -# define CFG_PCISPEED_66 /* define for 66MHz speed */ +#if defined(CFG_IPBCLK_EQUALS_XLBCLK) +# define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif /* @@ -450,7 +433,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -469,9 +452,13 @@ #define CFG_HZ 1000 /* dec freq: 1ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -488,7 +475,7 @@ #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#ifdef CFG_PCISPEED_66 +#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2 # define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ #else # define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 3bd43d83693..bb7856f675d 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -64,28 +64,35 @@ #define CFG_DOC_SUPPORT_2000 1 #define CFG_DOC_SUPPORT_MILLENNIUM 1 #define CFG_DOC_SHORT_TIMEOUT 1 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_ELF | \ - 0 ) -/* CFG_CMD_DOC required legacy NAND support */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DOC +#define CONFIG_CMD_ELF + + +/* CONFIG_CMD_DOC required legacy NAND support */ #define CFG_NAND_LEGACY #if 0 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | \ - CFG_CMD_PCI | CFG_CMD_DOC | CFG_CMD_DATE) - #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ #endif -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> - - /* * Miscellaneous configurable options */ @@ -293,7 +300,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h index e0262a8f674..ae32f6b14ac 100644 --- a/include/configs/CANBT.h +++ b/include/configs/CANBT.h @@ -56,13 +56,26 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_COMMANDS (( CONFIG_CMD_DFL | \ - CFG_CMD_IRQ | \ - CFG_CMD_EEPROM ) & \ - ~CFG_CMD_NET) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_EEPROM + +#undef CONFIG_CMD_NET + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -73,7 +86,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -173,7 +186,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 7ec4599ebb5..0321650f3d2 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -119,24 +119,36 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -155,7 +167,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -387,6 +399,8 @@ #define CFG_ENV_ADDR_REDUND 0xFFFFA000 #define CFG_ENV_SIZE_REDUND 0x2000 +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + #define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ #define CFG_NVRAM_SIZE 242 /* NVRAM size */ @@ -413,7 +427,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CCM.h b/include/configs/CCM.h index e8994ffef79..9f06957d2ff 100644 --- a/include/configs/CCM.h +++ b/include/configs/CCM.h @@ -94,27 +94,35 @@ #define CONFIG_MAC_PARTITION /* nod used yet */ #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 1cca2859f4b..21cd9c1f261 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -60,28 +60,35 @@ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ #define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_BSP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CFG_NAND_LEGACY +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -100,7 +107,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -148,36 +155,18 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff @@ -289,7 +278,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index b882f7a9bfe..aea85233f96 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -54,27 +54,36 @@ #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_FLASH | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP /* @@ -325,7 +334,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 56fd9a6d356..a3717b9052f 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -54,16 +54,29 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -80,7 +93,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -216,7 +229,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 047e2f1eef9..1b948f6382a 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -55,32 +55,43 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_EEPROM -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_EEPROM ) #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -96,7 +107,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -260,7 +271,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index d756f447f7f..fb71c5fb040 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -37,6 +37,7 @@ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ +#undef CONFIG_CPCI405_6U /* enable this for 6U boards */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ @@ -56,28 +57,44 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #if 0 /* test-only */ #define CONFIG_NETCONSOLE @@ -97,11 +114,6 @@ #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -117,7 +129,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -311,7 +323,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 852d94a410a..49943195b72 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -57,38 +57,48 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> -#define CFG_NAND_LEGACY +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -105,7 +115,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -284,7 +294,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 2260327c3f8..29f92924478 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -56,28 +56,44 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #if 0 /* test-only */ #define CONFIG_NETCONSOLE @@ -95,11 +111,6 @@ #undef CONFIG_AUTO_UPDATE /* autoupdate via compactflash */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -115,7 +126,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -314,7 +325,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h index 90d3a8d8fa3..318ada1a4fb 100644 --- a/include/configs/CPCI440.h +++ b/include/configs/CPCI440.h @@ -33,6 +33,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_CPCI440 1 /* Board is ebony */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -171,29 +172,27 @@ #define CONFIG_PHY_ADDR 1 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#if 0 /* test-only */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_KGDB | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF ) -#else -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM ) -/* test-only: support fehlt bisher... */ -/* CFG_CMD_IDE | \*/ -/* CFG_CMD_PCI | \*/ -#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -204,7 +203,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -268,7 +267,7 @@ */ #define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -290,7 +289,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index bc23fc02788..48e29a20876 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -133,29 +133,36 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) - - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ - | CFG_CMD_CACHE \ - | CFG_CMD_EEPROM \ - | CFG_CMD_PCI \ - | CFG_CMD_ELF \ - | CFG_CMD_DATE \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_IDE \ - | CFG_CMD_FAT \ - | CFG_CMD_EXT2 \ - ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + + +#define CONFIG_DOS_PARTITION #define CONFIG_USE_CPCIDVI @@ -179,7 +186,7 @@ #define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -585,7 +592,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index 93d49f3862d..c7b623a1d6d 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -54,15 +54,36 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -73,7 +94,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -189,7 +210,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index 16a9ea5dd71..c589f288789 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -68,9 +68,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. - * + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -163,27 +161,37 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -348,7 +356,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index ce969ecdd18..b087ebaa0bc 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -69,9 +69,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. - * + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -167,27 +165,31 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C #ifdef CONFIG_PCI -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_PCI) -#else /* ! PCI */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C ) -#endif /* CONFIG_PCI */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + #define CONFIG_CMD_PCI +#endif + #define CFG_NAND_LEGACY @@ -196,7 +198,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -369,7 +371,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 63d7a924043..a965c125f3f 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -75,38 +75,42 @@ #define CONFIG_AUTOSCRIPT 1 -#define CONFIG_COMMANDS (\ - CFG_CMD_BDI|\ - CFG_CMD_IMI|\ - CFG_CMD_FLASH|\ - CFG_CMD_MEMORY|\ - CFG_CMD_NET|\ - CFG_CMD_ENV|\ - CFG_CMD_CONSOLE|\ - CFG_CMD_ASKENV|\ - CFG_CMD_ECHO|\ - CFG_CMD_IMMAP|\ - CFG_CMD_REGINFO|\ - CFG_CMD_DHCP|\ - CFG_CMD_DATE|\ - CFG_CMD_RUN|\ - CFG_CMD_I2C|\ - CFG_CMD_EEPROM|\ - CFG_CMD_DIAG|\ - CFG_CMD_AUTOSCRIPT|\ - CFG_CMD_SETGETDCR) +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_ENV +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_SETGETDCR + /* - * optional BOOTP / DHCP fields + * BOOTP options */ -#define CONFIG_BOOTP_MASK (\ - CONFIG_BOOTP_VENDOREX|\ - CONFIG_BOOTP_SUBNETMASK|\ - CONFIG_BOOTP_GATEWAY|\ - CONFIG_BOOTP_DNS|\ - CONFIG_BOOTP_HOSTNAME|\ - CONFIG_BOOTP_BOOTFILESIZE|\ - CONFIG_BOOTP_BOOTPATH) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_VENDOREX +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_BOOTFILESIZE + /* * how many time to fail & restart a net-TFTP before giving up & resetting @@ -123,9 +127,6 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ diff --git a/include/configs/CU824.h b/include/configs/CU824.h index acc84847178..68e816a7443 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -55,21 +55,29 @@ #define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */ #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - 0 /* CFG_CMD_DATE */ | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) +/* + * Command line configuration. */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP /* @@ -278,7 +286,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h index 997e1baa9a7..627ea14826b 100644 --- a/include/configs/DASA_SIM.h +++ b/include/configs/DASA_SIM.h @@ -57,32 +57,35 @@ #define CONFIG_IPADDR 10.0.18.222 #define CONFIG_SERVERIP 10.0.18.190 -#if 0 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_BSP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF ) -#else -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP ) -#endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP + #if 0 /* Does not appear to be used?! If it is used, needs to be fixed */ #define CONFIG_SOFT_I2C /* Software I2C support enabled */ #endif #define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -184,7 +187,7 @@ */ #define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */ #define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index bd7aff12cc1..db2e96c227d 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -215,8 +215,16 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + /* * JFFS2 partitions * @@ -239,17 +247,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #define MTDPARTS_DEFAULT "mtdparts=db64360-1:-(jffs2)" */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ - | CFG_CMD_EEPROM \ - | CFG_CMD_CACHE \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_PCI \ - | CFG_CMD_NET ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET + /* * Miscellaneous configurable options @@ -261,7 +272,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" /* #define CFG_GT_DUAL_CPU also for JTAG even with one cpu */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -558,7 +569,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index 4b72e9b9e40..b5d3f773f38 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -153,8 +153,16 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + /* * JFFS2 partitions * @@ -177,17 +185,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #define MTDPARTS_DEFAULT "mtdparts=db64460-1:-(jffs2)" */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ - | CFG_CMD_EEPROM \ - | CFG_CMD_CACHE \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_PCI \ - | CFG_CMD_NET ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET + /* * Miscellaneous configurable options @@ -199,7 +210,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" /* #define CFG_GT_DUAL_CPU also for JTAG even with one cpu */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -496,7 +507,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h index b58846d8316..0ddf0e3aeb9 100644 --- a/include/configs/DK1C20.h +++ b/include/configs/DK1C20.h @@ -446,46 +446,55 @@ #define CONFIG_NIOS_ASMI /* Enable ASMI */ #define CFG_NIOS_ASMIBASE CFG_NIOS_CPU_ASMI0 /* ASMI base address */ -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_MMC | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_VFD | \ - CFG_CMD_USB | \ - CFG_CMD_XIMG ) ) - - -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_CACHE +#undef CONFIG_CMD_DATE +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_XIMG + /*------------------------------------------------------------------------ * COMPACT FLASH *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(CONFIG_CMD_IDE) #define CONFIG_IDE_PREINIT /* Implement id_preinit */ #define CFG_IDE_MAXBUS 1 /* 1 IDE bus */ #define CFG_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */ @@ -503,12 +512,12 @@ #define CFG_CF_POWER 0x009209c0 /* CF Power FET PIO base*/ #define CFG_CF_ATASEL 0x009209d0 /* CF ATASEL PIO base */ -#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */ +#endif /*------------------------------------------------------------------------ * KGDB *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 9600 #endif diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index 3e3803cd235..0032fd3db71 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -454,47 +454,55 @@ #endif /* CFG_NIOS_CPU_PIO_NUMS */ -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_MMC | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_VFD | \ - CFG_CMD_USB | \ - CFG_CMD_XIMG ) ) - - -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_ASKENV +#undef COND_CMD_BEDBUG +#undef COND_CMD_BMP +#undef COND_CMD_BSP +#undef COND_CMD_CACHE +#undef COND_CMD_DATE +#undef COND_CMD_DOC +#undef COND_CMD_DTT +#undef COND_CMD_EEPROM +#undef COND_CMD_ELF +#undef COND_CMD_FAT +#undef COND_CMD_FDC +#undef COND_CMD_FDOS +#undef COND_CMD_HWFLOW +#undef COND_CMD_IDE +#undef COND_CMD_I2C +#undef COND_CMD_JFFS2 +#undef COND_CMD_KGDB +#undef COND_CMD_NAND +#undef COND_CMD_NFS +#undef COND_CMD_MMC +#undef COND_CMD_MII +#undef COND_CMD_PCI +#undef COND_CMD_PCMCIA +#undef COND_CMD_SCSI +#undef COND_CMD_SPI +#undef COND_CMD_VFD +#undef COND_CMD_USB +#undef COND_CMD_XIMG + /*------------------------------------------------------------------------ * KGDB *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 9600 #endif diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 2ae794dc26c..2eadbea35d6 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -55,17 +55,29 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -87,7 +99,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -235,7 +247,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 5489a539360..5c595f57d26 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -58,21 +58,33 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* BQ3285 is MC146818 compatible*/ @@ -85,7 +97,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -225,7 +237,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index 720b335b099..dae5295dd1b 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -40,9 +40,8 @@ #define CONFIG_MISC_INIT_R -#define FEC_ENET -#define CONFIG_ETHADDR 00:CF:52:82:EB:01 - +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 9600 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -68,17 +67,61 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -/*#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB)) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_LOADB +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:CF:52:82:EB:01 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ #define CONFIG_BOOTDELAY 5 #define CFG_PROMPT "\nEV123 U-Boot> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -110,9 +153,6 @@ */ #define CFG_MBAR 0x40000000 -#define CFG_DISCOVER_PHY -/* #define CFG_ENET_BD_BASE 0x380000 */ - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ @@ -139,6 +179,7 @@ #define CFG_FLASH_BASE 0xFFE00000 #define CFG_INT_FLASH_BASE 0xF0000000 +#define CFG_INT_FLASH_ENABLE 0x21 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 2c99b4b1628..bb771887243 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -66,12 +66,25 @@ #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ #define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2) +#define CONFIG_CMD_PCI +#define CONFIG_CMD_JFFS2 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -84,7 +97,7 @@ */ #define CONFIG_CONS_INDEX 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -317,7 +330,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index e73bcec4485..f927a2c9cca 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -81,7 +81,15 @@ "" #define CONFIG_BOOTCOMMAND "run ramboot" -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ @@ -91,12 +99,15 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE + /* * Miscellaneous configurable options @@ -104,7 +115,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "LEOX_elpt860: " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -224,7 +235,7 @@ */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h index 5507f352b90..cfa6335927a 100644 --- a/include/configs/EP1C20.h +++ b/include/configs/EP1C20.h @@ -160,25 +160,36 @@ #define CONFIG_IPADDR 192.168.2.21 #define CONFIG_SERVERIP 192.168.2.16 -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES + +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_BOOTD +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ITEST +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + /*------------------------------------------------------------------------ * MISC diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h index 6eca9f23dc7..7c526f759e7 100644 --- a/include/configs/EP1S10.h +++ b/include/configs/EP1S10.h @@ -154,25 +154,35 @@ #define CONFIG_IPADDR 192.168.2.21 #define CONFIG_SERVERIP 192.168.2.16 -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES + /*------------------------------------------------------------------------ * MISC diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h index 976e79acb6f..1fe8f68c2e6 100644 --- a/include/configs/EP1S40.h +++ b/include/configs/EP1S40.h @@ -154,25 +154,35 @@ #define CONFIG_IPADDR 192.168.2.21 #define CONFIG_SERVERIP 192.168.2.16 -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES + /*------------------------------------------------------------------------ * MISC diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h index 738763b86ff..89e0eebeead 100644 --- a/include/configs/EP88x.h +++ b/include/configs/EP88x.h @@ -50,15 +50,25 @@ #define CFG_8xx_CPUCLK_MIN 40000000 #define CFG_8xx_CPUCLK_MAX 133000000 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe060000" /* Autoboot command */ diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index c203aea9245..5d48d2bbb68 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -96,23 +96,26 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH) /* - * #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | \ - * CFG_CMD_KGDB | CFG_CMD_I2C | CFG_CMD_EEPROM | \ - * CFG_CMD_ENV | CFG_CMD_FLASH) + * BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* CFG_CMD_ENV est definie */ -/* ((CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_KGDB) & ~(CFG_CMD_ENV)) + +/* + * Command line configuration. */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -121,7 +124,7 @@ */ #undef CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -325,7 +328,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -365,7 +368,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h index b176c6f37e9..66e1203b7dd 100644 --- a/include/configs/ESTEEM192E.h +++ b/include/configs/ESTEEM192E.h @@ -70,10 +70,21 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "BOOT: " /* Monitor Command Prompt */ diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h index d55eb7d192e..ed439b1922b 100644 --- a/include/configs/ETX094.h +++ b/include/configs/ETX094.h @@ -82,17 +82,29 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -179,7 +191,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h index 78e57168854..1c44a0c6d73 100644 --- a/include/configs/EVB64260.h +++ b/include/configs/EVB64260.h @@ -103,21 +103,30 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ASKENV) +#define CONFIG_CMD_ASKENV -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -391,7 +400,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index d85be424a2a..a3f38bb3a32 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -82,10 +82,21 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -94,7 +105,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -206,7 +217,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index 1b562d60635..f810af2ceca 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -46,7 +46,6 @@ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -/*Now included by CFG_CMD_PCMCIA */ /*#define CONFIG_PCMCIA 1 / * To enable PCMCIA support */ /* Video related */ @@ -105,17 +104,39 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT ":>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -185,12 +206,13 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index 2a986f07680..a09c0e0393f 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -61,15 +61,28 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + /* * Miscellaneous configurable options */ #undef CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT ":>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -143,12 +156,13 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index 8babee140f9..431844c7f3d 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -62,21 +62,39 @@ /*#define CONFIG_WATCHDOG*/ /* watchdog enabled */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ -#define CONFIG_COMMANDS (CFG_CMD_BDI | CFG_CMD_IMI | CFG_CMD_CACHE | \ - CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_LOADS | \ - CFG_CMD_ENV | CFG_CMD_REGINFO | CFG_CMD_IMMAP | CFG_CMD_NET) +#define CONFIG_CMD_BDI +#define CONFIG_CMD_IMI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_ENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "EEG> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -152,7 +170,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 0dd21bc618c..3b0ddb4ec60 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -39,45 +39,90 @@ #undef CONFIG_8xx_CONS_SMC1 #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 19200 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif -#define CONFIG_BOOTCOMMAND "bootm 40020000" /* autoboot command */ +#define CONFIG_BAUDRATE 115200 -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ -#define CONFIG_BOOTARGS "root=/dev/nfs rw " \ - "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \ - "nfsaddrs=10.0.0.99:10.0.0.2" +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/fps850L/uImage\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~( \ - CFG_CMD_CONSOLE | \ - CFG_CMD_BDI | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_CACHE ) ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -160,7 +205,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index 423d74ea07a..6fec07540cf 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -40,44 +40,89 @@ #define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */ #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 115200 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else + +#define CONFIG_BOOTCOUNT_LIMIT + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif -#define CONFIG_BOOTCOMMAND "bootm 40040000" /* autoboot command */ #define CONFIG_BOARD_TYPES 1 /* support board types */ -#define CONFIG_BOOTARGS "root=/dev/nfs rw " \ - "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \ - "nfsaddrs=10.0.0.99:10.0.0.2" +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/fps850L/uImage\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -160,7 +205,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/G2000.h b/include/configs/G2000.h index db42fd06fe5..9c713c6c26f 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -88,20 +88,32 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -120,7 +132,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -324,7 +336,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index 6613f90a770..bfbf3a839cf 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -132,9 +132,12 @@ /* * BOOTP options */ -#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE \ - ) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + /* * The GEN860T network interface uses the on-chip 10/100 FEC with @@ -222,35 +225,30 @@ CFG_POST_UART | \ CFG_POST_SPR ) -#ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 -#endif /* - * List of available monitor commands. Use the system default list - * plus add some of the "non-standard" commands back in. - * See ./cmd_confdefs.h - */ -#define BASE_CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_FPGA | \ - CFG_CMD_MII | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_POST_DIAG ) + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_MII +#define CONFIG_CMD_BEDBUG #if !defined(CONFIG_SC) -#define CONFIG_COMMANDS ( BASE_CONFIG_COMMANDS | CFG_CMD_DOC ) -#else -#define CONFIG_COMMANDS BASE_CONFIG_COMMANDS + #define CONFIG_CMD_DOC +#endif + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG #endif /* @@ -279,11 +277,6 @@ #define CFG_FPGA_PROG_FEEDBACK -/************************************************************************ - * This must be included AFTER the definition of any CONFIG_COMMANDS - */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY /* @@ -306,7 +299,7 @@ /* * Set buffer size for console I/O */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 #else #define CFG_CBSIZE 256 @@ -471,7 +464,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of above value */ #endif diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h index 8c01d97fa33..785355a8e66 100644 --- a/include/configs/GENIETV.h +++ b/include/configs/GENIETV.h @@ -105,15 +105,28 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT ":>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -193,7 +206,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/GTH.h b/include/configs/GTH.h index 03b96594979..79f5714e6f0 100644 --- a/include/configs/GTH.h +++ b/include/configs/GTH.h @@ -97,18 +97,32 @@ #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_PROMPT "=>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -190,7 +204,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/HH405.h b/include/configs/HH405.h index dc40ebc861d..8967b3fc601 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -98,26 +98,40 @@ #define CONFIG_VIDEO_BMP_GZIP /* gzip compressed bmp images */ #define CFG_VIDEO_LOGO_MAX_SIZE (2 << 20) /* for decompressed img */ -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 #endif /* CONFIG_VIDEO */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - ADD_BMP_CMD | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + +#ifdef CONFIG_VIDEO +#define CONFIG_CMD_BMP +#endif #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -127,11 +141,6 @@ #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ #undef CONFIG_AUTO_UPDATE_SHOW /* use board show routine */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CFG_NAND_LEGACY - #undef CONFIG_BZIP2 /* include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -148,7 +157,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -198,36 +207,18 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff @@ -377,7 +368,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 68647407733..26dd954c18a 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -52,16 +52,27 @@ #define CONFIG_BAUDRATE 9600 #define CONFIG_DRAM_SPEED 100 /* MHz */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_PCI | \ - CFG_CMD_PING ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING /* * Miscellaneous configurable options @@ -363,7 +374,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/HMI10.h b/include/configs/HMI10.h index 7cce876924e..02ae5d005df 100644 --- a/include/configs/HMI10.h +++ b/include/configs/HMI10.h @@ -117,7 +117,15 @@ #define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -125,31 +133,25 @@ #define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ #define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + #ifdef CONFIG_SPLASH_SCREEN -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#else -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + #define CONFIG_CMD_BMP #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -164,7 +166,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -247,7 +249,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index f84e356216b..1ff71081302 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -60,18 +60,30 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -88,7 +100,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -135,38 +147,18 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff @@ -271,7 +263,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h index 35d84aedf8a..bd0894c29ab 100644 --- a/include/configs/IAD210.h +++ b/include/configs/IAD210.h @@ -84,7 +84,15 @@ /* #define CONFIG_STATUS_LED 1*/ /* Status LED enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + # undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ # define CONFIG_FEC_ENET 1 /* use FEC ethernet */ @@ -123,20 +131,23 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -217,7 +228,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index cd17935893f..da54cef534f 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -81,7 +81,15 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ #define CONFIG_FEC_ENET 1 /* use FEC ethernet */ @@ -123,25 +131,28 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -223,12 +234,13 @@ #define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment sector */ #define CFG_ENV_SIZE 0x4000 /* Used Size of Environment Sector */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 29eb874dbf0..85d2bb3f513 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -128,9 +128,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. - * + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -159,24 +157,34 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_NAND | \ - CFG_CMD_I2C | \ - CFG_CMD_SNTP ) +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -234,7 +242,7 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #define CFG_NAND_LEGACY #define CFG_NAND0_BASE 0xE1000000 @@ -295,7 +303,7 @@ #define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x0)) = (__u8)d; } while(0) #define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)(adr + 0x0))) -#endif /* CFG_CMD_NAND */ +#endif /* CONFIG_CMD_NAND */ /*----------------------------------------------------------------------- * Hard Reset Configuration Words @@ -355,7 +363,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -474,7 +482,7 @@ #define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE) |\ ORxG_SCY_6_CLK ) -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) /* Bank 1 - NAND Flash */ #define CFG_NAND_BASE CFG_NAND0_BASE diff --git a/include/configs/IP860.h b/include/configs/IP860.h index 0e20e567634..bd961d8426a 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -88,28 +88,32 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT - -/*----------------------------------------------------------------------*/ +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/*----------------------------------------------------------------------*/ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -202,7 +206,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index c1565fc037c..6fee4558dee 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -67,8 +67,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -95,7 +94,14 @@ #define CONFIG_8260_CLKIN 66666666 /* in Hz */ #define CONFIG_BAUDRATE 19200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE /* * select i2c support configuration @@ -124,17 +130,18 @@ #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ #endif /* CONFIG_SOFT_I2C */ -#define CONFIG_COMMANDS CONFIG_CMD_DFL -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/ram rw" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -149,7 +156,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -257,7 +264,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 706bdb94f57..965b515f0e6 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -58,8 +58,7 @@ * for FCC). * * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must - * be defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */ @@ -106,17 +105,28 @@ #define CONFIG_8260_CLKIN 65536000 /* in Hz */ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_REGINFO \ - ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe010000" /* autoboot command */ diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index a0cb1dd484b..1142f2afac1 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -72,24 +72,33 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK \ - ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -182,7 +191,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 46b4d535462..bd19dad1ff4 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -72,24 +72,32 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_IDE) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK \ - ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -179,7 +187,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 598811240a7..4c16d22959c 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -37,11 +37,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -69,7 +64,6 @@ #define CONFIG_PCI_IO_BUS 0x50000000 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 -#define ADD_PCI_CMD CFG_CMD_PCI #endif #define CFG_XLB_PIPELINING 1 @@ -80,11 +74,8 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#else /* MPC5100 */ - +#else #define CONFIG_MII 1 -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -93,31 +84,44 @@ #define CONFIG_ISO_PARTITION /* USB */ -#if 1 -#define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 -#endif +#define CFG_OHCI_BE_CONTROLLER +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CFG_USB_OHCI_SLOT_NAME "mpc5200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - ADD_PCI_CMD | \ - ADD_USB_CMD ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -167,19 +171,16 @@ * IPB Bus clocking configuration. */ #if defined(CONFIG_LITE5200B) -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #else -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #endif #endif /* CONFIG_MPC5200 */ /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) @@ -312,7 +313,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -328,6 +329,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index ccd1f19903b..ea3b0b4a325 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -49,6 +49,7 @@ /* Map the SystemACE chip (CS#1) here. (Must be a multiple of 1Meg) */ #define CONFIG_SYSTEMACE 1 #define CFG_SYSTEMACE_BASE 0xf0000000 +#define CFG_SYSTEMACE_WIDTH 8 #define CONFIG_DOS_PARTITION 1 /* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */ @@ -134,20 +135,32 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 1 /* PHY address */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_FLASH | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PCI | \ - CFG_CMD_PING ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING + /* watchdog disabled */ #undef CONFIG_WATCHDOG @@ -166,7 +179,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -271,7 +284,7 @@ */ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405GPr CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -297,7 +310,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 2ad6f06985a..3644e43885e 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -38,6 +38,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ @@ -177,23 +178,34 @@ #define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ -/*----------------------------------------------------------------------- - * Console/Commands/Parser - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_PING | \ - CFG_CMD_DIAG | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_ELF | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_PING +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT + /* Include NetConsole support */ #define CONFIG_NETCONSOLE @@ -202,10 +214,6 @@ #define CONFIG_AUTO_COMPLETE 1 #define CFG_ALT_MEMTEST 1 /* use real memory test */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "KaRefDes=> " /* Monitor Command Prompt */ @@ -216,7 +224,7 @@ /*----------------------------------------------------------------------- * Console Buffer *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -262,7 +270,6 @@ #define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE) /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/ #define CFG_PCI_TARGET_INIT /* let board init pci target*/ #define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ @@ -279,7 +286,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */ #endif @@ -291,7 +298,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ #define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ #endif diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 9b950fc5d16..f6c31ea8497 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -89,7 +89,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -156,32 +164,31 @@ #define CONFIG_POST (CFG_POST_CPU | \ CFG_POST_RTC | \ CFG_POST_I2C) - -#ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 -#endif #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -269,7 +276,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index cd38b0f2c2f..e558aa481b3 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -99,7 +99,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -167,34 +175,33 @@ #define CONFIG_POST (CFG_POST_CPU | \ CFG_POST_RTC | \ CFG_POST_I2C) - -#ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 -#endif #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -281,7 +288,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index e44f1cc627a..46edd08a91f 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -74,64 +74,68 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) - -#define CONFIG_CMD_MINIMAL 0 -#define CONFIG_CMD_TINY (CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB) -#define CONFIG_CMD_NORMAL (CONFIG_CMD_DFL & ~CFG_CMD_BOOTD & ~CFG_CMD_REISER) -#define CONFIG_CMD_GDB (CONFIG_CMD_NORMAL | CFG_CMD_KGDB) -#define CONFIG_CMD_FULL (CFG_CMD_ALL & ~CFG_CMD_BEDBUG \ - & ~CFG_CMD_BMP \ - & ~CFG_CMD_BSP \ - & ~CFG_CMD_DISPLAY \ - & ~CFG_CMD_DOC \ - & ~CFG_CMD_DTT \ - & ~CFG_CMD_EEPROM \ - & ~CFG_CMD_ELF \ - & ~CFG_CMD_EXT2 \ - & ~CFG_CMD_FDC \ - & ~CFG_CMD_FDOS \ - & ~CFG_CMD_HWFLOW \ - & ~CFG_CMD_I2C \ - & ~CFG_CMD_IDE \ - & ~CFG_CMD_IRQ \ - & ~CFG_CMD_JFFS2 \ - & ~CFG_CMD_KGDB \ - & ~CFG_CMD_MII \ - & ~CFG_CMD_MMC \ - & ~CFG_CMD_NAND \ - & ~CFG_CMD_PCI \ - & ~CFG_CMD_PCMCIA \ - & ~CFG_CMD_REISER \ - & ~CFG_CMD_SCSI \ - & ~CFG_CMD_SPI \ - & ~CFG_CMD_UNIVERSE\ - & ~CFG_CMD_USB \ - & ~CFG_CMD_VFD \ - & ~CFG_CMD_XIMG ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -#if CONFIG_LANTEC >= 2 -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG + +#if !(CONFIG_LANTEC >= 2) + #undef CONFIG_CMD_DATE + #undef CONFIG_CMD_NET #endif + #if CONFIG_LANTEC >= 2 -# define CONFIG_COMMANDS CONFIG_CMD_FULL -#else -# define CONFIG_COMMANDS (CONFIG_CMD_FULL & ~CFG_CMD_DATE & ~CFG_CMD_NET) +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -203,7 +207,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h new file mode 100644 index 00000000000..7f544c839fd --- /dev/null +++ b/include/configs/M5235EVB.h @@ -0,0 +1,261 @@ +/* + * Configuation settings for the Freescale MCF5329 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5235EVB_H +#define _M5235EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF523x /* define processor family */ +#define CONFIG_M5235 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTFILE "u-boot.bin" +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_KGDB) +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE+0x20000) + +#define CFG_HZ 1000 +#define CFG_CLK 75000000 +#define CFG_CPU_CLK CFG_CLK * 2 + +#define CFG_MBAR 0x40000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x21 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE - 0x10) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +#ifdef NORFLASH_PS32BIT +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#else +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#endif +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif + +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 +#ifdef NORFLASH_PS32BIT +# define CFG_ENV_OFFSET (0x8000) +# define CFG_ENV_SIZE 0x4000 +# define CFG_ENV_SECT_SIZE 0x4000 +#else +# define CFG_ENV_OFFSET (0x4000) +# define CFG_ENV_SIZE 0x2000 +# define CFG_ENV_SECT_SIZE 0x2000 +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - Available + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + * CS6 - Available + * CS7 - Available + */ +#ifdef NORFLASH_PS32BIT +# define CFG_CS0_BASE 0xFFC0 +# define CFG_CS0_MASK 0x003f0001 +# define CFG_CS0_CTRL 0x1D00 +#else +# define CFG_CS0_BASE 0xFFE0 +# define CFG_CS0_MASK 0x001f0001 +# define CFG_CS0_CTRL 0x1D80 +#endif + +#endif /* _M5329EVB_H */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h new file mode 100644 index 00000000000..de7ea42930f --- /dev/null +++ b/include/configs/M5249EVB.h @@ -0,0 +1,194 @@ +/* + * Configuation settings for the esd TASREG board. + * + * (C) Copyright 2004 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5249EVB_H +#define _M5249EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5249 /* define processor type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ + +/* + * BOOTP options + */ +#undef CONFIG_BOOTP_BOOTFILESIZE +#undef CONFIG_BOOTP_BOOTPATH +#undef CONFIG_BOOTP_GATEWAY +#undef CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_NET + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup */ +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ + +#define CFG_LOAD_ADDR 0x200000 /* default load address */ + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 + +/* + * Clock configuration: enable only one of the following options + */ + +#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_FAST_CLK 1 /* MCF5249 can run at 140MHz */ +#define CFG_CLK 132025600 /* MCF5249 can run at 140MHz */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_MBAR2 0x80000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x4000 /* Address of Environment Sector*/ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x2000 /* see README - env sector total size */ + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_FLASH_BASE (CFG_CSAR0 << 16) + +#if 0 /* test-only */ +#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ +#endif + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) + +#define CFG_MONITOR_LEN 0x20000 +#define CFG_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */ +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +/* CS0 - AMD Flash, address 0xffc00000 */ +#define CFG_CSAR0 0xffe0 +#define CFG_CSCR0 0x1980 /* WS=0110, AA=1, PS=10 */ +/** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ +#define CFG_CSMR0 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ + +/* CS1 - FPGA, address 0xe0000000 */ +#define CFG_CSAR1 0xe000 +#define CFG_CSCR1 0x0d80 /* WS=0011, AA=1, PS=10 */ +#define CFG_CSMR1 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ +#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_GPIO1_LED 0x00400000 /* user led */ + +#endif /* M5249 */ diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h new file mode 100644 index 00000000000..48170e7a35a --- /dev/null +++ b/include/configs/M5253EVBE.h @@ -0,0 +1,212 @@ +/* + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Hayden Fraser (Hayden.Fraser@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _M5253EVBE_H +#define _M5253EVBE_H + +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5253 /* define processor type */ +#define CONFIG_M5253EVBE /* define board type */ + +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG /* disable watchdog */ + +#define CONFIG_BOOTDELAY 5 + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#else +#define CFG_ENV_ADDR 0xffe04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/* + * BOOTP options + */ +#undef CONFIG_BOOTP_BOOTFILESIZE +#undef CONFIG_BOOTP_BOOTPATH +#undef CONFIG_BOOTP_GATEWAY +#undef CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_NET +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC + +/* ATA */ +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_ATAPI +#undef CONFIG_LBA48 + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 2 + +#define CFG_ATA_BASE_ADDR (CFG_MBAR2 + 0x800) +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 4 /* Interval between registers */ +#define _IO_BASE 0 + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000 + +#undef CFG_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_FAST_CLK +#ifdef CFG_FAST_CLK +# define CFG_PLLCR 0x1243E054 +# define CFG_CLK 140000000 +#else +# define CFG_PLLCR 0x135a4140 +# define CFG_CLK 70000000 +#endif + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_MBAR2 0x80000000 /* Module Base Addrs 2 */ + +/* + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x40000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN (64*1024) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/* FLASH organization */ +#define CFG_FLASH_BASE 0xffe00000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x200000 +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +/* Cache Configuration */ +#define CFG_CACHELINE_SIZE 16 + +/* Port configuration */ +#define CFG_FECI2C 0xF0 + +#define CFG_CSAR0 0xFFE0 +#define CFG_CSMR0 0x001F0021 +#define CFG_CSCR0 0x1D80 + +#define CFG_CSAR1 0 +#define CFG_CSMR1 0 +#define CFG_CSCR1 0 + +#define CFG_CSAR2 0 +#define CFG_CSMR2 0 +#define CFG_CSCR2 0 + +#define CFG_CSAR3 0 +#define CFG_CSMR3 0 +#define CFG_CSCR3 0 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ +#define CFG_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_GPIO1_LED 0x00400000 /* user led */ + +#endif /* _M5253EVB_H */ diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index f0fc0134341..798ec0c7a4c 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -31,7 +31,6 @@ #ifndef _M5271EVB_H #define _M5271EVB_H -#define DEBUG #undef DEBUG /* @@ -41,46 +40,119 @@ #define CONFIG_M5271 /* define processor type */ #define CONFIG_M5271EVB /* define board type */ -#define CONFIG_IPADDR 192.168.30.1 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_ETHADDR 00:06:3b:01:41:55 +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ -#define CONFIG_BOOTDELAY 5 - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ #ifndef CONFIG_MONITOR_IS_IN_RAM #define CFG_ENV_OFFSET 0x4000 -#define CFG_ENV_SECT_SIZE 0x2000 -#define CFG_ENV_IS_IN_FLASH 1 #else #define CFG_ENV_ADDR 0xffe04000 +#endif #define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 -#endif +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB)) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000300 +#define CFG_IMMR CFG_MBAR + +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTFILE "u-boot.bin" +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_RETRY_COUNT 5 +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe2ffff;" \ + "era ffe00000 ffe2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" #define CFG_PROMPT "=> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x00100000 @@ -98,16 +170,11 @@ #define CFG_MBAR 0x40000000 /* Register Base Addrs */ -/* Enable FEC ethernet */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 -#define CFG_ENET_BD_BASE 0x480000 - /* * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -118,7 +185,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #ifdef CONFIG_MONITOR_IS_IN_RAM @@ -136,11 +203,11 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 1000 #define CFG_FLASH_CFI 1 @@ -153,4 +220,4 @@ /* Port configuration */ #define CFG_FECI2C 0xF0 -#endif /* _M5271EVB_H */ +#endif /* _M5271EVB_H */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 5fd6a95c4d1..2b8734b4c6d 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -33,18 +33,20 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5272 /* define processor type */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5272 /* define processor type */ -#define FEC_ENET +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -#define CONFIG_WATCHDOG +#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ -#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -60,30 +62,90 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) | \ - CFG_CMD_MII) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_MISC +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ + +#define CONFIG_HOSTNAME M5272C3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" #define CFG_PROMPT "-> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x20000 - #define CFG_MEMTEST_START 0x400 #define CFG_MEMTEST_END 0x380000 - #define CFG_HZ 1000 #define CFG_CLK 66000000 @@ -92,20 +154,15 @@ * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ - #define CFG_MBAR 0x10000000 /* Register Base Addrs */ - #define CFG_SCR 0x0003; #define CFG_SPR 0xffff; -#define CFG_DISCOVER_PHY -#define CFG_ENET_BD_BASE 0x380000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ #define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -116,7 +173,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #ifdef CONFIG_MONITOR_IS_IN_RAM @@ -134,13 +191,13 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 1000 /*----------------------------------------------------------------------- @@ -153,25 +210,18 @@ */ #define CFG_BR0_PRELIM 0xFFE00201 #define CFG_OR0_PRELIM 0xFFE00014 - #define CFG_BR1_PRELIM 0 #define CFG_OR1_PRELIM 0 - #define CFG_BR2_PRELIM 0x30000001 #define CFG_OR2_PRELIM 0xFFF80000 - #define CFG_BR3_PRELIM 0 #define CFG_OR3_PRELIM 0 - #define CFG_BR4_PRELIM 0 #define CFG_OR4_PRELIM 0 - #define CFG_BR5_PRELIM 0 #define CFG_OR5_PRELIM 0 - #define CFG_BR6_PRELIM 0 #define CFG_OR6_PRELIM 0 - #define CFG_BR7_PRELIM 0x00000701 #define CFG_OR7_PRELIM 0xFFC0007C @@ -181,9 +231,8 @@ #define CFG_PACNT 0x00000000 #define CFG_PADDR 0x0000 #define CFG_PADAT 0x0000 -#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */ +#define CFG_PBCNT 0x55554155 /* Ethernet/UART configuration */ #define CFG_PBDDR 0x0000 #define CFG_PBDAT 0x0000 #define CFG_PDCNT 0x00000000 - -#endif /* _M5272C3_H */ +#endif /* _M5272C3_H */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index cbb3e3bb9f9..3c17c1ea146 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -33,15 +33,17 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5282 /* define processor type */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5282 /* define processor type */ -#define FEC_ENET +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -#define CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -50,24 +52,81 @@ #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* CONFIG_MCFFEC */ + +#define CONFIG_HOSTNAME M5272C3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" #define CFG_PROMPT "-> " -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x20000 @@ -77,6 +136,10 @@ #define CFG_HZ 1000000 #define CFG_CLK 64000000 +/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ + +#define CFG_MFD 0x02 /* PLL Multiplication Factor Devider */ +#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ /* * Low Level Configuration Settings @@ -85,15 +148,12 @@ */ #define CFG_MBAR 0x40000000 -#undef CFG_DISCOVER_PHY -#define CFG_ENET_BD_BASE 0x380000 - /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -103,49 +163,88 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 4 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #define CFG_INT_FLASH_BASE 0xf0000000 +#define CFG_INT_FLASH_ENABLE 0x21 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ -/* #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) */ -#define CFG_MONITOR_BASE 0x20000 +#if (TEXT_BASE != CFG_INT_FLASH_BASE) +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#else +#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ +#endif #define CFG_MONITOR_LEN 0x20000 #define CFG_MALLOC_LEN (256 << 10) #define CFG_BOOTPARAMS_LEN 64*1024 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_SECT 35 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_FLASH_ERASE_TOUT 10000000 +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 - /*----------------------------------------------------------------------- * Memory bank definitions */ - - +#define CFG_CS0_BASE CFG_FLASH_BASE +#define CFG_CS0_SIZE 2*1024*1024 +#define CFG_CS0_WIDTH 16 +#define CFG_CS0_RO 0 +#define CFG_CS0_WS 6 +/* +#define CFG_CS3_BASE 0xE0000000 +#define CFG_CS3_SIZE 1*1024*1024 +#define CFG_CS3_WIDTH 16 +#define CFG_CS3_RO 0 +#define CFG_CS3_WS 6 +*/ /*----------------------------------------------------------------------- * Port configuration */ +#define CFG_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_PADDR 0x0000000 +#define CFG_PADAT 0x0000000 + +#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_PBDDR 0x0000000 +#define CFG_PBDAT 0x0000000 + +#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 +#define CFG_PEHLPAR 0xC0 +#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CFG_DDRUA 0x05 +#define CFG_PJPAR 0xFF; -#endif /* _CONFIG_M5282EVB_H */ +#endif /* _CONFIG_M5282EVB_H */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h new file mode 100644 index 00000000000..d3b160505be --- /dev/null +++ b/include/configs/M5329EVB.h @@ -0,0 +1,267 @@ +/* + * Configuation settings for the Freescale MCF5329 FireEngine board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5329EVB_H +#define _M5329EVB_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF532x /* define processor family */ +#define CONFIG_M5329 /* define processor type */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ + +/* Command line configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#ifdef NANDFLASH_SIZE +# define CONFIG_CMD_NAND +#endif + +#define CFG_UNIFY_CACHE + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_MCFRTC +#undef RTC_DEBUG + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x58000 +#define CFG_IMMR CFG_MBAR + +#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_UDP_CHECKSUM + +#ifdef CONFIG_MCFFEC +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_HOSTNAME M5329EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#ifdef CONFIG_CMD_KGDB +# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x40010000 + +#define CFG_HZ 1000 +#define CFG_CLK 80000000 +#define CFG_CPU_CLK CFG_CLK * 3 + +#define CFG_MBAR 0xFC000000 + +#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x53722730 +#define CFG_SDRAM_CFG2 0x56670000 +#define CFG_SDRAM_CTRL 0xE1092000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x018D0000 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#endif + +#ifdef NANDFLASH_SIZE +# define CFG_MAX_NAND_DEVICE 1 +# define CFG_NAND_BASE (CFG_CS2_BASE << 16) +# define CFG_NAND_SIZE 1 +# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +# define NAND_MAX_CHIPS 1 +# define NAND_ALLOW_ERASE_ALL 1 +# define CONFIG_JFFS2_NAND 1 +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) +# define CONFIG_JFFS2_PART_OFFSET 0x00000000 +#endif + +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Chipselect bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - NAND Flash 16, 32, or 64MB + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x007f0001 +#define CFG_CS0_CTRL 0x00001fa0 + +#define CFG_CS1_BASE 0x1000 +#define CFG_CS1_MASK 0x001f0001 +#define CFG_CS1_CTRL 0x002A3780 + +#ifdef NANDFLASH_SIZE +#define CFG_CS2_BASE 0x2000 +#define CFG_CS2_MASK ((NANDFLASH_SIZE << 20) | 1) +#define CFG_CS2_CTRL 0x00001f60 +#endif + +#endif /* _M5329EVB_H */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h new file mode 100644 index 00000000000..6f4859c2380 --- /dev/null +++ b/include/configs/M54455EVB.h @@ -0,0 +1,391 @@ +/* + * Configuation settings for the Freescale MCF54455 EVB board. + * + * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _JAMICA54455_H +#define _JAMICA54455_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF5445x /* define processor family */ +#define CONFIG_M54455 /* define processor type */ +#define CONFIG_M54455EVB /* M54455EVB board */ + +#undef DEBUG + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +/* Network configuration */ +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CONFIG_CF_DOMII +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC1_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +# define CONFIG_HAS_ETH1 + +# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" +# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +# define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 +# define CONFIG_ETHPRIME "FEC0" +# define CONFIG_IPADDR 192.162.1.2 +# define CONFIG_NETMASK 255.255.255.0 +# define CONFIG_SERVERIP 192.162.1.1 +# define CONFIG_GATEWAYIP 192.162.1.1 +# define CONFIG_OVERWRITE_ETHADDR_ONCE + +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif + +#define CONFIG_HOSTNAME M54455EVB +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off 0 2ffff;" \ + "era 0 2ffff;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" + +/* ATA configuration */ +#define CONFIG_ISO_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_IDE_RESET 1 +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_ATAPI +#undef CONFIG_LBA48 + +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 2 + +#define CFG_ATA_BASE_ADDR 0x90000000 +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 4 /* Interval between registers */ +#define _IO_BASE 0 + +/* Realtime clock */ +#define CONFIG_MCFRTC +#undef RTC_DEBUG +#define CFG_RTC_OSCILLATOR (32 * CFG_HZ) + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2c */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 80000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x58000 +#define CFG_IMMR CFG_MBAR + +/* PCI */ +#define CONFIG_PCI 1 + +#define CFG_PCI_MEM_BUS 0xA0000000 +#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS +#define CFG_PCI_MEM_SIZE 0x10000000 + +#define CFG_PCI_IO_BUS 0xB1000000 +#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS +#define CFG_PCI_IO_SIZE 0x01000000 + +#define CFG_PCI_CFG_BUS 0xB0000000 +#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS +#define CFG_PCI_CFG_SIZE 0x01000000 + +/* FPGA - Spartan 2 */ +/* experiment +#define CONFIG_FPGA CFG_SPARTAN3 +#define CONFIG_FPGA_COUNT 1 +#define CFG_FPGA_PROG_FEEDBACK +#define CFG_FPGA_CHECK_CTRLC +*/ + +/* Input, PCI, Flexbus, and VCO */ +#define CONFIG_EXTRA_CLOCK + +#define CONFIG_PRAM 512 /* 512 KB */ + +#define CFG_PROMPT "-> " +#define CFG_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000) + +#define CFG_HZ 1000 + +#define CFG_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x80000000 +#define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CFG_INIT_RAM_CTRL 0x221 +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x40000000 +#define CFG_SDRAM_BASE1 0x48000000 +#define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */ +#define CFG_SDRAM_CFG1 0x65311610 +#define CFG_SDRAM_CFG2 0x59670000 +#define CFG_SDRAM_CTRL 0xEA0B2000 +#define CFG_SDRAM_EMOD 0x40010000 +#define CFG_SDRAM_MODE 0x00010033 + +#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 +#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) + +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#define CFG_BOOTPARAMS_LEN 64*1024 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OVERWRITE 1 +#undef CFG_ENV_IS_EMBEDDED + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#ifdef CFG_ATMEL_BOOT +# define CFG_FLASH_BASE 0 +# define CFG_FLASH0_BASE CFG_CS0_BASE +# define CFG_FLASH1_BASE CFG_CS1_BASE +#else +# define CFG_FLASH_BASE CFG_FLASH0_BASE +# define CFG_FLASH0_BASE CFG_CS1_BASE +# define CFG_FLASH1_BASE CFG_CS0_BASE +#endif + +/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system +/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system + keep reset. */ +#undef CFG_FLASH_CFI +#ifdef CFG_FLASH_CFI + +# define CFG_FLASH_CFI_DRIVER 1 +# define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT +# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM +# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } + +#else + +# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ + +# define CFG_ATMEL_REGION 4 +# define CFG_ATMEL_TOTALSECT 11 +# define CFG_ATMEL_SECT {1, 2, 1, 7} +# define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} +# define CFG_INTEL_SECT 137 + +/* max number of sectors on one chip */ +# define CFG_MAX_FLASH_SECT (CFG_ATMEL_TOTALSECT + CFG_INTEL_SECT) +# define CFG_FLASH_ERASE_TOUT 2000 /* Atmel needs longer timeout */ +# define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +# define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +# define CFG_FLASH_UNLOCK_TOUT 100 /* Timeout for Flash Clear Lock Bits (in ms) */ +# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CFG_FLASH_CHECKSUM + +#endif + +/* + * This is setting for JFFS2 support in u-boot. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. + */ +#ifdef CFG_ATMEL_BOOT +# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_PART_SIZE 0x01000000 +# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE +#else +# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) +# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000) +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ +/* + * CS0 - NOR Flash 1, 2, 4, or 8MB + * CS1 - CompactFlash and registers + * CS2 - CPLD + * CS3 - FPGA + * CS4 - Available + * CS5 - Available + */ + +#ifdef CFG_ATMEL_BOOT + /* Atmel Flash */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x00070001 +#define CFG_CS0_CTRL 0x00001140 +/* Intel Flash */ +#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_MASK 0x01FF0001 +#define CFG_CS1_CTRL 0x003F3D60 + +#define CFG_ATMEL_BASE CFG_CS0_BASE +#else +/* Intel Flash */ +#define CFG_CS0_BASE 0 +#define CFG_CS0_MASK 0x01FF0001 +#define CFG_CS0_CTRL 0x003F3D60 + /* Atmel Flash */ +#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_MASK 0x00070001 +#define CFG_CS1_CTRL 0x00001140 + +#define CFG_ATMEL_BASE CFG_CS1_BASE +#endif + +/* CPLD */ +#define CFG_CS2_BASE 0x08000000 +#define CFG_CS2_MASK 0x00070001 +#define CFG_CS2_CTRL 0x003f1140 + +/* FPGA */ +#define CFG_CS3_BASE 0x09000000 +#define CFG_CS3_MASK 0x00070001 +#define CFG_CS3_CTRL 0x00000020 + +#endif /* _JAMICA54455_H */ diff --git a/include/configs/MBX.h b/include/configs/MBX.h index d6e3fb8de9b..d9f2addb565 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -71,13 +71,27 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_COMMANDS ( CFG_CMD_NET | CONFIG_CMD_DFL | CFG_CMD_SDRAM | \ - CFG_CMD_PCMCIA | CFG_CMD_IDE ) -#define CONFIG_DOS_PARTITION +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_IDE + + +#define CONFIG_DOS_PARTITION /* * Miscellaneous configurable options @@ -88,7 +102,7 @@ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -187,7 +201,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index 0ca0970075c..69d195dc028 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -151,7 +151,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 465a4ecb8b9..8d7ec5926bc 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -104,6 +104,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_METROBOX 1 /* Board is Metrobox */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ @@ -241,26 +242,33 @@ #define CFG_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ -/*----------------------------------------------------------------------- - * Console/Commands/Parser - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_PING | \ - CFG_CMD_DIAG | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_ELF | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT) - -/* tbs 09-March-2005 Removed to be able to use 2nd serial */ -/* CFG_CMD_KGDB | \ */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_PING +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT /* Include NetConsole support */ @@ -271,10 +279,6 @@ #define CONFIG_AUTO_COMPLETE 1 #define CFG_ALT_MEMTEST 1 /* use real memory test */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "MetroBox=> " /* Monitor Command Prompt */ @@ -285,7 +289,7 @@ /*----------------------------------------------------------------------- * Console Buffer *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -331,7 +335,6 @@ #define CFG_PCI_TARGBASE (CFG_PCI_MEMBASE) /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init*/ #define CFG_PCI_TARGET_INIT /* let board init pci target*/ #define CFG_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ @@ -348,7 +351,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above */ #endif @@ -360,7 +363,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal PowerOn: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ #define CONFIG_KGDB_SER_INDEX 2 /* kgdb serial port */ #endif diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index 53684ca6b57..dde77427113 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -115,25 +115,36 @@ #define CONFIG_BR0_WORKAROUND 1 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_REGINFO ) -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_REGINFO + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -225,7 +236,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 7e57a0fae14..5b526a0993f 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -50,41 +50,43 @@ ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ -/*********************************************************** - * Command definitions - ***********************************************************/ -#define MIP405_COMMON_CMDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SAVES | \ - CFG_CMD_BSP ) -#if defined(CONFIG_MIP405T) -#define CONFIG_COMMANDS \ - MIP405_COMMON_CMDS -#else -#define CONFIG_COMMANDS \ - (MIP405_COMMON_CMDS | \ - CFG_CMD_USB | \ - CFG_CMD_DOC ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_BSP + +#if !defined(CONFIG_MIP405T) + #define CONFIG_CMD_USB + #define CONFIG_CMD_DOC #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CFG_NAND_LEGACY @@ -165,7 +167,7 @@ **********************************************************/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -260,7 +262,7 @@ */ #define CFG_DCACHE_SIZE 0x4000 /* For AMCC 405GPr CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -426,7 +428,7 @@ /************************************************************ * Debug support ************************************************************/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ML2.h b/include/configs/ML2.h index d8805ea5a70..f488275f239 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -76,20 +76,31 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & \ - ~( CFG_CMD_NET | \ - CFG_CMD_RTC | \ - CFG_CMD_PCI | \ - CFG_CMD_I2C \ - ) ) | \ - CFG_CMD_IRQ | \ - CFG_CMD_KGDB | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF | \ - CFG_CMD_JFFS2 ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_JFFS2 + +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_RTC +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_I2C + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -102,7 +113,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -195,7 +206,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -236,7 +247,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 6ad2feb28e7..9370c24c500 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -58,14 +58,31 @@ #endif #define CONFIG_BOOTARGS "console=ttyS0 root=/dev/nfs rw nfsroot=209.128.93.133:/boot nfsaddrs=209.128.93.133:209.128.93.138" #define CONFIG_BOOTDELAY 3 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL|CFG_CMD_ASKENV|CFG_CMD_DATE) + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE + + #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_ETH_ADDR "00:10:18:10:00:06" #define CONFIG_DOS_PARTITION 1 /* MSDOS bootable partitiion support */ -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> + #include "../board/mousse/mousse.h" /* diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 6195bca85ba..713518d0da2 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -101,8 +101,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -198,59 +197,69 @@ #define CONFIG_BAUDRATE 115200 -#define CFG_EXCLUDE CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_KGDB | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_SNTP | \ - CFG_CMD_UNIVERSE | \ - CFG_CMD_USB | \ - CFG_CMD_VFD | \ - CFG_CMD_XIMG +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DATE +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG #if CONFIG_ADSTYPE == CFG_8272ADS -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_SDRAM | \ - CFG_CMD_I2C | \ - CFG_EXCLUDE ) ) + #undef CONFIG_CMD_SDRAM + #undef CONFIG_CMD_I2C + #elif CONFIG_ADSTYPE >= CFG_PQ2FADS -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_SDRAM | \ - CFG_CMD_I2C | \ - CFG_CMD_PCI | \ - CFG_EXCLUDE ) ) + #undef CONFIG_CMD_SDRAM + #undef CONFIG_CMD_I2C + #undef CONFIG_CMD_PCI + #else -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CMD_CFG_PCI | \ - CFG_EXCLUDE ) ) + #undef CONFIG_CMD_PCI + #endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fff80000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/mtdblock2" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -268,7 +277,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -384,7 +393,7 @@ #endif /* CFG_RAMBOOT */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -397,9 +406,9 @@ #define CFG_BCR 0x100C0000 #define CFG_SIUMCR 0x0A200000 #define CFG_SCCR SCCR_DFBRG01 -#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801) #define CFG_OR0_PRELIM 0xFF800876 -#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801 +#define CFG_BR1_PRELIM (CFG_BCSR | 0x00001801) #define CFG_OR1_PRELIM 0xFFFF8010 /*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 4953b7053be..14b041e3aec 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -83,8 +83,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -141,40 +140,43 @@ */ #define SPD_EEPROM_ADDRESS 0x50 - #define CONFIG_8260_CLKIN 66000000 /* in Hz */ #define CONFIG_BAUDRATE 115200 - -#define CONFIG_COMMANDS ( CFG_CMD_ALL & ~( \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_SNTP | \ - CFG_CMD_VFD | \ - CFG_CMD_UNIVERSE | \ - CFG_CMD_USB | \ - CFG_CMD_XIMG ) ) +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DATE +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_XIMG /* Define a command string that is automatically executed when no character * is read on the console interface withing "Boot Delay" after reset. @@ -202,21 +204,19 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_NFS */ -/* Add support for a few extra bootp options like: - * - File size - * - DNS +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -231,7 +231,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -283,7 +283,6 @@ #define SDRAM_SPD_ADDR 0x50 - /*----------------------------------------------------------------------- * BR2,BR3 - Base Register * Ref: Section 10.3.1 on page 10-14 @@ -381,7 +380,6 @@ #error "INVALID SDRAM CONFIGURATION" #endif - #define RS232EN_1 0x02000002 #define RS232EN_2 0x01000001 #define FETHIEN 0x08000008 @@ -393,7 +391,6 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - /* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2) */ /* 0x0EB2B645 */ #define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\ @@ -450,13 +447,11 @@ # define CFG_ENV_SIZE 0x200 #endif /* CFG_RAMBOOT */ - #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif - /*----------------------------------------------------------------------- * HIDx - Hardware Implementation-dependent Registers 2-11 *----------------------------------------------------------------------- diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h new file mode 100644 index 00000000000..6568fe13b85 --- /dev/null +++ b/include/configs/MPC8313ERDB.h @@ -0,0 +1,569 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * mpc8313epb board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83XX 1 +#define CONFIG_MPC831X 1 +#define CONFIG_MPC8313 1 +#define CONFIG_MPC8313ERDB 1 + +#define CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI + +#ifdef CFG_66MHZ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ +#elif defined(CFG_33MHZ) +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#else +#error Unknown oscillator frequency. +#endif + +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +#define CFG_IMMR 0xE0000000 + +#define CFG_MEMTEST_START 0x00001000 +#define CFG_MEMTEST_END 0x07f00000 + +/* Early revs of this board will lock up hard when attempting + * to access the PMC registers, unless a JTAG debugger is + * connected, or some resistor modifications are made. + */ +#define CFG_8313ERDB_BROKEN_PMC 1 + +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +/* + * Manually set up DDR parameters, as this board does not + * seem to have the SPD connected to I2C. + */ +#define CFG_DDR_SIZE 128 /* MB */ +#define CFG_DDR_CONFIG ( CSCONFIG_EN | CSCONFIG_AP \ + | 0x00040000 /* TODO */ \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) + /* 0x80840102 */ + +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ + | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ + | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) + /* 0x00220802 */ +#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ + | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ + | (13 << TIMING_CFG1_REFREC_SHIFT ) \ + | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) + /* 0x3935d322 */ +#define CFG_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | (31 << TIMING_CFG2_CPO_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ + | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ + | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ + | (10 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x0f9048ca */ /* P9-45,may need tuning */ +#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x03200064 */ +#if defined(CONFIG_DDR_2T_TIMING) +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_2T_EN \ + | SDRAM_CFG_DBW_32 ) +#else +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_32_BE ) + /* 0x43080000 */ +#endif +#define CFG_SDRAM_CFG2 0x00401000; +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) + /* 0x44400232 */ +#define CFG_DDR_MODE_2 0x8000C000; + +#define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + /*0x02000000*/ +#define CFG_DDRCDR_VALUE ( DDRCDR_EN \ + | DDRCDR_PZ_NOMZ \ + | DDRCDR_NZ_NOMZ \ + | DDRCDR_M_ODR ) + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ +#define CFG_FLASH_EMPTY_INFO /* display empty sectors */ +#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM ( 0xFF000000 /* 16 MByte */ \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_9 \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD ) + /* 0xFF006FF7 TODO SLOW 16 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16 MB window size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#endif + +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + */ +#define CFG_LCRR LCRR_EADC_1 | LCRR_CLKDIV_2 /* 0x00010002 */ +#define CFG_LBC_LBCR ( 0x00040000 /* TODO */ \ + | (0xFF << LBCR_BMT_SHIFT) \ + | 0xF ) /* 0x0004ff0f */ + +#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */ + +/* drivers/nand/nand.c */ +#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE + +#define CFG_BR1_PRELIM ( CFG_NAND_BASE \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V ) /* valid */ +#define CFG_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR ) + /* 0xFFFF8396 */ +#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ + +#define CFG_VSC7385_BASE 0xF0000000 + +#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ +#define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ +#define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ +#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */ +#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */ + +/* local bus read write buffer mapping */ +#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ +#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ +#define CFG_LBLAWBAR3_PRELIM 0xFA000000 +#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,8313@0" +#define OF_SOC "soc8313@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500" + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* TSEC */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) +#define CONFIG_NET_MULTI + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_GMII 1 /* MII PHY management */ +#define CONFIG_TSEC1 1 + +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0x1c +#define TSEC2_PHY_ADDR 4 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC1" + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1337 +#define CFG_I2C_RTC_ADDR 0x68 + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#else + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PCI + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif + +#define CONFIG_CMDLINE_EDITING 1 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#ifdef CFG_66MHZ + +/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */ +/* 0x62040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#elif defined(CFG_33MHZ) + +/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */ +/* 0x65040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_5X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#endif + +/* 0xa0606c00 */ +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* System IO Config */ +#define CFG_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ +#define CFG_SICRL SICRL_USBDR /* Enable Internal USB Phy */ + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI2 not supported on 8313 */ +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:E0:0C:00:95:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH0 +#define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8313erdb +#define CONFIG_ROOTPATH /nfs/root/path +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc8313erdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "ethprime=TSEC1\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h new file mode 100644 index 00000000000..376973b94da --- /dev/null +++ b/include/configs/MPC8323ERDB.h @@ -0,0 +1,583 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83XX 1 /* MPC83xx family */ +#define CONFIG_MPC832X 1 /* MPC832x CPU specific */ + +#define CONFIG_PCI 1 +#define CONFIG_83XX_GENERIC_PCI 1 + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN +#endif + +/* + * Hardware Reset Configuration Word + */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2_5X1 |\ + HRCWL_CE_PLL_VCO_DIV_2 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X3) + +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* + * System IO Config + */ +#define CFG_SICRL 0x00000000 + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +/* + * IMMR new address + */ +#define CFG_IMMR 0xE0000000 + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */ + +#undef CONFIG_SPD_EEPROM +#if defined(CONFIG_SPD_EEPROM) +/* Determine DDR configuration from I2C interface + */ +#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */ +#else +/* Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 64 /* MB */ +#define CFG_DDR_CS0_CONFIG 0x80840101 +#define CFG_DDR_TIMING_0 0x00220802 +#define CFG_DDR_TIMING_1 0x3935d322 +#define CFG_DDR_TIMING_2 0x0f9048ca +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_CLK_CNTL 0x02000000 +#define CFG_DDR_MODE 0x44400232 +#define CFG_DDR_MODE2 0x8000c000 +#define CFG_DDR_INTERVAL 0x03200064 +#define CFG_DDR_CS0_BNDS 0x00000003 +#define CFG_DDR_SDRAM_CFG 0x43080000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#endif + +/* + * Memory test + */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00030000 /* memtest region */ +#define CFG_MEMTEST_END 0x03f00000 + +/* + * The reserved memory + */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/* + * Local Bus Configuration & Clock Setup + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CFG_LBC_LBCR 0x00000000 + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */ + +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * SDRAM on the Local Bus + */ +#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */ + +/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +/* + * Windows to access PIB via local bus + */ +#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,8323@0" +#define OF_SOC "soc8323@e0000000" +#define OF_QE "qe@e0100000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 + +/* + * Config on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0xd0000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */ + +#ifdef CONFIG_PCI + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "Freescale GETH" + +#define CONFIG_UEC_ETH1 /* ETH3 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 2 /* UCC3 */ +#define CFG_UEC1_RX_CLK QE_CLK9 +#define CFG_UEC1_TX_CLK QE_CLK10 +#define CFG_UEC1_ETH_TYPE FAST_ETH +#define CFG_UEC1_PHY_ADDR 4 +#define CFG_UEC1_INTERFACE_MODE ENET_100_MII +#endif + +#define CONFIG_UEC_ETH2 /* ETH4 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK16 +#define CFG_UEC2_TX_CLK QE_CLK3 +#define CFG_UEC2_ETH_TYPE FAST_ETH +#define CFG_UEC2_PHY_ADDR 0 +#define CFG_UEC2_INTERFACE_MODE ENET_100_MII +#endif + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ASKENV + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Core HID Setup + */ +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Cache Config + */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif + +/* + * MMU Setup + */ + +/* DDR: cache cacheable */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT2U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT2L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U CFG_IBAT2U + +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT4L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT4U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT5L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT5U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +/* PCI MMIO space: cache-inhibit and guarded */ +#define CFG_IBAT6L (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#else +#define CFG_IBAT5L (0) +#define CFG_IBAT5U (0) +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#endif + +/* Nothing in BAT7 */ +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:04:9f:ef:03:01 +#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ +#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8323erdb +#define CONFIG_ROOTPATH /nfsroot +#define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc832x_rdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftp $loadaddr $uboot;" \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index cecb2258ffe..c9c6d88cf01 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -30,6 +30,8 @@ #define CONFIG_MPC83XX 1 /* MPC83xx family */ #define CONFIG_MPC832X 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -87,6 +89,7 @@ #define CFG_SICRL 0x00000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address @@ -315,12 +318,9 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8323@0" #define OF_SOC "soc8323@e0000000" #define OF_QE "qe@e0100000" @@ -423,41 +423,33 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#endif -#else +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ASKENV + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C ) + #define CONFIG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -468,7 +460,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -498,7 +490,7 @@ */ #define CFG_DCACHE_SIZE 16384 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ #endif @@ -575,7 +567,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 0460be9e569..92555bac422 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -339,12 +339,9 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) @@ -432,14 +429,16 @@ #endif #define CONFIG_GMII 1 /* MII PHY management */ -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" @@ -475,44 +474,35 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C \ - | CFG_CMD_DATE) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_DATE) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#endif -#else + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_DATE \ - ) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ - | CFG_CMD_DATE \ - ) + #define CONFIG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -523,7 +513,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -544,7 +534,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -695,7 +685,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -708,6 +698,7 @@ #if defined(CONFIG_TSEC_ENET) #define CONFIG_ETHADDR 00:04:9f:ef:23:33 #define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH0 #define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 #endif diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 37bbfb336d2..54cab528bde 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -154,6 +154,9 @@ #define CFG_MEMTEST_START 0x1000 /* memtest region */ #define CFG_MEMTEST_END 0x2000 +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) + #ifdef CONFIG_HARD_I2C #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #endif @@ -286,18 +289,16 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} +#define CONFIG_CONSOLE ttyS0 #define CONFIG_BAUDRATE 115200 #define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) #define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) @@ -369,24 +370,27 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_NET_MULTI #define CONFIG_MII -#define CONFIG_PHY_GIGE /* In case CFG_CMD_MII is specified */ +#define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ -#define CONFIG_MPC83XX_TSEC1 +#define CONFIG_TSEC1 -#ifdef CONFIG_MPC83XX_TSEC1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 +#define CONFIG_TSEC1_NAME "TSEC0" #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ #define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 #define CONFIG_HAS_ETH1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC2_NAME "TSEC1" #define CFG_TSEC2_OFFSET 0x25000 #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ #define TSEC2_PHY_ADDR 4 #define TSEC2_PHYIDX 0 +#define TSEC2_FLAGS TSEC_GIGABIT #endif #define CONFIG_ETHPRIME "Freescale TSEC" @@ -405,6 +409,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_NO_FLASH /* Flash is not usable now */ + #undef CFG_FLASH_CFI_DRIVER #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) #define CFG_ENV_SIZE 0x2000 @@ -413,40 +418,41 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ -/* CONFIG_COMMANDS */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM #ifdef CONFIG_COMPACT_FLASH -#define CONFIG_COMMANDS_CF (CFG_CMD_IDE | CFG_CMD_FAT) -#else -#define CONFIG_COMMANDS_CF 0 + #define CONFIG_CMD_IDE + #define CONFIG_CMD_FAT #endif #ifdef CONFIG_PCI -#define CONFIG_COMMANDS_PCI CFG_CMD_PCI -#else -#define CONFIG_COMMANDS_PCI 0 + #define CONFIG_CMD_PCI #endif #ifdef CONFIG_HARD_I2C -#define CONFIG_COMMANDS_I2C CFG_CMD_I2C -#else -#define CONFIG_COMMANDS_I2C 0 + #define CONFIG_CMD_I2C #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CONFIG_COMMANDS_CF | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CONFIG_COMMANDS_I2C | \ - CONFIG_COMMANDS_PCI | \ - CFG_CMD_SDRAM | \ - CFG_CMD_DATE | \ - CFG_CMD_CACHE | \ - CFG_CMD_IRQ) -#include <cmd_confdefs.h> - /* Watchdog */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -466,7 +472,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -489,7 +495,7 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ #endif @@ -614,7 +620,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -625,11 +631,11 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_MPC83XX_TSEC1 +#ifdef CONFIG_TSEC1 #define CONFIG_ETHADDR 00:E0:0C:00:8C:01 #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 #endif @@ -667,9 +673,10 @@ boards, we say we have two, but don't display a message if we find only one. */ " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ - " console=ttyS0," MK_STR(CONFIG_BAUDRATE) + " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE) #define CONFIG_EXTRA_ENV_SETTINGS \ + "console=" MK_STR(CONFIG_CONSOLE) "\0" \ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 79937dcd8f9..41f062ce72e 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -32,6 +32,8 @@ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -88,6 +90,7 @@ #define CFG_SICRL 0x40000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address @@ -309,13 +312,13 @@ /* * CS4 on Local Bus, to PIB */ -#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */ #define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* * CS5 on Local Bus, to PIB */ -#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */ #define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* @@ -348,10 +351,6 @@ #define CONFIG_OF_HAS_BD_T 1 #define CONFIG_OF_HAS_UBOOT_ENV 1 - -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8360@0" #define OF_SOC "soc8360@e0000000" #define OF_QE "qe@e0100000" @@ -457,41 +456,33 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#endif -#else +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ASKENV + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_ASKENV \ - | CFG_CMD_I2C ) + #define CONFIG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -502,7 +493,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -532,7 +523,7 @@ */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ #endif @@ -610,7 +601,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5aeea586800..be603ac117b 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -301,9 +301,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8540@0" #define OF_SOC "soc8540@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) @@ -366,14 +363,16 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #if CONFIG_HAS_FEC @@ -381,6 +380,7 @@ #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #endif /* Options are: TSEC[0-1], FEC */ @@ -407,37 +407,33 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #else - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #else - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -448,7 +444,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -469,7 +465,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -481,7 +477,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -493,6 +489,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD @@ -520,7 +517,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ - "ramdiskaddr=600000\0" \ + "ramdiskaddr=1000000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ "fdtaddr=400000\0" \ "fdtfile=your.fdt.dtb\0" @@ -540,7 +537,7 @@ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr" + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 418a3a38e68..e376c11656b 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -212,11 +212,14 @@ #elif defined(CONFIG_TSEC_ENET) #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_HAS_ETH0 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_HAS_ETH1 +#define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_MPC85XX_FEC 1 +#define CONFIG_HAS_ETH2 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define TSEC1_PHY_ADDR 7 #define TSEC2_PHY_ADDR 4 @@ -224,6 +227,10 @@ #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 #define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define FEC_FLAGS 0 + /* Options are: TSEC[0-1], FEC */ #define CONFIG_ETHPRIME "TSEC0" @@ -259,26 +266,33 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \ - | CFG_CMD_PCI | CFG_CMD_I2C ) & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS )) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \ - | CFG_CMD_I2C ) & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS )) -#endif -#else + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \ - | CFG_CMD_PING | CFG_CMD_I2C ) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) + #define CONFIG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -288,7 +302,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "MPC8540EVAL=> "/* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -308,7 +322,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -320,7 +334,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index fb360d282cd..4e061bd9ff2 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -312,9 +312,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8541@0" #define OF_SOC "soc8541@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) @@ -350,6 +347,13 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI2_IO_PHYS 0xe2100000 #define CFG_PCI2_IO_SIZE 0x100000 /* 1M */ +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif #if defined(CONFIG_PCI) @@ -373,17 +377,16 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" @@ -401,19 +404,28 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -423,7 +435,7 @@ extern unsigned long get_clock_freq(void); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -443,7 +455,7 @@ extern unsigned long get_clock_freq(void); /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -455,7 +467,7 @@ extern unsigned long get_clock_freq(void); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -466,6 +478,7 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 4c3430897da..f580ccadee5 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -34,14 +34,14 @@ #define CONFIG_MPC8544 1 #define CONFIG_MPC8544DS 1 -#undef CONFIG_PCI /* Enable PCI/PCIE */ -#undef CONFIG_PCI1 /* PCI controller 1 */ -#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ -#undef CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ -#undef CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */ -#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI1 1 /* PCI controller 1 */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ +#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #undef CONFIG_DDR_DLL @@ -52,6 +52,7 @@ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef #define CONFIG_DDR_ECC_CMD +#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ /* * When initializing flash, if we cannot find the manufacturer ID, @@ -70,7 +71,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ @@ -86,13 +87,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ #define CFG_MEMTEST_END 0x00400000 #define CFG_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ -#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ @@ -180,6 +181,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ @@ -251,9 +253,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8544@0" #define OF_SOC "soc8544@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) @@ -281,7 +280,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe1000000 -#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCI1_IO_SIZE 0x00010000 /* 64k */ /* PCI view of System Memory */ #define CFG_PCI_MEMORY_BUS 0x00000000 @@ -293,27 +292,27 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE #define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCIE2_IO_BASE 0x00000000 -#define CFG_PCIE2_IO_PHYS 0xe2000000 -#define CFG_PCIE2_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE2_IO_PHYS 0xe1010000 +#define CFG_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 2,tgtid 2, Base address a000 */ #define CFG_PCIE1_MEM_BASE 0xa0000000 #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE -#define CFG_PCIE1_MEM_SIZE 0x08000000 /* 128M */ -#define CFG_PCIE1_MEM_BASE2 0xa8000000 -#define CFG_PCIE1_MEM_PHYS2 CFG_PCIE1_MEM_BASE2 -#define CFG_PCIE1_MEM_SIZE2 0x04000000 /* 64M */ -#define CFG_PCIE1_IO_BASE 0x00000000 /* reuse mem LAW */ -#define CFG_PCIE1_IO_PHYS 0xaf000000 -#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe1020000 +#define CFG_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 3, direct to uli, tgtid 3, Base address b000 */ #define CFG_PCIE3_MEM_BASE 0xb0000000 #define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE -#define CFG_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCIE3_MEM_SIZE 0x00100000 /* 1M */ #define CFG_PCIE3_IO_BASE 0x00000000 -#define CFG_PCIE3_IO_PHYS 0xe3000000 +#define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ +#define CFG_PCIE3_MEM_BASE2 0xb0200000 +#define CFG_PCIE3_MEM_PHYS2 CFG_PCIE3_MEM_BASE2 +#define CFG_PCIE3_MEM_SIZE2 0x00200000 /* 1M */ #if defined(CONFIG_PCI) @@ -344,7 +343,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SATA_ULI5288 #define CFG_SCSI_MAX_SCSI_ID 4 #define CFG_SCSI_MAX_LUN 1 -#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE #endif /* SCSCI */ @@ -354,27 +353,28 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC1" -#define CONFIG_MPC85XX_TSEC3 1 -#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC3" -#undef CONFIG_MPC85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" #define TSEC1_PHY_ADDR 0 #define TSEC3_PHY_ADDR 1 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + #define TSEC1_PHYIDX 0 #define TSEC3_PHYIDX 0 #define CONFIG_ETHPRIME "eTSEC1" #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - #endif /* CONFIG_TSEC_ENET */ /* @@ -392,21 +392,32 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ - | CFG_CMD_BEDBUG \ - | CFG_CMD_NET) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI + #define CONFIG_CMD_BEDBUG + #define CONFIG_CMD_NET + #define CONFIG_CMD_SCSI + #define CONFIG_CMD_EXT2 #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -416,7 +427,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -431,12 +442,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ /* Cache Configuration */ -#define CFG_DCACHE_SIZE 32768 +#define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -448,7 +459,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -459,6 +470,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD @@ -472,7 +484,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HOSTNAME 8544ds_unknown #define CONFIG_ROOTPATH /nfs/mpc85xx -#define CONFIG_BOOTFILE 8544ds_tmt/uImage.uboot +#define CONFIG_BOOTFILE 8544ds/uImage.uboot +#define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ #define CONFIG_SERVERIP 192.168.0.1 #define CONFIG_GATEWAYIP 192.168.0.1 @@ -481,7 +494,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 @@ -489,10 +502,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define PCIE_ENV \ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ - "pcie1regs=setenv a e000a; run pciereg\0" \ - "pcie2regs=setenv a e0009; run pciereg\0" \ - "pcie3regs=setenv a e000b; run pciereg\0" \ - "pcieerr=md ${a}020 1; md ${a}e00;" \ + "pcieerr=md ${a}020 1; md ${a}e00 e;" \ "pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ "pci d.w $b.0 56 1;" \ "pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \ @@ -501,12 +511,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \ "pci w $b.0 130 ffffffff\0" \ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ - "pcie1err=setenv a e000a; run pcieerr\0" \ - "pcie2err=setenv a e0009; run pcieerr\0" \ - "pcie3err=setenv a e000b; run pcieerr\0" \ - "pcie1errc=setenv a e000a; run pcieerrc\0" \ - "pcie2errc=setenv a e0009; run pcieerrc\0" \ - "pcie3errc=setenv a e000b; run pcieerrc\0" + "pcie1regs=setenv a e000a; run pciereg\0" \ + "pcie2regs=setenv a e0009; run pciereg\0" \ + "pcie3regs=setenv a e000b; run pciereg\0" \ + "pcie1cfg=setenv b 3; run pciecfg\0" \ + "pcie2cfg=setenv b 5; run pciecfg\0" \ + "pcie3cfg=setenv b 0; run pciecfg\0" \ + "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ + "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \ + "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \ + "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \ + "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \ + "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0" #else #define PCIE_ENV "" #endif @@ -514,14 +530,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_PCI1) #define PCI_ENV \ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ - "echo e;md ${a}e00 9\0" \ + "echo e;md ${a}e00 9\0" \ "pci1regs=setenv a e0008; run pcireg\0" \ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ "pci d.w $b.0 56 1\0" \ - "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \ - "pci w.w $b.0 56 ffff\0" \ - "pci1err=setenv a e0008; run pcierr\0" \ - "pci1errc=setenv a e0008; run pcierrc\0" + "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ + "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \ + "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \ + "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0" #else #define PCI_ENV "" #endif @@ -541,25 +557,39 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define ENET_ENV "" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ - "ramdiskfile=8544ds_tmt/ramdisk.uboot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=8544ds_tmt/mpc8544ds.dtb\0" \ - "eoi=mw e00400b0 0\0" \ - "iack=md e00400a0 1\0" \ + "ramdiskfile=8544ds/ramdisk.uboot\0" \ + "dtbaddr=c00000\0" \ + "dtbfile=8544ds/mpc8544ds.dtb\0" \ + "bdev=sda3\0" \ + "eoi=mw e00400b0 0\0" \ + "iack=md e00400a0 1\0" \ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ - "ddrregs=setenv a e0002; run ddrreg\0" \ + "ddrregs=setenv a e0002; run ddrreg\0" \ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ - "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ - "guregs=setenv a e00e0; run gureg\0" \ + "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ + "guregs=setenv a e00e0; run gureg\0" \ "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ - "ecmregs=setenv a e0001; run ecmreg\0" \ - PCIE_ENV \ - PCI_ENV \ + "ecmregs=setenv a e0001; run ecmreg\0" \ + "lawregs=md e0000c08 4b\0" \ + "lbcregs=md e0005000 36\0" \ + "dma0regs=md e0021100 12\0" \ + "dma1regs=md e0021180 12\0" \ + "dma2regs=md e0021200 12\0" \ + "dma3regs=md e0021280 12\0" \ + PCIE_ENV \ + PCI_ENV \ ENET_ENV @@ -569,23 +599,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" -#define CONFIG_RAMBOOTCOMMAND \ +#define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/sda3 rw " \ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 680009d6006..60837151893 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2007 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -11,7 +11,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -36,8 +36,14 @@ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ -#define CONFIG_PCI -#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PCI /* enable any pci type devices */ +#define CONFIG_PCI1 /* PCI controller 1 */ +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#undef CONFIG_RIO +#undef CONFIG_PCI2 +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ @@ -46,6 +52,7 @@ #define CONFIG_DDR_ECC /* only for ECC DDR module */ #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ /* @@ -65,16 +72,16 @@ extern unsigned long get_clock_freq(void); /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ /* * Only possible on E500 Version 2 or newer cores. */ #define CONFIG_ENABLE_36BIT_PHYS 1 - #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CFG_DRAM_TEST /* memory test, takes time */ @@ -85,10 +92,14 @@ extern unsigned long get_clock_freq(void); * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ -#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) +#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) + /* * DDR Setup */ @@ -106,7 +117,6 @@ extern unsigned long get_clock_freq(void); #undef CONFIG_CLOCKS_IN_MHZ - /* * Local Bus Definitions */ @@ -124,9 +134,9 @@ extern unsigned long get_clock_freq(void); * Use GPCM = BRx[24:26] = 000 * Valid = BRx[31] = 1 * - * 0 4 8 12 16 20 24 28 - * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 - * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 + * 0 4 8 12 16 20 24 28 + * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 + * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 * * OR0, OR1: * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0 @@ -137,11 +147,12 @@ extern unsigned long get_clock_freq(void); * TRLX = use relaxed timing = ORx[29] = 1 * EAD = use external address latch delay = OR[31] = 1 * - * 0 4 8 12 16 20 24 28 - * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx + * 0 4 8 12 16 20 24 28 + * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx */ -#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 8M */ +#define CFG_BOOT_BLOCK 0xff000000 /* boot TLB block */ +#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */ #define CFG_BR0_PRELIM 0xff801001 #define CFG_BR1_PRELIM 0xff001001 @@ -156,7 +167,7 @@ extern unsigned long get_clock_freq(void); #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI @@ -166,7 +177,12 @@ extern unsigned long get_clock_freq(void); /* * SDRAM on the Local Bus */ -#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ +#define CFG_LBC_CACHE_SIZE 64 +#define CFG_LBC_NONCACHE_BASE 0xf8000000 /* Localbus non-cacheable */ +#define CFG_LBC_NONCACHE_SIZE 64 + +#define CFG_LBC_SDRAM_BASE CFG_LBC_CACHE_BASE /* Localbus SDRAM */ #define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ /* @@ -180,14 +196,14 @@ extern unsigned long get_clock_freq(void); * SDRAM for MSEL = BR2[24:26] = 011 * Valid = BR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 * * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into * FIXME: the top 17 bits of BR2. */ -#define CFG_BR2_PRELIM 0xf0001861 +#define CFG_BR2_PRELIM 0xf0001861 /* * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. @@ -196,19 +212,19 @@ extern unsigned long get_clock_freq(void); * 64MB mask for AM, OR2[0:7] = 1111 1100 * XAM, OR2[17:18] = 11 * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 + * 13 rows OR2[23-25] = 100 * EAD set for extra time OR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ #define CFG_OR2_PRELIM 0xfc006901 -#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CFG_LBC_LBCR 0x00000000 /* LB config reg */ -#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ +#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */ +#define CFG_LBC_LBCR 0x00000000 /* LB config reg */ +#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ +#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ /* * LSDMR masks @@ -236,7 +252,7 @@ extern unsigned long get_clock_freq(void); /* * Common settings for all Local Bus SDRAM commands. * At run time, either BSMA1516 (for CPU 1.1) - * or BSMA1617 (for CPU 1.0) (old) + * or BSMA1617 (for CPU 1.0) (old) * is OR'ed in too. */ #define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \ @@ -256,61 +272,63 @@ extern unsigned long get_clock_freq(void); * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0 * port-size = 8-bits = BR[19:20] = 01 * no parity checking = BR[21:22] = 00 - * GPMC for MSEL = BR[24:26] = 000 - * Valid = BR[31] = 1 + * GPMC for MSEL = BR[24:26] = 000 + * Valid = BR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801 * * For OR3, need: - * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 + * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 * disable buffer ctrl OR[19] = 0 - * CSNT OR[20] = 1 - * ACS OR[21:22] = 11 - * XACS OR[23] = 1 + * CSNT OR[20] = 1 + * ACS OR[21:22] = 11 + * XACS OR[23] = 1 * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe - * SETA OR[28] = 0 - * TRLX OR[29] = 1 - * EHTR OR[30] = 1 - * EAD extra time OR[31] = 1 + * SETA OR[28] = 0 + * TRLX OR[29] = 1 + * EHTR OR[30] = 1 + * EAD extra time OR[31] = 1 * - * 0 4 8 12 16 20 24 28 + * 0 4 8 12 16 20 24 28 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 */ #define CADMUS_BASE_ADDR 0xf8000000 -#define CFG_BR3_PRELIM 0xf8000801 -#define CFG_OR3_PRELIM 0xfff00ff7 +#define CFG_BR3_PRELIM 0xf8000801 +#define CFG_OR3_PRELIM 0xfff00ff7 #define CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_LOCK 1 #define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* Serial Port */ -#define CONFIG_CONS_INDEX 2 +#define CONFIG_CONS_INDEX 2 #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_REG_SIZE 1 #define CFG_NS16550_CLK get_bus_freq(0) -#define CFG_BAUDRATE_TABLE \ +#define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) /* Use the HUSH parser */ #define CFG_HUSH_PARSER -#ifdef CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif @@ -318,9 +336,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8548@0" #define OF_SOC "soc8548@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) @@ -331,55 +346,74 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ +#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */ + #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 -#define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */ +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ -#define CFG_PCI2_MEM_BASE 0x90000000 +#ifdef CONFIG_PCI2 +#define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI2_IO_BASE 0x00000000 #define CFG_PCI2_IO_PHYS 0xe2800000 -#define CFG_PCI2_IO_SIZE 0x00800000 /* 8M */ +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ +#endif -#define CFG_PEX_MEM_BASE 0xa0000000 -#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE -#define CFG_PEX_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PEX_IO_BASE 0x00000000 -#define CFG_PEX_IO_PHYS 0xe3000000 -#define CFG_PEX_IO_SIZE 0x01000000 /* 16M */ +#ifdef CONFIG_PCIE1 +#define CFG_PCIE1_MEM_BASE 0xa0000000 +#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE +#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe3000000 +#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */ +#endif +#ifdef CONFIG_RIO /* * RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xC0000000 #define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */ +#endif + +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif #if defined(CONFIG_PCI) #define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_85XX_PCI2 +#define CONFIG_PCI_PNP /* do pci plug-and-play */ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 #endif /* CONFIG_PCI */ @@ -387,18 +421,18 @@ extern unsigned long get_clock_freq(void); #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1" -#define CONFIG_MPC85XX_TSEC3 1 -#define CONFIG_MPC85XX_TSEC3_NAME "eTSEC2" -#undef CONFIG_MPC85XX_TSEC4 -#define CONFIG_MPC85XX_TSEC4_NAME "eTSEC3" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC1" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC2" +#define CONFIG_TSEC4 +#define CONFIG_TSEC4_NAME "eTSEC3" #undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 @@ -410,10 +444,14 @@ extern unsigned long get_clock_freq(void); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" - +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #endif /* CONFIG_TSEC_ENET */ /* @@ -427,19 +465,28 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -449,7 +496,7 @@ extern unsigned long get_clock_freq(void); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -464,12 +511,12 @@ extern unsigned long get_clock_freq(void); * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -481,7 +528,7 @@ extern unsigned long get_clock_freq(void); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -492,58 +539,154 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD +#define CONFIG_HAS_ETH0 +#define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD +#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD #define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif -#define CONFIG_IPADDR 192.168.1.253 +#define CONFIG_IPADDR 192.168.1.253 -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH /nfsroot -#define CONFIG_BOOTFILE your.uImage +#define CONFIG_HOSTNAME unknown +#define CONFIG_ROOTPATH /nfsroot +#define CONFIG_BOOTFILE 8548cds/uImage.uboot +#define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ -#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ +#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS1\0" \ - "ramdiskaddr=600000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=your.fdt.dtb\0" +#if defined(CONFIG_PCIE1) +#define PCIE_ENV \ + "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ + "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ + "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ + "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \ + "pci d $b.0 130 1\0" \ + "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \ + "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\ + "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \ + "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ + "pcie1regs=setenv a e000a; run pciereg\0" \ + "pcie1cfg=setenv b 3; run pciecfg\0" \ + "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ + "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" +#else +#define PCIE_ENV "" +#endif + +#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2) +#define PCI_ENV \ + "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ + "echo e;md ${a}e00 9\0" \ + "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \ + "pci d.w $b.0 56 1\0" \ + "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ + "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" +#else +#define PCI_ENV "" +#endif + +#if defined(CONFIG_PCI1) +#define PCI_ENV1 \ + "pci1regs=setenv a e0008; run pcireg\0" \ + "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \ + "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0" +#else +#define PCI_ENV1 "" +#endif + +#if defined(CONFIG_PCI2) +#define PCI_ENV2 \ + "pci2regs=setenv a e0009; run pcireg\0" \ + "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \ + "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0" +#else +#define PCI_ENV2 "" +#endif +#if defined(CONFIG_TSEC_ENET) +#define ENET_ENV \ + "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ + "md ${a}098 2\0" \ + "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ + "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ + "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ + "echo mib;md ${a}680 31\0" \ + "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ + "enet1regs=setenv a e0024; run enetreg\0" \ + "enet2regs=setenv a e0025; run enetreg\0" \ + "enet3regs=setenv a e0026; run enetreg\0" \ + "enet4regs=setenv a e0027; run enetreg\0" +#else +#define ENET_ENV "" +#endif -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "consoledev=ttyS1\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=mpc8548cds.dtb\0" \ + "eoi=mw e00400b0 0\0" \ + "iack=md e00400a0 1\0" \ + "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ + "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ + "ddrregs=setenv a e0002; run ddrreg\0" \ + "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ + "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ + "guregs=setenv a e00e0; run gureg\0" \ + "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ + "ecmregs=setenv a e0001; run ecmreg\0" \ + "lawregs=md e0000c08 4b\0" \ + "lbcregs=md e0005000 36\0" \ + "dma0regs=md e0021100 12\0" \ + "dma1regs=md e0021180 12\0" \ + "dma2regs=md e0021200 12\0" \ + "dma3regs=md e0021280 12\0" \ + PCIE_ENV \ + PCI_ENV \ + PCI_ENV1 \ + PCI_ENV2 \ + ENET_ENV + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 4c8b4e73f3b..1d1b7c90795 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -312,9 +312,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8555@0" #define OF_SOC "soc8555@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) @@ -350,6 +347,13 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI2_IO_PHYS 0xe2100000 #define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ +#ifdef CONFIG_LEGACY +#define BRIDGE_ID 17 +#define VIA_ID 2 +#else +#define BRIDGE_ID 28 +#define VIA_ID 4 +#endif #if defined(CONFIG_PCI) @@ -373,17 +377,16 @@ extern unsigned long get_clock_freq(void); #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" @@ -401,19 +404,28 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -423,7 +435,7 @@ extern unsigned long get_clock_freq(void); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -443,7 +455,7 @@ extern unsigned long get_clock_freq(void); /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -455,7 +467,7 @@ extern unsigned long get_clock_freq(void); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -466,6 +478,7 @@ extern unsigned long get_clock_freq(void); /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 21e66376805..a8f362fa134 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -43,9 +43,7 @@ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ -#define CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ +#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ @@ -294,9 +292,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8560@0" #define OF_SOC "soc8560@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) @@ -349,29 +344,33 @@ #endif /* CONFIG_PCI */ -#if defined(CONFIG_TSEC_ENET) +#ifdef CONFIG_TSEC_ENET #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI 1 #endif +#ifndef CONFIG_MII #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC +#endif +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" -#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ +#endif /* CONFIG_TSEC_ENET */ + +#ifdef CONFIG_ETHER_ON_FCC /* CPM FCC Ethernet */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ @@ -392,7 +391,10 @@ #define FETH3_RST 0x80 #endif /* CONFIG_ETHER_INDEX */ -#define CONFIG_MII /* MII PHY management */ +#ifndef CONFIG_MII +#define CONFIG_MII 1 /* MII PHY management */ +#endif + #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ /* @@ -432,46 +434,36 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & ~(CFG_CMD_ENV)) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -482,7 +474,7 @@ #define CFG_LOAD_ADDR 0x1000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -503,7 +495,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -515,7 +507,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -527,6 +519,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD @@ -553,9 +546,11 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" + "consoledev=ttyCPM\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8560ads.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -563,14 +558,16 @@ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 3f65644fdd4..ba744e99f8d 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -28,20 +28,21 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ -#undef CONFIG_PCI +#define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ /*#define CONFIG_DDR_2T_TIMING Sets the 2T timing bit */ /*#define CONFIG_DDR_ECC*/ /* only for ECC DDR module */ -/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */ +/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -62,9 +63,9 @@ extern unsigned long get_clock_freq(void); /* * These can be toggled for performance analysis, otherwise use default. */ -/*#define CONFIG_L2_CACHE*/ /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ /* * Only possible on E500 Version 2 or newer cores. @@ -292,11 +293,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8568@0" #define OF_SOC "soc8568@e0000000" +#define OF_QE "qe@e0080000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600" @@ -306,11 +305,14 @@ extern unsigned long get_clock_freq(void); #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR 0x52 #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 /* * General PCI @@ -318,7 +320,7 @@ extern unsigned long get_clock_freq(void); */ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 #define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */ @@ -337,6 +339,44 @@ extern unsigned long get_clock_freq(void); #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ +#ifdef CONFIG_QE +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#ifndef CONFIG_TSEC_ENET +#define CONFIG_ETHPRIME "FSL UEC0" +#endif +#define CONFIG_PHY_MODE_NEED_CHANGE +#define CONFIG_eTSEC_MDIO_BUS + +#ifdef CONFIG_eTSEC_MDIO_BUS +#define CONFIG_MIIM_ADDRESS 0xE0024520 +#endif + +#define CONFIG_UEC_ETH1 /* GETH1 */ + +#ifdef CONFIG_UEC_ETH1 +#define CFG_UEC1_UCC_NUM 0 /* UCC1 */ +#define CFG_UEC1_RX_CLK QE_CLK_NONE +#define CFG_UEC1_TX_CLK QE_CLK16 +#define CFG_UEC1_ETH_TYPE GIGA_ETH +#define CFG_UEC1_PHY_ADDR 7 +#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII +#endif + +#define CONFIG_UEC_ETH2 /* GETH2 */ + +#ifdef CONFIG_UEC_ETH2 +#define CFG_UEC2_UCC_NUM 1 /* UCC2 */ +#define CFG_UEC2_RX_CLK QE_CLK_NONE +#define CFG_UEC2_TX_CLK QE_CLK16 +#define CFG_UEC2_ETH_TYPE GIGA_ETH +#define CFG_UEC2_PHY_ADDR 1 +#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII +#endif +#endif /* CONFIG_QE */ + #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -345,21 +385,17 @@ extern unsigned long get_clock_freq(void); #endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) - #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI 1 #endif +#if defined(CONFIG_TSEC_ENET) + #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "eTSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "eTSEC1" -#undef CONFIG_MPC85XX_TSEC3 -#undef CONFIG_MPC85XX_TSEC4 -#undef CONFIG_MPC85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 3 @@ -367,7 +403,10 @@ extern unsigned long get_clock_freq(void); #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -/* Options are: eTSEC[0-3] */ +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: eTSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC0" #endif /* CONFIG_TSEC_ENET */ @@ -383,19 +422,29 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -405,7 +454,7 @@ extern unsigned long get_clock_freq(void); #define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -425,7 +474,7 @@ extern unsigned long get_clock_freq(void); /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -437,7 +486,7 @@ extern unsigned long get_clock_freq(void); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -447,12 +496,15 @@ extern unsigned long get_clock_freq(void); */ /* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_HAS_ETH3 +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index bbe35053dd7..7d8a380dc04 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -46,8 +46,10 @@ #define CFG_RESET_ADDRESS 0xfff00100 -/*#undef CONFIG_PCI*/ -#define CONFIG_PCI +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ +#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -76,6 +78,9 @@ #define L2_ENABLE (L2CR_L2E) #ifndef CONFIG_SYS_CLK_FREQ +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +#endif #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) #endif @@ -93,6 +98,9 @@ #define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) + /* * DDR Setup */ @@ -177,6 +185,7 @@ #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ +#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ #define PIXIS_ID 0x0 /* Board ID at offset 0 */ #define PIXIS_VER 0x1 /* Board version at offset 1 */ @@ -232,7 +241,7 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ /* Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -260,9 +269,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8641@0" #define OF_SOC "soc8641@f8000000" #define OF_TBCLK (bd->bi_busfreq / 4) @@ -296,9 +302,9 @@ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CFG_PCI1_IO_BASE 0xe2000000 -#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xe2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ /* PCI view of System Memory */ #define CFG_PCI_MEMORY_BUS 0x00000000 @@ -311,10 +317,10 @@ #define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ -#define CFG_PCI2_IO_BASE 0xe3000000 -#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS 0xe3000000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI) @@ -330,12 +336,43 @@ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP +/************************************************************ + * USB support + ************************************************************/ +#define CONFIG_PCI_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_KEYBOARD 1 +#define CFG_DEVICE_DEREGISTER +#define CFG_USB_EVENT_POLL 1 +#define CFG_USB_OHCI_SLOT_NAME "ohci_pci" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #if !defined(CONFIG_PCI_PNP) #define PCI_ENET0_IOADDR 0xe0000000 #define PCI_ENET0_MEMADDR 0xe0000000 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ #endif +/*PCIE video card used*/ +#define VIDEO_IO_OFFSET CFG_PCI2_IO_PHYS + +/*PCI video card used*/ +/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/ + +/* video */ +#define CONFIG_VIDEO + +#if defined(CONFIG_VIDEO) +#define CONFIG_BIOSEMU +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +/*#define CONFIG_CONSOLE_CURSOR*/ +#define CFG_ISA_IO_BASE_ADDRESS CFG_PCI2_IO_PHYS +#endif + #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_DOS_PARTITION @@ -349,6 +386,8 @@ #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE #endif +#define CONFIG_MPC86XX_PCI2 + #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) @@ -359,14 +398,14 @@ #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC86XX_TSEC1 1 -#define CONFIG_MPC86XX_TSEC1_NAME "eTSEC1" -#define CONFIG_MPC86XX_TSEC2 1 -#define CONFIG_MPC86XX_TSEC2_NAME "eTSEC2" -#define CONFIG_MPC86XX_TSEC3 1 -#define CONFIG_MPC86XX_TSEC3_NAME "eTSEC3" -#define CONFIG_MPC86XX_TSEC4 1 -#define CONFIG_MPC86XX_TSEC4_NAME "eTSEC4" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "eTSEC4" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 @@ -376,6 +415,10 @@ #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define CONFIG_ETHPRIME "eTSEC1" @@ -396,20 +439,20 @@ * 0xa000_0000 512M PCI-Express 2 Memory * Changed it for operating from 0xd0000000 */ -#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ +#define CFG_DBAT1L ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT1U CFG_DBAT1U /* * BAT2 512M Cache-inhibited, guarded * 0xc000_0000 512M RapidIO Memory */ -#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ +#define CFG_DBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) -#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT2U (CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT2U CFG_DBAT2U /* @@ -428,10 +471,10 @@ * 0xe300_0000 16M PCI-Express 2 I/0 * Note that this is at 0xe0000000 */ -#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ +#define CFG_DBAT4L ( CFG_PCI1_IO_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) -#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_DBAT4U (CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CFG_IBAT4U CFG_DBAT4U /* @@ -463,8 +506,8 @@ */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 - #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x60000) + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 #else #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ @@ -475,39 +518,34 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C \ - | CFG_CMD_SCSI \ - | CFG_CMD_EXT2) \ - & \ - ~(CFG_CMD_ENV)) - #else - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_SCSI \ - | CFG_CMD_EXT2) - #else - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV +#endif + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI + #define CONFIG_CMD_SCSI + #define CONFIG_CMD_EXT2 #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -518,7 +556,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -539,8 +577,8 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#if defined(CONFIG_CMD_KGDB) + #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif /* @@ -551,9 +589,9 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#if defined(CONFIG_CMD_KGDB) + #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ + #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* @@ -568,6 +606,7 @@ #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif +#define CONFIG_HAS_ETH0 1 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 #define CONFIG_HAS_ETH3 1 @@ -577,6 +616,7 @@ #define CONFIG_HOSTNAME unknown #define CONFIG_ROOTPATH /opt/nfsroot #define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 @@ -592,10 +632,17 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ - "dtbaddr=400000\0" \ + "dtbaddr=c00000\0" \ "dtbfile=mpc8641_hpcn.dtb\0" \ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index da52e0ec0b8..f8cf01e5d3e 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -52,11 +52,20 @@ #define CONFIG_BOOTDELAY 5 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> /* @@ -280,7 +289,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 88eefa19074..0defafec260 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -76,15 +76,44 @@ #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 60 -#define CONFIG_COMMANDS ( CFG_CMD_ASKENV | CFG_CMD_BOOTD | CFG_CMD_CACHE | CFG_CMD_DHCP | \ - CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \ - CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN ) +/* + * Command line configuration. + */ + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_RUN -#define CONFIG_BOOTP_MASK ( 0xffffffff ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET + /* * Miscellaneous configurable options @@ -310,7 +339,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h index 5995918266d..75efd1e0e42 100644 --- a/include/configs/MVS1.h +++ b/include/configs/MVS1.h @@ -63,27 +63,36 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_VENDOREX ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_VENDOREX #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -/* MVsensor uses a really minimal U-Boot ! */ -#define CONFIG_COMMANDS (CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_IMI | \ - CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_DHCP | \ - CFG_CMD_ENV | \ - CFG_CMD_BOOTD | \ - CFG_CMD_RUN ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_RUN + /* * Miscellaneous configurable options @@ -96,7 +105,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -172,7 +181,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NC650.h b/include/configs/NC650.h index a12c8da13ec..c051a351e85 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -85,7 +85,15 @@ #undef CONFIG_STATUS_LED /* Status LED disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_FEC_ENET 1 /* use FEC ethernet */ #define FEC_ENET @@ -134,25 +142,28 @@ #define CONFIG_RTC_PCF8563 #define CFG_I2C_RTC_ADDR 0x51 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_NAND | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NAND +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -230,7 +241,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index 444f721cc85..bb3d19d14ca 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -82,7 +82,15 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION @@ -105,20 +113,22 @@ #define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_NAND | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_MII | \ - CFG_CMD_CDP \ - ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_CDP + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -128,7 +138,7 @@ #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -220,7 +230,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 25b63457c74..19743c04e87 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -77,7 +77,16 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION @@ -111,26 +120,28 @@ CFG_POST_CODEC | \ CFG_POST_DSP ) -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_CDP | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_FAT | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_PING | \ - 0) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_PING + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -140,7 +151,7 @@ #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -223,7 +234,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index e20e72495cc..fb8085d56c7 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -82,7 +82,16 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION @@ -105,20 +114,22 @@ #define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_NAND | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_MII | \ - CFG_CMD_CDP \ - ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_CDP + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -128,7 +139,7 @@ #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -220,7 +231,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index e30be0987aa..d4cb9e7ea9e 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -81,35 +81,45 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS_BASE ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 -#define CONFIG_COMMANDS (CONFIG_COMMANDS_BASE | CFG_CMD_NAND) -#else -#define CONFIG_COMMANDS CONFIG_COMMANDS_BASE +#define CONFIG_CMD_NAND #endif + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -192,7 +202,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index d994420096b..4cd44720611 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -84,7 +84,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -93,16 +101,19 @@ #define CONFIG_ISP1362_USB /* ISP1362 USB OTG controller */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -117,7 +128,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -201,7 +212,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/NX823.h b/include/configs/NX823.h index 1cb8b8ff3b5..524aa0621b9 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -55,22 +55,35 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #undef CONFIG_WATCHDOG /* watchdog disabled, for now */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_AUTOSCRIPT) #define CONFIG_AUTOSCRIPT +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_AUTOSCRIPT + + /* call various generic functions */ #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -152,7 +165,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index aa9d1ba735a..5840ea25f4b 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -54,20 +54,32 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ELF +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -77,7 +89,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -215,7 +227,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index 2e7c505f99e..937df229f16 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -54,20 +54,32 @@ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ELF +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -77,7 +89,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -213,7 +225,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/OXC.h b/include/configs/OXC.h index 787407c5eb8..8d61bcd2d41 100644 --- a/include/configs/OXC.h +++ b/include/configs/OXC.h @@ -51,10 +51,23 @@ #define CONFIG_BAUDRATE 9600 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + /* * Miscellaneous configurable options @@ -299,7 +312,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index a933e1b180c..ef970f1cd7e 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -120,30 +120,40 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_UNIVERSE| \ - CFG_CMD_BSP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_UNIVERSE +#define CONFIG_CMD_BSP + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -396,7 +406,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PATI.h b/include/configs/PATI.h index d88fff33ead..0de7591da66 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -39,14 +39,35 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | \ - CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ENV | CFG_CMD_REGINFO | \ - CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_RUN | CFG_CMD_BSP | \ - CFG_CMD_IMI | CFG_CMD_EEPROM | CFG_CMD_IRQ | CFG_CMD_MISC \ -) -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_ENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_BSP +#define CONFIG_CMD_IMI +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MISC + #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -71,7 +92,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "pati=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 027dd22bf46..d6e7082f6a9 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -68,17 +68,29 @@ #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -97,7 +109,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -244,7 +256,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h index 3a7f7f06474..24b25d98500 100644 --- a/include/configs/PCI5441.h +++ b/include/configs/PCI5441.h @@ -122,22 +122,32 @@ #define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) #define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES + /*------------------------------------------------------------------------ * MISC diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index 3a97fbcbde8..268b0343a36 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -53,30 +53,37 @@ #define CONFIG_PREBOOT "" #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_ELF | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY /* @@ -223,7 +230,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index 130beb78e63..250b5860481 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -53,32 +53,39 @@ #define CONFIG_PREBOOT "" #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_ELF | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SCSI | \ - CFG_CMD_SNTP ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_SNTP #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) - */ -#include <cmd_confdefs.h> - #define CFG_NAND_LEGACY /* @@ -225,7 +232,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 806e95f4808..efa015746e1 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -40,33 +40,42 @@ ***********************************************************/ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ -/*********************************************************** - * Command definitions - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_IDE | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_CACHE | \ - CFG_CMD_IRQ | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_REGINFO | \ - CFG_CMD_FDC | \ - CFG_CMD_SCSI | \ - CFG_CMD_FAT | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_USB | \ - CFG_CMD_MII | \ - CFG_CMD_SDRAM | \ - CFG_CMD_DOC | \ - CFG_CMD_PING | \ - CFG_CMD_SAVES | \ - CFG_CMD_BSP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FDC +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_FAT +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_USB +#define CONFIG_CMD_MII +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_DOC +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_BSP + #define CFG_NAND_LEGACY @@ -150,7 +159,7 @@ **********************************************************/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -227,7 +236,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -366,7 +375,7 @@ /************************************************************ * Debug support ************************************************************/ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index 83a7ec27b43..d90351add35 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -160,30 +160,41 @@ #define CONFIG_IPADDR 192.168.2.21 #define CONFIG_SERVERIP 192.168.2.16 -/*------------------------------------------------------------------------ - * COMMANDS - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IRQ | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_SAVES ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN +#define CONFIG_CMD_SAVES + /*------------------------------------------------------------------------ * COMPACT FLASH *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(CONFIG_CMD_IDE) #define CONFIG_IDE_PREINIT /* Implement id_preinit */ #define CFG_IDE_MAXBUS 1 /* 1 IDE bus */ #define CFG_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */ @@ -201,12 +212,12 @@ #define CFG_CF_POWER 0x00900890 /* CF Power FET PIO base*/ #define CFG_CF_ATASEL 0x009008a0 /* CF ATASEL PIO base */ -#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */ +#endif /*------------------------------------------------------------------------ * JFFS2 *----------------------------------------------------------------------*/ -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) #define CFG_JFFS_CUSTOM_PART /* board defined part */ #endif diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index d02c39b28f9..652210c19da 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -61,19 +61,34 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -81,10 +96,6 @@ #define CONFIG_SUPPORT_VFAT #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ -#define CONFIG_AUTO_UPDATE_SHOW 1 /* use board show routine */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -104,7 +115,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -156,38 +167,18 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff @@ -264,11 +255,6 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* test-only */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ -#endif - /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) @@ -294,9 +280,6 @@ #define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/ /* total size of a CAT24WC16 is 2048 bytes */ -#define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ -#define CFG_NVRAM_SIZE 242 /* NVRAM size */ - /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ @@ -305,7 +288,7 @@ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */ -#if 1 /* test-only */ + /* CAT24WC08/16... */ #define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ /* mask of address bits that overflow into the "EEPROM chip address" */ @@ -313,15 +296,6 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ /* 16 byte page write mode using*/ /* last 4 bits of the address */ -#else -/* CAT24WC32/64... */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01 -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ - /* 32 byte page write mode using*/ - /* last 5 bits of the address */ -#endif #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #define CFG_EEPROM_PAGE_WRITE_ENABLE @@ -331,7 +305,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 9c241e67e73..5ba8f4a4e2a 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -40,11 +40,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -77,12 +72,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #undef CONFIG_NS8382X -#define ADD_PCI_CMD CFG_CMD_PCI - -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -91,39 +80,48 @@ /* USB */ #if 1 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif -#if defined(CONFIG_BOOT_ROM) -#define ADD_DOC_CMD 0 -#else -#define ADD_DOC_CMD CFG_CMD_DOC +#if !defined(CONFIG_BOOT_ROM) /* DoC requires legacy NAND for now */ #define CFG_NAND_LEGACY #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_DOC_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +#if !defined(CONFIG_BOOT_ROM) +#define CONFIG_CMD_DOC +#endif + +#if defined(CONFIG_MPC5200) +#define CONFIG_CMD_PCI +#endif + /* * Autobooting @@ -160,7 +158,7 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #endif /* * I2C configuration @@ -294,7 +292,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -310,6 +308,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 88fdb51adef..c80b1538807 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -103,8 +103,7 @@ * - CONFIG_NET_MULTI must be defined * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #define CONFIG_NET_MULTI #undef CONFIG_ETHER_NONE /* define if ether on something else */ @@ -152,33 +151,34 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP #ifdef CONFIG_PCI -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) -#else /* ! PCI */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#endif /* CONFIG_PCI */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_PCI +#endif + #define CFG_NAND_LEGACY @@ -197,7 +197,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -345,7 +345,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 37ee9771b52..8f5be5f63a5 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -103,8 +103,7 @@ * - CONFIG_NET_MULTI must be defined * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #define CONFIG_NET_MULTI #undef CONFIG_ETHER_NONE /* define if ether on something else */ @@ -152,33 +151,34 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP #ifdef CONFIG_PCI -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) -#else /* ! PCI */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#endif /* CONFIG_PCI */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_PCI +#endif + /* * Disk-On-Chip configuration @@ -196,7 +196,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -338,7 +338,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 4fb54402b1b..a6a1e738a80 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -262,23 +262,27 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_MPC85XX_FEC 1 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 1 #define CONFIG_HAS_ETH2 1 @@ -303,43 +307,36 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #else - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_EEPROM \ - | CFG_CMD_DATE \ - | CFG_CMD_MII \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #else - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_EEPROM \ - | CFG_CMD_DATE \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -350,7 +347,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -372,7 +369,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -384,7 +381,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 87ab9348735..9a17e3d7333 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -258,15 +258,16 @@ #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #endif /* CONFIG_TSEC_ENET */ @@ -306,41 +307,35 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #else - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_EEPROM \ - | CFG_CMD_DATE \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #else - #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_EEPROM \ - | CFG_CMD_DATE \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -351,7 +346,7 @@ #define CFG_LOAD_ADDR 0x1000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -373,7 +368,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -385,7 +380,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -397,6 +392,7 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:40:42:01:00:00 #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:40:42:01:00:01 diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 6e0bd7f23ec..b29f368f57c 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -63,25 +63,37 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_I2C | \ - CFG_CMD_PING | \ - CFG_CMD_UNIVERSE | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_UNIVERSE +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -100,7 +112,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -263,7 +275,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PN62.h b/include/configs/PN62.h index a717659bb69..72acf5ae8d5 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -42,15 +42,29 @@ #define CONFIG_CONS_INDEX 1 -#define REMOVE_COMMANDS ( CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_LOADS | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMLS ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_BSP + +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS -#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~REMOVE_COMMANDS) |\ - CFG_CMD_PCI |\ - CFG_CMD_BSP) #define CONFIG_BAUDRATE 19200 /* console baudrate */ @@ -82,10 +96,6 @@ "loadp 200000; bootm" #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - - /* * Miscellaneous configurable options */ @@ -287,7 +297,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 16e2cc6d648..8a74c4f5c90 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -113,26 +113,38 @@ #endif #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_M41T11 1 /* uses a M41T00 RTC */ @@ -162,7 +174,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -417,6 +429,8 @@ #define CFG_ENV_ADDR_REDUND 0xFFFFA000 #define CFG_ENV_SIZE_REDUND 0x2000 +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + #endif /* ENVIRONMENT_IN_EEPROM */ @@ -446,7 +460,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/QS823.h b/include/configs/QS823.h index 235bc480c7f..3657feaf703 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -189,27 +189,37 @@ #undef CONFIG_STATUS_LED /* Status LED disabled */ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_DATE | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_RUN) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_RUN + /*----------------------------------------------------------------------- * Environment variable storage is in FLASH, one sector before U-boot @@ -228,7 +238,7 @@ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -303,7 +313,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 967582b45ed..3db539fa90a 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -189,27 +189,37 @@ #undef CONFIG_STATUS_LED /* Status LED disabled */ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_DATE | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_RUN) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_RUN + /*----------------------------------------------------------------------- * Environment variable storage is in FLASH, one sector before U-boot @@ -228,7 +238,7 @@ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -303,7 +313,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 32faa61607b..b3442de3627 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -92,23 +92,33 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_NET | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE /* TODO */ @@ -136,7 +146,7 @@ CONFIG_SPI #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -210,7 +220,7 @@ CONFIG_SPI * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index 82228c0126b..a98b4af29e3 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -79,7 +79,14 @@ #define CONFIG_CAN_DRIVER /* CAN Driver support enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -111,20 +118,23 @@ #define CFG_I2C_KEY_ADDR 0x9 /* Keyboard coprocessor */ #define CFG_I2C_TEM_ADDR 0x49 /* Temperature Sensors */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NFS | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BMP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -134,7 +144,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -223,12 +233,13 @@ #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment */ #define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment sector */ #define CFG_ENV_SIZE 0x4000 /* Used Size of Environment sector */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 242c837a3b8..2f6de815514 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -79,7 +79,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #undef CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -94,42 +102,45 @@ #define CFG_EEPROM_WRITE_BITS 4 #define CFG_EEPROM_WRITE_DELAY_MS 10 -#define CONFIG_COMMANDS ( CFG_CMD_ALL & \ - ~CFG_CMD_BSP & \ - ~CFG_CMD_DATE & \ - ~CFG_CMD_DISPLAY& \ - ~CFG_CMD_DTT & \ - ~CFG_CMD_EXT2 & \ - ~CFG_CMD_FDC & \ - ~CFG_CMD_FDOS & \ - ~CFG_CMD_HWFLOW & \ - ~CFG_CMD_IDE & \ - ~CFG_CMD_IRQ & \ - ~CFG_CMD_JFFS2 & \ - ~CFG_CMD_MII & \ - ~CFG_CMD_MMC & \ - ~CFG_CMD_NAND & \ - ~CFG_CMD_PCI & \ - ~CFG_CMD_PCMCIA & \ - ~CFG_CMD_REISER & \ - ~CFG_CMD_SCSI & \ - ~CFG_CMD_SETGETDCR & \ - ~CFG_CMD_SNTP & \ - ~CFG_CMD_SPI & \ - ~CFG_CMD_UNIVERSE & \ - ~CFG_CMD_USB & \ - ~CFG_CMD_VFD & \ - ~CFG_CMD_XIMG ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DATE +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SNTP +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -205,7 +216,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index 591382cd24d..793b1db8894 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -88,15 +88,26 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ -#define CONFIG_COMMANDS ((CFG_CMD_ALL & ~CFG_CMD_NONSTD) | CFG_CMD_ELF) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -104,7 +115,7 @@ #define CFG_RESET_ADDRESS 0x80000000 #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -182,7 +193,7 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0xFF000000 -#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -222,7 +233,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 48ada0ed9b6..3c5e6b89139 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -62,17 +62,28 @@ #define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -154,7 +165,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index 31025473f43..872765c92f4 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -115,29 +115,36 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_STATUS_LED /* disturbs display. Status LED disabled. */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you don't want the advanced function */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DHCP + #ifdef CONFIG_SPLASH_SCREEN -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_REGINFO | \ - CFG_CMD_DHCP ) -#else -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_REGINFO | \ - CFG_CMD_DHCP ) -#endif /* CONFIG_SPLASH_SCREEN */ +#define CONFIG_CMD_BMP +#endif + /* test-only */ #define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ @@ -147,16 +154,13 @@ #endif /* 1 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "u-boot>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -200,7 +204,7 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0xFF000000 -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -239,7 +243,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index 45907aa0e79..dfadd2a11f0 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -91,8 +91,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */ @@ -150,13 +149,28 @@ /* Monitor Command Prompt */ #define CFG_PROMPT "=> " -/* What U-Boot subsytems do you want enabled? */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ASKENV | \ - CFG_CMD_I2C | \ - CFG_CMD_REGINFO & \ - ~CFG_CMD_KGDB ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_KGDB + /* Where do the internal registers live? */ #define CFG_IMMR 0xF0000000 @@ -176,13 +190,10 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -310,7 +321,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 3885bcdb1ef..32e22854545 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -92,7 +92,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -135,23 +143,26 @@ #endif /* CONFIG_SOFT_I2C */ -#define CONFIG_COMMANDS ( ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_DATE ) & \ - ~( CFG_CMD_PCMCIA | \ - CFG_CMD_IDE ) ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE + +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_IDE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -224,11 +235,13 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index dbc57e8b271..d7652fa9ba5 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -62,8 +62,8 @@ * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CFG_CMD_NET must - * be removed from CONFIG_COMMANDS to remove support for networking. + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ @@ -125,22 +125,33 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm FE040000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -158,7 +169,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -184,7 +195,7 @@ #define CFG_DIRECT_FLASH_TFTP -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) #define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS #define CFG_JFFS2_SORT_FRAGMENTS @@ -205,7 +216,7 @@ #define MTDIDS_DEFAULT "nor0=rattler-0" #define MTDPARTS_DEFAULT "mtdparts=rattler-0:-@1m(jffs2)" */ -#endif /* CFG_CMD_JFFS2 */ +#endif /* CONFIG_CMD_JFFS2 */ #define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) @@ -256,7 +267,7 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index f8e3397a3f0..f2c3699ab74 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -338,28 +338,37 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) - #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -368,7 +377,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "SBC8540=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -389,7 +398,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -401,7 +410,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/SCM.h b/include/configs/SCM.h index e263db65a2f..f900968c5a1 100644 --- a/include/configs/SCM.h +++ b/include/configs/SCM.h @@ -133,8 +133,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. * * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the * X.29 connector, and FCC2 is hardwired to the X.1 connector) @@ -191,23 +190,33 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_BSP) +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_BSP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -353,7 +362,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/SL8245.h b/include/configs/SL8245.h index 61896d0d7d1..4d9d41b9277 100644 --- a/include/configs/SL8245.h +++ b/include/configs/SL8245.h @@ -53,11 +53,22 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#include <cmd_confdefs.h> +#define CONFIG_CMD_PCI /* @@ -255,7 +266,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 49776291211..41a54f0f5ad 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -68,23 +68,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) && defined(KGDB_DEBUG) +#if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -167,7 +178,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h new file mode 100644 index 00000000000..a5d3d695889 --- /dev/null +++ b/include/configs/SMN42.h @@ -0,0 +1,206 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Configuation settings for the SMN42 board from Siemens. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start u-boot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#undef CONFIG_INIT_CRITICAL /* undef for developing */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ +#define CONFIG_LPC2292 +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* this would be 0xAE if E0, E1 and E2 were pulled high */ +#define CFG_I2C_SLAVE 0xA0 +#define CFG_I2C_EEPROM_ADDR (0xA0 >> 1) +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/* not used but required by devices.c */ +#define CFG_I2C_SPEED 10000 + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define SCL 0x00000004 /* P0.2 */ +#define SDA 0x00000008 /* P0.3 */ + +#define I2C_READ ((GET32(IO0PIN) & SDA) ? 1 : 0) +#define I2C_SDA(x) { if (x) PUT32(IO0SET, SDA); else PUT32(IO0CLR, SDA); } +#define I2C_SCL(x) { if (x) PUT32(IO0SET, SCL); else PUT32(IO0CLR, SCL); } +#define I2C_DELAY { udelay(100); } +#define I2C_ACTIVE { unsigned int i2ctmp; \ + i2ctmp = GET32(IO0DIR); \ + i2ctmp |= SDA; \ + PUT32(IO0DIR, i2ctmp); } +#define I2C_TRISTATE { unsigned int i2ctmp; \ + i2ctmp = GET32(IO0DIR); \ + i2ctmp &= ~SDA; \ + PUT32(IO0DIR, i2ctmp); } +#endif /* CONFIG_SOFT_I2C */ + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PING + + +#define CONFIG_DOS_PARTITION + +#define CONFIG_BOOTDELAY 5 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "SMN42 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x81800000 /* memtest works on */ +#define CFG_MEMTEST_END 0x83000000 /* 24 MB in SRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ + /* for uClinux img is here*/ + +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_HZ 2048 /* decrementer freq in Hz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SRAM */ +#define PHYS_SDRAM_1 0x81000000 /* SRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB SRAM */ + +/* This is the external flash */ +#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* + * The first entry in CFG_FLASH_BANKS_LIST is a dummy, but it must be present. + */ +#define CFG_FLASH_BANKS_LIST { 0, PHYS_FLASH_1 } +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2AA +#define CFG_FLASH_ERASE_TOUT 16384 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */ + +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ + +#define CFG_ENV_IS_IN_FLASH 1 +/* The Environment Sector is in the CPU-internal flash */ +#define CFG_FLASH_BASE 0 +#define CFG_ENV_OFFSET 0x3C000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_MMC 1 +/* we use this ethernet chip */ +#define CONFIG_ENC28J60 + +#endif /* __CONFIG_H */ diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index ae4dcc2ccca..395c7a1e7a0 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -59,15 +59,29 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_COMMANDS \ -((CONFIG_CMD_DFL & ~(CFG_CMD_FLASH)) | CFG_CMD_IDE) /* no Flash, but IDE */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE + +#undef CONFIG_CMD_FLASH + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /*----------------------------------------------------------------------*/ #define CONFIG_ETHADDR 00:D0:93:00:01:CB @@ -82,7 +96,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -160,7 +174,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/SX1.h b/include/configs/SX1.h index 6ed98b8fb18..05cef873e5f 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -93,12 +93,26 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (( CONFIG_CMD_DFL | \ - CFG_CMD_I2C ) & \ - ~CFG_CMD_NET) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C + +#undef CONFIG_CMD_NET + + #include <configs/omap1510.h> #define CONFIG_BOOTARGS "mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw" diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index a8454d99fc0..8f2a5ece2c7 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -146,14 +146,26 @@ #define CFG_DISCOVER_PHY -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE + #define CFG_JFFS2_SORT_FRAGMENTS @@ -226,7 +238,7 @@ */ #define CFG_LONGHELP /* undef to save a little memory */ #define CFG_PROMPT "=>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -309,7 +321,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index f4339ecd9c8..5bbe3c5919d 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -80,18 +80,30 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_SDRAM | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP + #define CONFIG_DRAM_SPEED 100 /* MHz */ @@ -384,7 +396,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index d42bd69231e..a08451eb30b 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -51,17 +51,28 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP /* @@ -363,7 +374,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 119bc2442bb..dccdf0ca9b4 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -43,6 +43,10 @@ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_MCFTMR + +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -50,20 +54,34 @@ #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C ) & \ - ~(CFG_CMD_NET)) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C + +#undef CONFIG_CMD_NET + + #define CONFIG_BOOTDELAY 3 #define CFG_PROMPT "=> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 8a6e5a61b73..1c6a9ae4f1b 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -42,11 +42,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -72,12 +67,6 @@ #define CFG_CONSOLE_IS_IN_ENV #endif -#ifdef CONFIG_VIDEO -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -85,7 +74,6 @@ /* USB */ #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE /* POST support */ @@ -94,41 +82,51 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif -/* IDE */ -#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) /* - * Supported commands + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP | \ - CFG_CMD_BSP) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_USB + +#ifdef CONFIG_VIDEO +#define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_POST +#define CONFIG__CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -200,17 +198,17 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) +#if defined(CFG_IPBCLK_EQUALS_XLBCLK) /* * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ -#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif /* @@ -394,7 +392,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -403,6 +401,11 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* Enable an alternate, more extensive memory test */ #define CFG_ALT_MEMTEST @@ -414,8 +417,7 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -432,7 +434,7 @@ #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#ifdef CFG_PCISPEED_66 +#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2 #define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ #else #define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index f41dbd0ccb1..7240ce12835 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -50,11 +50,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -81,12 +76,6 @@ # define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS # define CONFIG_PCI_IO_SIZE 0x01000000 -# define ADD_PCI_CMD CFG_CMD_PCI - -#else /* no Evaluation board */ - -# define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* USB */ @@ -99,49 +88,49 @@ # else # define CONFIG_USB_CONFIG 0x00001000 # endif -# define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT # define CONFIG_DOS_PARTITION # define CONFIG_USB_STORAGE -#else - -# define ADD_USB_CMD 0 - #endif /* IDE */ #if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) - -# define ADD_IDE_CMD CFG_CMD_IDE | CFG_CMD_FAT # define CONFIG_DOS_PARTITION +#endif -#else -# define ADD_IDE_CMD 0 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#endif /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - ADD_IDE_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_BEDBUG \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_REGINFO + +#if defined (CONFIG_EVAL5200) || defined (CONFIG_LITE5200) +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_USB +#define CONFIG_CMD_PCI +#endif + /* * MUST be low boot - HIGHBOOT is not supported anymore @@ -186,7 +175,7 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* * I2C configuration @@ -336,7 +325,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -352,6 +341,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + #ifdef CONFIG_EVAL5200 /* M48T08 is available with the Evaluation board only */ #define CONFIG_RTC_MK48T59 1 /* use M48T08 on EVAL5200 */ #define RTC(reg) (0xf0010000+reg) diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 2344b96811b..66f7a1150d0 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -107,30 +107,28 @@ */ #define CFG_MATCH_PARTIAL_CMD + /* - * List of available monitor commands. Use the system default list - * plus add some of the "non-standard" commands back in. - * See ./cmd_confdefs.h - */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ELF | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_BEDBUG \ - ) + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_BEDBUG + #define CONFIG_AUTOSCRIPT 1 #define CFG_LOADS_BAUD_CHANGE 1 #undef CONFIG_LOADS_ECHO /* NO echo on for serial download */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ @@ -141,7 +139,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -239,7 +237,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif @@ -411,10 +409,11 @@ /* * BOOTP options */ -#undef CONFIG_BOOTP_MASK -#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE \ - ) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE /* diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 7069b35ad60..e0c9d81be08 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -44,14 +44,9 @@ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -105,12 +100,6 @@ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ -#ifdef CONFIG_PCI -#define ADD_PCI_CMD CFG_CMD_PCI -#else -#define ADD_PCI_CMD 0 -#endif - /* * Video console */ @@ -133,11 +122,6 @@ #define CFG_CONSOLE_IS_IN_ENV #endif /* #ifndef CONFIG_TQM5200S */ -#ifdef CONFIG_VIDEO -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 -#endif /* Partitions */ #define CONFIG_MAC_PARTITION @@ -146,11 +130,17 @@ /* USB */ #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) -#define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT +#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CFG_USB_OHCI_SLOT_NAME "mpc5200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #endif #ifndef CONFIG_CAM5200 @@ -161,44 +151,61 @@ #endif #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif -/* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300) -#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) -#else -#define ADD_IDE_CMD 0 -#endif /* - * Supported commands + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP | \ - CFG_CMD_BSP) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_BSP + +#ifdef CONFIG_VIDEO + #define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_PCI +#define CONFIG_CMD_CMD_PCI +#endif + +#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300) + #define CONFIG_CMD_IDE + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif + +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) + #define CONFIG_CFG_USB + #define CONFIG_CFG_FAT +#endif + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -234,15 +241,21 @@ #ifndef CONFIG_CAM5200 #define CUSTOM_ENV_SETTINGS \ "bootfile=/tftpboot/tqm5200/uImage\0" \ + "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0" \ + "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" #else -#define CUSTOM_ENV_SETTINGS \ +#define CUSTOM_ENV_SETTINGS \ "bootfile=cam5200/uImage\0" \ "u-boot=cam5200/u-boot.bin\0" \ "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttyS0\0" \ + "kernel_addr=200000\0" \ + "fdt_addr=400000\0" \ + "hostname=tqm5200\0" \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -252,13 +265,17 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate}\0" \ + "console=${console},${baudrate}\0" \ "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ - "bootm\0" \ + "net_nfs=tftp ${kernel_addr} ${bootfile};" \ + "run nfsargs addip addcons;bootm\0" \ + "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};" \ + "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;" \ + "run nfsargs addip addcons;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ ENV_UPDT \ @@ -269,17 +286,17 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200) +#if defined(CFG_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200) /* * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of + * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ -#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif /* @@ -556,7 +573,12 @@ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -576,8 +598,7 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -594,7 +615,7 @@ #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#ifdef CFG_PCISPEED_66 +#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2 #define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ #else #define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ @@ -676,4 +697,16 @@ /* Interval between registers */ #define CFG_ATA_STRIDE 4 +/*----------------------------------------------------------------------- + * Open firmware flat tree support + *----------------------------------------------------------------------- + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + #endif /* __CONFIG_H */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 247f705fb66..7a3801026fb 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -70,8 +70,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM823L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -88,34 +89,38 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + #ifdef CONFIG_SPLASH_SCREEN -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#else -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + #define CONFIG_CMD_BMP #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -129,7 +134,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -201,6 +206,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -212,7 +219,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 1461b5f2031..e8b6a80b19e 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -70,8 +70,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM823M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -88,23 +89,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -118,7 +130,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -191,6 +203,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -202,7 +216,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index ffd5c0b95ca..3b7832397f2 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -167,8 +167,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. * * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the * X.29 connector, and FCC2 is hardwired to the X.1 connector) @@ -220,17 +219,28 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -244,7 +254,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -385,7 +395,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 925bf343171..50f67524fde 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -97,10 +97,6 @@ /* enable I2C and select the hardware/software driver */ #undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -#define ADD_CMD_I2C CFG_CMD_I2C | \ - CFG_CMD_DATE |\ - CFG_CMD_DTT |\ - CFG_CMD_EEPROM #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F @@ -140,7 +136,6 @@ #else #undef CONFIG_HARD_I2C #undef CONFIG_SOFT_I2C -#define ADD_CMD_I2C 0 #endif /* @@ -177,8 +172,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. * * (On TQM8272 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the * X.29 connector, and FCC2 is hardwired to the X.1 connector) @@ -272,20 +266,37 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_NAND | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - ADD_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP + +#if CONFIG_I2C + #define CONFIG_CMD_I2C + #define CONFIG_CMD_DATE + #define CONFIG_CMD_DTT + #define CONFIG_CMD_EEPROM +#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -301,7 +312,7 @@ #endif #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -392,7 +403,7 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #define CFG_NAND_CS_DIST 0x80 #define CFG_NAND_UPM_WRITE_CMD_OFS 0x20 @@ -430,7 +441,7 @@ WRITE_NAND(d, addr); \ } while(0) -#endif /* CFG_CMD_NAND */ +#endif /* CONFIG_CMD_NAND */ #define CONFIG_PCI #ifdef CONFIG_PCI @@ -502,7 +513,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index ed0357791b4..01472529d04 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -28,9 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define DEBUG -#undef DEBUG - /* * High Level Configuration Options */ @@ -248,14 +245,16 @@ extern int tqm834x_num_flash_banks; #define CONFIG_NET_MULTI #endif -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" @@ -281,7 +280,6 @@ extern int tqm834x_num_flash_banks; #define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE #define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ - #undef CONFIG_EEPRO100 #define CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -316,38 +314,36 @@ extern int tqm834x_num_flash_banks; #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -/* Common commands */ -#define CFG_CMD_TQM8349_COMMON CFG_CMD_DATE | CFG_CMD_I2C | CFG_CMD_DTT\ - | CFG_CMD_PING | CFG_CMD_EEPROM \ - | CFG_CMD_MII | CFG_CMD_JFFS2 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI \ - | CFG_CMD_TQM8349_COMMON) \ - & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_TQM8349_COMMON) \ - & \ - ~(CFG_CMD_ENV | CFG_CMD_LOADS)) -#endif +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#else /* CFG_RAMBOOT */ +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \ - | CFG_CMD_TQM8349_COMMON) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_TQM8349_COMMON) + #define CONFIG_CMD_PCI #endif -#endif /* CFG_RAMBOOT */ - -#include <cmd_confdefs.h> +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS +#endif /* * Miscellaneous configurable options @@ -362,7 +358,7 @@ extern int tqm834x_num_flash_banks; #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -387,7 +383,7 @@ extern int tqm834x_num_flash_banks; */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -495,7 +491,7 @@ extern int tqm834x_num_flash_banks; #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -505,6 +501,7 @@ extern int tqm834x_num_flash_banks; */ #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR D2:DA:5E:44:BC:29 #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 1E:F3:40:21:92:53 diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 90ecbadb2e1..beeca6343e8 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -66,8 +66,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM850L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -80,23 +81,33 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -110,7 +121,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -182,6 +193,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -193,7 +206,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index b3f8f8d835a..d5609c1d485 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -64,8 +64,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM850M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -78,23 +79,33 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -108,7 +119,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -181,6 +192,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -192,7 +205,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 49aaeea44de..e35b5b2ac1e 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM855L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -83,23 +84,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -113,7 +125,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -185,6 +197,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -196,7 +210,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 50df49e93cc..cd5212eff8e 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM855M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -116,24 +117,35 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 5 #endif -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -147,7 +159,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -220,6 +232,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -231,7 +245,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index f45f3a2f5ac..6dbd3924bdd 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -94,7 +94,6 @@ */ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define CONFIG_ADD_RAM_INFO 1 /* print additional info*/ #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) /* TQM8540 & 8560 need DLL-override */ @@ -258,16 +257,20 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 +#define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 @@ -357,24 +360,35 @@ #define CONFIG_TIMESTAMP /* Print image info with ts */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DTT +#define CONFIG_CMD_MII + #if defined(CONFIG_PCI) -# define ADD_PCI_CMD (CFG_CMD_PCI) -#else -# define ADD_PCI_CMD 0 + #define CONFIG_CMD_PCI #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - ADD_PCI_CMD | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DTT | \ - CFG_CMD_MII | \ - CFG_CMD_PING ) -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -385,7 +399,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -406,7 +420,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ #endif @@ -418,7 +432,7 @@ #define BOOTFLAG_COLD 0x01 /* Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -435,7 +449,7 @@ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ - CFG_BOOTFILE \ + "bootfile="CFG_BOOTFILE_PATH"\0" \ "netdev=eth0\0" \ "consdev=ttyS0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 9be5db1e424..d5838dbf372 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM860L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -83,26 +84,37 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#define CONFIG_NETCONSOLE +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CONFIG_NETCONSOLE /* * Miscellaneous configurable options @@ -116,7 +128,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -188,6 +200,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -199,7 +213,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 37f6c985d3a..684b86f2efe 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -69,8 +69,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM860M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -83,24 +84,35 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -114,7 +126,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -187,6 +199,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -198,7 +212,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index f03690a7b21..f09d3d1654f 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -72,8 +72,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM862L/uImage\0" \ - "kernel_addr=40040000\0" \ - "ramdisk_addr=40100000\0" \ + "fdt_addr=40040000\0" \ + "kernel_addr=40060000\0" \ + "ramdisk_addr=40200000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -86,23 +87,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -116,7 +128,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -189,6 +201,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -200,7 +214,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 495934045f9..039aa3af428 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -72,8 +72,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM862M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -86,23 +87,34 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -116,7 +128,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -190,6 +202,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -201,7 +215,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 148490b5863..0d778919a2b 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -81,8 +81,9 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM866M/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40180000\0" \ + "fdt_addr=40080000\0" \ + "kernel_addr=400A0000\0" \ + "ramdisk_addr=40280000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -125,7 +126,15 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 4 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -134,16 +143,19 @@ #define CONFIG_TIMESTAMP /* but print image timestmps */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS + /* * Miscellaneous configurable options @@ -157,7 +169,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -230,6 +242,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -241,7 +255,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index d470ade847d..f36b729cd5e 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -131,7 +131,15 @@ # define CONFIG_RTC_DS1337 1 # define CFG_I2C_RTC_ADDR 0x68 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -140,19 +148,22 @@ #define CONFIG_TIMESTAMP /* but print image timestmps */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + /* * Miscellaneous configurable options @@ -166,7 +177,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -187,8 +198,7 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* - * Enable loopw commando. This has only effect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -258,7 +268,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif @@ -478,7 +488,7 @@ #define CONFIG_ETHER_ON_FEC1 /* ... for FEC1 */ #define CONFIG_ETHER_ON_FEC2 /* ... for FEC2 */ -#if (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CONFIG_CMD_MII) #define CFG_DISCOVER_PHY #endif diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 81757032362..9edf79022dc 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -48,11 +48,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -63,7 +58,6 @@ /* * Video console */ -#if 1 #define CONFIG_VIDEO #define CONFIG_VIDEO_SED13806 #define CONFIG_VIDEO_SED13806_16BPP @@ -76,10 +70,6 @@ #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN -#define ADD_VIDEO_CMD CFG_CMD_BMP -#else -#define ADD_VIDEO_CMD 0 -#endif #ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */ /* @@ -105,12 +95,9 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#define ADD_PCI_CMD CFG_CMD_PCI - #else /* MGT5100 */ #define CONFIG_MII 1 -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ #endif @@ -119,29 +106,36 @@ #define CONFIG_DOS_PARTITION /* USB */ -#if 1 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 -#endif + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_IDE | \ - ADD_VIDEO_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#if defined(CONFIG_MPC5200) + #define CONFIG_CMD_PCI +#endif + +#define CONFIG_CMD_BMP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + #if (TEXT_BASE == 0xFE000000) /* Boot low */ # define CFG_LOWBOOT 1 @@ -183,7 +177,7 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #endif /* @@ -303,7 +297,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -319,6 +313,12 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + /* * Various low-level settings */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 5f48a709381..df6894f3240 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -48,27 +48,33 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - /*CFG_CMD_JFFS2 |*/ \ - /*CFG_CMD_NAND |*/ \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_USB | \ - CFG_CMD_REGINFO | \ - CFG_CMD_FAT | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_BSP) - -/* this must be included after the definiton of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_USB +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FAT +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_BSP + #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " @@ -145,7 +151,7 @@ #define CONFIG_IPADDR 10.0.0.110 #define CONFIG_SERVERIP 10.0.0.1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ @@ -246,7 +252,7 @@ /*----------------------------------------------------------------------- * NAND flash settings */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #define CFG_NAND_LEGACY #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -280,6 +286,6 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_MTD_NAND_ECC_JFFS2 1 -#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 96f3d26cc5e..14848abe5b2 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -58,28 +58,40 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -98,7 +110,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -141,38 +153,18 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_QUIET 1 /*----------------------------------------------------------------------- * PCI stuff @@ -319,7 +311,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index f2f3ea7cc4d..5512f4be21a 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -60,24 +60,33 @@ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ #define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) - -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_BSP | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -96,7 +105,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -244,7 +253,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index 92bade5187e..14057847b82 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -95,8 +95,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC #define CONFIG_ETHER_ON_FCC @@ -138,24 +137,34 @@ #endif -/* configure commands */ -#define CONFIG_COMMANDS ( CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_BDI | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_ECHO | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_IMLS | \ - CFG_CMD_LOADB | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_RUN ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IMLS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + /* * boot options & environment @@ -206,7 +215,7 @@ #define CFG_PROMPT "=> " /* console i/o buffer size */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 #else #define CFG_CBSIZE 256 @@ -305,7 +314,7 @@ /* cache configuration */ #define CFG_CACHELINE_SIZE 32 /* for MPC8260 */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of above */ #endif diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 8dc623ea069..fc177fb1f56 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -70,13 +70,31 @@ #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | CFG_CMD_BEDBUG | CFG_CMD_DATE | CFG_CMD_I2C | \ - CFG_CMD_EEPROM | CFG_CMD_ELF | CFG_CMD_BSP | CFG_CMD_REGINFO) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_BSP +#define CONFIG_CMD_REGINFO #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_HW_WATCHDOG /* HW Watchdog, board specific */ @@ -92,7 +110,7 @@ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -277,7 +295,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */ #endif @@ -309,7 +327,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 2bd98b3af33..20d693fa478 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -75,14 +75,34 @@ #define CFG_DTT_LOW_TEMP -30 #define CFG_DTT_HYSTERESIS 3 -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_IRQ | CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | CFG_CMD_BEDBUG | CFG_CMD_DATE | CFG_CMD_I2C | \ - CFG_CMD_EEPROM | CFG_CMD_ELF | CFG_CMD_BSP | CFG_CMD_REGINFO | \ - CFG_CMD_DTT) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_BSP +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DTT + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_HW_WATCHDOG /* HW Watchdog, board specific */ @@ -98,7 +118,7 @@ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -278,7 +298,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above val. */ #endif @@ -310,7 +330,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index faf855d2492..656784aa0cc 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -60,19 +60,31 @@ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_IRQ | \ - CFG_CMD_ELF | \ - CFG_CMD_NAND | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -92,7 +104,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -133,38 +145,16 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 + +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ + #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ /*----------------------------------------------------------------------- @@ -270,7 +260,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h index 9b32514867a..611f5a62caa 100644 --- a/include/configs/XPEDITE1K.h +++ b/include/configs/XPEDITE1K.h @@ -182,25 +182,33 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */ #define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_DATE | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_DIAG | \ - CFG_CMD_FAT ) - -/* CFG_CMD_DHCP | \ */ -/* CFG_CMD_KGDB | \ */ - - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -209,7 +217,7 @@ extern void out32(unsigned int, unsigned long); */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -238,7 +246,6 @@ extern void out32(unsigned int, unsigned long); #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ @@ -255,7 +262,7 @@ extern void out32(unsigned int, unsigned long); */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 440GX CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -267,7 +274,7 @@ extern void out32(unsigned int, unsigned long); #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h index 37ef1058f90..00c4ff093a6 100644 --- a/include/configs/Yukon8220.h +++ b/include/configs/Yukon8220.h @@ -39,12 +39,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -70,31 +64,40 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #define CONFIG_NET_MULTI #define CONFIG_MII -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Autobooting */ @@ -293,7 +296,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -309,6 +312,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index a5085cfb79d..7c1a5b9e88f 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -55,8 +55,8 @@ * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CFG_CMD_NET must - * be removed from CONFIG_COMMANDS to remove support for networking. + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ @@ -106,22 +106,33 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -139,7 +150,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -223,7 +234,7 @@ #endif #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -248,18 +259,18 @@ #define CFG_LSRT 0x0F #define CFG_MPTPR 0x4000 -#define CFG_PSDRAM_BR CFG_SDRAM_BASE | 0x00000041 +#define CFG_PSDRAM_BR (CFG_SDRAM_BASE | 0x00000041) #define CFG_PSDRAM_OR 0xFC0028C0 -#define CFG_LSDRAM_BR CFG_LSDRAM_BASE | 0x00001861 +#define CFG_LSDRAM_BR (CFG_LSDRAM_BASE | 0x00001861) #define CFG_LSDRAM_OR 0xFF803480 -#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00000801) #define CFG_OR0_PRELIM 0xFFE00856 -#define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801 +#define CFG_BR5_PRELIM (CFG_EEPROM | 0x00000801) #define CFG_OR5_PRELIM 0xFFFF03F6 -#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00001801 +#define CFG_BR6_PRELIM (CFG_FLSIMM_BASE | 0x00001801) #define CFG_OR6_PRELIM 0xFF000856 -#define CFG_BR7_PRELIM CFG_BCSR | 0x00000801 +#define CFG_BR7_PRELIM (CFG_BCSR | 0x00000801) #define CFG_OR7_PRELIM 0xFFFF83F6 #define CFG_RESET_ADDRESS 0xC0000000 diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index f163d003b9a..5ba8d1a7157 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -101,17 +101,29 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #undef CONFIG_ALTIVEC /* undef to disable */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MII /* enable MII commands */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BSP | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_DATE) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_DATE + /* * JFFS2 partitions @@ -131,15 +143,12 @@ #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -349,7 +358,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 35b6a519e32..e3f6e2c8b34 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -34,7 +34,9 @@ #define CONFIG_ACADIA 1 /* Board is Acadia */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_405EZ 1 /* Specifc 405EZ support*/ -#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ +/* Detect Acadia PLL input clock automatically via CPLD bit */ +#define CONFIG_SYS_CLK_FREQ ((in8(CFG_CPLD_BASE + 0) == 0x0c) ? \ + 66666666 : 33333000) #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_F 1 /* Call misc_init_f */ @@ -73,7 +75,7 @@ #define CFG_TEMP_STACK_OCM 1 /* OCM as init ram */ /* On Chip Memory location */ -#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_ADDR 0xf8000000 #define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ #define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ #define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ @@ -107,6 +109,7 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_FLASH_CFI /* The flash is CFI compatible */ #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ @@ -120,6 +123,10 @@ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#else +#define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */ +#endif + #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) @@ -130,6 +137,63 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * RAM (CRAM) *----------------------------------------------------------------------*/ @@ -207,7 +271,11 @@ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ "cp.b ${fileaddr} fffc0000 ${filesize};" \ "setenv filesize;saveenv\0" \ - "upd=run load;run update\0" \ + "upd=run load update\0" \ + "nload=tftp 200000 acadia/u-boot-nand.bin\0" \ + "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \ + "setenv filesize;saveenv\0" \ + "nupd=run nload nupdate\0" \ "kozio=bootm ffc60000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -224,16 +292,6 @@ #define CONFIG_USB_OHCI #define CONFIG_USB_STORAGE -#if 0 /* test-only */ -#define TEST_ONLY_NAND -#endif - -#ifdef TEST_ONLY_NAND -#define CMD_NAND CFG_CMD_NAND -#else -#define CMD_NAND 0 -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -241,27 +299,45 @@ #define CONFIG_SUPPORT_VFAT -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DTT | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CMD_NAND | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_USB + +/* + * No NOR on Acadia when NAND-booting + */ +#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#endif #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -270,7 +346,7 @@ *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -300,7 +376,6 @@ */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#ifdef TEST_ONLY_NAND /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ @@ -308,26 +383,29 @@ #define NAND_MAX_CHIPS 1 #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -#endif /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405EZ CPU */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ #endif /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ -#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ - +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 3 /* Memory Bank 0 (Flash) initialization */ #define CFG_EBC_PB0AP 0x03337200 #define CFG_EBC_PB0CR 0xfe0bc000 +/* Memory Bank 3 (NAND-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x018003c0 +#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) + /* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/ /* Memory Bank 1 (CRAM) initialization */ #define CFG_EBC_PB1AP 0x030400c0 @@ -336,10 +414,24 @@ /* Memory Bank 2 (CRAM) initialization */ #define CFG_EBC_PB2AP 0x030400c0 #define CFG_EBC_PB2CR 0x020bc000 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) -/* Memory Bank 3 (NAND-FLASH) initialization */ -#define CFG_EBC_PB3AP 0x018003c0 -#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) +/* + * When NAND-booting the CRAM EBC setup must be done in sync mode, since the + * NAND-SPL already initialized the CRAM and EBC to sync mode. + */ +/* Memory Bank 1 (CRAM) initialization */ +#define CFG_EBC_PB1AP 0x9C0201C0 +#define CFG_EBC_PB1CR 0x000bc000 + +/* Memory Bank 2 (CRAM) initialization */ +#define CFG_EBC_PB2AP 0x9C0201C0 +#define CFG_EBC_PB2CR 0x020bc000 +#endif /* Memory Bank 4 (CPLD) initialization */ #define CFG_EBC_PB4AP 0x04006000 @@ -351,14 +443,15 @@ * GPIO Setup *----------------------------------------------------------------------*/ #define CFG_GPIO_CRAM_CLK 8 -#define CFG_GPIO_CRAM_WAIT 9 +#define CFG_GPIO_CRAM_WAIT 9 /* GPIO-In */ #define CFG_GPIO_CRAM_ADV 10 -#define CFG_GPIO_CRAM_CRE (32 + 21) +#define CFG_GPIO_CRAM_CRE (32 + 21) /* GPIO-Out */ /*----------------------------------------------------------------------- * Definitions for GPIO_0 setup (PPC405EZ specific) * - * GPIO0[0-3] - External Bus Controller CS_4 - CS_7 Outputs + * GPIO0[0-2] - External Bus Controller CS_4 - CS_6 Outputs + * GPIO0[3] - NAND FLASH Controller CE3 (NFCE3) Output * GPIO0[4] - External Bus Controller Hold Input * GPIO0[5] - External Bus Controller Priority Input * GPIO0[6] - External Bus Controller HLDA Output @@ -374,12 +467,12 @@ * GPIO0[28-30] - Trace Outputs / PWM Inputs * GPIO0[31] - PWM_8 I/O */ -#define CFG_GPIO0_TCR 0xC0000000 -#define CFG_GPIO0_OSRL 0x50000000 -#define CFG_GPIO0_OSRH 0x00000055 -#define CFG_GPIO0_ISR1L 0x00000000 +#define CFG_GPIO0_TCR 0xC0A00000 +#define CFG_GPIO0_OSRL 0x50004400 +#define CFG_GPIO0_OSRH 0x02000055 +#define CFG_GPIO0_ISR1L 0x00001000 #define CFG_GPIO0_ISR1H 0x00000055 -#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TSRL 0x02000000 #define CFG_GPIO0_TSRH 0x00000055 /*----------------------------------------------------------------------- @@ -396,13 +489,13 @@ * GPIO1[16] - SPI_SS_1_N Output * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs */ -#define CFG_GPIO1_OSRH 0x55455555 +#define CFG_GPIO1_TCR 0xFFFF8414 #define CFG_GPIO1_OSRL 0x40000110 -#define CFG_GPIO1_ISR1H 0x00000000 +#define CFG_GPIO1_OSRH 0x55455555 #define CFG_GPIO1_ISR1L 0x15555445 -#define CFG_GPIO1_TSRH 0x00000000 +#define CFG_GPIO1_ISR1H 0x00000000 #define CFG_GPIO1_TSRL 0x00000000 -#define CFG_GPIO1_TCR 0xFFFF8014 +#define CFG_GPIO1_TSRH 0x00000000 /* * Internal Definitions @@ -412,7 +505,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h new file mode 100644 index 00000000000..22eac1b4b95 --- /dev/null +++ b/include/configs/ads5121.h @@ -0,0 +1,401 @@ +/* + * (C) Copyright 2007 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * ADS5121 board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define DEBUG +#undef DEBUG + +/* + * Memory map for the ADS5121 board: + * + * 0x0000_0000 - 0x0FFF_FFFF DDR RAM (256 MB) + * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) + * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) + * 0x8200_0000 - 0x8200_001F CPLD (32 B) + * 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) + */ + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC512X 1 /* MPC512X family */ + +#undef CONFIG_PCI + +#define CFG_MPC512X_CLKIN 66000000 /* in Hz */ + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ + +#define CFG_IMMR 0x80000000 + +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +/* + * DDR Setup - manually set all parameters as there's no SPD etc. + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE + +/* DDR Controller Configuration + * + * SYS_CFG: + * [31:31] MDDRC Soft Reset: Diabled + * [30:30] DRAM CKE pin: Enabled + * [29:29] DRAM CLK: Enabled + * [28:28] Command Mode: Enabled (For initialization only) + * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] + * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] + * [20:19] Read Test: DON'T USE + * [18:18] Self Refresh: Enabled + * [17:17] 16bit Mode: Disabled + * [16:13] Ready Delay: 2 + * [12:12] Half DQS Delay: Disabled + * [11:11] Quarter DQS Delay: Disabled + * [10:08] Write Delay: 2 + * [07:07] Early ODT: Disabled + * [06:06] On DIE Termination: Disabled + * [05:05] FIFO Overflow Clear: DON'T USE here + * [04:04] FIFO Underflow Clear: DON'T USE here + * [03:03] FIFO Overflow Pending: DON'T USE here + * [02:02] FIFO Underlfow Pending: DON'T USE here + * [01:01] FIFO Overlfow Enabled: Enabled + * [00:00] FIFO Underflow Enabled: Enabled + * TIME_CFG0 + * [31:16] DRAM Refresh Time: 0 CSB clocks + * [15:8] DRAM Command Time: 0 CSB clocks + * [07:00] DRAM Precharge Time: 0 CSB clocks + * TIME_CFG1 + * [31:26] DRAM tRFC: + * [25:21] DRAM tWR1: + * [20:17] DRAM tWRT1: + * [16:11] DRAM tDRR: + * [10:05] DRAM tRC: + * [04:00] DRAM tRAS: + * TIME_CFG2 + * [31:28] DRAM tRCD: + * [27:23] DRAM tFAW: + * [22:19] DRAM tRTW1: + * [18:15] DRAM tCCD: + * [14:10] DRAM tRTP: + * [09:05] DRAM tRP: + * [04:00] DRAM tRPA + */ + +#define CFG_MDDRC_SYS_CFG 0xF8604200 +#define CFG_MDDRC_SYS_CFG_RUN 0xE8604200 +#define CFG_MDDRC_SYS_CFG_EN 0x30000000 +#define CFG_MDDRC_TIME_CFG0 0x0000281E +#define CFG_MDDRC_TIME_CFG0_RUN 0x01F4281E +#define CFG_MDDRC_TIME_CFG1 0x54EC1168 +#define CFG_MDDRC_TIME_CFG2 0x35210864 + +#define CFG_MICRON_NOP 0x01380000 +#define CFG_MICRON_PCHG_ALL 0x01100400 +#define CFG_MICRON_MR 0x01000022 +#define CFG_MICRON_EM2 0x01020000 +#define CFG_MICRON_EM3 0x01030000 +#define CFG_MICRON_EN_DLL 0x01010000 +#define CFG_MICRON_RST_DLL 0x01000932 +#define CFG_MICRON_RFSH 0x01080000 +#define CFG_MICRON_INIT_DEV_OP 0x01000832 +#define CFG_MICRON_OCD_DEFAULT 0x01010780 +#define CFG_MICRON_OCD_EXIT 0x01010400 + +/* DDR Priority Manager Configuration */ +#define CFG_MDDRCGRP_PM_CFG1 0x000777AA +#define CFG_MDDRCGRP_PM_CFG2 0x00000055 +#define CFG_MDDRCGRP_HIPRIO_CFG 0x00000000 +#define CFG_MDDRCGRP_LUT0_MU 0x11111117 +#define CFG_MDDRCGRP_LUT0_ML 0x7777777A +#define CFG_MDDRCGRP_LUT1_MU 0x4444EEEE +#define CFG_MDDRCGRP_LUT1_ML 0xEEEEEEEE +#define CFG_MDDRCGRP_LUT2_MU 0x44444444 +#define CFG_MDDRCGRP_LUT2_ML 0x44444444 +#define CFG_MDDRCGRP_LUT3_MU 0x55555555 +#define CFG_MDDRCGRP_LUT3_ML 0x55555558 +#define CFG_MDDRCGRP_LUT4_MU 0x11111111 +#define CFG_MDDRCGRP_LUT4_ML 0x1111117C +#define CFG_MDDRCGRP_LUT0_AU 0x33333377 +#define CFG_MDDRCGRP_LUT0_AL 0x7777EEEE +#define CFG_MDDRCGRP_LUT1_AU 0x11111111 +#define CFG_MDDRCGRP_LUT1_AL 0x11111111 +#define CFG_MDDRCGRP_LUT2_AU 0x11111111 +#define CFG_MDDRCGRP_LUT2_AL 0x11111111 +#define CFG_MDDRCGRP_LUT3_AU 0x11111111 +#define CFG_MDDRCGRP_LUT3_AL 0x11111111 +#define CFG_MDDRCGRP_LUT4_AU 0x11111111 +#define CFG_MDDRCGRP_LUT4_AL 0x11111111 + +/* + * NOR FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 0x04000000 /* max flash size in bytes */ +#define CFG_FLASH_USE_BUFFER_WRITE + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +/* + * CPLD registers area is really only 32 bytes in size, but the smallest possible LP + * window is 64KB + */ +#define CFG_CPLD_BASE 0x82000000 +#define CFG_CPLD_SIZE 0x00010000 /* 64 KB */ + +#define CFG_SRAM_BASE 0x30000000 +#define CFG_SRAM_SIZE 0x00020000 /* 128 KB */ + +#define CFG_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ +#define CFG_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ + +/* Use SRAM for initial stack */ +#define CFG_INIT_RAM_ADDR CFG_SRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END CFG_SRAM_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE /* Start of monitor */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ +#if CONFIG_PSC_CONSOLE != 3 +#error CONFIG_PSC_CONSOLE must be 3 +#endif +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE +#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR +#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE +#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#if 0 +#define CFG_I2C_NOPROBES {{0,0x69}} * Don't probe these addrs */ +#endif + +/* + * Ethernet configuration + */ +#define CONFIG_MPC512x_FEC 1 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_ADDR 0x1 +#define CONFIG_MII 1 /* MII PHY management */ + +#if 0 +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ +#endif + +/* + * Environment + */ +#define CFG_ENV_IS_IN_FLASH 1 +/* This has to be a multiple of the Flash sector size */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + +/* + * Watchdog timeout = CFG_WATCHDOG_VALUE * 65536 / IPS clock. + * For example, when IPS is set to 66MHz and CFG_WATCHDOG_VALUE is set + * to 0xFFFF, watchdog timeouts after about 64s. For details refer + * to chapter 36 of the MPC5121e Reference Manual. + */ +#define CONFIG_WATCHDOG /* enable watchdog */ +#define CFG_WATCHDOG_VALUE 0xFFFF + + /* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#ifdef CONFIG_CMD_KGDB + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#ifdef CONFIG_CMD_KGDB +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CFG_HID2 HID2_HBE + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_HOSTNAME ads5121 +#define CONFIG_BOOTFILE uImage + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "load=tftp 200000 /tftpboot/ads5121/u-boot.bin\0" \ + "update=protect off FFF00000 +${filesize};" \ + "era FFF00000 +${filesize};cp.b 200000 FFF00000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#endif /* __CONFIG_H */ diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h index c4108912a6b..703d3124e6f 100644 --- a/include/configs/adsvix.h +++ b/include/configs/adsvix.h @@ -68,10 +68,28 @@ #define CONFIG_DOS_PARTITION 1 -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_NET) | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_IDE | CFG_CMD_PCMCIA) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PCMCIA + +#undef CONFIG_CMD_NET + #undef CONFIG_SHOW_BOOT_PROGRESS @@ -162,7 +180,7 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ /* #define CONFIG_INITRD_TAG 1 */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/aev.h b/include/configs/aev.h index 8d9f0a16610..5bab793e9cc 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -44,11 +44,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -91,34 +86,42 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - CFG_CMD_PCI | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -166,17 +169,17 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) +#if defined(CFG_IPBCLK_EQUALS_XLBCLK) /* * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ -#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif /* @@ -324,7 +327,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -343,9 +346,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -362,7 +369,7 @@ #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#ifdef CFG_PCISPEED_66 +#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2 #define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ #else #define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 67f62d3dfbe..d88c3ad43b0 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -29,6 +29,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_ALPR 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ @@ -94,7 +95,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -209,25 +210,37 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_FPGA | \ - CFG_CMD_NAND | \ - CFG_CMD_REGINFO) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -236,7 +249,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -256,7 +269,7 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ @@ -274,7 +287,6 @@ #define CONFIG_PCI_BOOTDELAY 1 /* enable pci bootdelay variable*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_MASTER_INIT @@ -358,7 +370,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h index 9a1c5596b7a..73a88854b38 100644 --- a/include/configs/armadillo.h +++ b/include/configs/armadillo.h @@ -71,12 +71,21 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/ +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200" diff --git a/include/configs/assabet.h b/include/configs/assabet.h index 1a69ebe0dae..226ad54723e 100644 --- a/include/configs/assabet.h +++ b/include/configs/assabet.h @@ -66,18 +66,30 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySA0,115200n8 root=/dev/nfs ip=bootp" #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 8fad55d81cf..a65c5f3422f 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -97,18 +97,31 @@ #define CONFIG_BOOTDELAY 3 /* #define CONFIG_ENV_OVERWRITE 1 */ -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | CFG_CMD_MII |\ - CFG_CMD_DHCP ) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_IMI | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC | \ - CFG_CMD_LOADS )) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MII +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_LOADS + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -150,6 +163,11 @@ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_AT91C_USE_RMII +/* AC Characteristics */ +/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ +#define DATAFLASH_TCSS (0xC << 16) +#define DATAFLASH_TCHS (0x1 << 24) + #define CONFIG_HAS_DATAFLASH 1 #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) #define CFG_MAX_DATAFLASH_BANKS 2 diff --git a/include/configs/atc.h b/include/configs/atc.h index bf6c1709d90..3ff4b68083a 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -64,9 +64,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. - * + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ @@ -124,27 +122,37 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_DATE | \ - CFG_CMD_IDE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_DOS_PARTITION +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_DATE +#define CONFIG_CMD_IDE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CONFIG_DOS_PARTITION /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -285,7 +293,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index beaf3851dc8..75b153e4a85 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -108,47 +108,29 @@ #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_NET_MULTI 1 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_SUBNETMASK \ - | CONFIG_BOOTP_GATEWAY) - -#define CONFIG_COMMANDS (CFG_CMD_BDI \ - | CFG_CMD_LOADS \ - | CFG_CMD_LOADB \ - | CFG_CMD_IMI \ - /* | CFG_CMD_CACHE */ \ - | CFG_CMD_FLASH \ - | CFG_CMD_MEMORY \ - | CFG_CMD_NET \ - | CFG_CMD_ENV \ - /* | CFG_CMD_IRQ */ \ - | CFG_CMD_BOOTD \ - | CFG_CMD_CONSOLE \ - /* | CFG_CMD_EEPROM */ \ - | CFG_CMD_ASKENV \ - | CFG_CMD_RUN \ - | CFG_CMD_ECHO \ - /* | CFG_CMD_I2C */ \ - | CFG_CMD_REGINFO \ - /* | CFG_CMD_DATE */ \ - | CFG_CMD_DHCP \ - /* | CFG_CMD_AUTOSCRIPT */ \ - /* | CFG_CMD_MII */ \ - | CFG_CMD_MISC \ - /* | CFG_CMD_SDRAM */ \ - /* | CFG_CMD_DIAG */ \ - /* | CFG_CMD_HWFLOW */ \ - /* | CFG_CMD_SAVES */ \ - /* | CFG_CMD_SPI */ \ - /* | CFG_CMD_PING */ \ - | CFG_CMD_MMC \ - | CFG_CMD_FAT \ - | CFG_CMD_IMLS \ - /* | CFG_CMD_ITEST */ \ - | CFG_CMD_EXT2 \ - | CFG_CMD_JFFS2 \ - ) - -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_REGINFO + +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART 1 #define CONFIG_MACB 1 @@ -201,10 +183,9 @@ #define CFG_LONGHELP 1 #define CFG_MEMTEST_START \ - ({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; }) + ({ gd->bd->bi_dram[0].start; }) #define CFG_MEMTEST_END \ ({ \ - DECLARE_GLOBAL_DATA_PTR; \ gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \ }) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index db58a9fa74a..14c563808bb 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_BAMBOO 1 /* Board is BAMBOO */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -50,7 +51,7 @@ *----------------------------------------------------------------------*/ #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ -#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ #define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ @@ -73,9 +74,9 @@ * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ #define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ -#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CFG_INIT_RAM_END (4 << 10) -#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -104,21 +105,18 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ -#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ +#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ @@ -128,12 +126,12 @@ #define CFG_FLASH_ADDR1 0x2aa #define CFG_FLASH_WORD_SIZE unsigned char -#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */ -#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */ +#define CFG_FLASH_2ND_16BIT_DEV 1 /* bamboo has 8 and 16bit device */ +#define CFG_FLASH_2ND_ADDR 0x87800000 /* bamboo has 8 and 16bit device */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ @@ -141,22 +139,91 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#define CFG_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ -#define CFG_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_CS 1 +#define CFG_MAX_NAND_DEVICE 2 +#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE, CFG_NAND_ADDR + 2 } #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 1 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) +#endif + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------------- */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define CFG_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */ -#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */ +#define CONFIG_PROG_SDRAM_TLB +#undef CFG_DRAM_TEST /*----------------------------------------------------------------------- * I2C @@ -251,45 +318,55 @@ #define USB_2_0_DEVICE #endif /*CONFIG_440EP*/ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_SNTP + #ifdef CONFIG_BAMBOO_NAND -#define _CFG_CMD_NAND CFG_CMD_NAND -#else -#define _CFG_CMD_NAND 0 -#endif /* CONFIG_BAMBOO_NAND */ +#define CONFIG_CMD_NAND +#endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_USB | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - _CFG_CMD_NAND | \ - CFG_CMD_SNTP ) #define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -324,7 +401,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -343,7 +419,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -355,7 +431,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/barco.h b/include/configs/barco.h index 624fa1d6e28..0bb446f7844 100644 --- a/include/configs/barco.h +++ b/include/configs/barco.h @@ -70,22 +70,30 @@ #define CONFIG_BOOTARGS "mem=32M" -/* Add support for a few extra bootp options like: - * - File size - * - DNS + +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_EEPROM | \ - CFG_CMD_PCI ) +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_HUSH_PARSER 1 /* use "hush" command parser */ #define CONFIG_BOOTDELAY 1 @@ -110,7 +118,6 @@ */ #define CONFIG_PCI /* include pci support */ #undef CONFIG_PCI_PNP -#undef CFG_CMD_NET #define PCI_ENET0_IOADDR 0x80000000 #define PCI_ENET0_MEMADDR 0x80000000 @@ -340,7 +347,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index 65dfc815548..6cb6bc4f71c 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -97,19 +97,31 @@ #define CONFIG_LOADS_ECHO 1 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE) -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600" +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_DATE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600" #define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 79a1404a40d..cce6ef79f27 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -240,23 +240,6 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" -#if (CONFIG_DRIVER_SMC91111) -#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE) - -#else -#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE) -#endif #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) #if (CONFIG_DRIVER_SMC91111) @@ -305,20 +288,39 @@ #endif #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE + +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_CMD_PING +#endif + #if (CONFIG_SOFT_I2C) -#define CONFIG_COMMANDS2 CFG_CMD_I2C -#else -#define CONFIG_COMMANDS2 0 -#endif /* CONFIG_SOFT_I2C */ +#define CONFIG_CMD_I2C +#endif #if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) -#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 | CFG_CMD_DHCP) -#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) -#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2) +#define CONFIG_CMD_DHCP #endif -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Console settings @@ -345,7 +347,7 @@ #endif #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -395,7 +397,7 @@ /* Enabled below option for CF support */ /* #define CONFIG_STAMP_CF 1 */ -#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(CONFIG_STAMP_CF) && defined(CONFIG_CMD_IDE) #define CONFIG_MISC_INIT_R 1 #define CONFIG_DOS_PARTITION 1 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index f6755acf694..b9a9e3cb792 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -144,11 +144,8 @@ #endif #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG #define FLASH_START_POST_BLOCK 11 /* Should > = 11 */ #define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ -#else -#define CFG_CMD_POST_DIAG 0 #endif /* CF-CARD IDE-HDD Support */ @@ -159,51 +156,65 @@ #if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE) # define CONFIG_BFIN_IDE 1 -# define ADD_IDE_CMD CFG_CMD_IDE -#else -# define ADD_IDE_CMD 0 #endif /*#define CONFIG_BF537_NAND */ /* Add nand flash support */ -#ifdef CONFIG_BF537_NAND -# define ADD_NAND_CMD CFG_CMD_NAND -#else -# define ADD_NAND_CMD 0 -#endif - #define CONFIG_NETCONSOLE 1 #define CONFIG_NET_MULTI 1 +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE + #if (BFIN_CPU == ADSP_BF534) -#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL & ~CFG_CMD_NET) +#undef CONFIG_CMD_NET #else -#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL | CFG_CMD_PING) +#define CONFIG_CMD_PING +#endif + +#if defined(CONFIG_BFIN_CF_IDE) \ + || defined(CONFIG_BFIN_HDD_IDE) \ + || defined(CONFIG_BFIN_TRUE_IDE) +#define CONFIG_CMD_IDE +#endif + #endif #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) -#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DHCP | \ - ADD_IDE_CMD | \ - ADD_NAND_CMD | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_DATE) -#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) -#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_EEPROM | \ - ADD_IDE_CMD | \ - CFG_CMD_DATE) + +#define CONFIG_CMD_DHCP + +#if defined(CONFIG_POST) +#define CONFIG_CMD_DIAG #endif +#ifdef CONFIG_BF537_NAND +#define CONFIG_CMD_NAND +#endif + +#endif + + #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" #define CONFIG_LOADADDR 0x1000000 @@ -256,9 +267,6 @@ #endif #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) #if (BFIN_CPU == ADSP_BF534) #define CFG_PROMPT "serial_bf534> " /* Monitor Command Prompt */ @@ -277,7 +285,7 @@ #endif #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 8d826faaa0d..29662604f99 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -164,12 +164,6 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" #if (CONFIG_DRIVER_SMC91111) -#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DHCP) #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ @@ -186,20 +180,36 @@ "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ "" #else -#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2) #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ "flashboot=bootm 0x20100000\0" \ "" #endif -#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_JFFS2 + +#if defined(CONFIG_DRIVER_SMC91111) +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#endif + /* * Console settings @@ -208,7 +218,7 @@ #define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 10c48143117..7736a1e32d0 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -137,25 +137,37 @@ #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -166,7 +178,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -219,7 +231,7 @@ #define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */ #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ -#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) +#if defined(CONFIG_CMD_EEPROM) #define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ #define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ #endif @@ -314,7 +326,7 @@ */ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405EP CPU */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -426,7 +438,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h index ae75539c37a..a9a52547756 100644 --- a/include/configs/c2mon.h +++ b/include/configs/c2mon.h @@ -68,7 +68,15 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -77,15 +85,18 @@ #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options @@ -98,7 +109,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -174,7 +185,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 2c160a44891..d577b95e05d 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -38,11 +38,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* @@ -52,21 +47,30 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + /* * MUST be low boot - HIGHBOOT is not supported anymore @@ -111,7 +115,7 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* * Flash configuration, expect one 16 Megabyte Bank at most @@ -181,7 +185,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -199,6 +203,11 @@ #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index 6997c7a6f43..e06735da631 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -61,10 +61,21 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2 @@ -75,7 +86,7 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400" #define CONFIG_CMDLINE_TAG -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 5947c2a3193..ae40b358e95 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -58,10 +58,23 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> -#undef CONFIG_COMMANDS -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NONSTD | CFG_CMD_ENV)) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_ENV + #define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200" diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index e62fc06337b..c1dd33d1d25 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -58,10 +58,23 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> -#undef CONFIG_COMMANDS -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~(CFG_CMD_NONSTD | CFG_CMD_ENV)) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_ENV + #define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTARGS "mem=32M console=ttyAM0,115200" diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h new file mode 100644 index 00000000000..d554348021f --- /dev/null +++ b/include/configs/cm5200.h @@ -0,0 +1,338 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_CM5200 1 /* ... on CM5200 platform */ + +/* + * Supported commands + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */ +/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ + +/* + * POST support + */ +#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C) +#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) +/* List of I2C addresses to be verified by POST */ +#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } + +/* display image timestamps */ +#define CONFIG_TIMESTAMP 1 + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \ + "echo" +#undef CONFIG_BOOTARGS + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.33\0" \ + "serverip=192.168.1.1\0" \ + "gatewayip=192.168.1.1\0" \ + "console=ttyPSC0\0" \ + "u-boot_addr=100000\0" \ + "kernel_addr=200000\0" \ + "kernel_addr_flash=fc0c0000\0" \ + "fdt_addr=400000\0" \ + "fdt_addr_flash=fc0a0000\0" \ + "ramdisk_addr=500000\0" \ + "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ + "u-boot=/tftpboot/cm5200/u-boot.bin\0" \ + "bootfile_fdt=/tftpboot/cm5200/uImage\0" \ + "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \ + "load=tftp ${u-boot_addr} ${u-boot}\0" \ + "update=prot off fc000000 +${filesize}; " \ + "era fc000000 +${filesize}; " \ + "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ + "prot on fc000000 +${filesize}\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off panic=1\0" \ + "flash_flash=run flashargs addinit addip addcons;" \ + "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \ + "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \ + "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \ + "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_flash" + +/* + * Low level configuration + */ + +/* + * Clock configuration + */ +#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ +#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_LOWBOOT 1 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_BOARD_TYPES 1 /* we use board_type */ + +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ + +/* + * Flash configuration + */ +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE 0xfc000000 +/* we need these despite using CFI */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ +#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */ + + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#undef CFG_LOWBOOT +#endif + + +/* + * Chip selects configuration + */ +/* Boot Chipselect */ +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */ +/* use board_early_init_r to enable flash write in CS_BOOT */ +#define CONFIG_BOARD_EARLY_INIT_R + +/* Flash memory addressing */ +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* No burst, dead cycle = 1 for CS0 (Flash) */ +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x00000001 + +/* + * SDRAM configuration + * settings for k4s561632E-xx75, assuming XLB = 132 MHz + */ +#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */ +#define SDRAM_CONTROL 0x514F0000 +#define SDRAM_CONFIG1 0xE2333900 +#define SDRAM_CONFIG2 0x8EE70000 + +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE 1 +#define MTDIDS_DEFAULT "nor0=cm5200-0" +#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \ + "384k(uboot),128k(env)," \ + "128k(redund_env),128k(dtb)," \ + "2m(kernel),27904k(rootfs)," \ + "-(config)" + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ +#define CFG_I2C_SPEED 40000 /* 40 kHz */ +#define CFG_I2C_SLAVE 0x0 +#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ +#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + +/* + * USB configuration + */ +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 +/* Partitions (for USB) */ +#define CONFIG_MAC_PARTITION 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_ISO_PARTITION 1 + +/* + * Invoke our last_stage_init function - needed by fwupdate + */ +#define CONFIG_LAST_STAGE_INIT 1 + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Configuration of redundant environment */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Pin multiplexing configuration + */ + +/* + * CS1/GPIO_WKUP_6: GPIO (default) + * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1 + * IRDA/PSC6: UART + * Ether: Ethernet 100Mbit with MD + * PCI_DIS: PCI controller disabled + * USB: USB + * PSC3: SPI with UART3 + * PSC2: UART + * PSC1: UART + */ +#define CFG_GPS_PORT_CONFIG 0x10559C44 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP 1 /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_ALT_MEMTEST 1 +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ + +#define CONFIG_LOOPW 1 + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#ifdef CONFIG_CMD_KGDB +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Flat Device Tree support + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + +#endif /* __CONFIG_H */ diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 572a70f1200..f32c8c2c66b 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -104,35 +104,44 @@ #define CFG_I2C_EEPROM_ADDR 0x50 #define CFG_I2C_EEPROM_ADDR_LEN 1 #define CFG_I2C_EEPROM_ADDR_OVERFLOW +#else +#define CONFIG_TIMESTAMP #endif /* still about 20 kB free with this defined */ #define CFG_LONGHELP #define CONFIG_BOOTDELAY 1 -#ifdef CONFIG_HARD_I2C -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) & \ - ~(CFG_CMD_FPGA | CFG_CMD_MISC) ) -#else -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) & \ - ~(CFG_CMD_FPGA | CFG_CMD_MISC) ) -#define CONFIG_TIMESTAMP + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC + +#if defined(CONFIG_HARD_I2C) + #define CONFIG_CMD_DATE + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C #endif -#define CFG_LONGHELP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CFG_LONGHELP #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ #define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index e4599192941..a869364c605 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -44,13 +44,35 @@ #define CONFIG_BAUDRATE 57600 -#define CONFIG_COMMANDS (CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | \ - CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ASKENV | \ - CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_ENV | CFG_CMD_RUN | \ - CFG_CMD_IMI) -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_NET /* disabeled - causes compile errors */ + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_IMI + #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -73,7 +95,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -149,8 +171,9 @@ #define CFG_ENV_IS_IN_FLASH 1 #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */ -#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */ +#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */ +#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 9033fa88ed1..104d94ec141 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -65,8 +65,10 @@ * Enable use of Ethernet * --- */ +#define CONFIG_MCFFEC -#define FEC_ENET +/* Enable Dma Timer */ +#define CONFIG_MCFTMR /* --- * Define baudrate for UART1 (console output, tftp, ...) @@ -76,6 +78,8 @@ * --- */ +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -130,16 +134,47 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -/* --- - * Define which commmands should be available at u-boot command prompt - * --- + +/* + * BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | CFG_CMD_PING & ~(CFG_CMD_LOADS | \ -CFG_CMD_LOADB) | CFG_CMD_MII) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_MII + +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* *----------------------------------------------------------------------------- @@ -184,7 +219,7 @@ from which user programs will be started */ #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index aea2e64365a..84d50c71dd5 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -71,8 +71,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #undef CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -88,10 +87,25 @@ #define CONFIG_BAUDRATE 9600 #endif -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL|CFG_CMD_KGDB)&~CFG_CMD_NET) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_KGDB + +#undef CONFIG_CMD_NET + #ifdef DEBUG #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -102,7 +116,7 @@ #define CONFIG_BOOTARGS "root=/dev/ram rw" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #undef CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -124,7 +138,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -256,7 +270,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ #endif diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h index 80962d35fdf..ce38af1dd85 100644 --- a/include/configs/cogent_mpc8xx.h +++ b/include/configs/cogent_mpc8xx.h @@ -59,10 +59,25 @@ #define CFG_I2C_SLAVE 0x7F -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_KGDB | CFG_CMD_I2C) & ~CFG_CMD_NET) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_I2C + +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -73,7 +88,7 @@ #define CONFIG_BOOTARGS "root=/dev/ram rw" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #undef CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #define CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -88,7 +103,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -200,7 +215,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index f9586fbcb94..ce4ea1f8dbe 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -50,11 +50,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -92,12 +87,6 @@ #define CONFIG_NS8382X 1 #endif -#define ADD_PCI_CMD CFG_CMD_PCI - -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -107,28 +96,35 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_IDE | \ - CFG_CMD_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_DATE | \ - ADD_PCI_CMD ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_I2C +#define CONFIG_CMD_BSP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_DATE #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -179,7 +175,7 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #endif /* * I2C configuration @@ -277,7 +273,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -295,6 +291,11 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/cradle.h b/include/configs/cradle.h index 776e1d2b7f7..eb93a8f083f 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -61,10 +61,21 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/mtdblock2 console=ttyS0,115200" diff --git a/include/configs/csb226.h b/include/configs/csb226.h index f04102e95c5..0be0f219248 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -57,10 +57,34 @@ #define CONFIG_BAUDRATE 19200 #undef CONFIG_MISC_INIT_R /* not used yet */ -#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_DHCP|CFG_CMD_CACHE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_ENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_CACHE + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0" @@ -73,7 +97,7 @@ #define CONFIG_CMDLINE_TAG 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 27d64c1e434..c43b49737d9 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -73,30 +73,32 @@ #endif /* - * BOOTP/DHCP protocol configuration - * + * BOOTP options */ -#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_BOOTFILESIZE ) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS2 + + /* - * U-Boot Monitor Command Line Functions Configuration - * + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_PCI | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PCI +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + /* * Serial download configuration @@ -109,7 +111,7 @@ * KGDB Configuration * */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -125,7 +127,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 09d52ded9ee..a7120aa57f9 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -73,30 +73,31 @@ #endif /* - * BOOTP/DHCP protocol configuration - * + * BOOTP options */ -#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_BOOTFILESIZE ) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS2 + + /* - * U-Boot Monitor Command Line Functions Configuration - * + * Command line configuration. */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF | \ - CFG_CMD_IRQ | \ - CFG_CMD_I2C | \ - CFG_CMD_PCI | \ - CFG_CMD_DATE | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PCI +#define CONFIG_CMD_DATE +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP /* * Serial download configuration @@ -109,7 +110,7 @@ * KGDB Configuration * */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -125,7 +126,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index 071d5b7f36c..976dae39f69 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -99,20 +99,32 @@ #define CONFIG_BOOTDELAY 3 /* #define CONFIG_ENV_OVERWRITE 1 */ -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING ) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_IMI | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC | \ - CFG_CMD_LOADS )) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC +#undef CONFIG_CMD_LOADS + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h new file mode 100644 index 00000000000..8ecd0595a20 --- /dev/null +++ b/include/configs/davinci_dvevm.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * Define this to make U-Boot skip low level initialization when loaded + * by initial bootloader. Not required by NAND U-Boot version but IS + * required for a NOR version used to burn the real NOR U-Boot into + * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive + * so it is NOT possible to build a U-Boot with both NAND and NOR routines. + * NOR U-Boot is loaded directly from Flash so it must perform all the + * low level initialization itself. NAND version is loaded by an initial + * bootloader (UBL in TI-ese) that performs such an initialization so it's + * skipped in NAND version. The third DaVinci boot mode loads a bootloader + * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) + * performing low level init prior to loading. All that means we can NOT use + * NAND version to put U-Boot into NOR because it doesn't have NOR support and + * we can NOT use NOR version because it performs low level initialization + * effectively destroying itself in DDR memory. That's why a separate NOR + * version with this define is needed. It is loaded via UART, then one uses + * it to somehow download a proper NOR version built WITHOUT this define to + * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze + * NOR support into the initial bootloader so it won't be needed but DaVinci + * static RAM might be too small for this (I have something like 2Kbytes left + * as of now, without NOR support) so this might've not happened... + * +#define CONFIG_NOR_UART_BOOT + */ + +/*=======*/ +/* Board */ +/*=======*/ +#define DV_EVM +#define CFG_NAND_SMALLPAGE +#define CFG_USE_NOR +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ +#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#ifdef CFG_USE_NAND +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#ifdef CFG_NAND_SMALLPAGE +#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_16K +#else +#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_128K +#endif +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define DEF_BOOTM "" +#elif defined(CFG_USE_NOR) +#ifdef CONFIG_NOR_UART_BOOT +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#else +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#endif +#define CFG_ENV_IS_IN_FLASH +#undef CFG_NO_FLASH +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ +#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3) +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#endif +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#ifdef CFG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#elif defined(CFG_USE_NOR) +#define CONFIG_CMD_JFFS2 +#else +#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!" +#endif +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h new file mode 100644 index 00000000000..96c9a301478 --- /dev/null +++ b/include/configs/davinci_schmoogie.h @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/*=======*/ +/* Board */ +/*=======*/ +#define SCHMOOGIE +#define CFG_NAND_LARGEPAGE +#define CFG_USE_NAND +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ +#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_OVERWRITE_ETHADDR_ONCE +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_128K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +/*=====================*/ +/* Board related stuff */ +/*=====================*/ +#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */ +#define CFG_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */ +#define CONFIG_HAS_UID +#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */ +#define CFG_UID_ADDR 0x50 /* UID chip I2C address */ +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NAND +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h new file mode 100644 index 00000000000..de8c4fac2b0 --- /dev/null +++ b/include/configs/davinci_sonata.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * Define this to make U-Boot skip low level initialization when loaded + * by initial bootloader. Not required by NAND U-Boot version but IS + * required for a NOR version used to burn the real NOR U-Boot into + * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive + * so it is NOT possible to build a U-Boot with both NAND and NOR routines. + * NOR U-Boot is loaded directly from Flash so it must perform all the + * low level initialization itself. NAND version is loaded by an initial + * bootloader (UBL in TI-ese) that performs such an initialization so it's + * skipped in NAND version. The third DaVinci boot mode loads a bootloader + * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) + * performing low level init prior to loading. All that means we can NOT use + * NAND version to put U-Boot into NOR because it doesn't have NOR support and + * we can NOT use NOR version because it performs low level initialization + * effectively destroying itself in DDR memory. That's why a separate NOR + * version with this define is needed. It is loaded via UART, then one uses + * it to somehow download a proper NOR version built WITHOUT this define to + * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze + * NOR support into the initial bootloader so it won't be needed but DaVinci + * static RAM might be too small for this (I have something like 2Kbytes left + * as of now, without NOR support) so this might've not happened... + * +#define CONFIG_NOR_UART_BOOT + */ + +/*=======*/ +/* Board */ +/*=======*/ +#define SONATA_BOARD +#define CFG_NAND_SMALLPAGE +#define CFG_USE_NOR +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ +#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ +#define CFG_HZ 1000 +/*====================================================*/ +/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ +/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ +/*====================================================*/ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/*=============*/ +/* Memory Info */ +/*=============*/ +#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ +#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ +#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ +#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ +#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ +#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/*===================*/ +/* I2C Configuration */ +/*===================*/ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ +#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ +/*==================================*/ +/* Network & Ethernet Configuration */ +/*==================================*/ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#ifdef CFG_USE_NAND +#undef CFG_ENV_IS_IN_FLASH +#define CFG_NO_FLASH +#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */ +#define CFG_ENV_SIZE SZ_16K +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CFG_NAND_BASE 0x02000000 +#define CFG_NAND_HW_ECC +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define DEF_BOOTM "" +#elif defined(CFG_USE_NOR) +#ifdef CONFIG_NOR_UART_BOOT +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#else +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT +#endif +#define CFG_ENV_IS_IN_FLASH +#undef CFG_NO_FLASH +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */ +#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2) +#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ +#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ +#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ +#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) +#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ +#endif +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CFG_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +/*===================*/ +/* Linux Information */ +/*===================*/ +#define LINUX_BOOT_PARAM_ADDR 0x80000100 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000" +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#ifdef CFG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#elif defined(CFG_USE_NOR) +#define CONFIG_CMD_JFFS2 +#else +#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!" +#endif +/*=======================*/ +/* KGDB support (if any) */ +/*=======================*/ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 4cc5085293b..b2f606f498b 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -75,21 +75,57 @@ #ifdef CONFIG_DBAU1550 /* Boot from flash by default, revert to bootp */ #define CONFIG_BOOTCOMMAND "bootm 0xbfc20000; bootp; bootm" - -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_NET) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FPGA | CFG_CMD_IDE | \ - CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \ - CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C)) #else /* CONFIG_DBAU1550 */ #define CONFIG_BOOTCOMMAND "bootp;bootm" - -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ - CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | \ - CFG_CMD_ELF | CFG_CMD_BDI | CFG_CMD_BEDBUG)) #endif /* CONFIG_DBAU1550 */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_RUN + + +#ifdef CONFIG_DBAU1550 + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_NET + +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_PCMCIA + +#else + +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +#endif + /* * Miscellaneous configurable options diff --git a/include/configs/debris.h b/include/configs/debris.h index 8ff963f55a2..7667e5e60e3 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -122,23 +122,35 @@ #define CONFIG_BAUDRATE 9600 #define CONFIG_DRAM_SPEED 100 /* MHz */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGBD | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SAVES | \ - CFG_CMD_SDRAM) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_KGBD +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM /* @@ -435,7 +447,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/delta.h b/include/configs/delta.h index 15681208b62..09667edaa5a 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -87,22 +87,49 @@ #define CONFIG_BAUDRATE 115200 -/* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifdef TURN_ON_ETHERNET -# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) + +#define CONFIG_CMD_PING + #else -# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_ENV \ - | CFG_CMD_NAND \ - | CFG_CMD_I2C) \ - & ~(CFG_CMD_NET \ - | CFG_CMD_FLASH \ - | CFG_CMD_IMLS)) + +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C + +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + #endif +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE +#define CFG_USB_OHCI_SLOT_NAME "delta" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ #define CONFIG_BOOTDELAY -1 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -114,7 +141,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_TIMESTAMP -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index 9ac2856f653..d32e0460234 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -66,10 +66,21 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" @@ -80,7 +91,7 @@ #define CONFIG_BOOTFILE "dnp1110" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index a014c7c07f8..f8e2c885b06 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -58,17 +58,27 @@ /*#define CONFIG_DRAM_SPEED 66 */ /* MHz */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_FLASH | \ - CFG_CMD_SDRAM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_ENV | \ - CFG_CMD_PCI ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ENV +#define CONFIG_CMD_PCI /*----------------------------------------------------------------------- @@ -398,7 +408,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ebony.h b/include/configs/ebony.h index a42319b097d..2c626a03288 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_EBONY 1 /* Board is ebony */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -121,7 +122,7 @@ #define CFG_FLASH_WORD_SIZE unsigned char #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ @@ -207,26 +208,38 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -235,7 +248,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -269,7 +282,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ @@ -286,7 +298,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -298,7 +310,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index bdda6292ed7..f5cf477a313 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -62,12 +62,23 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_JFFS2) +#define CONFIG_CMD_JFFS2 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600" @@ -78,7 +89,7 @@ /*#define CONFIG_BOOTFILE "impa7" */ #define CONFIG_BOOTCOMMAND "bootp;bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index 04147a55d1d..85ad70a0d50 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -60,8 +60,8 @@ * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CFG_CMD_NET must - * be removed from CONFIG_COMMANDS to remove support for networking. + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ @@ -123,23 +123,34 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ - | CFG_CMD_I2C \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm FF860000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -157,7 +168,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -183,20 +194,20 @@ #define CFG_DIRECT_FLASH_TFTP -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS #define CFG_JFFS2_FIRST_SECTOR 0 #define CFG_JFFS2_LAST_SECTOR 62 #define CFG_JFFS2_SORT_FRAGMENTS #define CFG_JFFS_CUSTOM_PART -#endif /* CFG_CMD_JFFS2 */ +#endif -#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) #define CONFIG_HARD_I2C 1 /* To enable I2C support */ #define CFG_I2C_SPEED 100000 /* I2C speed */ #define CFG_I2C_SLAVE 0x7F /* I2C slave address */ -#endif /* CFG_CMD_I2C */ +#endif #define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) @@ -240,7 +251,7 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 68625193091..025c24960d2 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -183,8 +183,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */ @@ -291,37 +290,49 @@ #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " -/* What U-Boot subsytems do you want enabled? */ + /* -*/ -#define CONFIG_COMMANDS ( CFG_CMD_ALL & \ - ~( CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DCR | \ - CFG_CMD_DHCP | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_KGDB | \ - CFG_CMD_MII | \ - CFG_CMD_MMC | \ - CFG_CMD_NAND | \ - CFG_CMD_PCI | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_UNIVERSE| \ - CFG_CMD_USB | \ - CFG_CMD_VFD | \ - CFG_CMD_XIMG ) ) + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_BSP +#undef CONFIG_CMD_DCR +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_KGDB +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG /* Where do the internal registers live? */ @@ -342,13 +353,10 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -496,7 +504,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index a77ccef63b9..4febd322a4f 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -60,8 +60,8 @@ * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CFG_CMD_NET must - * be removed from CONFIG_COMMANDS to remove support for networking. + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ @@ -108,22 +108,34 @@ #define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ - | CFG_CMD_I2C \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - | CFG_CMD_DATE \ - | CFG_CMD_DTT \ - | CFG_CMD_EEPROM \ - | CFG_CMD_PCI \ - | CFG_CMD_DIAG \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_DIAG + #define CONFIG_ETHADDR 00:10:EC:00:88:65 #define CONFIG_HAS_ETH1 @@ -138,7 +150,7 @@ #define CONFIG_AUTO_COMPLETE 1 #define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -156,7 +168,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -308,20 +320,20 @@ #define CFG_DIRECT_FLASH_TFTP -#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +#if defined(CONFIG_CMD_JFFS2) #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS #define CFG_JFFS2_FIRST_SECTOR 0 #define CFG_JFFS2_LAST_SECTOR 62 #define CFG_JFFS2_SORT_FRAGMENTS #define CFG_JFFS_CUSTOM_PART -#endif /* CFG_CMD_JFFS2 */ +#endif -#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) #define CONFIG_HARD_I2C 1 /* To enable I2C support */ #define CFG_I2C_SPEED 100000 /* I2C speed */ #define CFG_I2C_SLAVE 0x7F /* I2C slave address */ -#endif /* CFG_CMD_I2C */ +#endif #define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) @@ -358,7 +370,7 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h index 88c2c7437d0..66500c21e02 100644 --- a/include/configs/evb4510.h +++ b/include/configs/evb4510.h @@ -72,12 +72,23 @@ #define CONFIG_BAUDRATE 19200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) +#define CONFIG_CMD_PING -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_ETHADDR 00:40:95:36:35:33 #define CONFIG_NETMASK 255.255.255.0 @@ -89,7 +100,7 @@ #define CONFIG_BOOTCOMMAND "tftp 100000 uImage" /* #define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index b68a2dca09c..e11ce4c715e 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -79,18 +79,30 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m@0(zImage),3m@1m(ramdisk.gz),12m@4m(userfs) root=/dev/nfs ip=bootp" #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/gth2.h b/include/configs/gth2.h index a49ed3bae3e..c2a50c1f473 100644 --- a/include/configs/gth2.h +++ b/include/configs/gth2.h @@ -71,12 +71,37 @@ /* Boot from Compact flash partition 2 as default */ #define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm" -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ - CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \ - CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT )) -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_AUTOSCRIPT + /* * Miscellaneous configurable options diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 4f83b1945d3..ff5724082d0 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -194,8 +194,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC @@ -286,13 +285,16 @@ #undef CONFIG_AUTOBOOT_DELAY_STR #define DEBUG_BOOTKEYS 0 -/* Add support for a few extra bootp options like: - * - File size - * - DNS +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS /* undef this to save memory */ #define CFG_LONGHELP @@ -300,14 +302,21 @@ /* Monitor Command Prompt */ #define CFG_PROMPT "=> " -/* What U-Boot subsytems do you want enabled? */ -#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MII) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII + +#undef CONFIG_CMD_KGDB + /* Where do the internal registers live? */ #define CFG_IMMR 0xf0000000 @@ -331,13 +340,10 @@ #define CONFIG_GW8260 1 /* on an GW8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -473,7 +479,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h new file mode 100644 index 00000000000..577f459e29e --- /dev/null +++ b/include/configs/hcu4.h @@ -0,0 +1,348 @@ +/* + *(C) Copyright 2005-2007 Netstal Maschinen AG + * Niklaus Giger (Niklaus.Giger@netstal.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * hcu4.h - configuration for HCU4 board (similar to hcu5.h) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_HCU4 1 /* Board is HCU4 */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405GPr 1 /* HCU4 has a 405GPr */ +#define CONFIG_405GP 1 +#define CONFIG_4xx 1 + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) +*----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + + +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE + +/* ... with on-chip memory here (4KBytes) */ +#define CFG_OCM_DATA_ADDR 0xF4000000 +#define CFG_OCM_DATA_SIZE 0x00001000 +/* Do not set up locked dcache as init ram. */ +#undef CFG_INIT_DCACHE_CS + +/* Use the On-Chip-Memory (OCM) as a temporary stack for the startup code. */ +#define CFG_TEMP_STACK_OCM 1 + +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +/* + * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CFG_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CONFIG_SERIAL_MULTI /* needed to be able to define + CONFIG_SERIAL_SOFTWARE_FIFO */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CFG_BASE_BAUD 691200 + +/* Size (bytes) of interrupt driven serial port buffer. + * Set to 0 to use polling instead of interrupts. + * Setting to 0 will also disable RTS/CTS handshaking. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO + +/* Set console baudrate to 9600 */ +#define CONFIG_BAUDRATE 9600 + + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ + +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_NOWHERE + +#ifdef CFG_ENV_IS_IN_EEPROM +/* Put the environment after the SDRAM configuration */ +#define PROM_SIZE 2048 +#define CFG_ENV_OFFSET 512 +#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET) +#endif + +#ifdef CFG_ENV_IS_IN_FLASH +/* Put the environment in Flash */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the + * the first internal I2C controller of the PPC440EPx + *----------------------------------------------------------------------*/ +#define CFG_SPD_BUS_NUM 0 + +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* This is the 7bit address of the device, not including P. */ +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 + +/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#undef CFG_I2C_MULTI_EEPROMS + + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +/* Setup some board specific values for the default environment variables */ +#define CONFIG_HOSTNAME hcu4 +#define CONFIG_IPADDR 172.25.1.42 +#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SERVERIP 172.25.1.3 + +#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=0x01000000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/home/diagnose/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/hcu4/uImage\0" \ + "load=tftp 100000 hcu4/u-boot.bin\0" \ + "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \ + "cp.b 100000 FFFa0000 60000\0" \ + "upd=run load;run update\0" \ + "vx=tftp ${loadaddr} hcu4_vx_rom;" \ + "setenv bootargs emac(0,0)hcu4_vx_rom e=${ipaddr} " \ + " h=${serverip} u=dpu pw=netstal8752 tn=hcu4 f=0x3008;" \ + "bootvx ${loadaddr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run vx" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 1 /* PHY address */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +/* SPD EEPROM (sdram speed config) disabled */ +#define CONFIG_SPD_EEPROM 1 +#define SPD_EEPROM_ADDRESS 0x50 + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash Bank 0) initialization */ +#define CFG_EBC_PB0AP 0x02005400 +#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */ + +#define CFG_EBC_PB1AP 0x03041200 +#define CFG_EBC_PB1CR 0x7009A000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB2AP 0x02054500 +#define CFG_EBC_PB2CR 0x78018000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB3AP 0x01840300 +#define CFG_EBC_PB3CR 0x7c0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_EBC_PB4AP 0x01800300 +#define CFG_EBC_PB4CR 0x7e0ba000 /* BAS=,BS=MB,BU=R/W,BW=bit */ + +#define CFG_GPIO0_TCR 0x7ffe0000 /* GPIO value */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/* Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ + + +/* Configuration Port location */ +#define CONFIG_PORT_ADDR 0xF0000500 + + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405GPr CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_HUSH_PARSER /* use "hush" command parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h new file mode 100644 index 00000000000..90858819b67 --- /dev/null +++ b/include/configs/hcu5.h @@ -0,0 +1,391 @@ +/* + * (C) Copyright 2007 Netstal Maschinen AG + * Niklaus Giger (Niklaus.Giger@netstal.com) + * + * (C) Copyright 2006-2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * hcu5.h - configuration for HCU5 board (derived from sequoia.h) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_HCU5 1 /* Board is HCU5 */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xfff00000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff80000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CONFIG_BAUDRATE 9600 +#undef CONFIG_SERIAL_MULTI /* needed to be able to define + CONFIG_SERIAL_SOFTWARE_FIFO, but + CONFIG_SERIAL_SOFTWARE_FIFO (16) does not work */ +/* Size (bytes) of interrupt driven serial port buffer. + * Set to 0 to use polling instead of interrupts. + * Setting to 0 will also disable RTS/CTS handshaking. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ + +#undef CFG_ENV_IS_IN_NVRAM +#undef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_IS_IN_EEPROM +#undef CFG_ENV_IS_NOWHERE + +#ifdef CFG_ENV_IS_IN_EEPROM +/* Put the environment after the SDRAM and bootstrap configuration */ +#define PROM_SIZE 2048 +#define CFG_BOOSTRAP_OPTION_OFFSET 512 +#define CFG_ENV_OFFSET (CFG_BOOSTRAP_OPTION_OFFSET + 0x10) +#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET) +#endif + +#ifdef CFG_ENV_IS_IN_FLASH +/* Put the environment in Flash */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (128) /* 128 MB or 256 MB */ +#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ +#undef CONFIG_DDR_DATA_EYE /* Do not use DDR2 optimization */ +#define CONFIG_DDR_ECC 1 /* enable ECC */ + +/*----------------------------------------------------------------------- + * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the + * the second internal I2C controller of the PPC440EPx + *----------------------------------------------------------------------*/ +#define CFG_SPD_BUS_NUM 1 + +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* This is the 7bit address of the device, not including P. */ +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 + +/* The EEPROM can do 16byte ( 1 << 4 ) page writes. */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#undef CFG_I2C_MULTI_EEPROMS + + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run nfs\" to mount Linux root filesystem over NFS;"\ + "echo" + +#undef CONFIG_BOOTARGS + +/* Setup some board specific values for the default environment variables */ +#define CONFIG_HOSTNAME hcu5 +#define CONFIG_IPADDR 172.25.1.42 +#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SERVERIP 172.25.1.3 + +#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=0x01000000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "bootfile=hcu5/uImage\0" \ + "rootpath=/home/hcu/eldk/ppc_4xxFP\0" \ + "load=tftp 100000 hcu5/u-boot.bin\0" \ + "update=protect off FFFa0000 FFFFFFFF;era FFFa0000 FFFFFFFF;" \ + "cp.b 100000 FFFa0000 60000\0" \ + "upd=run load;run update\0" \ + "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom;" \ + "setenv bootargs emac(0,0)hcu5_vx_rom e=${ipaddr} " \ + " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008;" \ + "bootvx ${loadaddr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run vx" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_M88E1111_PHY 1 +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_USB + +#define CONFIG_SUPPORT_VFAT + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_CS_1 0xC8000000 /* CAN */ +#define CFG_CS_2 0xCC000000 /* CPLD and IMC-Bus Standard */ +#define CFG_CPLD CFG_CS_2 +#define CFG_CS_3 0xCD000000 /* CPLD and IMC-Bus Fast */ + +/*----------------------------------------------------------------------- + * FLASH organization + * Memory Bank 0 (BOOT-FLASH) initialization + */ +#define CFG_BOOTFLASH_CS 0 /* Boot Flash chip connected to CSx */ +#define CFG_EBC_PB0AP 0x02005400 +#define CFG_EBC_PB0CR 0xFFF18000 /* (CFG_FLASH | 0xda000) */ +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ + + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/* Memory Bank 1 CAN-Chips initialization */ +#define CFG_EBC_PB1AP 0x02054500 +#define CFG_EBC_PB1CR 0xC8018000 + +/* Memory Bank 2 CPLD/IMC-Bus standard initialization */ +#define CFG_EBC_PB2AP 0x01840300 +#define CFG_EBC_PB2CR 0xCC0BA000 + +/* Memory Bank 3 IMC-Bus fast mode initialization */ +#define CFG_EBC_PB3AP 0x01800300 +#define CFG_EBC_PB3CR 0xCE0BA000 + +/* Memory Bank 4 (not used) initialization */ +#undef CFG_EBC_PB4AP +#undef CFG_EBC_PB4CR + +/* Memory Bank 5 (not used) initialization */ +#undef CFG_EBC_PB5AP +#undef CFG_EBC_PB5CR + +#define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 ) +#define HCU_HW_VERSION_REGISTER ( CFG_CPLD + 0x1400000 ) + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_HUSH_PARSER /* use "hush" command parser */ +#ifdef CFG_HUSH_PARSER + #define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/hermes.h b/include/configs/hermes.h index 91117bab726..e3a2ed28034 100644 --- a/include/configs/hermes.h +++ b/include/configs/hermes.h @@ -64,23 +64,28 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_COMMANDS CONFIG_CMD_DFL -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -/*----------------------------------------------------------------------*/ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -157,7 +162,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 095b5f6dc27..6c15b4e14c0 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -38,11 +38,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* @@ -55,22 +50,31 @@ /* Partitions */ #define CONFIG_DOS_PARTITION + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP + #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -110,7 +114,7 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* * I2C configuration @@ -222,7 +226,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -231,6 +235,11 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* Enable an alternate, more extensive memory test */ #define CFG_ALT_MEMTEST @@ -242,8 +251,7 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 8cad98dbd29..2547afb3cf0 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -69,8 +69,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ @@ -174,32 +173,44 @@ #define CONFIG_LAST_STAGE_INIT -#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ - CFG_CMD_BEDBUG | \ - CFG_CMD_BMP | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DOC | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FDC | \ - CFG_CMD_FDOS | \ - CFG_CMD_FPGA | \ - CFG_CMD_HWFLOW | \ - CFG_CMD_IDE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NAND | \ - CFG_CMD_MMC | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_PCI | \ - CFG_CMD_USB | \ - CFG_CMD_REISER | \ - CFG_CMD_SCSI | \ - CFG_CMD_SPI | \ - CFG_CMD_UNIVERSE| \ - CFG_CMD_VFD | \ - CFG_CMD_XIMG ) ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_all.h> + +#undef CONFIG_CMD_BEDBUG +#undef CONFIG_CMD_BMP +#undef CONFIG_CMD_DISPLAY +#undef CONFIG_CMD_DOC +#undef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_FDC +#undef CONFIG_CMD_FDOS +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_HWFLOW +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_MFSL +#undef CONFIG_CMD_MMC +#undef CONFIG_CMD_PCMCIA +#undef CONFIG_CMD_PCI +#undef CONFIG_CMD_USB +#undef CONFIG_CMD_REISER +#undef CONFIG_CMD_SCSI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_UNIVERSE +#undef CONFIG_CMD_VFD +#undef CONFIG_CMD_XIMG + #ifdef DEBUG #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ @@ -218,7 +229,7 @@ #define DEBUG_BOOTKEYS 0 #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ @@ -247,7 +258,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -395,12 +406,13 @@ #define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */ #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ /*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ #endif diff --git a/include/configs/idmr.h b/include/configs/idmr.h index b1dbe2ccb94..3821ebcf0d1 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -44,6 +44,8 @@ */ #define CONFIG_BOOTCOMMAND "run net_nfs" #define CONFIG_BOOTDELAY 5 +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_ETHADDR 00:06:3b:01:41:55 @@ -58,6 +60,8 @@ #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root " \ "filesystem over NFS; echo" +#define CONFIG_MCFTMR + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -78,18 +82,27 @@ "u-boot=/tftpboot/idmr/u-boot.bin\0" \ "" + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Commands' definition + * Command line configuration. */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NET) & \ - ~(CFG_CMD_LOADS | \ - CFG_CMD_LOADB)) +#include <config_cmd_default.h> -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_CMD_PING +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NET + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB /* @@ -112,14 +125,16 @@ #define CFG_ENV_IS_IN_FLASH #endif /* !CONFIG_MONITOR_IS_IN_RAM */ +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + #define CFG_PROMPT "=> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else /* !(CONFIG_COMMANDS & CFG_CMD_KGDB) */ +#else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif /* (CONFIG_COMMANDS & CFG_CMD_KGDB) */ +#endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ @@ -138,11 +153,27 @@ /* * Ethernet */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 -#define CFG_ENET_BD_BASE 0x480000 -#define CFG_DISCOVER_PHY 1 +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* * Definitions for initial stack pointer and data area (in DPRAM) @@ -177,7 +208,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /* FLASH organization */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -206,8 +237,8 @@ "2m(rootfs)," \ "-(user)"; -#if (CONFIG_COMMANDS & CFG_CMD_MII) -#error MII commands don't work on iDMR board and sholud not be enabled. -#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */ +#if defined(CONFIG_CMD_MII) +#error "MII commands don't work on iDMR board and should not be enabled." +#endif #endif /* _IDMR_H */ diff --git a/include/configs/impa7.h b/include/configs/impa7.h index 8b841ff546f..0e52ffe0a29 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -61,12 +61,23 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_JFFS2) +#define CONFIG_CMD_JFFS2 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600" @@ -77,7 +88,7 @@ /*#define CONFIG_BOOTFILE "impa7" */ #define CONFIG_BOOTCOMMAND "bootp;bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/incaip.h b/include/configs/incaip.h index 1c6216be843..4caf54efd31 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -81,15 +81,29 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_SNTP ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP + /* * Miscellaneous configurable options diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 773d5d2c1d9..0fac28fadd7 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -40,11 +40,6 @@ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -76,21 +71,30 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -147,7 +151,7 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* * Flash configuration @@ -239,7 +243,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -248,6 +252,11 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* Enable an alternate, more extensive memory test */ #define CFG_ALT_MEMTEST @@ -259,8 +268,7 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 3cb9ebc454c..5310e0d428f 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -54,10 +54,34 @@ #define CONFIG_BAUDRATE 19200 #define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */ -#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP|CFG_CMD_CACHE) -/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMI +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_RUN + #define CONFIG_BOOTDELAY 3 /* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 2f6e3993be4..1452bf2c467 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -66,15 +66,26 @@ #define CFG_SERIAL0 0x16000000 #define CFG_SERIAL1 0x17000000 -/*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */ /*#define CONFIG_NET_MULTI */ -/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ -#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_IMI +#define CONFIG_CMD_BDI +#define CONFIG_CMD_MEMORY -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty" diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 4189f9c995c..69310d4dfbc 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -70,17 +70,28 @@ #define CFG_SERIAL0 0x16000000 #define CFG_SERIAL1 0x17000000 + /* -#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_PCI) -*/ -#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | \ - CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV \ - ) + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + #if 0 #define CONFIG_BOOTDELAY 2 diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index 9f9fdb25e2c..bc5f9e19bdc 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -53,14 +53,28 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF | CFG_CMD_PCI) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PCI + #define CONFIG_PCI #define CONFIG_NET_MULTI #define CONFIG_EEPRO100 -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -/* These are u-boot generic parameters */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 /*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b*/ @@ -71,7 +85,7 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" #define CONFIG_CMDLINE_TAG -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h index af4ecf621a3..da59230bb65 100644 --- a/include/configs/ixdpg425.h +++ b/include/configs/ixdpg425.h @@ -75,16 +75,27 @@ #define CONFIG_BAUDRATE 115200 #define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_NET | \ - CFG_CMD_MII | \ - CFG_CMD_PING) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -/* These are u-boot generic parameters */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 5b97526fc49..b7100e986cd 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -41,11 +41,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -71,7 +66,6 @@ #define CONFIG_PCI_IO_BUS 0x50000000 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 -#define ADD_PCI_CMD CFG_CMD_PCI #endif #define CFG_XLB_PIPELINING 1 @@ -87,15 +81,28 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP) +#include <config_cmd_default.h> + +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_PCI) +#define CODFIG_CMD_PCI +#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Autobooting @@ -138,12 +145,9 @@ #if 0 /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,5200@0" #define OF_SOC "soc5200@f0000000" #define OF_TBCLK (bd->bi_busfreq / 8) @@ -254,7 +258,7 @@ #ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -271,6 +275,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index cc47a168ed3..7908e5a4743 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -42,7 +42,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS /*----------------------------------------------------------------------- @@ -67,11 +66,11 @@ #define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ #define CFG_PCIE0_CFGBASE 0xc0000000 -#define CFG_PCIE0_XCFGBASE 0xc0000400 -#define CFG_PCIE1_CFGBASE 0xc0001000 -#define CFG_PCIE1_XCFGBASE 0xc0001400 -#define CFG_PCIE2_CFGBASE 0xc0002000 -#define CFG_PCIE2_XCFGBASE 0xc0002400 +#define CFG_PCIE1_CFGBASE 0xc1000000 +#define CFG_PCIE2_CFGBASE 0xc2000000 +#define CFG_PCIE0_XCFGBASE 0xc3000000 +#define CFG_PCIE1_XCFGBASE 0xc3001000 +#define CFG_PCIE2_XCFGBASE 0xc3002000 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE @@ -202,6 +201,7 @@ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ "kozio=bootm ffc60000\0" \ + "pciconfighost=1\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -210,28 +210,40 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_DTT | \ - CFG_CMD_ELF | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + #define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */ #define CONFIG_MII 1 /* MII PHY management */ @@ -254,7 +266,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -311,10 +323,9 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#undef CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #undef CFG_PCI_MASTER_INIT @@ -421,7 +432,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -433,7 +444,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index 6590f6f5f0d..75d9c3b3b46 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -78,17 +78,29 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_I2C | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP ) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC)) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_MISC + #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index 61cf70576d7..569800aa231 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -60,32 +60,44 @@ #undef CONFIG_WATCHDOG -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_DS164x -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP) -#define CONFIG_NETCONSOLE +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP -#include <cmd_confdefs.h> + +#define CONFIG_NETCONSOLE #define CFG_LONGHELP #define CFG_PROMPT "=> " @@ -178,7 +190,7 @@ #define CONFIG_SYS_CLK_FREQ 33333333 #define CFG_CACHELINE_SIZE 32 -#if CONFIG_COMMANDS & CFG_CMD_KGDB +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 #endif diff --git a/include/configs/lart.h b/include/configs/lart.h index a00640bf8e6..8f18c9f1b1b 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -59,10 +59,21 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" @@ -73,7 +84,7 @@ #define CONFIG_BOOTFILE "elinos-lart" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/logodl.h b/include/configs/logodl.h index 715ed74eade..2b2d37751e0 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -54,10 +54,26 @@ #define CONFIG_BAUDRATE 19200 #undef CONFIG_MISC_INIT_R /* FIXME: misc_init_r() missing */ -#define CONFIG_COMMANDS (CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO) -/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_RUN + #define CONFIG_BOOTDELAY 3 /* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 7e515230a33..e3fef5e2ce9 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -1,12 +1,8 @@ /* - * (C) Copyright 2000 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Configuation settings for the EP7312 board. - * - * Modified to work on Armadillo HT1070 ARM720T board - * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com + * Configuation settings for the LPC2292SODIMM board from Embedded Artists. * * See file CREDITS for list of people who contributed to this * project. @@ -31,7 +27,7 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram + * If we are developing, we might want to start u-boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_INIT_CRITICAL /* undef for developing */ @@ -46,7 +42,7 @@ #define CONFIG_ARM7 1 /* This is a ARM7 CPU */ #define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ #define CONFIG_LPC2292 -#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ #undef CONFIG_USE_IRQ /* don't need them anymore */ @@ -70,24 +66,31 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_MMC | \ - CFG_CMD_NET | \ - CFG_CMD_PING) +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 5 /* @@ -103,11 +106,12 @@ #define CFG_MEMTEST_START 0x40000000 /* memtest works on */ #define CFG_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/ +#define CFG_LOAD_ADDR 0x00040000 /* default load address for */ + /* armadillo: kernel img is here*/ -#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ #define CFG_HZ 2048 /* decrementer freq in Hz */ /* valid baudrates */ @@ -154,5 +158,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_MMC 1 +/* we use this ethernet chip */ +#define CONFIG_ENC28J60 #endif /* __CONFIG_H */ diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h index d7d0460ef66..04148898eac 100644 --- a/include/configs/lpd7a400.h +++ b/include/configs/lpd7a400.h @@ -55,19 +55,32 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifndef USE_920T_MMU -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE)) + #define CONFIG_CMD_PING + #undef CONFIG_CMD_CACHE #else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE) + #define CONFIG_CMD_DATE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 3 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h index 4002e6849cc..11ede968180 100644 --- a/include/configs/lpd7a404.h +++ b/include/configs/lpd7a404.h @@ -55,19 +55,32 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifndef USE_920T_MMU -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE)) + #define CONFIG_CMD_PING) + #undef CONFIG_CMD_CACHE #else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE) + #define CONFIG_CMD_DATE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 3 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/luan.h b/include/configs/luan.h index 9c8769b200b..a09dd74733e 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -39,7 +39,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -135,7 +134,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ -#undef CONFIG_DDR_ECC /* no ECC support for now */ +#define CONFIG_DDR_ECC 1 /* with ECC support */ /*----------------------------------------------------------------------- * I2C @@ -212,31 +211,38 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - 0) - -/* this must be included AFTER the definition of CONFIG_COMMANDS */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -264,7 +270,7 @@ * PCI stuff *----------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_PCI) +#if defined(CONFIG_CMD_PCI) /* General PCI */ #define CONFIG_PCI /* include pci support */ @@ -272,14 +278,13 @@ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #undef CFG_PCI_MASTER_INIT #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CFG_PCI_SUBSYS_DEVICEID 0x4403 /* whatever */ -#endif /* CONFIG_COMMANDS & CFG_CMD_PCI */ +#endif /* * For booting Linux, the board info and command line data @@ -293,7 +298,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -305,7 +310,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index ad1035b6d63..4adf2542219 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -67,10 +67,24 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -82,7 +96,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_TIMESTAMP -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 9b4c0046ef4..8a8270260a3 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -170,34 +170,41 @@ #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BMP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 +#define CONFIG_CMD_DIAG #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP ) + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options @@ -210,7 +217,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -276,7 +283,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0x40000000 -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -370,7 +377,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h new file mode 100644 index 00000000000..be483245b91 --- /dev/null +++ b/include/configs/lwmon5.h @@ -0,0 +1,505 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * lwmon5.h - configuration for lwmon5 board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_LWMON5 1 /* Board is lwmon5 */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_LIME_BASE_0 0xc0000000 +#define CFG_LIME_BASE_1 0xc1000000 +#define CFG_LIME_BASE_2 0xc2000000 +#define CFG_LIME_BASE_3 0xc3000000 +#define CFG_FPGA_BASE_0 0xc4000000 +#define CFG_FPGA_BASE_1 0xc4200000 +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ +#define CFG_OCM_DATA_ADDR CFG_OCM_BASE + +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* no external clock provided */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/* define this if you want console on UART1 */ +#define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */ + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH0 0xFC000000 +#define CFG_FLASH1 0xF8000000 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 } + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ +#define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ +#if 0 /* test-only: disable ECC for now */ +#define CONFIG_DDR_ECC 1 /* enable ECC */ +#define CFG_POST_ECC_ON CFG_POST_ECC +#else +#define CFG_POST_ECC_ON 0 +#endif + +/* POST support */ +#define CONFIG_POST (CFG_POST_CACHE | \ + CFG_POST_CPU | \ + CFG_POST_ECC_ON | \ + CFG_POST_ETHER | \ + CFG_POST_FPU | \ + CFG_POST_I2C | \ + CFG_POST_MEMORY | \ + CFG_POST_RTC | \ + CFG_POST_SPR | \ + CFG_POST_UART) + +#define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */ +#define CONFIG_LOGBUFFER +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_EEPROM_ADDR 0x53 /* EEPROM AT24C128 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel AT24C128 has */ + /* 64 byte page write mode using*/ + /* last 6 bits of the address */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE + +#define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ +#define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ +#define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ + +#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ +#if 0 +#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ +#endif + +#define CONFIG_PREBOOT "setenv bootdelay 15" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=lwmon5\0" \ + "netdev=eth0\0" \ + "unlock=yes\0" \ + "logversion=2\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xxFP\0" \ + "bootfile=/tftpboot/lwmon5/uImage\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ + "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \ + "cp.b 200000 FFF80000 80000\0" \ + "upd=run load;run update\0" \ + "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \ + "autoscr 200000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 300 + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* USB */ +#ifdef CONFIG_440EPX +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +#endif /* CONFIG_440EPX */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOG +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#ifdef CONFIG_440EPX +#define CONFIG_CMD_USB +#endif + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CONFIG_SUPPORT_VFAT + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03050200 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xfc000) + +/* Memory Bank 1 (Lime) initialization */ +#define CFG_EBC_PB1AP 0x01004380 +#define CFG_EBC_PB1CR (CFG_LIME_BASE_0 | 0xdc000) + +/* Memory Bank 2 (FPGA) initialization */ +#define CFG_EBC_PB2AP 0x01004400 +#define CFG_EBC_PB2CR (CFG_FPGA_BASE_0 | 0x1c000) + +/* Memory Bank 3 (FPGA2) initialization */ +#define CFG_EBC_PB3AP 0x01004400 +#define CFG_EBC_PB3CR (CFG_FPGA_BASE_1 | 0x1c000) + +#define CFG_EBC_CFG 0xb8400000 + +/*----------------------------------------------------------------------- + * Graphics (Fujitsu Lime) + *----------------------------------------------------------------------*/ +/* SDRAM Clock frequency adjustment register */ +#define CFG_LIME_SDRAM_CLOCK 0xC1FC0038 +/* Lime Clock frequency is to set 100MHz */ +#define CFG_LIME_CLOCK_100MHZ 0x00000 +#if 0 +/* Lime Clock frequency for 133MHz */ +#define CFG_LIME_CLOCK_133MHZ 0x10000 +#endif + +/* SDRAM Parameter register */ +#define CFG_LIME_MMR 0xC1FCFFFC +/* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars + and pixel flare on display when 133MHz was configured. According to + SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */ +#ifdef CFG_LIME_CLOCK_133MHZ +#define CFG_LIME_MMR_VALUE 0x414FB7F3 +#else +#define CFG_LIME_MMR_VALUE 0x414FB7F2 +#endif + +/*----------------------------------------------------------------------- + * GPIO Setup + *----------------------------------------------------------------------*/ +#define CFG_GPIO_PHY1_RST 12 +#define CFG_GPIO_FLASH_WP 14 +#define CFG_GPIO_PHY0_RST 22 +#define CFG_GPIO_EEPROM_EXT_WP 55 +#define CFG_GPIO_EEPROM_INT_WP 57 +#define CFG_GPIO_LIME_S 59 +#define CFG_GPIO_LIME_RST 60 +#define CFG_GPIO_WATCHDOG 63 + +/*----------------------------------------------------------------------- + * PPC440 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 621a81c9c56..cc2dbcdef9b 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -40,11 +40,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration * @@ -92,27 +87,37 @@ /* USB */ #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE /* automatic software updates (see board/mcc200/auto_update.c) */ #define CONFIG_AUTO_UPDATE 1 + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_USB_CMD | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_USB + +#undef CONFIG_CMD_NET -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ @@ -128,20 +133,30 @@ # define CFG__LINUX_CONSOLE "ttyS0" #else # define CFG__BOARDNAME "mcc200" -# define CFG__LINUX_CONSOLE "ttyEU7" +# define CFG__LINUX_CONSOLE "ttyEU5" #endif +/* Network */ +#define CONFIG_ETHADDR 00:17:17:ff:00:00 +#define CONFIG_IPADDR 10.76.9.29 +#define CONFIG_SERVERIP 10.76.9.1 + +#include <version.h> /* For U-Boot version */ + #define CONFIG_EXTRA_ENV_SETTINGS \ + "ubootver=" U_BOOT_VERSION "\0" \ "netdev=eth0\0" \ "hostname=" CFG__BOARDNAME "\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "ramargs=setenv bootargs root=/dev/mtdblock2 " \ + "rootfstype=cramfs\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ + "console=${console},${baudrate} " \ + "ubootver=${ubootver} board=${board}\0" \ "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addcons;" \ @@ -153,6 +168,7 @@ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ "text_base=" MK_STR(TEXT_BASE) "\0" \ + "kernel_addr=0xFC0C0000\0" \ "update=protect off ${text_base} +${filesize};" \ "era ${text_base} +${filesize};" \ "cp.b 200000 ${text_base} ${filesize}\0" \ @@ -169,7 +185,7 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* * I2C configuration @@ -253,7 +269,7 @@ /* * Ethernet configuration */ -#define CONFIG_MPC5xxx_FEC 1 +/*#define CONFIG_MPC5xxx_FEC 1*/ /* * Define CONFIG_FEC_10MBIT to force FEC at 10Mb */ @@ -291,7 +307,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -307,6 +323,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ @@ -329,6 +350,13 @@ #define CFG_CS1_SIZE 0x00001000 #define CFG_CS1_CFG 0x1d300 +/* Leica - build revision resistors */ +/* +#define CFG_CS3_START 0x80020000 +#define CFG_CS3_SIZE 0x00000004 +#define CFG_CS3_CFG 0x1d300 +*/ + /* * Select one of quarts as a default * console. If undefined - PSC console @@ -384,4 +412,8 @@ #define CONFIG_USB_CLOCK 0x0001BBBB #define CONFIG_USB_CONFIG 0x00005000 +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR "432" +#define CONFIG_SILENT_CONSOLE 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 0c1029426c2..49919fbafbb 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -50,11 +50,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -88,26 +83,32 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_BSP +#define CONFIG_CMD_ELF + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -258,7 +259,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -276,6 +277,11 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/ml300.h b/include/configs/ml300.h index 6762cd61eae..0183041842a 100644 --- a/include/configs/ml300.h +++ b/include/configs/ml300.h @@ -87,13 +87,28 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define REMOVE_COMMANDS (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \ - CFG_CMD_IMLS ) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_NET) \ - & ~REMOVE_COMMANDS) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NET + +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_IMLS + /* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */ /* 300000000 */ diff --git a/include/configs/ml401.h b/include/configs/ml401.h index cb159e79dc6..7eeae708a72 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -28,6 +28,7 @@ #include "../board/xilinx/ml401/xparameters.h" #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define MICROBLAZE_V5 1 #define CONFIG_ML401 1 /* ML401 Board */ /* uart */ @@ -36,11 +37,11 @@ #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } /* setting reset address */ -#define CFG_RESET_ADDRESS TEXT_BASE +/*#define CFG_RESET_ADDRESS TEXT_BASE*/ /* ethernet */ #define CONFIG_EMACLITE 1 -#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES +#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID /* gpio */ #define CFG_GPIO_0 1 @@ -58,6 +59,10 @@ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +/* FSL */ +#define CFG_FSL_2 +#define FSL_INTR_2 1 + /* * memory layout - Example * TEXT_BASE = 0x1200_0000; @@ -93,7 +98,8 @@ /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ +/* start of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 @@ -117,6 +123,7 @@ #define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + #define CFG_FLASH_PROTECTION /* hardware flash protection */ #ifdef RAMENV #define CFG_ENV_IS_NOWHERE 1 @@ -135,69 +142,62 @@ #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) + #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ -#ifdef FLASH - #ifdef RAMENV - #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_MISC |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_IRQ |\ - CFG_CMD_ASKENV |\ - CFG_CMD_BDI |\ - CFG_CMD_RUN |\ - CFG_CMD_LOADS |\ - CFG_CMD_LOADB |\ - CFG_CMD_IMI |\ - CFG_CMD_NET |\ - CFG_CMD_CACHE |\ - CFG_CMD_IMLS |\ - CFG_CMD_FLASH |\ - CFG_CMD_PING \ - ) - #else /* !RAMENV */ - #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_MISC |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_IRQ |\ - CFG_CMD_ASKENV |\ - CFG_CMD_BDI |\ - CFG_CMD_RUN |\ - CFG_CMD_LOADS |\ - CFG_CMD_LOADB |\ - CFG_CMD_IMI |\ - CFG_CMD_NET |\ - CFG_CMD_CACHE |\ - CFG_CMD_IMLS |\ - CFG_CMD_FLASH |\ - CFG_CMD_PING |\ - CFG_CMD_ENV |\ - CFG_CMD_SAVES \ - ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MFSL +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + +#if defined(FLASH) + #define CONFIG_CMD_ECHO + #define CONFIG_CMD_FLASH + #define CONFIG_CMD_IMLS + #define CONFIG_CMD_JFFS2 + + #if !defined(RAMENV) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_SAVES #endif +#endif + +#if defined(CONFIG_CMD_JFFS2) +/* JFFS2 partitions */ +#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ +#define MTDIDS_DEFAULT "nor0=ml401-0" -#else /* !FLASH */ - #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_MISC |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_IRQ |\ - CFG_CMD_ASKENV |\ - CFG_CMD_BDI |\ - CFG_CMD_RUN |\ - CFG_CMD_LOADS |\ - CFG_CMD_LOADB |\ - CFG_CMD_IMI |\ - CFG_CMD_NET |\ - CFG_CMD_CACHE |\ - CFG_CMD_PING \ - ) -#endif /* !FLASH */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* default mtd partition table */ +#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ + "256k(env),3m(kernel),1m(romfs),"\ + "1m(cramfs),-(jffs2)" +#endif /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " @@ -207,7 +207,7 @@ #define CFG_LONGHELP #define CFG_LOAD_ADDR 0x12000000 /* default load address */ -#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" @@ -221,10 +221,19 @@ #define CFG_HZ 1000 /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -#define CONFIG_DOS_PARTITION -*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION + +#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" + +#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ + "nor0=ml401-0\0"\ + "mtdparts=mtdparts=ml401-0:"\ + "256k(u-boot),256k(env),3m(kernel),"\ + "1m(romfs),1m(cramfs),-(jffs2)\0" + #endif /* __CONFIG_H */ diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index 20287674fab..4461bdfd187 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -63,12 +63,23 @@ #define CONFIG_BAUDRATE 38400 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_JFFS2)) +#define CONFIG_CMD_JFFS2 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.30.2 @@ -81,7 +92,7 @@ #define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000" #define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 5328e8d6b1c..9a216321628 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -26,12 +26,10 @@ #ifndef __CONFIG_H #define __CONFIG_H - /* * High Level Configuration Options */ - /* CPU and board */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ @@ -39,21 +37,35 @@ /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_ELF | \ - CFG_CMD_MII | \ - CFG_CMD_BEDBUG | \ - CFG_CMD_NET | \ - CFG_CMD_PING) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DTT /* @@ -71,7 +83,7 @@ #define CONFIG_MPC5xxx_FEC 1 #define CONFIG_PHY_ADDR 0x2 #define CONFIG_PHY_TYPE 0x79c874 - +#define CONFIG_RESET_PHY_R 1 /* * Autobooting @@ -94,42 +106,51 @@ * Default environment settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "sdram_test=0\0" \ "netdev=eth0\0" \ "hostname=motionpro\0" \ "netmask=255.255.0.0\0" \ "ipaddr=192.168.160.22\0" \ "serverip=192.168.1.1\0" \ "gatewayip=192.168.1.1\0" \ - "kernel_addr=200000\0" \ + "console=ttyPSC0,115200\0" \ "u-boot_addr=100000\0" \ - "kernel_sector=20\0" \ - "kernel_size=1000\0" \ - "console=ttyS0,115200\0" \ + "kernel_addr=200000\0" \ + "fdt_addr=400000\0" \ + "ramdisk_addr=500000\0" \ + "multi_image_addr=800000\0" \ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ - "load=tftp $(u-boot_addr) $(u-boot)\0" \ + "bootfile=/tftpboot/motionpro/uImage\0" \ + "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ + "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ + "multi_image_file=kernel+initrd+dtb.img\0" \ + "load=tftp ${u-boot_addr} ${u-boot}\0" \ "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ - "cp.b $(u-boot_addr) fff00000 $(filesize);" \ + "cp.b ${u-boot_addr} fff00000 ${filesize};" \ "prot on fff00000 fff3ffff\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $(bootargs) console=$(console) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \ - "bootm $(kernel_addr)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "fstype=ext3\0" \ - "fatargs=setenv bootargs init=/linuxrc rw\0" \ + "nfsroot=${serverip}:${rootpath}\0" \ + "fat_args=setenv bootargs rw\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off panic=1 " \ + "console=${console}\0" \ + "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ + "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; " \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "net_self=tftp ${kernel_addr} ${bootfile}; " \ + "tftp ${fdt_addr} ${fdt_file}; " \ + "tftp ${ramdisk_addr} ${ramdisk_file}; " \ + "run ramargs addip; " \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "fat_multi=run fat_args addip; fatload ide 0:1 " \ + "${multi_image_addr} ${multi_image_file}; " \ + "bootm ${multi_image_addr}\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" - /* * do board-specific init */ @@ -148,6 +169,12 @@ /* + * Set IPB speed to 100MHz + */ +#define CFG_IPBCLK_EQUALS_XLBCLK + + +/* * Memory map */ /* @@ -243,6 +270,84 @@ #define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ #define CONFIG_FLASH_16BIT /* Flash is 16-bit */ +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=motionpro-0" +#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ + "13m(fs),2m(kernel),256k(uboot)," \ + "64k(env),64k(redund_env),64k(dtb)," \ + "-(user_data)" + +/* + * IDE/ATA configuration + */ +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 1 +#define CONFIG_IDE_PREINIT + +#define CFG_ATA_DATA_OFFSET 0x0060 +#define CFG_ATA_REG_OFFSET CFG_ATA_DATA_OFFSET +#define CFG_ATA_STRIDE 4 +#define CONFIG_DOS_PARTITION + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* select I2C module #2 */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* DTT driver needs this */ +#define CFG_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */ +#define CFG_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */ + + +/* + * RTC configuration + */ +#define CONFIG_RTC_DS1337 1 +#define CFG_I2C_RTC_ADDR 0x68 + + +/* + * Status LED configuration + */ +#define CONFIG_STATUS_LED /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED + +#define ENABLE_GPIO_OUT 0x00000024 +#define LED_ON 0x00000010 + +#ifndef __ASSEMBLY__ +/* + * In case of Motion-PRO, a LED is identified by its corresponding + * GPT Enable and Mode Select Register. + */ +typedef volatile unsigned long * led_id_t; + +extern void __led_init(led_id_t id, int state); +extern void __led_toggle(led_id_t id); +extern void __led_set(led_id_t id, int state); +#endif /* __ASSEMBLY__ */ + + +/* + * Temperature sensor + */ +#define CONFIG_DTT_LM75 1 +#define CONFIG_DTT_SENSORS { 0x49 } + /* * Environment settings @@ -253,6 +358,9 @@ #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_SECT_SIZE 0x10000 +/* Configuration of redundant environment */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) /* * Pin multiplexing configuration @@ -270,11 +378,17 @@ /* + * Motion-PRO's CPLD revision control register + */ +#define CPLD_REV_REGISTER (CFG_CS2_START + 0x06) + + +/* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ @@ -302,4 +416,13 @@ /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ #define CFG_RESET_ADDRESS 0xfff00100 +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + #endif /* __CONFIG_H */ diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 04f1f240808..ea5a44b1d1e 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -101,12 +101,18 @@ #undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ -#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_KEYBOARD 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_AT91C_PQFP_UHPBUG 1 +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE +#define CFG_USB_OHCI_SLOT_NAME "at91rm9200" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + #undef CONFIG_HARD_I2C #ifdef CONFIG_HARD_I2C @@ -123,40 +129,56 @@ #define CONFIG_BOOTDELAY 3 -#ifdef CONFIG_HARD_I2C -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - CFG_CMD_MISC)) -#else -#define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB | \ - CFG_CMD_CACHE) & \ - ~(CFG_CMD_BDI | \ - CFG_CMD_IMI | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC | \ - CFG_CMD_LOADS )) +#if !defined(CONFIG_HARD_I2C) #define CONFIG_TIMESTAMP #endif -#define CFG_LONGHELP -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_HARD_I2C) + + #define CONFIG_CMD_DATE + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C + #define CONFIG_CMD_MISC + +#else + + #define CONFIG_CMD_USB + #define CONFIG_CMD_CACHE + + #undef CONFIG_CMD_AUTOSCRIPT + #undef CONFIG_CMD_BDI + #undef CONFIG_CMD_FPGA + #undef CONFIG_CMD_IMI + #undef CONFIG_CMD_LOADS + #undef CONFIG_CMD_MISC + +#endif + + +#define CFG_LONGHELP #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ #define CFG_MEMTEST_START PHYS_SDRAM #define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 243a3f6c8fc..bd3107ab23c 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -80,9 +80,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,7448@0" #define OF_TSI "tsi108@c0000000" #define OF_TBCLK (bd->bi_busfreq / 8) @@ -146,25 +143,34 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_CACHE \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C \ - | CFG_CMD_SDRAM \ - | CFG_CMD_EEPROM \ - | CFG_CMD_FLASH \ - | CFG_CMD_ENV \ - | CFG_CMD_BSP \ - | CFG_CMD_DHCP \ - | CFG_CMD_PING \ - | CFG_CMD_DATE) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_PCI +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_DATE + /*set date in u-boot*/ #define CONFIG_RTC_M48T35A @@ -182,7 +188,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ #else @@ -366,9 +372,9 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */ +#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */ #define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ -#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ } #define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI @@ -387,7 +393,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 7f3dfd5c987..5125b21e04f 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -78,25 +78,32 @@ #define CONFIG_BAUDRATE 115200 -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_REGINFO | \ - CFG_CMD_ELF) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_ELF -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/msdk mem=48M" #define CONFIG_BOOTFILE "mx1ads" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 9816be8dc4f..d527d098f57 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -34,22 +34,30 @@ #undef _CONFIG_UART4 /* internal uart 4 */ #undef CONFIG_SILENT_CONSOLE /* use this to disable output */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if - * neccessary in include/cmd_confdefs.h file. (Un)comment for getting - * functionality or size of u-boot code. + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - & ~CFG_CMD_LOADS \ - & ~CFG_CMD_CONSOLE \ - & ~CFG_CMD_AUTOSCRIPT \ - & ~CFG_CMD_NET \ - & ~CFG_CMD_PING \ - & ~CFG_CMD_DHCP \ - | CFG_CMD_JFFS2 \ - ) - -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_JFFS2 + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_DHCP + /* * Boot options. Setting delay to -1 stops autostart count down. @@ -160,7 +168,7 @@ * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ /* diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 697796a1143..33159d31563 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -140,42 +140,37 @@ #define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0" #define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)" -#if 0 -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_IMI | \ - CFG_CMD_LOADB | \ - CFG_CMD_NET | \ - CFG_CMD_MEMORY | \ - CFG_CMD_PING | \ - CFG_CMD_RUN) -#else -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_NAND | \ - CFG_CMD_IMI | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_LOADB | \ - CFG_CMD_NET | \ - CFG_CMD_MEMORY | \ - CFG_CMD_PING | \ - CFG_CMD_RUN) +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#endif -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -#define CONFIG_LOOPW +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_LOOPW #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index 0b1541d5c34..1d691f9731d 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -69,33 +69,28 @@ #define CONFIG_BAUDRATE 38400 -/*********************************************************** - * Command definition - ***********************************************************/ -#if 0 /* @TODO */ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - /*CFG_CMD_NAND |*/ \ - /*CFG_CMD_EEPROM |*/ \ - /*CFG_CMD_I2C |*/ \ - /*CFG_CMD_USB |*/ \ - CFG_CMD_REGINFO | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF) -#else -#define CONFIG_COMMANDS \ - (CONFIG_CMD_BDI | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_LOADB | \ - CFG_CMD_LOADS | \ - CFG_CMD_MEMORY) -#endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + #define CONFIG_BOOTDELAY 3 /*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ @@ -108,7 +103,7 @@ /*#define CONFIG_BOOTFILE "elinos-lart" */ /*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index 5c05a745dbb..f1d73e4c539 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -37,11 +37,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -73,8 +68,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#define ADD_PCI_CMD CFG_CMD_PCI - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -82,20 +75,29 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - ADD_PCI_CMD ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_PCI + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -137,17 +139,17 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) +#if defined(CFG_IPBCLK_EQUALS_XLBCLK) /* * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ -#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif #endif @@ -246,7 +248,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -262,6 +264,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ @@ -276,7 +283,7 @@ #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#ifdef CFG_PCISPEED_66 +#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* * For 66 MHz PCI clock additional Wait State is needed for CS0 (flash). */ diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index fe4e63810ee..bc2fd33ff5e 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -41,6 +41,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_OCOTEA 1 /* Board is ebony */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ @@ -136,7 +137,7 @@ #define CFG_FLASH_WORD_SIZE unsigned char #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ @@ -231,26 +232,38 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -259,7 +272,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -293,7 +306,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ @@ -310,7 +322,7 @@ */ #define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -322,7 +334,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 016d3d8bd02..8623ed3cc88 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -86,11 +86,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #include <configs/omap1510.h> #define CONFIG_BOOTDELAY 3 @@ -98,7 +111,7 @@ #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index c6ca689a5fe..74bba05fe8a 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -81,11 +81,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #include <configs/omap1510.h> #define CONFIG_BOOTDELAY 3 @@ -93,7 +106,7 @@ #define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" #define CFG_AUTOLOAD "n" /* No autoload */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index f28ede09674..734f3543927 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -82,11 +82,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #include <configs/omap1510.h> #define CONFIG_BOOTDELAY 3 @@ -98,7 +111,7 @@ #define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ #define CONFIG_BOOTFILE "uImage" /* file to load */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 58374616a14..8ae8efeb817 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -119,15 +119,34 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifdef CFG_NAND_BOOT -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2) + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_I2C + #define CONFIG_CMD_NAND + #define CONFIG_CMD_JFFS2 #else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) + #define CONFIG_CMD_DHCP + #define CONFIG_CMD_I2C + #define CONFIG_CMD_JFFS2 + + #undef CONFIG_CMD_AUTOSCRIPT #endif -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + /* * Board NAND Info. diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 5db4f52beb6..16ce2f61aec 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -86,11 +86,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #include <configs/omap1510.h> #define CONFIG_BOOTDELAY 3 @@ -102,7 +115,7 @@ #define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ #define CONFIG_BOOTFILE "uImage" /* file to load */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index fda55cf06fd..c4d253af45c 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -90,14 +90,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT /* - * This must be included AFTER the definition of CONFIG_COMMANDS (if any) + * Command line configuration. */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + -#include <cmd_confdefs.h> #include <configs/omap730.h> #include <configs/h2_p2_dbg_board.h> @@ -112,7 +122,7 @@ #define CONFIG_SERVERIP 192.150.0.100 #define CONFIG_BOOTFILE "uImage" /* File to load */ -#if defined (CONFIG_COMMANDS) && defined (CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* Speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* Which serial port to use */ #endif diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 54462f007cd..bec442d9839 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -60,7 +60,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -251,26 +250,36 @@ #endif #define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_PCI | \ - CFG_CMD_CACHE | \ - CFG_CMD_SDRAM) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_PCI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_SDRAM + /*----------------------------------------------------------------------- * Miscellaneous configurable options @@ -280,7 +289,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -421,7 +430,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index aa0901f3ff4..51f19a1456c 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -35,6 +35,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_P3P440 1 /* Board is P3P440 */ #define CONFIG_440GP 1 /* Specifc GP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ @@ -167,25 +168,37 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -194,7 +207,7 @@ *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -226,7 +239,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CONFIG_DISABLE_PISE_TEST /* disable PISE test (PCIX only)*/ @@ -285,7 +297,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -304,7 +316,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -316,7 +328,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index ed1893f5742..810e0f04628 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -132,11 +132,8 @@ /*---USB -------------------------------------------*/ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION -#else -#define ADD_USB_CMD 0 #endif /*---ATA PCMCIA ------------------------------------*/ @@ -179,11 +176,36 @@ #define CFG_ICACHE_SIZE 16384 #define CFG_CACHELINE_SIZE 32 -#define CONFIG_COMMANDS \ - (((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_PING) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | CFG_CMD_IDE | \ - CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | \ - CFG_CMD_BDI | CFG_CMD_BEDBUG)) | ADD_USB_CMD) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_RUN +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG #endif /* __CONFIG_H */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 23bdfc8dfb9..7653ba1d245 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -32,6 +32,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_PCS440EP 1 /* Board is PCS440EP */ #define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -103,21 +104,28 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_ENV_OVERWRITE 1 /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +#define ENV_NAME_REVLEV "revision_level" +#define ENV_NAME_SOLDER "solder_switch" +#define ENV_NAME_DIP "dip" + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define SPD_EEPROM_ADDRESS {0x50} +#define CONFIG_PROG_SDRAM_TLB 1 /*----------------------------------------------------------------------- * I2C @@ -142,6 +150,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=pcs440ep\0" \ + "use_eeprom_ethaddr=default\0" \ + "cs_test=off\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -172,6 +182,36 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +/* check U-Boot image with SHA1 sum */ +#define CONFIG_SHA1_CHECK_UB_IMG 1 +#define CONFIG_SHA1_START CFG_MONITOR_BASE +#define CONFIG_SHA1_LEN CFG_MONITOR_LEN + +/*----------------------------------------------------------------------- + * Definitions for status LED + */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 + +#define STATUS_LED_BIT 0x08 /* DIAG1 is on GPIO_PPC_1 */ +#define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_BIT1 0x04 /* DIAG2 is on GPIO_PPC_2 */ +#define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_BIT2 0x02 /* DIAG3 is on GPIO_PPC_3 */ +#define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_BIT3 0x01 /* DIAG4 is on GPIO_PPC_4 */ +#define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +#define STATUS_LED_STATE3 STATUS_LED_OFF + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + #define CONFIG_BAUDRATE 115200 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -207,37 +247,48 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_USB ) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_SUPPORT_VFAT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_USB + +#define CONFIG_SUPPORT_VFAT /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -266,7 +317,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -315,76 +365,76 @@ /*----------------------------------------------------------------------- * PPC440 GPIO Configuration */ -#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \ +#define CFG_440_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ { \ /* GPIO Core 0 */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6 EBC_CS_N(1) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7 EBC_CS_N(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8 EBC_CS_N(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9 EBC_CS_N(4) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO10 EBC_CS_N(5) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO11 EBC_BUS_ERR */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO12 ZII_p0Rxd(0) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO13 ZII_p0Rxd(1) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO14 ZII_p0Rxd(2) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO15 ZII_p0Rxd(3) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16 ZII_p0Txd(0) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17 ZII_p0Txd(1) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18 ZII_p0Txd(2) */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19 ZII_p0Txd(3) */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO20 ZII_p0Rx_er */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO21 ZII_p0Rx_dv */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO22 ZII_p0RxCrs */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23 ZII_p0Tx_er */ \ -{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24 ZII_p0Tx_en */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO25 ZII_p0Col */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO26 USB2D_RXVALID */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO28 USB2D_TXVALID */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ -{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO12 ZII_p0Rxd(0) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO13 ZII_p0Rxd(1) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO14 ZII_p0Rxd(2) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO15 ZII_p0Rxd(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO16 ZII_p0Txd(0) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO17 ZII_p0Txd(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO18 ZII_p0Txd(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO19 ZII_p0Txd(3) */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO20 ZII_p0Rx_er */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO21 ZII_p0Rx_dv */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO22 ZII_p0RxCrs */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO23 ZII_p0Tx_er */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO24 ZII_p0Tx_en */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO25 ZII_p0Col */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO26 USB2D_RXVALID */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ }, \ { \ /* GPIO Core 1 */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO32 USB2D_OPMODE0 */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO33 USB2D_OPMODE1 */ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT3 }, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37 UART0_RTS_N */ \ -{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT2 }, /* GPIO39 UART0_RI_N UART1_SIN */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO40 UIC_IRQ(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO41 UIC_IRQ(1) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO42 UIC_IRQ(2) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO43 UIC_IRQ(3) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ -{ GPIO1_BASE, GPIO_BI, GPIO_SEL }, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO49 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO50 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO51 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO52 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO53 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO54 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO55 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO56 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO57 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO58 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO59 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO60 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO61 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO62 Unselect via TraceSelect Bit */ \ -{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO63 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO32 USB2D_OPMODE0 */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO33 USB2D_OPMODE1 */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_NO_CHG}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT3, GPIO_OUT_NO_CHG}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO37 UART0_RTS_N */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_NO_CHG}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_NO_CHG}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_BI, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO63 Unselect via TraceSelect Bit */ \ } \ } @@ -393,7 +443,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -405,9 +455,38 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */ + +#define CONFIG_IDE_PREINIT 1 +#define CONFIG_IDE_RESET 1 + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_CF1 + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x0000) + #endif /* __CONFIG_H */ diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h index 73aa3a88259..e3c884392c7 100644 --- a/include/configs/pcu_e.h +++ b/include/configs/pcu_e.h @@ -89,28 +89,34 @@ * ---------------------------------------------------------------- */ #define CFG_SPI_INIT_OFFSET 0xB00 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#define CONFIG_BOOTP_MASK \ - ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 06c66528784..5b5b0efb76a 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -71,25 +71,33 @@ #define CONFIG_BAUDRATE 115200 #define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ -#if defined(CONFIG_SCPU) -#define CMD_NAND_ADD 0 -#else -#define CMD_NAND_ADD CFG_CMD_NAND + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING + +#if !defined(CONFIG_SCPU) +#define CONFIG_CMD_NAND #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_NET | \ - CFG_CMD_MII | \ - CMD_NAND_ADD | \ - CFG_CMD_I2C | \ - CFG_CMD_ELF | \ - CFG_CMD_PING) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -/* These are u-boot generic parameters */ -#include <cmd_confdefs.h> #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index fefdb3cca01..18d0c879a9e 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -49,11 +49,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -90,13 +85,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif - -#define ADD_PCI_CMD CFG_CMD_PCI - -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */ - #endif /* Partitions */ @@ -106,26 +94,35 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - ADD_PCI_CMD ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE + +#ifdef CONFIG_MPC5200 +#define CONFIG_CMD_PCI +#endif + #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1 @@ -171,7 +168,7 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #endif /* * I2C configuration @@ -263,7 +260,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -281,6 +278,11 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index a6c23712b5d..863029d146d 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -66,10 +66,23 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_NET + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -83,7 +96,7 @@ #define CONFIG_INITRD_TAG #define CONFIG_SETUP_MEMORY_TAGS -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 072b9dd5b46..fe7de7bed0f 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -25,75 +25,91 @@ /* * Debug * - * DEBUG - Define this is you want extra debug info - * GTREGREAD - Required to build with debug - * do_bdinfo - Required to build with debug + * DEBUG - Define this is you want extra debug info + * GTREGREAD - Required to build with debug + * do_bdinfo - Required to build with debug */ #undef DEBUG -#define GTREGREAD(x) 0xFFFFFFFF +#ifdef DEBUG +#define GTREGREAD(x) 0xFFFFFFFF #define do_bdinfo(a,b,c,d) - +#endif /* * CPU type * - * CONFIG_7xx - We have a 750 or 755 CPU - * CONFIG_74xx - We have a 7400 CPU - * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) - * CONFIG_BUS_CLK - System bus clock in Hz + * CONFIG_7xx - We have a 750 or 755 CPU + * CONFIG_74xx - We have a 7400 CPU + * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) + * CONFIG_BUS_CLK - System bus clock in Hz */ #define CONFIG_7xx #undef CONFIG_74xx #undef CONFIG_ALTIVEC -#define CONFIG_BUS_CLK 66000000 +#define CONFIG_BUS_CLK 66000000 /* * Monitor configuration * - * CONFIG_COMMANDS - List of command sets to include in shell + * List of command sets to include in shell * * The following command sets have been tested and known to work: * - * CFG_CMD_CACHE - Cache control commands - * CFG_CMD_MEMORY - Memory display, change and test commands - * CFG_CMD_FLASH - Erase and program flash - * CFG_CMD_ENV - Environment commands - * CFG_CMD_RUN - Run commands stored in env vars - * CFG_CMD_ELF - Load ELF files - * CFG_CMD_NET - Networking/file download commands - * CFG_CMD_PING - ICMP Echo Request command - * CFG_CMD_PCI - PCI Bus scanning command + * CMD_CACHE - Cache control commands + * CMD_MEMORY - Memory display, change and test commands + * CMD_FLASH - Erase and program flash + * CMD_ENV - Environment commands + * CMD_RUN - Run commands stored in env vars + * CMD_ELF - Load ELF files + * CMD_NET - Networking/file download commands + * CMD_PIN - ICMP Echo Request command + * CMD_PCI - PCI Bus scanning command */ -#define CONFIG_COMMANDS ( (CFG_CMD_DFL & ~(CFG_CMD_KGDB)) | \ - CFG_CMD_FLASH | \ - CFG_CMD_ENV | \ - CFG_CMD_RUN | \ - CFG_CMD_ELF | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_PCI) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_PCI + +#undef CONFIG_CMD_KGDB /* * Serial configuration * * CONFIG_CONS_INDEX - Serial console port number (COM1) - * CONFIG_BAUDRATE - Serial speed + * CONFIG_BAUDRATE - Serial speed */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 9600 /* * PCI config * - * CONFIG_PCI - Enable PCI bus - * CONFIG_PCI_PNP - Enable Plug & Play support + * CONFIG_PCI - Enable PCI bus + * CONFIG_PCI_PNP - Enable Plug & Play support * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup */ @@ -105,9 +121,9 @@ /* * Network config * - * CONFIG_NET_MULTI - Support for multiple network interfaces - * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller - * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM + * CONFIG_NET_MULTI - Support for multiple network interfaces + * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller + * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM */ #define CONFIG_NET_MULTI @@ -130,7 +146,7 @@ * Boot config * * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot - * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) + * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) */ #define CONFIG_BOOTCOMMAND \ @@ -149,87 +165,84 @@ */ -#include <cmd_confdefs.h> - - /* * Memory map * * This board runs in a standard CHRP (Map-B) configuration. * - * Type Start End Size Width Chip Sel + * Type Start End Size Width Chip Sel * ----------- ----------- ----------- ------- ------- -------- - * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 - * User LED's 0x78000000 RCS3 - * UART 0x7C000000 RCS2 - * Mailbox 0xFF000000 RCS1 - * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 + * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 + * User LED's 0x78000000 RCS3 + * UART 0x7C000000 RCS2 + * Mailbox 0xFF000000 RCS1 + * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 * * Flash sectors are laid out as follows. * - * Sector Start End Size Comments + * Sector Start End Size Comments * ------- ----------- ----------- ------- ----------- - * 0 0xFFC00000 0xFFC3FFFF 256KB - * 1 0xFFC40000 0xFFC7FFFF 256KB - * 2 0xFFC80000 0xFFCBFFFF 256KB - * 3 0xFFCC0000 0xFFCFFFFF 256KB - * 4 0xFFD00000 0xFFD3FFFF 256KB - * 5 0xFFD40000 0xFFD7FFFF 256KB - * 6 0xFFD80000 0xFFDBFFFF 256KB - * 7 0xFFDC0000 0xFFDFFFFF 256KB - * 8 0xFFE00000 0xFFE3FFFF 256KB - * 9 0xFFE40000 0xFFE7FFFF 256KB - * 10 0xFFE80000 0xFFEBFFFF 256KB - * 11 0xFFEC0000 0xFFEFFFFF 256KB - * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here - * 13 0xFFF40000 0xFFF7FFFF 256KB - * 14 0xFFF80000 0xFFFBFFFF 256KB - * 15 0xFFFC0000 0xFFFDFFFF 128KB - * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here - * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here - * 18 0xFFFF0000 0xFFFFFFFF 64KB + * 0 0xFFC00000 0xFFC3FFFF 256KB + * 1 0xFFC40000 0xFFC7FFFF 256KB + * 2 0xFFC80000 0xFFCBFFFF 256KB + * 3 0xFFCC0000 0xFFCFFFFF 256KB + * 4 0xFFD00000 0xFFD3FFFF 256KB + * 5 0xFFD40000 0xFFD7FFFF 256KB + * 6 0xFFD80000 0xFFDBFFFF 256KB + * 7 0xFFDC0000 0xFFDFFFFF 256KB + * 8 0xFFE00000 0xFFE3FFFF 256KB + * 9 0xFFE40000 0xFFE7FFFF 256KB + * 10 0xFFE80000 0xFFEBFFFF 256KB + * 11 0xFFEC0000 0xFFEFFFFF 256KB + * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here + * 13 0xFFF40000 0xFFF7FFFF 256KB + * 14 0xFFF80000 0xFFFBFFFF 256KB + * 15 0xFFFC0000 0xFFFDFFFF 128KB + * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here + * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here + * 18 0xFFFF0000 0xFFFFFFFF 64KB */ /* * SDRAM config - see memory map details above. * - * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! - * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) + * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! + * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 0x04000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 0x04000000 /* * Flash config - see memory map details above. * - * CFG_FLASH_BASE - Start address of flash memory - * CFG_FLASH_SIZE - Total size of contiguous flash mem + * CFG_FLASH_BASE - Start address of flash memory + * CFG_FLASH_SIZE - Total size of contiguous flash mem * CFG_FLASH_ERASE_TOUT - Erase timeout in ms * CFG_FLASH_WRITE_TOUT - Write timeout in ms * CFG_MAX_FLASH_BANKS - Number of banks of flash on board * CFG_MAX_FLASH_SECT - Number of sectors in a bank */ -#define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_FLASH_SIZE 0x00400000 #define CFG_FLASH_ERASE_TOUT 250000 #define CFG_FLASH_WRITE_TOUT 5000 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 19 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 19 /* * Monitor config - see memory map details above * - * CFG_MONITOR_BASE - Base address of monitor code - * CFG_MALLOC_LEN - Size of malloc pool (128KB) + * CFG_MONITOR_BASE - Base address of monitor code + * CFG_MALLOC_LEN - Size of malloc pool (128KB) */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MALLOC_LEN 0x20000 +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_LEN 0x20000 /* @@ -247,16 +260,16 @@ * CFG_PROMPT - Prompt string */ -#define CFG_BARGSIZE 1024 -#define CFG_BOOTMAPSZ 0x800000 -#define CFG_CBSIZE 1024 -#define CFG_LOAD_ADDR 0x100000 +#define CFG_BARGSIZE 1024 +#define CFG_BOOTMAPSZ 0x800000 +#define CFG_CBSIZE 1024 +#define CFG_LOAD_ADDR 0x100000 #define CFG_LONGHELP -#define CFG_MAXARGS 16 -#define CFG_MEMTEST_START 0x00040000 -#define CFG_MEMTEST_END 0x00040100 -#define CFG_PBSIZE 1024 -#define CFG_PROMPT "=> " +#define CFG_MAXARGS 16 +#define CFG_MEMTEST_START 0x00040000 +#define CFG_MEMTEST_END 0x00040100 +#define CFG_PBSIZE 1024 +#define CFG_PROMPT "=> " /* @@ -268,12 +281,12 @@ * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB) */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0xFFFE0000 -#define CFG_ENV_SIZE 0x1000 -#define CFG_ENV_ADDR_REDUND 0xFFFE8000 -#define CFG_ENV_SIZE_REDUND 0x1000 -#define CFG_ENV_SECT_SIZE 0x8000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_ADDR_REDUND 0xFFFE8000 +#define CFG_ENV_SIZE_REDUND 0x1000 +#define CFG_ENV_SECT_SIZE 0x8000 /* @@ -284,15 +297,15 @@ * copied to top of RAM by the init code. * * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect - * CFG_INIT_RAM_END - Size of Init RAM + * CFG_INIT_RAM_END - Size of Init RAM * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data * CFG_GBL_DATA_OFFSET - Start of global data, top of stack */ -#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) -#define CFG_INIT_RAM_END 0x4000 -#define CFG_GBL_DATA_SIZE 128 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) +#define CFG_INIT_RAM_END 0x4000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) /* @@ -329,71 +342,71 @@ * Cache config * * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific) - * CFG_L2 - L2 cache enabled if defined - * L2_INIT - L2 cache init flags - * L2_ENABLE - L2 cache enable flags + * CFG_L2 - L2 cache enabled if defined + * L2_INIT - L2 cache init flags + * L2_ENABLE - L2 cache enable flags */ -#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SIZE 32 #undef CFG_L2 -#define L2_INIT 0 -#define L2_ENABLE 0 +#define L2_INIT 0 +#define L2_ENABLE 0 /* * Clocks config * - * CFG_BUS_HZ - Bus clock frequency in Hz - * CFG_BUS_CLK - As above (?) - * CFG_HZ - Decrementer freq in Hz + * CFG_BUS_HZ - Bus clock frequency in Hz + * CFG_BUS_CLK - As above (?) + * CFG_HZ - Decrementer freq in Hz */ -#define CFG_BUS_HZ CONFIG_BUS_CLK -#define CFG_BUS_CLK CONFIG_BUS_CLK -#define CFG_HZ 1000 +#define CFG_BUS_HZ CONFIG_BUS_CLK +#define CFG_BUS_CLK CONFIG_BUS_CLK +#define CFG_HZ 1000 /* * Serial port config * * CFG_BAUDRATE_TABLE - List of valid baud rates - * CFG_NS16550 - Include the NS16550 driver + * CFG_NS16550 - Include the NS16550 driver * CFG_NS16550_SERIAL - Include the serial (wrapper) driver - * CFG_NS16550_CLK - Frequency of reference clock + * CFG_NS16550_CLK - Frequency of reference clock * CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port - * CFG_NS16550_COM1 - Base address of 1st serial port + * CFG_NS16550_COM1 - Base address of 1st serial port */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_CLK 3686400 +#define CFG_NS16550_CLK 3686400 #define CFG_NS16550_REG_SIZE -8 -#define CFG_NS16550_COM1 0x7C000000 +#define CFG_NS16550_COM1 0x7C000000 /* * PCI Config - Address Map B (CHRP) */ -#define CFG_PCI_MEMORY_BUS 0x00000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x40000000 -#define CFG_PCI_MEM_BUS 0x80000000 -#define CFG_PCI_MEM_PHYS 0x80000000 -#define CFG_PCI_MEM_SIZE 0x7D000000 -#define CFG_ISA_MEM_BUS 0x00000000 -#define CFG_ISA_MEM_PHYS 0xFD000000 -#define CFG_ISA_MEM_SIZE 0x01000000 -#define CFG_PCI_IO_BUS 0x00800000 -#define CFG_PCI_IO_PHYS 0xFE800000 -#define CFG_PCI_IO_SIZE 0x00400000 -#define CFG_ISA_IO_BUS 0x00000000 -#define CFG_ISA_IO_PHYS 0xFE000000 -#define CFG_ISA_IO_SIZE 0x00800000 +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x40000000 +#define CFG_PCI_MEM_BUS 0x80000000 +#define CFG_PCI_MEM_PHYS 0x80000000 +#define CFG_PCI_MEM_SIZE 0x7D000000 +#define CFG_ISA_MEM_BUS 0x00000000 +#define CFG_ISA_MEM_PHYS 0xFD000000 +#define CFG_ISA_MEM_SIZE 0x01000000 +#define CFG_PCI_IO_BUS 0x00800000 +#define CFG_PCI_IO_PHYS 0xFE800000 +#define CFG_PCI_IO_SIZE 0x00400000 +#define CFG_ISA_IO_BUS 0x00000000 +#define CFG_ISA_IO_PHYS 0xFE000000 +#define CFG_ISA_IO_SIZE 0x00800000 #define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS -#define CFG_ISA_IO CFG_ISA_IO_PHYS -#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS +#define CFG_ISA_IO CFG_ISA_IO_PHYS +#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS /* @@ -408,12 +421,12 @@ /* * Boot flags * - * BOOTFLAG_COLD - Indicates a power-on boot - * BOOTFLAG_WARM - Indicates a software reset + * BOOTFLAG_COLD - Indicates a power-on boot + * BOOTFLAG_WARM - Indicates a software reset */ -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 #endif /* __CONFIG_H */ diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index d671dccc19b..fb5ae99e4cc 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -169,8 +169,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ @@ -261,13 +260,17 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_NFS */ -/* Add support for a few extra bootp options like: - * - File size - * - DNS + +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS + /* undef this to save memory */ #define CFG_LONGHELP @@ -275,14 +278,20 @@ /* Monitor Command Prompt */ #define CFG_PROMPT "=> " -/* What U-Boot subsytems do you want enabled? */ -#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_REGINFO | \ - CFG_CMD_MEMTEST | \ - CFG_CMD_MII | \ - CFG_CMD_IMMAP) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_CMD_MII +#define CONFIG_CMD_IMMAP + +#undef CONFIG_CMD_KGDB /* Where do the internal registers live? */ @@ -298,13 +307,10 @@ #define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -477,7 +483,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/purple.h b/include/configs/purple.h index 2ecb7fb2bf7..6eb618ed6d3 100644 --- a/include/configs/purple.h +++ b/include/configs/purple.h @@ -81,8 +81,23 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + #define CFG_SDRAM_BASE 0x80000000 diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index e5e27724e18..0e884fc114c 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -102,10 +102,25 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_DHCP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_DHCP + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "bootm 40000" @@ -192,7 +207,7 @@ /* "protect off" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/quantum.h b/include/configs/quantum.h index 21ec5acadef..f49e2b0716e 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -92,18 +92,28 @@ #define CFG_NVRAM_SIZE 2048 -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ #define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" @@ -113,7 +123,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -172,7 +182,7 @@ #endif /*%%% #define CFG_FLASH_BASE 0xFFF00000 */ -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -222,7 +232,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/r5200.h b/include/configs/r5200.h index e1e406bf9b5..fc7658b9f2d 100644 --- a/include/configs/r5200.h +++ b/include/configs/r5200.h @@ -39,13 +39,10 @@ #define CONFIG_M5271 /* define processor type */ #define CONFIG_R5200 /* define board type */ -#define FEC_ENET -#define CONFIG_NET_RETRY_COUNT 5 - -#define CONFIG_IPADDR 192.168.0.172 -#define CONFIG_SERVERIP 192.168.0.148 -#define CONFIG_ETHADDR 00:06:3b:00:44:55 +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CFG_UART_PORT (0) #define CONFIG_BAUDRATE 19200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } @@ -66,10 +63,48 @@ #define CFG_ENV_IS_IN_FLASH 1 #endif -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB)) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_NET + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_LOADB + +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_MULTI 1 +# define CONFIG_MII 1 +# define CFG_DISCOVER_PHY +# define CFG_RX_ETH_BUFFER 8 +# define CFG_FAULT_ECHO_LINK_DOWN + +# define CFG_FEC0_PINMUX 0 +# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE +# define MCFFEC_TOUT_LOOP 50000 +/* If CFG_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CFG_DISCOVER_PHY +# define FECDUPLEX FULL +# define FECSPEED _100BASET +# else +# ifndef CFG_FAULT_ECHO_LINK_DOWN +# define CFG_FAULT_ECHO_LINK_DOWN +# endif +# endif /* CFG_DISCOVER_PHY */ +#endif /* Note: We only copy one sectors worth of application code from location * 10200000 for speed purposes. Increase the size if necessary */ @@ -79,7 +114,7 @@ #define CFG_PROMPT "u-boot> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/rmu.h b/include/configs/rmu.h index b319cf497d3..2ca60b731ea 100644 --- a/include/configs/rmu.h +++ b/include/configs/rmu.h @@ -87,17 +87,28 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ #define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" @@ -108,7 +119,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -152,7 +163,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE (0-flash_info[0].size) /* Put flash at end */ -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -193,7 +204,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 6c9e392c36b..814082ccc63 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -64,8 +64,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */ @@ -102,7 +101,23 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_KGDB) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_KGDB + /* Define this if you want to boot from 0x00000100. If you don't define * this, you will need to program the bootloader to 0xfff00000, and @@ -112,15 +127,12 @@ */ #define CFG_RSD_BOOT_LOW 1 -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTARGS "devfs=mount root=ramfs" #define CONFIG_ETHADDR 08:00:3e:26:0a:5a #define CONFIG_NETMASK 255.255.0.0 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -130,7 +142,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -287,7 +299,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 97b52fa1ae7..c474acd70ec 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -159,8 +159,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC @@ -470,16 +469,18 @@ #define CONFIG_BOOTP_RANDOM_DELAY /* Randomize the BOOTP retry delay */ -/* Add support for a few extra bootp options like: - * - File size - * - DNS (up to 2 servers) - * - Send hostname to DHCP server +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + /* undef this to save memory */ #define CFG_LONGHELP @@ -502,31 +503,28 @@ */ #define CONFIG_VERSION_VARIABLE -/* What U-Boot subsytems do you want enabled? */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_KGDB + #ifdef CONFIG_ETHER_ON_FCC -# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_I2C | \ - CFG_CMD_SPI | \ - CFG_CMD_SDRAM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_IRQ | \ - CFG_CMD_PING | \ - CFG_CMD_MII ) -#else -# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_I2C | \ - CFG_CMD_SPI | \ - CFG_CMD_SDRAM | \ - CFG_CMD_REGINFO | \ - CFG_CMD_IMMAP | \ - CFG_CMD_IRQ | \ - CFG_CMD_PING ) -#endif /* CONFIG_ETHER_ON_FCC */ +#define CONFIG_CMD_MII +#endif + /* Where do the internal registers live? */ #define CFG_IMMR 0xF0000000 @@ -544,10 +542,6 @@ #define CONFIG_SACSng 1 /* munged for the SACSng */ #define CONFIG_CPM2 1 /* Has a CPM2 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - - /* * Miscellaneous configurable options */ @@ -589,7 +583,7 @@ #define CFG_TFTP_TIMEOUT_COUNT 5 /* How many timeouts TFTP will allow */ /* before it gives up. */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -732,7 +726,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index 866f7b04261..b4a063a1d4c 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -82,24 +82,29 @@ #define CONFIG_BAUDRATE 115200 -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - /*CFG_CMD_NAND |*/ \ - /*CFG_CMD_EEPROM |*/ \ - /*CFG_CMD_I2C |*/ \ - /*CFG_CMD_USB |*/ \ - CFG_CMD_REGINFO | \ - CFG_CMD_DATE | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off" @@ -110,7 +115,7 @@ /*#define CONFIG_BOOTFILE "elinos-lart" */ #define CONFIG_BOOTCOMMAND "dhcp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ @@ -193,7 +198,7 @@ /*----------------------------------------------------------------------- * NAND flash settings */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#if defined(CONFIG_CMD_NAND) #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -219,7 +224,7 @@ #define NAND_CTL_CLRCLE(nandptr) #define NAND_CTL_SETCLE(nandptr) /* #undef CONFIG_MTD_NAND_VERIFY_WRITE */ -#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ +#endif /* CONFIG_CMD_NAND */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index beff28ab32f..dc906b15006 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -84,23 +84,33 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SDRAM | \ - 0 ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -123,7 +133,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -229,7 +239,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h index d891e07b314..0e878f054ff 100644 --- a/include/configs/sbc8240.h +++ b/include/configs/sbc8240.h @@ -75,24 +75,33 @@ #define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_ENV | \ - CFG_CMD_FLASH | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_SDRAM | \ - 0 ) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) + +/* + * Command line configuration. */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SDRAM + /* * Miscellaneous configurable options @@ -340,7 +349,7 @@ typedef unsigned int led_id_t; * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 9cf0654be10..b1d41a6d42b 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -182,8 +182,7 @@ * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CFG_CMD_NET must be removed - * from CONFIG_COMMANDS to remove support for networking. + * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. */ #undef CONFIG_ETHER_ON_SCC @@ -412,16 +411,18 @@ "bootm" #endif /* CONFIG_BOOT_ROOT_NFS */ -/* Add support for a few extra bootp options like: - * - File size - * - DNS (up to 2 servers) - * - Send hostname to DHCP server +/* + * BOOTP options */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME) +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + /* undef this to save memory */ #define CFG_LONGHELP @@ -444,27 +445,26 @@ */ #define CONFIG_VERSION_VARIABLE -/* What U-Boot subsytems do you want enabled? */ -#ifdef CONFIG_ETHER_ON_FCC -# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IMMAP | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM ) -#else -# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ASKENV | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IMMAP | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM ) -#endif /* CONFIG_ETHER_ON_FCC */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#undef CONFIG_CMD_KGDB + +#if defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_CMD_MII +#endif + #undef CONFIG_WATCHDOG /* disable the watchdog */ @@ -481,13 +481,11 @@ #define CONFIG_SBC8260 1 /* on an EST SBC8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -627,7 +625,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 65aac5cefd3..e7d8a5a6627 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -313,9 +313,6 @@ #define CONFIG_OF_FLAT_TREE 1 #define CONFIG_OF_BOARD_SETUP 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,8349@0" #define OF_SOC "soc8349@e0000000" #define OF_TBCLK (bd->bi_busfreq / 4) @@ -328,7 +325,7 @@ #define CONFIG_I2C_CMD_TREE #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C1_OFFSET 0x3000 #define CFG_I2C2_OFFSET 0x3100 #define CFG_I2C_OFFSET CFG_I2C2_OFFSET @@ -401,15 +398,17 @@ #define CONFIG_NET_MULTI 1 #endif -#define CONFIG_MPC83XX_TSEC1 1 -#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC83XX_TSEC2 1 -#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define CONFIG_PHY_BCM5421S 1 #define TSEC1_PHY_ADDR 0x19 #define TSEC2_PHY_ADDR 0x1a #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" @@ -439,40 +438,34 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#if defined(CFG_RAMBOOT) -#if defined(CONFIG_PCI) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#else -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C) \ - & \ - ~(CFG_CMD_ENV \ - | CFG_CMD_LOADS)) -#endif -#else + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + #if defined(CONFIG_PCI) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PCI \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - ) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ - ) + #define CONFG_CMD_PCI #endif + +#if defined(CFG_RAMBOOT) + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -483,7 +476,7 @@ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -504,7 +497,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ #endif @@ -655,7 +648,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -666,6 +659,7 @@ #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:a0:1e:a0:13:8d #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:a0:1e:a0:13:8e diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 6e4fdb2498e..defc428819b 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -320,28 +320,37 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + #if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif -#else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) - #elif (defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #endif -#include <cmd_confdefs.h> #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -350,7 +359,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "SBC8560=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -371,7 +380,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -383,7 +392,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h new file mode 100644 index 00000000000..54eac38b86f --- /dev/null +++ b/include/configs/sbc8641d.h @@ -0,0 +1,606 @@ +/* + * Copyright 2007 Wind River Systems <www.windriver.com> + * Copyright 2007 Embedded Specialties, Inc. + * Joe Hamman <joe.hamman@embeddedspecialties.com> + * + * Copyright 2006 Freescale Semiconductor. + * + * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * SBC8641D board configuration file + * + * Make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_MPC86xx 1 /* MPC86xx */ +#define CONFIG_MPC8641 1 /* MPC8641 specific */ +#define CONFIG_SBC8641D 1 /* SBC8641D board specific */ +#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ +#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ + +#ifdef RUN_DIAG +#define CFG_DIAG_ADDR 0xff800000 +#endif + +#define CFG_RESET_ADDRESS 0xfff00100 + +#define CONFIG_PCI 1 /* Enable PCIE */ +#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ + +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CACHE_LINE_INTERLEAVING 0x20000000 +#define PAGE_INTERLEAVING 0x21000000 +#define BANK_INTERLEAVING 0x22000000 +#define SUPER_BANK_INTERLEAVING 0x23000000 + + +#define CONFIG_ALTIVEC 1 + +/* + * L2CR setup -- make sure this is right for your board! + */ +#define CFG_L2 +#define L2_INIT 0 +#define L2_ENABLE (L2CR_L2E) + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) +#endif + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) + +/* + * DDR Setup + */ +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_BASE2 CFG_DDR_SDRAM_BASE2 +#define CONFIG_VERY_BIG_RAM + +#define MPC86xx_DDR_SDRAM_CLK_CNTL + +#if defined(CONFIG_SPD_EEPROM) + /* + * Determine DDR configuration from I2C interface. + */ + #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */ + #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */ + +#else + /* + * Manually set up DDR1 & DDR2 parameters + */ + + #define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ + + #define CFG_DDR_CS0_BNDS 0x0000000F + #define CFG_DDR_CS1_BNDS 0x00000000 + #define CFG_DDR_CS2_BNDS 0x00000000 + #define CFG_DDR_CS3_BNDS 0x00000000 + #define CFG_DDR_CS0_CONFIG 0x80010102 + #define CFG_DDR_CS1_CONFIG 0x00000000 + #define CFG_DDR_CS2_CONFIG 0x00000000 + #define CFG_DDR_CS3_CONFIG 0x00000000 + #define CFG_DDR_EXT_REFRESH 0x00000000 + #define CFG_DDR_TIMING_0 0x00220802 + #define CFG_DDR_TIMING_1 0x38377322 + #define CFG_DDR_TIMING_2 0x002040c7 + #define CFG_DDR_CFG_1A 0x43008008 + #define CFG_DDR_CFG_2 0x24401000 + #define CFG_DDR_MODE_1 0x23c00542 + #define CFG_DDR_MODE_2 0x00000000 + #define CFG_DDR_MODE_CTL 0x00000000 + #define CFG_DDR_INTERVAL 0x05080100 + #define CFG_DDR_DATA_INIT 0x00000000 + #define CFG_DDR_CLK_CTRL 0x03800000 + #define CFG_DDR_CFG_1B 0xC3008008 + + #define CFG_DDR2_CS0_BNDS 0x0010001F + #define CFG_DDR2_CS1_BNDS 0x00000000 + #define CFG_DDR2_CS2_BNDS 0x00000000 + #define CFG_DDR2_CS3_BNDS 0x00000000 + #define CFG_DDR2_CS0_CONFIG 0x80010102 + #define CFG_DDR2_CS1_CONFIG 0x00000000 + #define CFG_DDR2_CS2_CONFIG 0x00000000 + #define CFG_DDR2_CS3_CONFIG 0x00000000 + #define CFG_DDR2_EXT_REFRESH 0x00000000 + #define CFG_DDR2_TIMING_0 0x00220802 + #define CFG_DDR2_TIMING_1 0x38377322 + #define CFG_DDR2_TIMING_2 0x002040c7 + #define CFG_DDR2_CFG_1A 0x43008008 + #define CFG_DDR2_CFG_2 0x24401000 + #define CFG_DDR2_MODE_1 0x23c00542 + #define CFG_DDR2_MODE_2 0x00000000 + #define CFG_DDR2_MODE_CTL 0x00000000 + #define CFG_DDR2_INTERVAL 0x05080100 + #define CFG_DDR2_DATA_INIT 0x00000000 + #define CFG_DDR2_CLK_CTRL 0x03800000 + #define CFG_DDR2_CFG_1B 0xC3008008 + + +#endif + +/* #define CFG_ID_EEPROM 1 +#define ID_EEPROM_ADDR 0x57 */ + +/* + * The SBC8641D contains 16MB flash space at ff000000. + */ +#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */ + +/* Flash */ +#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */ +#define CFG_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */ + +/* 64KB EEPROM */ +#define CFG_BR1_PRELIM 0xf0000801 /* port size 16bit */ +#define CFG_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */ + +/* EPLD - User switches, board id, LEDs */ +#define CFG_BR2_PRELIM 0xf1000801 /* port size 16bit */ +#define CFG_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */ + +/* Local bus SDRAM 128MB */ +#define CFG_BR3_PRELIM 0xe0001861 /* port size ?bit */ +#define CFG_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */ +#define CFG_BR4_PRELIM 0xe4001861 /* port size ?bit */ +#define CFG_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */ + +/* Disk on Chip (DOC) 128MB */ +#define CFG_BR5_PRELIM 0xe8001001 /* port size ?bit */ +#define CFG_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */ + +/* LCD */ +#define CFG_BR6_PRELIM 0xf4000801 /* port size ?bit */ +#define CFG_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ + +/* Control logic & misc peripherals */ +#define CFG_BR7_PRELIM 0xf2000801 /* port size ?bit */ +#define CFG_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 131 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_WRITE_SWAPPED_DATA +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_PROTECTION + +#undef CONFIG_CLOCKS_IN_MHZ + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#ifndef CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ +#else +#define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ +#endif +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree to kernel + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,8641@0" +#define OF_SOC "soc@f8000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@f8000000/serial@4500" + +#define CFG_64BIT_VSPRINTF 1 +#define CFG_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3100 + +/* + * RapidIO MMU + */ +#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ +#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE +#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_IO_BASE 0xe2000000 +#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE +#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ + +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + +#define CFG_PCI2_MEM_BASE 0xa0000000 +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0xe3000000 +#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE +#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ + +#if defined(CONFIG_PCI) + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#undef CFG_SCSI_SCAN_BUS_REVERSE + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CONFIG_DOS_PARTITION +#undef CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SATA_ULI5288 +#define CFG_SCSI_MAX_SCSI_ID 4 +#define CFG_SCSI_MAX_LUN 1 +#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) +#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE +#endif + +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +/* #define CONFIG_MII 1 */ /* MII PHY management */ + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define CONFIG_TSEC4 1 +#define CONFIG_TSEC4_NAME "eTSEC4" + +#define TSEC1_PHY_ADDR 0x1F +#define TSEC2_PHY_ADDR 0x00 +#define TSEC3_PHY_ADDR 0x01 +#define TSEC4_PHY_ADDR 0x02 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 +#define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS TSEC_GIGABIT +#define TSEC4_FLAGS TSEC_GIGABIT + +#define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ + +#define CONFIG_ETHPRIME "eTSEC1" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * BAT0 2G Cacheable, non-guarded + * 0x0000_0000 2G DDR + */ +#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) +#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) +#define CFG_IBAT0U CFG_DBAT0U + +/* + * BAT1 1G Cache-inhibited, guarded + * 0x8000_0000 512M PCI-Express 1 Memory + * 0xa000_0000 512M PCI-Express 2 Memory + * Changed it for operating from 0xd0000000 + */ +#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT1U CFG_DBAT1U + +/* + * BAT2 512M Cache-inhibited, guarded + * 0xc000_0000 512M RapidIO Memory + */ +#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT2U CFG_DBAT2U + +/* + * BAT3 4M Cache-inhibited, guarded + * 0xf800_0000 4M CCSR + */ +#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT3U CFG_DBAT3U + +/* + * BAT4 32M Cache-inhibited, guarded + * 0xe200_0000 16M PCI-Express 1 I/O + * 0xe300_0000 16M PCI-Express 2 I/0 + * Note that this is at 0xe0000000 + */ +#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT4U CFG_DBAT4U + +/* + * BAT5 128K Cacheable, non-guarded + * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) + */ +#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_IBAT5L CFG_DBAT5L +#define CFG_IBAT5U CFG_DBAT5U + +/* + * BAT6 32M Cache-inhibited, guarded + * 0xfe00_0000 32M FLASH + */ +#define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ + | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CFG_IBAT6U CFG_DBAT6U + +#define CFG_DBAT7L 0x00000000 +#define CFG_DBAT7U 0x00000000 +#define CFG_IBAT7L 0x00000000 +#define CFG_IBAT7U 0x00000000 + +/* + * Environment + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ +#define CFG_ENV_SIZE 0x2000 + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#include <config_cmd_default.h> + #define CONFIG_CMD_PING + #define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if defined(CONFIG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if defined(CONFIG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +/* The mac addresses for all ethernet interface */ +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 02:E0:0C:00:00:01 +#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD +#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD +#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD +#endif + +#define CONFIG_HAS_ETH0 1 +#define CONFIG_HAS_ETH1 1 +#define CONFIG_HAS_ETH2 1 +#define CONFIG_HAS_ETH3 1 + +#define CONFIG_IPADDR 192.168.0.50 + +#define CONFIG_HOSTNAME sbc8641d +#define CONFIG_ROOTPATH /opt/eldk/ppc_74xx +#define CONFIG_BOOTFILE uImage + +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_NETMASK 255.255.255.0 + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=uRamdisk\0" \ + "dtbaddr=400000\0" \ + "dtbfile=sbc8641d.dtb\0" \ + "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ + "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ + "maxcpus=1" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr - $dtbaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $dtbaddr $dtbfile;" \ + "bootm $loadaddr $ramdiskaddr $dtbaddr" + +#define CONFIG_FLASHBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "bootm ffd00000 ffb00000 ffa00000" + +#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 6b6acfa8758..cb225369871 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -58,7 +58,7 @@ * 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB) */ -#define CONFIG_SOLIDCARD3 1 +#define CONFIG_SC3 1 #define CONFIG_4xx 1 #define CONFIG_405GP 1 @@ -68,8 +68,7 @@ * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range * If undefined, IDE access uses a seperat emulation with higher access speed. * Consider to inform your Linux IDE driver about the different addresses! - * IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes - * the CFG_CMD_IDE macro! + * IDE_USES_ISA_EMULATION is only used if you define CONFIG_CMD_IDE! */ #define IDE_USES_ISA_EMULATION @@ -134,7 +133,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ #define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n" -#define CONFIG_AUTOBOOT_DELAY_STR "\n" /* 1st "password" */ +#define CONFIG_AUTOBOOT_DELAY_STR "\r" /* 1st "password" */ +#define CONFIG_AUTOBOOT_DELAY_STR2 "\n" /* 1st "password" */ #endif /* @@ -168,25 +168,36 @@ #define CONFIG_MII 1 /* add 405GP MII PHY management */ #define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_PCI | \ - CFG_CMD_IRQ | \ - CFG_CMD_NET | \ - CFG_CMD_MII | \ - CFG_CMD_PING | \ - CFG_CMD_NAND | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_CACHE | \ - CFG_CMD_ELF ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + + +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_PCI +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_NAND +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_ELF + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -276,7 +287,7 @@ * External peripheral base address *----------------------------------------------------------------------- */ -#if !(CONFIG_COMMANDS & CFG_CMD_IDE) +#if !defined(CONFIG_CMD_IDE) #undef CONFIG_IDE_LED /* no led for ide supported */ #undef CONFIG_IDE_RESET /* no reset for ide supported */ @@ -285,7 +296,7 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ -#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ +#else #define CONFIG_START_IDE 1 /* check, if use IDE */ #undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ @@ -345,7 +356,7 @@ #endif /* IDE_USES_ISA_EMULATION */ -#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ +#endif /* #define CFG_KEY_REG_BASE_ADDR 0xF0100000 @@ -436,7 +447,7 @@ extern unsigned long offsetOfEnvironment; #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index d7d07a62fc9..8491d97ae42 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -64,24 +64,37 @@ */ #define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024) - #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NET +#define CONFIG_CMD_EEPROM #define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600" /* #define CONFIG_BOOTCOMMAND "bootm 38000000" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif - /* * Miscellaneous configurable options */ @@ -104,7 +117,6 @@ /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /*----------------------------------------------------------------------- * Physical Memory Map */ @@ -113,8 +125,6 @@ /*----------------------------------------------------------------------- * FLASH and environment organization */ - - #define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ @@ -125,11 +135,9 @@ #define CONFIG_SPI_EEPROM /* Support for SPI EEPROMs (AT25128) */ #define CONFIG_MW_EEPROM /* Support for MicroWire EEPROMs (AT93LC46) */ - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE - /* Environment in EEPROM */ #define CFG_ENV_IS_IN_EEPROM 1 #define CONFIG_SPI @@ -182,6 +190,15 @@ #undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */ /************************************************************ +*SATA/Native Stuff +************************************************************/ +#define CFG_SATA_SUPPORTED 1 +#define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */ +#define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */ +#define CFG_SATA_MAXDEVICES (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS) +#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */ + +/************************************************************ * ATAPI support (experimental) ************************************************************/ #define CONFIG_ATAPI /* enable ATAPI Support */ @@ -200,7 +217,6 @@ #define CONFIG_I8042_KBD #define CFG_ISA_IO 0 - /************************************************************ * RTC ***********************************************************/ diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index a8e355508b1..c6f7f1526c6 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -64,16 +64,34 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_PCMCIA | CFG_CMD_EEPROM) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PCI +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCMCIA +#define CONFIG_CMD_EEPROM + #define CONFIG_BOOTDELAY 15 #define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) " #define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index a4249c47c62..d140241bff4 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -36,20 +36,27 @@ /* - * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if - * neccessary in include/cmd_confdefs.h file. (Un)comment for getting - * functionality or size of u-boot code. + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - & ~CFG_CMD_LOADS \ - & ~CFG_CMD_CONSOLE \ - & ~CFG_CMD_AUTOSCRIPT \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_DHCP \ - ) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_AUTOSCRIPT -#include <cmd_confdefs.h> /* * Boot options. Setting delay to -1 stops autostart count down. @@ -182,7 +189,7 @@ * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_FIRST_SECTOR 5 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index b7f79c26eb9..c2e1386217f 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -37,10 +37,11 @@ #else #define CONFIG_440GRX 1 /* Specific PPC440GRx */ #endif +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ /* Detect Sequoia PLL input clock automatically via CPLD bit */ #define CONFIG_SYS_CLK_FREQ ((in8(CFG_BCSR_BASE + 3) & 0x80) ? \ - 3333333 : 33000000) + 33333333 : 33000000) #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ @@ -58,6 +59,7 @@ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */ #define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_OCM_DATA_ADDR CFG_OCM_BASE #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 @@ -80,7 +82,7 @@ #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR /*----------------------------------------------------------------------- * Serial Port @@ -125,7 +127,7 @@ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -168,12 +170,19 @@ /* * Now the NAND chip has to be defined (no autodetection used!) */ -#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ #define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */ -#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ #undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + #ifdef CFG_ENV_IS_IN_NAND /* * For NAND booting the environment is embedded in the U-Boot image. Please take @@ -290,9 +299,6 @@ /* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE -#define CMD_USB CFG_CMD_USB -#else -#define CMD_USB 0 /* no USB on 440GRx */ #endif /* CONFIG_440EPX */ /* Partitions */ @@ -300,37 +306,73 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DTT | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CMD_USB) -#define CONFIG_SUPPORT_VFAT +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#ifdef CONFIG_440EPX +#define CONFIG_CMD_USB +#endif + +#ifndef CONFIG_RAINIER +#define CFG_POST_FPU_ON CFG_POST_FPU +#else +#define CFG_POST_FPU_ON 0 +#endif + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_UART | \ + CFG_POST_I2C | \ + CFG_POST_CACHE | \ + CFG_POST_FPU_ON | \ + CFG_POST_ETHER | \ + CFG_POST_SPR) + +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0x10000000 /* free virtual address */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + +#define CONFIG_SUPPORT_VFAT /*----------------------------------------------------------------------- * Miscellaneous configurable options *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -358,12 +400,12 @@ *----------------------------------------------------------------------*/ /* General PCI */ #define CONFIG_PCI /* include pci support */ -#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -421,7 +463,7 @@ *----------------------------------------------------------------------*/ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -433,7 +475,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/shannon.h b/include/configs/shannon.h index 572985b051b..c1fa53f1a8a 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -66,21 +66,28 @@ #define CONFIG_BAUDRATE 115200 -#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PCMCIA | \ - CFG_CMD_IDE) -#endif /* 0 */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" #define CONFIG_NETMASK 255.255.0.0 #define CONFIG_BOOTCOMMAND "help" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index a137f9d7c99..05f60537270 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -86,24 +86,32 @@ /* Use s3c2400's RTC */ #define CONFIG_RTC_S3C24X0 1 -#ifndef USE_920T_MMU -#define CONFIG_COMMANDS_tmp ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \ - CFG_CMD_DATE | \ - CFG_CMD_SNTP ) -#else -#define CONFIG_COMMANDS_tmp (CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_SNTP ) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_HWFLOW) + #define CONFIG_CONFIG_HWFLOW #endif -#ifdef CONFIG_HWFLOW -#define CONFIG_COMMANDS (CONFIG_COMMANDS_tmp | CFG_CMD_HWFLOW) -#else -#define CONFIG_COMMANDS CONFIG_COMMANDS_tmp +#if !defined(USE_920T_MMU) + #undef CONFIG_CMD_CACHE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 #if 0 @@ -118,7 +126,7 @@ #define CONFIG_BOOTCOMMAND "tftp; bootm" #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 7edec0db43d..ca404ff452a 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -72,22 +72,26 @@ #define CONFIG_BAUDRATE 115200 -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - /*CFG_CMD_NAND |*/ \ - /*CFG_CMD_EEPROM |*/ \ - /*CFG_CMD_I2C |*/ \ - /*CFG_CMD_USB |*/ \ - CFG_CMD_REGINFO | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF + #define CONFIG_BOOTDELAY 3 /*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ @@ -98,7 +102,7 @@ /*#define CONFIG_BOOTFILE "elinos-lart" */ /*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h index e106b3b5746..ad68c751c89 100644 --- a/include/configs/smmaco4.h +++ b/include/configs/smmaco4.h @@ -42,11 +42,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -65,33 +60,41 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -138,17 +141,17 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) +#if defined(CFG_IPBCLK_EQUALS_XLBCLK) /* * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ -#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif /* @@ -319,7 +322,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -338,9 +341,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -357,7 +364,7 @@ #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#ifdef CFG_PCISPEED_66 +#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2 #define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ #else #define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index 4937638820b..fe014eabcbc 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -39,12 +39,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ - -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -69,30 +63,35 @@ #define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS #define CONFIG_PCI_CFG_SIZE 0x01000000 + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CACHE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP | \ - 0) - -/* CFG_CMD_MII | \ */ -/* CFG_CMD_USB | \ */ - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + /* * Default Environment @@ -268,7 +267,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -284,6 +283,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index 09bbebdce89..2efc8f10ec1 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -31,14 +31,9 @@ #undef CONFIG_8xx_CONS_NONE #define CONFIG_MII -/* #define MII_DEBUG */ -/* #define CONFIG_FEC_ENET */ #undef CONFIG_ETHER_ON_FEC1 #define CONFIG_ETHER_ON_FEC2 #define FEC_ENET -/* #define CONFIG_FEC2_PHY_NORXERR */ -/* #define CFG_DISCOVER_PHY */ -/* #define CONFIG_PHY_ADDR 0x1 */ #define CONFIG_FEC2_PHY 1 #define CONFIG_BAUDRATE 19200 @@ -80,24 +75,31 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ -#ifndef CONFIG_COMMANDS -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_ASKENV \ - | CFG_CMD_DATE \ - | CFG_CMD_ECHO \ - | CFG_CMD_IMMAP \ - | CFG_CMD_JFFS2 \ - | CFG_CMD_PING \ - | CFG_CMD_DHCP \ - | CFG_CMD_I2C \ - | CFG_CMD_MII) - /* & ~( CFG_CMD_NET)) */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#endif /* !CONFIG_COMMANDS */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII /* * Miscellaneous configurable options @@ -107,7 +109,7 @@ #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -194,7 +196,7 @@ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#ifdef CFG_CMD_DATE +#ifdef CONFIG_CMD_DATE # define CONFIG_RTC_DS3231 # define CFG_I2C_RTC_ADDR 0x68 #endif @@ -202,7 +204,7 @@ /*----------------------------------------------------------------------- * I2C configuration */ -#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) /* enable I2C and select the hardware/software driver */ #undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ diff --git a/include/configs/spieval.h b/include/configs/spieval.h index f40dde2ac83..4b618f36a87 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -44,11 +44,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -88,12 +83,6 @@ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ -#ifdef CONFIG_PCI -#define ADD_PCI_CMD CFG_CMD_PCI -#else -#define ADD_PCI_CMD 0 -#endif - /* * Video console */ @@ -110,12 +99,6 @@ #define CFG_CONSOLE_IS_IN_ENV #endif -#ifdef CONFIG_VIDEO -#define ADD_BMP_CMD CFG_CMD_BMP -#else -#define ADD_BMP_CMD 0 -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -124,10 +107,7 @@ /* USB */ #ifdef CONFIG_STK52XX #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0 #endif /* POST support */ @@ -136,43 +116,60 @@ CFG_POST_I2C) #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG /* preserve space for the post_word at end of on-chip SRAM */ #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#else -#define CFG_CMD_POST_DIAG 0 #endif -/* IDE */ -#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) -#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) -#else -#define ADD_IDE_CMD 0 -#endif /* - * Supported commands + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - ADD_BMP_CMD | \ - ADD_IDE_CMD | \ - ADD_PCI_CMD | \ - ADD_USB_CMD | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) + #define CONFIG_CMD_IDE + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_STK52XX + #define CONFIG_CMD_USB + #define CONFIG_CMD_FAT +#endif + +#ifdef CONFIG_VIDEO + #define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_PCI + #define CONFIG_CMD_PCI +#endif + +#ifdef CONFIG_POST +#define CONFIG_CMD_DIAG +#endif + #define CONFIG_TIMESTAMP /* display image timestamps */ @@ -219,17 +216,17 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#if defined(CFG_IPBSPEED_133) +#if defined(CFG_IPBCLK_EQUALS_XLBCLK) /* * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ -#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif /* @@ -406,7 +403,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -425,9 +422,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -444,7 +445,7 @@ #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#ifdef CFG_PCISPEED_66 +#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2 #define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ #else #define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 625cf20144f..c5ae0cde361 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -230,16 +230,17 @@ #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" -#undef CONFIG_MPS85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ @@ -298,34 +299,38 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \ - CFG_CMD_MII | CFG_CMD_I2C ) & \ - ~(CFG_CMD_ENV)) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \ - CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C) - #endif + #define CONFIG_CMD_ELF +#endif + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI #endif -#include <cmd_confdefs.h> + +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -334,7 +339,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "GPPP=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -355,7 +360,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -367,13 +372,14 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 8624f4b74b8..b41dafaf986 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -42,20 +42,20 @@ #define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/ -#undef CONFIG_PCI /* pci ethernet support */ -#define CONFIG_TSEC_ENET /* tsec ethernet support*/ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ +#define CONFIG_PCI /* PCI ethernet support */ +#define CONFIG_TSEC_ENET /* tsec ethernet support*/ +#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ /* sysclk for MPC85xx */ -#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ +#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ /* Blinkin' LEDs for Robert :-) */ @@ -64,36 +64,40 @@ /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#undef CFG_DRAM_TEST /* memory test, takes time */ -#define CFG_MEMTEST_START 0x00200000 /* memtest region */ -#define CFG_MEMTEST_END 0x00400000 +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest region */ +#define CFG_MEMTEST_END 0x00400000 -/* Localbus connector. There are many options that can be +/* Localbus connector. There are many options that can be * connected here, including sdram or lots of flash. * This address, however, is used to configure a 256M local bus * window that includes the Config latch below. */ -#define CFG_LBC_OPTION_BASE 0xf0000000 /* Localbus Extension */ +#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */ #define CFG_LBC_OPTION_SIZE 256 /* 256MB */ /* There are various flash options used, we configure for the largest, * which is 64Mbytes. The CFI works fine and will discover the proper * sizes. */ -#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH 64M */ -#define CFG_BR0_PRELIM 0xFC001801 /* port size 32bit */ -#define CFG_OR0_PRELIM 0xFC000FF7 /* 64 MB Flash */ +#ifdef CONFIG_STXSSA_4M +#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */ +#else +#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */ +#endif +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */ +#define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7) #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 -#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ #define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -104,24 +108,24 @@ /* The configuration latch is Chip Select 1. * It's an 8-bit latch in the lower 8 bits of the word. */ -#define CFG_LBC_CFGLATCH_BASE 0xfb000000 /* Base of config latch */ -#define CFG_BR1_PRELIM 0xfb001801 /* 32-bit port */ -#define CFG_OR1_PRELIM 0xffff0ff7 /* 64K is enough */ +#define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */ +#define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */ +#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */ -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #else -#undef CFG_RAMBOOT +#undef CFG_RAMBOOT #endif #ifdef CFG_RAMBOOT -#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */ +#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */ #else -#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #endif -#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ +#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ @@ -136,14 +140,14 @@ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */ +#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */ #undef CONFIG_CLOCKS_IN_MHZ /* local bus definitions */ -#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */ +#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */ #define CFG_OR2_PRELIM 0xfc006901 -#define CFG_LBC_LCRR 0x00030004 /* local bus freq */ +#define CFG_LBC_LCRR 0x00030004 /* local bus freq */ #define CFG_LBC_LBCR 0x00000000 #define CFG_LBC_LSRT 0x20000000 #define CFG_LBC_MRTPR 0x20000000 @@ -154,52 +158,52 @@ #define CFG_LBC_LSDMR_5 0x4061b723 #define CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_LOCK 1 -#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ /* Serial Port */ #define CONFIG_CONS_INDEX 2 #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_NS16550 #define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_REG_SIZE 1 #define CFG_NS16550_CLK get_bus_freq(0) #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} -#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) -#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CFG_HUSH_PARSER 1 /* Use the HUSH parser */ -#ifdef CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #endif /* I2C */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #if 0 -#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */ #else /* I did the 'if 0' so we could keep the syntax above if ever needed. */ #undef CFG_I2C_NOPROBES #endif #define CFG_I2C_OFFSET 0x3000 -/* I2C EEPROM. AT24C32, we keep our environment in here. +/* I2C EEPROM. AT24C32, we keep our environment in here. */ #define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */ #define CFG_I2C_EEPROM_ADDR_LEN 2 @@ -226,49 +230,50 @@ #define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ #if defined(CONFIG_PCI) /* PCI Ethernet card */ - +#define CONFIG_MPC85XX_PCI2 1 #define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP +#define CONFIG_EEPRO100 +#define CONFIG_TULIP #if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ + #define PCI_ENET0_IOADDR 0xe0000000 + #define PCI_ENET0_MEMADDR 0xe0000000 + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ #endif -#undef CONFIG_PCI_SCAN_SHOW -#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +#define CONFIG_PCI_SCAN_SHOW +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ #endif /* CONFIG_PCI */ #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MPC85XX_TSEC1 1 -#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" -#define CONFIG_MPC85XX_TSEC2 1 -#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" -#undef CONFIG_MPS85XX_FEC +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ -#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 2 /* which channel for ether */ +#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */ +#undef CONFIG_ETHER_NONE /* define if ether on something else */ +#define CONFIG_ETHER_INDEX 2 /* which channel for ether */ #if (CONFIG_ETHER_INDEX == 2) /* @@ -277,19 +282,19 @@ * - Select bus for bd/buffers * - Full duplex */ - #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - #define CFG_CPMFCR_RAMTYPE 0 + #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) + #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) + #define CFG_CPMFCR_RAMTYPE 0 #if 0 - #define CFG_FCC_PSMR (FCC_PSMR_FDE) + #define CFG_FCC_PSMR (FCC_PSMR_FDE) #else - #define CFG_FCC_PSMR 0 + #define CFG_FCC_PSMR 0 #endif #define FETH2_RST 0x01 #elif (CONFIG_ETHER_INDEX == 3) /* need more definitions here for FE3 */ #define FETH3_RST 0x80 -#endif /* CONFIG_ETHER_INDEX */ +#endif /* CONFIG_ETHER_INDEX */ /* MDIO is done through the TSEC0 control. */ @@ -300,17 +305,20 @@ /* Environment - default config is in flash, see below */ #if 0 /* in EEPROM */ -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0 -#define CFG_ENV_SIZE 2048 +# define CFG_ENV_IS_IN_EEPROM 1 +# define CFG_ENV_OFFSET 0 +# define CFG_ENV_SIZE 2048 #else /* in flash */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SECT_SIZE 0x40000 - -#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x4000 -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +# define CFG_ENV_IS_IN_FLASH 1 +# ifdef CONFIG_STXSSA_4M +# define CFG_ENV_SECT_SIZE 0x20000 +# else /* default configuration - 64 MiB flash */ +# define CFG_ENV_SECT_SIZE 0x40000 +# endif +# define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) +# define CFG_ENV_SIZE 0x4000 +# define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) +# define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -318,34 +326,39 @@ #define CONFIG_TIMESTAMP /* Print image info with ts */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C + +#if defined(CONFIG_PCI) + #define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) + #define CONFIG_CMD_MII +#endif + #if defined(CFG_RAMBOOT) - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV | \ - CFG_CMD_LOADS )) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \ - CFG_CMD_MII | CFG_CMD_I2C ) & \ - ~(CFG_CMD_ENV)) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_PING | CFG_CMD_I2C) & \ - ~(CFG_CMD_ENV)) - #endif + #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_LOADS #else - #if defined(CONFIG_PCI) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \ - CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C) - #elif defined(CONFIG_TSEC_ENET) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \ - CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C) - #elif defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \ - CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C) - #endif + #define CONFIG_CMD_ELF #endif -#include <cmd_confdefs.h> + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -354,7 +367,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "SSA=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -375,7 +388,7 @@ /* Cache Configuration */ #define CFG_DCACHE_SIZE 32768 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -387,13 +400,14 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) +#define CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:e0:0c:07:9b:8a #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b @@ -408,13 +422,13 @@ */ #ifdef CFG_ENV_IS_IN_EEPROM /* use restricted "standard" environment */ -#define CONFIG_BAUDRATE 38400 +#define CONFIG_BAUDRATE 38400 #define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */ #define CONFIG_BOOTCOMMAND "bootm 0xffc00000 0xffd00000" #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,$baudrate" #define CONFIG_SERVERIP 192.168.85.1 -#define CONFIG_IPADDR 192.168.85.60 +#define CONFIG_IPADDR 192.168.85.60 #define CONFIG_GATEWAYIP 192.168.85.1 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_HOSTNAME STX_SSA @@ -424,7 +438,7 @@ #else /* ENV IS IN FLASH -- use a full-blown envionment */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 614a046105c..b035857dcea 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -77,7 +77,16 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_NISDOMAIN + #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION @@ -100,19 +109,22 @@ #define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_NAND | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_MII | \ - CFG_CMD_NFS) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + #define CONFIG_BOARD_EARLY_INIT_F 1 #define CONFIG_MISC_INIT_R -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -122,7 +134,7 @@ #define CFG_HUSH_PARSER 1 #define CFG_PROMPT_HUSH_PS2 "> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -213,7 +225,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif @@ -580,9 +592,6 @@ typedef unsigned int led_id_t; /* pass open firmware flat tree */ #define CONFIG_OF_FLAT_TREE 1 -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - #define OF_CPU "PowerPC,MPC870@0" #define OF_TBCLK (MPC8XX_HZ / 16) #define CONFIG_OF_HAS_BD_T 1 diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index 82245558961..08ac9cbd58b 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -55,10 +55,21 @@ #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0) -#define CONFIG_COMMANDS (CONFIG__CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #define CFG_UART1_BASE (0xFFFF2000) #define CONFIG_SERIAL_BASE CFG_UART1_BASE diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 92ee8cb3331..3b90f3ceb1d 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -125,22 +125,32 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DOC | \ -/* CFG_CMD_IDE |*/ \ - CFG_CMD_DATE ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DOC +#define CONFIG_CMD_DATE + + #define CFG_NAND_LEGACY /* @@ -153,7 +163,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -246,7 +256,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/taihu.h b/include/configs/taihu.h new file mode 100644 index 00000000000..d623e56009a --- /dev/null +++ b/include/configs/taihu.h @@ -0,0 +1,476 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2005-2007 + * Beijing UD Technology Co., Ltd., taihusupport@amcc.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +#define CONFIG_405EP 1 /* this is a PPC405 CPU */ +#define CONFIG_4xx 1 /* member of PPC4xx family */ +#define CONFIG_TAIHU 1 /* on a taihu board */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f */ + +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +#define CONFIG_NO_SERIAL_EEPROM + +/*----------------------------------------------------------------------------*/ +#ifdef CONFIG_NO_SERIAL_EEPROM + +/* +!------------------------------------------------------------------------------- +! PLL settings for 333MHz CPU, 111MHz PLB/SDRAM, 55MHz EBC, 33MHz PCI, +! assuming a 33MHz input clock to the 405EP from the C9531. +!------------------------------------------------------------------------------- +*/ +#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_3) +#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) +#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_1) +#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) + +#define PLLMR0_DEFAULT PLLMR0_333_111_55_37 +#define PLLMR1_DEFAULT PLLMR1_333_111_55_37 +#define PLLMR0_DEFAULT_PCI66 PLLMR0_333_111_55_111 +#define PLLMR1_DEFAULT_PCI66 PLLMR1_333_111_55_111 + +#endif +/*----------------------------------------------------------------------------*/ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootfile=/tftpboot/taihu/uImage\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/taihu/u-boot.bin\0" \ + "update=protect off FFFC0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \ + "cp.b 200000 FFFC0000 40000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x14 /* PHY address */ +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SPI + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#undef CONFIG_SPD_EEPROM /* use SPD EEPROM for setup */ +#define CFG_SDRAM_SIZE_PER_BANK 0x04000000 /* 64MB */ +#define CFG_SDRAM_BANKS 2 + +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ + +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +/* + * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CFG_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CFG_BASE_BAUD 691200 + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_UART1_CONSOLE 1 + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_NOPROBES { 0x69 } /* avoid iprobe hangup (why?) */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ + +#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ + +#define CONFIG_SOFT_SPI +#define SPI_SCL spi_scl +#define SPI_SDA spi_sda +#define SPI_READ spi_read() +#define SPI_DELAY udelay(2) +#ifndef __ASSEMBLY__ +void spi_scl(int); +void spi_sda(int); +unsigned char spi_read(void); +#endif + +/* standard dtt sensor configuration */ +#define CONFIG_DTT_DS1775 1 +#define CONFIG_DTT_SENSORS { 0 } + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + /* resource configuration */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */ +#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ +#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ +#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ +#define CONFIG_EEPRO100 1 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2aa +#define CFG_FLASH_WORD_SIZE unsigned short + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif /* CFG_ENV_IS_IN_FLASH */ + +/*----------------------------------------------------------------------- + * NVRAM organization + */ +#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ +#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */ + +#ifdef CFG_ENV_IS_IN_NVRAM +#define CFG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ +#define CFG_ENV_ADDR \ + (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env*/ +#endif + +/*----------------------------------------------------------------------- + * PPC405 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast SPI CS */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 SPI SCLK */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 SPI DI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 SPI DO */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 PCI INTA */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 PCI INTB */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 PCI INTC */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 PCI INTD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 USB */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 EBC */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 unused */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD UART1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx UART0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 User LED1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 User LED2 */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */ +#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0xFC000000 /* FLASH bank #1 */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash/SRAM) initialization */ +#define CFG_EBC_PB0AP 0x03815600 +#define CFG_EBC_PB0CR 0xFFE3A000 /* BAS=0xFFE,BS=2MB,BU=R/W,BW=16bit */ + +/* Memory Bank 1 (NVRAM/RTC) initialization */ +#define CFG_EBC_PB1AP 0x05815600 +#define CFG_EBC_PB1CR 0xFC0BA000 /* BAS=0xFc0,BS=32MB,BU=R/W,BW=16bit */ + +/* Memory Bank 2 (USB device) initialization */ +#define CFG_EBC_PB2AP 0x03016600 +#define CFG_EBC_PB2CR 0x50018000 /* BAS=0x500,BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 3 (LCM and D-flip-flop) initialization */ +#define CFG_EBC_PB3AP 0x158FF600 +#define CFG_EBC_PB3CR 0x50118000 /* BAS=0x501,BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 4 (not install) initialization */ +#define CFG_EBC_PB4AP 0x158FF600 +#define CFG_EBC_PB4CR 0x5021A000 + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * GPIO0[0] - External Bus Controller BLAST output + * GPIO0[1-9] - Instruction trace outputs + * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs + * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[24-27] - UART0 control signal inputs/outputs + * GPIO0[28-29] - UART1 data signal input/output + * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs + */ +#define CFG_GPIO0_OSRH 0x15555550 /* output select high/low */ +#define CFG_GPIO0_OSRL 0x00000110 +#define CFG_GPIO0_ISR1H 0x00000001 /* input select high/low */ +#define CFG_GPIO0_ISR1L 0x15545440 +#define CFG_GPIO0_TSRH 0x00000000 /* three-state select high/low */ +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xFFFE8117 /* three-state control */ +#define CFG_GPIO0_ODR 0x00000000 /* open drain */ + +#define GPIO0 0 /* GPIO controller 0 */ + +/* the GPIO macros in include/ppc405.h for High/Low registers are backwards */ + +#define GPIOx_OSL (GPIO0_OSRH-GPIO_BASE) +#define GPIOx_TSL (GPIO0_TSRH-GPIO_BASE) +#define GPIOx_IS1L (GPIO0_ISR1H-GPIO_BASE) +#define GPIOx_IS2L (GPIO0_ISR1H-GPIO_BASE) +#define GPIOx_IS3L (GPIO0_ISR1H-GPIO_BASE) + +#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO output select */ +#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO three-state select */ +#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO input select */ +#define GPIO_IS2(x) (x+GPIOx_IS1L) +#define GPIO_IS3(x) (x+GPIOx_IS1L) + +#define CPLD_REG0_ADDR 0x50100000 +#define CPLD_REG1_ADDR 0x50100001 +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 2b28f93a071..baa4fbd312b 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -30,6 +30,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_TAISHAN 1 /* Board is taishan */ #define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ @@ -217,8 +218,8 @@ #define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_NET_MULTI 1 -#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ -#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ +#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ +#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ #define CONFIG_PHY2_ADDR 0x1 #define CONFIG_PHY3_ADDR 0x3 #define CONFIG_ET1011C_PHY 1 @@ -233,27 +234,36 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ -/*----------------------------------------------------------------------- - * Console/Commands/Parser - *----------------------------------------------------------------------*/ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_DTT | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -262,7 +272,7 @@ *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -297,7 +307,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ @@ -315,7 +324,7 @@ *----------------------------------------------------------------------*/ #define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -327,7 +336,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h index dac1eb736d8..a21af219a7e 100644 --- a/include/configs/tb0229.h +++ b/include/configs/tb0229.h @@ -87,13 +87,27 @@ /*#define CONFIG_BOOTCOMMAND "run flash_local" */ #define CONFIG_BOOTCOMMAND "run netboot" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_PCI | \ - CFG_CMD_ELF ) -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_PCI +#define CONFIG_CMD_ELF + /* * Miscellaneous configurable options diff --git a/include/configs/trab.h b/include/configs/trab.h index a2dc8e7bff8..b9088a89abd 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -80,10 +80,17 @@ #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* USB stuff */ -#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_OHCI_NEW 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_DOS_PARTITION 1 +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 + +#define CFG_USB_OHCI_REGS_BASE 0x14200000 +#define CFG_USB_OHCI_SLOT_NAME "s3c2400" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 + /* * Size of malloc() pool */ @@ -130,60 +137,50 @@ /* Use s3c2400's RTC */ #define CONFIG_RTC_S3C24X0 1 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + #ifdef CONFIG_HWFLOW -#define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW -#else -#define CONFIG_COMMANDS_ADD_HWFLOW 0 + #define CONFIG_CMD_HWFLOW #endif #ifdef CONFIG_VFD -#define CONFIG_COMMANDS_ADD_VFD CFG_CMD_VFD -#else -#define CONFIG_COMMANDS_ADD_VFD 0 + #define CONFIG_CMD_VFD #endif #ifdef CONFIG_DRIVER_S3C24X0_I2C -#define CONFIG_COMMANDS_ADD_EEPROM CFG_CMD_EEPROM -#define CONFIG_COMMANDS_I2C CFG_CMD_I2C -#else -#define CONFIG_COMMANDS_ADD_EEPROM 0 -#define CONFIG_COMMANDS_I2C 0 + #define CONFIG_CMD_EEPROM + #define CONFIG_CMD_I2C #endif #ifndef USE_920T_MMU -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \ - CONFIG_COMMANDS_ADD_HWFLOW | \ - CONFIG_COMMANDS_ADD_VFD | \ - CONFIG_COMMANDS_ADD_EEPROM | \ - CONFIG_COMMANDS_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB ) -#else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CONFIG_COMMANDS_ADD_HWFLOW | \ - CONFIG_COMMANDS_ADD_VFD | \ - CONFIG_COMMANDS_ADD_EEPROM | \ - CONFIG_COMMANDS_I2C | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP | \ - CFG_CMD_USB ) + #undef CONFIG_CMD_CACHE #endif + /* moved up */ #define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - #define CONFIG_BOOTDELAY 5 #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ #define CONFIG_PREBOOT "echo;echo *** booting ***;echo" @@ -296,7 +293,7 @@ #define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ @@ -422,6 +419,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /* Initial value of the on-board touch screen brightness */ #define CFG_BRIGHTNESS 0x20 diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h new file mode 100644 index 00000000000..84998d4392a --- /dev/null +++ b/include/configs/trizepsiv.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2007 + * Stefano Babic, DENX Gmbh, sbabic@denx.de + * + * (C) Copyright 2004 + * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Configuation settings for the LUBBOCK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ + +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ + +#define CONFIG_MMC 1 +#define BOARD_LATE_INIT 1 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define RTC + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL_MULTI +#define CONFIG_FFUART 1 /* we use FFUART on Conxs */ +#define CONFIG_BTUART 1 /* we use BTUART on Conxs */ +#define CONFIG_STUART 1 /* we use STUART on Conxs */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_DOS_PARTITION 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMLS +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_SERVERIP 192.168.1.99 +#define CONFIG_BOOTCOMMAND "run boot_flash" +#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ + " rw root=/dev/ram initrd=0xa0800000,5m" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "program_boot_mmc=" \ + "mw.b 0xa0010000 0xff 0x20000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 u-boot.bin; " \ + "then " \ + "protect off 0x0 0x1ffff; " \ + "erase 0x0 0x1ffff; " \ + "cp.b 0xa0010000 0x0 0x20000; " \ + "fi\0" \ + "program_uzImage_mmc=" \ + "mw.b 0xa0010000 0xff 0x180000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 uzImage; " \ + "then " \ + "protect off 0x40000 0x1bffff; " \ + "erase 0x40000 0x1bffff; " \ + "cp.b 0xa0010000 0x40000 0x180000; " \ + "fi\0" \ + "program_ramdisk_mmc=" \ + "mw.b 0xa0010000 0xff 0x500000; " \ + "if mmcinit && " \ + "fatload mmc 0 0xa0010000 ramdisk.gz; " \ + "then " \ + "protect off 0x1c0000 0x6bffff; " \ + "erase 0x1c0000 0x6bffff; " \ + "cp.b 0xa0010000 0x1c0000 0x500000; " \ + "fi\0" \ + "boot_mmc=" \ + "if mmcinit && " \ + "fatload mmc 0 0xa0030000 uzImage && " \ + "fatload mmc 0 0xa0800000 ramdisk.gz; " \ + "then " \ + "bootm 0xa0030000; " \ + "fi\0" \ + "boot_flash=" \ + "cp.b 0x1c0000 0xa0800000 0x500000; " \ + "bootm 0x40000\0" \ + +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +/* #define CONFIG_INITRD_TAG 1 */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ + +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_MMC_BASE 0xF0000000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0x00018000 +#define CFG_GPSR1_VAL 0x00000000 +#define CFG_GPSR2_VAL 0x400dc000 +#define CFG_GPSR3_VAL 0x00000000 +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPCR3_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x00018000 +#define CFG_GPDR1_VAL 0x00028801 +#define CFG_GPDR2_VAL 0x520dc000 +#define CFG_GPDR3_VAL 0x0001E000 +#define CFG_GAFR0_L_VAL 0x801c0000 +#define CFG_GAFR0_U_VAL 0x00000013 +#define CFG_GAFR1_L_VAL 0x6990100A +#define CFG_GAFR1_U_VAL 0x00000008 +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x010900F2 +#define CFG_GAFR3_L_VAL 0x54000003 +#define CFG_GAFR3_U_VAL 0x00002401 +#define CFG_GRER0_VAL 0x00000000 +#define CFG_GRER1_VAL 0x00000000 +#define CFG_GRER2_VAL 0x00000000 +#define CFG_GRER3_VAL 0x00000000 +#define CFG_GFER0_VAL 0x00000000 +#define CFG_GFER1_VAL 0x00000000 +#define CFG_GFER2_VAL 0x00000000 +#define CFG_GFER3_VAL 0x00000020 + + +#define CFG_PSSR_VAL 0x20 /* CHECK */ + +/* + * Clock settings + */ +#define CFG_CKEN 0x01FFFFFF /* CHECK */ +#define CFG_CCCR 0x02000290 /* 520Mhz */ + +/* + * Memory settings + */ + +#define CFG_MSC0_VAL 0x4df84df0 +#define CFG_MSC1_VAL 0x7ff87ff4 +#define CFG_MSC2_VAL 0xa26936d4 +#define CFG_MDCNFG_VAL 0x880009C9 +#define CFG_MDREFR_VAL 0x20ca201e +#define CFG_MDMRS_VAL 0x00220022 + +#define CFG_FLYCNFG_VAL 0x00000000 +#define CFG_SXCNFG_VAL 0x40044004 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000001 +#define CFG_MCMEM0_VAL 0x00004204 +#define CFG_MCMEM1_VAL 0x00010204 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00008407 +#define CFG_MCIO1_VAL 0x0000c108 + +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x08000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004) +/* #define CONFIG_DM9000_USE_8BIT */ +/* #define CONFIG_DM9000_USE_16BIT */ +#define CONFIG_DM9000_USE_32BIT + +#define CONFIG_USB_OHCI_NEW 1 +#define CFG_USB_OHCI_BOARD_INIT 1 +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 +#define CFG_USB_OHCI_REGS_BASE 0x4C000000 +#define CFG_USB_OHCI_SLOT_NAME "trizepsiv" +#define CONFIG_USB_STORAGE 1 +#define CFG_USB_OHCI_CPU_INIT 1 + +/* + * FLASH and environment organization + */ + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER 1 + +#define CFG_MONITOR_BASE 0 +#define CFG_MONITOR_LEN 0x40000 + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* write flash less slowly */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +/* Flash environment locations */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#endif /* __CONFIG_H */ diff --git a/include/configs/uc100.h b/include/configs/uc100.h index c4e629ade2b..92148e20543 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -98,7 +98,15 @@ #undef CONFIG_STATUS_LED /* no status-led */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -117,32 +125,32 @@ CFG_POST_SPR ) #undef CONFIG_POST + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SNTP + #ifdef CONFIG_POST -#define CFG_CMD_POST_DIAG CFG_CMD_DIAG -#else -#define CFG_CMD_POST_DIAG 0 +#define CONFIG_CMD_DIAG #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_MII | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP ) #define CONFIG_NETCONSOLE -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ @@ -156,7 +164,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -246,7 +254,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/uc101.h b/include/configs/uc101.h index 8cd8e9be709..aed80ec1e51 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -38,11 +38,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* @@ -55,25 +50,34 @@ /* Partitions */ #define CONFIG_DOS_PARTITION + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DATE | \ - CFG_CMD_DISPLAY | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_DTT | \ - CFG_CMD_IDE | \ - CFG_CMD_FAT | \ - CFG_CMD_NFS | \ - CFG_CMD_MII | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DTT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NFS +#define CONFIG_CMD_MII +#define CONFIG_CMD_SNTP + #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ @@ -114,7 +118,7 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* * I2C configuration @@ -245,7 +249,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -264,9 +268,13 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* - * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, - * which is normally part of the default commands (CFV_CMD_DFL) + * Enable loopw command. */ #define CONFIG_LOOPW @@ -324,7 +332,6 @@ #define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ #define CONFIG_IDE_PREINIT 1 -/* #define CONFIG_IDE_RESET 1 beispile siehe tqm5200.c */ #define CFG_ATA_IDE0_OFFSET 0x0000 diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index e5d4397d2c7..cd00c49fc22 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -86,18 +86,36 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" #define CONFIG_ENV_OVERWRITE -#define CONFIG_COMMANDS (CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \ - | CFG_CMD_FLASH | CFG_CMD_MEMORY \ - | CFG_CMD_ENV | CFG_CMD_CONSOLE \ - | CFG_CMD_LOADS | CFG_CMD_LOADB \ - | CFG_CMD_IMI | CFG_CMD_CACHE \ - | CFG_CMD_REGINFO | CFG_CMD_NET\ - | CFG_CMD_DHCP | CFG_CMD_I2C \ - | CFG_CMD_DATE) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. */ -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_ENV +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_DATE /* @@ -403,7 +421,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif diff --git a/include/configs/v37.h b/include/configs/v37.h index a2e99b59e2a..04072534810 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -76,16 +76,30 @@ #define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_DATE + /* * JFFS2 partitions @@ -105,15 +119,12 @@ #define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)" */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -194,7 +205,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/v38b.h b/include/configs/v38b.h index e19591d2993..c0b1a15e6b2 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -46,11 +46,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -89,28 +84,37 @@ #define CONFIG_USB_CLOCK 0x0001BBBB #define CONFIG_USB_CONFIG 0x00001000 + /* - * Supported commands + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_SDRAM | \ - CFG_CMD_DATE | \ - CFG_CMD_USB | \ - CFG_CMD_FAT) +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_DATE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT + + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ /* * Boot low with 16 MB Flash @@ -167,7 +171,7 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #endif /* @@ -254,7 +258,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -270,6 +274,11 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 16db43bb938..d2501501276 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -96,14 +96,29 @@ #define CFG_SERIAL0 0x101F1000 #define CFG_SERIAL1 0x101F2000 -#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV) -/*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */ +/* + * Command line configuration. + */ + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_BDI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=25,0,0xf1010000,0xf1010010,eth0" diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 06d8536ec31..edae6f4b984 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -89,34 +89,38 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#ifdef CONFIG_SPLASH_SCREEN -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#else -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_SPLASH_SCREEN) + #define CONFIG_CMD_BMP #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options @@ -131,7 +135,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -203,6 +207,8 @@ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ + /*----------------------------------------------------------------------- * Hardware Information Block */ @@ -214,7 +220,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 4e97b01aa1a..7cab31dee4d 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -131,33 +131,38 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#ifdef VOICEBLUE_SMALL_FLASH -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_LOADB | \ - CFG_CMD_IMI | \ - CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_RUN) -#else -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_LOADB | \ - CFG_CMD_IMI | \ - CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_ENV | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_JFFS2) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + +#if !defined(VOICEBLUE_SMALL_FLASH) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_JFFS2 #endif -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + + #define CONFIG_LOOPW #ifdef VOICEBLUE_SMALL_FLASH @@ -220,8 +225,6 @@ #endif /* VOICEBLUE_SMALL_FLASH */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> /* * Miscellaneous configurable options diff --git a/include/configs/walnut.h b/include/configs/walnut.h index b34dc71d23f..180549efad3 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -98,26 +98,38 @@ #define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -128,7 +140,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -283,7 +295,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -340,7 +352,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index 47251bbb641..c67b3012276 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -36,18 +36,24 @@ /* - * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if - * neccessary in include/cmd_confdefs.h file. (Un)comment for getting - * functionality or size of u-boot code. + * BOOTP options */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - & ~CFG_CMD_NET \ - & ~CFG_CMD_LOADS \ - & ~CFG_CMD_CONSOLE \ - & ~CFG_CMD_AUTOSCRIPT \ -/* | CFG_CMD_JFFS2 */ \ - ) -#include <cmd_confdefs.h> +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_AUTOSCRIPT + /* * Boot options. Setting delay to -1 stops autostart count down. @@ -152,7 +158,7 @@ * Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. - * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_FIRST_SECTOR 5 diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 10397628301..7418986caac 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -64,15 +64,29 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_DTT) | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_NFS | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_DTT + #define CONFIG_ETHADDR 08:00:3e:26:0a:5b #define CONFIG_NETMASK 255.255.255.0 @@ -86,7 +100,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 825bfd14e93..bcd16ec5da0 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -81,14 +81,26 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C + #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index dc702cf4458..5733933d616 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -102,10 +102,26 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_PING | CFG_CMD_JFFS2) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_PING +#define CONFIG_CMD_JFFS2 + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index a2f48102f0c..35001d7ada3 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -118,25 +118,39 @@ #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) -#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_IRQ |\ - CFG_CMD_BDI |\ - CFG_CMD_NET |\ - CFG_CMD_IMI |\ - CFG_CMD_ECHO |\ - CFG_CMD_CACHE |\ - CFG_CMD_RUN |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_ASKENV |\ - CFG_CMD_LOADS |\ - CFG_CMD_LOADB |\ - CFG_CMD_MISC |\ - CFG_CMD_PING \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_NET +#define CONFIG_CMD_IMI +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MISC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_PING + /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " @@ -163,12 +177,12 @@ "base 0;" \ "echo" - /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE 0xCF000000 -#define CFG_SYSTEMACE_WIDTH 16 -#define CONFIG_DOS_PARTITION*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION #endif /* __CONFIG_H */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index b68ae54b94d..6a5b7f1eaac 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -38,6 +38,7 @@ #define CONFIG_440GR 1 /* Specific PPC440GR support */ #define CONFIG_HOSTNAME yellowstone #endif +#define CONFIG_440 1 /* ... PPC440 family */ #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ @@ -122,7 +123,7 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -232,17 +233,20 @@ #ifdef CONFIG_440EP /* USB */ -#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE +#define CFG_OHCI_BE_CONTROLLER + +#undef CFG_USB_OHCI_BOARD_INIT +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE (CFG_PERIPHERAL_BASE | 0x1000) +#define CFG_USB_OHCI_SLOT_NAME "ppc440" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 /* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE -#define CMD_USB (CFG_CMD_USB | CFG_CMD_FAT | CFG_CMD_EXT2) - #define CONFIG_SUPPORT_VFAT -#else -#define CMD_USB 0 /* no USB on 440GR */ #endif /* CONFIG_440EP */ #ifdef DEBUG @@ -251,32 +255,49 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#ifdef CONFIG_440EP + #define CONFIG_CMD_USB + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -311,7 +332,6 @@ #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT #define CFG_PCI_MASTER_INIT @@ -344,7 +364,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -356,7 +376,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 7f8b0228aec..74033b4aef4 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -46,7 +46,6 @@ #define EXTCLK_83 83333333 #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS #undef CONFIG_STRESS @@ -69,11 +68,11 @@ #define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ #define CFG_PCIE0_CFGBASE 0xc0000000 -#define CFG_PCIE0_XCFGBASE 0xc0000400 -#define CFG_PCIE1_CFGBASE 0xc0001000 -#define CFG_PCIE1_XCFGBASE 0xc0001400 -#define CFG_PCIE2_CFGBASE 0xc0002000 -#define CFG_PCIE2_XCFGBASE 0xc0002400 +#define CFG_PCIE1_CFGBASE 0xc1000000 +#define CFG_PCIE2_CFGBASE 0xc2000000 +#define CFG_PCIE0_XCFGBASE 0xc3000000 +#define CFG_PCIE1_XCFGBASE 0xc3001000 +#define CFG_PCIE2_XCFGBASE 0xc3002000 /* System RAM mapped to PCI space */ #define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE @@ -136,7 +135,7 @@ /* Don't probe these addrs */ #define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54} -/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */ +/* #if defined(CONFIG_CMD_EEPROM) */ /* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */ #define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ /* #endif */ @@ -183,6 +182,7 @@ "cp.b ${fileaddr} FFFB0000 ${filesize};" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "pciconfighost=1\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -191,24 +191,36 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + #define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ @@ -232,7 +244,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -286,10 +298,9 @@ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#undef CONFIG_PCI_CONFIG_HOST_BRIDGE +#define CONFIG_PCI_CONFIG_HOST_BRIDGE /* Board-specific PCI */ -#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ #define CFG_PCI_TARGET_INIT /* let board init pci target */ #undef CFG_PCI_MASTER_INIT @@ -314,7 +325,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -326,7 +337,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/zeus.h b/include/configs/zeus.h new file mode 100644 index 00000000000..605755a87e8 --- /dev/null +++ b/include/configs/zeus.h @@ -0,0 +1,382 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * zeus.h - configuration for Zeus board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_ZEUS 1 /* Board is Zeus */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EP 1 /* Specifc 405EP support*/ + +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +#define PLLMR0_DEFAULT PLLMR0_333_111_55_111 +#define PLLMR1_DEFAULT PLLMR1_333_111_55_111 + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x01 /* PHY address */ +#define CONFIG_HAS_ETH1 1 +#define CONFIG_PHY1_ADDR 0x11 /* EMAC1 PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 +#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_LOG +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_CACHE | \ + CFG_POST_UART | \ + CFG_POST_ETHER) + +#define CFG_POST_ETHER_EXT_LOOPBACK /* eth POST using ext loopack connector */ + +/* Define here the base-addresses of the UARTs to test in POST */ +#define CFG_POST_UART_TABLE {UART0_BASE} + +#define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */ + +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/*----------------------------------------------------------------------- + * SDRAM + *----------------------------------------------------------------------*/ +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_SDRAM_BANK1 1 /* init onboard SDRAM bank 1 */ + +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +/* these are for the ST M24C02 2kbit serial i2c eeprom */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 + +#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */ +#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 byte write page size */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +/* + * The layout of the I2C EEPROM, used for bootstrap setup and for board- + * specific values, like ethaddr... that can be restored via the sw-reset + * button + */ +#define FACTORY_RESET_I2C_EEPROM 0x50 +#define FACTORY_RESET_ENV_OFFS 0x80 +#define FACTORY_RESET_ENV_SIZE 0x80 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFF000000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For IBM 405EP CPU */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +/* reserve some memory for POST and BOOT limit info */ +#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16) + +/* extra data in OCM */ +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4) +#define CFG_POST_MAGIC (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8) +#define CFG_POST_VAL (CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12) + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (Flash 16M) initialization */ +#define CFG_EBC_PB0AP 0x05815600 +#define CFG_EBC_PB0CR 0xFF09A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */ + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * GPIO0[0] - External Bus Controller BLAST output + * GPIO0[1-9] - Instruction trace outputs + * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs + * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[24-27] - UART0 control signal inputs/outputs + * GPIO0[28-29] - UART1 data signal input/output + * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs + */ +#define CFG_GPIO0_OSRH 0x15555550 /* Chip selects */ +#define CFG_GPIO0_OSRL 0x00000110 /* UART_DTR-pin 27 alt out */ +#define CFG_GPIO0_ISR1H 0x10000041 /* Pin 2, 12 is input */ +#define CFG_GPIO0_ISR1L 0x15505440 /* OUT: LEDs 22/23; IN: pin12,2, NVALID# */ +#define CFG_GPIO0_TSRH 0x00000000 +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xBFF68317 /* 3-state OUT: 22/23/29; 12,2 is not 3-state */ +#define CFG_GPIO0_ODR 0x00000000 + +#define CFG_GPIO_SW_RESET 1 +#define CFG_GPIO_ZEUS_PE 12 +#define CFG_GPIO_LED_RED 22 +#define CFG_GPIO_LED_GREEN 23 + +/* Time in milli-seconds */ +#define CFG_TIME_POST 5000 +#define CFG_TIME_FACTORY_RESET 10000 + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* ENVIRONMENT VARS */ + +#define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo" +#define CONFIG_IPADDR 192.168.1.10 +#define CONFIG_SERVERIP 192.168.1.100 +#define CONFIG_GATEWAYIP 192.168.1.100 +#define CONFIG_ETHADDR 50:00:00:00:06:00 +#define CONFIG_ETH1ADDR 50:00:00:00:06:01 +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "logversion=2\0" \ + "hostname=zeus\0" \ + "netdev=eth0\0" \ + "ethact=ppc_4xx_eth0\0" \ + "netmask=255.255.255.0\0" \ + "ramdisk_size=50000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw" \ + " nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw" \ + " ramdisk=${ramdisk_size}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0," \ + "${baudrate}\0" \ + "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \ + "run nfsargs addip addtty;bootm\0" \ + "net_ram=tftp ${kernel_mem_addr} ${file_kernel};" \ + "tftp ${ramdisk_mem_addr} ${file_fs};" \ + "run ramargs addip addtty;" \ + "bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0" \ + "rootpath=/target_fs/zeus\0" \ + "kernel_fl_addr=ff000000\0" \ + "kernel_mem_addr=200000\0" \ + "ramdisk_fl_addr=ff300000\0" \ + "ramdisk_mem_addr=4000000\0" \ + "uboot_fl_addr=fffc0000\0" \ + "uboot_mem_addr=100000\0" \ + "file_uboot=/zeus/u-boot.bin\0" \ + "tftp_uboot=tftp 100000 ${file_uboot}\0" \ + "update_uboot=protect off fffc0000 ffffffff;" \ + "era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;" \ + "protect on fffc0000 ffffffff\0" \ + "upd_uboot=run tftp_uboot;run update_uboot\0" \ + "file_kernel=/zeus/uImage_ba\0" \ + "tftp_kernel=tftp 100000 ${file_kernel}\0" \ + "update_kernel=protect off ff000000 ff17ffff;" \ + "era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0" \ + "upd_kernel=run tftp_kernel;run update_kernel\0" \ + "file_fs=/zeus/rootfs_ba.img\0" \ + "tftp_fs=tftp 100000 ${file_fs}\0" \ + "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\ + "cp.b 100000 ff300000 580000\0" \ + "upd_fs=run tftp_fs;run update_fs\0" \ + "bootcmd=chkreset;run ramargs addip addtty addmisc;" \ + "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \ + "" + +#endif /* __CONFIG_H */ diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 1e8ed7abdfc..517ecb13b7f 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -76,19 +76,32 @@ #define CONFIG_BAUDRATE 115200 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifdef TURN_ON_ETHERNET -# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) + #define CONFIG_CMD_PING #else -# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_ENV \ - | CFG_CMD_NAND) \ - & ~(CFG_CMD_NET \ - | CFG_CMD_FLASH \ - | CFG_CMD_IMLS)) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_NAND + + #undef CONFIG_CMD_NET + #undef CONFIG_CMD_FLASH + #undef CONFIG_CMD_IMLS #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY -1 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -100,7 +113,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_TIMESTAMP -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif |