diff options
Diffstat (limited to 'include/spd.h')
| -rw-r--r-- | include/spd.h | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/include/spd.h b/include/spd.h new file mode 100644 index 00000000000..1ad4d801f52 --- /dev/null +++ b/include/spd.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2003 Arabella Software Ltd. + * Yuli Barcohen <yuli@arabellasw.com> + * + * Serial Presence Detect (SPD) EEPROM format according to the + * Intel's PC SDRAM Serial Presence Detect (SPD) Specification, + * revision 1.2B, November 1999 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPD_H_ +#define _SPD_H_ + +typedef struct spd_eeprom_s { + unsigned char info_size; /* # of bytes written into serial memory */ + unsigned char chip_size; /* Total # of bytes of SPD memory device */ + unsigned char mem_type; /* Fundamental memory type (FPM, EDO, SDRAM...) */ + unsigned char nrow_addr; /* # of Row Addresses on this assembly */ + unsigned char ncol_addr; /* # of Column Addresses on this assembly */ + unsigned char nrows; /* # of Module Rows on this assembly */ + unsigned char dataw_lsb; /* Data Width of this assembly */ + unsigned char dataw_msb; /* ... Data Width continuation */ + unsigned char voltage; /* Voltage interface standard of this assembly */ + unsigned char clk_cycle; /* SDRAM Cycle time at CL=X */ + unsigned char clk_access; /* SDRAM Access from Clock at CL=X */ + unsigned char config; /* DIMM Configuration type (non-parity, ECC) */ + unsigned char refresh; /* Refresh Rate/Type */ + unsigned char primw; /* Primary SDRAM Width */ + unsigned char ecw; /* Error Checking SDRAM width */ + unsigned char min_delay; /* Min Clock Delay for Back to Back Random Address */ + unsigned char burstl; /* Burst Lengths Supported */ + unsigned char nbanks; /* # of Banks on Each SDRAM Device */ + unsigned char cas_lat; /* CAS# Latencies Supported */ + unsigned char cs_lat; /* CS# Latency */ + unsigned char write_lat; /* Write Latency (also called Write Recovery time) */ + unsigned char mod_attr; /* SDRAM Module Attributes */ + unsigned char dev_attr; /* SDRAM Device Attributes */ + unsigned char clk_cycle2; /* Min SDRAM Cycle time at CL=X-1 */ + unsigned char clk_access2; /* SDRAM Access from Clock at CL=X-1 */ + unsigned char clk_cycle3; /* Min SDRAM Cycle time at CL=X-2 */ + unsigned char clk_access3; /* Max SDRAM Access from Clock at CL=X-2 */ + unsigned char trp; /* Min Row Precharge Time (tRP) */ + unsigned char trrd; /* Min Row Active to Row Active (tRRD) */ + unsigned char trcd; /* Min RAS to CAS Delay (tRCD) */ + unsigned char tras; /* Minimum RAS Pulse Width (tRAS) */ + unsigned char row_dens; /* Density of each row on module */ + unsigned char ca_setup; /* Command and Address signal input setup time */ + unsigned char ca_hold; /* Command and Address signal input hold time */ + unsigned char data_setup; /* Data signal input setup time */ + unsigned char data_hold; /* Data signal input hold time */ + unsigned char sset[26]; /* Superset Information (may be used in future) */ + unsigned char spd_rev; /* SPD Data Revision Code */ + unsigned char cksum; /* Checksum for bytes 0-62 */ + unsigned char mid[8]; /* Manufacturer's JEDEC ID code per JEP-108E */ + unsigned char mloc; /* Manufacturing Location */ + unsigned char mpart[18]; /* Manufacturer's Part Number */ + unsigned char rev[2]; /* Revision Code */ + unsigned char mdate[2]; /* Manufacturing Date */ + unsigned char sernum[4]; /* Assembly Serial Number */ + unsigned char mspec[27]; /* Manufacturer Specific Data */ + unsigned char freq; /* Intel specification frequency */ + unsigned char intel_cas; /* Intel Specification CAS# Latency support */ +} spd_eeprom_t; + +#endif /* _SPD_H_ */ |