diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/commproc.h | 7 | ||||
| -rw-r--r-- | include/configs/NETVIA.h | 238 | ||||
| -rw-r--r-- | include/configs/csb226.h | 303 | ||||
| -rw-r--r-- | include/configs/innokom.h | 4 | ||||
| -rw-r--r-- | include/configs/logodl.h | 17 | ||||
| -rw-r--r-- | include/status_led.h | 3 | ||||
| -rw-r--r-- | include/version.h | 2 |
7 files changed, 508 insertions, 66 deletions
diff --git a/include/commproc.h b/include/commproc.h index f0ee1792b2e..c10525d4e87 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -1191,7 +1191,12 @@ typedef struct scc_enet { #define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ #define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */ -#define PB_ENET_PDN ((ushort)0x4000) /* PB 17 */ +#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 +# define PB_ENET_PDN ((ushort)0x4000) /* PB 17 */ +#elif CONFIG_NETVIA_VERSION >= 2 +# define PC_ENET_PDN ((ushort)0x0008) /* PC 12 */ +#endif + #define PB_ENET_TENA ((ushort)0x2000) /* PB 18 */ #define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index 28ae9fa9e31..4e213dec78f 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -38,9 +38,15 @@ #define CONFIG_NETVIA 1 /* ...on a NetVia board */ #undef CONFIG_NETVIA_PLL_CLOCK /* PLL or fixed crystal clock */ +#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE +#else +#define CONFIG_8xx_CONS_NONE +#define CONFIG_MAX3100_SERIAL +#endif + #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ #ifdef CONFIG_NETVIA_PLL_CLOCK @@ -76,17 +82,28 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 +#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ +#endif + #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN) #undef CONFIG_MAC_PARTITION #undef CONFIG_DOS_PARTITION #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_DHCP ) +#define CONFIG_COMMANDS_BASE ( CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING ) + +#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 +#define CONFIG_COMMANDS (CONFIG_COMMANDS_BASE | CFG_CMD_NAND) +#else +#define CONFIG_COMMANDS CONFIG_COMMANDS_BASE +#endif #define CONFIG_BOARD_PRE_INIT #define CONFIG_MISC_INIT_R @@ -168,10 +185,16 @@ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x10000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000) +#define CFG_ENV_OFFSET 0 +#define CFG_ENV_SIZE 0x4000 + +#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + 0x70000) +#define CFG_ENV_OFFSET_REDUND 0 +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE + /*----------------------------------------------------------------------- * Cache Configuration */ @@ -277,22 +300,6 @@ #define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) /* - * BR1/2 and OR1/2 (4MByte Flash Bank x 2) - * - */ -#define FLASH0_SIZE 0x00400000 /* 4MByte */ -#define FLASH0_BASE 0xF0000000 - -#define CFG_OR1_PRELIM ((0xFFFFFFFFLU & ~(FLASH0_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) -#define CFG_BR1_PRELIM ((FLASH0_BASE & BR_BA_MSK) | BR_PS_32 | BR_V) - -#define FLASH1_SIZE 0x00400000 -#define FLASH1_BASE 0xF0400000 - -#define CFG_OR2_PRELIM ((0xFFFFFFFFLU & ~(FLASH1_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) -#define CFG_BR2_PRELIM ((FLASH1_BASE & BR_BA_MSK) | BR_PS_32 | BR_V) - -/* * BR3 and OR3 (SDRAM) * */ @@ -306,16 +313,6 @@ #define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V) /* - * BR6 (External register) - * 16 bit port size - leds are at high 8 bits - */ -#define EXTREG_BASE 0x30000000 /* external register */ -#define EXTREG_SIZE 0x00010000 /* max 64K */ - -#define CFG_OR6_PRELIM ((0xFFFFFFFFLU & ~(EXTREG_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_15_CLK | OR_TRLX) -#define CFG_BR6_PRELIM ((EXTREG_BASE & BR_BA_MSK) | BR_PS_32 | BR_V) - -/* * Memory Periodic Timer Prescaler */ @@ -347,4 +344,183 @@ #define CONFIG_ARTOS /* include ARTOS support */ +/****************************************************************/ + +#define DSP_SIZE 0x00010000 /* 64K */ +#define FPGA_SIZE 0x00010000 /* 64K */ + +#define DSP0_BASE 0xF1000000 +#define DSP1_BASE (DSP0_BASE + DSP_SIZE) +#define FPGA_BASE (DSP1_BASE + DSP_SIZE) + +#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 + +#define ER_SIZE 0x00010000 /* 64K */ +#define ER_BASE (FPGA_BASE + FPGA_SIZE) + +#define NAND_SIZE 0x00010000 /* 64K */ +#define NAND_BASE (ER_BASE + ER_SIZE) + +#endif + +/****************************************************************/ + +#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 + +#define STATUS_LED_BIT 0x00000001 /* bit 31 */ +#define STATUS_LED_PERIOD (CFG_HZ / 2) +#define STATUS_LED_STATE STATUS_LED_BLINKING + +#define STATUS_LED_BIT1 0x00000002 /* bit 30 */ +#define STATUS_LED_PERIOD1 (CFG_HZ / 2) +#define STATUS_LED_STATE1 STATUS_LED_OFF + +#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ +#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ + +#endif + +/*****************************************************************************/ + +#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 + +/* NAND */ +#define CFG_NAND_BASE NAND_BASE + +#define CONFIG_MTD_NAND_ECC_JFFS2 1 + +#define CFG_MAX_NAND_DEVICE 1 + +#define SECTORSIZE 512 +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define NAND_DISABLE_CE(nand) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |= 0x0040; \ + } while(0) + +#define NAND_ENABLE_CE(nand) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0040; \ + } while(0) + +#define NAND_CTL_CLRALE(nandptr) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0100; \ + } while(0) + +#define NAND_CTL_SETALE(nandptr) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |= 0x0100; \ + } while(0) + +#define NAND_CTL_CLRCLE(nandptr) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) &= ~0x0080; \ + } while(0) + +#define NAND_CTL_SETCLE(nandptr) \ + do { \ + (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) |= 0x0080; \ + } while(0) + +#define NAND_WAIT_READY(nand) \ + do { \ + while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & 0x100) == 0) \ + ; \ + } while (0) + +#define WRITE_NAND_COMMAND(d, adr) \ + do { \ + *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ + } while(0) + +#define WRITE_NAND_ADDRESS(d, adr) \ + do { \ + *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ + } while(0) + +#define WRITE_NAND(d, adr) \ + do { \ + *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ + } while(0) + +#define READ_NAND(adr) \ + ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr))) + +#endif + +/*****************************************************************************/ + +#ifndef __ASSEMBLY__ + +#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 + +/* LEDs */ + +/* last value written to the external register; we cannot read back */ +extern unsigned int last_er_val; + +/* led_id_t is unsigned long mask */ +typedef unsigned int led_id_t; + +static inline void __led_init(led_id_t mask, int state) +{ + unsigned int new_er_val; + + if (state) + new_er_val = last_er_val & ~mask; + else + new_er_val = last_er_val | mask; + + *(volatile unsigned int *)ER_BASE = new_er_val; + last_er_val = new_er_val; +} + +static inline void __led_toggle(led_id_t mask) +{ + unsigned int new_er_val; + + new_er_val = last_er_val ^ mask; + *(volatile unsigned int *)ER_BASE = new_er_val; + last_er_val = new_er_val; +} + +static inline void __led_set(led_id_t mask, int state) +{ + unsigned int new_er_val; + + if (state) + new_er_val = last_er_val & ~mask; + else + new_er_val = last_er_val | mask; + + *(volatile unsigned int *)ER_BASE = new_er_val; + last_er_val = new_er_val; +} + +/* MAX3100 console */ +#define MAX3100_SPI_RXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) +#define MAX3100_SPI_RXD_BIT 0x00000008 + +#define MAX3100_SPI_TXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) +#define MAX3100_SPI_TXD_BIT 0x00000004 + +#define MAX3100_SPI_CLK_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) +#define MAX3100_SPI_CLK_BIT 0x00000002 + +#define MAX3100_CS_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat) +#define MAX3100_CS_BIT 0x0010 + +#endif + +#endif + +/****************************************************************/ + #endif /* __CONFIG_H */ diff --git a/include/configs/csb226.h b/include/configs/csb226.h index 2806b6dd0fc..a257b82eb3b 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -63,17 +63,17 @@ #define CONFIG_BAUDRATE 19200 #undef CONFIG_MISC_INIT_R /* not used yet */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET) +#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_DHCP|CFG_CMD_CACHE) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=dhcp root=/dev/nfs, ether=0,0x08000000,eth0" +#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0" #define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.1.56 -#define CONFIG_SERVERIP 192.168.1.2 +#define CONFIG_SERVERIP 192.168.1.5 #define CONFIG_BOOTCOMMAND "bootm 0x40000" #define CONFIG_SHOW_BOOT_PROGRESS @@ -126,6 +126,13 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* + * Network chip + */ +#define CONFIG_DRIVER_CS8900 1 +#define CS8900_BUS32 1 +#define CS8900_BASE 0x08000000 + +/* * Stack sizes * * The stack sizes are set up in start.S using the settings below @@ -151,25 +158,276 @@ #define CFG_FLASH_BASE PHYS_FLASH_1 +# if 0 +/* FIXME: switch to _documented_ registers */ /* * GPIO settings + * + * GP15 == nCS1 is 1 + * GP24 == SFRM is 1 + * GP25 == TXD is 1 + * GP33 == nCS5 is 1 + * GP39 == FFTXD is 1 + * GP41 == RTS is 1 + * GP47 == TXD is 1 + * GP49 == nPWE is 1 + * GP62 == LED_B is 1 + * GP63 == TDM_OE is 1 + * GP78 == nCS2 is 1 + * GP79 == nCS3 is 1 + * GP80 == nCS4 is 1 + */ +#define CFG_GPSR0_VAL 0x03008000 +#define CFG_GPSR1_VAL 0xC0028282 +#define CFG_GPSR2_VAL 0x0001C000 + +/* GP02 == DON_RST is 0 + * GP23 == SCLK is 0 + * GP45 == USB_ACT is 0 + * GP60 == PLLEN is 0 + * GP61 == LED_A is 0 + * GP73 == SWUPD_LED is 0 + */ +#define CFG_GPCR0_VAL 0x00800004 +#define CFG_GPCR1_VAL 0x30002000 +#define CFG_GPCR2_VAL 0x00000100 + +/* GP00 == DON_READY is input + * GP01 == DON_OK is input + * GP02 == DON_RST is output + * GP03 == RESET_IND is input + * GP07 == RES11 is input + * GP09 == RES12 is input + * GP11 == SWUPDATE is input + * GP14 == nPOWEROK is input + * GP15 == nCS1 is output + * GP17 == RES22 is input + * GP18 == RDY is input + * GP23 == SCLK is output + * GP24 == SFRM is output + * GP25 == TXD is output + * GP26 == RXD is input + * GP32 == RES21 is input + * GP33 == nCS5 is output + * GP34 == FFRXD is input + * GP35 == CTS is input + * GP39 == FFTXD is output + * GP41 == RTS is output + * GP42 == USB_OK is input + * GP45 == USB_ACT is output + * GP46 == RXD is input + * GP47 == TXD is output + * GP49 == nPWE is output + * GP58 == nCPUBUSINT is input + * GP59 == LANINT is input + * GP60 == PLLEN is output + * GP61 == LED_A is output + * GP62 == LED_B is output + * GP63 == TDM_OE is output + * GP64 == nDSPINT is input + * GP65 == STRAP0 is input + * GP67 == STRAP1 is input + * GP69 == STRAP2 is input + * GP70 == STRAP3 is input + * GP71 == STRAP4 is input + * GP73 == SWUPD_LED is output + * GP78 == nCS2 is output + * GP79 == nCS3 is output + * GP80 == nCS4 is output + */ +#define CFG_GPDR0_VAL 0x03808004 +#define CFG_GPDR1_VAL 0xF002A282 +#define CFG_GPDR2_VAL 0x0001C200 + +/* GP15 == nCS1 is AF10 + * GP18 == RDY is AF01 + * GP23 == SCLK is AF10 + * GP24 == SFRM is AF10 + * GP25 == TXD is AF10 + * GP26 == RXD is AF01 + * GP33 == nCS5 is AF10 + * GP34 == FFRXD is AF01 + * GP35 == CTS is AF01 + * GP39 == FFTXD is AF10 + * GP41 == RTS is AF10 + * GP46 == RXD is AF10 + * GP47 == TXD is AF01 + * GP49 == nPWE is AF10 + * GP78 == nCS2 is AF10 + * GP79 == nCS3 is AF10 + * GP80 == nCS4 is AF10 */ -#define CFG_GPSR0_VAL 0xFFFFFFFF -#define CFG_GPSR1_VAL 0xFFFFFFFF -#define CFG_GPSR2_VAL 0xFFFFFFFF -#define CFG_GPCR0_VAL 0x08022080 -#define CFG_GPCR1_VAL 0x00000000 -#define CFG_GPCR2_VAL 0x00000000 -#define CFG_GPDR0_VAL 0xCD82A878 -#define CFG_GPDR1_VAL 0xFCFFAB80 -#define CFG_GPDR2_VAL 0x0001FFFF #define CFG_GAFR0_L_VAL 0x80000000 -#define CFG_GAFR0_U_VAL 0xA5254010 -#define CFG_GAFR1_L_VAL 0x599A9550 -#define CFG_GAFR1_U_VAL 0xAAA5AAAA -#define CFG_GAFR2_L_VAL 0xAAAAAAAA +#define CFG_GAFR0_U_VAL 0x001A8010 +#define CFG_GAFR1_L_VAL 0x60088058 +#define CFG_GAFR1_U_VAL 0x00000008 +#define CFG_GAFR2_L_VAL 0xA0000000 #define CFG_GAFR2_U_VAL 0x00000002 + +/* FIXME: set GPIO_RER/FER */ + +/* RDH = 1 + * PH = 1 + * VFS = 1 + * BFS = 1 + * SSS = 1 + */ +#define CFG_PSSR_VAL 0x37 + +/* + * Memory settings + * + * This is the configuration for nCS0/1 -> flash banks + * configuration for nCS1: + * [31] 0 - Slower Device + * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns + * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns + * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns + * [19] 1 - 16 Bit bus width + * [18:16] 000 - nonburst RAM or FLASH + * configuration for nCS0: + * [15] 0 - Slower Device + * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns + * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns + * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns + * [03] 1 - 16 Bit bus width + * [02:00] 000 - nonburst RAM or FLASH + */ +#define CFG_MSC0_VAL 0x25b825b8 /* flash banks */ + +/* This is the configuration for nCS2/3 -> TDM-Switch, DSP + * configuration for nCS3: DSP + * [31] 0 - Slower Device + * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns + * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns + * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns + * [19] 1 - 16 Bit bus width + * [18:16] 100 - variable latency I/O + * configuration for nCS2: TDM-Switch + * [15] 0 - Slower Device + * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns + * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns + * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns + * [03] 1 - 16 Bit bus width + * [02:00] 100 - variable latency I/O + */ +#define CFG_MSC1_VAL 0x123C593C /* TDM switch, DSP */ + +/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller + * + * configuration for nCS5: LAN Controller + * [31] 0 - Slower Device + * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns + * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns + * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns + * [19] 1 - 16 Bit bus width + * [18:16] 100 - variable latency I/O + * configuration for nCS4: ExtBus + * [15] 0 - Slower Device + * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns + * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns + * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns + * [03] 1 - 16 Bit bus width + * [02:00] 100 - variable latency I/O + */ +#define CFG_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ + +/* MDCNFG: SDRAM Configuration Register + * + * [31:29] 000 - reserved + * [28] 0 - no SA1111 compatiblity mode + * [27] 0 - latch return data with return clock + * [26] 0 - alternate addressing for pair 2/3 + * [25:24] 00 - timings + * [23] 0 - internal banks in lower partition 2/3 (not used) + * [22:21] 00 - row address bits for partition 2/3 (not used) + * [20:19] 00 - column address bits for partition 2/3 (not used) + * [18] 0 - SDRAM partition 2/3 width is 32 bit + * [17] 0 - SDRAM partition 3 disabled + * [16] 0 - SDRAM partition 2 disabled + * [15:13] 000 - reserved + * [12] 1 - SA1111 compatiblity mode + * [11] 1 - latch return data with return clock + * [10] 0 - no alternate addressing for pair 0/1 + * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk + * [7] 1 - 4 internal banks in lower partition pair + * [06:05] 10 - 13 row address bits for partition 0/1 + * [04:03] 01 - 9 column address bits for partition 0/1 + * [02] 0 - SDRAM partition 0/1 width is 32 bit + * [01] 0 - disable SDRAM partition 1 + * [00] 1 - enable SDRAM partition 0 + */ +/* use the configuration above but disable partition 0 */ +#define CFG_MDCNFG_VAL 0x000019c8 + +/* MDREFR: SDRAM Refresh Control Register + * + * [32:26] 0 - reserved + * [25] 0 - K2FREE: not free running + * [24] 0 - K1FREE: not free running + * [23] 1 - K0FREE: not free running + * [22] 0 - SLFRSH: self refresh disabled + * [21] 0 - reserved + * [20] 0 - APD: no auto power down + * [19] 0 - K2DB2: SDCLK2 is MemClk + * [18] 0 - K2RUN: disable SDCLK2 + * [17] 0 - K1DB2: SDCLK1 is MemClk + * [16] 1 - K1RUN: enable SDCLK1 + * [15] 1 - E1PIN: SDRAM clock enable + * [14] 1 - K0DB2: SDCLK0 is MemClk + * [13] 0 - K0RUN: disable SDCLK0 + * [12] 1 - E0PIN: disable SDCKE0 + * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 + */ +#define CFG_MDREFR_VAL 0x0081D018 + +/* MDMRS: Mode Register Set Configuration Register + * + * [31] 0 - reserved + * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) + * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used) + * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) + * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) + * [15] 0 - reserved + * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. + * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency. + * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. + * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. + */ +#define CFG_MDMRS_VAL 0x00020022 + +/* + * PCMCIA and CF Interfaces + */ +#define CFG_MECR_VAL 0x00000000 +#define CFG_MCMEM0_VAL 0x00000000 +#define CFG_MCMEM1_VAL 0x00000000 +#define CFG_MCATT0_VAL 0x00000000 +#define CFG_MCATT1_VAL 0x00000000 +#define CFG_MCIO0_VAL 0x00000000 +#define CFG_MCIO1_VAL 0x00000000 +#endif + +/* + * GPIO settings + */ +#define CFG_GPSR0_VAL 0xFFFFFFFF +#define CFG_GPSR1_VAL 0xFFFFFFFF +#define CFG_GPSR2_VAL 0xFFFFFFFF +#define CFG_GPCR0_VAL 0x08022080 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPDR0_VAL 0xCD82A878 +#define CFG_GPDR1_VAL 0xFCFFAB80 +#define CFG_GPDR2_VAL 0x0001FFFF +#define CFG_GAFR0_L_VAL 0x80000000 +#define CFG_GAFR0_U_VAL 0xA5254010 +#define CFG_GAFR1_L_VAL 0x599A9550 +#define CFG_GAFR1_U_VAL 0xAAA5AAAA +#define CFG_GAFR2_L_VAL 0xAAAAAAAA +#define CFG_GAFR2_U_VAL 0x00000002 + /* FIXME: set GPIO_RER/FER */ #define CFG_PSSR_VAL 0x20 @@ -177,12 +435,13 @@ /* * Memory settings */ -#define CFG_MSC0_VAL 0x2EF025D0 -#define CFG_MSC1_VAL 0x00003F64 -#define CFG_MSC2_VAL 0x00000000 -#define CFG_MDCNFG_VAL 0x09a909a9 -#define CFG_MDREFR_VAL 0x03ca0030 -#define CFG_MDMRS_VAL 0x00220022 + +#define CFG_MSC0_VAL 0x2ef15af0 +#define CFG_MSC1_VAL 0x00003ff4 +#define CFG_MSC2_VAL 0x7ff07ff0 +#define CFG_MDCNFG_VAL 0x09a909a9 +#define CFG_MDREFR_VAL 0x038ff030 +#define CFG_MDMRS_VAL 0x00220022 /* * PCMCIA and CF Interfaces diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 312c854b674..60699fec458 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -30,8 +30,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define DEBUG 1 - /* * If we are developing, we might want to start U-Boot from ram * so we MUST NOT initialize critical regs like mem-timing ... @@ -62,7 +60,7 @@ #define CONFIG_BAUDRATE 19200 #define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */ -#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP) +#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP|CFG_CMD_CACHE) /* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/logodl.h b/include/configs/logodl.h index c018b6b646b..cb737fc2da6 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -58,8 +58,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 19200 -/*#define CONFIG_MISC_INIT_R 1 / * we have a misc_init_r() function */ -#undef CONFIG_MISC_INIT_R /* FIXME */ +#undef CONFIG_MISC_INIT_R /* FIXME: misc_init_r() missing */ #define CONFIG_COMMANDS (CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO) /* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */ @@ -120,12 +119,14 @@ /* * SMSC91C111 Network Card */ -/*#define CONFIG_DRIVER_SMC91111 1 */ -/*#define CONFIG_SMC91111_BASE 0x10000000 / * chip select 4 */ -/*#undef CONFIG_SMC_USE_32_BIT / * 16 bit bus access */ -/*#undef CONFIG_SMC_91111_EXT_PHY / * we use internal phy */ -/*#undef CONFIG_SHOW_ACTIVITY */ -/*#define CONFIG_NET_RETRY_COUNT 10 / * # of retries */ +#if 0 +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x10000000 /* chip select 4 */ +#undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ +#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ +#undef CONFIG_SHOW_ACTIVITY +#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ +#endif /* * Stack sizes diff --git a/include/status_led.h b/include/status_led.h index 5a33e31e933..e8ba9fd42d4 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -236,6 +236,8 @@ void status_led_set (int led, int state); /***** NetVia ********************************************************/ #elif defined(CONFIG_NETVIA) +#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 + #define STATUS_LED_PAR im_ioport.iop_pdpar #define STATUS_LED_DIR im_ioport.iop_pddir #undef STATUS_LED_ODR @@ -252,6 +254,7 @@ void status_led_set (int led, int state); # define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ +#endif /***** CMI ********************************************************/ #elif defined(CONFIG_CMI) diff --git a/include/version.h b/include/version.h index 8876686aa15..3f228c8b81d 100644 --- a/include/version.h +++ b/include/version.h @@ -24,6 +24,6 @@ #ifndef __VERSION_H__ #define __VERSION_H__ -#define U_BOOT_VERSION "U-Boot 0.3.2" +#define U_BOOT_VERSION "U-Boot 0.4.0" #endif /* __VERSION_H__ */ |