summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/apalis-imx8.h2
-rw-r--r--include/configs/apalis_imx6.h9
-rw-r--r--include/configs/colibri-imx6ull.h10
-rw-r--r--include/configs/colibri-imx8x.h2
-rw-r--r--include/configs/colibri_imx6.h9
-rw-r--r--include/configs/colibri_imx7.h11
-rw-r--r--include/configs/verdin-imx8mm.h3
-rw-r--r--include/configs/verdin-imx8mp.h5
-rw-r--r--include/efi_loader.h4
-rw-r--r--include/efi_variable.h16
10 files changed, 26 insertions, 45 deletions
diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index 845705c86db..c8ec034fc97 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -46,8 +46,6 @@
"fdt_board=eval\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
- "consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin resp. u-boot-dtb.imx (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 8a9f3ef75a7..0df3917e200 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -64,12 +64,9 @@
#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
- "boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
- "defargs=enable_wait_mode=off vmalloc=400M\0" \
"fdt_board=eval\0" \
- "fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
@@ -80,16 +77,12 @@
"|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
" ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
- "setup=setenv setupargs fec_mac=${ethaddr} " \
- "consoleblank=0 no_console_suspend=1 console=tty1 " \
- "console=${console},${baudrate}n8\0 " \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"splashpos=m,m\0" \
- "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "vidargs=mxc_hdmi.only_cea=1 fbmem=32M\0"
+ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"
/* Miscellaneous configurable options */
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 561a61ebc03..7c9d633b68d 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -48,8 +48,8 @@
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
- "setenv bootargs ${defargs} ${ubiargs} " \
- "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
+ "setenv bootargs ${ubiargs} " \
+ "${setupargs} ${tdxargs}; echo Booting from NAND...; " \
"ubi part ubi &&" \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
@@ -86,11 +86,7 @@
UBOOT_UPDATE \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
- "defargs=user_debug=30\0" \
"fdt_board=eval-v3\0" \
- "fdt_fixup=;\0" \
- "ip_dyn=yes\0" \
- "kernel_file=zImage\0" \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -99,7 +95,7 @@
"${board}/flash_blk.img && source ${loadaddr}\0" \
"setup=setenv setupargs " \
"console=tty1 console=${console}" \
- ",${baudrate}n8 ${memargs} ${mtdparts} consoleblank=0\0" \
+ ",${baudrate}n8 ${memargs} ${mtdparts}\0" \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb && " \
"fatload ${interface} 0:1 ${loadaddr} " \
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 042fcb8757f..2b7fea30116 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -40,8 +40,6 @@
"fdt_board=eval-v3\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
- "consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin resp. u-boot-dtb.imx (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 4b2841833b5..79e5b870b81 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -58,12 +58,9 @@
#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
- "boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
- "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
"fdt_board=eval-v3\0" \
- "fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
@@ -72,16 +69,12 @@
"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
- "setup=setenv setupargs fec_mac=${ethaddr} " \
- "consoleblank=0 no_console_suspend=1 console=tty1 " \
- "console=${console},${baudrate}n8\0 " \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"splashpos=m,m\0" \
- "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "vidargs=fbmem=8M\0"
+ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"
/* Miscellaneous configurable options */
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 7a9f4afe7d1..c34f1f903df 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -89,8 +89,8 @@
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
- "setenv bootargs ${defargs} ${ubiargs} " \
- "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
+ "setenv bootargs ${ubiargs} " \
+ "${setupargs} ${tdxargs}; echo Booting from NAND...; " \
"ubi part ubi && run m4boot && " \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
@@ -123,15 +123,10 @@
MEM_LAYOUT_ENV_SETTINGS \
MODULE_EXTRA_ENV_SETTINGS \
UBOOT_UPDATE \
- "boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
- "defargs=\0" \
"fdt_board=eval-v3\0" \
- "fdt_fixup=;\0" \
"m4boot=;\0" \
- "ip_dyn=yes\0" \
- "kernel_file=zImage\0" \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -140,7 +135,7 @@
"${board}/flash_blk.img && source ${loadaddr}\0" \
"setup=setenv setupargs " \
"console=tty1 console=${console}" \
- ",${baudrate}n8 ${memargs} ${mtdparts} consoleblank=0\0" \
+ ",${baudrate}n8 ${memargs} ${mtdparts}\0" \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb && " \
"fatload ${interface} 0:1 ${loadaddr} " \
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index a7ea02807dd..34238d3b505 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -37,14 +37,11 @@
#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
- "boot_file=Image\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
"fdt_board=dev\0" \
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
- "consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 256bab089ff..0b88e95603d 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -13,7 +13,6 @@
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#ifdef CONFIG_SPL_BUILD
-/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x184000
@@ -40,15 +39,11 @@
#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
- "boot_file=Image\0" \
- "boot_scripts=boot.scr\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc2\0" \
"fdt_board=dev\0" \
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
- "consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
"if test \"$confirm\" = \"y\"; then " \
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/efi_loader.h b/include/efi_loader.h
index bb51c028177..69442f4e58d 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -159,6 +159,10 @@ static inline void efi_set_bootdev(const char *dev, const char *devnr,
#define EFICONFIG_AUTO_GENERATED_ENTRY_GUID \
EFI_GUID(0x8108ac4e, 0x9f11, 0x4d59, \
0x85, 0x0e, 0xe2, 0x1a, 0x52, 0x2c, 0x59, 0xb2)
+#define U_BOOT_EFI_RT_VAR_FILE_GUID \
+ EFI_GUID(0xb2ac5fc9, 0x92b7, 0x4acd, \
+ 0xae, 0xac, 0x11, 0xe8, 0x18, 0xc3, 0x13, 0x0c)
+
/* Use internal device tree when starting UEFI application */
#define EFI_FDT_USE_INTERNAL NULL
diff --git a/include/efi_variable.h b/include/efi_variable.h
index 42a2b7c52be..223bb9a4a5b 100644
--- a/include/efi_variable.h
+++ b/include/efi_variable.h
@@ -271,13 +271,16 @@ const efi_guid_t *efi_auth_var_get_guid(const u16 *name);
*
* @variable_name_size: size of variable_name buffer in bytes
* @variable_name: name of uefi variable's name in u16
+ * @mask: bitmask with required attributes of variables to be collected.
+ * variables are only collected if all of the required
+ * attributes match. Use 0 to skip matching
* @vendor: vendor's guid
*
* Return: status code
*/
efi_status_t __efi_runtime
efi_get_next_variable_name_mem(efi_uintn_t *variable_name_size, u16 *variable_name,
- efi_guid_t *vendor);
+ efi_guid_t *vendor, u32 mask);
/**
* efi_get_variable_mem() - Runtime common code across efi variable
* implementations for GetVariable() from
@@ -289,12 +292,15 @@ efi_get_next_variable_name_mem(efi_uintn_t *variable_name_size, u16 *variable_na
* @data_size: size of the buffer to which the variable value is copied
* @data: buffer to which the variable value is copied
* @timep: authentication time (seconds since start of epoch)
+ * @mask: bitmask with required attributes of variables to be collected.
+ * variables are only collected if all of the required
+ * attributes match. Use 0 to skip matching
* Return: status code
*/
efi_status_t __efi_runtime
efi_get_variable_mem(const u16 *variable_name, const efi_guid_t *vendor,
u32 *attributes, efi_uintn_t *data_size, void *data,
- u64 *timep);
+ u64 *timep, u32 mask);
/**
* efi_get_variable_runtime() - runtime implementation of GetVariable()
@@ -334,4 +340,10 @@ efi_get_next_variable_name_runtime(efi_uintn_t *variable_name_size,
*/
void efi_var_buf_update(struct efi_var_file *var_buf);
+efi_status_t __efi_runtime efi_var_collect_mem(struct efi_var_file *buf,
+ efi_uintn_t *lenp,
+ u32 check_attr_mask);
+
+u32 efi_var_entry_len(struct efi_var_entry *var);
+
#endif
generated by cgit v1.2.3 (git 2.0.4) at 2025-10-25 16:37:46 +0000