diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/stm32mp13_common.h | 100 | ||||
| -rw-r--r-- | include/configs/stm32mp13_st_common.h | 17 | ||||
| -rw-r--r-- | include/configs/stm32mp15_common.h | 13 | ||||
| -rw-r--r-- | include/configs/stm32mp15_st_common.h | 2 | ||||
| -rw-r--r-- | include/elf.h | 4 | ||||
| -rw-r--r-- | include/linux/mtd/fsmc_nand.h | 2 | ||||
| -rw-r--r-- | include/power/stpmic1.h | 3 | ||||
| -rw-r--r-- | include/usb/designware_udc.h | 2 |
8 files changed, 123 insertions, 20 deletions
diff --git a/include/configs/stm32mp13_common.h b/include/configs/stm32mp13_common.h new file mode 100644 index 00000000000..beb56fcb5af --- /dev/null +++ b/include/configs/stm32mp13_common.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/* + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved + * + * Configuration settings for the STM32MP13x CPU + */ + +#ifndef __CONFIG_STM32MP13_COMMMON_H +#define __CONFIG_STM32MP13_COMMMON_H +#include <linux/sizes.h> +#include <asm/arch/stm32.h> + +/* + * Configuration of the external SRAM memory used by U-Boot + */ +#define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE + +/* + * For booting Linux, use the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ SZ_256M + +/* Extend size of kernel image for uncompression */ +#define CONFIG_SYS_BOOTM_LEN SZ_32M + +/*MMC SD*/ +#define CONFIG_SYS_MMC_MAX_DEVICE 2 + +/* NAND support */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/*****************************************************************************/ +#ifdef CONFIG_DISTRO_DEFAULTS +/*****************************************************************************/ + +#ifdef CONFIG_CMD_MMC +#define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0) +#define BOOT_TARGET_MMC1(func) func(MMC, mmc, 1) +#else +#define BOOT_TARGET_MMC0(func) +#define BOOT_TARGET_MMC1(func) +#endif + +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_MMC1(func) \ + BOOT_TARGET_MMC0(func) + +/* + * default bootcmd for stm32mp13: + * for mmc boot (eMMC, SD card), distro boot on the same mmc device + */ +#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \ + "echo \"Boot over ${boot_device}${boot_instance}!\";" \ + "run env_check;" \ + "if test ${boot_device} = mmc;" \ + "then env set boot_targets \"mmc${boot_instance}\"; fi;" \ + "run distro_bootcmd;" \ + "fi;\0" + +#define STM32MP_EXTRA \ + "env_check=if env info -p -d -q; then env save; fi\0" \ + "boot_net_usb_start=true\0" + +#ifndef STM32MP_BOARD_EXTRA_ENV +#define STM32MP_BOARD_EXTRA_ENV +#endif + +#include <config_distro_bootcmd.h> + +/* + * memory layout for 32M uncompressed/compressed kernel, + * 1M fdt, 1M script, 1M pxe and 1M for overlay + * and the ramdisk at the end. + */ +#define __KERNEL_ADDR_R __stringify(0xc2000000) +#define __FDT_ADDR_R __stringify(0xc4000000) +#define __SCRIPT_ADDR_R __stringify(0xc4100000) +#define __PXEFILE_ADDR_R __stringify(0xc4200000) +#define __FDTOVERLAY_ADDR_R __stringify(0xc4300000) +#define __RAMDISK_ADDR_R __stringify(0xc4400000) + +#define STM32MP_MEM_LAYOUT \ + "kernel_addr_r=" __KERNEL_ADDR_R "\0" \ + "fdt_addr_r=" __FDT_ADDR_R "\0" \ + "scriptaddr=" __SCRIPT_ADDR_R "\0" \ + "pxefile_addr_r=" __PXEFILE_ADDR_R "\0" \ + "fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \ + "ramdisk_addr_r=" __RAMDISK_ADDR_R "\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + STM32MP_MEM_LAYOUT \ + STM32MP_BOOTCMD \ + BOOTENV \ + STM32MP_EXTRA \ + STM32MP_BOARD_EXTRA_ENV + +#endif /* ifdef CONFIG_DISTRO_DEFAULTS*/ + +#endif /* __CONFIG_STM32MP13_COMMMON_H */ diff --git a/include/configs/stm32mp13_st_common.h b/include/configs/stm32mp13_st_common.h new file mode 100644 index 00000000000..ec64b12f7ab --- /dev/null +++ b/include/configs/stm32mp13_st_common.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/* + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved + * + * Configuration settings for the STMicroelectronics STM32MP13x boards + */ + +#ifndef __CONFIG_STM32MP13_ST_COMMON_H__ +#define __CONFIG_STM32MP13_ST_COMMON_H__ + +#define STM32MP_BOARD_EXTRA_ENV \ + "usb_pgood_delay=1000\0" \ + "console=ttySTM0\0" + +#include <configs/stm32mp13_common.h> + +#endif diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index ec41a8172c7..fc636beb3fc 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -16,10 +16,6 @@ #define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE /* - * Console I/O buffer size - */ - -/* * For booting Linux, use the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ @@ -28,13 +24,6 @@ /* Extend size of kernel image for uncompression */ #define CONFIG_SYS_BOOTM_LEN SZ_32M -/* SPL support */ -#ifdef CONFIG_SPL -/* SPL use DDR */ - -/* Restrict SPL to fit within SYSRAM */ -#define STM32_SYSRAM_END (STM32_SYSRAM_BASE + STM32_SYSRAM_SIZE) -#endif /* #ifdef CONFIG_SPL */ /*MMC SD*/ #define CONFIG_SYS_MMC_MAX_DEVICE 3 @@ -90,7 +79,7 @@ BOOT_TARGET_PXE(func) /* - * default bootcmd for stm32mp1: + * default bootcmd for stm32mp15: * for serial/usb: execute the stm32prog command * for mmc boot (eMMC, SD card), distro boot on the same mmc device * for nand or spi-nand boot, distro boot with ubifs on UBI partition diff --git a/include/configs/stm32mp15_st_common.h b/include/configs/stm32mp15_st_common.h index 3c0ffb8f56f..37b216e6e9f 100644 --- a/include/configs/stm32mp15_st_common.h +++ b/include/configs/stm32mp15_st_common.h @@ -2,7 +2,7 @@ /* * Copyright (C) 2021, STMicroelectronics - All Rights Reserved * - * Configuration settings for the STMicroelectonics STM32MP15x boards + * Configuration settings for the STMicroelectronics STM32MP15x boards */ #ifndef __CONFIG_STM32MP15_ST_COMMON_H__ diff --git a/include/elf.h b/include/elf.h index b04e746d617..aeda159f0c0 100644 --- a/include/elf.h +++ b/include/elf.h @@ -188,14 +188,14 @@ typedef struct { #define EM_NDR1 57 /* Denso NDR1 microprocessor */ #define EM_STARCORE 58 /* Motorola Start*Core processor */ #define EM_ME16 59 /* Toyota ME16 processor */ -#define EM_ST100 60 /* STMicroelectronic ST100 processor */ +#define EM_ST100 60 /* STMicroelectronics ST100 processor */ #define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/ #define EM_X86_64 62 /* AMD x86-64 */ #define EM_PDSP 63 /* Sony DSP Processor */ /* RESERVED 64,65 for future use */ #define EM_FX66 66 /* Siemens FX66 microcontroller */ #define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */ -#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */ +#define EM_ST7 68 /* STMicroelectronics ST7 8 bit mc */ #define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */ #define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */ #define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */ diff --git a/include/linux/mtd/fsmc_nand.h b/include/linux/mtd/fsmc_nand.h index 6079f9e260d..1d8a067f17e 100644 --- a/include/linux/mtd/fsmc_nand.h +++ b/include/linux/mtd/fsmc_nand.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2010 - * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. */ #ifndef __FSMC_NAND_H__ diff --git a/include/power/stpmic1.h b/include/power/stpmic1.h index d3567df326c..201b1df762e 100644 --- a/include/power/stpmic1.h +++ b/include/power/stpmic1.h @@ -23,12 +23,9 @@ /* BUCKS_MRST_CR */ #define STPMIC1_MRST_BUCK(buck) BIT(buck) -#define STPMIC1_MRST_BUCK_DEBUG (STPMIC1_MRST_BUCK(STPMIC1_BUCK1) | \ - STPMIC1_MRST_BUCK(STPMIC1_BUCK3)) /* LDOS_MRST_CR */ #define STPMIC1_MRST_LDO(ldo) BIT(ldo) -#define STPMIC1_MRST_LDO_DEBUG 0 /* BUCKx_MAIN_CR (x=1...4) */ #define STPMIC1_BUCK_ENA BIT(0) diff --git a/include/usb/designware_udc.h b/include/usb/designware_udc.h index f874e5c35cc..f716f07dd04 100644 --- a/include/usb/designware_udc.h +++ b/include/usb/designware_udc.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2009 - * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. */ #ifndef __DW_UDC_H |