diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/T208xRDB.h | 6 | ||||
| -rw-r--r-- | include/configs/T4240RDB.h | 2 | ||||
| -rw-r--r-- | include/configs/ls2080ardb.h | 10 | ||||
| -rw-r--r-- | include/configs/lx2160a_common.h | 4 | ||||
| -rw-r--r-- | include/i2c.h | 14 |
5 files changed, 17 insertions, 19 deletions
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 63cc5af2c6d..601e67c80c3 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -479,7 +479,6 @@ unsigned long get_board_ddr_clk(void); * env, so we got 0x110000. */ #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 -#define CONFIG_CORTINA_FW_ADDR 0x120000 #elif defined(CONFIG_SDCARD) /* @@ -488,11 +487,9 @@ unsigned long get_board_ddr_clk(void); * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. */ #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) -#define CONFIG_CORTINA_FW_ADDR (512 * 0x8a0) #elif defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) -#define CONFIG_CORTINA_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* * Slave has no ucode locally, it can fetch this from remote. When implementing @@ -502,17 +499,14 @@ unsigned long get_board_ddr_clk(void); * master LAW->the ucode address in master's memory space. */ #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 -#define CONFIG_CORTINA_FW_ADDR 0xFFE10000 #else #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#define CONFIG_CORTINA_FW_ADDR 0xEFE00000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_CORTINA_FW_LENGTH 0x40000 #define RGMII_PHY1_ADDR 0x01 /* RealTek RTL8211E */ #define RGMII_PHY2_ADDR 0x02 #define CORTINA_PHY_ADDR1 0x0c /* Cortina CS4315 */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 57a39fa970f..c796b1d7ed0 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -517,8 +517,6 @@ unsigned long get_board_ddr_clk(void); #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_CORTINA_FW_ADDR 0xefe00000 -#define CONFIG_CORTINA_FW_LENGTH 0x40000 #define SGMII_PHY_ADDR1 0x0 #define SGMII_PHY_ADDR2 0x1 #define SGMII_PHY_ADDR3 0x2 diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 49c2cc573bc..bfbde1da978 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -560,14 +560,6 @@ unsigned long get_board_sys_clk(void); #endif /* MAC/PHY configuration */ -#ifdef CONFIG_FSL_MC_ENET -#ifdef CONFIG_QSPI_BOOT -#define CONFIG_CORTINA_FW_ADDR 0x20980000 -#else -#define CONFIG_CORTINA_FW_ADDR 0x580980000 -#endif -#define CONFIG_CORTINA_FW_LENGTH 0x40000 - #define CORTINA_PHY_ADDR1 0x10 #define CORTINA_PHY_ADDR2 0x11 #define CORTINA_PHY_ADDR3 0x12 @@ -577,9 +569,7 @@ unsigned long get_board_sys_clk(void); #define AQ_PHY_ADDR3 0x02 #define AQ_PHY_ADDR4 0x03 #define AQR405_IRQ_MASK 0x36 - #define CONFIG_ETHPRIME "DPMAC1@xgmii" -#endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 1338ee3cda3..1ae7d37dd9f 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -143,7 +143,6 @@ /* USB */ #ifdef CONFIG_USB_HOST -#define CONFIG_HAS_FSL_XHCI_USB #ifndef CONFIG_TARGET_LX2162AQDS #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif @@ -181,6 +180,7 @@ unsigned long get_board_ddr_clk(void); #define XSPI_MC_INIT_CMD \ "sf probe 0:0 && " \ "sf read 0x80640000 0x640000 0x80000 && " \ + "sf read $fdt_addr_r 0xf00000 0x100000 && " \ "env exists secureboot && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000; " \ @@ -191,6 +191,7 @@ unsigned long get_board_ddr_clk(void); #define SD_MC_INIT_CMD \ "mmc read 0x80a00000 0x5000 0x1200;" \ "mmc read 0x80e00000 0x7000 0x800;" \ + "mmc read $fdt_addr_r 0x7800 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ "mmc read 0x80680000 0x3400 0x20 && " \ @@ -201,6 +202,7 @@ unsigned long get_board_ddr_clk(void); #define SD2_MC_INIT_CMD \ "mmc dev 1; mmc read 0x80a00000 0x5000 0x1200;" \ "mmc read 0x80e00000 0x7000 0x800;" \ + "mmc read $fdt_addr_r 0x7800 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ "mmc read 0x80680000 0x3400 0x20 && " \ diff --git a/include/i2c.h b/include/i2c.h index 8db34a67fee..3d9ecaba0b6 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -243,6 +243,20 @@ int dm_i2c_reg_read(struct udevice *dev, uint offset); int dm_i2c_reg_write(struct udevice *dev, uint offset, unsigned int val); /** + * dm_i2c_reg_clrset() - Apply bitmask to an I2C register + * + * Read value, apply bitmask and write modified value back to the + * given address in an I2C chip + * + * @dev: Device to use for transfer + * @offset: Address for the R/W operation + * @clr: Bitmask of bits that should be cleared + * @set: Bitmask of bits that should be set + * @return 0 on success, -ve on error + */ +int dm_i2c_reg_clrset(struct udevice *dev, uint offset, u32 clr, u32 set); + +/** * dm_i2c_xfer() - Transfer messages over I2C * * This transfers a raw message. It is best to use dm_i2c_reg_read/write() |