diff options
Diffstat (limited to 'include')
538 files changed, 1919 insertions, 3546 deletions
diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h deleted file mode 100644 index a59b9bbafbd..00000000000 --- a/include/config_uncmd_spl.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2012 - * Ilya Yanok, ilya.yanok@gmail.com - */ - -#ifndef __CONFIG_UNCMD_SPL_H__ -#define __CONFIG_UNCMD_SPL_H__ - -#ifdef CONFIG_SPL_BUILD -/* SPL needs only BOOTP + TFTP so undefine other stuff to save space */ - -#ifndef CONFIG_SPL_DM -#undef CONFIG_DM_SERIAL -#undef CONFIG_DM_I2C -#endif - -#undef CONFIG_DM_STDIO - -#endif /* CONFIG_SPL_BUILD */ -#endif /* __CONFIG_UNCMD_SPL_H__ */ diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h index 3a4fbc6eab8..b898ec0cc3e 100644 --- a/include/configs/10m50_devboard.h +++ b/include/configs/10m50_devboard.h @@ -32,6 +32,5 @@ */ #define CFG_SYS_SDRAM_BASE 0xc8000000 #define CFG_SYS_SDRAM_SIZE 0x08000000 -#define CONFIG_MONITOR_IS_IN_RAM #endif /* __CONFIG_H */ diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h index ab889180eed..e67338c202c 100644 --- a/include/configs/3c120_devboard.h +++ b/include/configs/3c120_devboard.h @@ -28,6 +28,5 @@ */ #define CFG_SYS_SDRAM_BASE 0xD0000000 #define CFG_SYS_SDRAM_SIZE 0x08000000 -#define CONFIG_MONITOR_IS_IN_RAM #endif /* __CONFIG_H */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index b360238b332..a4fda551f1f 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -17,15 +17,7 @@ /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* CONFIG_MCFFEC */ - -#define CONFIG_HOSTNAME "M5208EVBe" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=40010000\0" \ "u-boot=u-boot.bin\0" \ @@ -37,7 +29,7 @@ "save\0" \ "" -#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PRAM 512 /* 512 KB */ #define CFG_SYS_CLK 166666666 /* CPU Core Clock */ #define CFG_SYS_PLL_ODR 0x36 diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index ed45eccb62c..8939c8e7ab9 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -26,15 +26,8 @@ #define CFG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) /* this must be included AFTER the definition of CONFIG COMMANDS (if any) */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M5235EVB" -#define CONFIG_EXTRA_ENV_SETTINGS \ + +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ "u-boot=u-boot.bin\0" \ @@ -46,7 +39,7 @@ "save\0" \ "" -#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PRAM 512 /* 512 KB */ #define CFG_SYS_CLK 75000000 #define CFG_SYS_CPU_CLK CFG_SYS_CLK * 2 diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 0e38eeb4a36..4fd539c0174 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -20,8 +20,6 @@ #define CFG_SYS_UART_PORT (0) -#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ - /* * Clock configuration: enable only one of the following options */ @@ -59,7 +57,7 @@ #define CFG_SYS_FLASH_BASE (CFG_SYS_CS0_BASE) #if 0 /* test-only */ -#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ +#define CFG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ #endif /* diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 7e37c6d1199..a6349fc0861 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -20,15 +20,7 @@ env/embedded.o(.text*); #ifdef CONFIG_DRIVER_DM9000 -# define CONFIG_DM9000_BASE (CFG_SYS_CS1_BASE | 0x300) -# define DM9000_IO CONFIG_DM9000_BASE -# define DM9000_DATA (CONFIG_DM9000_BASE + 4) -# undef CONFIG_DM9000_DEBUG -# define CONFIG_DM9000_BYTE_SWAPPED - -# define CONFIG_OVERWRITE_ETHADDR_ONCE - -# define CONFIG_EXTRA_ENV_SETTINGS \ +# define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ "loadaddr=10000\0" \ @@ -42,8 +34,6 @@ "" #endif -#define CONFIG_HOSTNAME "M5253DEMO" - /* I2C */ #define CFG_SYS_I2C_PINMUX_REG (*(u32 *) (CFG_SYS_MBAR+0x19C)) #define CFG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index a9339e50525..33c2fc08706 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -19,8 +19,6 @@ #define CFG_SYS_UART_PORT (0) -#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ @@ -29,15 +27,7 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text); -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* CONFIG_MCFFEC */ - -#define CONFIG_HOSTNAME "M5272C3" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ "u-boot=u-boot.bin\0" \ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index ff9f8535896..607c5dee2fb 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -38,11 +38,7 @@ #define CFG_SYS_I2C_PINMUX_CLR (0xFFF0) #define CFG_SYS_I2C_PINMUX_SET (0x000F) -#ifdef CONFIG_MCFFEC -# define CONFIG_OVERWRITE_ETHADDR_ONCE -#endif /* FEC_ENET */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ "uboot=u-boot.bin\0" \ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index bde9e770e52..31699a40b6f 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -19,8 +19,6 @@ #define CFG_SYS_UART_PORT (0) -#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ @@ -29,15 +27,7 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text*); -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* CONFIG_MCFFEC */ - -#define CONFIG_HOSTNAME "M5282EVB" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ "u-boot=u-boot.bin\0" \ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 42b74aeb9b5..6359915e09a 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -30,15 +30,7 @@ /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M53017" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=40010000\0" \ "u-boot=u-boot.bin\0" \ @@ -50,7 +42,7 @@ "save\0" \ "" -#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PRAM 512 /* 512 KB */ #define CFG_SYS_CLK 80000000 #define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3 @@ -93,7 +85,6 @@ * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_FLASH_SPANSION_S29WS_N 1 # define CFG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ #endif diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 72f0c63a1e2..456135bdc64 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -22,15 +22,7 @@ /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M5329EVB" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=40010000\0" \ "u-boot=u-boot.bin\0" \ @@ -42,7 +34,7 @@ "save\0" \ "" -#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PRAM 512 /* 512 KB */ #define CFG_SYS_CLK 80000000 #define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3 diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 4e8b54e01f4..4e8dcb5ef7f 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -24,15 +24,7 @@ /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M5373EVB" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "u-boot=u-boot.bin\0" \ @@ -44,7 +36,7 @@ "save\0" \ "" -#define CONFIG_PRAM 512 /* 512 KB */ +#define CFG_PRAM 512 /* 512 KB */ #define CFG_SYS_CLK 80000000 #define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3 diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h index 232cf9e9984..c6929c1b987 100644 --- a/include/configs/MCR3000.h +++ b/include/configs/MCR3000.h @@ -9,7 +9,7 @@ /* High Level Configuration Options */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "sdram_type=SDRAM\0" \ "flash_type=AM29LV160DB\0" \ "loadaddr=0x400000\0" \ @@ -52,10 +52,6 @@ "${ofl_args}; " \ "bootm ${loadaddr} - 0xf00000\0" -#define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_NETMASK 255.0.0.0 - /* Miscellaneous configurable options */ /* Definitions for initial stack pointer and data area (in DPRAM) */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 95a90199a42..70b1c399241 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -41,11 +41,9 @@ #ifdef CONFIG_VSC7385_ENET -#define CONFIG_TSEC2 - /* The flash address and size of the VSC7385 firmware image */ -#define CONFIG_VSC7385_IMAGE 0xFE7FE000 -#define CONFIG_VSC7385_IMAGE_SIZE 8192 +#define CFG_VSC7385_IMAGE 0xFE7FE000 +#define CFG_VSC7385_IMAGE_SIZE 8192 #endif @@ -57,8 +55,6 @@ #define CFG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN) -#undef CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */ - /* * Manually set up DDR parameters */ @@ -153,8 +149,8 @@ #define CFG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) /* SERDES */ -#define CONFIG_FSL_SERDES1 0xe3000 -#define CONFIG_FSL_SERDES2 0xe3100 +#define CFG_FSL_SERDES1 0xe3000 +#define CFG_FSL_SERDES2 0xe3100 /* I2C */ #define CFG_SYS_I2C_NOPROBES { {0, 0x51} } @@ -178,33 +174,7 @@ #define CFG_SYS_PCIE2_MEM_PHYS 0xC8000000 #define CFG_SYS_PCIE2_IO_PHYS 0xD8000000 -/* - * TSEC - */ -#ifdef CONFIG_TSEC_ENET - -#define CONFIG_GMII /* MII PHY management */ - -#define CONFIG_TSEC1 - -#ifdef CONFIG_TSEC1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CFG_SYS_TSEC1_OFFSET 0x24000 -#define TSEC1_PHY_ADDR 2 -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC1_PHYIDX 0 -#endif - -#ifdef CONFIG_TSEC2 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC2_PHY_ADDR 0x1c -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_PHYIDX 0 -#endif -#endif - #ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC_PIN_MUX #define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC83xx_ESDHC_ADDR #endif @@ -223,16 +193,10 @@ * Environment Configuration */ -#define CONFIG_NETDEV "eth1" - -#define CONFIG_HOSTNAME "mpc837x_rdb" -#define CONFIG_ROOTPATH "/nfsroot" - /* U-Boot image on TFTP server */ -#define CONFIG_UBOOTPATH "u-boot.bin" -#define CONFIG_FDTFILE "mpc8379_rdb.dtb" +#define FDTFILE "mpc8379_rdb.dtb" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" CONFIG_NETDEV "\0" \ +#define CFG_EXTRA_ENV_SETTINGS \ + "netdev=eth1\0" \ "uboot=" CONFIG_UBOOTPATH "\0" \ "tftpflash=tftp $loadaddr $uboot;" \ "protect off " __stringify(CONFIG_TEXT_BASE) \ @@ -246,7 +210,7 @@ "cmp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) \ " $filesize\0" \ "fdtaddr=780000\0" \ - "fdtfile=" CONFIG_FDTFILE "\0" \ + "fdtfile=" FDTFILE "\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=rootfs.ext2.gz.uboot\0" \ "console=ttyS0\0" \ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 780ee5ae865..6f3e298a249 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -18,11 +18,6 @@ #endif /* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ - -/* * Only possible on E500 Version 2 or newer cores. */ @@ -31,8 +26,6 @@ /* DDR Setup */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -283,33 +276,6 @@ #endif #define CFG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC1" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC2" -#define CONFIG_TSEC4 -#define CONFIG_TSEC4_NAME "eTSEC3" -#undef CONFIG_MPC85XX_FEC - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC3_PHY_ADDR 2 -#define TSEC4_PHY_ADDR 3 - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#endif /* CONFIG_TSEC_ENET */ - /* * Miscellaneous configurable options */ @@ -325,20 +291,10 @@ * Environment Configuration */ -#define CONFIG_IPADDR 192.168.1.253 - -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/nfsroot" -#define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ecc=off\0" \ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ "protect off " __stringify(CONFIG_TEXT_BASE) \ " +$filesize; " \ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index b1d6b15811d..9efae58ce90 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -24,8 +24,7 @@ #ifdef CONFIG_SPIFLASH #ifdef CONFIG_NXP_ESBC -#define CONFIG_RAMBOOT_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#define CFG_RESET_VECTOR_ADDRESS 0x110bfffc #else #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) #define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) @@ -53,11 +52,11 @@ #endif #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#define CFG_RESET_VECTOR_ADDRESS 0x110bfffc #endif -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#ifndef CFG_RESET_VECTOR_ADDRESS +#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc #endif /* High Level Configuration Options */ @@ -96,16 +95,9 @@ #endif #endif -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ - /* DDR Setup */ #define SPD_EEPROM_ADDRESS 0x52 -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - #ifndef __ASSEMBLY__ extern unsigned long get_sdram_size(void); #endif @@ -161,7 +153,6 @@ extern unsigned long get_sdram_size(void); #define CFG_SYS_NOR_FTIM3 0x0 #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ /* CFI for NOR Flash */ @@ -318,7 +309,6 @@ extern unsigned long get_sdram_size(void); #endif /* Serial Port */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_SYS_NS16550_CLK get_bus_freq(0) #define CFG_SYS_BAUDRATE_TABLE \ @@ -349,37 +339,6 @@ extern unsigned long get_sdram_size(void); /* eSPI - Enhanced SPI */ #endif -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 1 -#define TSEC2_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 2 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -/* TBI PHY configuration for SGMII mode */ -#define CONFIG_TSEC_TBICR_SETTINGS ( \ - TBICR_PHY_RESET \ - | TBICR_ANEG_ENABLE \ - | TBICR_FULL_DUPLEX \ - | TBICR_SPEED1_SET \ - ) - -#endif /* CONFIG_TSEC_ENET */ - #ifdef CONFIG_MMC #define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC85xx_ESDHC_ADDR #endif @@ -412,13 +371,10 @@ extern unsigned long get_sdram_size(void); * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "loadaddr=1000000\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 8b901ca47a0..28f53ae78a1 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -12,8 +12,7 @@ #define __CONFIG_H #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE @@ -21,13 +20,13 @@ #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000) #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ (0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc #endif /* High Level Configuration Options */ -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#ifndef CFG_RESET_VECTOR_ADDRESS +#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc #endif #define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS @@ -46,10 +45,9 @@ /* * Config the L3 Cache as L3 SRAM */ -#define CFG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#define CFG_SYS_INIT_L3_ADDR CONFIG_TEXT_BASE #ifdef CONFIG_PHYS_64BIT -#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ - CONFIG_RAMBOOT_TEXT_BASE) +#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_TEXT_BASE) #else #define CFG_SYS_INIT_L3_ADDR_PHYS CFG_SYS_INIT_L3_ADDR #endif @@ -62,7 +60,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -88,7 +85,6 @@ #define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CONFIG_FSL_CPLD #define CPLD_BASE 0xffdf0000 /* CPLD registers */ #ifdef CONFIG_PHYS_64BIT #define CPLD_BASE_PHYS 0xfffdf0000ull @@ -101,8 +97,6 @@ #define PIXIS_LBMAP_SHIFT 4 #define PIXIS_LBMAP_ALTBANK 0x40 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - /* Nand Flash */ #ifdef CONFIG_NAND_FSL_ELBC #define CFG_SYS_NAND_BASE 0xffa00000 @@ -133,7 +127,6 @@ #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS + 0x8000000} /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #ifdef CONFIG_PHYS_64BIT #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf @@ -308,16 +301,14 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH u-boot.bin #define __USB_PHY_TYPE utmi -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ "bank_intlv=cs0_cs1\0" \ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index bad34d9771e..19ae6399476 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -21,7 +21,6 @@ * for your console driver. */ -#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)" #define MTDPARTS_MTDOOPS "errlog" /* @@ -37,14 +36,5 @@ /* size in bytes reserved for initial data */ #include <asm/arch/config.h> -/* There is no PHY directly connected so don't ask it for link status */ - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ -#define CONFIG_PHY_BASE_ADR 0x01 -#endif /* CONFIG_CMD_NET */ #endif /* _CONFIG_SBX81LIFKW_H */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 9a9663b34ba..bdbf9d4758b 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -21,7 +21,6 @@ * for your console driver. */ -#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)" #define MTDPARTS_MTDOOPS "errlog" /* @@ -42,14 +41,5 @@ /* size in bytes reserved for initial data */ #include <asm/arch/config.h> -/* There is no PHY directly connected so don't ask it for link status */ - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ -#define CONFIG_PHY_BASE_ADR 0x01 -#endif /* CONFIG_CMD_NET */ #endif /* _CONFIG_SBX81LIFXCAT_H */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 623d4cf5562..7ee46abffdb 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -28,7 +28,7 @@ #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC +#define CFG_RESET_VECTOR_ADDRESS 0x30000FFC #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) #define CFG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) @@ -36,7 +36,7 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC +#define CFG_RESET_VECTOR_ADDRESS 0x30000FFC #define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CFG_SYS_MMC_U_BOOT_DST (0x30000000) #define CFG_SYS_MMC_U_BOOT_START (0x30000000) @@ -45,8 +45,8 @@ #endif /* CONFIG_RAMBOOT_PBL */ -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#ifndef CFG_RESET_VECTOR_ADDRESS +#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc #endif /* @@ -87,16 +87,13 @@ #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000) #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ (0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc #endif /* * These can be toggled for performance analysis, otherwise use default. */ #define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif /* * Config the L3 Cache as L3 SRAM @@ -112,7 +109,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #if defined(CONFIG_TARGET_T1024RDB) @@ -158,8 +154,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} #ifdef CONFIG_TARGET_T1024RDB @@ -271,7 +265,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #ifdef CONFIG_PHYS_64BIT #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf @@ -423,8 +416,6 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi #ifdef CONFIG_ARCH_T1024 @@ -439,11 +430,11 @@ "fdtfile=t1023rdb/t1023rdb.dtb\0" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ARCH_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ "netdev=eth0\0" \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index b6938056bbe..f196bd76e6e 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -20,13 +20,7 @@ #ifdef CONFIG_MTD_RAW_NAND #ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. - */ -#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + \ - CONFIG_U_BOOT_HDR_SIZE) +#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + (16 << 10)) #else #define CFG_SYS_NAND_U_BOOT_SIZE (768 << 10) #endif @@ -35,7 +29,7 @@ #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC +#define CFG_RESET_VECTOR_ADDRESS 0x30000FFC #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) #define CFG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) @@ -43,7 +37,7 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC +#define CFG_RESET_VECTOR_ADDRESS 0x30000FFC #define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CFG_SYS_MMC_U_BOOT_DST (0x30000000) #define CFG_SYS_MMC_U_BOOT_START (0x30000000) @@ -54,8 +48,8 @@ /* High Level Configuration Options */ -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#ifndef CFG_RESET_VECTOR_ADDRESS +#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc #endif #define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS @@ -64,9 +58,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif /* * Config the L3 Cache as L3 SRAM @@ -86,7 +77,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -126,8 +116,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} /* CPLD on IFC */ @@ -139,24 +127,10 @@ #define CPLD_LBMAP_RESET 0xFF #define CPLD_LBMAP_SHIFT 0x03 -#if defined(CONFIG_TARGET_T1042RDB_PI) -#define CPLD_DIU_SEL_DFP 0x80 -#elif defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) #define CPLD_DIU_SEL_DFP 0xc0 #endif -#if defined(CONFIG_TARGET_T1040D4RDB) -#define CPLD_INT_MASK_ALL 0xFF -#define CPLD_INT_MASK_THERM 0x80 -#define CPLD_INT_MASK_DVI_DFP 0x40 -#define CPLD_INT_MASK_QSGMII1 0x20 -#define CPLD_INT_MASK_QSGMII2 0x10 -#define CPLD_INT_MASK_SGMI1 0x08 -#define CPLD_INT_MASK_SGMI2 0x04 -#define CPLD_INT_MASK_TDMR1 0x02 -#define CPLD_INT_MASK_TDMR2 0x01 -#endif - #define CFG_SYS_CPLD_BASE 0xffdf0000 #define CFG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CFG_SYS_CPLD_BASE) #define CFG_SYS_CSPR2_EXT (0xf) @@ -249,7 +223,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 @@ -279,16 +252,12 @@ #define I2C_MUX_PCA_ADDR 0x70 #define I2C_MUX_CH_DEFAULT 0x8 -#if defined(CONFIG_TARGET_T1042RDB_PI) || \ - defined(CONFIG_TARGET_T1040D4RDB) || \ - defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) /* * RTC configuration */ #define CFG_SYS_I2C_RTC_ADDR 0x68 -/*DVI encoder*/ -#define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75 #endif /* @@ -365,36 +334,16 @@ #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_FMAN_ENET -#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB) -#define CFG_SYS_SGMII1_PHY_ADDR 0x03 -#elif defined(CONFIG_TARGET_T1040D4RDB) -#define CFG_SYS_SGMII1_PHY_ADDR 0x01 -#elif defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) #define CFG_SYS_SGMII1_PHY_ADDR 0x02 #define CFG_SYS_SGMII2_PHY_ADDR 0x03 #define CFG_SYS_SGMII3_PHY_ADDR 0x01 #endif -#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB) -#define CFG_SYS_RGMII1_PHY_ADDR 0x04 -#define CFG_SYS_RGMII2_PHY_ADDR 0x05 -#else #define CFG_SYS_RGMII1_PHY_ADDR 0x01 #define CFG_SYS_RGMII2_PHY_ADDR 0x02 #endif -/* Enable VSC9953 L2 Switch driver on T1040 SoC */ -#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB) -#ifdef CONFIG_TARGET_T1040RDB -#define CFG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 -#define CFG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 -#else -#define CFG_SYS_FM1_QSGMII11_PHY_ADDR 0x08 -#define CFG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c -#endif -#endif -#endif - /* * Miscellaneous configurable options */ @@ -413,30 +362,20 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #define __USB_PHY_TYPE utmi #define RAMDISKFILE "t104xrdb/ramdisk.uboot" -#ifdef CONFIG_TARGET_T1040RDB -#define FDTFILE "t1040rdb/t1040rdb.dtb" -#elif defined(CONFIG_TARGET_T1042RDB_PI) -#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" -#elif defined(CONFIG_TARGET_T1042RDB) -#define FDTFILE "t1042rdb/t1042rdb.dtb" -#elif defined(CONFIG_TARGET_T1040D4RDB) -#define FDTFILE "t1042rdb/t1040d4rdb.dtb" -#elif defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) #define FDTFILE "t1042rdb/t1042d4rdb.dtb" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index a93e05dd4d2..2023d7497f6 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -13,7 +13,7 @@ #include <linux/stringify.h> -#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ +#define CFG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ /* High Level Configuration Options */ @@ -30,7 +30,7 @@ #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CFG_RESET_VECTOR_ADDRESS 0x200FFC #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) #define CFG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) @@ -38,7 +38,7 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CFG_RESET_VECTOR_ADDRESS 0x200FFC #define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CFG_SYS_MMC_U_BOOT_DST (0x00200000) #define CFG_SYS_MMC_U_BOOT_START (0x00200000) @@ -52,18 +52,11 @@ #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000) #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ (0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc #endif -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#ifndef CFG_RESET_VECTOR_ADDRESS +#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc #endif /* @@ -78,7 +71,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ @@ -119,8 +111,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000, CFG_SYS_FLASH_BASE_PHYS} @@ -247,7 +237,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 @@ -421,18 +410,16 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:" \ "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index cf65a0da188..f213d2de770 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -13,7 +13,7 @@ #include <linux/stringify.h> -#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ +#define CFG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ /* High Level Configuration Options */ @@ -30,7 +30,7 @@ #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CFG_RESET_VECTOR_ADDRESS 0x200FFC #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) #define CFG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) @@ -38,7 +38,7 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CFG_RESET_VECTOR_ADDRESS 0x200FFC #define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CFG_SYS_MMC_U_BOOT_DST (0x00200000) #define CFG_SYS_MMC_U_BOOT_START (0x00200000) @@ -52,18 +52,11 @@ #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000) #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ (0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc #endif -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#ifndef CFG_RESET_VECTOR_ADDRESS +#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc #endif /* @@ -78,7 +71,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ @@ -114,8 +106,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS } /* CPLD on IFC */ @@ -212,7 +202,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 @@ -387,18 +376,16 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:" \ "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index b51762264ad..506f1b7e268 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -12,18 +12,17 @@ #include <linux/stringify.h> -#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ +#define CFG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #ifdef CONFIG_RAMBOOT_PBL #ifndef CONFIG_SDCARD -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc #else #define RESET_VECTOR_OFFSET 0x27FFC #define BOOT_PAGE_OFFSET 0x27000 #ifdef CONFIG_SDCARD -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CFG_RESET_VECTOR_ADDRESS 0x200FFC #define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CFG_SYS_MMC_U_BOOT_DST 0x00200000 #define CFG_SYS_MMC_U_BOOT_START 0x00200000 @@ -35,20 +34,13 @@ /* High Level Configuration Options */ -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#ifndef CFG_RESET_VECTOR_ADDRESS +#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc #endif #define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS /* - * These can be toggled for performance analysis, otherwise use default. - */ -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - -/* * Config the L3 Cache as L3 SRAM */ #define CFG_SYS_INIT_L3_ADDR 0xFFFC0000 @@ -60,7 +52,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -71,7 +62,6 @@ #define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 @@ -138,8 +128,6 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #define HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ @@ -184,8 +172,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000, CFG_SYS_FLASH_BASE_PHYS} @@ -382,13 +368,13 @@ #define CTRL_INTLV_PREFERED cacheline #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:" \ "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/alt.h b/include/configs/alt.h index fe303fda78a..8f03762583e 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -20,20 +20,17 @@ #define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0x1 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x1 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "usb_pgood_delay=2000\0" diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 755f7fae3e4..1f473b5a150 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -78,7 +78,7 @@ #ifndef CONFIG_SPL_BUILD #include <environment/ti/dfu.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "fdtfile=undefined\0" \ "finduuid=part uuid mmc 0:2 uuid\0" \ diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index 7c5e7ce475e..a8fa61c7e50 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -45,7 +45,7 @@ "main_pcba_aux_3=0\0" \ "main_pcba_aux_4=0\0" \ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ AM335XX_BOARD_FDTFILE \ MEM_LAYOUT_ENV_SETTINGS \ BOOTENV \ @@ -115,7 +115,6 @@ } #define CFG_SYS_NAND_ECCSIZE 512 #define CFG_SYS_NAND_ECCBYTES 26 -#define MTDIDS_DEFAULT "nand0=nand.0" #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h index abd868c1453..e2beaf27185 100644 --- a/include/configs/am335x_igep003x.h +++ b/include/configs/am335x_igep003x.h @@ -20,7 +20,7 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "bootdir=/boot\0" \ "bootfile=zImage\0" \ diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 452887d6995..ee6f62275a8 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -20,10 +20,8 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -#define CONFIG_HSMMC2_8BIT - #ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "kloadaddr=0x84000000\0" \ "fdtaddr=0x85000000\0" \ diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h index 342a068c855..f3d3d18c055 100644 --- a/include/configs/am335x_sl50.h +++ b/include/configs/am335x_sl50.h @@ -30,7 +30,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ AM335XX_BOARD_FDTFILE \ MEM_LAYOUT_ENV_SETTINGS \ BOOTENV diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index c57a0ddc21d..b75c6483883 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -38,7 +38,7 @@ #endif /* CONFIG_MTD_RAW_NAND */ /* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \ "fdtfile=am3517-evm.dtb\0" \ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 7659c1cc061..a2f73c47543 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -8,7 +8,7 @@ #ifndef __CONFIG_AM43XX_EVM_H #define __CONFIG_AM43XX_EVM_H -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ +#define CFG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ #define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include <asm/arch/omap.h> @@ -66,7 +66,7 @@ #ifndef CONFIG_SPL_BUILD #include <environment/ti/dfu.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "fdtfile=undefined\0" \ "finduuid=part uuid mmc 0:2 uuid\0" \ @@ -152,7 +152,7 @@ #if defined(CONFIG_TI_SECURE_DEVICE) /* Avoid relocating onto firewalled area at end of DRAM */ -#define CONFIG_PRAM (64 * 1024) +#define CFG_PRAM (64 * 1024) #endif /* CONFIG_TI_SECURE_DEVICE */ #endif /* __CONFIG_AM43XX_EVM_H */ diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index dacfd41cced..ba91f2b0545 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -35,9 +35,6 @@ #include <configs/ti_omap5_common.h> -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - /* CPSW Ethernet */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ diff --git a/include/configs/am62ax_evm.h b/include/configs/am62ax_evm.h new file mode 100644 index 00000000000..1bd900df7a9 --- /dev/null +++ b/include/configs/am62ax_evm.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration header file for K3 AM62Ax SoC family + * + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#ifndef __CONFIG_AM62AX_EVM_H +#define __CONFIG_AM62AX_EVM_H + +#include <linux/sizes.h> +#include <config_distro_bootcmd.h> +#include <environment/ti/mmc.h> +#include <environment/ti/k3_dfu.h> + +/* DDR Configuration */ +#define CFG_SYS_SDRAM_BASE1 0x880000000 + +#define PARTS_DEFAULT \ + /* Linux partitions */ \ + "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \ + +/* U-Boot general configuration */ +#define EXTRA_ENV_AM62A7_BOARD_SETTINGS \ + "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ + "findfdt=" \ + "setenv name_fdt ${default_device_tree};" \ + "setenv fdtfile ${name_fdt}\0" \ + "name_kern=Image\0" \ + "console=ttyS2,115200n8\0" \ + "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \ + "${mtdparts}\0" \ + "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" + +/* U-Boot MMC-specific configuration */ +#define EXTRA_ENV_AM62A7_BOARD_SETTINGS_MMC \ + "boot=mmc\0" \ + "mmcdev=1\0" \ + "bootpart=1:2\0" \ + "bootdir=/boot\0" \ + "rd_spec=-\0" \ + "init_mmc=run args_all args_mmc\0" \ + "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \ + "get_overlay_mmc=" \ + "fdt address ${fdtaddr};" \ + "fdt resize 0x100000;" \ + "for overlay in $name_overlays;" \ + "do;" \ + "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && " \ + "fdt apply ${dtboaddr};" \ + "done;\0" \ + "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \ + "${bootdir}/${name_kern}\0" \ + "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \ + "${bootdir}/${name_fit}\0" \ + "partitions=" PARTS_DEFAULT + +/* Incorporate settings into the U-Boot environment */ +#define CFG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + DEFAULT_MMC_TI_ARGS \ + EXTRA_ENV_AM62A7_BOARD_SETTINGS \ + EXTRA_ENV_AM62A7_BOARD_SETTINGS_MMC \ + +/* Now for the remaining common defines */ +#include <configs/ti_armv7_common.h> + +#endif /* __CONFIG_AM62A7_EVM_H */ diff --git a/include/configs/am62x_evm.h b/include/configs/am62x_evm.h index 57f3f37908d..809d89119c4 100644 --- a/include/configs/am62x_evm.h +++ b/include/configs/am62x_evm.h @@ -55,7 +55,7 @@ "partitions=" PARTS_DEFAULT /* Incorporate settings into the U-Boot environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ EXTRA_ENV_AM625_BOARD_SETTINGS \ diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h index 25c71f00a20..26a7f2521ec 100644 --- a/include/configs/am64x_evm.h +++ b/include/configs/am64x_evm.h @@ -95,7 +95,7 @@ DFU_ALT_INFO_OSPI /* Incorporate settings into the U-Boot environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ EXTRA_ENV_AM642_BOARD_SETTINGS \ diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h index 0307426e4ab..33dd6cfdfa4 100644 --- a/include/configs/am65x_evm.h +++ b/include/configs/am65x_evm.h @@ -88,7 +88,7 @@ #endif /* Incorporate settings into the U-Boot environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ DEFAULT_FIT_TI_ARGS \ diff --git a/include/configs/amcore.h b/include/configs/amcore.h index ee0be972d24..648d30a5b24 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -8,11 +8,9 @@ #ifndef __AMCORE_CONFIG_H #define __AMCORE_CONFIG_H -#define CONFIG_HOSTNAME "AMCORE" - #define CFG_SYS_UART_PORT 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "upgrade_uboot=loady; " \ "protect off 0xffc00000 0xffc1ffff; " \ "erase 0xffc00000 0xffc1ffff; " \ diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index cf23837863b..73d8d245a96 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -14,9 +14,6 @@ #define USDHC2_BASE_ADDR 0x5b020000 /* Networking */ -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 #define MEM_LAYOUT_ENV_SETTINGS \ "fdt_addr_r=0x84000000\0" \ @@ -34,7 +31,7 @@ #define BOOTENV_RUN_NET_USB_START "" /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ "boot_file=Image\0" \ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index f0a02ae1795..71d4727ca98 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -13,7 +13,6 @@ #include "tegra124-common.h" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define FDT_MODULE "apalis-v1.2" @@ -33,12 +32,6 @@ func(PXE, pxe, na) \ func(DHCP, dhcp, na) -#undef CONFIG_IPADDR -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_SERVERIP -#define CONFIG_SERVERIP 192.168.10.1 - #define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \ "boot part 0 1 mmcpart 0; " \ "rootfs part 0 2 mmcpart 0; " \ diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index a3c86545f07..8a9f3ef75a7 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -15,7 +15,7 @@ #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 @@ -26,21 +26,13 @@ /* USB Configs */ /* Host */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -/* Client */ -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Framebuffer and LCD */ /* Command definition */ -#undef CONFIG_IPADDR -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_SERVERIP -#define CONFIG_SERVERIP 192.168.10.1 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ @@ -70,7 +62,7 @@ "ramdisk_addr_r=0x18400000\0" \ "scriptaddr=0x18280000\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "boot_file=zImage\0" \ "boot_script_dhcp=boot.scr\0" \ diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index 4f00b3bad3f..80204d706d1 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -20,7 +20,6 @@ * Apalis UART3: NVIDIA UARTB * Apalis UART4: NVIDIA UARTC */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define UBOOT_UPDATE \ diff --git a/include/configs/apple.h b/include/configs/apple.h index b06660add4f..fe7d11bcdb3 100644 --- a/include/configs/apple.h +++ b/include/configs/apple.h @@ -27,7 +27,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_DEVICE_SETTINGS \ BOOTENV diff --git a/include/configs/arbel.h b/include/configs/arbel.h index 60758b0ca02..8e27fb52a1c 100644 --- a/include/configs/arbel.h +++ b/include/configs/arbel.h @@ -12,7 +12,7 @@ #define CFG_SYS_INIT_RAM_SIZE 0x8000 /* Default environemnt variables */ -#define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \ +#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" \ diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 6faf544d21b..286435d6f84 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -11,8 +11,6 @@ #ifndef __ARISTAINETOS2_CONFIG_H #define __ARISTAINETOS2_CONFIG_H -#define CONFIG_HOSTNAME "aristainetos2" - #if (CONFIG_SYS_BOARD_VERSION == 5) #define CONSOLE_DEV "ttymxc1" #elif (CONFIG_SYS_BOARD_VERSION == 6) @@ -28,7 +26,7 @@ /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 #ifdef CONFIG_IMX_HAB #define HAB_EXTRA_SETTINGS \ @@ -96,7 +94,7 @@ "done\0" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "disable_giga=yes\0" \ "usb_pgood_delay=2000\0" \ "nor_bootdelay=-2\0" \ @@ -415,12 +413,12 @@ /* DMA stuff, needed for GPMI/MXS NAND support */ /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* UBI support */ -#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \ +#define CFG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \ "sysnum:dw,panel:sw,ipaddr:iw,serverip:iw" #endif /* __ARISTAINETOS2_CONFIG_H */ diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 7a244769e30..b56effcd411 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -16,9 +16,9 @@ /* Miscellaneous configurable options */ -#define CONFIG_SMP_PEN_ADDR 0x02020000 +#define CFG_SMP_PEN_ADDR 0x02020000 /* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */ -#define CONFIG_ARM_GIC_BASE_ADDRESS 0x10480000 +#define CFG_ARM_GIC_BASE_ADDRESS 0x10480000 #endif /* __CONFIG_H */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 62aa99342a0..65224324fbc 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -38,16 +38,6 @@ #error No card type defined! #endif -/* - * CONFIG_RAM defines if u-boot is loaded via BDM (or started from - * a different bootloader that has already performed RAM setup) or - * started directly from flash, which is the regular case for production - * boards. - */ -#ifdef CONFIG_RAM -#define CONFIG_MONITOR_IS_IN_RAM -#endif - /* I2C */ /* @@ -69,21 +59,6 @@ #define CFG_SYS_UART_PORT (2) #define CFG_SYS_UART2_ALT3_GPIO -/* - * Configuration for environment - * Environment is located in the last sector of the flash - */ - -#ifndef CONFIG_MONITOR_IS_IN_RAM -#else -/* - * environment in RAM - This is used to use a single PC-based application - * to load an image, load U-Boot, load an environment and then start U-Boot - * to execute the commands from the environment. Feedback is done via setting - * and reading memory locations. - */ -#endif - /* here we put our FPGA configuration... */ /* Define user parameters that have to be customized most likely */ @@ -96,7 +71,7 @@ * u-boot: 'set' command */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loaderversion=11\0" \ "card_id="__stringify(ASTRO_ID)"\0" \ "alterafile=0\0" \ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 56247e390bf..39f6ff8a725 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -34,13 +34,6 @@ #endif -/* Ethernet */ -#define CONFIG_DM9000_BASE 0x30000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_DM9000_USE_16BIT -#define CONFIG_DM9000_NO_SROM - /* USB */ #define CFG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index afdb74785f8..4101440ff5d 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -36,7 +36,7 @@ /* Address and size of Primary Environment Sector */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ "update=" \ "protect off ${monitor_base} +${filesize};" \ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 0f9e2cfb582..c59d4bb38ca 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -28,7 +28,7 @@ #define CFG_SYS_NAND_READY_PIN GPIO_PIN_PD(5) #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index 03e04e6e680..b566ecf296f 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -49,9 +49,6 @@ */ #define CFG_SYS_FLASH_BANKS_SIZES {0x4000000} -/* max number of sectors on one chip */ -#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) - /* environments */ /* SPI FLASH */ @@ -85,7 +82,7 @@ func(RAM, ram, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x00080000\0" \ "pxefile_addr_r=0x01f00000\0" \ "scriptaddr=0x01f00000\0" \ diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index 04dc50b1cb2..a82dfc90294 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -39,7 +39,7 @@ /* * Environment settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "upgrade=if mmc rescan && " \ "fatload mmc 0:1 ${loadaddr} u-boot-update.img && " \ "iminfo ${loadaddr} && source ${loadaddr}; then; else echo " \ diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 6f6552e6dc3..e7946389eff 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -49,7 +49,7 @@ #define NANDARGS "" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "boot_fdt=try\0" \ "bootpart=0:2\0" \ diff --git a/include/configs/bayleybay.h b/include/configs/bayleybay.h index b347125f2fa..b0df328cd84 100644 --- a/include/configs/bayleybay.h +++ b/include/configs/bayleybay.h @@ -12,7 +12,7 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,usbkbd\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial,usbkbd\0" \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/bcm_ns3.h b/include/configs/bcm_ns3.h index b5469880fe2..47de4bc2013 100644 --- a/include/configs/bcm_ns3.h +++ b/include/configs/bcm_ns3.h @@ -9,8 +9,6 @@ #include <linux/sizes.h> -#define CONFIG_HOSTNAME "NS3" - /* Physical Memory Map */ #define V2M_BASE 0x80000000 #define PHYS_SDRAM_1 V2M_BASE @@ -795,7 +793,7 @@ QSPI_FLASH \ FLASH_IMAGES -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ARCH_ENV_SETTINGS #endif /* __BCM_NS3_H */ diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index 57360b60ca9..d1de3561af6 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -131,7 +131,7 @@ extern phys_addr_t prior_stage_fdt_address; /* * Enable in-place RFS with this initrd_high setting. */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdtsaveaddr=" __stringify(CONFIG_SYS_FDT_SAVE_ADDRESS) "\0" \ "initrd_high=0xffffffff\0" \ "fdt_high=0xffffffff\0" diff --git a/include/configs/beacon-rzg2m.h b/include/configs/beacon-rzg2m.h index 2713b158438..65c01835cc6 100644 --- a/include/configs/beacon-rzg2m.h +++ b/include/configs/beacon-rzg2m.h @@ -8,9 +8,9 @@ #include "rcar-gen3-common.h" -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "usb_pgood_delay=2000\0" \ "script=boot.scr\0" \ "image=Image\0" \ diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 6b5f650811b..e622b7127e3 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -10,20 +10,12 @@ #include "tegra30-common.h" -/* VDD core PMIC */ -#define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 - /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Beaver" +#define CFG_TEGRA_BOARD_STRING "NVIDIA Beaver" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/bitmain_antminer_s9.h b/include/configs/bitmain_antminer_s9.h index 556bfa08ebb..3662668c6a6 100644 --- a/include/configs/bitmain_antminer_s9.h +++ b/include/configs/bitmain_antminer_s9.h @@ -9,7 +9,7 @@ #define CFG_SYS_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_SIZE 0x40000000 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "pxefile_addr_r=0x2000000\0" \ "scriptaddr=0x3000000\0" \ "kernel_addr_r=0x2000000\0" \ diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index 0842a4a8f54..5df8d03c706 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -57,7 +57,7 @@ /* boot command, including the target-defined one if any */ /* Extra env settings (including the target-defined ones if any) */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BK4_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ diff --git a/include/configs/blanche.h b/include/configs/blanche.h index cb28ae28dd3..d4e0f677e67 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -22,10 +22,7 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* FLASH */ -#if !defined(CONFIG_MTD_NOR_FLASH) -#define CONFIG_SH_QSPI_BASE 0xE6B10000 -#else -#define CONFIG_FLASH_SHOW_PROGRESS 45 +#if defined(CONFIG_MTD_NOR_FLASH) #define CFG_SYS_FLASH_BASE 0x00000000 #define CFG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ #define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) } diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 2c5236aa58b..236d720a55a 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -67,7 +67,7 @@ MMC_TGTS \ #define LOAD_OFFSET(x) 0x8##x -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BUR_COMMON_ENV \ "verify=no\0" \ "scraddr=" __stringify(LOAD_OFFSET(0000000)) "\0" \ diff --git a/include/configs/brppt2.h b/include/configs/brppt2.h index d35c7c4a591..38c98c5e21c 100644 --- a/include/configs/brppt2.h +++ b/include/configs/brppt2.h @@ -16,8 +16,6 @@ #define CFG_SYS_PL310_BASE L2_PL310_BASE #endif /* !CONFIG_SYS_L2CACHE_OFF */ -#define CONFIG_MXC_GPT_HCLK - /* MMC */ /* Boot */ @@ -26,7 +24,7 @@ /* Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BUR_COMMON_ENV \ "cfgaddr=0x106F0000\0" \ "scraddr=0x10700000\0" \ @@ -80,10 +78,7 @@ BUR_COMMON_ENV \ #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE -/* Ethernet */ -#define CONFIG_FEC_FIXED_SPEED _1000BASET - /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_BRPP2_IMX6_H */ diff --git a/include/configs/brsmarc1.h b/include/configs/brsmarc1.h index f9908352b0d..ffb4cd3027a 100644 --- a/include/configs/brsmarc1.h +++ b/include/configs/brsmarc1.h @@ -24,7 +24,7 @@ #define V_SCLK (V_OSCK) /* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BUR_COMMON_ENV \ "scradr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "cfgscr=mw ${dtbaddr} 0;" \ diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h index 410b3e641c5..9ca6d6f863d 100644 --- a/include/configs/brxre1.h +++ b/include/configs/brxre1.h @@ -20,7 +20,7 @@ #define V_SCLK (V_OSCK) /* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BUR_COMMON_ENV \ "scradr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "bootaddr=0x80001100\0" \ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 3e0b4250788..ab57e14392d 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -19,7 +19,7 @@ #endif /* CONFIG_DM */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ +#define CFG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ /* Timer information */ #define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 474ad69d996..9dcacad2fc0 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -14,13 +14,13 @@ /* SPL config */ #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x00120000 +#define CFG_MALLOC_F_ADDR 0x00120000 #endif /* CONFIG_SPL_BUILD */ /* ENET1 connects to base board and MUX with ESAI */ -#define CONFIG_FEC_ENET_DEV 1 -#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CFG_FEC_ENET_DEV 1 +#define CFG_FEC_MXC_PHYADDR 0x0 /* EEPROM */ #define EEPROM_I2C_BUS 0 /* I2C0 */ @@ -60,15 +60,15 @@ "${loadaddr} ${m4_0_image}\0" \ "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \ -#define CONFIG_MFG_ENV_SETTINGS \ +#define CFG_MFG_ENV_SETTINGS \ MFG_ENV_SETTINGS_DEFAULT \ "initrd_addr=0x83100000\0" \ "initrd_high=0xffffffffffffffff\0" \ "emmc_dev=0\0" /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_MFG_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ + CFG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \ AHAB_ENV \ ENV_COMMON \ diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 35c5a4f1226..82729eb95cf 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -10,24 +10,16 @@ #include "tegra30-common.h" -/* VDD core PMIC */ -#define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 - /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu" +#define CFG_TEGRA_BOARD_STRING "NVIDIA Cardhu" #define BOARD_EXTRA_ENV_SETTINGS \ "board_name=cardhu-a04\0" \ "fdtfile=tegra30-cardhu-a04.dtb\0" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index 55e2d744c4a..fbd38b77fe5 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -16,15 +16,11 @@ #include "tegra124-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "CEI tk1-som" +#define CFG_TEGRA_BOARD_STRING "CEI tk1-som" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 6f3396bad4c..98d4d8cf4bd 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -12,8 +12,7 @@ #include <asm/arch/imx-regs.h> #ifdef CONFIG_SPL_BUILD -#define CONFIG_SERIAL_LPUART_BASE 0x5a060000 -#define CONFIG_MALLOC_F_ADDR 0x00120000 +#define CFG_MALLOC_F_ADDR 0x00120000 #endif @@ -42,7 +41,7 @@ #define FEC0_RESET IMX_GPIO_NR(2, 5) #define FEC0_PDOMAIN "conn_enet0" -#define CONFIG_MFG_ENV_SETTINGS \ +#define CFG_MFG_ENV_SETTINGS \ "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ "rdinit=/linuxrc " \ "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ @@ -55,8 +54,8 @@ "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_MFG_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ + CFG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \ "script=boot.scr\0" \ "image=Image\0" \ @@ -118,6 +117,6 @@ #define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */ /* Networking */ -#define CONFIG_FEC_MXC_PHYADDR -1 +#define CFG_FEC_MXC_PHYADDR -1 #endif /* __CGTQMX8_H */ diff --git a/include/configs/cherryhill.h b/include/configs/cherryhill.h index 726c43d35ea..d6ce70a96ae 100644 --- a/include/configs/cherryhill.h +++ b/include/configs/cherryhill.h @@ -8,7 +8,7 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,serial\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=usbkbd,serial\0" \ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index 1e5154af0a1..850eb892db7 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -25,7 +25,7 @@ "nand read ${loadaddr} NAND.kernel; " \ "bootz ${loadaddr} - ${fdt_addr}\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "fdt_addr=0x87800000\0" \ "boot_fdt=try\0" \ diff --git a/include/configs/chromebook_coral.h b/include/configs/chromebook_coral.h index d14c1d445b2..43fdc394416 100644 --- a/include/configs/chromebook_coral.h +++ b/include/configs/chromebook_coral.h @@ -13,8 +13,8 @@ #include <configs/x86-common.h> #include <configs/x86-chromebook.h> -#undef CONFIG_STD_DEVICES_SETTINGS -#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ +#undef CFG_STD_DEVICES_SETTINGS +#define CFG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" diff --git a/include/configs/chromebook_samus.h b/include/configs/chromebook_samus.h index e29be3fda4a..03a1033c573 100644 --- a/include/configs/chromebook_samus.h +++ b/include/configs/chromebook_samus.h @@ -15,8 +15,8 @@ #include <configs/x86-common.h> #include <configs/x86-chromebook.h> -#undef CONFIG_STD_DEVICES_SETTINGS -#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ +#undef CFG_STD_DEVICES_SETTINGS +#define CFG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" diff --git a/include/configs/ci20.h b/include/configs/ci20.h index 3329c24fa68..446d5c4f3da 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -17,11 +17,4 @@ /* NS16550-ish UARTs */ #define CFG_SYS_NS16550_CLK 48000000 -/* Ethernet: davicom DM9000 */ -#define CONFIG_DM9000_BASE 0xb6000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 2) - -/* Miscellaneous configuration options */ - #endif /* __CONFIG_CI20_H__ */ diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index 5c9004cbd93..280ae1e9cca 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -10,23 +10,23 @@ #include "mx7_common.h" -#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR +#define CFG_MXC_UART_BASE UART1_IPS_BASE_ADDR /* Network */ -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 /* ENET1 */ #define IMX_FEC_BASE ENET_IPS_BASE_ADDR /* PMIC */ -#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE3000_I2C_ADDR 0x08 #define CFG_SYS_I2C_PCA953X_ADDR 0x20 #define CFG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0" \ "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0" \ @@ -96,7 +96,7 @@ #endif /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif /* __CONFIG_H */ diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 9c9e9506dc6..062d3d87026 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -110,7 +110,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ RELOCATION_LIMITS_ENV_SETTINGS \ LOAD_ADDRESS_ENV_SETTINGS \ "console=ttyS0,115200\0" \ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 9df8baa8a96..7d0f2b6dc13 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -26,11 +26,11 @@ #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Serial console */ -#define CONFIG_MXC_UART_BASE UART4_BASE +#define CFG_MXC_UART_BASE UART4_BASE /* Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_addr_r=0x18000000\0" \ @@ -132,11 +132,11 @@ /* APBH DMA is required for NAND support */ /* Ethernet */ -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 /* USB */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Boot */ #define CFG_SYS_BOOTMAPSZ (8 << 20) diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index fcc17fc6b7c..743c8c86922 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -8,7 +8,7 @@ #ifndef __CONFIG_CM_T43_H #define __CONFIG_CM_T43_H -#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */ +#define CFG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */ #define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include <asm/arch/omap.h> @@ -36,14 +36,12 @@ * we don't need to do it twice. */ -#define CONFIG_HSMMC2_8BIT - #include <configs/ti_armv7_omap.h> #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x81200000\0" \ "bootm_size=0x8000000\0" \ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 6d6e2fc6962..cd50ffe98d0 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -43,27 +43,6 @@ #define CFG_SYS_UART_PORT (0) /* --- - * CONFIG_MONITOR_IS_IN_RAM defines if u-boot is started from a different - * bootloader residing in flash ('chainloading'); if you want to use - * chainloading or want to compile a u-boot binary that can be loaded into - * RAM via BDM set - * "#if 0" to "#if 1" - * You will need a first stage bootloader then, e. g. colilo or a working BDM - * cable (Background Debug Mode) - * - * Setting #if 0: u-boot will start from flash and relocate itself to RAM - * - * Please do not forget to modify the setting of CONFIG_TEXT_BASE - * in board/cobra5272/config.mk accordingly (#if 0: 0xffe00000; #if 1: 0x20000) - * - * --- - */ - -#if 0 -#define CONFIG_MONITOR_IS_IN_RAM /* monitor is started from a preloader */ -#endif - -/* --- * Configuration for environment * Environment is embedded in u-boot in the second sector of the flash * --- @@ -91,9 +70,6 @@ enter a valid image address in flash */ /* User network settings */ -#define CONFIG_IPADDR 192.168.100.2 /* default board IP address */ -#define CONFIG_SERVERIP 192.168.100.1 /* default tftp server IP address */ - #endif /*---*/ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index c0c3b4e0359..ba45ee4efd3 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -20,10 +20,6 @@ #define CFG_SYS_FSL_ESDHC_ADDR 0 #define CFG_SYS_FSL_USDHC_NUM 1 -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC) #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ @@ -83,7 +79,7 @@ #endif #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ UBI_BOOTCMD \ @@ -127,10 +123,8 @@ /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 - -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* USB Device Firmware Update support */ #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 6002d8d5c9f..2de116c59da 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -14,10 +14,6 @@ #define USDHC1_BASE_ADDR 0x5b010000 #define USDHC2_BASE_ADDR 0x5b020000 -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - #define MEM_LAYOUT_ENV_SETTINGS \ "fdt_addr_r=0x83000000\0" \ "kernel_addr_r=0x81000000\0" \ @@ -47,7 +43,7 @@ #undef BOOTENV_RUN_NET_USB_START #define BOOTENV_RUN_NET_USB_START "" -#define CONFIG_MFG_ENV_SETTINGS \ +#define CFG_MFG_ENV_SETTINGS \ "mfgtool_args=setenv bootargs ${consoleargs} " \ "rdinit=/linuxrc g_mass_storage.stall=0 " \ "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \ @@ -60,10 +56,10 @@ "${fdt_addr};\0" \ /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ AHAB_ENV \ BOOTENV \ - CONFIG_MFG_ENV_SETTINGS \ + CFG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \ MEM_LAYOUT_ENV_SETTINGS \ "boot_file=Image\0" \ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 60a3862a4d1..4b2841833b5 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -15,7 +15,7 @@ #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 @@ -23,19 +23,11 @@ /* USB Configs */ /* Host */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -/* Client */ -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Command definition */ -#undef CONFIG_IPADDR -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_SERVERIP -#define CONFIG_SERVERIP 192.168.10.1 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ @@ -64,7 +56,7 @@ "ramdisk_addr_r=0x18400000\0" \ "scriptaddr=0x18280000\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "boot_file=zImage\0" \ "boot_script_dhcp=boot.scr\0" \ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 32a79b02554..c568643977c 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -21,10 +21,6 @@ #define CFG_SYS_FSL_USDHC_NUM 2 #endif -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - #if defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC) #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ @@ -123,7 +119,7 @@ #endif #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ MODULE_EXTRA_ENV_SETTINGS \ @@ -171,9 +167,7 @@ /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 - -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index 2ba3c3bc87d..ea7d648eb6a 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -11,8 +11,6 @@ #include "tegra20-common.h" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA -#define CONFIG_TEGRA_UARTA_SDIO1 #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* NAND support */ diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index ffed71a2e82..7edb2c0b26d 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -21,7 +21,6 @@ * Colibri UART-B: NVIDIA UARTD * Colibri UART-C: NVIDIA UARTB */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define UBOOT_UPDATE \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index fa778ec9e2b..60f31389fd4 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -14,14 +14,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -/* NAND support */ - -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - -#define CONFIG_FDTADDR 0x84000000 - #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x82000000\0" \ @@ -55,7 +47,7 @@ #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ UBI_BOOTCMD \ diff --git a/include/configs/condor.h b/include/configs/condor.h index 819184996e6..50c8d173383 100644 --- a/include/configs/condor.h +++ b/include/configs/condor.h @@ -14,12 +14,12 @@ /* Environment compatibility */ /* SH Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0x1 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x1 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ /* XTAL_CLK : 33.33MHz */ diff --git a/include/configs/conga-qeval20-qa3-e3845.h b/include/configs/conga-qeval20-qa3-e3845.h index 823d37fc38c..60617e6fec2 100644 --- a/include/configs/conga-qeval20-qa3-e3845.h +++ b/include/configs/conga-qeval20-qa3-e3845.h @@ -12,15 +12,14 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "kernel-ver=4.4.0-22\0" \ "boot=zboot 03000000 0 04000000 ${filesize}\0" \ "upd_uboot=tftp 100000 conga/u-boot.rom;" \ diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 5da2778b67b..0e922b96644 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -21,10 +21,7 @@ * Environment Configuration */ -#define CONFIG_HOSTNAME "ccdc" -#define CONFIG_ROOTPATH "/opt/nfsroot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth1\0" \ "consoledev=ttyS1\0" \ "u-boot=u-boot.bin\0" \ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index f73004386fd..b4f49bf5289 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -15,7 +15,7 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/corstone1000.h b/include/configs/corstone1000.h index 8aec52d508e..3347c11792d 100644 --- a/include/configs/corstone1000.h +++ b/include/configs/corstone1000.h @@ -16,7 +16,7 @@ #define V2M_BASE 0x80000000 -#define CONFIG_PL011_CLOCK 50000000 +#define CFG_PL011_CLOCK 50000000 /* Physical Memory Map */ #define PHYS_SDRAM_1 (V2M_BASE) diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 8a61086ecc1..f2675e0ec86 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -28,8 +28,8 @@ #define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ /* serial console */ -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS +#define CFG_USART_BASE ATMEL_BASE_DBGU +#define CFG_USART_ID ATMEL_ID_SYS /* SDRAM */ #define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS6 diff --git a/include/configs/cougarcanyon2.h b/include/configs/cougarcanyon2.h index b64c7df1b25..31639e48da8 100644 --- a/include/configs/cougarcanyon2.h +++ b/include/configs/cougarcanyon2.h @@ -8,7 +8,7 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ "stdout=serial,vga\0" \ "stderr=serial,vga\0" diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h index ff74deb3d40..387bb8800e8 100644 --- a/include/configs/crownbay.h +++ b/include/configs/crownbay.h @@ -12,7 +12,7 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/crs3xx-98dx3236.h b/include/configs/crs3xx-98dx3236.h index 25bcc2a6841..6535730731a 100644 --- a/include/configs/crs3xx-98dx3236.h +++ b/include/configs/crs3xx-98dx3236.h @@ -13,7 +13,7 @@ /* Environment in SPI NOR flash */ /* Keep device tree and initrd in lower memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index a818a4b39f8..736af88a024 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -31,7 +31,7 @@ */ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ +#define CFG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ /* memtest start addr */ /* memtest will be run on 16MB */ @@ -145,7 +145,7 @@ #include <environment/ti/mmc.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ "bootpart=0:2\0" \ diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 24cf554649b..095554157fa 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -11,17 +11,13 @@ #include "tegra114-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore" +#define CFG_TEGRA_BOARD_STRING "NVIDIA Dalmore" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h index 4b31bbf4e11..c5781670864 100644 --- a/include/configs/dart_6ul.h +++ b/include/configs/dart_6ul.h @@ -18,7 +18,7 @@ #endif #ifdef CONFIG_CMD_NET -#define CONFIG_FEC_ENET_DEV 0 +#define CFG_FEC_ENET_DEV 0 #endif /* Environment settings */ @@ -28,7 +28,7 @@ #define MMC_ROOTFS_PART 2 /* Console configs */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ @@ -47,8 +47,8 @@ #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #define ENV_MMC \ "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \ @@ -68,7 +68,7 @@ "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \ /* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "console=ttymxc0,115200n8\0" \ "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \ diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index ef9c457e102..54de2d0d833 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -17,7 +17,7 @@ */ /* I2C */ -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE /* USB/EHCI configuration */ diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h index b9d03d253d9..c4ae397e3e6 100644 --- a/include/configs/db-88f6820-amc.h +++ b/include/configs/db-88f6820-amc.h @@ -17,7 +17,7 @@ /* NAND */ /* Keep device tree and initrd in lower memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index bba2b607aa8..2cbe4eb440b 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -11,14 +11,14 @@ */ /* I2C */ -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE /* Environment in SPI NOR flash */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ /* Keep device tree and initrd in lower memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index bf8b35102ad..5c6d7fa1b77 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -13,7 +13,7 @@ */ /* I2C */ -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE /* USB/EHCI configuration */ diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h index 84ea1baa997..0ee914e91d0 100644 --- a/include/configs/db-xc3-24g4xg.h +++ b/include/configs/db-xc3-24g4xg.h @@ -11,7 +11,7 @@ /* NAND */ /* Keep device tree and initrd in lower memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 66aa6d5c3c4..d85aeaafe51 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -41,19 +41,19 @@ /* * NAND chip timings */ -#define CONFIG_LPC32XX_NAND_SLC_WDR_CLKS 14 -#define CONFIG_LPC32XX_NAND_SLC_WWIDTH 66666666 -#define CONFIG_LPC32XX_NAND_SLC_WHOLD 200000000 -#define CONFIG_LPC32XX_NAND_SLC_WSETUP 50000000 -#define CONFIG_LPC32XX_NAND_SLC_RDR_CLKS 14 -#define CONFIG_LPC32XX_NAND_SLC_RWIDTH 66666666 -#define CONFIG_LPC32XX_NAND_SLC_RHOLD 200000000 -#define CONFIG_LPC32XX_NAND_SLC_RSETUP 50000000 +#define CFG_LPC32XX_NAND_SLC_WDR_CLKS 14 +#define CFG_LPC32XX_NAND_SLC_WWIDTH 66666666 +#define CFG_LPC32XX_NAND_SLC_WHOLD 200000000 +#define CFG_LPC32XX_NAND_SLC_WSETUP 50000000 +#define CFG_LPC32XX_NAND_SLC_RDR_CLKS 14 +#define CFG_LPC32XX_NAND_SLC_RWIDTH 66666666 +#define CFG_LPC32XX_NAND_SLC_RHOLD 200000000 +#define CFG_LPC32XX_NAND_SLC_RSETUP 50000000 /* * USB */ -#define CONFIG_USB_ISP1301_I2C_ADDR 0x2d +#define CFG_USB_ISP1301_I2C_ADDR 0x2d /* * U-Boot General Configurations @@ -67,7 +67,7 @@ * Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "ethaddr=00:01:90:00:C0:81\0" \ "dtbaddr=0x81000000\0" \ "nfsroot=/opt/projects/images/vladimir/oe/devkit3250/rootfs\0" \ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 46410595c2b..c522d334dcc 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -16,24 +16,13 @@ #include <configs/ti_omap3_common.h> -/* Hardware drivers */ -/* DM9000 */ -#define CONFIG_DM9000_BASE 0x2c000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) -#define CONFIG_DM9000_USE_16BIT 1 -#define CONFIG_DM9000_NO_SROM 1 -#undef CONFIG_DM9000_DEBUG - -/* TWL4030 */ - /* BOOTP/DHCP options */ #define MEM_LAYOUT_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV /* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "console=ttyO2,115200n8\0" \ "mmcdev=0\0" \ diff --git a/include/configs/dfi-bt700.h b/include/configs/dfi-bt700.h index 52f2d50118a..05389a435be 100644 --- a/include/configs/dfi-bt700.h +++ b/include/configs/dfi-bt700.h @@ -16,15 +16,14 @@ /* Use BayTrail internal HS UART which is memory-mapped */ #endif -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "kernel-ver=4.4.0-24\0" \ "boot=zboot 03000000 0 04000000 ${filesize}\0" \ "upd_uboot=usb reset;tftp 100000 dfi/u-boot.rom;" \ diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index f9b3d19480e..5cf73274d5e 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -28,24 +28,20 @@ #define CFG_SYS_FSL_USDHC_NUM 3 /* UART */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* USB Gadget (DFU, UMS) */ #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define DFU_DEFAULT_POLL_TIMEOUT 300 - -/* USB IDs */ -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 #endif #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200\0" \ "fdt_addr=0x18000000\0" \ "fdt_high=0xffffffff\0" \ diff --git a/include/configs/display5.h b/include/configs/display5.h index 7636d2869a9..3b96fff7d6f 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -34,10 +34,7 @@ #define CFG_SYS_SPI_ARGS_OFFS 0x140000 #define CFG_SYS_SPI_ARGS_SIZE 0x10000 -#define CONFIG_MXC_UART_BASE UART5_BASE - -/* I2C Configs */ -#define CONFIG_I2C_MULTI_BUS +#define CFG_MXC_UART_BASE UART5_BASE /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 @@ -167,7 +164,7 @@ "sf write ${loadaddr} 0x0 ${filesize};" \ "fi\0" \ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ PARTS_DEFAULT \ "gpio_recovery=93\0" \ "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \ @@ -279,8 +276,6 @@ /* Miscellaneous configurable options */ -#define CONFIG_STANDALONE_LOAD_ADDR 0x10001000 - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM @@ -293,5 +288,5 @@ /* The 0x120000 value corresponds to above SPI-NOR memory MAP */ #endif -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 015bc78648f..4842eccf40d 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -17,13 +17,6 @@ /* Remove or override few declarations from mv-common.h */ /* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#endif - -/* * Enable GPI0 support */ @@ -35,7 +28,7 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" \ diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 33ae7d654b0..999389197c6 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -22,16 +22,10 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "kernel=/boot/uImage\0" \ "initrd=/boot/uInitrd\0" \ "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_DOCKSTAR_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index ac3fcacc68e..ef1d5a11260 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -13,8 +13,7 @@ #include <environment/ti/dfu.h> -#define CONFIG_VERY_BIG_RAM -#define CONFIG_MAX_MEM_MAPPED 0x80000000 +#define CFG_MAX_MEM_MAPPED 0x80000000 #ifndef CONFIG_QSPI_BOOT /* MMC ENV related defines */ @@ -48,9 +47,6 @@ #include <configs/ti_omap5_common.h> -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - /* * Default to using SPI for environment, etc. * 0x000000 - 0x040000 : QSPI.SPL (256KiB) diff --git a/include/configs/draak.h b/include/configs/draak.h index 8140bc469c5..946f1d96469 100644 --- a/include/configs/draak.h +++ b/include/configs/draak.h @@ -13,7 +13,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/draco.h b/include/configs/draco.h index 4869008da44..4c67174572f 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -19,23 +19,23 @@ #define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */ #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ -#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ +#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ "button_dfu0=27\0" \ "led0=103,1,0\0" \ "led1=64,0,1\0" /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ +#define CFG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ /* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hostname=draco\0" \ "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ - CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - CONFIG_ENV_SETTINGS_V2 \ - CONFIG_ENV_SETTINGS_NAND_V2 + CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CFG_ENV_SETTINGS_V2 \ + CFG_ENV_SETTINGS_NAND_V2 #endif /* ! __CONFIG_DRACO_H */ diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index daf7ecd7975..73aec348458 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -28,6 +28,6 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS BOOTENV +#define CFG_EXTRA_ENV_SETTINGS BOOTENV #endif diff --git a/include/configs/dragonboard820c.h b/include/configs/dragonboard820c.h index 31cd8536de4..49970837111 100644 --- a/include/configs/dragonboard820c.h +++ b/include/configs/dragonboard820c.h @@ -26,7 +26,7 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x95000000\0" \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ diff --git a/include/configs/dragonboard845c.h b/include/configs/dragonboard845c.h index bd88c42a3ba..c1e590fae2a 100644 --- a/include/configs/dragonboard845c.h +++ b/include/configs/dragonboard845c.h @@ -13,7 +13,7 @@ #define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x5000000\0" \ "bootm_low=0x80000000\0" \ "bootcmd=bootm $prevbl_initrd_start_addr\0" diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index fbd83d629c0..85b47a15d71 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -17,17 +17,11 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "x_bootcmd_ethernet=ping 192.168.2.1\0" \ "x_bootcmd_usb=usb start\0" \ "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ "x_bootargs=console=ttyS0,115200\0" \ "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_DREAMPLUG_H */ diff --git a/include/configs/ds109.h b/include/configs/ds109.h index 8553ea0b95f..ea77abb4746 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -26,7 +26,7 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "x_bootcmd_ethernet=ping 192.168.1.2\0" \ "x_bootcmd_usb=usb start\0" \ "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ @@ -35,12 +35,4 @@ "ipaddr=192.168.1.5\0" \ "usb0Mode=host\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ -#define CONFIG_PHY_BASE_ADR 8 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_DS109_H */ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 76d1713fdc6..9446acba792 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -17,7 +17,7 @@ */ /* I2C */ -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE /* * mv-common.h should be defined after CMD configs since it used them @@ -43,7 +43,7 @@ /* Default Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "initrd_high=0xffffffff\0" \ "ramdisk_addr_r=0x8000000\0" \ "usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \ diff --git a/include/configs/durian.h b/include/configs/durian.h index 001596c00a4..9f11e18d34a 100644 --- a/include/configs/durian.h +++ b/include/configs/durian.h @@ -15,7 +15,7 @@ /* BOOT */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "load_kernel=ext4load scsi 0:1 0x90100000 uImage-2004\0" \ "load_fdt=ext4load scsi 0:1 0x95000000 ft2004-pci-64.dtb\0"\ "boot_fdt=bootm 0x90100000 -:- 0x95000000\0" \ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 21eab9b3a47..26e4ade34ee 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -14,8 +14,6 @@ #define CFG_SYS_UART_PORT (0) -#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ - /*----------------------------------------------------------------------* * Options * *----------------------------------------------------------------------*/ @@ -44,10 +42,6 @@ * Network * *----------------------------------------------------------------------*/ -#ifdef CONFIG_MCFFEC -#define CONFIG_OVERWRITE_ETHADDR_ONCE -#endif - /*------------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) @@ -84,7 +78,6 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE #define CFG_SYS_INT_FLASH_BASE 0xF0000000 @@ -145,13 +138,5 @@ #define CFG_SYS_DDRUA 0x05 #define CFG_SYS_PJPAR 0xFF -/*----------------------------------------------------------------------- - * I2C - */ - -#ifdef CONFIG_CMD_DATE -#define CONFIG_I2C_RTC_ADDR 0x68 -#endif - #endif /* _CONFIG_M5282EVB_H */ /*---------------------------------------------------------------------*/ diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index d1882a9646b..ad5944230a6 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -15,7 +15,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/efi-x86_app.h b/include/configs/efi-x86_app.h index 6061a6db0a4..843ed8b9d1d 100644 --- a/include/configs/efi-x86_app.h +++ b/include/configs/efi-x86_app.h @@ -8,9 +8,7 @@ #include <configs/x86-common.h> -#undef CONFIG_TPM_TIS_BASE_ADDRESS - -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=vidconsole\0" \ "stderr=vidconsole\0" diff --git a/include/configs/efi-x86_payload.h b/include/configs/efi-x86_payload.h index f50c2ce4dd0..c72b067c367 100644 --- a/include/configs/efi-x86_payload.h +++ b/include/configs/efi-x86_payload.h @@ -12,7 +12,7 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd,usbkbd\0" \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h index 89e071c0df6..78af42d0450 100644 --- a/include/configs/el6x_common.h +++ b/include/configs/el6x_common.h @@ -17,13 +17,13 @@ #define CFG_SYS_FSL_USDHC_NUM 2 /* PMIC */ -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 /* Commands */ -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "board=EL6Q\0" \ "cma_size="__stringify(EL6Q_CMA_SIZE)"\0" \ "chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0" \ diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 22e0fa5aabf..31c7e104f6b 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -12,14 +12,14 @@ #ifndef __RIOTBOARD_CONFIG_H #define __RIOTBOARD_CONFIG_H -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE #define CONSOLE_DEV "ttymxc1" #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 @@ -35,11 +35,11 @@ #if defined(CONFIG_ENV_IS_IN_MMC) /* RiOTboard */ -#define CONFIG_FDTFILE "imx6dl-riotboard.dtb" +#define FDTFILE "imx6dl-riotboard.dtb" #define CFG_SYS_FSL_USDHC_NUM 3 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) /* MarSBoard */ -#define CONFIG_FDTFILE "imx6q-marsboard.dtb" +#define FDTFILE "imx6q-marsboard.dtb" #define CFG_SYS_FSL_USDHC_NUM 2 #endif @@ -76,10 +76,10 @@ CONSOLE_STDIN_SETTINGS \ CONSOLE_STDOUT_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ - "fdtfile=" CONFIG_FDTFILE "\0" \ + "fdtfile=" FDTFILE "\0" \ "finduuid=part uuid mmc 0:1 uuid\0" \ BOOTENV diff --git a/include/configs/emsdp.h b/include/configs/emsdp.h index c2b921e7cb8..83aaa09cdbb 100644 --- a/include/configs/emsdp.h +++ b/include/configs/emsdp.h @@ -15,7 +15,7 @@ * Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "upgrade_image=u-boot.bin\0" \ "upgrade=emsdp rom unlock && " \ "fatload mmc 0 ${loadaddr} ${upgrade_image} && " \ diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 6647148c96f..d07b4e95364 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -56,7 +56,7 @@ #define BOARD_DFU_BUTTON_GPIO 27 #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ /* In dfu mode keep led1 on */ -#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ +#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ "button_dfu0=27\0" \ "button_dfu1=87\0" \ "led0=3,0,1\0" \ @@ -67,7 +67,7 @@ "led5=63,0,1\0" /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ +#define CFG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ #define EEPROM_ADDR_DDR3 0x90 #define EEPROM_ADDR_CHIP 0x120 @@ -93,8 +93,8 @@ "u-boot.env1 mtddev;" \ "rootfs mtddevubi" \ -#undef CONFIG_ENV_SETTINGS_NAND_V2 -#define CONFIG_ENV_SETTINGS_NAND_V2 \ +#undef CFG_ENV_SETTINGS_NAND_V2 +#define CFG_ENV_SETTINGS_NAND_V2 \ "nand_active_ubi_vol=rootfs_a\0" \ "rootfs_name=rootfs\0" \ "kernel_name=uImage\0"\ @@ -127,25 +127,15 @@ "bootm ${kloadaddr} - ${loadaddr}\0" \ COMMON_ENV_NAND_CMDS -#ifndef CONFIG_SPL_BUILD - -#define CONFIG_NAND_CS_INIT -#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800 -#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00 -#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00 -#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807 -#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e -#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80 - /* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hostname=etamin\0" \ "ubi_off=4096\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ - CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - CONFIG_ENV_SETTINGS_V2 \ - CONFIG_ENV_SETTINGS_NAND_V2 -#endif /* CONFIG_SPL_BUILD */ + CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CFG_ENV_SETTINGS_V2 \ + CFG_ENV_SETTINGS_NAND_V2 + #endif /* ! __CONFIG_ETAMIN_H */ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 52eb0be6761..182369def91 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -48,8 +48,7 @@ /* JFFS2 */ /* Ethernet */ -#define CONFIG_PHY_ID 0 -#define CONFIG_MACB_SEARCH_PHY +#define CFG_PHY_ID 0 /* MMC */ #ifdef CONFIG_CMD_MMC diff --git a/include/configs/evb_ast2500.h b/include/configs/evb_ast2500.h index bec1660cf48..f304929263e 100644 --- a/include/configs/evb_ast2500.h +++ b/include/configs/evb_ast2500.h @@ -14,7 +14,7 @@ #define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* Misc */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "" #endif /* __CONFIG_H */ diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h index c9c988b9374..e1cce58fa93 100644 --- a/include/configs/evb_ast2600.h +++ b/include/configs/evb_ast2600.h @@ -14,7 +14,7 @@ #define STR_HELPER(s) #s #define STR(s) STR_HELPER(s) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=" STR(CONFIG_SYS_LOAD_ADDR) "\0" \ "bootspi=fdt addr 20100000 && fdt header get fitsize totalsize && " \ "cp.b 20100000 ${loadaddr} ${fitsize} && bootm; " \ diff --git a/include/configs/evb_rv1108.h b/include/configs/evb_rv1108.h index 13e3cb2ffeb..e7d866551a5 100644 --- a/include/configs/evb_rv1108.h +++ b/include/configs/evb_rv1108.h @@ -11,8 +11,8 @@ /* * Default environment settings */ -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "ipaddr=172.16.12.50\0" \ "serverip=172.16.12.69\0" \ diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 81f450cde6c..e8c182bc2f3 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -10,17 +10,8 @@ #include "exynos-common.h" -/* SD/MMC configuration */ -#define CONFIG_MMC_DEFAULT_DEV 0 - #define DFU_DEFAULT_POLL_TIMEOUT 300 -/* USB Samsung's IDs */ -#define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 - /* Common environment variables */ #define ENV_ITB \ "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index dd322c2b3a7..ec09f6cc5de 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -27,8 +27,6 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 -#define CONFIG_RD_LVL - #define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_2 (CFG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) @@ -50,7 +48,7 @@ /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET -#define CONFIG_ENV_SROM_BANK 1 +#define CFG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/ /* Enable Time Command */ @@ -58,7 +56,6 @@ /* USB */ /* USB boot mode */ -#define CONFIG_USB_BOOTING #define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 @@ -94,7 +91,7 @@ #define EXYNOS_FDTFILE_SETTING #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ EXYNOS_DEVICE_SETTINGS \ EXYNOS_FDTFILE_SETTING \ MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index c9e0c13172c..8f2dac61cba 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -17,6 +17,5 @@ #define CFG_SYS_SPI_BASE 0x12D30000 #define FLASH_SIZE (4 << 20) -#define CONFIG_SPI_BOOTING #endif diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index 7a9307ccc3d..b75fe1b0a86 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -8,16 +8,14 @@ #ifndef __CONFIG_EXYNOS5420_H #define __CONFIG_EXYNOS5420_H -#define CONFIG_VAR_SIZE_SPL +#define CFG_IRAM_TOP 0x02074000 -#define CONFIG_IRAM_TOP 0x02074000 - -#define CONFIG_PHY_IRAM_BASE 0x02020000 +#define CFG_PHY_IRAM_BASE 0x02020000 /* * Low Power settings */ -#define CONFIG_LOWPOWER_FLAG 0x02020028 -#define CONFIG_LOWPOWER_ADDR 0x0202002C +#define CFG_LOWPOWER_FLAG 0x02020028 +#define CFG_LOWPOWER_ADDR 0x0202002C #endif /* __CONFIG_EXYNOS5420_H */ diff --git a/include/configs/exynos7420-common.h b/include/configs/exynos7420-common.h index cff910c1bd5..9971385848a 100644 --- a/include/configs/exynos7420-common.h +++ b/include/configs/exynos7420-common.h @@ -15,10 +15,6 @@ /* select serial console configuration */ -/* IRAM Layout */ -#define CONFIG_IRAM_BASE 0x02100000 -#define CONFIG_IRAM_SIZE 0x58000 -#define CONFIG_IRAM_END (CONFIG_IRAM_BASE + CONFIG_IRAM_SIZE) #define CPU_RELEASE_ADDR secondary_boot_addr /* select serial console configuration */ @@ -67,7 +63,7 @@ #define EXYNOS_FDTFILE_SETTING #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ EXYNOS_DEVICE_SETTINGS \ EXYNOS_FDTFILE_SETTING \ MEM_LAYOUT_ENV_SETTINGS diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 8672b9e9527..92c84cd8ce0 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -74,7 +74,7 @@ EXYNOS_FDTFILE_SETTING \ MEM_LAYOUT_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ EXTRA_ENV_SETTINGS #endif /* __CONFIG_EXYNOS78x0_COMMON_H */ diff --git a/include/configs/galileo.h b/include/configs/galileo.h index 472f236b9b6..0380ac287be 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -14,7 +14,7 @@ /* ns16550 UART is memory-mapped in Quark SoC */ -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h index 36dcee87c5f..855aaa1aa57 100644 --- a/include/configs/gazerbeam.h +++ b/include/configs/gazerbeam.h @@ -55,11 +55,7 @@ * Environment Configuration */ -/* TODO: Turn into string option and migrate to Kconfig */ -#define CONFIG_HOSTNAME "gazerbeam" -#define CONFIG_ROOTPATH "/opt/nfsroot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS1\0" \ "u-boot=u-boot.bin\0" \ diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h index 1458b187de2..49b058cb10d 100644 --- a/include/configs/ge_b1x5v2.h +++ b/include/configs/ge_b1x5v2.h @@ -13,9 +13,9 @@ #include "mx6_common.h" /* UART */ -#define CONFIG_MXC_UART_BASE UART3_BASE +#define CFG_MXC_UART_BASE UART3_BASE -#if CONFIG_MXC_UART_BASE == UART2_BASE +#if CFG_MXC_UART_BASE == UART2_BASE /* UART2 requires CONFIG_DEBUG_UART_BASE=0x21e8000 */ #define CONSOLE_DEVICE "ttymxc1" /* System on Module debug connector */ #else @@ -24,9 +24,8 @@ #endif /* USB */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Memory */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -36,7 +35,7 @@ #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Command definition */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=/boot/fitImage\0" \ "fdt_addr_r=0x18000000\0" \ "splash_addr_r=0x20000000\0" \ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index f62b8f175e1..32960fb9325 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -41,7 +41,7 @@ #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ NETWORKBOOT \ "image=/boot/fitImage\0" \ "dev=mmc\0" \ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 66eed9e14f8..b7de159c865 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -31,15 +31,9 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "kernel=/boot/uImage\0" \ "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_GOFLEXHOME_H */ diff --git a/include/configs/gose.h b/include/configs/gose.h index d1fe375a2c1..7ae0726518d 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -20,16 +20,16 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512u * 1024 * 1024) /* SH Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0x1 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x1 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" #endif /* __GOSE_H */ diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index dd6b22de7ba..8de4a36e931 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -17,11 +17,11 @@ #define CFG_SYS_SDRAM_SIZE (10 * 1024 * 1024) /* Network interface */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 #endif /* __GRPEACH_H */ diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 4954c5ca080..44b4595440e 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -23,19 +23,11 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "mtdids=nand0=orion_nand\0" \ "kernel=/boot/zImage\0" \ "fdt=/boot/guruplug-server-plus.dtb\0" \ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_GURUPLUG_H */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 4d0a78c6269..ebc5d03d0d5 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -16,7 +16,7 @@ #include "mx6_common.h" /* Serial */ -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE /* NAND */ @@ -30,15 +30,14 @@ /* * PMIC */ -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 -#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_LTC3676_I2C_ADDR 0x3c /* Various command support */ /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Miscellaneous configurable options */ @@ -57,7 +56,5 @@ /* Persistent Environment Config */ /* Environment */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.146 #endif /* __CONFIG_H */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 211dab4d233..cae7acdb70b 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -11,10 +11,9 @@ #include "tegra20-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony" +#define CFG_TEGRA_BOARD_STRING "NVIDIA Harmony" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: keyboard satellite board UART, default */ #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE diff --git a/include/configs/helios4.h b/include/configs/helios4.h index fc32487e1c7..7d81d1cf1e4 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -110,7 +110,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ RELOCATION_LIMITS_ENV_SETTINGS \ LOAD_ADDRESS_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 4aef0b4abd1..97bb439f735 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -8,7 +8,7 @@ #define CFG_SYS_BOOTMAPSZ (16 << 20) -#define CONFIG_PL011_CLOCK 150000000 +#define CFG_PL011_CLOCK 150000000 /* * Miscellaneous configurable options @@ -16,7 +16,7 @@ #define CFG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x20000000\0" \ "initrd_high=0x20000000\0" diff --git a/include/configs/hikey.h b/include/configs/hikey.h index d4280decc9f..36bf22b1870 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -42,7 +42,7 @@ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_name=Image\0" \ "kernel_addr_r=0x00080000\0" \ "fdtfile=hi6220-hikey.dtb\0" \ diff --git a/include/configs/hikey960.h b/include/configs/hikey960.h index fad1f980481..40d5e653c3f 100644 --- a/include/configs/hikey960.h +++ b/include/configs/hikey960.h @@ -28,7 +28,7 @@ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=Image\0" \ "fdtfile=hi3660-hikey960.dtb\0" \ "fdt_addr_r=0x10000000\0" \ diff --git a/include/configs/hsdk-4xd.h b/include/configs/hsdk-4xd.h index 59ea8960071..f59da417731 100644 --- a/include/configs/hsdk-4xd.h +++ b/include/configs/hsdk-4xd.h @@ -37,7 +37,7 @@ /* * Environment settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "upgrade=if mmc rescan && " \ "fatload mmc 0:1 ${loadaddr} u-boot-update.scr && " \ "iminfo ${loadaddr} && source ${loadaddr}; then; else echo " \ diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index fbfcded4712..2177fafcdc0 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -36,7 +36,7 @@ /* * Environment settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "upgrade=if mmc rescan && " \ "fatload mmc 0:1 ${loadaddr} u-boot-update.scr && " \ "iminfo ${loadaddr} && source ${loadaddr}; then; else echo " \ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 05192218d22..e1b62f78b21 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -18,21 +18,13 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "kernel=/boot/zImage\0" \ "fdt=/boot/ib62x0.dtb\0" \ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" /* - * Ethernet driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - -/* * SATA driver configuration */ #ifdef CONFIG_IDE diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index f2e3608d3a3..d372ffb802c 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -11,19 +11,9 @@ #include "mv-common.h" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "kernel=/boot/uImage\0" \ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" -/* - * Ethernet driver configuration - * - * This board has PCIe Wifi card, so allow Ethernet to be disabled - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 11 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_ICONNECT_H */ diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 36b6b95b84d..786b70fe064 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -24,7 +24,7 @@ #endif /* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "splashpos=m,m\0" \ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ @@ -116,9 +116,9 @@ /* UART */ #ifdef CONFIG_MXC_UART # ifdef CONFIG_MX6UL -# define CONFIG_MXC_UART_BASE UART1_BASE +# define CFG_MXC_UART_BASE UART1_BASE # else -# define CONFIG_MXC_UART_BASE UART4_BASE +# define CFG_MXC_UART_BASE UART4_BASE # endif #endif diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 4e23f1a2dc5..85c054451f3 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -8,7 +8,7 @@ #ifndef __IMX6LOGIC_CONFIG_H #define __IMX6LOGIC_CONFIG_H -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE #define CONSOLE_DEV "ttymxc0" #include "mx6_common.h" @@ -19,9 +19,9 @@ /* Ethernet Configs */ -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "bootm_size=0x10000000\0" \ @@ -117,8 +117,8 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif /* Falcon Mode */ diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h index 402f83c18ea..6c61b3f4480 100644 --- a/include/configs/imx6dl-mamoj.h +++ b/include/configs/imx6dl-mamoj.h @@ -20,7 +20,7 @@ /* Environment in MMC */ #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "scriptaddr=0x14000000\0" \ "fdt_addr_r=0x13000000\0" \ "kernel_addr_r=0x10008000\0" \ @@ -35,16 +35,16 @@ #include <config_distro_bootcmd.h> /* UART */ -#define CONFIG_MXC_UART_BASE UART3_BASE +#define CFG_MXC_UART_BASE UART3_BASE /* MMC */ /* Ethernet */ -#define CONFIG_FEC_MXC_PHYADDR 1 +#define CFG_FEC_MXC_PHYADDR 1 /* USB */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Falcon */ diff --git a/include/configs/imx6q-bosch-acc.h b/include/configs/imx6q-bosch-acc.h index 99da081cdae..2c998cdcfc7 100644 --- a/include/configs/imx6q-bosch-acc.h +++ b/include/configs/imx6q-bosch-acc.h @@ -45,7 +45,7 @@ "save_env=env save; env save\0" \ "altbootcmd=run handle_ustate; run switch_bootset; run save_env; run bootcmd\0" -#define CONFIG_ENV_FLAGS_LIST_STATIC \ +#define CFG_ENV_FLAGS_LIST_STATIC \ "bootset:bw," \ "clone_pending:bw," \ "endurance_test:bw," \ @@ -72,7 +72,7 @@ #endif /* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootconf=conf-imx6q-bosch-acc.dtb\0"\ "mmcfit_name=fitImage\0" \ "mmcloadfit=ext4load mmc ${mmcdev}:${fitpart} ${fit_addr} ${mmcfit_name}\0" \ @@ -110,7 +110,7 @@ #endif #endif -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif /* __IMX6Q_ACC_H */ diff --git a/include/configs/imx6ulz_smm_m2.h b/include/configs/imx6ulz_smm_m2.h index 2d9d3c34b0d..9da98d0af27 100644 --- a/include/configs/imx6ulz_smm_m2.h +++ b/include/configs/imx6ulz_smm_m2.h @@ -12,7 +12,7 @@ #include <linux/sizes.h> #include <linux/stringify.h> -#define CONFIG_MXC_UART_BASE UART4_BASE +#define CFG_MXC_UART_BASE UART4_BASE #ifndef CONFIG_SPL_BUILD @@ -54,7 +54,7 @@ #devtypel #instance " " /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ NANDARGS \ BOOTENV diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 76771fd66ce..106fbdb9053 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -10,9 +10,9 @@ #include "mx7_common.h" -#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR +#define CFG_MXC_UART_BASE UART1_IPS_BASE_ADDR -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS /* * Use: @@ -22,7 +22,7 @@ */ #define MY_CONFIG_BOOT_MODE "boot-mode=sd\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MY_CONFIG_BOOT_MODE \ "image=zImage\0" \ "console=ttymxc0\0" \ @@ -79,8 +79,6 @@ /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) - -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index c228cf7f37b..2641d7bc960 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -16,7 +16,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x912000 +#define CFG_MALLOC_F_ADDR 0x912000 /* For RAW image gives a error info not panic */ #endif @@ -63,7 +63,7 @@ BOOT_TARGET_DHCP(func) /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "script=boot.scr\0" \ "image=Image\0" \ @@ -136,9 +136,9 @@ #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /*__IMX8MM_CL_IOT_GATE_H*/ diff --git a/include/configs/imx8mm-mx8menlo.h b/include/configs/imx8mm-mx8menlo.h index 938c5406b82..a86bd76a3c7 100644 --- a/include/configs/imx8mm-mx8menlo.h +++ b/include/configs/imx8mm-mx8menlo.h @@ -9,8 +9,8 @@ #include <configs/verdin-imx8mm.h> /* Custom initial environment variables */ -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ "devtype=mmc\0" \ diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 03325e6c3a7..d85ae21e231 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -14,13 +14,13 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=Image\0" \ "console=ttymxc1,115200\0" \ diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index 80321cf2d8d..f7d2b660c1f 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -11,7 +11,7 @@ #include <asm/arch/imx-regs.h> #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ @@ -25,7 +25,7 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* Minimum 1 GiB DDR */ -#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR +#define CFG_MXC_UART_BASE UART3_BASE_ADDR /* PHY needs a longer autonegotiation timeout after reset */ #define PHY_ANEG_TIMEOUT 20000 @@ -34,7 +34,7 @@ #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \ "bootlimit=3\0" \ "devtype=mmc\0" \ diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 8a694c88a53..d5642b96495 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -24,7 +24,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif @@ -37,7 +37,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ @@ -61,6 +61,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 #endif diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index 41ab9307793..2158b0af74f 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -15,7 +15,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -# define CONFIG_MALLOC_F_ADDR 0x930000 +# define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif /* CONFIG_SPL_BUILD */ @@ -30,7 +30,7 @@ "ramdisk_addr_r=0x46400000\0" \ "scriptaddr=0x46000000\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "console=ttymxc1,115200\0" \ diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index 28ce834769c..5579a05d165 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -14,7 +14,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 #endif /* Enable Distro Boot */ @@ -25,7 +25,7 @@ func(USB, usb, 1) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "splblk=0x42\0" \ BOOTENV diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 85fd5e2371f..bb3dfe3fa0d 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -13,7 +13,7 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=Image\0" \ "ramdiskimage=rootfs.cpio.uboot\0" \ diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h index a768ff35510..e97b8e871d2 100644 --- a/include/configs/imx8mn_bsh_smm_s2.h +++ b/include/configs/imx8mn_bsh_smm_s2.h @@ -35,7 +35,7 @@ #devtypel #instance " " /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ NANDARGS \ BOOTENV diff --git a/include/configs/imx8mn_bsh_smm_s2pro.h b/include/configs/imx8mn_bsh_smm_s2pro.h index 035e5c7bd90..8619fdde7fd 100644 --- a/include/configs/imx8mn_bsh_smm_s2pro.h +++ b/include/configs/imx8mn_bsh_smm_s2pro.h @@ -22,7 +22,7 @@ "emmc_ack=1\0" \ /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ EMMCARGS \ BOOTENV diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index 024b86c7f1d..b759b834b80 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -32,7 +32,7 @@ "scriptaddr=0x40000000\0" \ "pxefile_addr_r=0x40100000\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=Image\0" \ BOOTENV \ "console=ttymxc1,115200\0" \ diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h index 4633843d1bb..205337948cf 100644 --- a/include/configs/imx8mn_var_som.h +++ b/include/configs/imx8mn_var_som.h @@ -37,7 +37,7 @@ "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ BOOTENV diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h index a585cbf87e4..80c2df9f30f 100644 --- a/include/configs/imx8mn_venice.h +++ b/include/configs/imx8mn_venice.h @@ -19,7 +19,7 @@ func(USB, usb, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "splblk=0x40\0" \ BOOTENV diff --git a/include/configs/imx8mp_dhcom_pdk2.h b/include/configs/imx8mp_dhcom_pdk2.h index 5443022b04c..d022faaa91a 100644 --- a/include/configs/imx8mp_dhcom_pdk2.h +++ b/include/configs/imx8mp_dhcom_pdk2.h @@ -18,7 +18,7 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x20000000 /* Minimum 512 MiB DDR */ -#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR +#define CFG_MXC_UART_BASE UART1_BASE_ADDR /* PHY needs a longer autonegotiation timeout after reset */ #define PHY_ANEG_TIMEOUT 20000 @@ -28,7 +28,7 @@ #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "altbootcmd=run bootcmd ; reset\0" \ "bootlimit=3\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 738677ff37c..1fea5b72deb 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -12,16 +12,8 @@ #define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ - - -#define CONFIG_POWER_PCA9450 - -#endif - #if defined(CONFIG_CMD_NET) -#define CONFIG_FEC_MXC_PHYADDR 1 +#define CFG_FEC_MXC_PHYADDR 1 #define PHY_ANEG_TIMEOUT 20000 @@ -34,7 +26,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/imx8mp_icore_mx8mp.h b/include/configs/imx8mp_icore_mx8mp.h index d67bad8971d..bbbd91776fe 100644 --- a/include/configs/imx8mp_icore_mx8mp.h +++ b/include/configs/imx8mp_icore_mx8mp.h @@ -13,15 +13,8 @@ #define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ - -#define CONFIG_POWER_PCA9450 - -#endif - #if defined(CONFIG_CMD_NET) -#define CONFIG_FEC_MXC_PHYADDR 1 +#define CFG_FEC_MXC_PHYADDR 1 #define DWC_NET_PHYADDR 1 @@ -36,7 +29,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index 58f7dc6518c..d4ab6a6207d 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -24,22 +24,16 @@ 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9) #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ +#define CFG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ * GD_FLG_FULL_MALLOC_INIT \ * set \ */ - - -#if defined(CONFIG_NAND_BOOT) -#define CONFIG_SPL_NAND_MXS -#endif - #endif /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_FEC_MXC_PHYADDR 4 +#define CFG_FEC_MXC_PHYADDR 4 #define PHY_ANEG_TIMEOUT 20000 @@ -71,7 +65,7 @@ BOOT_TARGET_DHCP(func) /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "script=boot.scr\0" \ "image=Image\0" \ @@ -148,7 +142,7 @@ #define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */ #endif -#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR +#define CFG_MXC_UART_BASE UART3_BASE_ADDR #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 @@ -158,9 +152,6 @@ #define FSL_FSPI_FLASH_NUM 1 #define FSPI0_BASE_ADDR 0x30bb0000 #define FSPI0_AMBA_BASE 0x0 -#define CONFIG_FSPI_QUAD_SUPPORT - -#define CONFIG_SYS_FSL_FSPI_AHB #endif #ifdef CONFIG_NAND_MXS diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h index e79aa570753..4b32d5a77ef 100644 --- a/include/configs/imx8mp_venice.h +++ b/include/configs/imx8mp_venice.h @@ -19,7 +19,7 @@ func(USB, usb, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "splblk=0x40\0" \ BOOTENV diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 4df98e3f373..7cf482d6de1 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -11,10 +11,9 @@ #include <asm/arch/imx-regs.h> #ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #endif @@ -30,7 +29,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "scriptaddr=0x43500000\0" \ "kernel_addr_r=0x40880000\0" \ @@ -54,7 +53,7 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1 GB DDR */ -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) +#define CFG_MXC_UART_BASE UART_BASE_ADDR(1) #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 688c0bf7008..d2e1649400a 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -12,19 +12,18 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 #endif /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 #endif #define BOOT_TARGET_DEVICES(func) \ @@ -35,7 +34,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ @@ -59,7 +58,7 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */ -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) +#define CFG_MXC_UART_BASE UART_BASE_ADDR(1) #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 3b4cd656223..b66fc18fa5e 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -11,26 +11,25 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #endif /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 #endif -#define CONFIG_MFG_ENV_SETTINGS \ +#define CFG_MFG_ENV_SETTINGS \ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffff\0" \ /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_MFG_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ + CFG_MFG_ENV_SETTINGS \ "script=boot.scr\0" \ "image=Image\0" \ "console=ttymxc0,115200\0" \ @@ -92,7 +91,7 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) +#define CFG_MXC_UART_BASE UART_BASE_ADDR(1) #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index f1f907f3e5a..4d5abe2d073 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -11,8 +11,7 @@ #include <asm/arch/imx-regs.h> #ifdef CONFIG_SPL_BUILD -#define CONFIG_SERIAL_LPUART_BASE 0x5a060000 -#define CONFIG_MALLOC_F_ADDR 0x00120000 +#define CFG_MALLOC_F_ADDR 0x00120000 #endif @@ -23,7 +22,7 @@ #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ AHAB_ENV \ "script=boot.scr\0" \ "image=Image\0" \ diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 2e2e5ed43cd..df2cb8d9ced 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -33,7 +33,7 @@ #define MFG_NAND_PARTITION "" #endif -#define CONFIG_MFG_ENV_SETTINGS \ +#define CFG_MFG_ENV_SETTINGS \ "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ "rdinit=/linuxrc " \ "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ @@ -47,8 +47,8 @@ "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_MFG_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ + CFG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \ "script=boot.scr\0" \ "image=Image\0" \ diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index d75b8bf0c18..93999509948 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -11,8 +11,7 @@ #include <asm/arch/imx-regs.h> #ifdef CONFIG_SPL_BUILD -#define CONFIG_SERIAL_LPUART_BASE 0x5a060000 -#define CONFIG_MALLOC_F_ADDR 0x00120000 +#define CFG_MALLOC_F_ADDR 0x00120000 #endif @@ -23,7 +22,7 @@ #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ AHAB_ENV \ "script=boot.scr\0" \ "image=Image\0" \ diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index d313bdc2a44..d77510e1685 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -12,7 +12,7 @@ #define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x22040000 +#define CFG_MALLOC_F_ADDR 0x22040000 #endif @@ -21,7 +21,7 @@ #if defined(CONFIG_FEC_MXC) #define PHY_ANEG_TIMEOUT 20000 -#define CONFIG_FEC_MXC_PHYADDR 1 +#define CFG_FEC_MXC_PHYADDR 1 #endif #ifdef CONFIG_DISTRO_DEFAULTS @@ -34,7 +34,7 @@ #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h index 895c50f6025..7b7bef3ca75 100644 --- a/include/configs/imx93_evk.h +++ b/include/configs/imx93_evk.h @@ -14,7 +14,7 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_MALLOC_F_ADDR 0x204D0000 +#define CFG_MALLOC_F_ADDR 0x204D0000 #endif #ifdef CONFIG_DISTRO_DEFAULTS @@ -28,7 +28,7 @@ #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "scriptaddr=0x83500000\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index 84228676c7f..7688464841e 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -19,7 +19,7 @@ DMAMEM_SZ_ALL) #ifdef CONFIG_VIDEO -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "stdin=serial\0" \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 25bb41ebc46..596e4ff8c3b 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -19,9 +19,6 @@ /* Integrator CP-specific configuration */ #define CFG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ -#define CONFIG_SERVERIP 192.168.1.100 -#define CONFIG_IPADDR 192.168.1.104 - /* * Miscellaneous configurable options */ diff --git a/include/configs/iot2050.h b/include/configs/iot2050.h index 0f6150fc9c7..7d087413362 100644 --- a/include/configs/iot2050.h +++ b/include/configs/iot2050.h @@ -40,7 +40,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ BOOTENV \ EXTRA_ENV_IOT2050_BOARD_SETTINGS diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index e66f994a375..a7210b5cf3a 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -170,7 +170,7 @@ #include <config_distro_bootcmd.h> /* Incorporate settings into the U-Boot environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ DEFAULT_FIT_TI_ARGS \ diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h index ab204c62b7d..54dfea6952e 100644 --- a/include/configs/j721s2_evm.h +++ b/include/configs/j721s2_evm.h @@ -127,7 +127,7 @@ DFU_ALT_INFO_OSPI /* Incorporate settings into the U-Boot environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ DEFAULT_FIT_TI_ARGS \ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index b846889541c..9858f8ff2b5 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -12,17 +12,11 @@ #include "tegra124-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Jetson TK1" +#define CFG_TEGRA_BOARD_STRING "NVIDIA Jetson TK1" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* Environment in eMMC, at the end of 2nd "boot sector" */ - -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index bbc58be511e..929c9a26de1 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -37,8 +37,6 @@ #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* Network */ -#define CONFIG_KSNET_NETCP_V1_5 -#define CONFIG_KSNET_CPSW_NUM_PORTS 9 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE +#define CFG_KSNET_CPSW_NUM_PORTS 9 #endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index bb91751d5d9..d0634a99f49 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -51,9 +51,7 @@ "name_fs=arago-base-tisdk-image-k2g-evm.cpio\0" /* Network */ -#define CONFIG_KSNET_NETCP_V1_5 -#define CONFIG_KSNET_CPSW_NUM_PORTS 2 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE +#define CFG_KSNET_CPSW_NUM_PORTS 2 #define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */ #define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 68cbe98b553..05b4a3c204d 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -37,7 +37,6 @@ #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* Network */ -#define CONFIG_KSNET_NETCP_V1_0 -#define CONFIG_KSNET_CPSW_NUM_PORTS 5 +#define CFG_KSNET_CPSW_NUM_PORTS 5 #endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index a18158a7eb3..b1b839b5043 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -37,8 +37,6 @@ #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* Network */ -#define CONFIG_KSNET_NETCP_V1_5 -#define CONFIG_KSNET_CPSW_NUM_PORTS 5 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE +#define CFG_KSNET_CPSW_NUM_PORTS 5 #endif /* __CONFIG_K2L_EVM_H */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h deleted file mode 100644 index cc5ec219b8d..00000000000 --- a/include/configs/km/keymile-common.h +++ /dev/null @@ -1,174 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2008-2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - */ - -#ifndef __CONFIG_KEYMILE_H -#define __CONFIG_KEYMILE_H - -#include <linux/stringify.h> - -/* - * Miscellaneous configurable options - */ - -#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS -#define CONFIG_KM_DEF_ENV_BOOTPARAMS \ - "actual_bank=0\0" -#endif - -#ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */ - -#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS -#define CONFIG_KM_UBI_PART_BOOT_OPTS "" -#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */ - -#ifndef CONFIG_KM_UBI_PARTITION_NAME_APP -/* one flash chip only called boot */ -/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ -# define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ - CONFIG_KM_UBI_PART_BOOT_OPTS -# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ - "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0" -#else /* CONFIG_KM_UBI_PARTITION_NAME_APP */ -/* two flash chips called boot and app */ -/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ -/* app: CONFIG_KM_UBI_PARTITION_NAME_APP */ -# define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ - CONFIG_KM_UBI_PART_BOOT_OPTS " " \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP -# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ - "ubiattach=if test ${boot_bank} -eq 0; then; " \ - "ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; " \ - "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0" -#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */ - -#ifdef CONFIG_NAND_ECC_BCH -#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0" -#define CONFIG_KM_ECC_MODE " eccmode=bch" -#else -#define CONFIG_KM_UIMAGE_NAME "uImage\0" -#define CONFIG_KM_ECC_MODE -#endif - -/* - * boottargets - * - set 'subbootcmds' - * - set 'bootcmd' and 'altbootcmd' - * available targets: - * - 'release': for a standalone system kernel/rootfs from flash - */ -#define CONFIG_KM_DEF_ENV_BOOTTARGETS \ - "subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt " \ - "set_fdthigh cramfsloadkernel flashargs add_default " \ - "addpanic boot\0" \ - "develop=" \ - "tftp ${load_addr_r} scripts/develop-${arch}.txt && " \ - "env import -t ${load_addr_r} ${filesize} && " \ - "run setup_debug_env\0" \ - "ramfs=" \ - "tftp ${load_addr_r} scripts/ramfs-${arch}.txt && " \ - "env import -t ${load_addr_r} ${filesize} && " \ - "run setup_debug_env\0" \ - "" - -/* - * bootargs - * - modify 'bootargs' - * - * - 'add_default': default bootargs common for all arm/ppc boards - * - 'addpanic': add kernel panic options - * - 'flashargs': defaults arguments for flash base boot - * - */ -#define CONFIG_KM_DEF_ENV_BOOTARGS \ - "add_default=" \ - "setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off:" \ - " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \ - " mem=${kernelmem} init=${init}" \ - CONFIG_KM_ECC_MODE \ - " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\ - " " CONFIG_KM_UBI_LINUX_MTD " " \ - CONFIG_KM_DEF_BOOT_ARGS_CPU \ - "\0" \ - "addpanic=" \ - "setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0" \ - "flashargs=" \ - "setenv bootargs " \ - "root=mtdblock:rootfs${boot_bank} " \ - "rootfstype=squashfs ro\0" \ - "" - -/* - * flash_boot - * - commands for booting from flash - * - * - 'cramfsloadkernel': copy kernel from a cramfs to ram - * - 'ubiattach': attach ubi partition - * - 'ubicopy': copy ubi volume to ram - * - volume names: bootfs0, bootfs1, bootfs2, ... - * - * processor specific settings - * - 'cramfsloadfdt': copy fdt from a cramfs to ram - */ -#define CONFIG_KM_DEF_ENV_FLASH_BOOT \ - "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \ - "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0" \ - "ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}\0" \ - "uimage=" CONFIG_KM_UIMAGE_NAME \ - CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI - -/* - * constants - * - KM specific constants and commands - * - * - 'default': setup default environment - */ -#define CONFIG_KM_DEF_ENV_CONSTANTS \ - "backup_bank=0\0" \ - "release=run newenv; reset\0" \ - "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0" \ - "testbootcmd=setenv boot_bank ${test_bank}; " \ - "run ${subbootcmds}; reset\0" \ - "env_version=1\0" \ - "" - -#ifndef CONFIG_KM_DEF_ENV -#define CONFIG_KM_DEF_ENV \ - CONFIG_KM_DEF_ENV_BOOTPARAMS \ - "netdev=" __stringify(CONFIG_KM_DEF_NETDEV) "\0" \ - CONFIG_KM_DEF_ENV_CPU \ - CONFIG_KM_DEF_ENV_BOOTTARGETS \ - CONFIG_KM_DEF_ENV_BOOTARGS \ - CONFIG_KM_DEF_ENV_FLASH_BOOT \ - CONFIG_KM_DEF_ENV_CONSTANTS \ - "altbootcmd=run bootcmd\0" \ - "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ - "bootcmd=km_checkbidhwk && " \ - "setenv bootcmd \'if km_checktestboot; then; " \ - "setenv boot_bank ${test_bank}; else; " \ - "setenv boot_bank ${actual_bank}; fi;" \ - "run ${subbootcmds}; reset\' && " \ - "setenv altbootcmd \'setenv boot_bank ${backup_bank}; " \ - "run ${subbootcmds}; reset\' && " \ - "saveenv && saveenv && boot\0" \ - "cramfsloadfdt=" \ - "cramfsload ${fdt_addr_r} " \ - "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ - "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ - "init=/sbin/init-overlay.sh\0" \ - "load_addr_r=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0" \ - "load=tftpboot ${load_addr_r} ${u-boot}\0" \ - "" -#endif /* CONFIG_KM_DEF_ENV */ - -#endif /* __CONFIG_KEYMILE_H */ diff --git a/include/configs/km/km-mpc8360.h b/include/configs/km/km-mpc8360.h index 5c9f912383d..04d3d352ee2 100644 --- a/include/configs/km/km-mpc8360.h +++ b/include/configs/km/km-mpc8360.h @@ -66,9 +66,3 @@ #define CFG_SYS_DDR_TIMING_3 0x00000000 -/* EEprom support */ - -/* - * PAXE on the local bus CS3 - */ -#define CFG_SYS_PAXE_BASE 0xA0000000 diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h index 840a4d5401f..c939caf2a1f 100644 --- a/include/configs/km/km-mpc83xx.h +++ b/include/configs/km/km-mpc83xx.h @@ -48,14 +48,6 @@ #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } -/* I2C */ -#define CFG_SYS_NUM_I2C_BUSES 4 -#define CFG_SYS_I2C_MAX_HOPS 1 -#define CFG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ - {1, {I2C_NULL_HOP} } } - #if defined(CONFIG_CMD_NAND) #define CFG_SYS_NAND_BASE CFG_SYS_KMBEC_FPGA_BASE #endif @@ -66,32 +58,3 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CFG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Environment - */ - -/* - * Environment Configuration - */ -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV "km-common=empty\0" -#endif - -#ifndef CONFIG_KM_DEF_ARCH -#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_DEF_ENV \ - CONFIG_KM_DEF_ARCH \ - "newenv=" \ - "prot off " __stringify(CONFIG_ENV_ADDR) " +0x40000 && " \ - "era " __stringify(CONFIG_ENV_ADDR) " +0x40000\0" \ - "unlock=yes\0" \ - "" - -/* - * QE UEC ethernet configuration - */ -#define CONFIG_UEC_ETH diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h deleted file mode 100644 index 424caa0df97..00000000000 --- a/include/configs/km/km-powerpc.h +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - */ - -#ifndef __CONFIG_KEYMILE_POWERPC_H -#define __CONFIG_KEYMILE_POWERPC_H - -/* Do boardspecific init for all boards */ - -/* Increase max size of compressed kernel */ - -/****************************************************************************** - * (PRAM usage) - * ... ------------------------------------------------------- - * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM - * ... |<------------------- pram -------------------------->| - * ... ------------------------------------------------------- - * @END_OF_RAM: - * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose - * @CONFIG_KM_PHRAM: address for /var - * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application) - */ - -/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable - * is not valid yet, which is the case for when u-boot copies itself to RAM */ -#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10) - -/* architecture specific default bootargs */ -#define CONFIG_KM_DEF_BOOT_ARGS_CPU "" - -#define CONFIG_KM_DEF_ENV_CPU \ - "u-boot="CONFIG_HOSTNAME "/u-boot.bin\0" \ - "update=" \ - "protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\ - "erase " __stringify(BOOTFLASH_START) " +${filesize} && "\ - "cp.b ${load_addr_r} " __stringify(BOOTFLASH_START) \ - " ${filesize} && " \ - "protect on " __stringify(BOOTFLASH_START) " +${filesize}\0"\ - "set_fdthigh=true\0" \ - "checkfdt=true\0" \ - "bootm_mapsize=" __stringify(CONFIG_SYS_BOOTM_LEN) "\0" \ - "" - -#endif /* __CONFIG_KEYMILE_POWERPC_H */ diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index dfa81c037f4..15ef68a0507 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -6,13 +6,10 @@ #ifndef __CONFIG_PG_WCOM_LS102XA_H #define __CONFIG_PG_WCOM_LS102XA_H -/* include common defines/options for all Keymile boards */ -#include "keymile-common.h" - #define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + \ +#define CFG_PRAM ((CONFIG_KM_PNVRAM + \ CONFIG_KM_PHRAM + \ CONFIG_KM_RESERVED_PRAM) >> 10) @@ -61,8 +58,6 @@ FTIM2_NOR_TWP(0xb)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS } #define CFG_SYS_WRITE_SWAPPED_DATA @@ -154,7 +149,6 @@ * I2C */ -#define CONFIG_I2C_MULTI_BUS #define CFG_SYS_I2C_MAX_HOPS 1 #define CFG_SYS_NUM_I2C_BUSES 3 #define I2C_MUX_PCA_ADDR 0x70 @@ -164,72 +158,10 @@ {1, {I2C_NULL_HOP} }, \ } -#define CONFIG_SMP_PEN_ADDR 0x01ee0200 +#define CFG_SMP_PEN_ADDR 0x01ee0200 #define HWCONFIG_BUFFER_SIZE 256 -/* - * Environment - */ - -#define CONFIG_ENV_TOTAL_SIZE 0x40000 -#define ENV_DEL_ADDR CONFIG_ENV_ADDR_REDUND /* direct for newenv */ - -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV -#endif - -#ifndef CONFIG_KM_DEF_BOOT_ARGS_CPU -#define CONFIG_KM_DEF_BOOT_ARGS_CPU "" -#endif - -#define CONFIG_KM_DEF_ENV_CPU \ - "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ - "cramfsloadfdt=" \ - "cramfsload ${fdt_addr_r} " \ - "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ - "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize} && " \ - "erase " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize} && " \ - "cp.b ${load_addr_r} " \ - __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \ - "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize}\0" \ - "update-nor=protect off " __stringify(CFG_SYS_FLASH_BASE) \ - " +${filesize} && " \ - "erase " __stringify(CFG_SYS_FLASH_BASE) \ - " +${filesize} && " \ - "cp.b ${load_addr_r} " \ - __stringify(CFG_SYS_FLASH_BASE) " ${filesize} && " \ - "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +" __stringify(CONFIG_SYS_MONITOR_LEN)"\0" \ - "set_fdthigh=true\0" \ - "checkfdt=true\0" \ - "" - -#define CONFIG_KM_NEW_ENV \ - "newenv=protect off " __stringify(ENV_DEL_ADDR) \ - " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ - "erase " __stringify(ENV_DEL_ADDR) \ - " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ - "protect on " __stringify(ENV_DEL_ADDR) \ - " +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0" - -#define CONFIG_HW_ENV_SETTINGS \ - "hwconfig=devdis:esdhc,usb3,usb2,sata,sec,dcu,duart2,qspi," \ - "can1,can2_4,ftm2_8,i2c2_3,sai1_4,lpuart2_6," \ - "asrc,spdif,lpuart1,ftm1\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_NEW_ENV \ - CONFIG_KM_DEF_ENV \ - CONFIG_HW_ENV_SETTINGS \ - "EEprom_ivm=pca9547:70:9\0" \ - "ethrotate=no\0" \ - "" - #define CFG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */ #endif diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 527f0383bc6..e7ae18ec5f9 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -8,18 +8,6 @@ #ifndef __KMCENT2_H #define __KMCENT2_H -#define CONFIG_HOSTNAME "kmcent2" -#define KM_BOARD_NAME CONFIG_HOSTNAME - -/* - * The Linux fsl_fman driver needs to be able to process frames with more - * than just the VLAN tag (i.e. eDSA tag). It is passed as a kernel boot - * parameters - */ -#define CONFIG_KM_DEF_BOOT_ARGS_CPU "fsl_dpaa_fman.fsl_fm_max_frm=1558" - -#include "km/keymile-common.h" - /* Application IFC chip selects */ #define SYS_LAWAPP_BASE 0xc0000000 #define SYS_LAWAPP_BASE_PHYS (0xf00000000ull | SYS_LAWAPP_BASE) @@ -134,12 +122,12 @@ /* High Level Configuration Options */ -#define CONFIG_RESET_VECTOR_ADDRESS 0xebfffffc +#define CFG_RESET_VECTOR_ADDRESS 0xebfffffc #define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS /* Environment in parallel NOR-Flash */ -#define CONFIG_ENV_TOTAL_SIZE 0x040000 +#define CFG_ENV_TOTAL_SIZE 0x040000 #define ENV_DEL_ADDR 0xebf00000 /*direct for newenv*/ /* @@ -161,7 +149,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -183,7 +170,7 @@ /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable * is not valid yet, which is the case for when u-boot copies itself to RAM */ -#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10) +#define CFG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10) /* * IFC Definitions @@ -327,7 +314,7 @@ * shorted - index 1 * Retain non-DM serial port for debug purposes. */ -#if !defined(CONFIG_DM_SERIAL) +#if !CONFIG_IS_ENABLED(DM_SERIAL) #define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) #define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR + 0x11C500) #endif @@ -377,8 +364,8 @@ int get_scl(void); /* * Hardware Watchdog */ -#define CONFIG_WATCHDOG_PRESC 34 /* wdog prescaler 2^(64-34) ~10min */ -#define CONFIG_WATCHDOG_RC WRC_CHIP /* reset chip on watchdog event */ +#define CFG_WATCHDOG_PRESC 34 /* wdog prescaler 2^(64-34) ~10min */ +#define CFG_WATCHDOG_RC WRC_CHIP /* reset chip on watchdog event */ /* * For booting Linux, the board info and command line data @@ -387,66 +374,4 @@ int get_scl(void); */ #define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ -/* - * Environment Configuration - */ -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV -#endif - -#define __USB_PHY_TYPE utmi - -#define CONFIG_KM_DEF_ENV_CPU \ - "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ - "cramfsloadfdt=" \ - "cramfsload ${fdt_addr_r} " \ - "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ - "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize} && " \ - "erase " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize} && " \ - "cp.b ${load_addr_r} " \ - __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \ - "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize}\0" \ - "update-nor=protect off " __stringify(CFG_SYS_FLASH_BASE) \ - " +${filesize} && " \ - "erase " __stringify(CFG_SYS_FLASH_BASE) \ - " +${filesize} && " \ - "cp.b ${load_addr_r} " \ - __stringify(CFG_SYS_FLASH_BASE) " ${filesize} && " \ - "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +" __stringify(CONFIG_SYS_MONITOR_LEN) "\0" \ - "set_fdthigh=true\0" \ - "checkfdt=true\0" \ - "fpgacfg=true\0" \ - "" - -#define CONFIG_HW_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0" \ - "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ - "usb_dr_mode=host\0" - -#define CONFIG_KM_NEW_ENV \ - "newenv=protect off " __stringify(ENV_DEL_ADDR) \ - " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ - "erase " __stringify(ENV_DEL_ADDR) \ - " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ - "protect on " __stringify(ENV_DEL_ADDR) \ - " +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0" - -/* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */ -#ifndef CONFIG_KM_DEF_ARCH -#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_DEF_ENV \ - CONFIG_KM_DEF_ARCH \ - CONFIG_KM_NEW_ENV \ - CONFIG_HW_ENV_SETTINGS \ - "EEprom_ivm=pca9547:70:9\0" \ - "" - #endif /* __KMCENT2_H */ diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index 6b30fb4b617..d52f45ba911 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -8,16 +8,10 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_HOSTNAME "kmcoge5ne" #define NAND_MAX_CHIPS 1 #define CFG_SYS_NAND_BASE CFG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" - /* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" #include "km/km-mpc83xx.h" #include "km/km-mpc8360.h" @@ -36,7 +30,7 @@ #define CFG_POST (CFG_SYS_POST_MEMORY|CFG_SYS_POST_MEM_REGIONS) #define CFG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */ #define CPM_POST_WORD_ADDR CONFIG_SYS_MEMTEST_END -#define CONFIG_TESTPIN_REG gprt3 /* for kmcoge5ne */ -#define CONFIG_TESTPIN_MASK 0x20 /* for kmcoge5ne */ +#define CFG_TESTPIN_REG gprt3 /* for kmcoge5ne */ +#define CFG_TESTPIN_MASK 0x20 /* for kmcoge5ne */ #endif /* CONFIG */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 910fc1b2cb2..6f67e5a98ab 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -8,11 +8,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_HOSTNAME "kmeter1" - /* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" #include "km/km-mpc83xx.h" #include "km/km-mpc8360.h" diff --git a/include/configs/kmopti2.h b/include/configs/kmopti2.h index 5050c703039..d6a3844bcc5 100644 --- a/include/configs/kmopti2.h +++ b/include/configs/kmopti2.h @@ -20,14 +20,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * High Level Configuration Options - */ -#define CONFIG_HOSTNAME "kmopti2" - /* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" #include "km/km-mpc83xx.h" #include "km/km-mpc832x.h" diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h index e3de6c61e71..d6a3844bcc5 100644 --- a/include/configs/kmsupx5.h +++ b/include/configs/kmsupx5.h @@ -20,14 +20,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * High Level Configuration Options - */ -#define CONFIG_HOSTNAME "kmsupx5" - /* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" #include "km/km-mpc83xx.h" #include "km/km-mpc832x.h" diff --git a/include/configs/kmtepr2.h b/include/configs/kmtepr2.h index a4ceb1c50d6..d6a3844bcc5 100644 --- a/include/configs/kmtepr2.h +++ b/include/configs/kmtepr2.h @@ -20,14 +20,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * High Level Configuration Options - */ -#define CONFIG_HOSTNAME "kmtepr2" - /* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" #include "km/km-mpc83xx.h" #include "km/km-mpc832x.h" diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 736865ad80a..d47d70178cc 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -20,16 +20,16 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SH Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0x1 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x1 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" /* SPL support */ diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h index 6fcacdb0c66..1c92cd78767 100644 --- a/include/configs/kontron-sl-mx6ul.h +++ b/include/configs/kontron-sl-mx6ul.h @@ -22,12 +22,11 @@ #define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* Board and environment settings */ -#define CONFIG_MXC_UART_BASE UART4_BASE -#define CONFIG_HOSTNAME "kontron-mx6ul" +#define CFG_MXC_UART_BASE UART4_BASE #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif /* Boot order for distro boot */ @@ -46,6 +45,6 @@ #define CFG_SYS_FSL_USDHC_NUM 2 #endif -#define CONFIG_EXTRA_ENV_SETTINGS BOOTENV +#define CFG_EXTRA_ENV_SETTINGS BOOTENV #endif /* __KONTRON_MX6UL_CONFIG_H */ diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h index 80a32304606..eee3d2ddb03 100644 --- a/include/configs/kontron-sl-mx8mm.h +++ b/include/configs/kontron-sl-mx8mm.h @@ -23,11 +23,10 @@ #define CFG_SYS_INIT_RAM_SIZE 0x200000 /* Board and environment settings */ -#define CONFIG_HOSTNAME "kontron-mx8mm" #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif /* GUID for capsule updatable firmware image */ @@ -47,9 +46,9 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 #endif -#define CONFIG_EXTRA_ENV_SETTINGS BOOTENV +#define CFG_EXTRA_ENV_SETTINGS BOOTENV #endif /* __KONTRON_MX8MM_CONFIG_H */ diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 17c63d83410..5cf6b5a6dd4 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -13,19 +13,18 @@ 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 #endif /* ENET1 Config */ #if defined(CONFIG_CMD_NET) -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 #define PHY_ANEG_TIMEOUT 20000 @@ -50,7 +49,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=Image\0" \ "console=ttymxc2,115200\0" \ "boot_fdt=try\0" \ @@ -67,7 +66,7 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */ -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3) +#define CFG_MXC_UART_BASE UART_BASE_ADDR(3) #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 9c3174d0e02..940bfd2b336 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -15,10 +15,6 @@ #undef CFG_SYS_MEM_RESERVE_SECURE #endif -/* DDR */ -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -32,7 +28,7 @@ /* generic timer */ /* early heap for SPL DM */ -#define CONFIG_MALLOC_F_ADDR CFG_SYS_FSL_OCRAM_BASE +#define CFG_MALLOC_F_ADDR CFG_SYS_FSL_OCRAM_BASE /* serial port */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) @@ -65,7 +61,7 @@ func(PXE, pxe, 0) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "env_addr=0x203e0004\0" \ "envload=env import -d -b ${env_addr}\0" \ "install_rcw=source 20200000\0" \ diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index c551585a206..6e383cbe75f 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -11,12 +11,12 @@ #include <linux/sizes.h> /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Command definition */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc1,115200\0" \ "fdt_addr=0x75000000\0" \ "fdt_high=0xffffffff\0" \ diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index 136e228682a..1aa4b8ab598 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -18,11 +18,11 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200\0" \ "fdt_addr=0x18000000\0" \ "fdt_high=0xffffffff\0" \ diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 828f9109634..7ad29f92997 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -15,13 +15,6 @@ */ /* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#endif - -/* * Enable GPI0 support */ @@ -51,7 +44,7 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" \ diff --git a/include/configs/lager.h b/include/configs/lager.h index f3feaa539fc..2577c7a7da6 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -21,16 +21,16 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SH Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0x1 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x1 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" /* SPL support */ diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index abe470fe890..ff966586ba6 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -27,7 +27,7 @@ */ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ +#define CFG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ /* memtest start addr */ @@ -48,8 +48,7 @@ * Linux Information */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_SETUP_INITRD_TAG -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootenvfile=uEnv.txt\0" \ "fdtfile=da850-lego-ev3.dtb\0" \ "memsize=64M\0" \ diff --git a/include/configs/librem5.h b/include/configs/librem5.h index 11b3fa6c857..ce0a340ba26 100644 --- a/include/configs/librem5.h +++ b/include/configs/librem5.h @@ -15,40 +15,28 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#ifdef CONFIG_SPL_BUILD - -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */ - -#define CONFIG_POWER_BD71837 -#define CONFIG_POWER_BD71837_I2C_BUS 0 -#define CONFIG_POWER_BD71837_I2C_ADDR 0x4B - -#endif /* CONFIG_SPL_BUILD*/ - #define CFG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_USBD_HS - #define CONSOLE_ON_UART1 #ifdef CONSOLE_ON_UART1 -#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR +#define CFG_MXC_UART_BASE UART1_BASE_ADDR #define CONSOLE_UART_CLK 0 #define CONSOLE "ttymxc0" #elif defined(CONSOLE_ON_UART2) -#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR +#define CFG_MXC_UART_BASE UART2_BASE_ADDR #define CONSOLE_UART_CLK 1 #define CONSOLE "ttymxc1" #elif defined(CONSOLE_ON_UART3) -#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR +#define CFG_MXC_UART_BASE UART3_BASE_ADDR #define CONSOLE_UART_CLK 2 #define CONSOLE "ttymxc2" #elif defined(CONSOLE_ON_UART4) -#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR +#define CFG_MXC_UART_BASE UART4_BASE_ADDR #define CONSOLE_UART_CLK 3 #define CONSOLE "ttymxc3" #else -#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR +#define CFG_MXC_UART_BASE UART1_BASE_ADDR #define CONSOLE_UART_CLK 0 #define CONSOLE "ttymxc0" #endif @@ -64,7 +52,7 @@ #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "scriptaddr=0x80000000\0" \ "pxefile_addr_r=0x80100000\0" \ "kernel_addr_r=0x80800000\0" \ diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index 721da818633..5811059c8e2 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -13,14 +13,14 @@ #include <linux/stringify.h> #include "mx6_common.h" -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #ifdef CONFIG_FSL_USDHC #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc0\0" \ @@ -95,14 +95,14 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif #ifdef CONFIG_CMD_NET -#define CONFIG_FEC_ENET_DEV 0 +#define CFG_FEC_ENET_DEV 0 -#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CFG_FEC_MXC_PHYADDR 0x0 #endif #endif diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index f0a9e9ab315..d1e0ed5817e 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -11,8 +11,8 @@ /* DDR */ #define CFG_SYS_SDRAM_SIZE 0x40000000 -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_addr=0x01000000\0" \ diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 9e4f949016e..a5f680db2d3 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -34,7 +34,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index c19ed2f43ec..4243a21f1f1 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -16,8 +16,8 @@ #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ "fdt_high=0xffffffffffffffff\0" \ "kernel_addr=0x01000000\0" \ diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 1b417c72e70..872296749c0 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -25,8 +25,8 @@ func(USB, usb, 0) \ func(DHCP, dhcp, na) -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_addr=0x01000000\0" \ diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 495bb3911b3..35e8ff05798 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -55,8 +55,8 @@ #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ "kernel_addr=0x01000000\0" \ "kernelheader_addr=0x600000\0" \ diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index d74936d1281..1e843f896c7 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -36,8 +36,8 @@ #define __PHY_ETH2_MASK 0xFB #define __PHY_ETH1_MASK 0xFD -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_addr=0x01000000\0" \ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 024a7185275..83ab94ec444 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -61,40 +61,18 @@ #ifndef PCI_DEVICE_ID_FREESCALE_AHCI #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 #endif -#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ +#define CFG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ PCI_DEVICE_ID_FREESCALE_AHCI} /* SPI */ -/* - * eTSEC - */ - -#ifdef CONFIG_TSEC_ENET -#define CONFIG_MII_DEFAULT_TSEC 1 -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" - -#define TSEC1_PHY_ADDR 1 -#define TSEC2_PHY_ADDR 3 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#endif - #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" -#define CONFIG_PEN_ADDR_BIG_ENDIAN -#define CONFIG_SMP_PEN_ADDR 0x01ee0200 +#define CFG_SMP_PEN_ADDR 0x01ee0200 #define HWCONFIG_BUFFER_SIZE 256 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "initrd_high=0xffffffff\0" diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 5a91cc3efec..e4e5522a238 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -22,10 +22,6 @@ #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - /* * IFC Definitions */ @@ -60,7 +56,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_WRITE_SWAPPED_DATA #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS, \ @@ -247,44 +242,17 @@ * MMC */ -/* - * eTSEC - */ - -#ifdef CONFIG_TSEC_ENET -#define CONFIG_MII_DEFAULT_TSEC 3 -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 1 -#define TSEC2_PHY_ADDR 2 -#define TSEC3_PHY_ADDR 3 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#endif - -#define CONFIG_PEN_ADDR_BIG_ENDIAN -#define CONFIG_SMP_PEN_ADDR 0x01ee0200 +#define CFG_SMP_PEN_ADDR 0x01ee0200 #define HWCONFIG_BUFFER_SIZE 256 #ifdef CONFIG_LPUART -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ "initrd_high=0xffffffff\0" \ "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0" #else -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "initrd_high=0xffffffff\0" \ "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0" diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 5612c60ae90..b722586dd6b 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -38,21 +38,6 @@ #define SDRAM_CFG2_FRC_SR 0x80000000 #define SDRAM_CFG_BI 0x00000001 -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw U-Boot image instead of FIT image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ -#endif - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) @@ -75,7 +60,7 @@ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "initrd_high=0xffffffff\0" \ "kernel_addr=0x61000000\0" \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 3c4c207edd0..eb8fb042723 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -37,25 +37,6 @@ #define SDRAM_CFG2_FRC_SR 0x80000000 #define SDRAM_CFG_BI 0x00000001 -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. - */ -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ -#endif - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) @@ -92,8 +73,6 @@ FTIM2_NOR_TWPH(0x0e)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS } #define CFG_SYS_WRITE_SWAPPED_DATA @@ -154,8 +133,7 @@ /* GPIO */ -#define CONFIG_PEN_ADDR_BIG_ENDIAN -#define CONFIG_SMP_PEN_ADDR 0x01ee0200 +#define CFG_SMP_PEN_ADDR 0x01ee0200 #define HWCONFIG_BUFFER_SIZE 256 @@ -166,7 +144,7 @@ #include <config_distro_bootcmd.h> #ifdef CONFIG_LPUART -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 " \ "cma=64M@0x0-0xb0000000\0" \ "initrd_high=0xffffffff\0" \ @@ -222,7 +200,7 @@ "cp.b $kernel_addr $load_addr " \ "$kernel_size && bootm $load_addr#$board\0" #else -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200 " \ "cma=64M@0x0-0xb0000000\0" \ "initrd_high=0xffffffff\0" \ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index b190bfe9c8e..2ccb20192d4 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -12,7 +12,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 228fb122f5f..769ece901c1 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -61,8 +61,8 @@ /* SATA */ #ifndef SPL_NO_ENV -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "board=ls1028aqds\0" \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 5c134612576..ee4f885c534 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -52,12 +52,12 @@ /* SATA */ #define SCSI_VEND_ID 0x1b4b #define SCSI_DEV_ID 0x9170 -#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#define CFG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} /* Initial environment variables */ #ifndef SPL_NO_ENV -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "board=ls1028ardb\0" \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index a3fa92d1ff4..ac2319c1b42 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -31,7 +31,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -42,37 +41,10 @@ /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_serial_clock()) -/* SD boot SPL */ -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ -#endif - /* NAND SPL */ #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE #define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE - -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ - #endif /* GPIO */ @@ -90,10 +62,6 @@ #define CFG_SYS_FLASH_BASE 0x60000000 #define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 - -#ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#endif #endif #endif @@ -120,7 +88,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index dab57382edd..7ccbb20bf2e 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -12,10 +12,6 @@ #define SPD_EEPROM_ADDRESS 0x51 -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - #ifdef CONFIG_SYS_DPAA_FMAN #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 @@ -107,7 +103,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #endif #ifdef CONFIG_NAND_BOOT diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 12c4853ea96..60362b6a4d0 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -9,12 +9,6 @@ #include "ls1043a_common.h" -/* Physical Memory Map */ - -#ifndef CONFIG_SPL -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - /* * NOR Flash Definitions */ @@ -82,7 +76,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_SIZE (1024 << 10) @@ -210,7 +203,7 @@ #ifndef SPL_NO_SATA #define SCSI_VEND_ID 0x1b4b #define SCSI_DEV_ID 0x9170 -#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#define CFG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 4ed5481c3e7..38fb1d45bcb 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -31,7 +31,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -42,19 +41,6 @@ /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_serial_clock()) -/* SD boot SPL */ -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ -#endif - /* NAND SPL */ #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE @@ -98,7 +84,7 @@ #endif #ifndef SPL_NO_MISC /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index 1759d25f3a3..5e03a962d10 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -45,7 +45,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE /* IFC Timing Params */ #define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 553ae841cab..4b4bd7cbe48 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -12,10 +12,6 @@ #define SPD_EEPROM_ADDRESS 0x51 -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - #ifdef CONFIG_SYS_DPAA_FMAN #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 @@ -41,10 +37,6 @@ #define CFG_SYS_FLASH_BASE 0x60000000 #define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 - -#ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#endif #endif /* LPUART */ @@ -127,7 +119,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #endif #ifdef CONFIG_NAND_BOOT diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index f3904e7b3f7..0e42a51fc59 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -13,8 +13,6 @@ #define SPD_EEPROM_ADDRESS 0x51 -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - #if defined(CONFIG_QSPI_BOOT) #define CFG_SYS_UBOOT_BASE 0x40100000 #endif @@ -50,7 +48,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE /* * CPLD diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 57429d4bbe3..720a95d2f53 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -29,7 +29,6 @@ /* Link Definitions */ #define CFG_SYS_FSL_QSPI_BASE 0x20000000 -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -118,7 +117,7 @@ unsigned long long get_qixis_addr(void); #ifndef SPL_NO_ENV /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ @@ -134,17 +133,4 @@ unsigned long long get_qixis_addr(void); " 0x580e00000 \0" #endif -#ifdef CONFIG_SPL -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ - -#endif - #endif /* __LS1088_COMMON_H */ diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index a35045d640f..084ee064ae6 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -14,7 +14,6 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS 0x51 @@ -62,8 +61,6 @@ #define CFG_SYS_IFC_CCR 0x01000000 #ifndef SYS_NO_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ CFG_SYS_FLASH_BASE + 0x40000000} #endif @@ -99,7 +96,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 6 @@ -297,8 +293,8 @@ /* Initial environment variables */ #ifdef CONFIG_NXP_ESBC -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ COMMON_ENV \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x90100000\0" \ @@ -329,8 +325,8 @@ #define IFC_MC_INIT_CMD \ "fsl_mc start mc 0x580A00000 0x580E00000\0" -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ COMMON_ENV \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x90100000\0" \ @@ -391,8 +387,8 @@ "$kernel_size && bootm $kernel_load#$BOARD\0" #else #if defined(CONFIG_QSPI_BOOT) -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ COMMON_ENV \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x90100000\0" \ @@ -409,8 +405,8 @@ "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #elif defined(CONFIG_SD_BOOT) -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ COMMON_ENV \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x90100000\0" \ @@ -427,8 +423,8 @@ "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #else /* NOR BOOT */ -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ COMMON_ENV \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x90100000\0" \ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 7bc4fc6a665..a1749149e50 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -15,7 +15,6 @@ #define COUNTER_FREQUENCY_REAL 25000000 /* 25MHz */ -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS 0x51 @@ -47,8 +46,6 @@ #define CFG_SYS_IFC_CCR 0x01000000 #ifndef SYS_NO_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif #endif @@ -83,7 +80,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_BRDCFG4_OFFSET 0x54 @@ -238,9 +234,9 @@ #endif #endif /* CONFIG_TFABOOT */ -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS #ifdef CONFIG_TFABOOT -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "BOARD=ls1088ardb\0" \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ @@ -308,7 +304,7 @@ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$BOARD\0" #else -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "BOARD=ls1088ardb\0" \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index e82456fd814..f51eb31ed06 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -16,7 +16,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -110,7 +109,7 @@ unsigned long long get_qixis_addr(void); #define HWCONFIG_BUFFER_SIZE 128 /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 924d4057d93..7ad2432a775 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -16,7 +16,6 @@ #define CFG_SYS_I2C_FPGA_ADDR 0x66 #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 #define SPD_EEPROM_ADDRESS3 0x53 @@ -64,8 +63,6 @@ #define CFG_SYS_IFC_CCR 0x01000000 #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ CFG_SYS_FLASH_BASE + 0x40000000} #endif @@ -100,7 +97,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f @@ -230,9 +226,9 @@ #define CFG_SYS_I2C_RTC_ADDR 0x68 /* Initial environment variables */ -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS #ifdef CONFIG_NXP_ESBC -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ @@ -257,7 +253,7 @@ #define IFC_MC_INIT_CMD \ "fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "loadaddr_sd=0x90100000\0" \ @@ -313,7 +309,7 @@ "$kernel_addr_sd $kernel_size_sd && " \ "bootm $load_addr#$BOARD\0" #elif defined(CONFIG_SD_BOOT) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x90100000\0" \ "kernel_addr=0x800\0" \ @@ -329,7 +325,7 @@ "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #else -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "kernel_addr=0x100000\0" \ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index c50b6030680..794ea84852e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -21,7 +21,6 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 #define SPD_EEPROM_ADDRESS3 0x53 @@ -61,8 +60,6 @@ #define CFG_SYS_IFC_CCR 0x01000000 #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ CFG_SYS_FLASH_BASE + 0x40000000} #endif @@ -97,7 +94,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f @@ -279,9 +275,9 @@ #endif /* Initial environment variables */ -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS #ifdef CONFIG_TFABOOT -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ @@ -343,7 +339,7 @@ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ "bootm $load_addr#$board\0" #else -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index c82eb8b04bf..47d7ec57b80 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -22,7 +22,7 @@ /* * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootsource=legacy\0" \ "hdpart=0:1\0" \ "kernel_addr_r=0x00800000\0" \ diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index a469c83fa4e..6f46ca78d4d 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -13,13 +13,11 @@ #define CFG_SYS_FLASH_BASE 0x20000000 /* DDR */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL #define CFG_SYS_SDRAM_SIZE 0x200000000UL #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 #define SPD_EEPROM_ADDRESS3 0x53 @@ -41,13 +39,13 @@ /* Serial Port */ -#define CONFIG_PL011_CLOCK (get_bus_freq(0) / 4) +#define CFG_PL011_CLOCK (get_bus_freq(0) / 4) #define CFG_SYS_SERIAL0 0x21c0000 #define CFG_SYS_SERIAL1 0x21d0000 #define CFG_SYS_SERIAL2 0x21e0000 #define CFG_SYS_SERIAL3 0x21f0000 /*below might needs to be removed*/ -#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ +#define CFG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ (void *)CFG_SYS_SERIAL1, \ (void *)CFG_SYS_SERIAL2, \ (void *)CFG_SYS_SERIAL3 } diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index 9f891064bd5..3a316e73308 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -14,7 +14,7 @@ /* MAC/PHY configuration */ /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ EXTRA_ENV_SETTINGS \ "boot_scripts=lx2160aqds_boot.scr\0" \ "boot_script_hdr=hdr_lx2160aqds_bs.out\0" \ diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index 58c0ff36571..8cc4e0db03f 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -18,7 +18,7 @@ #define I2C_EMC2305_PWM 0x80 /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ EXTRA_ENV_SETTINGS \ "boot_scripts=lx2160ardb_boot.scr\0" \ "boot_script_hdr=hdr_lx2160ardb_bs.out\0" \ diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h index 157688ef7d7..54d7cea4c59 100644 --- a/include/configs/lx2162aqds.h +++ b/include/configs/lx2162aqds.h @@ -14,7 +14,7 @@ #define CFG_SYS_RTC_BUS_NUM 0 /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ EXTRA_ENV_SETTINGS \ "boot_scripts=lx2162aqds_boot.scr\0" \ "boot_script_hdr=hdr_lx2162aqds_bs.out\0" \ diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 66591390d90..1ecbba1b58f 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -31,7 +31,7 @@ /* * Serial Driver */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* * MMC Driver @@ -45,17 +45,16 @@ */ #ifdef CONFIG_CMD_NAND #define CFG_SYS_NAND_BASE NFC_BASE_ADDR_AXI -#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI -#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR +#define CFG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI +#define CFG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR #define CFG_SYS_NAND_LARGEPAGE -#define CONFIG_MXC_NAND_HWECC #endif /* * Ethernet on SOC (FEC) */ #ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CFG_FEC_MXC_PHYADDR 0x0 #endif #define CFG_SYS_RTC_BUS_NUM 1 /* I2C2 */ @@ -71,9 +70,9 @@ * USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORT 1 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif /* LVDS display */ @@ -84,9 +83,8 @@ /* * Extra Environments */ -#define CONFIG_HOSTNAME "m53menlo" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "consdev=ttymxc0\0" \ "baudrate=115200\0" \ "bootscript=boot.scr\0" \ diff --git a/include/configs/malta.h b/include/configs/malta.h index 65f4b05649b..c17a4a4a8e5 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -9,9 +9,6 @@ /* * System configuration */ -#define CONFIG_MALTA - -#define CONFIG_MEMSIZE_IN_BYTES /* * CPU Configuration diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 5ad945b5589..413597e09b2 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -19,7 +19,7 @@ */ /* I2C */ -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE /* SPI NOR flash default params, used by sf commands */ diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index 7c401a2cfd6..b64bf93bcb7 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -17,7 +17,7 @@ * mode from SD card (SD2) */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configuration */ #define CFG_SYS_FSL_USDHC_NUM 2 @@ -25,16 +25,15 @@ /* NOR 16-bit mode */ #define CFG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR -#define CONFIG_FLASH_VERIFY /* NOR Flash MTD */ #define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) } #define CFG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) } /* Ethernet Configuration */ -#define CONFIG_FEC_MXC_PHYADDR 1 +#define CFG_FEC_MXC_PHYADDR 1 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200 quiet\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index a8d8d8b09e0..8dbe741278a 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -12,10 +12,9 @@ #include "tegra20-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom-Wide" +#define CFG_TEGRA_BOARD_STRING "Avionic Design Medcom-Wide" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ diff --git a/include/configs/meerkat96.h b/include/configs/meerkat96.h index 9e480fe0558..6ffc1282411 100644 --- a/include/configs/meerkat96.h +++ b/include/configs/meerkat96.h @@ -24,6 +24,6 @@ /* Environment configs */ /* USB configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif diff --git a/include/configs/meesc.h b/include/configs/meesc.h index d190e4b5039..38da55c70bf 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -60,6 +60,6 @@ #endif /* hw-controller addresses */ -#define CONFIG_ET1100_BASE 0x70000000 +#define CFG_ET1100_BASE 0x70000000 #endif diff --git a/include/configs/meson64.h b/include/configs/meson64.h index 6331b7615db..9244601284b 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -18,7 +18,7 @@ /* Serial drivers */ /* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, \ 230400, 250000, 460800, 500000, 1000000, 2000000, 4000000, \ 8000000 } @@ -83,8 +83,8 @@ #include <config_distro_bootcmd.h> -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "stdin=" STDIN_CFG "\0" \ "stdout=" STDOUT_CFG "\0" \ "stderr=" STDOUT_CFG "\0" \ diff --git a/include/configs/meson64_android.h b/include/configs/meson64_android.h index 1266851196d..c0e977abb01 100644 --- a/include/configs/meson64_android.h +++ b/include/configs/meson64_android.h @@ -279,7 +279,7 @@ "fi;" \ "fi;" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ EXTRA_ANDROID_ENV_SETTINGS \ "partitions=" PARTS_DEFAULT "\0" \ "mmcdev=2\0" \ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index edd2466caa9..6740ab2be3e 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -16,8 +16,6 @@ # define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -#define CONFIG_HOSTNAME "microblaze-generic" - /* architecture dependent code */ #if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP) #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) @@ -78,8 +76,8 @@ #include <config_distro_bootcmd.h> -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "unlock=yes\0"\ "nor0=flash-0\0"\ "mtdparts=mtdparts=flash-0:"\ diff --git a/include/configs/microchip_mpfs_icicle.h b/include/configs/microchip_mpfs_icicle.h index 3def93d61e8..5ced45b88b2 100644 --- a/include/configs/microchip_mpfs_icicle.h +++ b/include/configs/microchip_mpfs_icicle.h @@ -11,8 +11,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 - /* Environment options */ #define BOOT_TARGET_DEVICES(func) \ @@ -21,7 +19,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "kernel_addr_r=0x84000000\0" \ "fdt_addr_r=0x88000000\0" \ diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h index 50c52f8839b..4a12c2f72c6 100644 --- a/include/configs/minnowmax.h +++ b/include/configs/minnowmax.h @@ -12,12 +12,11 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,serial\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=usbkbd,serial\0" \ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" \ "usb_pgood_delay=40\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO #endif /* __CONFIG_H */ diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h index cfe926c0a14..c1c1fd5a784 100644 --- a/include/configs/msc_sm2s_imx8mp.h +++ b/include/configs/msc_sm2s_imx8mp.h @@ -17,7 +17,7 @@ #define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #if defined(CONFIG_CMD_NET) -#define CONFIG_FEC_MXC_PHYADDR 1 +#define CFG_FEC_MXC_PHYADDR 1 #define PHY_ANEG_TIMEOUT 20000 #endif @@ -30,7 +30,7 @@ #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ @@ -55,7 +55,7 @@ #define PHYS_SDRAM_2 0xc0000000 #define PHYS_SDRAM_2_SIZE 0x0 -#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR +#define CFG_MXC_UART_BASE UART2_BASE_ADDR #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h index 7c8c67f4469..a9574940d42 100644 --- a/include/configs/mt7621.h +++ b/include/configs/mt7621.h @@ -10,8 +10,7 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_VERY_BIG_RAM -#define CONFIG_MAX_MEM_MAPPED 0x1c000000 +#define CFG_MAX_MEM_MAPPED 0x1c000000 #define CFG_SYS_INIT_SP_OFFSET 0x800000 diff --git a/include/configs/mt7622.h b/include/configs/mt7622.h index 8c297266d8b..65415129534 100644 --- a/include/configs/mt7622.h +++ b/include/configs/mt7622.h @@ -18,7 +18,5 @@ #define CFG_SYS_SDRAM_BASE 0x40000000 /* Ethernet */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.3 #endif diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h index 39a7ba76633..db12377b004 100644 --- a/include/configs/mt7623.h +++ b/include/configs/mt7623.h @@ -33,8 +33,6 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" /* Ethernet */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.2 #ifdef CONFIG_DISTRO_DEFAULTS @@ -44,7 +42,7 @@ #include <config_distro_bootcmd.h> /* Extra environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h index bfa44aacc72..f6ab486fa29 100644 --- a/include/configs/mt7629.h +++ b/include/configs/mt7629.h @@ -15,10 +15,7 @@ /* Environment */ -/* Defines for SPL */ - -#define CONFIG_SPI_ADDR 0x30000000 -#define CFG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR + CONFIG_SPL_PAD_TO) +#define CFG_SYS_UBOOT_BASE (0x30000000 + CONFIG_SPL_PAD_TO) /* SPL -> Uboot */ @@ -28,7 +25,5 @@ #define CFG_SYS_SDRAM_BASE 0x40000000 /* Ethernet */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.2 #endif diff --git a/include/configs/mt8183.h b/include/configs/mt8183.h index 3da7619d78d..1f973829bba 100644 --- a/include/configs/mt8183.h +++ b/include/configs/mt8183.h @@ -21,7 +21,7 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "scriptaddr=0x40000000\0" \ BOOTENV diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h index 3a35527da10..c0fc8688ca6 100644 --- a/include/configs/mt8512.h +++ b/include/configs/mt8512.h @@ -26,7 +26,7 @@ #define ENV_BOOT_CMD \ "mtk_boot=run boot_rd_img;bootm;\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x6c000000\0" \ ENV_DEVICE_SETTINGS \ ENV_BOOT_READ_IMAGE \ diff --git a/include/configs/mt8516.h b/include/configs/mt8516.h index 0f7981a5661..73776e3705b 100644 --- a/include/configs/mt8516.h +++ b/include/configs/mt8516.h @@ -21,7 +21,7 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "scriptaddr=0x40000000\0" \ BOOTENV diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h index 8a8bc85ca70..d6bd1a10386 100644 --- a/include/configs/mt8518.h +++ b/include/configs/mt8518.h @@ -33,7 +33,7 @@ "serial#=1234567890ABCDEF\0" \ "board=mt8518\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x6c000000\0" \ ENV_DEVICE_SETTINGS \ ENV_BOOT_READ_IMAGE \ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index fa275d61d18..3dfcb138b49 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -33,7 +33,7 @@ * NS16550 Configuration */ #define CFG_SYS_NS16550_CLK CFG_SYS_TCLK -#if !defined(CONFIG_DM_SERIAL) +#if !CONFIG_IS_ENABLED(DM_SERIAL) #define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE #endif diff --git a/include/configs/mvebu_alleycat-5.h b/include/configs/mvebu_alleycat-5.h index 5c9620371e3..39e37ffbf7c 100644 --- a/include/configs/mvebu_alleycat-5.h +++ b/include/configs/mvebu_alleycat-5.h @@ -15,11 +15,6 @@ 115200, 230400, 460800, 921600 } /* Default Env vars */ -#define CONFIG_IPADDR 0.0.0.0 /* In order to cause an error */ -#define CONFIG_SERVERIP 0.0.0.0 /* In order to cause an error */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_GATEWAYIP 0.0.0.0 -#define CONFIG_ROOTPATH "/srv/nfs/" /* Default Dir for NFS */ #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ @@ -27,7 +22,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "kernel_addr_r=0x202000000\0" \ "fdt_addr_r=0x201000000\0" \ diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index 9bfc48c52d9..76e148f55eb 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -89,7 +89,7 @@ "" /* fdt_addr and kernel_addr are needed for existing distribution boot scripts */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "scriptaddr=0x6d00000\0" \ "pxefile_addr_r=0x6e00000\0" \ "fdt_addr=0x6f00000\0" \ diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index beac3ae6496..239a09763ae 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -41,7 +41,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "scriptaddr=0x6d00000\0" \ "pxefile_addr_r=0x6e00000\0" \ "fdt_addr_r=0x6f00000\0" \ diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index aa3d7a1a3fc..e769ba2e837 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -19,7 +19,7 @@ /* Ethernet */ /* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ "if mmc rescan ; then " \ diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index f597cdb3056..5ceba8b15fa 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -16,7 +16,7 @@ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Extra Environments */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ "if mmc rescan ; then " \ diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index c740d853327..f9f65f6968e 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -18,7 +18,7 @@ /* UBI and NAND partitioning */ /* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "ubifs_file=filesystem.ubifs\0" \ "update_nand_full_filename=u-boot.nand\0" \ "update_nand_firmware_filename=u-boot.sb\0" \ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index ddd37b3936f..dff54d04a67 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -18,14 +18,14 @@ * Hardware drivers */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* PMIC Controller */ -#define CONFIG_FSL_PMIC_BUS 0 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 2500000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 +#define CFG_FSL_PMIC_BUS 0 +#define CFG_FSL_PMIC_CS 0 +#define CFG_FSL_PMIC_CLK 2500000 +#define CFG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CFG_FSL_PMIC_BITLEN 32 /* * MMC Configs @@ -33,13 +33,13 @@ #define CFG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR /* USB Configs */ -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI -#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED +#define CFG_MXC_USB_PORT 1 +#define CFG_MXC_USB_PORTSC PORT_PTS_ULPI +#define CFG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED /* Framebuffer and LCD */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "fdt_file=imx51-babbage.dtb\0" \ diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index cd806cb698e..e995776d30d 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -14,7 +14,7 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 @@ -23,9 +23,9 @@ /* USB Configs */ -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORT 1 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Command definition */ @@ -37,7 +37,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_addr_r=0x75000000\0" \ "pxefile_addr_r=0x73000000\0" \ "scriptaddr=0x74000000\0" \ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index d0107fcc8cb..7398804e6b5 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -11,15 +11,15 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 /* USB Configs */ -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORT 1 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* PMIC Controller */ #define CFG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 @@ -27,7 +27,7 @@ /* Command definition */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "fdt_addr=0x71000000\0" \ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 9464d6e44ae..df65dbeea41 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -12,9 +12,9 @@ #include <asm/arch/imx-regs.h> /* USB Configs */ -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORT 1 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Command definition */ @@ -35,7 +35,7 @@ "nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \ "${nfsserver}:${image}; bootm ${loadaddr}\0" \ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ PPD_CONFIG_NFS \ "image=/boot/fitImage\0" \ "dev=mmc\0" \ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 245530aa640..0b8233de8c4 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -9,14 +9,13 @@ #include <linux/stringify.h> #if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) -#define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ +#define CFG_SC_TIMER_CLK 8000000 /* 8Mhz */ #else #ifndef CONFIG_SYS_L2CACHE_OFF #define CFG_SYS_PL310_BASE L2_PL310_BASE #endif #endif -#define CONFIG_MXC_GPT_HCLK #include <linux/sizes.h> #include <asm/arch/imx-regs.h> diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index f7f209c20b5..f0d6405d301 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -15,13 +15,13 @@ #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR /* USB */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) /* Command definition */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "som_rev=undefined\0" \ "has_emmc=undefined\0" \ "fdtfile=undefined\0" \ diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h index f6d3b2eeb9c..f2edd13eb88 100644 --- a/include/configs/mx6memcal.h +++ b/include/configs/mx6memcal.h @@ -14,12 +14,12 @@ #ifdef CONFIG_SERIAL_CONSOLE_UART1 #if defined(CONFIG_MX6SL) -#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR +#define CFG_MXC_UART_BASE UART1_IPS_BASE_ADDR #else -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE #endif #elif defined(CONFIG_SERIAL_CONSOLE_UART2) -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE #else #error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx) #endif @@ -31,6 +31,6 @@ #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_MXC_USB_PORTSC PORT_PTS_UTMI +#define CFG_MXC_USB_PORTSC PORT_PTS_UTMI #endif /* __CONFIG_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 6294fd1e2c4..9c61350a33b 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -35,7 +35,7 @@ #define EMMC_ENV "" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "fdtfile=undefined\0" \ @@ -145,6 +145,4 @@ /* Environment organization */ -#define CONFIG_USBD_HS - #endif /* __MX6QSABRE_COMMON_CONFIG_H */ diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index 888da7ce365..05ae2fce1fd 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -8,12 +8,12 @@ #ifndef __MX6SABREAUTO_CONFIG_H #define __MX6SABREAUTO_CONFIG_H -#define CONFIG_MXC_UART_BASE UART4_BASE +#define CFG_MXC_UART_BASE UART4_BASE #define CONSOLE_DEV "ttymxc3" /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #define CFG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} } @@ -36,6 +36,6 @@ /* DMA stuff, needed for GPMI/MXS NAND support */ /* PMIC */ -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 #endif /* __MX6SABREAUTO_CONFIG_H */ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 78a554d0ccb..30d3b9d9307 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -8,7 +8,7 @@ #ifndef __MX6SABRESD_CONFIG_H #define __MX6SABRESD_CONFIG_H -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE #define CONSOLE_DEV "ttymxc0" #include "mx6sabre_common.h" @@ -20,17 +20,17 @@ #define CFG_SYS_FSL_USDHC_NUM 3 #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) +#define CFG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19) #endif /* PMIC */ -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif #endif /* __MX6SABRESD_CONFIG_H */ diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 358d9f47c0f..39c8ef060c7 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -10,12 +10,12 @@ #include "mx6_common.h" -#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR +#define CFG_MXC_UART_BASE UART1_IPS_BASE_ADDR /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc0\0" \ @@ -90,8 +90,8 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif #define CFG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h index 8731f6a3e4a..290996b51bc 100644 --- a/include/configs/mx6sllevk.h +++ b/include/configs/mx6sllevk.h @@ -10,9 +10,9 @@ #include "mx6_common.h" -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "epdc_waveform=epdc_splash.bin\0" \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -94,7 +94,7 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif #include <linux/stringify.h> diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 0dd40563c29..1c14a6beb0a 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -10,9 +10,9 @@ #include "mx6_common.h" -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc0\0" \ @@ -93,11 +93,11 @@ /* Network */ #define IMX_FEC_BASE ENET2_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CFG_FEC_MXC_PHYADDR 0x0 #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif #define CFG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 6f5dffe4fbb..fe0ad34ef9c 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -12,7 +12,7 @@ #include "mx6_common.h" -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE #ifdef CONFIG_IMX_BOOTAUX @@ -34,7 +34,7 @@ #define UPDATE_M4_ENV "" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ UPDATE_M4_ENV \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -115,16 +115,16 @@ /* Network */ -#define CONFIG_FEC_MXC_PHYADDR 0x1 +#define CFG_FEC_MXC_PHYADDR 0x1 #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) +#define CFG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index cb1019bd56a..635ae78abcb 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -15,7 +15,7 @@ #define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #ifdef CONFIG_FSL_USDHC @@ -30,7 +30,7 @@ #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc0\0" \ @@ -116,17 +116,17 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif #ifdef CONFIG_CMD_NET -#define CONFIG_FEC_ENET_DEV 1 +#define CFG_FEC_ENET_DEV 1 -#if (CONFIG_FEC_ENET_DEV == 0) -#define CONFIG_FEC_MXC_PHYADDR 0x2 -#elif (CONFIG_FEC_ENET_DEV == 1) -#define CONFIG_FEC_MXC_PHYADDR 0x1 +#if (CFG_FEC_ENET_DEV == 0) +#define CFG_FEC_MXC_PHYADDR 0x2 +#elif (CFG_FEC_ENET_DEV == 1) +#define CFG_FEC_MXC_PHYADDR 0x1 #endif #endif diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 0e986093f35..2c3cd32cefa 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -16,7 +16,7 @@ #define PHYS_SDRAM_SIZE SZ_512M -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #ifdef CONFIG_FSL_USDHC @@ -24,7 +24,7 @@ #define CFG_SYS_FSL_USDHC_NUM 2 #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc0\0" \ @@ -109,7 +109,7 @@ /* environment organization */ #ifdef CONFIG_CMD_NET -#define CONFIG_FEC_ENET_DEV 1 +#define CFG_FEC_ENET_DEV 1 #endif #endif diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index d5af6990107..a542839ce1d 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -14,8 +14,7 @@ #include <asm/mach-imx/gpio.h> /* Timer settings */ -#define CONFIG_MXC_GPT_HCLK -#define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ +#define CFG_SC_TIMER_CLK 8000000 /* 8Mhz */ /* Miscellaneous configurable options */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 6c165521f7a..94bee75fdea 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -32,7 +32,7 @@ #define UPDATE_M4_ENV "" #endif -#define CONFIG_MFG_ENV_SETTINGS \ +#define CFG_MFG_ENV_SETTINGS \ "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ "rdinit=/linuxrc " \ "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ @@ -44,16 +44,16 @@ "initrd_high=0xffffffff\0" \ "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ -#define CONFIG_DFU_ENV_SETTINGS \ +#define CFG_DFU_ENV_SETTINGS \ "dfu_alt_info=image raw 0 0x800000;"\ "u-boot raw 0 0x4000;"\ "bootimg part 0 1;"\ "rootfs part 0 2\0" \ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ UPDATE_M4_ENV \ - CONFIG_MFG_ENV_SETTINGS \ - CONFIG_DFU_ENV_SETTINGS \ + CFG_MFG_ENV_SETTINGS \ + CFG_DFU_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc0\0" \ @@ -99,8 +99,6 @@ #endif /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) - -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index 85922fa436c..a310c64e794 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -28,7 +28,7 @@ #define PHYS_SDRAM 0x60000000 #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ "console=ttyLP0\0" \ "fdt_high=0xffffffff\0" \ @@ -51,5 +51,5 @@ #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CFG_SYS_INIT_RAM_SIZE SZ_256K -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 99e01896c71..5f4cd930623 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -28,7 +28,7 @@ #define PHYS_SDRAM_SIZE SZ_1G #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttyLP0\0" \ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 30f27e7f0c1..6ebfee69271 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -77,8 +77,8 @@ * DUART Serial Driver. * Conflicts with AUART driver which can be set by board. */ -#define CONFIG_PL011_CLOCK 24000000 -#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } +#define CFG_PL011_CLOCK 24000000 +#define CFG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } /* Default baudrate can be overridden by board! */ /* NAND */ @@ -86,9 +86,4 @@ #define CFG_SYS_NAND_BASE 0x60000000 #endif -/* SPI */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_SPI_HALF_DUPLEX -#endif - #endif /* __CONFIGS_MXS_H__ */ diff --git a/include/configs/mys_6ulx.h b/include/configs/mys_6ulx.h index a32fcd57f8f..2571098d06c 100644 --- a/include/configs/mys_6ulx.h +++ b/include/configs/mys_6ulx.h @@ -13,7 +13,7 @@ #define CFG_SYS_FSL_USDHC_NUM 1 /* Console configs */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR @@ -30,10 +30,10 @@ #define CFG_SYS_NAND_BASE 0x40000000 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200n8\0" \ "fdt_addr_r=0x82000000\0" \ "fdt_high=0xffffffff\0" \ diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 1b7eb343348..358c3bb85a5 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -35,20 +35,8 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs=console=ttyS0,115200\0" \ "autostart=no\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 8 -#endif /* CONFIG_CMD_NET */ - -/* - * EFI partition - */ - #endif /* _CONFIG_NAS220_H */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 5020b3bb71d..c9c599d0762 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -11,20 +11,18 @@ #include "mx6_common.h" -#define CONFIG_USBD_HS - -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 #define CFG_SYS_FSL_USDHC_NUM 2 #define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 6 +#define CFG_FEC_MXC_PHYADDR 6 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #ifdef CONFIG_CMD_MMC #define DISTRO_BOOT_DEV_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) @@ -66,7 +64,7 @@ #include <config_distro_bootcmd.h> #include <linux/stringify.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc1\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index caaa9ed86b3..54eea322dd3 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -58,7 +58,7 @@ #define CFG_SYS_ONENAND_BASE ONENAND_MAP /* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "usbtty=cdc_acm\0" \ "stdin=usbtty,serial,keyboard\0" \ "stdout=usbtty,serial,vidconsole\0" \ @@ -128,7 +128,7 @@ "bootmenu_delay=30\0" \ "" -#define CONFIG_POSTBOOTMENU \ +#define CFG_POSTBOOTMENU \ "echo;" \ "echo Extra commands:;" \ "echo run sdboot - Boot from SD card slot.;" \ @@ -169,6 +169,6 @@ #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) /* Reserve protected RAM for attached kernel */ -#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) +#define CFG_PRAM ((KERNEL_MAXSIZE >> 10)+1) #endif /* __CONFIG_H */ diff --git a/include/configs/novena.h b/include/configs/novena.h index 4e46dfc526c..39d3afd1c8e 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -25,7 +25,6 @@ */ /* Booting Linux */ -#define CONFIG_HOSTNAME "novena" /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -34,9 +33,6 @@ #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE -/* I2C */ -#define CONFIG_I2C_MULTI_BUS - /* I2C EEPROM */ /* MMC Configs */ @@ -45,26 +41,24 @@ /* PCI express */ #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29) +#define CFG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12) #endif /* PMIC */ -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 /* UART */ -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -/* Gadget part */ -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif /* Extra U-Boot environment. */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "consdev=ttymxc1\0" \ diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h index 09c4ddb6646..5f933391cc0 100644 --- a/include/configs/npi_imx6ull.h +++ b/include/configs/npi_imx6ull.h @@ -13,13 +13,11 @@ #define CFG_SYS_FSL_USDHC_NUM 1 /* Console configs */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR -#define CONFIG_NETMASK 255.255.255.0 - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -31,16 +29,16 @@ #define CFG_SYS_NAND_BASE 0x40000000 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC_PHYADDR 0x1 +#define CFG_FEC_MXC_PHYADDR 0x1 #endif -#define CONFIG_FEC_ENET_DEV 1 +#define CFG_FEC_ENET_DEV 1 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200n8\0" \ "image=zImage\0" \ "fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \ diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 62f07011809..fa029a176bd 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -36,7 +36,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "kernel=/boot/zImage\0" \ "fdt=/boot/nsa310s.dtb\0" \ @@ -46,8 +46,4 @@ #endif /* CONFIG_SPL_BUILD */ -/* Ethernet driver configuration */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 1 - #endif /* _CONFIG_NSA310S_H */ diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index baa452156ec..c04d402deb0 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -12,15 +12,11 @@ #include "tegra124-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "Google/NVIDIA Nyan-big" +#define CFG_TEGRA_BOARD_STRING "Google/NVIDIA Nyan-big" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/o4-imx6ull-nano.h b/include/configs/o4-imx6ull-nano.h index ea1edab9fc1..9050da8738b 100644 --- a/include/configs/o4-imx6ull-nano.h +++ b/include/configs/o4-imx6ull-nano.h @@ -12,10 +12,10 @@ #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #if IS_ENABLED(CONFIG_CMD_USB) -# define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +# define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* CONFIG_CMD_USB */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "mmcdev=0\0" \ "mmcpart=2\0" \ "mmcargs=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcpart} console=ttymxc0,${baudrate} panic=30\0" \ diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index 03d1a8e7b5f..c4db38562d8 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -15,7 +15,7 @@ /** Stack starting address */ /** Extra environment settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=20080000\0" \ "ethrotate=yes\0" diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 58275ccffa0..0be26ef3287 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -17,7 +17,7 @@ #include <config_distro_bootcmd.h> /* Extra environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x20080000\0" \ "kernel_addr_r=0x02000000\0" \ "ramdisk_addr_r=0x03000000\0" \ @@ -27,7 +27,7 @@ #else /** Extra environment settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=20080000\0" \ "autoload=0\0" diff --git a/include/configs/odroid.h b/include/configs/odroid.h index f252b349437..560a23c23ef 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -27,7 +27,7 @@ #define PARTS_BOOT "boot" #define PARTS_ROOT "platform" -#define CONFIG_DFU_ALT \ +#define CFG_DFU_ALT \ "uImage fat 0 1;" \ "zImage fat 0 1;" \ "Image.itb fat 0 1;" \ @@ -37,15 +37,15 @@ ""PARTS_BOOT" part 0 1;" \ ""PARTS_ROOT" part 0 2\0" \ -#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) +#define CFG_SET_DFU_ALT_BUF_LEN (SZ_1K) -#define CONFIG_DFU_ALT_BOOT_EMMC \ +#define CFG_DFU_ALT_BOOT_EMMC \ "u-boot raw 0x3e 0x800 mmcpart 1;" \ "bl1 raw 0x0 0x1e mmcpart 1;" \ "bl2 raw 0x1e 0x1d mmcpart 1;" \ "tzsw raw 0x83e 0x138 mmcpart 1\0" -#define CONFIG_DFU_ALT_BOOT_SD \ +#define CFG_DFU_ALT_BOOT_SD \ "u-boot raw 0x3f 0x800;" \ "bl1 raw 0x1 0x1e;" \ "bl2 raw 0x1f 0x1d;" \ @@ -71,7 +71,7 @@ * 1. BOOT: 100MiB 2MiB * 2. ROOT: - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \ "boot.scr\0" \ "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kernel_addr_r} " \ @@ -132,7 +132,7 @@ "mmcbootpart=1\0" \ "mmcrootdev=0\0" \ "mmcrootpart=2\0" \ - "dfu_alt_system="CONFIG_DFU_ALT \ + "dfu_alt_system="CFG_DFU_ALT \ "dfu_alt_info=Please reset the board\0" \ "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \ "consoleoff=set console console=ram; save; reset\0" \ diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 5bbe7aadcb2..58b5ee6ea0a 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -20,15 +20,7 @@ #define DFU_DEFAULT_POLL_TIMEOUT 300 #define DFU_MANIFEST_POLL_TIMEOUT 25000 -/* THOR */ -#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D - -/* UMS */ -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 - -#define CONFIG_DFU_ALT_SYSTEM \ +#define CFG_DFU_ALT_SYSTEM \ "uImage fat 0 1;" \ "zImage fat 0 1;" \ "Image.itb fat 0 1;" \ @@ -42,14 +34,14 @@ "boot part 0 1;" \ "root part 0 2\0" -#define CONFIG_DFU_ALT_BOOT_EMMC \ +#define CFG_DFU_ALT_BOOT_EMMC \ "u-boot raw 0x3e 0x800 mmcpart 1;" \ "bl1 raw 0x0 0x1e mmcpart 1;" \ "bl2 raw 0x1e 0x1d mmcpart 1;" \ "tzsw raw 0x83e 0x200 mmcpart 1;" \ "params.bin raw 0x1880 0x20\0" -#define CONFIG_DFU_ALT_BOOT_SD \ +#define CFG_DFU_ALT_BOOT_SD \ "u-boot raw 0x3f 0x800;" \ "bl1 raw 0x1 0x1e;" \ "bl2 raw 0x1f 0x1d;" \ @@ -57,10 +49,10 @@ "params.bin raw 0x1880 0x20\0" /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ -#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) +#define CFG_SET_DFU_ALT_BUF_LEN (SZ_1K) /* Set soc_rev, soc_id, board_rev, board_name, fdtfile */ -#define CONFIG_ODROID_REV_AIN 9 +#define CFG_ODROID_REV_AIN 9 /* * Need to override existing one (smdk5420) with odroid so set_board_info will @@ -68,8 +60,8 @@ */ /* Define new extra env settings, including DFU settings */ -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ EXYNOS_DEVICE_SETTINGS \ EXYNOS_FDTFILE_SETTING \ MEM_LAYOUT_ENV_SETTINGS \ @@ -83,7 +75,7 @@ "mmcrootdev=0\0" \ "mmcbootpart=1\0" \ "mmcrootpart=2\0" \ - "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \ + "dfu_alt_system="CFG_DFU_ALT_SYSTEM \ "dfu_alt_info=Autoset by THOR/DFU command run.\0" #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index f4e23bbb0f3..af7cb3513f8 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -29,7 +29,7 @@ #endif /* CONFIG_MTD_RAW_NAND */ /* Enable Multi Bus support for I2C */ -#define CONFIG_I2C_MULTI_BUS +#define CFG_I2C_MULTI_BUS /* DSS Support */ @@ -73,7 +73,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "fdt_high=0xffffffff\0" \ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 8bb8521f1c1..adb25a62970 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -69,7 +69,7 @@ #include <environment/ti/mmc.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ DEFAULT_FIT_TI_ARGS \ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index a6b5e55b541..93d36353ffb 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -59,7 +59,7 @@ "if test ${fdtfile} = ''; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_FINDFDT \ ENV_DEVICE_SETTINGS \ MEM_LAYOUT_SETTINGS \ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 38955377510..957f1c369e6 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -30,7 +30,7 @@ /* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "mmcdev=0\0" \ "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index d7fa2d43914..39d0b403139 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -32,9 +32,6 @@ /* MMC ENV related defines */ -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - /* Required support for the TCA642X GPIO we have on the uEVM */ #define CFG_SYS_I2C_TCA642X_BUS_NUM 4 #define CFG_SYS_I2C_TCA642X_ADDR 0x22 diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 788a1113868..af0093511a0 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -26,7 +26,7 @@ */ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ +#define CFG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ /* memtest start addr */ @@ -109,7 +109,6 @@ #define CFG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE #define CFG_SYS_NAND_MASK_CLE 0x10 #define CFG_SYS_NAND_MASK_ALE 0x8 -#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC #define CFG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CFG_SYS_NAND_U_BOOT_DST 0xc1080000 #define CFG_SYS_NAND_U_BOOT_START CFG_SYS_NAND_U_BOOT_DST @@ -138,7 +137,7 @@ #include <environment/ti/mmc.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ "bootpart=0:2\0" \ diff --git a/include/configs/openpiton-riscv64.h b/include/configs/openpiton-riscv64.h index 5b097e9fef2..5adfc671958 100644 --- a/include/configs/openpiton-riscv64.h +++ b/include/configs/openpiton-riscv64.h @@ -20,7 +20,7 @@ * Board boot configuration */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_addr_r=0x86000000\0" \ "kernel_addr_r=0x80200000\0" \ "image=boot/Image\0" \ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 006f06e6af5..1e6b16b4e70 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -27,32 +27,10 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \ +#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \ CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -# ifdef CONFIG_BOARD_IS_OPENRD_BASE -# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -# else -# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -# endif -# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE -# define CONFIG_PHY_BASE_ADR 0x0 -# define PHY_NO "88E1121" -# else -# define CONFIG_PHY_BASE_ADR 0x8 -# define PHY_NO "88E1116" -# endif -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ - #endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index e42a736136b..1edb1826c4e 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -11,7 +11,6 @@ #include "mx6_common.h" /* Miscellaneous configurable options */ -#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR /* Physical Memory Map */ #define CFG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR @@ -20,13 +19,11 @@ /* USB */ #ifdef CONFIG_USB_EHCI_MX6 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif /* LCD */ #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR -#define CONFIG_ROOTPATH "/tftpboot/opos6ul-root" - #endif /* __OPOS6ULDEV_CONFIG_H */ diff --git a/include/configs/origen.h b/include/configs/origen.h index 6633d541a31..fd4cc70a670 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -23,7 +23,7 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x40007000\0" \ "rdaddr=0x48000000\0" \ "kerneladdr=0x40007000\0" \ @@ -38,10 +38,4 @@ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" -/* MIU (Memory Interleaving Unit) */ -#define CONFIG_MIU_2BIT_21_7_INTERLEAVED - -#define RESERVE_BLOCK_SIZE (512) -#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ - #endif /* __CONFIG_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 9738e9fa9cb..f5bd0913449 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -13,7 +13,7 @@ #include <linux/stringify.h> #if defined(CONFIG_TARGET_P1020RDB_PC) -#define CONFIG_SLIC +#define CFG_SLIC #define __SW_BOOT_MASK 0x03 #define __SW_BOOT_NOR 0x5c #define __SW_BOOT_SPI 0x1c @@ -42,7 +42,7 @@ * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off */ #if defined(CONFIG_TARGET_P1020RDB_PD) -#define CONFIG_SLIC +#define CFG_SLIC #define __SW_BOOT_MASK 0x03 #define __SW_BOOT_NOR 0x64 #define __SW_BOOT_SPI 0x34 @@ -105,15 +105,10 @@ #endif /* not CONFIG_TPL_BUILD */ #endif -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#ifndef CFG_RESET_VECTOR_ADDRESS +#define CFG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE - #define CFG_SYS_CCSRBAR 0xffe00000 #define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR @@ -193,13 +188,12 @@ #define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) \ +#define CFG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) \ | BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 +#define CFG_FLASH_OR_PRELIM 0xfc000ff7 #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ /* Nand Flash */ #ifdef CONFIG_NAND_FSL_ELBC @@ -276,7 +270,7 @@ #endif /* The size of the VSC7385 firmware image */ -#define CONFIG_VSC7385_IMAGE_SIZE 8192 +#define CFG_VSC7385_IMAGE_SIZE 8192 #endif #ifndef __VSCFW_ADDR @@ -308,7 +302,6 @@ * open - index 2 * shorted - index 1 */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_SYS_NS16550_CLK get_bus_freq(0) #define CFG_SYS_BAUDRATE_TABLE \ @@ -366,27 +359,6 @@ #endif #endif /* CONFIG_PCI */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_TSEC1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 1 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#endif /* CONFIG_TSEC_ENET */ - /* * Environment */ @@ -418,15 +390,12 @@ /* * Environment Configuration */ -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #include "p1_p2_bootsrc.h" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ -"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ +"uboot=" CONFIG_UBOOTPATH "\0" \ "loadaddr=1000000\0" \ "bootfile=uImage\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ @@ -462,29 +431,4 @@ RST_PCIE_CMD(pciboot) \ RST_DEF_CMD(defboot) \ "" -#define CONFIG_USB_FAT_BOOT \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"usb start;" \ -"fatload usb 0:2 $loadaddr $bootfile;" \ -"fatload usb 0:2 $fdtaddr $fdtfile;" \ -"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_USB_EXT2_BOOT \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"usb start;" \ -"ext2load usb 0:4 $loadaddr $bootfile;" \ -"ext2load usb 0:4 $fdtaddr $fdtfile;" \ -"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_NORBOOT \ -"setenv bootargs root=/dev/$jffs2nor rw " \ -"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ -"bootm $norbootaddr - $norfdtaddr" - #endif /* __CONFIG_H */ diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h index ecd0405d297..a29d7135d0b 100644 --- a/include/configs/p2371-0000.h +++ b/include/configs/p2371-0000.h @@ -12,16 +12,12 @@ #include "tegra210-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-0000" +#define CFG_TEGRA_BOARD_STRING "NVIDIA P2371-0000" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2371_0000_H */ diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 7f942888e74..0b077aba659 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -12,16 +12,12 @@ #include "tegra210-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180" +#define CFG_TEGRA_BOARD_STRING "NVIDIA P2371-2180" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2371_2180_H */ diff --git a/include/configs/p2571.h b/include/configs/p2571.h index 50cddb4a4ac..5155aa7b1dd 100644 --- a/include/configs/p2571.h +++ b/include/configs/p2571.h @@ -12,16 +12,12 @@ #include "tegra210-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2571" +#define CFG_TEGRA_BOARD_STRING "NVIDIA P2571" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2571_H */ diff --git a/include/configs/p2771-0000.h b/include/configs/p2771-0000.h index 84cdd571962..e409cc3896d 100644 --- a/include/configs/p2771-0000.h +++ b/include/configs/p2771-0000.h @@ -11,7 +11,7 @@ #include "tegra186-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2771-0000" +#define CFG_TEGRA_BOARD_STRING "NVIDIA P2771-0000" /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index ec1a8634e71..e60f42eaa72 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -11,10 +11,9 @@ #include "tegra210-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P3450-0000" +#define CFG_TEGRA_BOARD_STRING "NVIDIA P3450-0000" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA /* Only MMC/PXE/DHCP for now, add USB back in later when supported */ #define BOOT_TARGET_DEVICES(func) \ @@ -23,9 +22,6 @@ func(PXE, pxe, na) \ func(DHCP, dhcp, na) -/* Environment at end of QSPI, in the VER partition */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #define BOARD_EXTRA_ENV_SETTINGS \ "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index a945f4e9b28..950b3217642 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -13,10 +13,9 @@ #include "tegra20-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "Compal Paz00" +#define CFG_TEGRA_BOARD_STRING "Compal Paz00" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/pcl063.h b/include/configs/pcl063.h index 2a1660bf188..38dcee05359 100644 --- a/include/configs/pcl063.h +++ b/include/configs/pcl063.h @@ -22,7 +22,7 @@ #define CFG_SYS_FSL_USDHC_NUM 1 /* Console configs */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ @@ -42,10 +42,10 @@ #define CFG_SYS_NAND_BASE 0x40000000 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200n8\0" \ "fdt_addr_r=0x82000000\0" \ "fdt_high=0xffffffff\0" \ diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h index 4421e740d9e..d742201ce43 100644 --- a/include/configs/pcl063_ull.h +++ b/include/configs/pcl063_ull.h @@ -22,7 +22,7 @@ #define MMC_ROOTFS_PART 2 /* Console configs */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configs */ @@ -44,8 +44,8 @@ #define CFG_SYS_NAND_BASE 0x40000000 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #define ENV_MMC \ "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \ @@ -65,7 +65,7 @@ "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \ /* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "console=ttymxc0,115200n8\0" \ "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \ diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 5c2ff5d02ee..34994016c54 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -29,7 +29,7 @@ /* boot command, including the target-defined one if any */ /* Extra env settings (including the target-defined ones if any) */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ PCM052_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h index 3674e4cddae..2991076c50a 100644 --- a/include/configs/pcm058.h +++ b/include/configs/pcm058.h @@ -39,7 +39,7 @@ "nandloadfit=ubi part rootfs;ubi readvol ${loadaddr} fit\0" \ "nandboot=run nandloadfit;run nandargs;bootm ${loadaddr}\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x30000000\0" \ "optargs=rw rootwait\0" \ ENV_MMC \ diff --git a/include/configs/pdu001.h b/include/configs/pdu001.h index 71807837673..80b14b002a9 100644 --- a/include/configs/pdu001.h +++ b/include/configs/pdu001.h @@ -32,7 +32,7 @@ #define CONSOLE_DEV "ttyO5" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "fdtfile=am335x-pdu001.dtb\0" \ "bootfile=zImage\0" \ diff --git a/include/configs/pg-wcom-expu1.h b/include/configs/pg-wcom-expu1.h index 1b72739d143..2c38cffa8a0 100644 --- a/include/configs/pg-wcom-expu1.h +++ b/include/configs/pg-wcom-expu1.h @@ -7,10 +7,6 @@ #define __CONFIG_PG_WCOM_EXPU1_H #define WCOM_EXPU1 -#define CONFIG_HOSTNAME "EXPU1" - -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" /* CLIPS FPGA Definitions */ #define CFG_SYS_CSPR3_EXT (0x00) diff --git a/include/configs/pg-wcom-seli8.h b/include/configs/pg-wcom-seli8.h index e4bcae5bb5e..9474d3bd7bd 100644 --- a/include/configs/pg-wcom-seli8.h +++ b/include/configs/pg-wcom-seli8.h @@ -6,11 +6,6 @@ #ifndef __CONFIG_PG_WCOM_SELI8_H #define __CONFIG_PG_WCOM_SELI8_H -#define CONFIG_HOSTNAME "SELI8" - -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" - /* PAXK FPGA Definitions */ #define CFG_SYS_CSPR3_EXT (0x00) #define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_PAX_BASE) | \ diff --git a/include/configs/phycore_am335x_r2.h b/include/configs/phycore_am335x_r2.h index f922491637d..4e6dc79f41b 100644 --- a/include/configs/phycore_am335x_r2.h +++ b/include/configs/phycore_am335x_r2.h @@ -62,7 +62,7 @@ #include <environment/ti/dfu.h> #include <environment/ti/mmc.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_MMC_TI_ARGS \ DEFAULT_LINUX_BOOT_ENV \ "bootfile=zImage\0" \ diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 7f73117ac1c..ce6dc87c69c 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -16,11 +16,11 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=Image\0" \ "console=ttymxc2,115200\0" \ "fdt_addr=0x48000000\0" \ diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 11a833bb127..d79d364c8e2 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -13,13 +13,7 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD - -#define CONFIG_POWER_PCA9450 - -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=Image\0" \ "console=ttymxc0,115200\0" \ "fdt_addr=0x48000000\0" \ diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index 3cc2a693cee..0ae4fc55a97 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -52,7 +52,7 @@ "fdt_addr_r=0x89d00000\0" \ "scriptaddr=0x88300000\0" \ -#define CONFIG_LEGACY_BOOTCMD_ENV \ +#define CFG_LEGACY_BOOTCMD_ENV \ "legacy_bootcmd= " \ "if load mmc 0 ${scriptaddr} uEnv.txt; then " \ "env import -tr ${scriptaddr} ${filesize}; " \ @@ -69,9 +69,9 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ - CONFIG_LEGACY_BOOTCMD_ENV \ + CFG_LEGACY_BOOTCMD_ENV \ BOOTENV #endif /* __PIC32MZDASK_CONFIG_H */ diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h index 6d7873daa0a..d806d7d9c57 100644 --- a/include/configs/pico-imx6.h +++ b/include/configs/pico-imx6.h @@ -10,18 +10,18 @@ #include "mx6_common.h" -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configuration */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_DFU_ENV_SETTINGS \ +#define CFG_DFU_ENV_SETTINGS \ "dfu_alt_info=" \ "spl raw 0x2 0x400;" \ "u-boot raw 0x8a 0x1000;" \ @@ -38,7 +38,7 @@ "bootmenu_3=Boot using PICO-Nymph baseboard=" \ "setenv baseboard nymph; saveenv; run base_boot\0" \ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTMENU_ENV \ @@ -47,7 +47,7 @@ "fdt_addr_r=0x18000000\0" \ "fdt_addr=0x18000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - CONFIG_DFU_ENV_SETTINGS \ + CFG_DFU_ENV_SETTINGS \ "finduuid=part uuid mmc 0:1 uuid\0" \ "findfdt="\ "if test $baseboard = hobbit && test $board_rev = MX6Q ; then " \ @@ -98,6 +98,6 @@ /* Environment organization */ /* Ethernet Configuration */ -#define CONFIG_FEC_MXC_PHYADDR 1 +#define CFG_FEC_MXC_PHYADDR 1 #endif /* __CONFIG_H * */ diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 8af8883fad6..4caa8233758 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -15,22 +15,20 @@ /* Network support */ -#define CONFIG_FEC_MXC_PHYADDR 0x1 +#define CFG_FEC_MXC_PHYADDR 0x1 -#define CONFIG_MXC_UART_BASE UART6_BASE_ADDR +#define CFG_MXC_UART_BASE UART6_BASE_ADDR /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 - -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_DFU_ENV_SETTINGS \ +#define CFG_DFU_ENV_SETTINGS \ "dfu_alt_info=" \ "spl raw 0x2 0x400;" \ "u-boot raw 0x8a 0x400;" \ @@ -47,7 +45,7 @@ "bootmenu_2=Boot using PICO-Pi baseboard=" \ "setenv fdtfile imx6ul-pico-pi.dtb\0" \ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "splashpos=m,m\0" \ @@ -65,7 +63,7 @@ "ramdiskaddr=0x83000000\0" \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "mmcautodetect=yes\0" \ - CONFIG_DFU_ENV_SETTINGS \ + CFG_DFU_ENV_SETTINGS \ "findfdt=" \ "if test $fdtfile = ask ; then " \ "bootmenu -1; fi;" \ diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index 83907b06ebb..5774184300c 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -10,12 +10,12 @@ #include "mx7_common.h" -#define CONFIG_MXC_UART_BASE UART5_IPS_BASE_ADDR +#define CFG_MXC_UART_BASE UART5_IPS_BASE_ADDR /* MMC Config */ #define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_DFU_ENV_SETTINGS \ +#define CFG_DFU_ENV_SETTINGS \ "dfu_alt_info=" \ "spl raw 0x2 0x400;" \ "u-boot raw 0x8a 0x1000;" \ @@ -51,7 +51,7 @@ BOOTENV #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ "splashpos=m,m\0" \ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ @@ -67,7 +67,7 @@ "ramdisk_addr_r=0x83000000\0" \ "ramdiskaddr=0x83000000\0" \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - CONFIG_DFU_ENV_SETTINGS \ + CFG_DFU_ENV_SETTINGS \ "findfdt=" \ "if test $fdtfile = ask ; then " \ "bootmenu -1; fi;" \ @@ -98,7 +98,7 @@ #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* PMIC */ -#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE3000_I2C_ADDR 0x08 /* FLASH and environment organization */ @@ -107,7 +107,7 @@ #define CFG_SYS_FSL_USDHC_NUM 2 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index f9301a5524b..be31f8a23ca 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -11,21 +11,20 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x182000 +#define CFG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ #endif /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_FEC_MXC_PHYADDR 1 +#define CFG_FEC_MXC_PHYADDR 1 #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=Image\0" \ "console=ttymxc0,115200\0" \ @@ -71,7 +70,7 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */ -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) +#define CFG_MXC_UART_BASE UART_BASE_ADDR(1) #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 99db59c489e..30bfce9f503 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -12,10 +12,9 @@ #include "tegra20-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux" +#define CFG_TEGRA_BOARD_STRING "Avionic Design Plutux" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index a233fb8ed74..f4a34f261a6 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -144,7 +144,7 @@ /* USB */ #define CFG_SYS_USB_OHCI_REGS_BASE 0x00500000 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 9fd897958a4..cd9d21e420b 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -159,16 +159,11 @@ /* PSRAM */ #define PHYS_PSRAM 0x70000000 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ -/* Slave EBI1, PSRAM connected */ -#define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \ - AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \ - AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \ - AT91_MATRIX_SCFG_SLOT_CYCLE(255)) /* USB */ #define CFG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 085732214e5..b1354219c9f 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -18,15 +18,9 @@ * Default environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs_console=console=ttyS0,115200\0" \ "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ "ext2load usb 0:1 0x01100000 /uInitrd\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_POGO_E02_H */ diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h index b5ce2dd13d0..33715790233 100644 --- a/include/configs/pogo_v4.h +++ b/include/configs/pogo_v4.h @@ -61,7 +61,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ LOAD_ADDRESS_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ @@ -69,10 +69,4 @@ BOOTENV #endif /* CONFIG_SPL_BUILD */ -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_POGO_V4_H */ diff --git a/include/configs/poleg.h b/include/configs/poleg.h index 518d7a3639c..c3f1d3393cb 100644 --- a/include/configs/poleg.h +++ b/include/configs/poleg.h @@ -14,10 +14,7 @@ #define CFG_SYS_SDRAM_BASE 0x0 /* Default environemnt variables */ -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_IPADDR 192.168.0.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \ +#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" \ diff --git a/include/configs/pomelo.h b/include/configs/pomelo.h index 1c11685f49e..8e74dc48887 100644 --- a/include/configs/pomelo.h +++ b/include/configs/pomelo.h @@ -21,7 +21,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=Image\0" \ BOOTENV \ "scriptaddr=0x90100000\0" \ diff --git a/include/configs/poplar.h b/include/configs/poplar.h index c58105597e4..6e8adf91877 100644 --- a/include/configs/poplar.h +++ b/include/configs/poplar.h @@ -31,7 +31,7 @@ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loader_mmc_blknum=0x0\0" \ "loader_mmc_nblks=0x780\0" \ "env_mmc_blknum=0xf80\0" \ diff --git a/include/configs/porter.h b/include/configs/porter.h index 88fa65e0ffc..2cb430be8b0 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -21,20 +21,17 @@ #define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (1024u * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0x1 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x1 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" /* SPL support */ diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 2b25c31b1d8..df07df6a5a7 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -54,7 +54,7 @@ #define GLOBAL_IO_DRIVE_CONTROL_OFFSET 0x4c /* max command args */ -#define CONFIG_EXTRA_ENV_SETTINGS "silent=y\0" +#define CFG_EXTRA_ENV_SETTINGS "silent=y\0" /* nand driver parameters */ #ifdef CONFIG_TARGET_PRESIDIO_ASIC diff --git a/include/configs/px30_common.h b/include/configs/px30_common.h index 99376155b49..3f1595cdc95 100644 --- a/include/configs/px30_common.h +++ b/include/configs/px30_common.h @@ -9,7 +9,7 @@ #include "rockchip-common.h" /* FIXME: ff020000 is pmu_mem (10k), while ff0e0000 is regular int_mem */ -#define CONFIG_IRAM_BASE 0xff020000 +#define CFG_IRAM_BASE 0xff020000 #define GICD_BASE 0xff131000 #define GICC_BASE 0xff132000 @@ -27,7 +27,7 @@ "ramdisk_addr_r=0x0a200000\0" #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 586a7edcbb5..b701e52076d 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -18,26 +18,26 @@ #define DDR_IOCTRL_VAL 0x18b #define DDR_PLL_FREQ 266 -#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ +#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ "button_dfu0=59\0" \ "led0=117,0,1\0" \ /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */ +#define CFG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */ /* Use common default */ /* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hostname=pxm2\0" \ "ubi_off=2048\0"\ "nand_img_size=0x500000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ - CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ "splashpos=m,m\0" \ - CONFIG_ENV_SETTINGS_V1 \ - CONFIG_ENV_SETTINGS_NAND_V1 \ + CFG_ENV_SETTINGS_V1 \ + CFG_ENV_SETTINGS_NAND_V1 \ "mmc_dev=0\0" \ "mmc_root=/dev/mmcblk0p2 rw\0" \ "mmc_root_fs_type=ext4 rootwait\0" \ diff --git a/include/configs/qcs404-evb.h b/include/configs/qcs404-evb.h index c41bb341d82..8ea59aa21ca 100644 --- a/include/configs/qcs404-evb.h +++ b/include/configs/qcs404-evb.h @@ -13,7 +13,7 @@ #define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x5000000\0" \ "bootm_low=0x80000000\0" \ "bootcmd=bootm $prevbl_initrd_start_addr\0" diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h index a67af73fd56..45bd94ee5c7 100644 --- a/include/configs/qemu-arm.h +++ b/include/configs/qemu-arm.h @@ -76,7 +76,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_addr=0x40000000\0" \ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 30a9eae8523..20be4af4628 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -29,7 +29,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -58,7 +57,5 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #endif /* __QEMU_PPCE500_H */ diff --git a/include/configs/qemu-riscv.h b/include/configs/qemu-riscv.h index 72f35cc0542..20135f569eb 100644 --- a/include/configs/qemu-riscv.h +++ b/include/configs/qemu-riscv.h @@ -10,8 +10,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 - #define RISCV_MMODE_TIMERBASE 0x2000000 #define RISCV_MMODE_TIMER_FREQ 1000000 @@ -36,7 +34,7 @@ #define BOOTENV_DEV_NAME_QEMU(devtypeu, devtypel, instance) \ "qemu " -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_addr_r=0x84000000\0" \ diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index 5cd13887084..33263a46a40 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -22,7 +22,7 @@ #include <config_distro_bootcmd.h> #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial,i8042-kbd\0" \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index 49cd11c17b4..2efb4d23cdd 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -21,7 +21,7 @@ #define BOARD_DFU_BUTTON_GPIO 27 #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ /* In dfu mode keep led1 on */ -#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ +#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ "button_dfu0=27\0" \ "button_dfu1=87\0" \ "led0=3,0,1\0" \ @@ -32,20 +32,20 @@ "led5=63,0,1\0" /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ +#define CFG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ #define EEPROM_ADDR_DDR3 0x90 #define EEPROM_ADDR_CHIP 0x120 /* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hostname=rastaban\0" \ "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ - CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - CONFIG_ENV_SETTINGS_V2 \ - CONFIG_ENV_SETTINGS_NAND_V2 + CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CFG_ENV_SETTINGS_V2 \ + CFG_ENV_SETTINGS_NAND_V2 #endif /* ! __CONFIG_RASTABAN_H */ diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index e9cbd253824..213caa75238 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -28,12 +28,11 @@ #define DRAM_RSV_SIZE 0x08000000 #define CFG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE) #define CFG_SYS_SDRAM_SIZE (0x80000000u - DRAM_RSV_SIZE) -#define CONFIG_VERY_BIG_RAM -#define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE) +#define CFG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE) /* ENV setting */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" #endif /* __RCAR_GEN3_COMMON_H */ diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index a4cae697181..ea6073f2944 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -25,7 +25,7 @@ /* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board, * so limit the fdt reallocation to that */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "fdt_high=0x7fffffff\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/rk3066_common.h b/include/configs/rk3066_common.h index 99c86edeaa4..1a6d3678df3 100644 --- a/include/configs/rk3066_common.h +++ b/include/configs/rk3066_common.h @@ -9,7 +9,7 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_IRAM_BASE 0x10080000 +#define CFG_IRAM_BASE 0x10080000 #define CFG_SYS_SDRAM_BASE 0x60000000 #define SDRAM_BANK_SIZE (1024UL << 20UL) @@ -24,7 +24,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x6fffffff\0" \ "initrd_high=0x6fffffff\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index 302546630ac..8aa17bfbd36 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -10,7 +10,7 @@ #define CFG_SYS_HZ_CLOCK 24000000 -#define CONFIG_IRAM_BASE 0x10080000 +#define CFG_IRAM_BASE 0x10080000 /* RAW SD card / eMMC locations. */ @@ -27,7 +27,7 @@ "ramdisk_addr_r=0x64000000\0" #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index 334fb3affa5..ac9195672fb 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -9,7 +9,7 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_IRAM_BASE 0x10080000 +#define CFG_IRAM_BASE 0x10080000 /* spl size 32kb sram - 2kb bootrom */ @@ -31,7 +31,7 @@ /* Linux fails to load the fdt if it's loaded above 256M on a Rock board, * so limit the fdt reallocation to that */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "fdt_high=0x6fffffff\0" \ "initrd_high=0x6fffffff\0" \ diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index 58ad62afe16..fcaf9c52c4b 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -10,7 +10,7 @@ #define CFG_SYS_HZ_CLOCK 24000000 -#define CONFIG_IRAM_BASE 0x10080000 +#define CFG_IRAM_BASE 0x10080000 #define CFG_SYS_SDRAM_BASE 0x60000000 #define SDRAM_BANK_SIZE (512UL << 20UL) @@ -27,7 +27,7 @@ /* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board, * so limit the fdt reallocation to that */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "fdt_high=0x7fffffff\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 6b55c57dd77..5f29432be10 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -11,7 +11,7 @@ #define CFG_SYS_HZ_CLOCK 24000000 -#define CONFIG_IRAM_BASE 0xff700000 +#define CFG_IRAM_BASE 0xff700000 /* RAW SD card / eMMC locations. */ @@ -30,7 +30,7 @@ /* Linux fails to load the fdt if it's loaded above 256M on a Rock 2 board, so * limit the fdt reallocation to that */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x0fffffff\0" \ "initrd_high=0x0fffffff\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h index 4b510b13991..55a0dfecb21 100644 --- a/include/configs/rk3308_common.h +++ b/include/configs/rk3308_common.h @@ -8,7 +8,7 @@ #include "rockchip-common.h" -#define CONFIG_IRAM_BASE 0xfff80000 +#define CFG_IRAM_BASE 0xfff80000 #define CFG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xff000000 @@ -22,7 +22,7 @@ "ramdisk_addr_r=0x04000000\0" #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "partitions=" PARTS_DEFAULT \ ROCKCHIP_DEVICE_SETTINGS \ diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h index 132b7d0fe9b..fadcb93a5f7 100644 --- a/include/configs/rk3328_common.h +++ b/include/configs/rk3328_common.h @@ -8,7 +8,7 @@ #include "rockchip-common.h" -#define CONFIG_IRAM_BASE 0xff090000 +#define CFG_IRAM_BASE 0xff090000 /* FAT sd card locations. */ #define CFG_SYS_SDRAM_BASE 0 @@ -22,7 +22,7 @@ "ramdisk_addr_r=0x06000000\0" #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index 92cdc1a51fb..9aa256b5959 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -14,7 +14,7 @@ #define CFG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xff000000 -#define CONFIG_IRAM_BASE 0xff8c0000 +#define CFG_IRAM_BASE 0xff8c0000 #define ENV_MEM_LAYOUT_SETTINGS \ "scriptaddr=0x00500000\0" \ @@ -25,7 +25,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index 78f624d31ca..95cb27c8951 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -8,22 +8,28 @@ #include "rockchip-common.h" -#define CONFIG_IRAM_BASE 0xff8c0000 - -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) -#else -/* BSS setup */ -#endif - -/* MMC/SD IP block */ -#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000 - -/* RAW SD card / eMMC locations. */ +#define CFG_IRAM_BASE 0xff8c0000 /* FAT sd card locations. */ #define CFG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xf8000000 +#define ROCKPI_4B_IDBLOADER_IMAGE_GUID \ + EFI_GUID(0x02f4d760, 0xcfd5, 0x43bd, 0x8e, 0x2d, \ + 0xa4, 0x2a, 0xcb, 0x33, 0xc6, 0x60) + +#define ROCKPI_4B_UBOOT_IMAGE_GUID \ + EFI_GUID(0x4ce292da, 0x1dd8, 0x428d, 0xa1, 0xc2, \ + 0x77, 0x74, 0x3e, 0xf8, 0xb9, 0x6e) + +#define ROCKPI_4C_IDBLOADER_IMAGE_GUID \ + EFI_GUID(0xfd68510c, 0x12d3, 0x4f0a, 0xb8, 0xd3, \ + 0xd8, 0x79, 0xe1, 0xd3, 0xa5, 0x40) + +#define ROCKPI_4C_UBOOT_IMAGE_GUID \ + EFI_GUID(0xb81fb4ae, 0xe4f3, 0x471b, 0x99, 0xb4, \ + 0x0b, 0x3d, 0xa5, 0x49, 0xce, 0x13) + #ifndef CONFIG_SPL_BUILD #define ENV_MEM_LAYOUT_SETTINGS \ @@ -44,7 +50,7 @@ #include <config_distro_bootcmd.h> #include <environment/distro/sf.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/rk3568_common.h b/include/configs/rk3568_common.h index d43dc2580e4..ae360105d50 100644 --- a/include/configs/rk3568_common.h +++ b/include/configs/rk3568_common.h @@ -8,7 +8,7 @@ #include "rockchip-common.h" -#define CONFIG_IRAM_BASE 0xfdcc0000 +#define CFG_IRAM_BASE 0xfdcc0000 #define CFG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xf0000000 @@ -21,7 +21,7 @@ "ramdisk_addr_r=0x0a200000\0" #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/rpi.h b/include/configs/rpi.h index e3549275138..c3f8e7bf85c 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -157,7 +157,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \ ENV_DEVICE_SETTINGS \ ENV_DFU_SETTINGS \ diff --git a/include/configs/rut.h b/include/configs/rut.h index ac48372b6c0..4002bc4b6c8 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -19,7 +19,7 @@ #define DDR_PLL_FREQ 303 /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MiB */ +#define CFG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MiB */ /* Watchdog */ #define WATCHDOG_TRIGGER_GPIO 14 @@ -27,14 +27,14 @@ /* Use common default */ /* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hostname=rut\0" \ "ubi_off=2048\0"\ "nand_img_size=0x500000\0" \ "splashpos=m,m\0" \ "optargs=fixrtc --no-log consoleblank=0 \0" \ - CONFIG_ENV_SETTINGS_V1 \ - CONFIG_ENV_SETTINGS_NAND_V1 \ + CFG_ENV_SETTINGS_V1 \ + CFG_ENV_SETTINGS_NAND_V1 \ "mmc_dev=0\0" \ "mmc_root=/dev/mmcblk0p2 rw\0" \ "mmc_root_fs_type=ext4 rootwait\0" \ diff --git a/include/configs/rv1108_common.h b/include/configs/rv1108_common.h index 84a5ae6965d..63551b47e20 100644 --- a/include/configs/rv1108_common.h +++ b/include/configs/rv1108_common.h @@ -8,7 +8,7 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_IRAM_BASE 0x10080000 +#define CFG_IRAM_BASE 0x10080000 #define CFG_SYS_TIMER_RATE (24 * 1000 * 1000) /* TIMER1,initialized by ddr initialize code */ @@ -26,7 +26,7 @@ "ramdisk_addr_r=0x64000000\0" #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "partitions=" PARTS_DEFAULT \ diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index e071d4da5e8..fec1bfd50eb 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -66,8 +66,6 @@ /*----------------------------------------------------------------------- * High Level System Configuration */ -/* Not used: not need IRQ/FIQ stuff */ -#undef CONFIG_USE_IRQ /* decrementer freq: 1ms ticks */ /*----------------------------------------------------------------------- @@ -78,11 +76,9 @@ /*----------------------------------------------------------------------- * serial console configuration */ -#define CONFIG_PL011_CLOCK 50000000 -#define CONFIG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \ - (void *)PHY_BASEADDR_UART1, \ - (void *)PHY_BASEADDR_UART2, \ - (void *)PHY_BASEADDR_UART3} + +/* 150MHz is the clock rate set by SPL (uart0) */ +#define CFG_PL011_CLOCK 150000000 /*----------------------------------------------------------------------- * BACKLIGHT @@ -142,7 +138,7 @@ #define EXTRA_ENV_BOOT_LOGO EXTRA_ENV_DTB_RESERVE #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "rootdev=" __stringify(CONFIG_ROOT_DEV) "\0" \ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index fdade1ee66f..d1ff00a27f8 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -24,13 +24,6 @@ /* USB Composite download gadget - g_dnl */ #define DFU_DEFAULT_POLL_TIMEOUT 300 -/* USB Samsung's IDs */ - -#define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 - /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ /* partitions definitions */ @@ -42,7 +35,7 @@ #define PARTS_CSC "csc" #define PARTS_UMS "ums" -#define CONFIG_DFU_ALT \ +#define CFG_DFU_ALT \ "u-boot raw 0x80 0x400;" \ "uImage ext4 0 2;" \ "exynos3-goni.dtb ext4 0 2;" \ @@ -61,7 +54,7 @@ #define COMMON_BOOT "${console} ${meminfo} ${mtdparts}" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "updateb=" \ "onenand erase 0x0 0x100000;" \ "onenand write 0x32008000 0x0 0x100000\0" \ @@ -109,7 +102,7 @@ "ubiblock=8\0" \ "ubi=enabled\0" \ "opts=always_resume=1\0" \ - "dfu_alt_info=" CONFIG_DFU_ALT "\0" + "dfu_alt_info=" CFG_DFU_ALT "\0" /* Goni has 3 banks of DRAM, but swap the bank */ #define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ @@ -119,9 +112,6 @@ #define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */ #define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */ -/* FLASH and environment organization */ -#define CONFIG_MMC_DEFAULT_DEV 0 - #define CFG_SYS_ONENAND_BASE 0xB0000000 #endif /* __CONFIG_H */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 80d3fc9258c..bf2d04a169b 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -29,7 +29,7 @@ ",100M(swap)"\ ",-(UMS)\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "updateb=" \ "onenand erase 0x0 0x100000;" \ "onenand write 0x42008000 0x0 0x100000\0" \ diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 2e422cd241e..8dc6702de48 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -13,7 +13,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/sam9x60_curiosity.h b/include/configs/sam9x60_curiosity.h index f44ce909b91..e79f80f17f6 100644 --- a/include/configs/sam9x60_curiosity.h +++ b/include/configs/sam9x60_curiosity.h @@ -13,8 +13,8 @@ #define CFG_SYS_AT91_SLOW_CLOCK 32768 #define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */ -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0 /* ignored in arm */ +#define CFG_USART_BASE ATMEL_BASE_DBGU +#define CFG_USART_ID 0 /* ignored in arm */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x20000000 diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index cb7f35c7ca4..af504e0efab 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -14,8 +14,8 @@ #define CFG_SYS_AT91_SLOW_CLOCK 32768 #define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */ -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0 /* ignored in arm */ +#define CFG_USART_BASE ATMEL_BASE_DBGU +#define CFG_USART_ID 0 /* ignored in arm */ /* * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0) diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 8d9af7f088d..4e5653dc886 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -6,7 +6,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MALLOC_F_ADDR 0x0010000 +#define CFG_MALLOC_F_ADDR 0x0010000 /* Size of our emulated memory */ #define SB_CONCAT(x, y) x ## y diff --git a/include/configs/sdm845.h b/include/configs/sdm845.h index f7cdd5a1956..9a4fe530a20 100644 --- a/include/configs/sdm845.h +++ b/include/configs/sdm845.h @@ -13,7 +13,7 @@ #define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x4000000\0" \ "bootm_low=0x80000000\0" \ "stdout=vidconsole\0" \ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index f272fe9bf8f..8e98620422d 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -12,10 +12,9 @@ #include "tegra20-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" +#define CFG_TEGRA_BOARD_STRING "NVIDIA Seaboard" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 19701ccce22..4e0b3c663c7 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -15,16 +15,10 @@ /* * Environment variables configurations */ -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ +#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ "=ttyS0,115200 mtdparts=" CONFIG_MTDPARTS_DEFAULT \ "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 5a001716fb0..7def657bcd1 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -17,8 +17,6 @@ /* commands to include */ -#define CONFIG_ROOTPATH "/opt/eldk" - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) @@ -72,9 +70,6 @@ * we don't need to do it twice. */ -/* USB DRACO ID as default */ -#define CONFIG_USBD_HS - /* USB Device Firmware Update support */ #define DFU_MANIFEST_POLL_TIMEOUT 25000 @@ -201,7 +196,7 @@ "kernel_b part 0 8;" \ "rootfs partubi 0 10" -#define CONFIG_ENV_SETTINGS_NAND_V1 \ +#define CFG_ENV_SETTINGS_NAND_V1 \ "nand_active_ubi_vol=rootfs_a\0" \ "nand_active_ubi_vol_A=rootfs_a\0" \ "nand_active_ubi_vol_B=rootfs_b\0" \ @@ -234,7 +229,7 @@ "${nand_img_size}; bootm ${kloadaddr}\0" \ COMMON_ENV_NAND_CMDS -#define CONFIG_ENV_SETTINGS_V1 \ +#define CFG_ENV_SETTINGS_V1 \ COMMON_ENV_SETTINGS \ "net_args=run bootargs_defaults;" \ "mtdparts default;" \ @@ -278,7 +273,7 @@ "u-boot.env1 part 0 7;" \ "rootfs partubi 0 9" \ -#define CONFIG_ENV_SETTINGS_NAND_V2 \ +#define CFG_ENV_SETTINGS_NAND_V2 \ "nand_active_ubi_vol=rootfs_a\0" \ "rootfs_name=rootfs\0" \ "kernel_name=uImage\0"\ @@ -311,7 +306,7 @@ "bootm ${kloadaddr} - ${loadaddr}\0" \ COMMON_ENV_NAND_CMDS -#define CONFIG_ENV_SETTINGS_V2 \ +#define CFG_ENV_SETTINGS_V2 \ COMMON_ENV_SETTINGS \ "net_args=run bootargs_defaults;" \ "mtdparts default;" \ diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index 5ad2124bdda..de3a0dcdd59 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -13,8 +13,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 - #define RISCV_MMODE_TIMERBASE 0x2000000 #define RISCV_MMODE_TIMER_FREQ 1000000 @@ -39,7 +37,7 @@ "name=loader2,size=4MB,type=${type_guid_gpt_loader2};" \ "name=system,size=-,bootable,type=${type_guid_gpt_system};" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_addr_r=0x84000000\0" \ diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index f4b1a16019e..24904aa2387 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -13,8 +13,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 - /* Environment options */ #define BOOT_TARGET_DEVICES(func) \ @@ -36,7 +34,7 @@ "name=loader2,size=4MB,type=${type_guid_gpt_loader2};" \ "name=system,size=-,bootable,type=${type_guid_gpt_system};" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x84000000\0" \ "kernel_comp_addr_r=0x88000000\0" \ "kernel_comp_size=0x4000000\0" \ diff --git a/include/configs/silk.h b/include/configs/silk.h index 58613effaf4..7bed32d8553 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -21,20 +21,17 @@ #define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0x1 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x1 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" /* SPL support */ diff --git a/include/configs/sipeed-maix.h b/include/configs/sipeed-maix.h index 974531ea0d8..760a0a5b913 100644 --- a/include/configs/sipeed-maix.h +++ b/include/configs/sipeed-maix.h @@ -11,8 +11,8 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 #define CFG_SYS_SDRAM_SIZE SZ_8M -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80060000\0" \ "fdt_addr_r=0x80400000\0" \ "scriptaddr=0x80020000\0" \ diff --git a/include/configs/slimbootloader.h b/include/configs/slimbootloader.h index ff0ed180e92..20b99a1021d 100644 --- a/include/configs/slimbootloader.h +++ b/include/configs/slimbootloader.h @@ -8,17 +8,17 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS \ +#define CFG_STD_DEVICES_SETTINGS \ "stdin=serial,i8042-kbd,usbkbd\0" \ "stdout=serial\0" \ "stderr=serial\0" /* - * Override CONFIG_EXTRA_ENV_SETTINGS in x86-common.h + * Override CFG_EXTRA_ENV_SETTINGS in x86-common.h */ -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_STD_DEVICES_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ + CFG_STD_DEVICES_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=0x4000000\0" \ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index b988b96e58d..75a1670e331 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -61,8 +61,8 @@ #define CFG_SYS_NAND_READY_PIN AT91_PIN_PC13 /* serial console */ -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS +#define CFG_USART_BASE ATMEL_BASE_DBGU +#define CFG_USART_ID ATMEL_ID_SYS /* DFU class support */ #define DFU_MANIFEST_POLL_TIMEOUT 25000 @@ -73,7 +73,7 @@ * Predefined environment variables. * Usefull to define some easy to use boot commands. */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ \ "basicargs=console=ttyS0,115200\0" \ \ diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 0392530c0ad..0cb70762d92 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -12,8 +12,6 @@ #include <configs/exynos5-dt-common.h> #include <configs/exynos5-common.h> -#define CONFIG_SMDK5420 /* which is in a SMDK5420 */ - #define CFG_SYS_SDRAM_BASE 0x20000000 /* DRAM Memory Banks */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index ffa1a1fcb0e..c148757915a 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -28,7 +28,7 @@ " mem=128M " \ " " CONFIG_MTDPARTS_DEFAULT -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "updateb=" \ "onenand erase 0x0 0x40000;" \ "onenand write 0x32008000 0x0 0x40000\0" \ @@ -94,7 +94,7 @@ * Ethernet Contoller driver */ #ifdef CONFIG_CMD_NET -#define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/ +#define CFG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/ #endif /* CONFIG_CMD_NET */ #endif /* __CONFIG_H */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index af0c8200fc2..f0604195ad9 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -34,15 +34,9 @@ /* FLASH and environment organization */ -/* MIU (Memory Interleaving Unit) */ -#define CONFIG_MIU_2BIT_INTERLEAVED - -#define RESERVE_BLOCK_SIZE (512) -#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ - /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET -#define CONFIG_ENV_SROM_BANK 1 +#define CFG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/ #endif /* __CONFIG_H */ diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index 14f9cf56028..11031744bef 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -17,7 +17,7 @@ /* MMC Config*/ #define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ "console=ttymxc0\0" \ "fdtfile=imx7d-smegw01.dtb\0" \ diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index b7aa49ce435..df8ed451a43 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -41,7 +41,7 @@ /* Environment settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "ethaddr=00:00:00:00:00:00\0" \ "serial=0\0" \ "stdout=serial_atmel\0" \ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index afca7e18e9b..45a3102aeee 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -38,7 +38,7 @@ * I2C */ -#define CONFIG_I2C_MULTI_BUS +#define CFG_I2C_MULTI_BUS /* * Input @@ -62,7 +62,7 @@ * Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x82000000\0" \ "loadaddr=0x82000000\0" \ "fdt_addr_r=0x88000000\0" \ diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 29b4b22b398..55168c2fb8f 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -7,7 +7,6 @@ #define __CONFIG_SOCFPGA_SECU1_H__ #include <asm/arch/base_addr_ac5.h> -#include <linux/stringify.h> /* Eternal oscillator */ #define CFG_SYS_TIMER_RATE 40000000 @@ -23,58 +22,6 @@ */ #define CFG_SYS_I2C_RTC_ADDR 0x68 -/* Environment settings */ - -/* - * FPGA Remote Update related environment - * - * Note that since those commands access the FPGA, the HPS-to-FPGA - * bridges MUST have been previously enabled (for example - * with 'bridge enable'). - */ -#define FPGA_RMTU_ENV \ - "rmtu_page=0xFF29000C\0" \ - "rmtu_reconfig=0xFF290018\0" \ - "fpga_safebase=0x0\0" \ - "fpga_userbase=0x2000000\0" \ - "_fpga_loaduser=echo Loading FPGA USER image..." \ - " && mw ${rmtu_page} ${fpga_userbase} && mw ${rmtu_reconfig} 1\0" \ - "_fpga_loadsafe=echo Loading FPGA SAFE image..." \ - " && mw ${rmtu_page} ${fpga_safebase} && mw ${rmtu_reconfig} 1\0" \ - -#define CONFIG_KM_NEW_ENV \ - "newenv=" \ - "nand erase 0x100000 0x40000\0" - -#define CONFIG_KM_DEF_ENV_BOOTTARGETS \ - "release=" \ - "run newenv; reset\0" \ - "develop=" \ - "tftp 0x200000 scripts/develop-secu.txt && env import -t 0x200000 ${filesize} && saveenv && reset\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - FPGA_RMTU_ENV \ - CONFIG_KM_DEF_ENV_BOOTTARGETS \ - CONFIG_KM_NEW_ENV \ - "socfpga_legacy_reset_compat=1\0" \ - "altbootcmd=run bootcmd;\0" \ - "bootlimit=6\0" \ - "bootnum=1\0" \ - "bootretry=" __stringify(CONFIG_BOOT_RETRY_TIME) "\0" \ - "fdt_addr=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ - "load=tftpboot ${loadaddr} u-boot-with-nand-spl.sfp\0" \ - "loadaddr=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0" \ - "update=nand erase 0x0 0x00100000 && nand write ${loadaddr} 0x0 ${filesize}\0" \ - "userload=ubi part nand.ubi &&" \ - "ubi check rootfs$bootnum &&" \ - "ubi read $fdt_addr dtb$bootnum &&" \ - "ubi read $loadaddr kernel$bootnum\0" \ - "userboot=setenv bootargs " CONFIG_BOOTARGS \ - " ubi.mtd=1 ubi.block=0,rootfs$bootnum root=/dev/ubiblock0_$ubivolid" \ - " ro rootfstype=squashfs init=sbin/preinit;" \ - "bootz ${loadaddr} - ${fdt_addr}\0" \ - "verify=y\0" - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_chameleonv3.h b/include/configs/socfpga_chameleonv3.h index aa13878177e..2ce7011529a 100644 --- a/include/configs/socfpga_chameleonv3.h +++ b/include/configs/socfpga_chameleonv3.h @@ -19,7 +19,7 @@ */ #define CFG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "autoload=no\0" \ "bootargs=cma=256M console=ttyS1,115200 root=/dev/mmcblk0p3 rw rootwait\0" \ "distro_bootcmd=bridge enable; run bootcmd_mmc\0" \ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index bbbdea6664c..0c96c9c24fe 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -64,7 +64,7 @@ /* * L4 Watchdog */ -#define CONFIG_DW_WDT_CLOCK_KHZ 25000 +#define CFG_DW_WDT_CLOCK_KHZ 25000 /* * NAND Support @@ -83,10 +83,6 @@ */ #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define DFU_DEFAULT_POLL_TIMEOUT 300 - -/* USB IDs */ -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 #endif /* @@ -148,8 +144,8 @@ #include <config_distro_bootcmd.h> -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "bootm_size=0xa000000\0" \ "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ diff --git a/include/configs/socfpga_dbm_soc1.h b/include/configs/socfpga_dbm_soc1.h index 8f1c2de998e..565a661258f 100644 --- a/include/configs/socfpga_dbm_soc1.h +++ b/include/configs/socfpga_dbm_soc1.h @@ -13,7 +13,7 @@ /* Environment is in MMC */ /* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "consdev=ttyS0\0" \ "baudrate=115200\0" \ "bootscript=boot.scr\0" \ diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index e76438e228d..ac70d91e208 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -13,7 +13,7 @@ /* Environment is in MMC */ /* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "consdev=ttyS0\0" \ "baudrate=115200\0" \ "bootscript=boot.scr\0" \ diff --git a/include/configs/socfpga_n5x_socdk.h b/include/configs/socfpga_n5x_socdk.h index c295e91e3d3..fe5286e12cd 100644 --- a/include/configs/socfpga_n5x_socdk.h +++ b/include/configs/socfpga_n5x_socdk.h @@ -9,8 +9,8 @@ #include <configs/socfpga_soc64_common.h> -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "bootfile=" CONFIG_BOOTFILE "\0" \ "fdt_addr=1100000\0" \ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 47089f312d2..66ecb168a0a 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -36,7 +36,7 @@ /* * Environment variable */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "bootfile=" CONFIG_BOOTFILE "\0" \ "fdt_addr=8000000\0" \ @@ -90,10 +90,10 @@ #ifdef CONFIG_TARGET_SOCFPGA_STRATIX10 #ifndef __ASSEMBLY__ unsigned int cm_get_l4_sys_free_clk_hz(void); -#define CONFIG_DW_WDT_CLOCK_KHZ (cm_get_l4_sys_free_clk_hz() / 1000) +#define CFG_DW_WDT_CLOCK_KHZ (cm_get_l4_sys_free_clk_hz() / 1000) #endif #else -#define CONFIG_DW_WDT_CLOCK_KHZ 100000 +#define CFG_DW_WDT_CLOCK_KHZ 100000 #endif /* diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index 432144cb40c..caff0cf2523 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -11,15 +11,9 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ /* Ethernet on SoC (EMAC) */ -#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII /* The PHY is autodetected, so no MII PHY address is needed here */ #define PHY_ANEG_TIMEOUT 8000 -/* Enable SPI NOR flash reset, needed for SPI booting */ -#define CONFIG_SPI_N25Q256A_RESET - -/* Environment setting for SPI flash */ - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 70d9f3607a6..4bb15cf4629 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -13,7 +13,6 @@ /* Booting Linux */ /* Extra Environment */ -#define CONFIG_HOSTNAME "socfpga_vining_fpga" /* * Active LOW GPIO buttons: @@ -28,7 +27,7 @@ * Linux system after 5 seconds */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "verify=n\0" \ "consdev=ttyS0\0" \ "baudrate=115200\0" \ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 95393d3ab25..2b35be83ec6 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -16,9 +16,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_SOCRATES 1 - /* * Only possible on E500 Version 2 or newer cores. */ @@ -37,11 +34,6 @@ * in the README.mpc85xxads. */ -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ - #define CFG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ #undef CFG_SYS_DRAM_TEST /* memory test, takes time */ @@ -50,12 +42,8 @@ #define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR /* DDR Setup */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */ @@ -111,22 +99,6 @@ #define CFG_SYS_PCI1_MEM_PHYS 0x80000000 #define CFG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC - -#define TSEC1_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 1 - -#define TSEC1_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS TSEC_GIGABIT - -/* Options are: TSEC[0,1] */ - /* * Miscellaneous configurable options */ @@ -139,7 +111,7 @@ #define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consdev=ttyS0\0" \ "uboot_file=/home/tftp/syscon3/u-boot.bin\0" \ diff --git a/include/configs/som-db5800-som-6867.h b/include/configs/som-db5800-som-6867.h index ee038d83bc0..b2e7aa1514c 100644 --- a/include/configs/som-db5800-som-6867.h +++ b/include/configs/som-db5800-som-6867.h @@ -12,11 +12,10 @@ #include <configs/x86-common.h> -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,usbkbd\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial,usbkbd\0" \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO #endif /* __CONFIG_H */ diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h index de0f48b79a1..041a83b057d 100644 --- a/include/configs/somlabs_visionsom_6ull.h +++ b/include/configs/somlabs_visionsom_6ull.h @@ -20,7 +20,7 @@ #define CFG_SYS_FSL_USDHC_NUM 1 #endif /* CONFIG_FSL_USDHC */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "console=ttymxc0\0" \ "initrd_addr=0x86800000\0" \ @@ -61,12 +61,12 @@ /* USB Configs */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #endif #ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC_PHYADDR 0x1 +#define CFG_FEC_MXC_PHYADDR 0x1 #endif #endif diff --git a/include/configs/stemmy.h b/include/configs/stemmy.h index a5987c5e17a..e58ddd752cd 100644 --- a/include/configs/stemmy.h +++ b/include/configs/stemmy.h @@ -38,7 +38,7 @@ #define BOOTCMD_ENV \ "fastbootcmd=echo '*** FASTBOOT MODE ***'; fastboot usb 0\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOT_ENV \ CONSOLE_ENV \ FASTBOOT_ENV \ diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h index 9294d57ca84..b3fce503168 100644 --- a/include/configs/stih410-b2260.h +++ b/include/configs/stih410-b2260.h @@ -29,7 +29,7 @@ func(USB, usb, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x40000000\0" \ "fdtfile=stih410-b2260.dtb\0" \ "fdt_addr_r=0x47000000\0" \ diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index afd7d50428b..de5019a364a 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -15,7 +15,7 @@ #define CFG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ "bootm 0x08044000 - 0x08042000\0" diff --git a/include/configs/stm32f429-evaluation.h b/include/configs/stm32f429-evaluation.h index c8aad47966f..a4f3e43dc5a 100644 --- a/include/configs/stm32f429-evaluation.h +++ b/include/configs/stm32f429-evaluation.h @@ -24,7 +24,7 @@ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x00008000\0" \ "fdtfile=stm32429i-eval.dtb\0" \ "fdt_addr_r=0x00408000\0" \ diff --git a/include/configs/stm32f469-discovery.h b/include/configs/stm32f469-discovery.h index 573a6b17956..62a7e9af0c5 100644 --- a/include/configs/stm32f469-discovery.h +++ b/include/configs/stm32f469-discovery.h @@ -24,7 +24,7 @@ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x00008000\0" \ "fdtfile=stm32f469-disco.dtb\0" \ "fdt_addr_r=0x00408000\0" \ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index 14e883a3589..34856d30040 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -24,7 +24,7 @@ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0xC0008000\0" \ "fdtfile="CONFIG_DEFAULT_DEVICE_TREE".dtb\0" \ "fdt_addr_r=0xC0408000\0" \ diff --git a/include/configs/stm32h743-disco.h b/include/configs/stm32h743-disco.h index 67e6a3a19d2..d36cd6fdd44 100644 --- a/include/configs/stm32h743-disco.h +++ b/include/configs/stm32h743-disco.h @@ -21,7 +21,7 @@ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0xD0008000\0" \ "fdtfile=stm32h743i-disco.dtb\0" \ "fdt_addr_r=0xD0408000\0" \ diff --git a/include/configs/stm32h743-eval.h b/include/configs/stm32h743-eval.h index 4786eb001bc..8f242bf0ff6 100644 --- a/include/configs/stm32h743-eval.h +++ b/include/configs/stm32h743-eval.h @@ -21,7 +21,7 @@ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0xD0008000\0" \ "fdtfile=stm32h743i-eval.dtb\0" \ "fdt_addr_r=0xD0408000\0" \ diff --git a/include/configs/stm32h750-art-pi.h b/include/configs/stm32h750-art-pi.h index e667fe6f6ac..d27b6a3d1de 100644 --- a/include/configs/stm32h750-art-pi.h +++ b/include/configs/stm32h750-art-pi.h @@ -21,7 +21,7 @@ func(MMC, mmc, 0) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0xC0008000\0" \ "fdtfile=stm32h750i-art-pi.dtb\0" \ "fdt_addr_r=0xC0408000\0" \ diff --git a/include/configs/stm32mp13_common.h b/include/configs/stm32mp13_common.h index c259a616133..7c59c69e0bd 100644 --- a/include/configs/stm32mp13_common.h +++ b/include/configs/stm32mp13_common.h @@ -81,7 +81,7 @@ "fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \ "ramdisk_addr_r=" __RAMDISK_ADDR_R "\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ STM32MP_MEM_LAYOUT \ STM32MP_BOOTCMD \ BOOTENV \ diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index c9cfadd9ce0..7db72a19ed9 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -24,9 +24,6 @@ /* NAND support */ /* Ethernet need */ -#ifdef CONFIG_DWC_ETH_QOS -#define CONFIG_SERVERIP 192.168.1.1 -#endif #define STM32MP_FIP_IMAGE_GUID \ EFI_GUID(0x19d5df83, 0x11b0, 0x457b, 0xbe, 0x2c, \ @@ -138,7 +135,7 @@ "fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \ "ramdisk_addr_r=" __RAMDISK_ADDR_R "\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ STM32MP_MEM_LAYOUT \ STM32MP_BOOTCMD \ STM32MP_PARTS_DEFAULT \ diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index 910d7ef107b..91921690624 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -12,7 +12,7 @@ #define PHY_ANEG_TIMEOUT 20000 #ifdef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "dfu_alt_info_ram=u-boot.itb ram " \ __stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \ " 0x800000\0" diff --git a/include/configs/stm32mp15_st_common.h b/include/configs/stm32mp15_st_common.h index 38b5aa7319c..d0cd4130cec 100644 --- a/include/configs/stm32mp15_st_common.h +++ b/include/configs/stm32mp15_st_common.h @@ -18,7 +18,7 @@ 230400, 460800, 921600, \ 1000000, 2000000 } -#ifdef CONFIG_EXTRA_ENV_SETTINGS +#ifdef CFG_EXTRA_ENV_SETTINGS /* * default bootcmd for stm32mp1 STMicroelectronics boards: * for serial/usb: execute the stm32prog command @@ -42,8 +42,8 @@ "run distro_bootcmd;" \ "fi;\0" -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ STM32MP_MEM_LAYOUT \ ST_STM32MP1_BOOTCMD \ STM32MP_PARTS_DEFAULT \ diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index faff8d6ed6d..19589be270f 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -8,14 +8,12 @@ #ifndef __STMARK2_CONFIG_H #define __STMARK2_CONFIG_H -#define CONFIG_HOSTNAME "stmark2" - #define CFG_SYS_UART_PORT 0 #define LDS_BOARD_TEXT \ board/sysam/stmark2/sbf_dram_init.o (.text*) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kern_size=0x700000\0" \ "loadaddr=0x40001000\0" \ "-(rootfs)\0" \ @@ -38,7 +36,7 @@ /* Input, PCI, Flexbus, and VCO */ -#define CONFIG_PRAM 2048 /* 2048 KB */ +#define CFG_PRAM 2048 /* 2048 KB */ #define CFG_SYS_MBAR 0xFC000000 @@ -63,10 +61,6 @@ #define CFG_SYS_DRAM_TEST -#if defined(CONFIG_CF_SBF) -#define CONFIG_SERIAL_BOOT -#endif - /* Reserve 256 kB for Monitor */ /* diff --git a/include/configs/stout.h b/include/configs/stout.h index f49e88cb17c..1278ba63f4f 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -23,22 +23,19 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SCIF */ -#define CONFIG_SCIF_A - -/* SPI */ -#define CONFIG_SPI_FLASH_QUAD +#define CFG_SCIF_A /* SH Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 0x1 -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_CACHE_WRITEBACK -#define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CFG_SH_ETHER_USE_PORT 0 +#define CFG_SH_ETHER_PHY_ADDR 0x1 +#define CFG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CFG_SH_ETHER_CACHE_WRITEBACK +#define CFG_SH_ETHER_CACHE_INVALIDATE +#define CFG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" /* SPL support */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 1677aafad03..8032abe7692 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -23,7 +23,7 @@ #else #define CFG_SYS_NS16550_CLK 24000000 #endif -#ifndef CONFIG_DM_SERIAL +#if !CONFIG_IS_ENABLED(DM_SERIAL) # define CFG_SYS_NS16550_COM1 SUNXI_UART0_BASE # define CFG_SYS_NS16550_COM2 SUNXI_UART1_BASE # define CFG_SYS_NS16550_COM3 SUNXI_UART2_BASE @@ -69,16 +69,10 @@ #define PHYS_SDRAM_0 CFG_SYS_SDRAM_BASE #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ -/* mmc config */ -#define CONFIG_MMC_SUNXI_SLOT 0 - /* * Miscellaneous configurable options */ -/* standalone support */ -#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR - /* FLASH and environment organization */ /* @@ -324,7 +318,7 @@ #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ MEM_LAYOUT_ENV_EXTRA_SETTINGS \ diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 69926890010..8f44c6f66a9 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -14,8 +14,7 @@ #define CFG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */ #define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */ -#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */ -#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE +#define CFG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE #define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */ @@ -32,8 +31,8 @@ /* Serial (pl011) */ #define UART_CLK (62500000) -#define CONFIG_PL011_CLOCK UART_CLK -#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)} +#define CFG_PL011_CLOCK UART_CLK +#define CFG_PL01x_PORTS {(void *)(0x2a400000)} /* Support MTD */ #define CFG_SYS_FLASH_BASE (0x08000000) @@ -92,7 +91,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_addr_r=0x9fe00000\0" \ "kernel_addr_r=0x90000000\0" \ "ramdisk_addr_r=0xa0000000\0" \ diff --git a/include/configs/syzygy_hub.h b/include/configs/syzygy_hub.h index 7af7b08eb48..e8a207f5416 100644 --- a/include/configs/syzygy_hub.h +++ b/include/configs/syzygy_hub.h @@ -10,7 +10,7 @@ #ifndef __CONFIG_SYZYGY_HUB_H #define __CONFIG_SYZYGY_HUB_H -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fit_image=fit.itb\0" \ "bitstream_image=download.bit\0" \ "loadbit_addr=0x1000000\0" \ diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 30f84255820..174b848e259 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -34,8 +34,8 @@ /* Misc CPU related */ -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS +#define CFG_USART_BASE ATMEL_BASE_DBGU +#define CFG_USART_ID ATMEL_ID_SYS /* * SDRAM: 1 bank, min 32, max 128 MB @@ -72,7 +72,7 @@ /* bootstrap in spi flash , u-boot + env + linux in nandflash */ #if defined(CONFIG_BOARD_AXM) -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \ "addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \ diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index fcc96749422..256331ae173 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -22,18 +22,15 @@ /* PCI */ #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) #endif /* USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#ifdef CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USBD_HS -#endif /* CONFIG_CMD_USB_MASS_STORAGE */ +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* CONFIG_CMD_USB */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \ diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 09879663701..5e49abb49fa 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -10,18 +10,11 @@ #include "tegra30-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier" +#define CFG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* Environment in eMMC, at the end of 2nd "boot sector" */ - -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/tec.h b/include/configs/tec.h index ddf753da4a9..05dd7c96f61 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -12,10 +12,9 @@ #include "tegra20-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" +#define CFG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 69acabf19fd..0fdb5a81605 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -65,7 +65,7 @@ #define INITRD_HIGH "ffffffff" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "fdt_high=" FDT_HIGH "\0" \ @@ -73,8 +73,4 @@ BOOTENV \ BOARD_EXTRA_ENV_SETTINGS -#if defined(CONFIG_TEGRA20_SFLASH) || defined(CONFIG_TEGRA20_SLINK) || defined(CONFIG_TEGRA114_SPI) -#define CONFIG_TEGRA_SPI -#endif - #endif /* __TEGRA_COMMON_POST_H */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 66cf7ae5847..bde7ffce008 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -45,7 +45,7 @@ #define CFG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ #ifndef CONFIG_ARM64 -#define CFG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE +#define CFG_SYS_INIT_RAM_ADDR CFG_STACKBASE #define CFG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN /* Defines for SPL */ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 87ec1f5a99d..ab4fa5504c5 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -15,7 +15,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_STACKBASE 0x83800000 /* 56MB */ +#define CFG_STACKBASE 0x83800000 /* 56MB */ /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h index 0485fea6ccb..b413e251212 100644 --- a/include/configs/tegra124-common.h +++ b/include/configs/tegra124-common.h @@ -17,7 +17,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_STACKBASE 0x83800000 /* 56MB */ +#define CFG_STACKBASE 0x83800000 /* 56MB */ /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 617bfb2197c..a313ac2041a 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -16,7 +16,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_STACKBASE 0x03800000 /* 56MB */ +#define CFG_STACKBASE 0x03800000 /* 56MB */ /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 04fcf11ed82..c57d2d157e3 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -16,7 +16,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_STACKBASE 0x83800000 /* 56MB */ +#define CFG_STACKBASE 0x83800000 /* 56MB */ /* * Memory layout for where various images get loaded by boot scripts: diff --git a/include/configs/ten64.h b/include/configs/ten64.h index 57724719a9d..e86c1631329 100644 --- a/include/configs/ten64.h +++ b/include/configs/ten64.h @@ -34,9 +34,9 @@ func(PXE, pxe, 0) #include <config_distro_bootcmd.h> -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "BOARD=ten64\0" \ "fdt_addr_r=0x90000000\0" \ "fdt_high=0xa0000000\0" \ diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h index af0a095dfc8..b23b8783076 100644 --- a/include/configs/theadorable-x86-common.h +++ b/include/configs/theadorable-x86-common.h @@ -11,18 +11,17 @@ #ifndef __THEADORABLE_X86_COMMON_H #define __THEADORABLE_X86_COMMON_H -#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO /* Environment settings */ -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "tftpdir=" DEF_ENV_TFTPDIR "\0" \ "eth_init=" DEF_ENV_ETH_INIT "\0" \ "ubuntu_part=" __stringify(DEF_ENV_UBUNTU_PART) "\0" \ diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 76b496303f3..2ce92845f1c 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -25,8 +25,8 @@ */ /* I2C */ -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE -#define CONFIG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE +#define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CFG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE /* USB/EHCI configuration */ @@ -35,7 +35,7 @@ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ /* Keep device tree and initrd in lower memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" diff --git a/include/configs/thuban.h b/include/configs/thuban.h index 696306e4659..a5913e1e7d2 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -19,26 +19,26 @@ #define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */ #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ -#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ +#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ "button_dfu0=27\0" \ "led0=103,1,0\0" \ "led1=64,0,1\0" /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ +#define CFG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ #define EEPROM_ADDR_DDR3 0x90 #define EEPROM_ADDR_CHIP 0x120 /* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "hostname=thuban\0" \ "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ - CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - CONFIG_ENV_SETTINGS_V2 \ - CONFIG_ENV_SETTINGS_NAND_V2 + CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CFG_ENV_SETTINGS_V2 \ + CFG_ENV_SETTINGS_NAND_V2 #endif /* ! __CONFIG_THUBAN_H */ diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 7becf1eb7cb..2bca86bed93 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -17,7 +17,7 @@ /* PL011 Serial Configuration */ -#define CONFIG_PL011_CLOCK 24000000 +#define CFG_PL011_CLOCK 24000000 /* Generic Interrupt Controller Definitions */ #define GICD_BASE (0x801000000000) @@ -35,7 +35,7 @@ /* Initial environment variables */ #define UBOOT_IMG_HEAD_SIZE 0x40 /* C80000 - 0x40 */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr=08007ffc0\0" \ "fdt_addr=0x94C00000\0" \ "fdt_high=0x9fffffff\0" diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h deleted file mode 100644 index 03849adb5ab..00000000000 --- a/include/configs/ti814x_evm.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * ti814x_evm.h - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_TI814X_EVM_H -#define __CONFIG_TI814X_EVM_H - -#include <asm/arch/omap.h> - -/* commands to include */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "rdaddr=0x81000000\0" \ - "bootfile=/boot/uImage\0" \ - "fdtfile=\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 ro\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ - "ramrootfstype=ext2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ - "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootm ${loadaddr}\0" \ - "fdtfile=ti814x-evm.dtb\0" \ - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - - -/* Console I/O Buffer Size */ - -/** - * Physical Memory Map - */ -#define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */ - -#define CFG_SYS_SDRAM_BASE 0x80000000 - -/** - * Platform/Board specific defs - */ -#define CFG_SYS_TIMERBASE 0x4802E000 - -/* NS16550 Configuration */ -#define CFG_SYS_NS16550_CLK (48000000) -#define CFG_SYS_NS16550_COM1 0x48020000 /* Base EVM has UART0 */ - -/* CPU */ - -/* Defines for SPL */ - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80800000 should not be used for any - * other needs. - */ - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ - -/* Ethernet */ -#define CONFIG_PHY_ET1011C_TX_CLK_FIX - -#endif /* ! __CONFIG_TI814X_EVM_H */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 7b04292d218..ac6d46f917b 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -12,14 +12,14 @@ #include <configs/ti_armv7_omap.h> #include <asm/arch/omap.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ +#define CFG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ #define CFG_SYS_SDRAM_BASE 0x80000000 /** diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index ed17b429209..20f8643771d 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -11,7 +11,7 @@ #ifndef __CONFIG_TI_AM335X_COMMON_H__ #define __CONFIG_TI_AM335X_COMMON_H__ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ +#define CFG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ #define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include <asm/arch/omap.h> diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index ea45bba409c..a47f0902a26 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -15,7 +15,7 @@ /* Memory Configuration */ #define CFG_SYS_LPAE_SDRAM_BASE 0x800000000 -#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ +#define CFG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ #ifdef CONFIG_SYS_MALLOC_F_LEN #define SPL_MALLOC_F_SIZE CONFIG_SYS_MALLOC_F_LEN @@ -47,11 +47,11 @@ #define CFG_SYS_SPI_CLK ks_clk_get_rate(KS2_CLK1_6) /* Keystone net */ -#define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR -#define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE -#define CONFIG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE -#define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE -#define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES +#define CFG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR +#define CFG_KSNET_NETCP_BASE KS2_NETCP_BASE +#define CFG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE +#define CFG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE +#define CFG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES /* EEPROM definitions */ @@ -106,7 +106,7 @@ "rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; " \ "rproc start ${dev_pmmc}\0" \ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ ENV_KS2_BOARD_SETTINGS \ DFUARGS \ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 64ec59d78eb..9e312ac16d1 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -28,7 +28,7 @@ * Hardware drivers */ #define CFG_SYS_NS16550_CLK 48000000 -#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL) +#if !CONFIG_IS_ENABLED(DM_SERIAL) #define CFG_SYS_NS16550_COM3 UART3_BASE #endif @@ -58,7 +58,7 @@ #include <config_distro_bootcmd.h> #include <environment/ti/mmc.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ DEFAULT_FIT_TI_ARGS \ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 37ab2e44672..74a39c40785 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -247,7 +247,7 @@ #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ DEFAULT_FIT_TI_ARGS \ @@ -279,7 +279,7 @@ * firewall violation, we tell u-boot that memory is protected RAM (PRAM) */ #if (CONFIG_TI_SECURE_EMIF_REGION_START == 0) -#define CONFIG_PRAM (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE) >> 10 +#define CFG_PRAM (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE) >> 10 #endif #else /* diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 83abaeddf12..3795e6152fa 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -44,8 +44,8 @@ # define EXTRA_ENV_USB #endif -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_image=uImage\0" \ "kernel_addr=0x2080000\0" \ "ramdisk_image=uramdisk.image.gz\0" \ diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h index 0f28690612a..436bf622e17 100644 --- a/include/configs/total_compute.h +++ b/include/configs/total_compute.h @@ -14,7 +14,7 @@ #define UART0_BASE 0x7ff80000 /* PL011 Serial Configuration */ -#define CONFIG_PL011_CLOCK 7372800 +#define CFG_PL011_CLOCK 7372800 /* Miscellaneous configurable options */ @@ -28,7 +28,7 @@ #define PHYS_SDRAM_2 0x8080000000 #define PHYS_SDRAM_2_SIZE 0x180000000 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootm_size=0x20000000\0" \ "load_addr=0xa0000000\0" \ "kernel_addr_r=0x80080000\0" \ diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 7a1ad9544a3..8c75a75a9e5 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -28,10 +28,10 @@ #define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K /* I2C Configs */ -#define CONFIG_I2C_MULTI_BUS +#define CFG_I2C_MULTI_BUS #if !defined(CONFIG_DM_PMIC) -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 #define TQMA6_PFUZE100_I2C_BUS 2 #endif @@ -39,7 +39,7 @@ #define CFG_SYS_FSL_ESDHC_ADDR 0 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #if defined(CONFIG_TQMA6X_MMC_BOOT) @@ -197,7 +197,7 @@ /* set to a resonable value, changeable by user */ #define TQMA6_CMA_SIZE 160M -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "board=tqma6\0" \ "uimage=uImage\0" \ "zimage=zImage\0" \ diff --git a/include/configs/tqma6_mba6.h b/include/configs/tqma6_mba6.h index 899c218727f..b5871424bc6 100644 --- a/include/configs/tqma6_mba6.h +++ b/include/configs/tqma6_mba6.h @@ -9,9 +9,9 @@ #ifndef __CONFIG_TQMA6_MBA6_H #define __CONFIG_TQMA6_MBA6_H -#define CONFIG_FEC_MXC_PHYADDR 0x03 +#define CFG_FEC_MXC_PHYADDR 0x03 -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE #define CONSOLE_DEV "ttymxc1" #endif /* __CONFIG_TQMA6_MBA6_H */ diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h index 4d8839b6e60..e06fc7fe155 100644 --- a/include/configs/tqma6_wru4.h +++ b/include/configs/tqma6_wru4.h @@ -7,10 +7,10 @@ #define __CONFIG_TQMA6_WRU4_H /* Ethernet */ -#define CONFIG_FEC_MXC_PHYADDR 0x01 +#define CFG_FEC_MXC_PHYADDR 0x01 /* UART */ -#define CONFIG_MXC_UART_BASE UART4_BASE +#define CFG_MXC_UART_BASE UART4_BASE #define CONSOLE_DEV "ttymxc3" /* Watchdog */ diff --git a/include/configs/trats.h b/include/configs/trats.h index ec18842bbe8..2067327918a 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -39,7 +39,7 @@ "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ -#define CONFIG_DFU_ALT \ +#define CFG_DFU_ALT \ "u-boot raw 0x80 0x400;" \ "/uImage ext4 0 2;" \ "/modem.bin ext4 0 2;" \ @@ -54,7 +54,7 @@ "params.bin raw 0x38 0x8;" \ "/Image.itb ext4 0 2\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootk=" \ "run loaduimage;" \ "if run loaddtb; then " \ @@ -98,7 +98,7 @@ "mmcrootpart=5\0" \ "opts=always_resume=1\0" \ "partitions=" PARTS_DEFAULT \ - "dfu_alt_info=" CONFIG_DFU_ALT \ + "dfu_alt_info=" CFG_DFU_ALT \ "spladdr=0x40000100\0" \ "splsize=0x200\0" \ "splfile=falcon.bin\0" \ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 0aa331e3935..9925531aba4 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -40,7 +40,7 @@ "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ -#define CONFIG_DFU_ALT \ +#define CFG_DFU_ALT \ "u-boot raw 0x80 0x800;" \ "/uImage ext4 0 2;" \ "/modem.bin ext4 0 2;" \ @@ -55,7 +55,7 @@ "params.bin raw 0x38 0x8;" \ "/Image.itb ext4 0 2\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootk=" \ "run loaduimage;" \ "if run loaddtb; then " \ @@ -81,12 +81,12 @@ "${kernelname}\0" \ "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \ "${fdtfile}\0" \ - "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \ + "mmcdev=0\0" \ "mmcbootpart=2\0" \ "mmcrootpart=5\0" \ "opts=always_resume=1\0" \ "partitions=" PARTS_DEFAULT \ - "dfu_alt_info=" CONFIG_DFU_ALT \ + "dfu_alt_info=" CFG_DFU_ALT \ "uartpath=ap\0" \ "usbpath=ap\0" \ "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index e4cbc7da843..7d1ff2afd14 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -11,11 +11,9 @@ #include "tegra20-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice" +#define CFG_TEGRA_BOARD_STRING "Compulab Trimslice" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA -#define CONFIG_TEGRA_UARTA_GPU #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* SPI */ diff --git a/include/configs/tuge1.h b/include/configs/tuge1.h index d43ccbe8dd9..d6a3844bcc5 100644 --- a/include/configs/tuge1.h +++ b/include/configs/tuge1.h @@ -20,14 +20,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * High Level Configuration Options - */ -#define CONFIG_HOSTNAME "tuge1" - /* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" #include "km/km-mpc83xx.h" #include "km/km-mpc832x.h" diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h index fdb420ed874..3443c80d06e 100644 --- a/include/configs/turris_mox.h +++ b/include/configs/turris_mox.h @@ -35,7 +35,7 @@ "lzmadec 0x5000000 0x5800000 && " \ "bootm 0x5800000" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_addr=0x4c00000\0" \ "scriptaddr=0x4d00000\0" \ "pxefile_addr_r=0x4e00000\0" \ diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index 52de4cdc789..47b220ff9ee 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -80,7 +80,7 @@ "fi; " \ "bootz 0x1000000" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ RELOCATION_LIMITS_ENV_SETTINGS \ LOAD_ADDRESS_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 7eed31c35f0..d6a3844bcc5 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -20,14 +20,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * High Level Configuration Options - */ -#define CONFIG_HOSTNAME "tuxx1" - /* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" #include "km/km-mpc83xx.h" #include "km/km-mpc832x.h" diff --git a/include/configs/udoo.h b/include/configs/udoo.h index fac8c1eeb4e..d85cf7808c7 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -10,12 +10,12 @@ #include "mx6_common.h" -#define CONFIG_MXC_UART_BASE UART2_BASE +#define CFG_MXC_UART_BASE UART2_BASE /* MMC Configuration */ #define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc1,115200\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h index d4c92233aca..80386414f89 100644 --- a/include/configs/udoo_neo.h +++ b/include/configs/udoo_neo.h @@ -16,10 +16,10 @@ #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR /* Command definition */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* Linux only */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ @@ -62,7 +62,7 @@ #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* PMIC */ -#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE3000_I2C_ADDR 0x08 #define PFUZE3000_I2C_BUS 0 #endif /* __CONFIG_H */ diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index ab199bc726a..6e03375c6c3 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -13,7 +13,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 8cd81f1cddd..0a14d0448c6 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -36,8 +36,7 @@ BOOT_TARGET_DEVICE_USB(func) #if !defined(CONFIG_ARM64) -/* Time clock 1MHz */ -#define CFG_SYS_TIMER_RATE 1000000 +#define CFG_SYS_HZ_CLOCK 50000000 #endif #define CFG_SYS_NAND_REGS_BASE 0x68100000 @@ -46,10 +45,6 @@ /* * Network Configuration */ -#define CONFIG_SERVERIP 192.168.11.1 -#define CONFIG_IPADDR 192.168.11.10 -#define CONFIG_GATEWAYIP 192.168.11.1 -#define CONFIG_NETMASK 255.255.255.0 #if defined(CONFIG_ARM64) /* ARM Trusted Firmware */ @@ -62,8 +57,6 @@ "third_image=u-boot.bin\0" #endif -#define CONFIG_ROOTPATH "/nfs/root/path" - #ifdef CONFIG_FIT #define KERNEL_ADDR_R_OFFSET "0x05100000" #define LINUXBOOT_ENV_SETTINGS \ @@ -92,7 +85,7 @@ "run boot_common\0" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_addr_r_offset=0x05100000\0" \ "kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \ "ramdisk_addr_r_offset=0x06000000\0" \ diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 657dbadd339..b90e047955b 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -43,6 +43,6 @@ #endif /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ #endif diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index a2bc3cd23a5..27e61f5b8f4 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -17,18 +17,17 @@ /* U-Boot general configurations */ /* UART */ -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* SD/MMC */ #define CFG_SYS_FSL_ESDHC_ADDR 0 /* USB */ -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORT 1 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 /* Linux boot */ -#define CONFIG_HOSTNAME "usbarmory" #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0) @@ -41,7 +40,7 @@ "pxefile_addr_r=0x70800000\0" \ "ramdisk_addr_r=0x73000000\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \ "fdtfile=imx53-usbarmory.dtb\0" \ diff --git a/include/configs/vcoreiii.h b/include/configs/vcoreiii.h index b03159805c1..2e150276e7a 100644 --- a/include/configs/vcoreiii.h +++ b/include/configs/vcoreiii.h @@ -25,7 +25,7 @@ #error Unknown DDR size - please add! #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "loadaddr=0x81000000\0" \ "spi_image_off=0x00100000\0" \ "console=ttyS0,115200\0" \ diff --git a/include/configs/venice2.h b/include/configs/venice2.h index b2dc04a975a..353b5ea67c1 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -12,17 +12,13 @@ #include "tegra124-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2" +#define CFG_TEGRA_BOARD_STRING "NVIDIA Venice2" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/ventana.h b/include/configs/ventana.h index f7a507768ec..1d9c60ca7c6 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -11,10 +11,9 @@ #include "tegra20-common.h" /* High-level configuration options */ -#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana" +#define CFG_TEGRA_BOARD_STRING "NVIDIA Ventana" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 18ac6b2b089..8cb1f1aff35 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -14,7 +14,7 @@ #ifdef CONFIG_SPL_BUILD /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 +#define CFG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ #endif @@ -34,7 +34,7 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ "bootcmd_mfg=fastboot 0\0" \ @@ -67,6 +67,6 @@ #define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */ /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __VERDIN_IMX8MM_H */ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 88839a6e561..942081ab84d 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -16,12 +16,9 @@ /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x184000 +#define CFG_MALLOC_F_ADDR 0x184000 /* For RAW image gives a error info not panic */ -#define CONFIG_POWER_PCA9450 - -#define CONFIG_SYS_I2C #endif /* CONFIG_SPL_BUILD */ #define MEM_LAYOUT_ENV_SETTINGS \ @@ -46,7 +43,7 @@ #endif /* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ BOOTENV \ MEM_LAYOUT_ENV_SETTINGS \ "bootcmd_mfg=fastboot 0\0" \ diff --git a/include/configs/vexpress_aemv8.h b/include/configs/vexpress_aemv8.h index 30c1f5025b0..43f7e454d81 100644 --- a/include/configs/vexpress_aemv8.h +++ b/include/configs/vexpress_aemv8.h @@ -86,9 +86,9 @@ /* PL011 Serial Configuration */ #ifdef CONFIG_TARGET_VEXPRESS64_JUNO -#define CONFIG_PL011_CLOCK 7372800 +#define CFG_PL011_CLOCK 7372800 #else -#define CONFIG_PL011_CLOCK 24000000 +#define CFG_PL011_CLOCK 24000000 #endif /* Physical Memory Map */ @@ -244,7 +244,7 @@ #include <config_distro_bootcmd.h> /* Default load addresses and names for the different payloads. */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \ "ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \ "pxefile_addr_r=" __stringify(VEXPRESS_PXEFILE_ADDR) "\0" \ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index e8b6acf8b8f..ba7731bfca6 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -116,8 +116,8 @@ #define CFG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4) /* PL011 Serial Configuration */ -#define CONFIG_PL011_CLOCK 24000000 -#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ +#define CFG_PL011_CLOCK 24000000 +#define CFG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ (void *)CFG_SYS_SERIAL1} #define CFG_SYS_SERIAL0 V2M_UART0 @@ -145,7 +145,7 @@ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x60100000\0" \ "fdt_addr_r=0x60000000\0" \ "bootargs=console=tty0 console=ttyAMA0,38400n8\0" \ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 14e6b2bac91..d10b88f1575 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -21,7 +21,7 @@ #define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_FEC_MXC_PHYADDR 0 +#define CFG_FEC_MXC_PHYADDR 0 /* I2C Configs */ @@ -44,7 +44,7 @@ "rdaddr=0x84080000\0" \ "ramdisk_addr_r=0x84080000\0" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 9f72bdde816..68c56df5435 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -17,8 +17,8 @@ /* The value in the common file is too far away for the VInCo platform */ /* serial console */ -#define CONFIG_USART_BASE 0xfc00c000 -#define CONFIG_USART_ID 30 +#define CFG_USART_BASE 0xfc00c000 +#define CFG_USART_ID 30 /* Timer */ #define CFG_SYS_TIMER_COUNTER 0xfc06863c @@ -39,16 +39,13 @@ /* USB device */ -/* Ethernet Hardware */ -#define CONFIG_MACB_SEARCH_PHY - #ifdef CONFIG_SPI_BOOT /* bootstrap + u-boot + env + linux in serial flash */ /* Use our own mapping for the VInCo platform */ /* Update the bootcommand according to our mapping for the VInCo platform */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "kernel_start=0x20000\0" \ "kernel_size=0x800000\0" \ "mmcblksize=0x200\0" \ diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index 1a71b300fc5..30654191a26 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -31,26 +31,26 @@ #define CFG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR /* PMIC */ -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#define CFG_POWER_PFUZE100_I2C_ADDR 0x08 /* Network */ -#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CFG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 #ifdef CONFIG_CMD_PCI -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6) +#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6) #endif -#define CONFIG_IMX6_PWM_PER_CLK 66000000 +#define CFG_IMX6_PWM_PER_CLK 66000000 #ifdef CONFIG_ENV_IS_IN_MMC /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */ #endif #ifdef CONFIG_SPL_BUILD -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE #endif #endif /* __CONFIG_H */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 6923009d459..7b8c5cbe7a8 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -10,17 +10,17 @@ #include "mx6_common.h" -#define CONFIG_MXC_UART_BASE UART1_BASE +#define CFG_MXC_UART_BASE UART1_BASE /* MMC Configuration */ #define CFG_SYS_FSL_USDHC_NUM 2 #define CFG_SYS_FSL_ESDHC_ADDR 0 /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "console=ttymxc0\0" \ "splashpos=m,m\0" \ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 56c90aa1032..5d2956a5963 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -16,7 +16,7 @@ /* MMC Config*/ #define CFG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR -#define CONFIG_DFU_ENV_SETTINGS \ +#define CFG_DFU_ENV_SETTINGS \ "dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \ /* When booting with FIT specify the node entry containing boot.scr */ @@ -26,8 +26,8 @@ #define BOOT_SCR_STRING "source ${bootscriptaddr}\0" #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_DFU_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ + CFG_DFU_ENV_SETTINGS \ "script=boot.scr\0" \ "bootscr_fitimage_name=bootscr\0" \ "script_signed=boot.scr.imx-signed\0" \ @@ -93,9 +93,7 @@ #define CFG_SYS_FSL_USDHC_NUM 1 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) - -#define CONFIG_USBD_HS +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) /* USB Device Firmware Update support */ #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index 010da1531ff..f1a7853a80e 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -27,13 +27,13 @@ * NAND chip timings for FIXME: which one? */ -#define CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY 333333333 -#define CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY 10000000 -#define CONFIG_LPC32XX_NAND_MLC_NAND_TA 18181818 -#define CONFIG_LPC32XX_NAND_MLC_RD_HIGH 31250000 -#define CONFIG_LPC32XX_NAND_MLC_RD_LOW 45454545 -#define CONFIG_LPC32XX_NAND_MLC_WR_HIGH 40000000 -#define CONFIG_LPC32XX_NAND_MLC_WR_LOW 83333333 +#define CFG_LPC32XX_NAND_MLC_TCEA_DELAY 333333333 +#define CFG_LPC32XX_NAND_MLC_BUSY_DELAY 10000000 +#define CFG_LPC32XX_NAND_MLC_NAND_TA 18181818 +#define CFG_LPC32XX_NAND_MLC_RD_HIGH 31250000 +#define CFG_LPC32XX_NAND_MLC_RD_LOW 45454545 +#define CFG_LPC32XX_NAND_MLC_WR_HIGH 40000000 +#define CFG_LPC32XX_NAND_MLC_WR_LOW 83333333 /* * NAND diff --git a/include/configs/x530.h b/include/configs/x530.h index dee87cb7732..e1678e79e49 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -14,7 +14,7 @@ * NS16550 Configuration */ #define CFG_SYS_NS16550_CLK CFG_SYS_TCLK -#if !defined(CONFIG_DM_SERIAL) +#if !CONFIG_IS_ENABLED(DM_SERIAL) #define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE #endif @@ -32,8 +32,6 @@ /* SPI NOR flash default params, used by sf commands */ -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)" #define MTDPARTS_MTDOOPS "errlog" /* Partition support */ @@ -49,11 +47,8 @@ #include <asm/arch/config.h> /* Keep device tree and initrd in low memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -#define CONFIG_UBI_PART user -#define CONFIG_UBIFS_VOLUME user - #endif /* _CONFIG_X530_H */ diff --git a/include/configs/x86-chromebook.h b/include/configs/x86-chromebook.h index ec87eddd4c7..98abb00927a 100644 --- a/include/configs/x86-chromebook.h +++ b/include/configs/x86-chromebook.h @@ -6,14 +6,13 @@ #ifndef _X86_CHROMEBOOK_H #define _X86_CHROMEBOOK_H -#define CONFIG_X86_MRC_ADDR 0xfffa0000 -#define CONFIG_X86_REFCODE_ADDR 0xffea0000 -#define CONFIG_X86_REFCODE_RUN_ADDR 0 +#define CFG_X86_MRC_ADDR 0xfffa0000 +#define CFG_X86_REFCODE_ADDR 0xffea0000 +#define CFG_X86_REFCODE_RUN_ADDR 0 #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO -#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ +#define CFG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 3e17b53dde2..c1c5a09a35c 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -10,22 +10,6 @@ #ifndef __CONFIG_X86_COMMON_H #define __CONFIG_X86_COMMON_H -/* - * High Level Configuration Options - * (easy to change) - */ - -/* Generic TPM interfaced through LPC bus */ -#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 - -/*----------------------------------------------------------------------- - * Serial Configuration - */ - -/* - * Miscellaneous configurable options - */ - /*----------------------------------------------------------------------- * CPU Features */ @@ -41,13 +25,11 @@ */ /* Default environment */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_HOSTNAME "x86" -#define CONFIG_RAMDISK_ADDR 0x4000000 +#define CFG_RAMDISK_ADDR 0x4000000 #if defined(CONFIG_GENERATE_ACPI_TABLE) || defined(CONFIG_EFI_STUB) -#define CONFIG_OTHBOOTARGS "othbootargs=\0" +#define CFG_OTHBOOTARGS "othbootargs=\0" #else -#define CONFIG_OTHBOOTARGS "othbootargs=acpi=off\0" +#define CFG_OTHBOOTARGS "othbootargs=acpi=off\0" #endif #if defined(CONFIG_DISTRO_DEFAULTS) @@ -60,14 +42,14 @@ #define SPLASH_SETTINGS #endif -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ DISTRO_BOOTENV \ - CONFIG_STD_DEVICES_SETTINGS \ + CFG_STD_DEVICES_SETTINGS \ SPLASH_SETTINGS \ "pciconfighost=1\0" \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ - CONFIG_OTHBOOTARGS \ + CFG_OTHBOOTARGS \ "scriptaddr=0x7000000\0" \ "kernel_addr_r=0x1000000\0" \ "ramdisk_addr_r=0x4000000\0" \ diff --git a/include/configs/xea.h b/include/configs/xea.h index b432ab2dc8e..04ca5aa12ac 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -26,9 +26,8 @@ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Extra Environment */ -#define CONFIG_HOSTNAME "xea" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "bootmode=update\0" \ "bootpri=mmc_mmc\0" \ "bootsec=sf_swu\0" \ diff --git a/include/configs/xenguest_arm64.h b/include/configs/xenguest_arm64.h index 612436aeb48..bc268d25dc3 100644 --- a/include/configs/xenguest_arm64.h +++ b/include/configs/xenguest_arm64.h @@ -9,12 +9,12 @@ #include <linux/types.h> #endif -#define CONFIG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS #undef CFG_SYS_SDRAM_BASE -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "loadimage=ext4load pvblock 0 0x90000000 /boot/Image;\0" \ "pvblockboot=run loadimage;" \ "booti 0x90000000 - 0x88000000;\0" diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index ee3130ed327..e70acd93bac 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -25,7 +25,6 @@ #if defined(CONFIG_CMD_DFU) #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_THOR_RESET_OFF #endif /* Ethernet driver */ @@ -127,8 +126,8 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV #endif diff --git a/include/configs/xilinx_versal_mini.h b/include/configs/xilinx_versal_mini.h index e1f95de3c34..23655a47522 100644 --- a/include/configs/xilinx_versal_mini.h +++ b/include/configs/xilinx_versal_mini.h @@ -10,11 +10,11 @@ #ifndef __CONFIG_VERSAL_MINI_H #define __CONFIG_VERSAL_MINI_H -#define CONFIG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS #include <configs/xilinx_versal.h> /* Undef unneeded configs */ -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS #endif /* __CONFIG_VERSAL_MINI_H */ diff --git a/include/configs/xilinx_versal_net.h b/include/configs/xilinx_versal_net.h index 7d77189693e..424ead038e3 100644 --- a/include/configs/xilinx_versal_net.h +++ b/include/configs/xilinx_versal_net.h @@ -25,7 +25,6 @@ #if defined(CONFIG_CMD_DFU) #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_THOR_RESET_OFF #define DFU_ALT_INFO_RAM \ "dfu_ram_info=" \ "setenv dfu_alt_info " \ @@ -124,8 +123,8 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV \ DFU_ALT_INFO diff --git a/include/configs/xilinx_versal_net_mini.h b/include/configs/xilinx_versal_net_mini.h index 1939832a848..50bacc39ac5 100644 --- a/include/configs/xilinx_versal_net_mini.h +++ b/include/configs/xilinx_versal_net_mini.h @@ -11,11 +11,11 @@ #ifndef __CONFIG_VERSAL_NET_MINI_H #define __CONFIG_VERSAL_NET_MINI_H -#define CONFIG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS #include <configs/xilinx_versal_net.h> /* Undef unneeded configs */ -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS #endif /* __CONFIG_VERSAL_NET_MINI_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index efe241df97e..011f0034c50 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -31,7 +31,6 @@ #if defined(CONFIG_ZYNQMP_USB) #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_THOR_RESET_OFF # define PARTS_DEFAULT \ "partitions=uuid_disk=${uuid_gpt_disk};" \ @@ -174,16 +173,16 @@ #include <config_distro_bootcmd.h> /* Initial environment variables */ -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV #endif /* SPL can't handle all huge variables - define just DFU */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) -#undef CONFIG_EXTRA_ENV_SETTINGS -# define CONFIG_EXTRA_ENV_SETTINGS \ +#undef CFG_EXTRA_ENV_SETTINGS +# define CFG_EXTRA_ENV_SETTINGS \ "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \ "atf-uboot.ub ram 0x10000000 0x1000000;" \ "Image ram 0x80000 0x3f80000;" \ diff --git a/include/configs/xilinx_zynqmp_mini.h b/include/configs/xilinx_zynqmp_mini.h index 1c0ab25c644..9af05456640 100644 --- a/include/configs/xilinx_zynqmp_mini.h +++ b/include/configs/xilinx_zynqmp_mini.h @@ -10,11 +10,11 @@ #ifndef __CONFIG_ZYNQMP_MINI_H #define __CONFIG_ZYNQMP_MINI_H -#define CONFIG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS #include <configs/xilinx_zynqmp.h> /* Undef unneeded configs */ -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS #endif /* __CONFIG_ZYNQMP_MINI_H */ diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h index 3a7b7e03d6a..918aa3d7402 100644 --- a/include/configs/xilinx_zynqmp_r5.h +++ b/include/configs/xilinx_zynqmp_r5.h @@ -6,7 +6,7 @@ #ifndef __CONFIG_ZYNQMP_R5_H #define __CONFIG_ZYNQMP_R5_H -#define CONFIG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS /* Serial drivers */ /* The following table includes the supported baudrates */ diff --git a/include/configs/xpress.h b/include/configs/xpress.h index 3e604894ad4..a2aa31008ec 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -10,7 +10,7 @@ #include "mx6_common.h" #include <asm/mach-imx/gpio.h> -#define CONFIG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR +#define CFG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR @@ -28,16 +28,13 @@ /* Environment is in stored in the eMMC boot partition */ /* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 -#define CONFIG_FEC_ENET_DEV 0 -#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CFG_FEC_ENET_DEV 0 +#define CFG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_UBOOT_SECTOR_START 0x2 -#define CONFIG_UBOOT_SECTOR_COUNT 0x3fe - -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc6\0" \ @@ -75,8 +72,8 @@ "bootz; " \ "fi;\0" \ "uboot=ccv/u-boot.imx\0" \ - "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \ - "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \ + "uboot_start=0x2\0" \ + "uboot_size=0x3fe\0" \ "update_uboot=if tftp ${uboot}; then " \ "if itest ${filesize} > 0; then " \ "mmc dev 0 1;" \ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 9201dac7abc..9655b666eda 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -27,7 +27,7 @@ #else #define CFG_SYS_MEMORY_BASE 0x60000000 #define CFG_SYS_IO_BASE 0x90000000 -#define CONFIG_MAX_MEM_MAPPED 0x10000000 +#define CFG_MAX_MEM_MAPPED 0x10000000 #endif /* Onboard RAM sizes: @@ -53,26 +53,10 @@ /* Memory test is destructive so default must not overlap vectors or U-Boot*/ -/* Load address for stand-alone applications. - * MEMADDR cannot be used here, because the definition needs to be - * a plain number as it's used as -Ttext argument for ld in standalone - * example makefile. - * Handle noMMU vs MMUv2 vs MMUv3 distinction here manually. - */ -#if XCHAL_HAVE_PTP_MMU -#if XCHAL_VECBASE_RESET_VADDR == XCHAL_VECBASE_RESET_PADDR -#define CONFIG_STANDALONE_LOAD_ADDR 0x00800000 -#else -#define CONFIG_STANDALONE_LOAD_ADDR 0xd0800000 -#endif -#else -#define CONFIG_STANDALONE_LOAD_ADDR 0x60800000 -#endif - -#if defined(CONFIG_MAX_MEM_MAPPED) && \ - CONFIG_MAX_MEM_MAPPED < CFG_SYS_SDRAM_SIZE +#if defined(CFG_MAX_MEM_MAPPED) && \ + CFG_MAX_MEM_MAPPED < CFG_SYS_SDRAM_SIZE #define XTENSA_SYS_TEXT_ADDR \ - (MEMADDR(CONFIG_MAX_MEM_MAPPED) - CONFIG_SYS_MONITOR_LEN) + (MEMADDR(CFG_MAX_MEM_MAPPED) - CONFIG_SYS_MONITOR_LEN) #else #define XTENSA_SYS_TEXT_ADDR \ (MEMADDR(CFG_SYS_SDRAM_SIZE) - CONFIG_SYS_MONITOR_LEN) @@ -136,7 +120,7 @@ /* Ethernet Driver Info */ /*======================*/ -#define CONFIG_ETHBASE 00:50:C2:13:6f:00 +#define CFG_ETHBASE 00:50:C2:13:6f:00 #define CFG_SYS_ETHOC_BASE IOADDR(0x0d030000) #define CFG_SYS_ETHOC_BUFFER_ADDR IOADDR(0x0D800000) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index b8c142fed37..e372e903170 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -35,13 +35,9 @@ /* Ethernet driver */ /* NOR */ -#ifdef CONFIG_MTD_NOR_FLASH -# define CONFIG_FLASH_SHOW_PROGRESS 10 -#endif #ifdef CONFIG_USB_EHCI_ZYNQ # define DFU_DEFAULT_POLL_TIMEOUT 300 -# define CONFIG_THOR_RESET_OFF #endif /* enable preboot to be loaded before CONFIG_BOOTDELAY */ @@ -174,8 +170,8 @@ #endif /* CONFIG_SPL_BUILD */ /* Default environment */ -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifndef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ "scriptaddr=0x20000\0" \ "script_size_f=0x40000\0" \ "fdt_addr_r=0x1f00000\0" \ diff --git a/include/configs/zynq_cse.h b/include/configs/zynq_cse.h index ac6e8c4ff86..a9bb5bb90ad 100644 --- a/include/configs/zynq_cse.h +++ b/include/configs/zynq_cse.h @@ -12,7 +12,7 @@ #include <configs/zynq-common.h> /* Undef unneeded configs */ -#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CFG_EXTRA_ENV_SETTINGS #undef CFG_SYS_INIT_RAM_ADDR #undef CFG_SYS_INIT_RAM_SIZE diff --git a/include/dfu.h b/include/dfu.h index dcb9cd9d799..07922224ef1 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -495,7 +495,7 @@ static inline int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, } #endif -#ifdef CONFIG_DFU_VIRT +#if CONFIG_IS_ENABLED(DFU_VIRT) int dfu_fill_entity_virt(struct dfu_entity *dfu, char *devstr, char **argv, int argc); int dfu_write_medium_virt(struct dfu_entity *dfu, u64 offset, diff --git a/include/dm/platform_data/net_ethoc.h b/include/dm/platform_data/net_ethoc.h index 855e9999a0a..44547d14f53 100644 --- a/include/dm/platform_data/net_ethoc.h +++ b/include/dm/platform_data/net_ethoc.h @@ -8,13 +8,9 @@ #include <net.h> -#ifdef CONFIG_DM_ETH - struct ethoc_eth_pdata { struct eth_pdata eth_pdata; phys_addr_t packet_base; }; -#endif - #endif /* _ETHOC_H */ diff --git a/include/dt-bindings/clock/rk3128-cru.h b/include/dt-bindings/clock/rk3128-cru.h index cfb3afbb285..6a47825dac5 100644 --- a/include/dt-bindings/clock/rk3128-cru.h +++ b/include/dt-bindings/clock/rk3128-cru.h @@ -1,6 +1,7 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* - * (C) Copyright 2017 Rockchip Electronics Co., Ltd + * Copyright (c) 2017 Rockchip Electronics Co. Ltd. + * Author: Elaine <zhangqing@rock-chips.com> */ #ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3128_H @@ -9,30 +10,31 @@ /* core clocks */ #define PLL_APLL 1 #define PLL_DPLL 2 -#define PLL_GPLL 3 -#define ARMCLK 4 +#define PLL_CPLL 3 +#define PLL_GPLL 4 +#define ARMCLK 5 +#define PLL_GPLL_DIV2 6 +#define PLL_GPLL_DIV3 7 /* sclk gates (special clocks) */ -#define SCLK_GPU 64 -#define SCLK_SPI 65 +#define SCLK_SPI0 65 +#define SCLK_NANDC 67 #define SCLK_SDMMC 68 #define SCLK_SDIO 69 #define SCLK_EMMC 71 -#define SCLK_NANDC 76 #define SCLK_UART0 77 #define SCLK_UART1 78 #define SCLK_UART2 79 -#define SCLK_I2S 82 +#define SCLK_I2S0 80 +#define SCLK_I2S1 81 #define SCLK_SPDIF 83 #define SCLK_TIMER0 85 #define SCLK_TIMER1 86 #define SCLK_TIMER2 87 #define SCLK_TIMER3 88 +#define SCLK_TIMER4 89 +#define SCLK_TIMER5 90 #define SCLK_SARADC 91 -#define SCLK_OTGPHY0 93 -#define SCLK_LCDC 100 -#define SCLK_HDMI 109 -#define SCLK_HEVC 111 #define SCLK_I2S_OUT 113 #define SCLK_SDMMC_DRV 114 #define SCLK_SDIO_DRV 115 @@ -40,115 +42,173 @@ #define SCLK_SDMMC_SAMPLE 118 #define SCLK_SDIO_SAMPLE 119 #define SCLK_EMMC_SAMPLE 121 -#define SCLK_PVTM_CORE 123 -#define SCLK_PVTM_GPU 124 -#define SCLK_PVTM_VIDEO 125 -#define SCLK_MAC 151 -#define SCLK_MACREF 152 -#define SCLK_SFC 160 +#define SCLK_VOP 122 +#define SCLK_MAC_SRC 124 +#define SCLK_MAC 126 +#define SCLK_MAC_REFOUT 127 +#define SCLK_MAC_REF 128 +#define SCLK_MAC_RX 129 +#define SCLK_MAC_TX 130 +#define SCLK_HEVC_CORE 134 +#define SCLK_RGA 135 +#define SCLK_CRYPTO 138 +#define SCLK_TSP 139 +#define SCLK_OTGPHY0 142 +#define SCLK_OTGPHY1 143 +#define SCLK_DDRC 144 +#define SCLK_PVTM_FUNC 145 +#define SCLK_PVTM_CORE 146 +#define SCLK_PVTM_GPU 147 +#define SCLK_MIPI_24M 148 +#define SCLK_PVTM 149 +#define SCLK_CIF_SRC 150 +#define SCLK_CIF_OUT_SRC 151 +#define SCLK_CIF_OUT 152 +#define SCLK_SFC 153 +#define SCLK_USB480M 154 -#define DCLK_LCDC 190 +/* dclk gates */ +#define DCLK_VOP 190 +#define DCLK_EBC 191 /* aclk gates */ -#define ACLK_DMAC2 194 -#define ACLK_VIO0 197 -#define ACLK_VIO1 203 -#define ACLK_VCODEC 208 -#define ACLK_CPU 209 +#define ACLK_VIO0 192 +#define ACLK_VIO1 193 +#define ACLK_DMAC 194 +#define ACLK_CPU 195 +#define ACLK_VEPU 196 +#define ACLK_VDPU 197 +#define ACLK_CIF 198 +#define ACLK_IEP 199 +#define ACLK_LCDC0 204 +#define ACLK_RGA 205 #define ACLK_PERI 210 +#define ACLK_VOP 211 +#define ACLK_GMAC 212 +#define ACLK_GPU 213 /* pclk gates */ #define PCLK_SARADC 318 +#define PCLK_WDT 319 #define PCLK_GPIO0 320 #define PCLK_GPIO1 321 #define PCLK_GPIO2 322 #define PCLK_GPIO3 323 +#define PCLK_VIO_H2P 324 +#define PCLK_MIPI 325 +#define PCLK_EFUSE 326 +#define PCLK_HDMI 327 +#define PCLK_ACODEC 328 #define PCLK_GRF 329 #define PCLK_I2C0 332 #define PCLK_I2C1 333 #define PCLK_I2C2 334 #define PCLK_I2C3 335 -#define PCLK_SPI 338 +#define PCLK_SPI0 338 #define PCLK_UART0 341 #define PCLK_UART1 342 #define PCLK_UART2 343 +#define PCLK_TSADC 344 #define PCLK_PWM 350 #define PCLK_TIMER 353 -#define PCLK_HDMI 360 -#define PCLK_CPU 362 +#define PCLK_CPU 354 #define PCLK_PERI 363 -#define PCLK_DDRUPCTL 364 -#define PCLK_WDT 368 +#define PCLK_GMAC 367 +#define PCLK_PMU_PRE 368 +#define PCLK_SIM_CARD 369 /* hclk gates */ -#define HCLK_OTG0 449 -#define HCLK_OTG1 450 +#define HCLK_SPDIF 440 +#define HCLK_GPS 441 +#define HCLK_USBHOST 442 +#define HCLK_I2S_8CH 443 +#define HCLK_I2S_2CH 444 +#define HCLK_VOP 452 #define HCLK_NANDC 453 #define HCLK_SDMMC 456 #define HCLK_SDIO 457 #define HCLK_EMMC 459 -#define HCLK_I2S 462 -#define HCLK_LCDC 465 -#define HCLK_ROM 467 -#define HCLK_VIO_BUS 472 -#define HCLK_VCODEC 476 -#define HCLK_CPU 477 +#define HCLK_CPU 460 +#define HCLK_VEPU 461 +#define HCLK_VDPU 462 +#define HCLK_LCDC0 463 +#define HCLK_EBC 465 +#define HCLK_VIO 466 +#define HCLK_RGA 467 +#define HCLK_IEP 468 +#define HCLK_VIO_H2P 469 +#define HCLK_CIF 470 +#define HCLK_HOST2 473 +#define HCLK_OTG 474 +#define HCLK_TSP 475 +#define HCLK_CRYPTO 476 #define HCLK_PERI 478 #define CLK_NR_CLKS (HCLK_PERI + 1) /* soft-reset indices */ -#define SRST_CORE0 0 -#define SRST_CORE1 1 -#define SRST_CORE0_DBG 4 -#define SRST_CORE1_DBG 5 -#define SRST_CORE0_POR 8 -#define SRST_CORE1_POR 9 -#define SRST_L2C 12 -#define SRST_TOPDBG 13 +#define SRST_CORE0_PO 0 +#define SRST_CORE1_PO 1 +#define SRST_CORE2_PO 2 +#define SRST_CORE3_PO 3 +#define SRST_CORE0 4 +#define SRST_CORE1 5 +#define SRST_CORE2 6 +#define SRST_CORE3 7 +#define SRST_CORE0_DBG 8 +#define SRST_CORE1_DBG 9 +#define SRST_CORE2_DBG 10 +#define SRST_CORE3_DBG 11 +#define SRST_TOPDBG 12 +#define SRST_ACLK_CORE 13 #define SRST_STRC_SYS_A 14 -#define SRST_PD_CORE_NIU 15 +#define SRST_L2C 15 -#define SRST_TIMER2 16 -#define SRST_CPUSYS_H 17 -#define SRST_AHB2APB_H 19 -#define SRST_TIMER3 20 +#define SRST_CPUSYS_H 18 +#define SRST_AHB2APBSYS_H 19 +#define SRST_SPDIF 20 #define SRST_INTMEM 21 #define SRST_ROM 22 #define SRST_PERI_NIU 23 -#define SRST_I2S 24 -#define SRST_DDR_PLL 25 -#define SRST_GPU_DLL 26 -#define SRST_TIMER0 27 -#define SRST_TIMER1 28 -#define SRST_CORE_DLL 29 +#define SRST_I2S_2CH 24 +#define SRST_I2S_8CH 25 +#define SRST_GPU_PVTM 26 +#define SRST_FUNC_PVTM 27 +#define SRST_CORE_PVTM 29 #define SRST_EFUSE_P 30 #define SRST_ACODEC_P 31 #define SRST_GPIO0 32 #define SRST_GPIO1 33 #define SRST_GPIO2 34 +#define SRST_GPIO3 35 +#define SRST_MIPIPHY_P 36 #define SRST_UART0 39 #define SRST_UART1 40 #define SRST_UART2 41 #define SRST_I2C0 43 #define SRST_I2C1 44 #define SRST_I2C2 45 +#define SRST_I2C3 46 #define SRST_SFC 47 -#define SRST_PWM0 48 +#define SRST_PWM 48 +#define SRST_DAP_PO 50 #define SRST_DAP 51 #define SRST_DAP_SYS 52 +#define SRST_CRYPTO 53 #define SRST_GRF 55 -#define SRST_PERIPHSYS_A 57 -#define SRST_PERIPHSYS_H 58 -#define SRST_PERIPHSYS_P 59 +#define SRST_GMAC 56 +#define SRST_PERIPH_SYS_A 57 +#define SRST_PERIPH_SYS_H 58 +#define SRST_PERIPH_SYS_P 59 +#define SRST_SMART_CARD 60 #define SRST_CPU_PERI 61 #define SRST_EMEM_PERI 62 #define SRST_USB_PERI 63 -#define SRST_DMA2 64 -#define SRST_MAC 66 +#define SRST_DMA 64 +#define SRST_GPS 67 #define SRST_NANDC 68 #define SRST_USBOTG0 69 #define SRST_OTGC0 71 @@ -156,34 +216,58 @@ #define SRST_OTGC1 74 #define SRST_DDRMSCH 79 -#define SRST_MMC0 81 +#define SRST_SDMMC 81 #define SRST_SDIO 82 #define SRST_EMMC 83 -#define SRST_SPI0 84 +#define SRST_SPI 84 #define SRST_WDT 86 #define SRST_SARADC 87 #define SRST_DDRPHY 88 #define SRST_DDRPHY_P 89 #define SRST_DDRCTRL 90 #define SRST_DDRCTRL_P 91 +#define SRST_TSP 92 +#define SRST_TSP_CLKIN 93 +#define SRST_HOST0_ECHI 94 #define SRST_HDMI_P 96 +#define SRST_VIO_ARBI_H 97 +#define SRST_VIO0_A 98 #define SRST_VIO_BUS_H 99 +#define SRST_VOP_A 100 +#define SRST_VOP_H 101 +#define SRST_VOP_D 102 #define SRST_UTMI0 103 #define SRST_UTMI1 104 #define SRST_USBPOR 105 +#define SRST_IEP_A 106 +#define SRST_IEP_H 107 +#define SRST_RGA_A 108 +#define SRST_RGA_H 109 +#define SRST_CIF0 110 +#define SRST_PMU 111 #define SRST_VCODEC_A 112 #define SRST_VCODEC_H 113 #define SRST_VIO1_A 114 -#define SRST_HEVC 115 +#define SRST_HEVC_CORE 115 #define SRST_VCODEC_NIU_A 116 -#define SRST_LCDC1_A 117 -#define SRST_LCDC1_H 118 -#define SRST_LCDC1_D 119 +#define SRST_PMU_NIU_P 117 +#define SRST_LCDC0_S 119 #define SRST_GPU 120 #define SRST_GPU_NIU_A 122 +#define SRST_EBC_A 123 +#define SRST_EBC_H 124 -#define SRST_DBG_P 131 +#define SRST_CORE_DBG 128 +#define SRST_DBG_P 129 +#define SRST_TIMER0 130 +#define SRST_TIMER1 131 +#define SRST_TIMER2 132 +#define SRST_TIMER3 133 +#define SRST_TIMER4 134 +#define SRST_TIMER5 135 +#define SRST_VIO_H2P 136 +#define SRST_VIO_MIPI_DSI 137 #endif diff --git a/include/dt-bindings/clock/stm32mp13-clks.h b/include/dt-bindings/clock/stm32mp13-clks.h new file mode 100644 index 00000000000..799dee5b802 --- /dev/null +++ b/include/dt-bindings/clock/stm32mp13-clks.h @@ -0,0 +1,229 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later or BSD-3-Clause */ +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Gabriel Fernandez <gabriel.fernandez@foss.st.com> for STMicroelectronics. + */ + +#ifndef _DT_BINDINGS_STM32MP13_CLKS_H_ +#define _DT_BINDINGS_STM32MP13_CLKS_H_ + +/* OSCILLATOR clocks */ +#define CK_HSE 0 +#define CK_CSI 1 +#define CK_LSI 2 +#define CK_LSE 3 +#define CK_HSI 4 +#define CK_HSE_DIV2 5 + +/* PLL */ +#define PLL1 6 +#define PLL2 7 +#define PLL3 8 +#define PLL4 9 + +/* ODF */ +#define PLL1_P 10 +#define PLL1_Q 11 +#define PLL1_R 12 +#define PLL2_P 13 +#define PLL2_Q 14 +#define PLL2_R 15 +#define PLL3_P 16 +#define PLL3_Q 17 +#define PLL3_R 18 +#define PLL4_P 19 +#define PLL4_Q 20 +#define PLL4_R 21 + +#define PCLK1 22 +#define PCLK2 23 +#define PCLK3 24 +#define PCLK4 25 +#define PCLK5 26 +#define PCLK6 27 + +/* SYSTEM CLOCK */ +#define CK_PER 28 +#define CK_MPU 29 +#define CK_AXI 30 +#define CK_MLAHB 31 + +/* BASE TIMER */ +#define CK_TIMG1 32 +#define CK_TIMG2 33 +#define CK_TIMG3 34 + +/* AUX */ +#define RTC 35 + +/* TRACE & DEBUG clocks */ +#define CK_DBG 36 +#define CK_TRACE 37 + +/* MCO clocks */ +#define CK_MCO1 38 +#define CK_MCO2 39 + +/* IP clocks */ +#define SYSCFG 40 +#define VREF 41 +#define DTS 42 +#define PMBCTRL 43 +#define HDP 44 +#define IWDG2 45 +#define STGENRO 46 +#define USART1 47 +#define RTCAPB 48 +#define TZC 49 +#define TZPC 50 +#define IWDG1 51 +#define BSEC 52 +#define DMA1 53 +#define DMA2 54 +#define DMAMUX1 55 +#define DMAMUX2 56 +#define GPIOA 57 +#define GPIOB 58 +#define GPIOC 59 +#define GPIOD 60 +#define GPIOE 61 +#define GPIOF 62 +#define GPIOG 63 +#define GPIOH 64 +#define GPIOI 65 +#define CRYP1 66 +#define HASH1 67 +#define BKPSRAM 68 +#define MDMA 69 +#define CRC1 70 +#define USBH 71 +#define DMA3 72 +#define TSC 73 +#define PKA 74 +#define AXIMC 75 +#define MCE 76 +#define ETH1TX 77 +#define ETH2TX 78 +#define ETH1RX 79 +#define ETH2RX 80 +#define ETH1MAC 81 +#define ETH2MAC 82 +#define ETH1STP 83 +#define ETH2STP 84 + +/* IP clocks with parents */ +#define SDMMC1_K 85 +#define SDMMC2_K 86 +#define ADC1_K 87 +#define ADC2_K 88 +#define FMC_K 89 +#define QSPI_K 90 +#define RNG1_K 91 +#define USBPHY_K 92 +#define STGEN_K 93 +#define SPDIF_K 94 +#define SPI1_K 95 +#define SPI2_K 96 +#define SPI3_K 97 +#define SPI4_K 98 +#define SPI5_K 99 +#define I2C1_K 100 +#define I2C2_K 101 +#define I2C3_K 102 +#define I2C4_K 103 +#define I2C5_K 104 +#define TIM2_K 105 +#define TIM3_K 106 +#define TIM4_K 107 +#define TIM5_K 108 +#define TIM6_K 109 +#define TIM7_K 110 +#define TIM12_K 111 +#define TIM13_K 112 +#define TIM14_K 113 +#define TIM1_K 114 +#define TIM8_K 115 +#define TIM15_K 116 +#define TIM16_K 117 +#define TIM17_K 118 +#define LPTIM1_K 119 +#define LPTIM2_K 120 +#define LPTIM3_K 121 +#define LPTIM4_K 122 +#define LPTIM5_K 123 +#define USART1_K 124 +#define USART2_K 125 +#define USART3_K 126 +#define UART4_K 127 +#define UART5_K 128 +#define USART6_K 129 +#define UART7_K 130 +#define UART8_K 131 +#define DFSDM_K 132 +#define FDCAN_K 133 +#define SAI1_K 134 +#define SAI2_K 135 +#define ADFSDM_K 136 +#define USBO_K 137 +#define LTDC_PX 138 +#define ETH1CK_K 139 +#define ETH1PTP_K 140 +#define ETH2CK_K 141 +#define ETH2PTP_K 142 +#define DCMIPP_K 143 +#define SAES_K 144 +#define DTS_K 145 + +/* DDR */ +#define DDRC1 146 +#define DDRC1LP 147 +#define DDRC2 148 +#define DDRC2LP 149 +#define DDRPHYC 150 +#define DDRPHYCLP 151 +#define DDRCAPB 152 +#define DDRCAPBLP 153 +#define AXIDCG 154 +#define DDRPHYCAPB 155 +#define DDRPHYCAPBLP 156 +#define DDRPERFM 157 + +#define ADC1 158 +#define ADC2 159 +#define SAI1 160 +#define SAI2 161 + +#define STM32MP1_LAST_CLK 162 + +/* SCMI clock identifiers */ +#define CK_SCMI_HSE 0 +#define CK_SCMI_HSI 1 +#define CK_SCMI_CSI 2 +#define CK_SCMI_LSE 3 +#define CK_SCMI_LSI 4 +#define CK_SCMI_HSE_DIV2 5 +#define CK_SCMI_PLL2_Q 6 +#define CK_SCMI_PLL2_R 7 +#define CK_SCMI_PLL3_P 8 +#define CK_SCMI_PLL3_Q 9 +#define CK_SCMI_PLL3_R 10 +#define CK_SCMI_PLL4_P 11 +#define CK_SCMI_PLL4_Q 12 +#define CK_SCMI_PLL4_R 13 +#define CK_SCMI_MPU 14 +#define CK_SCMI_AXI 15 +#define CK_SCMI_MLAHB 16 +#define CK_SCMI_CKPER 17 +#define CK_SCMI_PCLK1 18 +#define CK_SCMI_PCLK2 19 +#define CK_SCMI_PCLK3 20 +#define CK_SCMI_PCLK4 21 +#define CK_SCMI_PCLK5 22 +#define CK_SCMI_PCLK6 23 +#define CK_SCMI_CKTIMG1 24 +#define CK_SCMI_CKTIMG2 25 +#define CK_SCMI_CKTIMG3 26 +#define CK_SCMI_RTC 27 +#define CK_SCMI_RTCAPB 28 + +#endif /* _DT_BINDINGS_STM32MP13_CLKS_H_ */ diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h index a5204ab91d3..e8418318eb9 100644 --- a/include/dt-bindings/pinctrl/k3.h +++ b/include/dt-bindings/pinctrl/k3.h @@ -44,4 +44,7 @@ #define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + #endif diff --git a/include/dt-bindings/reset/stm32mp13-resets.h b/include/dt-bindings/reset/stm32mp13-resets.h new file mode 100644 index 00000000000..18ccb05db6c --- /dev/null +++ b/include/dt-bindings/reset/stm32mp13-resets.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later or BSD-3-Clause */ +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Gabriel Fernandez <gabriel.fernandez@foss.st.com> for STMicroelectronics. + */ + +#ifndef _DT_BINDINGS_STM32MP13_RESET_H_ +#define _DT_BINDINGS_STM32MP13_RESET_H_ + +#define TIM2_R 13568 +#define TIM3_R 13569 +#define TIM4_R 13570 +#define TIM5_R 13571 +#define TIM6_R 13572 +#define TIM7_R 13573 +#define LPTIM1_R 13577 +#define SPI2_R 13579 +#define SPI3_R 13580 +#define USART3_R 13583 +#define UART4_R 13584 +#define UART5_R 13585 +#define UART7_R 13586 +#define UART8_R 13587 +#define I2C1_R 13589 +#define I2C2_R 13590 +#define SPDIF_R 13594 +#define TIM1_R 13632 +#define TIM8_R 13633 +#define SPI1_R 13640 +#define USART6_R 13645 +#define SAI1_R 13648 +#define SAI2_R 13649 +#define DFSDM_R 13652 +#define FDCAN_R 13656 +#define LPTIM2_R 13696 +#define LPTIM3_R 13697 +#define LPTIM4_R 13698 +#define LPTIM5_R 13699 +#define SYSCFG_R 13707 +#define VREF_R 13709 +#define DTS_R 13712 +#define PMBCTRL_R 13713 +#define LTDC_R 13760 +#define DCMIPP_R 13761 +#define DDRPERFM_R 13768 +#define USBPHY_R 13776 +#define STGEN_R 13844 +#define USART1_R 13888 +#define USART2_R 13889 +#define SPI4_R 13890 +#define SPI5_R 13891 +#define I2C3_R 13892 +#define I2C4_R 13893 +#define I2C5_R 13894 +#define TIM12_R 13895 +#define TIM13_R 13896 +#define TIM14_R 13897 +#define TIM15_R 13898 +#define TIM16_R 13899 +#define TIM17_R 13900 +#define DMA1_R 13952 +#define DMA2_R 13953 +#define DMAMUX1_R 13954 +#define DMA3_R 13955 +#define DMAMUX2_R 13956 +#define ADC1_R 13957 +#define ADC2_R 13958 +#define USBO_R 13960 +#define GPIOA_R 14080 +#define GPIOB_R 14081 +#define GPIOC_R 14082 +#define GPIOD_R 14083 +#define GPIOE_R 14084 +#define GPIOF_R 14085 +#define GPIOG_R 14086 +#define GPIOH_R 14087 +#define GPIOI_R 14088 +#define TSC_R 14095 +#define PKA_R 14146 +#define SAES_R 14147 +#define CRYP1_R 14148 +#define HASH1_R 14149 +#define RNG1_R 14150 +#define AXIMC_R 14160 +#define MDMA_R 14208 +#define MCE_R 14209 +#define ETH1MAC_R 14218 +#define FMC_R 14220 +#define QSPI_R 14222 +#define SDMMC1_R 14224 +#define SDMMC2_R 14225 +#define CRC1_R 14228 +#define USBH_R 14232 +#define ETH2MAC_R 14238 + +/* SCMI reset domain identifiers */ +#define RST_SCMI_LTDC 0 +#define RST_SCMI_MDMA 1 + +#endif /* _DT_BINDINGS_STM32MP13_RESET_H_ */ diff --git a/include/efi_api.h b/include/efi_api.h index 9bb0d44ac8d..00c98e0984d 100644 --- a/include/efi_api.h +++ b/include/efi_api.h @@ -232,7 +232,7 @@ enum efi_reset_type { #define EFI_CONFORMANCE_PROFILES_TABLE_VERSION 1 -#define EFI_CONFORMANCE_PROFILE_EBBR_2_0_GUID \ +#define EFI_CONFORMANCE_PROFILE_EBBR_2_1_GUID \ EFI_GUID(0xcce33c35, 0x74ac, 0x4087, 0xbc, 0xe7, \ 0x8b, 0x29, 0xb0, 0x2e, 0xeb, 0x27) diff --git a/include/env_default.h b/include/env_default.h index 7c9c00a9692..c0df39d62f9 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -53,11 +53,11 @@ const char default_environment[] = { #ifdef CONFIG_ETHPRIME "ethprime=" CONFIG_ETHPRIME "\0" #endif -#ifdef CONFIG_IPADDR - "ipaddr=" __stringify(CONFIG_IPADDR) "\0" +#ifdef CONFIG_USE_IPADDR + "ipaddr=" CONFIG_IPADDR "\0" #endif -#ifdef CONFIG_SERVERIP - "serverip=" __stringify(CONFIG_SERVERIP) "\0" +#ifdef CONFIG_USE_SERVERIP + "serverip=" CONFIG_SERVERIP "\0" #endif #ifdef CONFIG_SYS_DISABLE_AUTOLOAD "autoload=0\0" @@ -65,17 +65,17 @@ const char default_environment[] = { #ifdef CONFIG_PREBOOT_DEFINED "preboot=" CONFIG_PREBOOT "\0" #endif -#ifdef CONFIG_ROOTPATH +#ifdef CONFIG_USE_ROOTPATH "rootpath=" CONFIG_ROOTPATH "\0" #endif -#ifdef CONFIG_GATEWAYIP - "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" +#ifdef CONFIG_USE_GATEWAYIP + "gatewayip=" CONFIG_GATEWAYIP "\0" #endif -#ifdef CONFIG_NETMASK - "netmask=" __stringify(CONFIG_NETMASK) "\0" +#ifdef CONFIG_USE_NETMASK + "netmask=" CONFIG_NETMASK "\0" #endif -#ifdef CONFIG_HOSTNAME - "hostname=" CONFIG_HOSTNAME "\0" +#ifdef CONFIG_USE_HOSTNAME + "hostname=" CONFIG_HOSTNAME "\0" #endif #ifdef CONFIG_USE_BOOTFILE "bootfile=" CONFIG_BOOTFILE "\0" @@ -118,8 +118,8 @@ const char default_environment[] = { /* This is created in the Makefile */ CONFIG_EXTRA_ENV_TEXT #endif -#ifdef CONFIG_EXTRA_ENV_SETTINGS - CONFIG_EXTRA_ENV_SETTINGS +#ifdef CFG_EXTRA_ENV_SETTINGS + CFG_EXTRA_ENV_SETTINGS #endif "\0" #else /* CONFIG_USE_DEFAULT_ENV_FILE */ diff --git a/include/env_flags.h b/include/env_flags.h index 718d72773ca..6bd574c2bdb 100644 --- a/include/env_flags.h +++ b/include/env_flags.h @@ -35,8 +35,8 @@ enum env_flags_varaccess { #define ENV_FLAGS_VARTYPE_LOC 0 #define ENV_FLAGS_VARACCESS_LOC 1 -#ifndef CONFIG_ENV_FLAGS_LIST_STATIC -#define CONFIG_ENV_FLAGS_LIST_STATIC "" +#ifndef CFG_ENV_FLAGS_LIST_STATIC +#define CFG_ENV_FLAGS_LIST_STATIC "" #endif #ifdef CONFIG_NET @@ -87,7 +87,7 @@ enum env_flags_varaccess { NET_FLAGS \ NET6_FLAGS \ SERIAL_FLAGS \ - CONFIG_ENV_FLAGS_LIST_STATIC + CFG_ENV_FLAGS_LIST_STATIC #ifdef CONFIG_CMD_ENV_FLAGS /* diff --git a/include/env_internal.h b/include/env_internal.h index f30fd6159d8..aee6b3e48fa 100644 --- a/include/env_internal.h +++ b/include/env_internal.h @@ -41,10 +41,6 @@ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) # define ENV_IS_EMBEDDED # endif -# ifdef CONFIG_ENV_IS_EMBEDDED -# error "do not define CONFIG_ENV_IS_EMBEDDED in your board config" -# error "it is calculated automatically for you" -# endif #endif /* CONFIG_ENV_IS_IN_FLASH */ #if defined(CONFIG_ENV_IS_IN_NAND) @@ -57,23 +53,6 @@ extern unsigned long nand_env_oob_offset; # endif /* CONFIG_ENV_OFFSET_OOB */ #endif /* CONFIG_ENV_IS_IN_NAND */ -/* - * For the flash types where embedded env is supported, but it cannot be - * calculated automatically (i.e. NAND), take the board opt-in. - */ -#if defined(CONFIG_ENV_IS_EMBEDDED) && !defined(ENV_IS_EMBEDDED) -# define ENV_IS_EMBEDDED -#endif - -/* The build system likes to know if the env is embedded */ -#ifdef DO_DEPS_ONLY -# ifdef ENV_IS_EMBEDDED -# ifndef CONFIG_ENV_IS_EMBEDDED -# define CONFIG_ENV_IS_EMBEDDED -# endif -# endif -#endif - #include "compiler.h" #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT @@ -88,7 +67,7 @@ extern unsigned long nand_env_oob_offset; * If the environment is in RAM, allocate extra space for it in the malloc * region. */ -#if defined(CONFIG_ENV_IS_EMBEDDED) +#if defined(ENV_IS_EMBEDDED) #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN #elif (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE < CONFIG_SYS_MONITOR_BASE) || \ (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) || \ diff --git a/include/environment/pg-wcom/common.env b/include/environment/pg-wcom/common.env new file mode 100644 index 00000000000..4b660cebd67 --- /dev/null +++ b/include/environment/pg-wcom/common.env @@ -0,0 +1,68 @@ + +#ifndef WCOM_UBI_PARTITION_APP +/* one flash chip only called boot */ +# define WCOM_UBI_LINUX_MTD ubi.mtd=ubi0 +ubiattach=ubi part ubi0 +#else /* WCOM_UBI_PARTITION_APP */ +/* two flash chips called boot and app */ +# define WCOM_UBI_LINUX_MTD ubi.mtd=ubi0 ubi.mtd=ubi1 +ubiattach=if test ${boot_bank} -eq 0; + then; + ubi part ubi0; + else; + ubi part ubi1; + fi +#endif /* WCOMC_UBI_PARTITION_APP */ + +actual_bank=0 + +add_default=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off: + console=ttyS0,${baudrate} mem=${kernelmem} init=${init} + phram.phram=phvar,${varaddr},CONFIG_KM_PHRAM + WCOM_UBI_LINUX_MTD + +addpanic=setenv bootargs ${bootargs} panic=1 panic_on_oops=1 +altbootcmd=run bootcmd +backup_bank=0 +boot=bootm ${load_addr_r} - ${fdt_addr_r} + +bootcmd=km_checkbidhwk && + setenv bootcmd 'if km_checktestboot; + then; + setenv boot_bank ${test_bank}; + else; + setenv boot_bank ${actual_bank}; + fi; + run ${subbootcmds}; reset' && + setenv altbootcmd 'setenv boot_bank ${backup_bank}; + run ${subbootcmds}; + reset' && + saveenv && + saveenv && + boot + +cramfsaddr=CONFIG_KM_CRAMFS_ADDR +cramfsloadfdt=cramfsload ${fdt_addr_r} fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb +cramfsloadkernel=cramfsload ${load_addr_r} ${uimage} + +develop=tftp ${load_addr_r} scripts/develop-${arch}.txt && + env import -t ${load_addr_r} ${filesize} && + run setup_debug_env + +env_version=1 +fdt_addr_r=CONFIG_KM_FDT_ADDR +flashargs=setenv bootargs root=mtdblock:rootfs${boot_bank} rootfstype=squashfs ro +init=/sbin/init-overlay.sh +load=tftpboot ${load_addr_r} ${hostname}/u-boot.bin +load_addr_r=CONFIG_KM_KERNEL_ADDR +pnvramsize=CONFIG_KM_PNVRAM + +ramfs=tftp ${load_addr_r} scripts/ramfs-${arch}.txt && + env import -t ${load_addr_r} ${filesize} && + run setup_debug_env + +release=run newenv; reset +subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt set_fdthigh + cramfsloadkernel flashargs add_default addpanic boot +testbootcmd=setenv boot_bank ${test_bank}; run ${subbootcmds}; reset +ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank} diff --git a/include/environment/pg-wcom/ls102xa.env b/include/environment/pg-wcom/ls102xa.env new file mode 100644 index 00000000000..5b5bda95e28 --- /dev/null +++ b/include/environment/pg-wcom/ls102xa.env @@ -0,0 +1,29 @@ +#define WCOM_UBI_PARTITION_APP + +#include <environment/pg-wcom/common.env> + +EEprom_ivm=pca9547:70:9 +boot=bootm $load_addr_r - $fdt_addr_r +checkfdt=true +cramfsloadfdt=cramfsload $fdt_addr_r fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb +ethrotate=no +hwconfig=devdis:esdhc,usb3,usb2,sata,sec,dcu,duart2,qspi,can1,can2_4,ftm2_8,i2c2_3,sai1_4,lpuart2_6,asrc,spdif,lpuart1,ftm1 +netdev=eth2 + +newenv=protect off CONFIG_ENV_ADDR_REDUND +0x40000 && + erase CONFIG_ENV_ADDR_REDUND +0x40000 && + protect on CONFIG_ENV_ADDR_REDUND +0x40000 + +set_fdthigh=true + +update=protect off CONFIG_SYS_MONITOR_BASE +${filesize} && + erase CONFIG_SYS_MONITOR_BASE +${filesize} && + cp.b ${load_addr_r} CONFIG_SYS_MONITOR_BASE ${filesize} && + protect on CONFIG_SYS_MONITOR_BASE +${filesize} + +update-nor=protect off CONFIG_SYS_FLASH_BASE +${filesize} && + erase CONFIG_SYS_FLASH_BASE +${filesize} && + cp.b ${load_addr_r} CONFIG_SYS_FLASH_BASE ${filesize} && + protect on CONFIG_SYS_MONITOR_BASE +0x100000 + +uimage=uImage diff --git a/include/environment/pg-wcom/powerpc.env b/include/environment/pg-wcom/powerpc.env new file mode 100644 index 00000000000..a57fd93092d --- /dev/null +++ b/include/environment/pg-wcom/powerpc.env @@ -0,0 +1,14 @@ +arch=ppc_82xx +bootm_mapsize=CONFIG_SYS_BOOTM_LEN +checkfdt=true +set_fdthigh=true + +update=protect off BOOTFLASH_START +${filesize} && + erase BOOTFLASH_START +${filesize} && + cp.b ${load_addr_r} BOOTFLASH_START ${filesize} && + protect on BOOTFLASH_START +${filesize} + +newenv=prot off CONFIG_ENV_ADDR +0x40000 && + era CONFIG_ENV_ADDR +0x40000 + +unlock=yes diff --git a/include/fm_eth.h b/include/fm_eth.h index aeb640925ee..6012a449fd2 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -202,7 +202,6 @@ struct memac_mdio_info { int fm_tgec_mdio_init(struct bd_info *bis, struct tgec_mdio_info *info); int fm_memac_mdio_init(struct bd_info *bis, struct memac_mdio_info *info); -int fm_standard_init(struct bd_info *bis); void fman_enet_init(void); void fdt_fixup_fman_ethernet(void *fdt); phy_interface_t fm_info_get_enet_if(enum fm_port port); diff --git a/include/fsl_validate.h b/include/fsl_validate.h index 252d499e7b1..fbcbd424967 100644 --- a/include/fsl_validate.h +++ b/include/fsl_validate.h @@ -280,4 +280,11 @@ int fsl_setenv_chain_of_trust(void); * Architecture header (appended to U-boot image). */ void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr); + +/* + * This header is appended at end of image and copied to DDR along + * with the U-Boot image and later used as part of the validation + * flow + */ +#define FSL_U_BOOT_HDR_SIZE (16 << 10) #endif diff --git a/include/i2c.h b/include/i2c.h index 51390f8fd84..ef3820eaba7 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -635,12 +635,12 @@ void i2c_early_init_f(void); #if !defined(CFG_SYS_I2C_MAX_HOPS) /* no muxes used bus = i2c adapters */ -#define CONFIG_SYS_I2C_DIRECT_BUS 1 +#define CFG_SYS_I2C_DIRECT_BUS 1 #define CFG_SYS_I2C_MAX_HOPS 0 #define CFG_SYS_NUM_I2C_BUSES ll_entry_count(struct i2c_adapter, i2c) #else /* we use i2c muxes */ -#undef CONFIG_SYS_I2C_DIRECT_BUS +#undef CFG_SYS_I2C_DIRECT_BUS #endif /* define the I2C bus number for RTC and DTT if not already done */ @@ -691,7 +691,7 @@ struct i2c_adapter { struct i2c_adapter *i2c_get_adapter(int index); -#ifndef CONFIG_SYS_I2C_DIRECT_BUS +#ifndef CFG_SYS_I2C_DIRECT_BUS struct i2c_mux { int id; char name[16]; @@ -720,7 +720,7 @@ extern struct i2c_bus_hose i2c_bus[]; #define I2C_ADAP I2C_ADAP_NR(gd->cur_i2c_bus) #define I2C_ADAP_HWNR (I2C_ADAP->hwadapnr) -#ifndef CONFIG_SYS_I2C_DIRECT_BUS +#ifndef CFG_SYS_I2C_DIRECT_BUS #define I2C_MUX_PCA9540_ID 1 #define I2C_MUX_PCA9540 {I2C_MUX_PCA9540_ID, "PCA9540B"} #define I2C_MUX_PCA9542_ID 2 @@ -930,7 +930,7 @@ unsigned int i2c_get_bus_speed(void); * only for backwardcompatibility, should go away if we switched * completely to new multibus support. */ -#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) +#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CFG_I2C_MULTI_BUS) # if !defined(CFG_SYS_MAX_I2C_BUS) # define CFG_SYS_MAX_I2C_BUS 2 # endif diff --git a/include/image.h b/include/image.h index 6f21dafba8c..bed75ce1b38 100644 --- a/include/image.h +++ b/include/image.h @@ -229,6 +229,7 @@ enum image_type_t { IH_TYPE_COPRO, /* Coprocessor Image for remoteproc*/ IH_TYPE_SUNXI_EGON, /* Allwinner eGON Boot Image */ IH_TYPE_SUNXI_TOC0, /* Allwinner TOC0 Boot Image */ + IH_TYPE_FDT_LEGACY, /* Binary Flat Device Tree Blob in a Legacy Image */ IH_TYPE_COUNT, /* Number of image types */ }; @@ -710,15 +711,23 @@ int fit_image_load(struct bootm_headers *images, ulong addr, /** * image_source_script() - Execute a script + * @addr: Address of script + * @fit_uname: FIT subimage name + * @confname: FIT config name. The subimage is chosen based on FIT_SCRIPT_PROP. * * Executes a U-Boot script at a particular address in memory. The script should * have a header (FIT or legacy) with the script type (IH_TYPE_SCRIPT). * - * @addr: Address of script - * @fit_uname: FIT subimage name + * If @fit_uname is the empty string, then the default image is used. If + * @confname is the empty string, the default config is used. If @confname and + * @fit_uname are both non-%NULL, then @confname is ignored. If @confname and + * @fit_uname are both %NULL, then first the default config is tried, and then + * the default image. + * * Return: result code (enum command_ret_t) */ -int image_source_script(ulong addr, const char *fit_uname); +int image_source_script(ulong addr, const char *fit_uname, + const char *confname); /** * fit_get_node_from_config() - Look up an image a FIT by type @@ -1031,6 +1040,7 @@ int booti_setup(ulong image, ulong *relocated_addr, ulong *size, #define FIT_FPGA_PROP "fpga" #define FIT_FIRMWARE_PROP "firmware" #define FIT_STANDALONE_PROP "standalone" +#define FIT_SCRIPT_PROP "script" #define FIT_PHASE_PROP "phase" #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE @@ -1258,7 +1268,14 @@ int fit_image_verify_with_data(const void *fit, int image_noffset, size_t size); int fit_image_verify(const void *fit, int noffset); +#if CONFIG_IS_ENABLED(FIT_SIGNATURE) int fit_config_verify(const void *fit, int conf_noffset); +#else +static inline int fit_config_verify(const void *fit, int conf_noffset) +{ + return 0; +} +#endif int fit_all_image_verify(const void *fit); int fit_config_decrypt(const void *fit, int conf_noffset); int fit_image_check_os(const void *fit, int noffset, uint8_t os); diff --git a/include/k3-clk.h b/include/k3-clk.h index 371f077c447..49ba53d20f7 100644 --- a/include/k3-clk.h +++ b/include/k3-clk.h @@ -175,6 +175,7 @@ extern const struct ti_k3_clk_platdata j721e_clk_platdata; extern const struct ti_k3_clk_platdata j7200_clk_platdata; extern const struct ti_k3_clk_platdata j721s2_clk_platdata; extern const struct ti_k3_clk_platdata am62x_clk_platdata; +extern const struct ti_k3_clk_platdata am62ax_clk_platdata; struct clk *clk_register_ti_pll(const char *name, const char *parent_name, void __iomem *reg); diff --git a/include/k3-dev.h b/include/k3-dev.h index 87e873b9ced..d288ae3be73 100644 --- a/include/k3-dev.h +++ b/include/k3-dev.h @@ -79,6 +79,7 @@ extern const struct ti_k3_pd_platdata j721e_pd_platdata; extern const struct ti_k3_pd_platdata j7200_pd_platdata; extern const struct ti_k3_pd_platdata j721s2_pd_platdata; extern const struct ti_k3_pd_platdata am62x_pd_platdata; +extern const struct ti_k3_pd_platdata am62ax_pd_platdata; u8 ti_pd_state(struct ti_pd *pd); u8 lpsc_get_state(struct ti_lpsc *lpsc); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7774c17ad5d..aeb38dec2e0 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -691,7 +691,6 @@ static inline bool nanddev_io_iter_end(struct nand_device *nand, bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos); bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos); -int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos); int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos); /* BBT related functions */ diff --git a/include/net.h b/include/net.h index 1a99009959d..ee08f3307ec 100644 --- a/include/net.h +++ b/include/net.h @@ -101,7 +101,6 @@ enum eth_state_t { ETH_STATE_ACTIVE }; -#ifdef CONFIG_DM_ETH /** * struct eth_pdata - Platform data for Ethernet MAC controllers * @@ -180,76 +179,6 @@ unsigned char *eth_get_ethaddr(void); /* get the current device MAC */ int eth_is_active(struct udevice *dev); /* Test device for active state */ int eth_init_state_only(void); /* Set active state */ void eth_halt_state_only(void); /* Set passive state */ -#endif - -#ifndef CONFIG_DM_ETH -struct eth_device { -#define ETH_NAME_LEN 20 - char name[ETH_NAME_LEN]; - unsigned char enetaddr[ARP_HLEN]; - phys_addr_t iobase; - int state; - - int (*init)(struct eth_device *eth, struct bd_info *bd); - int (*send)(struct eth_device *, void *packet, int length); - int (*recv)(struct eth_device *); - void (*halt)(struct eth_device *); - int (*mcast)(struct eth_device *, const u8 *enetaddr, int join); - int (*write_hwaddr)(struct eth_device *eth); - struct eth_device *next; - int index; - void *priv; -}; - -int eth_register(struct eth_device *dev);/* Register network device */ -int eth_unregister(struct eth_device *dev);/* Remove network device */ - -extern struct eth_device *eth_current; - -static __always_inline struct eth_device *eth_get_dev(void) -{ - return eth_current; -} -struct eth_device *eth_get_dev_by_name(const char *devname); -struct eth_device *eth_get_dev_by_index(int index); /* get dev @ index */ - -/* get the current device MAC */ -static inline unsigned char *eth_get_ethaddr(void) -{ - if (eth_current) - return eth_current->enetaddr; - return NULL; -} - -/* Used only when NetConsole is enabled */ -int eth_is_active(struct eth_device *dev); /* Test device for active state */ -/* Set active state */ -static __always_inline int eth_init_state_only(void) -{ - eth_get_dev()->state = ETH_STATE_ACTIVE; - - return 0; -} -/* Set passive state */ -static __always_inline void eth_halt_state_only(void) -{ - eth_get_dev()->state = ETH_STATE_PASSIVE; -} - -/* - * Set the hardware address for an ethernet interface based on 'eth%daddr' - * environment variable (or just 'ethaddr' if eth_number is 0). - * Args: - * base_name - base name for device (normally "eth") - * eth_number - value of %d (0 for first device of this type) - * Returns: - * 0 is success, non-zero is error status from driver. - */ -int eth_write_hwaddr(struct eth_device *dev, const char *base_name, - int eth_number); - -int usb_eth_initialize(struct bd_info *bi); -#endif int eth_initialize(void); /* Initialize network subsystem */ void eth_try_another(int first_restart); /* Change the device */ diff --git a/include/netdev.h b/include/netdev.h index b3f8584e900..2b4e474ed08 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -70,7 +70,6 @@ int sh_eth_initialize(struct bd_info *bis); int skge_initialize(struct bd_info *bis); int smc91111_initialize(u8 dev_num, phys_addr_t base_addr); int smc911x_initialize(u8 dev_num, phys_addr_t base_addr); -int uec_standard_init(struct bd_info *bis); int uli526x_initialize(struct bd_info *bis); int armada100_fec_register(unsigned long base_addr); diff --git a/include/ns16550.h b/include/ns16550.h index 0ee5c4d6de7..f45fc8cecc5 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -26,7 +26,7 @@ #include <linux/types.h> -#if defined(CONFIG_DM_SERIAL) && !defined(CONFIG_SYS_NS16550_REG_SIZE) +#if CONFIG_IS_ENABLED(DM_SERIAL) && !defined(CONFIG_SYS_NS16550_REG_SIZE) /* * For driver model we always use one byte per register, and sort out the * differences in the driver @@ -37,10 +37,10 @@ #ifdef CONFIG_NS16550_DYNAMIC #define UART_REG(x) unsigned char x #else -#if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0) -#error "Please define NS16550 registers size." -#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_DM_SERIAL) +#if defined(CONFIG_SYS_NS16550_MEM32) && !CONFIG_IS_ENABLED(DM_SERIAL) #define UART_REG(x) u32 x +#elif !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0) +#error "Please define NS16550 registers size." #elif (CONFIG_SYS_NS16550_REG_SIZE > 0) #define UART_REG(x) \ unsigned char prepad_##x[CONFIG_SYS_NS16550_REG_SIZE - 1]; \ @@ -113,7 +113,7 @@ struct ns16550 { UART_REG(scr); /* 10*/ UART_REG(ssr); /* 11*/ #endif -#ifdef CONFIG_DM_SERIAL +#if CONFIG_IS_ENABLED(DM_SERIAL) struct ns16550_plat *plat; #endif }; diff --git a/include/phy.h b/include/phy.h index ff69536fca7..87aa86c2e78 100644 --- a/include/phy.h +++ b/include/phy.h @@ -138,12 +138,8 @@ struct phy_device { struct phy_driver *drv; void *priv; -#ifdef CONFIG_DM_ETH struct udevice *dev; ofnode node; -#else - struct eth_device *dev; -#endif /* forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg) @@ -233,8 +229,6 @@ static inline struct phy_device *fixed_phy_create(ofnode node) #endif -#ifdef CONFIG_DM_ETH - /** * phy_connect_dev() - Associates the given pair of PHY and Ethernet devices * @phydev: PHY device @@ -293,41 +287,6 @@ static inline ofnode phy_get_ofnode(struct phy_device *phydev) else return dev_ofnode(phydev->dev); } -#else - -/** - * phy_connect_dev() - Associates the given pair of PHY and Ethernet devices - * @phydev: PHY device - * @dev: Ethernet device - * @interface: type of MAC-PHY interface - */ -void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev, - phy_interface_t interface); - -/** - * phy_connect() - Creates a PHY device for the Ethernet interface - * Creates a PHY device for the PHY at the given address, if one doesn't exist - * already, and associates it with the Ethernet device. - * The function may be called with addr <= 0, in this case addr value is ignored - * and the bus is scanned to detect a PHY. Scanning should only be used if only - * one PHY is expected to be present on the MDIO bus, otherwise it is undefined - * which PHY is returned. - * - * @bus: MII/MDIO bus that hosts the PHY - * @addr: PHY address on MDIO bus - * @dev: Ethernet device to associate to the PHY - * @interface: type of MAC-PHY interface - * @return: pointer to phy_device if a PHY is found, or NULL otherwise - */ -struct phy_device *phy_connect(struct mii_dev *bus, int addr, - struct eth_device *dev, - phy_interface_t interface); - -static inline ofnode phy_get_ofnode(struct phy_device *phydev) -{ - return ofnode_null(); -} -#endif int phy_read(struct phy_device *phydev, int devad, int regnum); int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val); diff --git a/include/post.h b/include/post.h index e68d5c89020..41120695064 100644 --- a/include/post.h +++ b/include/post.h @@ -17,8 +17,8 @@ #if defined(CONFIG_POST) #ifndef CFG_POST_EXTERNAL_WORD_FUNCS -#ifdef CONFIG_SYS_POST_WORD_ADDR -#define _POST_WORD_ADDR CONFIG_SYS_POST_WORD_ADDR +#ifdef CFG_SYS_POST_WORD_ADDR +#define _POST_WORD_ADDR CFG_SYS_POST_WORD_ADDR #else #if defined(CONFIG_ARCH_MPC8360) @@ -34,7 +34,7 @@ #ifndef _POST_WORD_ADDR #error "_POST_WORD_ADDR currently not implemented for this platform!" #endif -#endif /* CONFIG_SYS_POST_WORD_ADDR */ +#endif /* CFG_SYS_POST_WORD_ADDR */ static inline ulong post_word_load (void) { @@ -140,29 +140,29 @@ extern int memory_post_test(int flags); #endif /* __GNUC__ */ #endif /* __ASSEMBLY__ */ -#define CONFIG_SYS_POST_RTC 0x00000001 -#define CONFIG_SYS_POST_WATCHDOG 0x00000002 +#define CFG_SYS_POST_RTC 0x00000001 +#define CFG_SYS_POST_WATCHDOG 0x00000002 #define CFG_SYS_POST_MEMORY 0x00000004 -#define CONFIG_SYS_POST_CPU 0x00000008 -#define CONFIG_SYS_POST_I2C 0x00000010 -#define CONFIG_SYS_POST_CACHE 0x00000020 -#define CONFIG_SYS_POST_UART 0x00000040 -#define CONFIG_SYS_POST_ETHER 0x00000080 -#define CONFIG_SYS_POST_USB 0x00000200 -#define CONFIG_SYS_POST_SPR 0x00000400 -#define CONFIG_SYS_POST_SYSMON 0x00000800 -#define CONFIG_SYS_POST_DSP 0x00001000 -#define CONFIG_SYS_POST_OCM 0x00002000 -#define CONFIG_SYS_POST_FPU 0x00004000 -#define CONFIG_SYS_POST_ECC 0x00008000 -#define CONFIG_SYS_POST_BSPEC1 0x00010000 -#define CONFIG_SYS_POST_BSPEC2 0x00020000 -#define CONFIG_SYS_POST_BSPEC3 0x00040000 -#define CONFIG_SYS_POST_BSPEC4 0x00080000 -#define CONFIG_SYS_POST_BSPEC5 0x00100000 -#define CONFIG_SYS_POST_CODEC 0x00200000 -#define CONFIG_SYS_POST_COPROC 0x00400000 -#define CONFIG_SYS_POST_FLASH 0x00800000 +#define CFG_SYS_POST_CPU 0x00000008 +#define CFG_SYS_POST_I2C 0x00000010 +#define CFG_SYS_POST_CACHE 0x00000020 +#define CFG_SYS_POST_UART 0x00000040 +#define CFG_SYS_POST_ETHER 0x00000080 +#define CFG_SYS_POST_USB 0x00000200 +#define CFG_SYS_POST_SPR 0x00000400 +#define CFG_SYS_POST_SYSMON 0x00000800 +#define CFG_SYS_POST_DSP 0x00001000 +#define CFG_SYS_POST_OCM 0x00002000 +#define CFG_SYS_POST_FPU 0x00004000 +#define CFG_SYS_POST_ECC 0x00008000 +#define CFG_SYS_POST_BSPEC1 0x00010000 +#define CFG_SYS_POST_BSPEC2 0x00020000 +#define CFG_SYS_POST_BSPEC3 0x00040000 +#define CFG_SYS_POST_BSPEC4 0x00080000 +#define CFG_SYS_POST_BSPEC5 0x00100000 +#define CFG_SYS_POST_CODEC 0x00200000 +#define CFG_SYS_POST_COPROC 0x00400000 +#define CFG_SYS_POST_FLASH 0x00800000 #define CFG_SYS_POST_MEM_REGIONS 0x01000000 #endif /* CONFIG_POST */ diff --git a/include/pxe_utils.h b/include/pxe_utils.h index 4a73b2aace3..1e5e8424f53 100644 --- a/include/pxe_utils.h +++ b/include/pxe_utils.h @@ -28,6 +28,7 @@ * Create these with the 'label_create' function given below. * * name - the name of the menu as given on the 'menu label' line. + * kernel_label - the kernel label, including FIT config if present. * kernel - the path to the kernel file to use for this label. * append - kernel command line to use when booting this label * initrd - path to the initrd to use for this label. @@ -40,6 +41,7 @@ struct pxe_label { char num[4]; char *name; char *menu; + char *kernel_label; char *kernel; char *config; char *append; diff --git a/include/rtc.h b/include/rtc.h index 10104e3bf5a..b6fdbb60dc2 100644 --- a/include/rtc.h +++ b/include/rtc.h @@ -15,13 +15,12 @@ #include <bcd.h> #include <rtc_def.h> +#include <linux/errno.h> typedef int64_t time64_t; - -#ifdef CONFIG_DM_RTC - struct udevice; +#if CONFIG_IS_ENABLED(DM_RTC) struct rtc_ops { /** * get() - get the current time @@ -222,6 +221,33 @@ int rtc_enable_32khz_output(int busnum, int chip_addr); #endif #else +static inline int dm_rtc_get(struct udevice *dev, struct rtc_time *time) +{ + return -ENOSYS; +} + +static inline int dm_rtc_set(struct udevice *dev, struct rtc_time *time) +{ + return -ENOSYS; +} + +static inline int dm_rtc_reset(struct udevice *dev) +{ + return -ENOSYS; +} + +static inline int dm_rtc_read(struct udevice *dev, unsigned int reg, u8 *buf, + unsigned int len) +{ + return -ENOSYS; +} + +static inline int dm_rtc_write(struct udevice *dev, unsigned int reg, + const u8 *buf, unsigned int len) +{ + return -ENOSYS; +} + int rtc_get (struct rtc_time *); int rtc_set (struct rtc_time *); void rtc_reset (void); diff --git a/include/semihosting.h b/include/semihosting.h index f1f73464e4f..4e844cbad87 100644 --- a/include/semihosting.h +++ b/include/semihosting.h @@ -17,6 +17,17 @@ #define SMH_T32_SVC 0xDFAB #define SMH_T32_HLT 0xBABC +/** + * smh_trap() - ARCH-specific semihosting call. + * + * Semihosting library/driver can use this function to do the + * actual semihosting calls. + * + * Return: Error code defined by semihosting spec. + */ + +long smh_trap(unsigned int sysnum, void *addr); + #if CONFIG_IS_ENABLED(SEMIHOSTING_FALLBACK) /** * semihosting_enabled() - Determine whether semihosting is supported diff --git a/include/serial.h b/include/serial.h index f4d7dc58a9e..42bdf3759c0 100644 --- a/include/serial.h +++ b/include/serial.h @@ -14,7 +14,7 @@ struct serial_device { int (*tstc)(void); void (*putc)(const char c); void (*puts)(const char *s); -#if CFG_POST & CONFIG_SYS_POST_UART +#if CFG_POST & CFG_SYS_POST_UART void (*loop)(int); #endif struct serial_device *next; @@ -242,7 +242,7 @@ struct dm_serial_ops { * @return 0 if OK, -ve on error */ int (*clear)(struct udevice *dev); -#if CFG_POST & CONFIG_SYS_POST_UART +#if CFG_POST & CFG_SYS_POST_UART /** * loop() - Control serial device loopback mode * diff --git a/include/tsec.h b/include/tsec.h index de279b21171..153337837a9 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -19,56 +19,6 @@ #define TSEC_MDIO_REGS_OFFSET 0x520 -#ifndef CONFIG_DM_ETH - -#ifdef CONFIG_ARCH_LS1021A -#define TSEC_SIZE 0x40000 -#define TSEC_MDIO_OFFSET 0x40000 -#else -#define TSEC_SIZE 0x01000 -#define TSEC_MDIO_OFFSET 0x01000 -#endif - -#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + TSEC_MDIO_REGS_OFFSET) - -#define TSEC_GET_REGS(num, offset) \ - (struct tsec __iomem *)\ - (TSEC_BASE_ADDR + (((num) - 1) * (offset))) - -#define TSEC_GET_REGS_BASE(num) \ - TSEC_GET_REGS((num), TSEC_SIZE) - -#define TSEC_GET_MDIO_REGS(num, offset) \ - (struct tsec_mii_mng __iomem *)\ - (CONFIG_SYS_MDIO_BASE_ADDR + ((num) - 1) * (offset)) - -#define TSEC_GET_MDIO_REGS_BASE(num) \ - TSEC_GET_MDIO_REGS((num), TSEC_MDIO_OFFSET) - -#define DEFAULT_MII_NAME "FSL_MDIO" - -#define STD_TSEC_INFO(num) \ -{ \ - .regs = TSEC_GET_REGS_BASE(num), \ - .miiregs_sgmii = TSEC_GET_MDIO_REGS_BASE(num), \ - .devname = CONFIG_TSEC##num##_NAME, \ - .phyaddr = TSEC##num##_PHY_ADDR, \ - .flags = TSEC##num##_FLAGS, \ - .mii_devname = DEFAULT_MII_NAME \ -} - -#define SET_STD_TSEC_INFO(x, num) \ -{ \ - x.regs = TSEC_GET_REGS_BASE(num); \ - x.miiregs_sgmii = TSEC_GET_MDIO_REGS_BASE(num); \ - x.devname = CONFIG_TSEC##num##_NAME; \ - x.phyaddr = TSEC##num##_PHY_ADDR; \ - x.flags = TSEC##num##_FLAGS;\ - x.mii_devname = DEFAULT_MII_NAME;\ -} - -#endif /* CONFIG_DM_ETH */ - #define MAC_ADDR_LEN 6 /* #define TSEC_TIMEOUT 1000000 */ @@ -414,11 +364,7 @@ struct tsec_private { u32 flags; uint rx_idx; /* index of the current RX buffer */ uint tx_idx; /* index of the current TX buffer */ -#ifndef CONFIG_DM_ETH - struct eth_device *dev; -#else struct udevice *dev; -#endif }; struct tsec_info_struct { @@ -431,10 +377,4 @@ struct tsec_info_struct { u32 flags; }; -#ifndef CONFIG_DM_ETH -int tsec_standard_init(struct bd_info *bis); -int tsec_eth_init(struct bd_info *bis, struct tsec_info_struct *tsec_info, - int num); -#endif - #endif /* __TSEC_H */ diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h index 0770228cd89..6da348eb628 100644 --- a/include/ubi_uboot.h +++ b/include/ubi_uboot.h @@ -34,28 +34,6 @@ #include <linux/errno.h> -/* configurable */ -#define CONFIG_MTD_UBI_BEB_RESERVE 1 - -/* debug options (Linux: drivers/mtd/ubi/Kconfig.debug) */ -#undef CONFIG_MTD_UBI_DEBUG -#undef CONFIG_MTD_UBI_DEBUG_PARANOID -#undef CONFIG_MTD_UBI_DEBUG_MSG -#undef CONFIG_MTD_UBI_DEBUG_MSG_EBA -#undef CONFIG_MTD_UBI_DEBUG_MSG_WL -#undef CONFIG_MTD_UBI_DEBUG_MSG_IO -#undef CONFIG_MTD_UBI_DEBUG_MSG_BLD - -#undef CONFIG_MTD_UBI_BLOCK - -/* ubi_init() disables returning error codes when built into the Linux - * kernel so that it doesn't hang the Linux kernel boot process. Since - * the U-Boot driver code depends on getting valid error codes from this - * function we just tell the UBI layer that we are building as a module - * (which only enables the additional error reporting). - */ -#define CONFIG_MTD_UBI_MODULE - /* build.c */ #define get_device(...) #define put_device(...) diff --git a/include/usb.h b/include/usb.h index 7e3796bd5ba..80cb8467203 100644 --- a/include/usb.h +++ b/include/usb.h @@ -809,21 +809,6 @@ struct dm_usb_ops { #define usb_get_emul_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops) /** - * usb_get_dev_index() - look up a device index number - * - * Look up devices using their index number (starting at 0). This works since - * in U-Boot device addresses are allocated starting at 1 with no gaps. - * - * TODO(sjg@chromium.org): Remove this function when usb_ether.c is modified - * to work better with driver model. - * - * @bus: USB bus to check - * @index: Index number of device to find (0=first). This is just the - * device address less 1. - */ -struct usb_device *usb_get_dev_index(struct udevice *bus, int index); - -/** * usb_setup_device() - set up a device ready for use * * @dev: USB device pointer. This need not be a real device - it is diff --git a/include/usb_ether.h b/include/usb_ether.h index 8c7bd069064..18d7184711b 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -8,19 +8,13 @@ #include <net.h> -/* TODO(sjg@chromium.org): Remove @pusb_dev when all boards use CONFIG_DM_ETH */ +/* TODO(sjg@chromium.org): Remove @pusb_dev now that all boards use CONFIG_DM_ETH */ struct ueth_data { /* eth info */ -#ifdef CONFIG_DM_ETH uint8_t *rxbuf; int rxsize; int rxlen; /* Total bytes available in rxbuf */ int rxptr; /* Current position in rxbuf */ -#else - struct eth_device eth_dev; /* used with eth_register */ - /* driver private */ - void *dev_priv; -#endif int phy_id; /* mii phy id */ /* usb info */ @@ -34,7 +28,6 @@ struct ueth_data { unsigned char irqinterval; /* Intervall for IRQ Pipe */ }; -#ifdef CONFIG_DM_ETH /** * usb_ether_register() - register a new USB ethernet device * @@ -92,40 +85,5 @@ int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp); * @num_bytes: Number of bytes to skip, or -1 to skip all bytes */ void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes); -#else -/* - * Function definitions for each USB ethernet driver go here - * (declaration is unconditional, compilation is conditional) - */ -void asix_eth_before_probe(void); -int asix_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); - -void ax88179_eth_before_probe(void); -int ax88179_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int ax88179_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); - -void mcs7830_eth_before_probe(void); -int mcs7830_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int mcs7830_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); - -void smsc95xx_eth_before_probe(void); -int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); - -void r8152_eth_before_probe(void); -int r8152_eth_probe(struct usb_device *dev, unsigned int ifnum, - struct ueth_data *ss); -int r8152_eth_get_info(struct usb_device *dev, struct ueth_data *ss, - struct eth_device *eth); -#endif #endif /* __USB_ETHER_H__ */ diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h index 9a503874511..641b4a3e6f2 100644 --- a/include/usbdescriptors.h +++ b/include/usbdescriptors.h @@ -227,21 +227,6 @@ struct usb_device_descriptor { u8 bNumConfigurations; } __attribute__ ((packed)); -#if defined(CONFIG_USBD_HS) -struct usb_qualifier_descriptor { - u8 bLength; - u8 bDescriptorType; - - u16 bcdUSB; - u8 bDeviceClass; - u8 bDeviceSubClass; - u8 bDeviceProtocol; - u8 bMaxPacketSize0; - u8 bNumConfigurations; - u8 breserved; -} __attribute__ ((packed)); -#endif - struct usb_string_descriptor { u8 bLength; u8 bDescriptorType; /* 0x03 */ diff --git a/include/usbdevice.h b/include/usbdevice.h index 611cd6e4abf..80c5af0cbcd 100644 --- a/include/usbdevice.h +++ b/include/usbdevice.h @@ -196,10 +196,6 @@ struct usb_bus_instance; #define USB_DT_INTERFACE 0x04 #define USB_DT_ENDPOINT 0x05 -#if defined(CONFIG_USBD_HS) -#define USB_DT_QUAL 0x06 -#endif - #define USB_DT_HID (USB_TYPE_CLASS | 0x01) #define USB_DT_REPORT (USB_TYPE_CLASS | 0x02) #define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) @@ -279,11 +275,7 @@ struct usb_bus_instance; * USB Spec Release number */ -#if defined(CONFIG_USBD_HS) -#define USB_BCD_VERSION 0x0200 -#else #define USB_BCD_VERSION 0x0110 -#endif /* @@ -552,9 +544,6 @@ struct usb_device_instance { /* generic */ char *name; struct usb_device_descriptor *device_descriptor; /* per device descriptor */ -#if defined(CONFIG_USBD_HS) - struct usb_qualifier_descriptor *qualifier_descriptor; -#endif void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data); @@ -644,14 +633,6 @@ struct usb_string_descriptor *usbd_get_string (u8); struct usb_device_descriptor *usbd_device_device_descriptor(struct usb_device_instance *, int); -#if defined(CONFIG_USBD_HS) -/* - * is_usbd_high_speed routine needs to be defined by specific gadget driver - * It returns true if device enumerates at High speed - * Retuns false otherwise - */ -int is_usbd_high_speed(void); -#endif int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint); void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad); void usbd_tx_complete (struct usb_endpoint_instance *endpoint); diff --git a/include/valgrind/valgrind.h b/include/valgrind/valgrind.h index e59a7fde321..5d4fa5f43b4 100644 --- a/include/valgrind/valgrind.h +++ b/include/valgrind/valgrind.h @@ -121,7 +121,9 @@ #else /* If we're not compiling for our target platform, don't generate any inline asms. */ -# undef CONFIG_VALGRIND +# if IS_ENABLED(CONFIG_VALGRIND) +# error "Unsupported platform for valgrind" +# endif #endif |