diff options
Diffstat (limited to 'include')
56 files changed, 2114 insertions, 229 deletions
diff --git a/include/config_defaults.h b/include/config_defaults.h index 7ef928bbe14..4ed09683b65 100644 --- a/include/config_defaults.h +++ b/include/config_defaults.h @@ -16,7 +16,4 @@ #define CONFIG_BOOTM_RTEMS 1 #define CONFIG_BOOTM_VXWORKS 1 -#define CONFIG_GZIP 1 -#define CONFIG_ZLIB 1 - #endif diff --git a/include/configs/alt.h b/include/configs/alt.h index 3f7f379e06c..3a515eef00e 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -39,7 +39,8 @@ #define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootm_size=0x10000000\0" + "bootm_size=0x10000000\0" \ + "usb_pgood_delay=2000\0" /* SPL support */ #define CONFIG_SPL_TEXT_BASE 0xe6300000 diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h new file mode 100644 index 00000000000..8bde1983134 --- /dev/null +++ b/include/configs/am335x_guardian.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * am335x_guardian_.h + * + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + * Copyright (C) 2018 sjoerd Simons <sjoerd.simons@collabora.co.uk> + * + */ + +#ifndef __CONFIG_AM335X_GUARDIAN_H +#define __CONFIG_AM335X_GUARDIAN_H + +#include <configs/ti_am335x_common.h> + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_TIMESTAMP +#endif + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +#ifndef CONFIG_SPL_BUILD + +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x80000000\0" \ + "pxefile_addr_r=0x80100000\0" \ + "kernel_addr_r=0x82000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "ramdisk_addr_r=0x88080000\0" \ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(UBIFS, ubifs, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#define AM335XX_BOARD_FDTFILE "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" + +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + AM335XX_BOARD_FDTFILE \ + MEM_LAYOUT_ENV_SETTINGS \ + BOOTENV \ + "bootlimit=3\0" \ + "altbootcmd=" \ + "setenv boot_config \"extlinux-rollback.conf\"; " \ + "run distro_bootcmd\0" + +#endif /* CONFIG_SPL_BUILD */ + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ + +/* PMIC support */ +#define CONFIG_POWER_TPS65217 + +/* Bootcount using the RTC block */ +#define CONFIG_SYS_BOOTCOUNT_LE + +#ifdef CONFIG_NAND +#define CONFIG_ENV_OFFSET 0x300000 +#define CONFIG_ENV_OFFSET_REDUND 0x340000 +#define CONFIG_ENV_SIZE 0x040000 + +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 4096 +#define CONFIG_SYS_NAND_OOBSIZE 256 +#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) + +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ + 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ + 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ + 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ + 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ + 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ + 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ + 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ + } +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 26 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW +#define MTDIDS_DEFAULT "nand0=nand.0" + +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS + +#endif /* CONFIG_NAND */ + +#endif /* ! __CONFIG_AM335X_GUARDIAN_H */ diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index c51cf284502..9f8d3cc9e5e 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -21,8 +21,6 @@ * Commands configuration */ -/* SPI NOR flash default params, used by sf commands */ - /* * SDIO/MMC Card Configuration */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 5dd5c28e08a..749a67d4b08 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -139,4 +139,7 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + #endif diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 583f9948072..94848f5128b 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -48,7 +48,8 @@ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - +#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE +#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000 /* memtest start addr */ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index 55968c2749e..63194d58a29 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -32,8 +32,6 @@ #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 -/* SPI NOR flash default params, used by sf commands */ - /* Environment in SPI NOR flash */ #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h index f1bdc2d3e74..2fdc8450292 100644 --- a/include/configs/db-88f6820-amc.h +++ b/include/configs/db-88f6820-amc.h @@ -16,8 +16,6 @@ * Commands configuration */ -/* SPI NOR flash default params, used by sf commands */ - /* USB/EHCI configuration */ #define CONFIG_EHCI_IS_TDI diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index d378052a8f7..ec2405bbb45 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -24,12 +24,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* - * SPI Flash configuration for the environemnt access - */ - -/* SPI NOR flash default params, used by sf commands */ - -/* * SDIO/MMC Card Configuration */ #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index b78dbcb6b94..1f9d24b19b9 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -29,8 +29,6 @@ #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 -/* SPI NOR flash default params, used by sf commands */ - /* Environment in SPI NOR flash */ #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h new file mode 100644 index 00000000000..0f75ad71859 --- /dev/null +++ b/include/configs/db-xc3-24g4xg.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + */ + +#ifndef _CONFIG_DB_XC3_24G4G_H +#define _CONFIG_DB_XC3_24G4G_H + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg +#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ + +/* NAND */ +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" +#undef CONFIG_SYS_MAXARGS +#define CONFIG_SYS_MAXARGS 96 + +#endif /* _CONFIG_DB_XC3_24G4G_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 10eac20aa0c..7441f4a69de 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -133,7 +133,7 @@ 50, 51, 52, 53, 54, 55, 56, 57, } #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00140000 /* NAND: SPL related configs */ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 275a2b47880..192c055c5cc 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -28,8 +28,6 @@ #define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SPEED 100000 -/* SPI NOR flash default params, used by sf commands */ - /* Environment in SPI NOR flash */ #define CONFIG_ENV_OFFSET 0x7E0000 /* RedBoot config partition in DTS */ #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h new file mode 100644 index 00000000000..e9a06e6d003 --- /dev/null +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2012 Atmel Corporation + * Copyright (C) 2019 Stefan Roese <sr@denx.de> + * + * Configuation settings for the GARDENA smart Gateway (AT91SAM9G25) + */ + +#ifndef __CONFIG_H__ +#define __CONFIG_H__ + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif +#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) + +/* NAND flash */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE BIT(21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE BIT(22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +/* environment organization */ +#define CONFIG_ENV_UBI_PART "ubi" +#define CONFIG_ENV_UBI_VOLUME "env" +#define CONFIG_ENV_UBI_VOLUME_REDUND "env_r" +#define CONFIG_ENV_SIZE (64 << 10) + +/* SPL */ +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x7000 +#define CONFIG_SPL_STACK 0x308000 + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_RAW_ONLY +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000 +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 + +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + +#endif diff --git a/include/configs/helios4.h b/include/configs/helios4.h index df4d8bcb3bb..b2badab15ea 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -23,8 +23,6 @@ * Commands configuration */ -/* SPI NOR flash default params, used by sf commands */ - /* * SDIO/MMC Card Configuration */ diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index 2c0e4cbe92f..547127490c9 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -40,10 +40,6 @@ #include <configs/ti_armv7_keystone2.h> -/* SPL SPI Loader Configuration */ -#define CONFIG_SPL_TEXT_BASE 0x0c100000 - - #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* NAND Configuration */ diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index b1aec98a372..3ec5a5acf5f 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -72,9 +72,6 @@ "bootm ${fit_loadaddr}#${name_fdt}" #endif -/* SPL SPI Loader Configuration */ -#define CONFIG_SPL_TEXT_BASE 0x0c0a0000 - /* NAND Configuration */ #define CONFIG_SYS_NAND_PAGE_2K diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 0b909a1bf6f..d4f2e96bab0 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -40,9 +40,6 @@ #include <configs/ti_armv7_keystone2.h> -/* SPL SPI Loader Configuration */ -#define CONFIG_SPL_TEXT_BASE 0x0c200000 - #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* NAND Configuration */ diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index 59e6b096733..cfdb36e2d7f 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -40,9 +40,6 @@ #include <configs/ti_armv7_keystone2.h> -/* SPL SPI Loader Configuration */ -#define CONFIG_SPL_TEXT_BASE 0x0c100000 - #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* NAND Configuration */ diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 72e62658d0c..55c4e633254 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -76,9 +76,9 @@ "kernel_addr=0x00800000\0" \ "ramdisk_addr=0x01000000\0" \ "fdt_addr=0x00ff0000\0" \ - "bootcmd_legacy=ide reset " \ - "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \ - "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ + "bootcmd_legacy=sata init " \ + "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\ + "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ "&& tftpboot ${ramdisk_addr} initrd.img " \ @@ -86,11 +86,11 @@ "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ "&& bootz ${kernel_addr} " \ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ - "bootcmd_hdd=ide reset " \ - "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \ - "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \ + "bootcmd_hdd=sata init " \ + "&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \ + "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \ "&& setenv ramdisk_len ${filesize} " \ - "&& load ide ${hdpart} ${fdt_addr} /dtb " \ + "&& load sata ${hdpart} ${fdt_addr} /dtb " \ "&& bootz ${kernel_addr} " \ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ "bootcmd_usb=usb start " \ @@ -131,13 +131,10 @@ #undef CONFIG_RESET_PHY_R #endif /* CONFIG_CMD_NET */ -#ifdef CONFIG_IDE -#undef CONFIG_SYS_IDE_MAXBUS -#define CONFIG_SYS_IDE_MAXBUS 1 -#undef CONFIG_SYS_IDE_MAXDEVICE -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#ifdef CONFIG_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_SYS_64BIT_LBA +#define CONFIG_LBA48 #endif #endif /* _CONFIG_LSXL_H */ diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index f4972b64dcb..b28f3b94085 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -49,10 +49,6 @@ /* End of 16M scrubbed by training in bootrom */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) -/* - * SPI Flash configuration - */ - #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 1786e099ad4..6680c3e5037 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -43,6 +43,9 @@ #define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ +#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE +#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000 + /* memtest start addr */ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 46b80308949..e34873cea7d 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -15,110 +15,119 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45" - -#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45 - /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ - -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_SKIP_LOWLEVEL_INIT -/* - * Hardware drivers - */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -#define CONFIG_SYS_USE_NANDFLASH 1 - -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED GPIO_PIN_PD(31) /* this is the user1 led */ -#define CONFIG_GREEN_LED GPIO_PIN_PD(0) /* this is the user2 led */ - +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* * BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 - -#define CONFIG_JFFS2_CMDLINE 1 -#define CONFIG_JFFS2_NAND 1 -#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */ -#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */ +#define CONFIG_BOOTP_BOOTFILESIZE /* SDRAM */ -#define PHYS_SDRAM 0x70000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ +#define CONFIG_SYS_SDRAM_BASE 0x70000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_ALE BIT(21) /* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(3) - +#define CONFIG_SYS_NAND_MASK_CLE BIT(22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD3 +#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT #endif /* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_UPLL -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* board specific(not enough SRAM) */ -#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000 - -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE - -/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" +#define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_NAND_BOOT +/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_OFFSET 0x140000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 + +#define CONFIG_BOOTCOMMAND \ + "nand read 0x70000000 0x200000 0x300000;" \ + "bootm 0x70000000" +#elif CONFIG_SD_BOOT +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ + "fatload mmc 0:1 0x72000000 zImage; " \ + "bootz 0x72000000 - 0x71000000" +#endif /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\ - 0x1000) +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ + 128 * 1024, 0x1000) + +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x010000 +#define CONFIG_SPL_STACK 0x310000 + +#define CONFIG_SYS_MONITOR_LEN 0x80000 + +#ifdef CONFIG_SD_BOOT + +#define CONFIG_SPL_BSS_START_ADDR 0x70000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 +#define CONFIG_SYS_SPL_MALLOC_START 0x70080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 + +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" + +#elif CONFIG_NAND_BOOT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SPL_NAND_SOFTECC +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE + +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCSIZE 256 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ + 48, 49, 50, 51, 52, 53, 54, 55, \ + 56, 57, 58, 59, 60, 61, 62, 63, } +#endif -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SPL_ATMEL_SIZE +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 #endif diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 28af575bf20..f95b29480d7 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -221,4 +221,8 @@ #define CONFIG_SYS_ICACHE_OFF #define CONFIG_SYS_DCACHE_OFF #endif + +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + #endif /* __CONFIG_H */ diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 1d245779934..3582eb2edff 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -173,4 +173,7 @@ #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10193F05 +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + #endif diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 59b2546f0b4..cd92835112d 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -39,8 +39,6 @@ #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 -/* SPI NOR flash default params, used by sf commands */ - /* Environment in SPI NOR flash */ #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index fb8c082c1dc..eeca085f9fc 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -22,7 +22,7 @@ /* Memory Configuration */ #define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 #define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE - \ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_ISW_ENTRY_ADDR - \ GENERATED_GBL_DATA_SIZE) #ifdef CONFIG_SYS_MALLOC_F_LEN @@ -32,9 +32,10 @@ #endif /* SPL SPI Loader Configuration */ +#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR #define CONFIG_SPL_PAD_TO 65536 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \ +#define CONFIG_SPL_BSS_START_ADDR (CONFIG_ISW_ENTRY_ADDR + \ CONFIG_SPL_MAX_SIZE) #define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ @@ -132,9 +133,6 @@ #define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE #define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES -/* SerDes */ -#define CONFIG_TI_KEYSTONE_SERDES - #define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE /* I2C Configuration */ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index ba57c40182c..7c08e47d3d1 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -56,6 +56,7 @@ #include <environment/ti/boot.h> #include <environment/ti/mmc.h> +#include <environment/ti/nand.h> #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ @@ -65,6 +66,7 @@ DEFAULT_FDT_TI_ARGS \ DFUARGS \ NETARGS \ + NANDARGS \ /* * SPL related defines. The Public RAM memory map the ROM defines the @@ -100,7 +102,6 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) - #ifdef CONFIG_SPL_BUILD #undef CONFIG_TIMER #endif diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h index 5d5394e3e53..0de40eddcb5 100644 --- a/include/configs/turris_mox.h +++ b/include/configs/turris_mox.h @@ -63,10 +63,6 @@ #define CONFIG_I2C_MV #define CONFIG_SYS_I2C_SLAVE 0x0 -/* - * SPI Flash configuration - */ - /* Environment in SPI NOR flash */ #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index 038f6398eb6..c7805cf36bf 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -34,9 +34,6 @@ # define CONFIG_WATCHDOG #endif -/* SPI NOR flash default params, used by sf commands */ -#define CONFIG_SPI_FLASH_SPANSION - /* * SDIO/MMC Card Configuration */ diff --git a/include/cpsw.h b/include/cpsw.h index 9f8ce8850f5..96ff254f981 100644 --- a/include/cpsw.h +++ b/include/cpsw.h @@ -16,6 +16,23 @@ #ifndef _CPSW_H_ #define _CPSW_H_ +/* reg offset */ +#define CPSW_HOST_PORT_OFFSET 0x108 +#define CPSW_SLAVE0_OFFSET 0x208 +#define CPSW_SLAVE1_OFFSET 0x308 +#define CPSW_SLAVE_SIZE 0x100 +#define CPSW_CPDMA_OFFSET 0x800 +#define CPSW_HW_STATS 0x900 +#define CPSW_STATERAM_OFFSET 0xa00 +#define CPSW_CPTS_OFFSET 0xc00 +#define CPSW_ALE_OFFSET 0xd00 +#define CPSW_SLIVER0_OFFSET 0xd80 +#define CPSW_SLIVER1_OFFSET 0xdc0 +#define CPSW_BD_OFFSET 0x2000 +#define CPSW_MDIO_DIV 0xff + +#define AM335X_GMII_SEL_OFFSET 0x630 + struct cpsw_slave_data { u32 slave_reg_ofs; u32 sliver_reg_ofs; @@ -50,10 +67,16 @@ struct cpsw_platform_data { u32 active_slave; bool rmii_clock_external; u8 version; + const char *phy_sel_compat; + u32 syscon_addr; + const char *macid_sel_compat; }; int cpsw_register(struct cpsw_platform_data *data); -int ti_cm_get_macid(struct udevice *dev, int slave, u8 *mac_addr); +int ti_cm_get_macid_addr(struct udevice *dev, int slave, + struct cpsw_platform_data *data); +void ti_cm_get_macid(struct udevice *dev, struct cpsw_platform_data *data, + u8 *mac_addr); int cpsw_get_slave_phy_addr(struct udevice *dev, int slave); #endif /* _CPSW_H_ */ diff --git a/include/dt-bindings/clock/r8a7790-cpg-mssr.h b/include/dt-bindings/clock/r8a7790-cpg-mssr.h index 1625b8bf348..c5955b56b36 100644 --- a/include/dt-bindings/clock/r8a7790-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a7790-cpg-mssr.h @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Renesas Electronics Corp. +/* SPDX-License-Identifier: GPL-2.0+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2015 Renesas Electronics Corp. */ #ifndef __DT_BINDINGS_CLOCK_R8A7790_CPG_MSSR_H__ diff --git a/include/dt-bindings/clock/r8a7791-cpg-mssr.h b/include/dt-bindings/clock/r8a7791-cpg-mssr.h index e8823410c01..aadd06c566c 100644 --- a/include/dt-bindings/clock/r8a7791-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a7791-cpg-mssr.h @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Renesas Electronics Corp. +/* SPDX-License-Identifier: GPL-2.0+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2015 Renesas Electronics Corp. */ #ifndef __DT_BINDINGS_CLOCK_R8A7791_CPG_MSSR_H__ diff --git a/include/dt-bindings/clock/r8a7792-cpg-mssr.h b/include/dt-bindings/clock/r8a7792-cpg-mssr.h index 72ce85cb2f9..829c44db027 100644 --- a/include/dt-bindings/clock/r8a7792-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a7792-cpg-mssr.h @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Renesas Electronics Corp. +/* SPDX-License-Identifier: GPL-2.0+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2015 Renesas Electronics Corp. */ #ifndef __DT_BINDINGS_CLOCK_R8A7792_CPG_MSSR_H__ diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h index 7318d45d4e7..49c66d8ed17 100644 --- a/include/dt-bindings/clock/r8a7793-clock.h +++ b/include/dt-bindings/clock/r8a7793-clock.h @@ -1,16 +1,8 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * r8a7793 clock definition * * Copyright (C) 2014 Renesas Electronics Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __DT_BINDINGS_CLOCK_R8A7793_H__ diff --git a/include/dt-bindings/clock/r8a7793-cpg-mssr.h b/include/dt-bindings/clock/r8a7793-cpg-mssr.h index 8809b0f62d6..d1ff646c31f 100644 --- a/include/dt-bindings/clock/r8a7793-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a7793-cpg-mssr.h @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Renesas Electronics Corp. +/* SPDX-License-Identifier: GPL-2.0+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2015 Renesas Electronics Corp. */ #ifndef __DT_BINDINGS_CLOCK_R8A7793_CPG_MSSR_H__ diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index 93e99c3ffc8..649f005782d 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -1,11 +1,7 @@ -/* +/* SPDX-License-Identifier: GPL-2.0+ + * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright 2013 Ideas On Board SPRL - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __DT_BINDINGS_CLOCK_R8A7794_H__ diff --git a/include/dt-bindings/clock/r8a7794-cpg-mssr.h b/include/dt-bindings/clock/r8a7794-cpg-mssr.h index 9d720311ae3..6314e23b51a 100644 --- a/include/dt-bindings/clock/r8a7794-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a7794-cpg-mssr.h @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Renesas Electronics Corp. +/* SPDX-License-Identifier: GPL-2.0+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2015 Renesas Electronics Corp. */ #ifndef __DT_BINDINGS_CLOCK_R8A7794_CPG_MSSR_H__ diff --git a/include/dt-bindings/clock/r8a7795-cpg-mssr.h b/include/dt-bindings/clock/r8a7795-cpg-mssr.h index f047eaf261f..92b3e2a9517 100644 --- a/include/dt-bindings/clock/r8a7795-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a7795-cpg-mssr.h @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Renesas Electronics Corp. +/* SPDX-License-Identifier: GPL-2.0+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2015 Renesas Electronics Corp. */ #ifndef __DT_BINDINGS_CLOCK_R8A7795_CPG_MSSR_H__ #define __DT_BINDINGS_CLOCK_R8A7795_CPG_MSSR_H__ @@ -54,7 +50,7 @@ #define R8A7795_CLK_CANFD 39 #define R8A7795_CLK_HDMI 40 #define R8A7795_CLK_CSI0 41 -#define R8A7795_CLK_CSIREF 42 +/* CLK_CSIREF was removed */ #define R8A7795_CLK_CP 43 #define R8A7795_CLK_CPEX 44 #define R8A7795_CLK_R 45 diff --git a/include/dt-bindings/clock/r8a7796-cpg-mssr.h b/include/dt-bindings/clock/r8a7796-cpg-mssr.h index 1e5942695f0..c0957cf4584 100644 --- a/include/dt-bindings/clock/r8a7796-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a7796-cpg-mssr.h @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2016 Renesas Electronics Corp. +/* SPDX-License-Identifier: GPL-2.0+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2016 Renesas Electronics Corp. */ #ifndef __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__ #define __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__ @@ -60,7 +56,7 @@ #define R8A7796_CLK_CANFD 45 #define R8A7796_CLK_HDMI 46 #define R8A7796_CLK_CSI0 47 -#define R8A7796_CLK_CSIREF 48 +/* CLK_CSIREF was removed */ #define R8A7796_CLK_CP 49 #define R8A7796_CLK_CPEX 50 #define R8A7796_CLK_R 51 diff --git a/include/dt-bindings/clock/r8a77995-cpg-mssr.h b/include/dt-bindings/clock/r8a77995-cpg-mssr.h index 4e8ae3dee59..fd701c4e87c 100644 --- a/include/dt-bindings/clock/r8a77995-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a77995-cpg-mssr.h @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2017 Glider bvba +/* SPDX-License-Identifier: GPL-2.0+ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright (C) 2017 Glider bvba */ #ifndef __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__ #define __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__ @@ -39,8 +35,8 @@ #define R8A77995_CLK_CRD2 24 #define R8A77995_CLK_SD0H 25 #define R8A77995_CLK_SD0 26 -#define R8A77995_CLK_SSP2 27 -#define R8A77995_CLK_SSP1 28 +/* CLK_SSP2 was removed */ +/* CLK_SSP1 was removed */ #define R8A77995_CLK_RPC 29 #define R8A77995_CLK_RPCD2 30 #define R8A77995_CLK_ZA2 31 @@ -53,5 +49,6 @@ #define R8A77995_CLK_LV0 38 #define R8A77995_CLK_LV1 39 #define R8A77995_CLK_CP 40 +#define R8A77995_CLK_CPEX 41 #endif /* __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/dma/k3-udma.h b/include/dt-bindings/dma/k3-udma.h new file mode 100644 index 00000000000..670e1232b48 --- /dev/null +++ b/include/dt-bindings/dma/k3-udma.h @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com + */ + +#ifndef __DT_TI_UDMA_H +#define __DT_TI_UDMA_H + +#define UDMA_TR_MODE 0 +#define UDMA_PKT_MODE 1 + +#define UDMA_DIR_TX 0 +#define UDMA_DIR_RX 1 + +#define PSIL_STATIC_TR_NONE 0 +#define PSIL_STATIC_TR_XY 1 +#define PSIL_STATIC_TR_MCAN 2 + +#define UDMA_PDMA_TR_XY(id) \ + ti,psil-config##id { \ + linux,udma-mode = <UDMA_TR_MODE>; \ + statictr-type = <PSIL_STATIC_TR_XY>; \ + } + +#define UDMA_PDMA_PKT_XY(id) \ + ti,psil-config##id { \ + linux,udma-mode = <UDMA_PKT_MODE>; \ + statictr-type = <PSIL_STATIC_TR_XY>; \ + } + +#endif /* __DT_TI_UDMA_H */ diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index 2732d6c0fb3..616f5ce4007 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -17,6 +17,7 @@ #define AT91_PINCTRL_DIS_SCHMIT (1 << 4) #define AT91_PINCTRL_OUTPUT (1 << 7) #define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8) +#define AT91_PINCTRL_SLEWRATE (1 << 9) #define AT91_PINCTRL_DEBOUNCE (1 << 16) #define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) @@ -27,6 +28,9 @@ #define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) #define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) +#define AT91_PINCTRL_SLEWRATE_DIS (0x0 << 9) +#define AT91_PINCTRL_SLEWRATE_ENA (0x1 << 9) + #define AT91_PIOA 0 #define AT91_PIOB 1 #define AT91_PIOC 2 diff --git a/include/efi_api.h b/include/efi_api.h index 8647bfa6629..5b0a1006354 100644 --- a/include/efi_api.h +++ b/include/efi_api.h @@ -333,6 +333,10 @@ struct efi_system_table { EFI_GUID(0x5b1b31a1, 0x9562, 0x11d2, \ 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b) +#define LOADED_IMAGE_DEVICE_PATH_GUID \ + EFI_GUID(0xbc62157e, 0x3e33, 0x4fec, \ + 0x99, 0x20, 0x2d, 0x3b, 0x36, 0xd7, 0x50, 0xdf) + #define EFI_LOADED_IMAGE_PROTOCOL_REVISION 0x1000 struct efi_loaded_image { diff --git a/include/efi_loader.h b/include/efi_loader.h index 512880ab8fb..00b81c6010f 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -135,6 +135,7 @@ extern const efi_guid_t efi_guid_event_group_reset_system; /* GUID of the device tree table */ extern const efi_guid_t efi_guid_fdt; extern const efi_guid_t efi_guid_loaded_image; +extern const efi_guid_t efi_guid_loaded_image_device_path; extern const efi_guid_t efi_guid_device_path_to_text_protocol; extern const efi_guid_t efi_simple_file_system_protocol_guid; extern const efi_guid_t efi_file_info_guid; @@ -203,15 +204,11 @@ struct efi_object { * struct efi_loaded_image_obj - handle of a loaded image * * @header: EFI object header - * @reloc_base: base address for the relocated image - * @reloc_size: size of the relocated image * @exit_jmp: long jump buffer for returning form started image * @entry: entry address of the relocated image */ struct efi_loaded_image_obj { struct efi_object header; - void *reloc_base; - aligned_u64 reloc_size; efi_status_t exit_status; struct jmp_buf_data exit_jmp; EFIAPI efi_status_t (*entry)(efi_handle_t image_handle, @@ -320,10 +317,19 @@ efi_status_t efi_create_handle(efi_handle_t *handle); void efi_delete_handle(efi_handle_t obj); /* Call this to validate a handle and find the EFI object for it */ struct efi_object *efi_search_obj(const efi_handle_t handle); +/* Load image */ +efi_status_t EFIAPI efi_load_image(bool boot_policy, + efi_handle_t parent_image, + struct efi_device_path *file_path, + void *source_buffer, + efi_uintn_t source_size, + efi_handle_t *image_handle); /* Start image */ efi_status_t EFIAPI efi_start_image(efi_handle_t image_handle, efi_uintn_t *exit_data_size, u16 **exit_data); +/* Unload image */ +efi_status_t EFIAPI efi_unload_image(efi_handle_t image_handle); /* Find a protocol on a handle */ efi_status_t efi_search_protocol(const efi_handle_t handle, const efi_guid_t *protocol_guid, diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h new file mode 100644 index 00000000000..f838cb3ed1a --- /dev/null +++ b/include/environment/ti/nand.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + * + * Environment variable definitions for NAND on TI boards. + */ + +#ifdef CONFIG_NAND +#define NANDARGS \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ + "nand read ${loadaddr} NAND.kernel; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" +#else +#define NANDARGS "" +#endif + diff --git a/include/ext4fs.h b/include/ext4fs.h index 24210113411..34585d407d0 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -117,6 +117,12 @@ struct ext_filesystem { struct blk_desc *dev_desc; }; +struct ext_block_cache { + char *buf; + lbaint_t block; + int size; +}; + extern struct ext2_data *ext4fs_root; extern struct ext2fs_node *ext4fs_file; @@ -128,10 +134,11 @@ extern int gindex; int ext4fs_init(void); void ext4fs_deinit(void); int ext4fs_filename_unlink(char *filename); -int ext4fs_write(const char *fname, unsigned char *buffer, - unsigned long sizebytes); +int ext4fs_write(const char *fname, const char *buffer, + unsigned long sizebytes, int type); int ext4_write_file(const char *filename, void *buf, loff_t offset, loff_t len, loff_t *actwrite); +int ext4fs_create_link(const char *target, const char *fname); #endif struct ext_filesystem *get_fs(void); @@ -146,11 +153,15 @@ int ext4fs_size(const char *filename, loff_t *size); void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot); int ext4fs_devread(lbaint_t sector, int byte_offset, int byte_len, char *buf); void ext4fs_set_blk_dev(struct blk_desc *rbdd, disk_partition_t *info); -long int read_allocated_block(struct ext2_inode *inode, int fileblock); +long int read_allocated_block(struct ext2_inode *inode, int fileblock, + struct ext_block_cache *cache); int ext4fs_probe(struct blk_desc *fs_dev_desc, disk_partition_t *fs_partition); int ext4_read_file(const char *filename, void *buf, loff_t offset, loff_t len, loff_t *actread); int ext4_read_superblock(char *buffer); int ext4fs_uuid(char *uuid_str); +void ext_cache_init(struct ext_block_cache *cache); +void ext_cache_fini(struct ext_block_cache *cache); +int ext_cache_read(struct ext_block_cache *cache, lbaint_t block, int size); #endif diff --git a/include/fdtdec.h b/include/fdtdec.h index b7e35cd87c5..ad00f79f203 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -918,6 +918,26 @@ int fdtdec_decode_display_timing(const void *blob, int node, int index, struct display_timing *config); /** + * fdtdec_setup_mem_size_base_fdt() - decode and setup gd->ram_size and + * gd->ram_start + * + * Decode the /memory 'reg' property to determine the size and start of the + * first memory bank, populate the global data with the size and start of the + * first bank of memory. + * + * This function should be called from a boards dram_init(). This helper + * function allows for boards to query the device tree for DRAM size and start + * address instead of hard coding the value in the case where the memory size + * and start address cannot be detected automatically. + * + * @param blob FDT blob + * + * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or + * invalid + */ +int fdtdec_setup_mem_size_base_fdt(const void *blob); + +/** * fdtdec_setup_mem_size_base() - decode and setup gd->ram_size and * gd->ram_start * @@ -936,6 +956,25 @@ int fdtdec_decode_display_timing(const void *blob, int node, int index, int fdtdec_setup_mem_size_base(void); /** + * fdtdec_setup_memory_banksize_fdt() - decode and populate gd->bd->bi_dram + * + * Decode the /memory 'reg' property to determine the address and size of the + * memory banks. Use this data to populate the global data board info with the + * phys address and size of memory banks. + * + * This function should be called from a boards dram_init_banksize(). This + * helper function allows for boards to query the device tree for memory bank + * information instead of hard coding the information in cases where it cannot + * be detected automatically. + * + * @param blob FDT blob + * + * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or + * invalid + */ +int fdtdec_setup_memory_banksize_fdt(const void *blob); + +/** * fdtdec_setup_memory_banksize() - decode and populate gd->bd->bi_dram * * Decode the /memory 'reg' property to determine the address and size of the diff --git a/include/fs.h b/include/fs.h index aa3604db8dc..6854597700f 100644 --- a/include/fs.h +++ b/include/fs.h @@ -191,6 +191,8 @@ int do_rm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int fstype); int do_mkdir(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int fstype); +int do_ln(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype); /* * Determine the UUID of the specified filesystem and print it. Optionally it is diff --git a/include/i2c.h b/include/i2c.h index ccffc195527..a5c760c711e 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -68,9 +68,11 @@ struct dm_i2c_chip { * I2C bus udevice. * * @speed_hz: Bus speed in hertz (typically 100000) + * @max_transaction_bytes: Maximal size of single I2C transfer */ struct dm_i2c_bus { int speed_hz; + int max_transaction_bytes; }; /* diff --git a/include/linux/soc/ti/cppi5.h b/include/linux/soc/ti/cppi5.h new file mode 100644 index 00000000000..34038b31f70 --- /dev/null +++ b/include/linux/soc/ti/cppi5.h @@ -0,0 +1,995 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CPPI5 descriptors interface + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com + */ + +#ifndef __TI_CPPI5_H__ +#define __TI_CPPI5_H__ + +#include <hexdump.h> +#include <linux/bitops.h> + +/** + * Descriptor header, present in all types of descriptors + */ +struct cppi5_desc_hdr_t { + u32 pkt_info0; /* Packet info word 0 (n/a in Buffer desc) */ + u32 pkt_info1; /* Packet info word 1 (n/a in Buffer desc) */ + u32 pkt_info2; /* Packet info word 2 Buffer reclamation info */ + u32 src_dst_tag; /* Packet info word 3 (n/a in Buffer desc) */ +} __packed; + +/** + * Host-mode packet and buffer descriptor definition + */ +struct cppi5_host_desc_t { + struct cppi5_desc_hdr_t hdr; + u64 next_desc; /* w4/5: Linking word */ + u64 buf_ptr; /* w6/7: Buffer pointer */ + u32 buf_info1; /* w8: Buffer valid data length */ + u32 org_buf_len; /* w9: Original buffer length */ + u64 org_buf_ptr; /* w10/11: Original buffer pointer */ + u32 epib[0]; /* Extended Packet Info Data (optional, 4 words) */ + /* + * Protocol Specific Data (optional, 0-128 bytes in multiples of 4), + * and/or Other Software Data (0-N bytes, optional) + */ +} __packed; + +#define CPPI5_DESC_MIN_ALIGN (16U) + +#define CPPI5_INFO0_HDESC_EPIB_SIZE (16U) +#define CPPI5_INFO0_HDESC_PSDATA_MAX_SIZE (128U) + +#define CPPI5_INFO0_HDESC_TYPE_SHIFT (30U) +#define CPPI5_INFO0_HDESC_TYPE_MASK GENMASK(31, 30) +#define CPPI5_INFO0_DESC_TYPE_VAL_HOST (1U) +#define CPPI5_INFO0_DESC_TYPE_VAL_MONO (2U) +#define CPPI5_INFO0_DESC_TYPE_VAL_TR (3U) +#define CPPI5_INFO0_HDESC_EPIB_PRESENT BIT(29) +/* + * Protocol Specific Words location: + * 0 - located in the descriptor, + * 1 = located in the SOP Buffer immediately prior to the data. + */ +#define CPPI5_INFO0_HDESC_PSINFO_LOCATION BIT(28) +#define CPPI5_INFO0_HDESC_PSINFO_SIZE_SHIFT (22U) +#define CPPI5_INFO0_HDESC_PSINFO_SIZE_MASK GENMASK(27, 22) +#define CPPI5_INFO0_HDESC_PKTLEN_SHIFT (0) +#define CPPI5_INFO0_HDESC_PKTLEN_MASK GENMASK(21, 0) + +#define CPPI5_INFO1_DESC_PKTERROR_SHIFT (28U) +#define CPPI5_INFO1_DESC_PKTERROR_MASK GENMASK(31, 28) +#define CPPI5_INFO1_HDESC_PSFLGS_SHIFT (24U) +#define CPPI5_INFO1_HDESC_PSFLGS_MASK GENMASK(27, 24) +#define CPPI5_INFO1_DESC_PKTID_SHIFT (14U) +#define CPPI5_INFO1_DESC_PKTID_MASK GENMASK(23, 14) +#define CPPI5_INFO1_DESC_FLOWID_SHIFT (0) +#define CPPI5_INFO1_DESC_FLOWID_MASK GENMASK(13, 0) + +#define CPPI5_INFO2_HDESC_PKTTYPE_SHIFT (27U) +#define CPPI5_INFO2_HDESC_PKTTYPE_MASK GENMASK(31, 27) +/* Return Policy: 0 - Entire packet 1 - Each buffer */ +#define CPPI5_INFO2_HDESC_RETPOLICY BIT(18) +/* + * Early Return: + * 0 = desc pointers should be returned after all reads have been completed + * 1 = desc pointers should be returned immediately upon fetching + * the descriptor and beginning to transfer data. + */ +#define CPPI5_INFO2_HDESC_EARLYRET BIT(17) +/* + * Return Push Policy: + * 0 = Descriptor must be returned to tail of queue + * 1 = Descriptor must be returned to head of queue + */ +#define CPPI5_INFO2_DESC_RETPUSHPOLICY BIT(16) +#define CPPI5_INFO2_DESC_RETQ_SHIFT (0) +#define CPPI5_INFO2_DESC_RETQ_MASK GENMASK(15, 0) + +#define CPPI5_INFO3_DESC_SRCTAG_SHIFT (16U) +#define CPPI5_INFO3_DESC_SRCTAG_MASK GENMASK(31, 16) +#define CPPI5_INFO3_DESC_DSTTAG_SHIFT (0) +#define CPPI5_INFO3_DESC_DSTTAG_MASK GENMASK(15, 0) + +#define CPPI5_BUFINFO1_HDESC_DATA_LEN_SHIFT (0) +#define CPPI5_BUFINFO1_HDESC_DATA_LEN_MASK GENMASK(27, 0) + +#define CPPI5_OBUFINFO0_HDESC_BUF_LEN_SHIFT (0) +#define CPPI5_OBUFINFO0_HDESC_BUF_LEN_MASK GENMASK(27, 0) + +/* + * Host Packet Descriptor Extended Packet Info Block + */ +struct cppi5_desc_epib_t { + u32 timestamp; /* w0: application specific timestamp */ + u32 sw_info0; /* w1: Software Info 0 */ + u32 sw_info1; /* w2: Software Info 1 */ + u32 sw_info2; /* w3: Software Info 2 */ +}; + +/** + * Monolithic-mode packet descriptor + */ +struct cppi5_monolithic_desc_t { + struct cppi5_desc_hdr_t hdr; + u32 epib[0]; /* Extended Packet Info Data (optional, 4 words) */ + /* + * Protocol Specific Data (optional, 0-128 bytes in multiples of 4), + * and/or Other Software Data (0-N bytes, optional) + */ +}; + +#define CPPI5_INFO2_MDESC_DATA_OFFSET_SHIFT (18U) +#define CPPI5_INFO2_MDESC_DATA_OFFSET_MASK GENMASK(26, 18) + +/* + * Reload Enable: + * 0 = Finish the packet and place the descriptor back on the return queue + * 1 = Vector to the Reload Index and resume processing + */ +#define CPPI5_INFO0_TRDESC_RLDCNT_SHIFT (20U) +#define CPPI5_INFO0_TRDESC_RLDCNT_MASK GENMASK(28, 20) +#define CPPI5_INFO0_TRDESC_RLDCNT_MAX (0x1ff) +#define CPPI5_INFO0_TRDESC_RLDCNT_INFINITE CPPI5_INFO0_TRDESC_RLDCNT_MAX +#define CPPI5_INFO0_TRDESC_RLDIDX_SHIFT (14U) +#define CPPI5_INFO0_TRDESC_RLDIDX_MASK GENMASK(19, 14) +#define CPPI5_INFO0_TRDESC_RLDIDX_MAX (0x3f) +#define CPPI5_INFO0_TRDESC_LASTIDX_SHIFT (0) +#define CPPI5_INFO0_TRDESC_LASTIDX_MASK GENMASK(13, 0) + +#define CPPI5_INFO1_TRDESC_RECSIZE_SHIFT (24U) +#define CPPI5_INFO1_TRDESC_RECSIZE_MASK GENMASK(26, 24) +#define CPPI5_INFO1_TRDESC_RECSIZE_VAL_16B (0) +#define CPPI5_INFO1_TRDESC_RECSIZE_VAL_32B (1U) +#define CPPI5_INFO1_TRDESC_RECSIZE_VAL_64B (2U) +#define CPPI5_INFO1_TRDESC_RECSIZE_VAL_128B (3U) + +static inline void cppi5_desc_dump(void *desc, u32 size) +{ + print_hex_dump(KERN_ERR "dump udmap_desc: ", DUMP_PREFIX_NONE, + 32, 4, desc, size, false); +} + +/** + * cppi5_desc_get_type - get descriptor type + * @desc_hdr: packet descriptor/TR header + * + * Returns descriptor type: + * CPPI5_INFO0_DESC_TYPE_VAL_HOST + * CPPI5_INFO0_DESC_TYPE_VAL_MONO + * CPPI5_INFO0_DESC_TYPE_VAL_TR + */ +static inline u32 cppi5_desc_get_type(struct cppi5_desc_hdr_t *desc_hdr) +{ + WARN_ON(!desc_hdr); + + return (desc_hdr->pkt_info0 & CPPI5_INFO0_HDESC_TYPE_MASK) >> + CPPI5_INFO0_HDESC_TYPE_SHIFT; +} + +/** + * cppi5_desc_get_errflags - get Error Flags from Desc + * @desc_hdr: packet/TR descriptor header + * + * Returns Error Flags from Packet/TR Descriptor + */ +static inline u32 cppi5_desc_get_errflags(struct cppi5_desc_hdr_t *desc_hdr) +{ + WARN_ON(!desc_hdr); + + return (desc_hdr->pkt_info1 & CPPI5_INFO1_DESC_PKTERROR_MASK) >> + CPPI5_INFO1_DESC_PKTERROR_SHIFT; +} + +/** + * cppi5_desc_get_pktids - get Packet and Flow ids from Desc + * @desc_hdr: packet/TR descriptor header + * @pkt_id: Packet ID + * @flow_id: Flow ID + * + * Returns Packet and Flow ids from packet/TR descriptor + */ +static inline void cppi5_desc_get_pktids(struct cppi5_desc_hdr_t *desc_hdr, + u32 *pkt_id, u32 *flow_id) +{ + WARN_ON(!desc_hdr); + + *pkt_id = (desc_hdr->pkt_info1 & CPPI5_INFO1_DESC_PKTID_MASK) >> + CPPI5_INFO1_DESC_PKTID_SHIFT; + *flow_id = (desc_hdr->pkt_info1 & CPPI5_INFO1_DESC_FLOWID_MASK) >> + CPPI5_INFO1_DESC_FLOWID_SHIFT; +} + +/** + * cppi5_desc_set_pktids - set Packet and Flow ids in Desc + * @desc_hdr: packet/TR descriptor header + * @pkt_id: Packet ID + * @flow_id: Flow ID + */ +static inline void cppi5_desc_set_pktids(struct cppi5_desc_hdr_t *desc_hdr, + u32 pkt_id, u32 flow_id) +{ + WARN_ON(!desc_hdr); + + desc_hdr->pkt_info1 |= (pkt_id << CPPI5_INFO1_DESC_PKTID_SHIFT) & + CPPI5_INFO1_DESC_PKTID_MASK; + desc_hdr->pkt_info1 |= (flow_id << CPPI5_INFO1_DESC_FLOWID_SHIFT) & + CPPI5_INFO1_DESC_FLOWID_MASK; +} + +/** + * cppi5_desc_set_retpolicy - set Packet Return Policy in Desc + * @desc_hdr: packet/TR descriptor header + * @flags: fags, supported values + * CPPI5_INFO2_HDESC_RETPOLICY + * CPPI5_INFO2_HDESC_EARLYRET + * CPPI5_INFO2_DESC_RETPUSHPOLICY + * @return_ring_id: Packet Return Queue/Ring id, value 0xFFFF reserved + */ +static inline void cppi5_desc_set_retpolicy(struct cppi5_desc_hdr_t *desc_hdr, + u32 flags, u32 return_ring_id) +{ + WARN_ON(!desc_hdr); + + desc_hdr->pkt_info2 |= flags; + desc_hdr->pkt_info2 |= return_ring_id & CPPI5_INFO2_DESC_RETQ_MASK; +} + +/** + * cppi5_desc_get_tags_ids - get Packet Src/Dst Tags from Desc + * @desc_hdr: packet/TR descriptor header + * @src_tag_id: Source Tag + * @dst_tag_id: Dest Tag + * + * Returns Packet Src/Dst Tags from packet/TR descriptor + */ +static inline void cppi5_desc_get_tags_ids(struct cppi5_desc_hdr_t *desc_hdr, + u32 *src_tag_id, u32 *dst_tag_id) +{ + WARN_ON(!desc_hdr); + + if (src_tag_id) + *src_tag_id = (desc_hdr->src_dst_tag & + CPPI5_INFO3_DESC_SRCTAG_MASK) >> + CPPI5_INFO3_DESC_SRCTAG_SHIFT; + if (dst_tag_id) + *dst_tag_id = desc_hdr->src_dst_tag & + CPPI5_INFO3_DESC_DSTTAG_MASK; +} + +/** + * cppi5_desc_set_tags_ids - set Packet Src/Dst Tags in HDesc + * @desc_hdr: packet/TR descriptor header + * @src_tag_id: Source Tag + * @dst_tag_id: Dest Tag + * + * Returns Packet Src/Dst Tags from packet/TR descriptor + */ +static inline void cppi5_desc_set_tags_ids(struct cppi5_desc_hdr_t *desc_hdr, + u32 src_tag_id, u32 dst_tag_id) +{ + WARN_ON(!desc_hdr); + + desc_hdr->src_dst_tag = (src_tag_id << CPPI5_INFO3_DESC_SRCTAG_SHIFT) & + CPPI5_INFO3_DESC_SRCTAG_MASK; + desc_hdr->src_dst_tag |= dst_tag_id & CPPI5_INFO3_DESC_DSTTAG_MASK; +} + +/** + * cppi5_hdesc_calc_size - Calculate Host Packet Descriptor size + * @epib: is EPIB present + * @psdata_size: PSDATA size + * @sw_data_size: SWDATA size + * + * Returns required Host Packet Descriptor size + * 0 - if PSDATA > CPPI5_INFO0_HDESC_PSDATA_MAX_SIZE + */ +static inline u32 cppi5_hdesc_calc_size(bool epib, u32 psdata_size, + u32 sw_data_size) +{ + u32 desc_size; + + if (psdata_size > CPPI5_INFO0_HDESC_PSDATA_MAX_SIZE) + return 0; + //TODO_GS: align + desc_size = sizeof(struct cppi5_host_desc_t) + psdata_size + + sw_data_size; + + if (epib) + desc_size += CPPI5_INFO0_HDESC_EPIB_SIZE; + + return ALIGN(desc_size, CPPI5_DESC_MIN_ALIGN); +} + +/** + * cppi5_hdesc_init - Init Host Packet Descriptor size + * @desc: Host packet descriptor + * @flags: supported values + * CPPI5_INFO0_HDESC_EPIB_PRESENT + * CPPI5_INFO0_HDESC_PSINFO_LOCATION + * @psdata_size: PSDATA size + * + * Returns required Host Packet Descriptor size + * 0 - if PSDATA > CPPI5_INFO0_HDESC_PSDATA_MAX_SIZE + */ +static inline void cppi5_hdesc_init(struct cppi5_host_desc_t *desc, u32 flags, + u32 psdata_size) +{ + WARN_ON(!desc); + WARN_ON(psdata_size > CPPI5_INFO0_HDESC_PSDATA_MAX_SIZE); + WARN_ON(flags & ~(CPPI5_INFO0_HDESC_EPIB_PRESENT | + CPPI5_INFO0_HDESC_PSINFO_LOCATION)); + + desc->hdr.pkt_info0 = (CPPI5_INFO0_DESC_TYPE_VAL_HOST << + CPPI5_INFO0_HDESC_TYPE_SHIFT) | (flags); + desc->hdr.pkt_info0 |= ((psdata_size >> 2) << + CPPI5_INFO0_HDESC_PSINFO_SIZE_SHIFT) & + CPPI5_INFO0_HDESC_PSINFO_SIZE_MASK; + desc->next_desc = 0; +} + +/** + * cppi5_hdesc_update_flags - Replace descriptor flags + * @desc: Host packet descriptor + * @flags: supported values + * CPPI5_INFO0_HDESC_EPIB_PRESENT + * CPPI5_INFO0_HDESC_PSINFO_LOCATION + */ +static inline void cppi5_hdesc_update_flags(struct cppi5_host_desc_t *desc, + u32 flags) +{ + WARN_ON(!desc); + WARN_ON(flags & ~(CPPI5_INFO0_HDESC_EPIB_PRESENT | + CPPI5_INFO0_HDESC_PSINFO_LOCATION)); + + desc->hdr.pkt_info0 &= ~(CPPI5_INFO0_HDESC_EPIB_PRESENT | + CPPI5_INFO0_HDESC_PSINFO_LOCATION); + desc->hdr.pkt_info0 |= flags; +} + +/** + * cppi5_hdesc_update_psdata_size - Replace PSdata size + * @desc: Host packet descriptor + * @psdata_size: PSDATA size + */ +static inline void cppi5_hdesc_update_psdata_size( + struct cppi5_host_desc_t *desc, u32 psdata_size) +{ + WARN_ON(!desc); + WARN_ON(psdata_size > CPPI5_INFO0_HDESC_PSDATA_MAX_SIZE); + + desc->hdr.pkt_info0 &= ~CPPI5_INFO0_HDESC_PSINFO_SIZE_MASK; + desc->hdr.pkt_info0 |= ((psdata_size >> 2) << + CPPI5_INFO0_HDESC_PSINFO_SIZE_SHIFT) & + CPPI5_INFO0_HDESC_PSINFO_SIZE_MASK; +} + +/** + * cppi5_hdesc_get_psdata_size - get PSdata size in bytes + * @desc: Host packet descriptor + */ +static inline u32 cppi5_hdesc_get_psdata_size(struct cppi5_host_desc_t *desc) +{ + u32 psdata_size = 0; + + WARN_ON(!desc); + + if (!(desc->hdr.pkt_info0 & CPPI5_INFO0_HDESC_PSINFO_LOCATION)) + psdata_size = (desc->hdr.pkt_info0 & + CPPI5_INFO0_HDESC_PSINFO_SIZE_MASK) >> + CPPI5_INFO0_HDESC_PSINFO_SIZE_SHIFT; + + return (psdata_size << 2); +} + +/** + * cppi5_hdesc_get_pktlen - get Packet Length from HDesc + * @desc: Host packet descriptor + * + * Returns Packet Length from Host Packet Descriptor + */ +static inline u32 cppi5_hdesc_get_pktlen(struct cppi5_host_desc_t *desc) +{ + WARN_ON(!desc); + + return (desc->hdr.pkt_info0 & CPPI5_INFO0_HDESC_PKTLEN_MASK); +} + +/** + * cppi5_hdesc_set_pktlen - set Packet Length in HDesc + * @desc: Host packet descriptor + */ +static inline void cppi5_hdesc_set_pktlen(struct cppi5_host_desc_t *desc, + u32 pkt_len) +{ + WARN_ON(!desc); + + desc->hdr.pkt_info0 |= (pkt_len & CPPI5_INFO0_HDESC_PKTLEN_MASK); +} + +/** + * cppi5_hdesc_get_psflags - get Protocol Specific Flags from HDesc + * @desc: Host packet descriptor + * + * Returns Protocol Specific Flags from Host Packet Descriptor + */ +static inline u32 cppi5_hdesc_get_psflags(struct cppi5_host_desc_t *desc) +{ + WARN_ON(!desc); + + return (desc->hdr.pkt_info1 & CPPI5_INFO1_HDESC_PSFLGS_MASK) >> + CPPI5_INFO1_HDESC_PSFLGS_SHIFT; +} + +/** + * cppi5_hdesc_set_psflags - set Protocol Specific Flags in HDesc + * @desc: Host packet descriptor + */ +static inline void cppi5_hdesc_set_psflags(struct cppi5_host_desc_t *desc, + u32 ps_flags) +{ + WARN_ON(!desc); + + desc->hdr.pkt_info1 |= (ps_flags << + CPPI5_INFO1_HDESC_PSFLGS_SHIFT) & + CPPI5_INFO1_HDESC_PSFLGS_MASK; +} + +/** + * cppi5_hdesc_get_errflags - get Packet Type from HDesc + * @desc: Host packet descriptor + */ +static inline u32 cppi5_hdesc_get_pkttype(struct cppi5_host_desc_t *desc) +{ + WARN_ON(!desc); + + return (desc->hdr.pkt_info2 & CPPI5_INFO2_HDESC_PKTTYPE_MASK) >> + CPPI5_INFO2_HDESC_PKTTYPE_SHIFT; +} + +/** + * cppi5_hdesc_get_errflags - set Packet Type in HDesc + * @desc: Host packet descriptor + * @pkt_type: Packet Type + */ +static inline void cppi5_hdesc_set_pkttype(struct cppi5_host_desc_t *desc, + u32 pkt_type) +{ + WARN_ON(!desc); + desc->hdr.pkt_info2 |= + (pkt_type << CPPI5_INFO2_HDESC_PKTTYPE_SHIFT) & + CPPI5_INFO2_HDESC_PKTTYPE_MASK; +} + +/** + * cppi5_hdesc_attach_buf - attach buffer to HDesc + * @desc: Host packet descriptor + * @buf: Buffer physical address + * @buf_data_len: Buffer length + * @obuf: Original Buffer physical address + * @obuf_len: Original Buffer length + * + * Attaches buffer to Host Packet Descriptor + */ +static inline void cppi5_hdesc_attach_buf(struct cppi5_host_desc_t *desc, + dma_addr_t buf, u32 buf_data_len, + dma_addr_t obuf, u32 obuf_len) +{ + WARN_ON(!desc); + WARN_ON(!buf && !obuf); + + desc->buf_ptr = buf; + desc->buf_info1 = buf_data_len & CPPI5_BUFINFO1_HDESC_DATA_LEN_MASK; + desc->org_buf_ptr = obuf; + desc->org_buf_len = obuf_len & CPPI5_OBUFINFO0_HDESC_BUF_LEN_MASK; +} + +static inline void cppi5_hdesc_get_obuf(struct cppi5_host_desc_t *desc, + dma_addr_t *obuf, u32 *obuf_len) +{ + WARN_ON(!desc); + WARN_ON(!obuf); + WARN_ON(!obuf_len); + + *obuf = desc->org_buf_ptr; + *obuf_len = desc->org_buf_len & CPPI5_OBUFINFO0_HDESC_BUF_LEN_MASK; +} + +static inline void cppi5_hdesc_reset_to_original(struct cppi5_host_desc_t *desc) +{ + WARN_ON(!desc); + + desc->buf_ptr = desc->org_buf_ptr; + desc->buf_info1 = desc->org_buf_len; +} + +/** + * cppi5_hdesc_link_hbdesc - link Host Buffer Descriptor to HDesc + * @desc: Host Packet Descriptor + * @buf_desc: Host Buffer Descriptor physical address + * + * add and link Host Buffer Descriptor to HDesc + */ +static inline void cppi5_hdesc_link_hbdesc(struct cppi5_host_desc_t *desc, + dma_addr_t hbuf_desc) +{ + WARN_ON(!desc); + WARN_ON(!hbuf_desc); + + desc->next_desc = hbuf_desc; +} + +static inline dma_addr_t cppi5_hdesc_get_next_hbdesc( + struct cppi5_host_desc_t *desc) +{ + WARN_ON(!desc); + + return (dma_addr_t)desc->next_desc; +} + +static inline void cppi5_hdesc_reset_hbdesc(struct cppi5_host_desc_t *desc) +{ + WARN_ON(!desc); + + desc->hdr = (struct cppi5_desc_hdr_t) { 0 }; + desc->next_desc = 0; +} + +/** + * cppi5_hdesc_epib_present - check if EPIB present + * @desc_hdr: packet descriptor/TR header + * + * Returns true if EPIB present in the packet + */ +static inline bool cppi5_hdesc_epib_present(struct cppi5_desc_hdr_t *desc_hdr) +{ + WARN_ON(!desc_hdr); + return !!(desc_hdr->pkt_info0 & CPPI5_INFO0_HDESC_EPIB_PRESENT); +} + +/** + * cppi5_hdesc_get_psdata - Get pointer on PSDATA + * @desc: Host packet descriptor + * + * Returns pointer on PSDATA in HDesc. + * NULL - if ps_data placed at the start of data buffer. + */ +static inline void *cppi5_hdesc_get_psdata(struct cppi5_host_desc_t *desc) +{ + u32 psdata_size; + void *psdata; + + WARN_ON(!desc); + + if (desc->hdr.pkt_info0 & CPPI5_INFO0_HDESC_PSINFO_LOCATION) + return NULL; + + psdata_size = (desc->hdr.pkt_info0 & + CPPI5_INFO0_HDESC_PSINFO_SIZE_MASK) >> + CPPI5_INFO0_HDESC_PSINFO_SIZE_SHIFT; + + if (!psdata_size) + return NULL; + + psdata = &desc->epib; + + if (cppi5_hdesc_epib_present(&desc->hdr)) + psdata += CPPI5_INFO0_HDESC_EPIB_SIZE; + + return psdata; +} + +static inline u32 *cppi5_hdesc_get_psdata32(struct cppi5_host_desc_t *desc) +{ + return (u32 *)cppi5_hdesc_get_psdata(desc); +} + +/** + * cppi5_hdesc_get_swdata - Get pointer on swdata + * @desc: Host packet descriptor + * + * Returns pointer on SWDATA in HDesc. + * NOTE. It's caller responsibility to be sure hdesc actually has swdata. + */ +static inline void *cppi5_hdesc_get_swdata(struct cppi5_host_desc_t *desc) +{ + u32 psdata_size = 0; + void *swdata; + + WARN_ON(!desc); + + if (!(desc->hdr.pkt_info0 & CPPI5_INFO0_HDESC_PSINFO_LOCATION)) + psdata_size = (desc->hdr.pkt_info0 & + CPPI5_INFO0_HDESC_PSINFO_SIZE_MASK) >> + CPPI5_INFO0_HDESC_PSINFO_SIZE_SHIFT; + + swdata = &desc->epib; + + if (cppi5_hdesc_epib_present(&desc->hdr)) + swdata += CPPI5_INFO0_HDESC_EPIB_SIZE; + + swdata += (psdata_size << 2); + + return swdata; +} + +/* ================================== TR ================================== */ + +#define CPPI5_TR_TYPE_SHIFT (0U) +#define CPPI5_TR_TYPE_MASK GENMASK(3, 0) +#define CPPI5_TR_STATIC BIT(4) +#define CPPI5_TR_WAIT BIT(5) +#define CPPI5_TR_EVENT_SIZE_SHIFT (6U) +#define CPPI5_TR_EVENT_SIZE_MASK GENMASK(7, 6) +#define CPPI5_TR_TRIGGER0_SHIFT (8U) +#define CPPI5_TR_TRIGGER0_MASK GENMASK(9, 8) +#define CPPI5_TR_TRIGGER0_TYPE_SHIFT (10U) +#define CPPI5_TR_TRIGGER0_TYPE_MASK GENMASK(11, 10) +#define CPPI5_TR_TRIGGER1_SHIFT (12U) +#define CPPI5_TR_TRIGGER1_MASK GENMASK(13, 12) +#define CPPI5_TR_TRIGGER1_TYPE_SHIFT (14U) +#define CPPI5_TR_TRIGGER1_TYPE_MASK GENMASK(15, 14) +#define CPPI5_TR_CMD_ID_SHIFT (16U) +#define CPPI5_TR_CMD_ID_MASK GENMASK(23, 16) +#define CPPI5_TR_CSF_FLAGS_SHIFT (24U) +#define CPPI5_TR_CSF_FLAGS_MASK GENMASK(31, 24) +#define CPPI5_TR_CSF_SA_INDIRECT BIT(0) +#define CPPI5_TR_CSF_DA_INDIRECT BIT(1) +#define CPPI5_TR_CSF_SUPR_EVT BIT(2) +#define CPPI5_TR_CSF_EOL_ADV_SHIFT (4U) +#define CPPI5_TR_CSF_EOL_ADV_MASK GENMASK(6, 4) +#define CPPI5_TR_CSF_EOP BIT(7) + +/* Udmap TR flags Type field specifies the type of TR. */ +enum cppi5_tr_types { + /* type0: One dimensional data move */ + CPPI5_TR_TYPE0 = 0, + /* type1: Two dimensional data move */ + CPPI5_TR_TYPE1, + /* type2: Three dimensional data move */ + CPPI5_TR_TYPE2, + /* type3: Four dimensional data move */ + CPPI5_TR_TYPE3, + /* type4: Four dimensional data move with data formatting */ + CPPI5_TR_TYPE4, + /* type5: Four dimensional Cache Warm */ + CPPI5_TR_TYPE5, + /* type6-7: Reserved */ + /* type8: Four Dimensional Block Move */ + CPPI5_TR_TYPE8 = 8, + /* type9: Four Dimensional Block Move with Repacking */ + CPPI5_TR_TYPE9, + /* type10: Two Dimensional Block Move */ + CPPI5_TR_TYPE10, + /* type11: Two Dimensional Block Move with Repacking */ + CPPI5_TR_TYPE11, + /* type12-14: Reserved */ + /* type15 Four Dimensional Block Move with Repacking and Indirection */ + CPPI5_TR_TYPE15 = 15, + CPPI5_TR_TYPE_MAX +}; + +/* + * Udmap TR Flags EVENT_SIZE field specifies when an event is generated + * for each TR. + */ +enum cppi5_tr_event_size { + /* When TR is complete and all status for the TR has been received */ + CPPI5_TR_EVENT_SIZE_COMPLETION, + /* + * Type 0: when the last data transaction is sent for the TR; + * Type 1-11: when ICNT1 is decremented + */ + CPPI5_TR_EVENT_SIZE_ICNT1_DEC, + /* + * Type 0-1,10-11: when the last data transaction is sent for the TR; + * All other types: when ICNT2 is decremented + */ + CPPI5_TR_EVENT_SIZE_ICNT2_DEC, + /* + * Type 0-2,10-11: when the last data transaction is sent for the TR; + * All other types: when ICNT3 is decremented + */ + CPPI5_TR_EVENT_SIZE_ICNT3_DEC, + CPPI5_TR_EVENT_SIZE_MAX +}; + +/* + * Udmap TR Flags TRIGGERx field specifies the type of trigger used to + * enable the TR to transfer data as specified by TRIGGERx_TYPE field. + */ +enum cppi5_tr_trigger { + CPPI5_TR_TRIGGER_NONE, /* No Trigger */ + CPPI5_TR_TRIGGER_GLOBAL0, /* Global Trigger 0 */ + CPPI5_TR_TRIGGER_GLOBAL1, /* Global Trigger 1 */ + CPPI5_TR_TRIGGER_LOCAL_EVENT, /* Local Event */ + CPPI5_TR_TRIGGER_MAX +}; + +/* + * Udmap TR Flags TRIGGERx_TYPE field specifies the type of data transfer + * that will be enabled by receiving a trigger as specified by TRIGGERx. + */ +enum cppi5_tr_trigger_type { + /* The second inner most loop (ICNT1) will be decremented by 1 */ + CPPI5_TR_TRIGGER_TYPE_ICNT1_DEC, + /* The third inner most loop (ICNT2) will be decremented by 1 */ + CPPI5_TR_TRIGGER_TYPE_ICNT2_DEC, + /* The outer most loop (ICNT3) will be decremented by 1 */ + CPPI5_TR_TRIGGER_TYPE_ICNT3_DEC, + /* The entire TR will be allowed to complete */ + CPPI5_TR_TRIGGER_TYPE_ALL, + CPPI5_TR_TRIGGER_TYPE_MAX +}; + +typedef u32 cppi5_tr_flags_t; + +/* Type 0 (One dimensional data move) TR (16 byte) */ +struct cppi5_tr_type0_t { + cppi5_tr_flags_t flags; + u16 icnt0; + u16 unused; + u64 addr; +} __aligned(16) __packed; + +/* Type 1 (Two dimensional data move) TR (32 byte) */ +struct cppi5_tr_type1_t { + cppi5_tr_flags_t flags; + u16 icnt0; + u16 icnt1; + u64 addr; + s32 dim1; +} __aligned(32) __packed; + +/* Type 2 (Three dimensional data move) TR (32 byte) */ +struct cppi5_tr_type2_t { + cppi5_tr_flags_t flags; + u16 icnt0; + u16 icnt1; + u64 addr; + s32 dim1; + u16 icnt2; + u16 unused; + s32 dim2; +} __aligned(32) __packed; + +/* Type 3 (Four dimensional data move) TR (32 byte) */ +struct cppi5_tr_type3_t { + cppi5_tr_flags_t flags; + u16 icnt0; + u16 icnt1; + u64 addr; + s32 dim1; + u16 icnt2; + u16 icnt3; + s32 dim2; + s32 dim3; +} __aligned(32) __packed; + +/* + * Type 15 (Four Dimensional Block Copy with Repacking and + * Indirection Support) TR (64 byte). + */ +struct cppi5_tr_type15_t { + cppi5_tr_flags_t flags; + u16 icnt0; + u16 icnt1; + u64 addr; + s32 dim1; + u16 icnt2; + u16 icnt3; + s32 dim2; + s32 dim3; + u32 _reserved; + s32 ddim1; + u64 daddr; + s32 ddim2; + s32 ddim3; + u16 dicnt0; + u16 dicnt1; + u16 dicnt2; + u16 dicnt3; +} __aligned(64) __packed; + +struct cppi5_tr_resp_t { + u8 status; + u8 reserved; + u8 cmd_id; + u8 flags; +} __packed; + +#define CPPI5_TR_RESPONSE_STATUS_TYPE_SHIFT (0U) +#define CPPI5_TR_RESPONSE_STATUS_TYPE_MASK GENMASK(3, 0) +#define CPPI5_TR_RESPONSE_STATUS_INFO_SHIFT (4U) +#define CPPI5_TR_RESPONSE_STATUS_INFO_MASK GENMASK(7, 4) +#define CPPI5_TR_RESPONSE_CMDID_SHIFT (16U) +#define CPPI5_TR_RESPONSE_CMDID_MASK GENMASK(23, 16) +#define CPPI5_TR_RESPONSE_CFG_SPECIFIC_SHIFT (24U) +#define CPPI5_TR_RESPONSE_CFG_SPECIFIC_MASK GENMASK(31, 24) + +/* + * Udmap TR Response Status Type field is used to determine + * what type of status is being returned. + */ +enum cppi5_tr_resp_status_type { + CPPI5_TR_RESPONSE_STATUS_COMPLETE, /* None */ + CPPI5_TR_RESPONSE_STATUS_TRANSFER_ERR, /* Transfer Error */ + CPPI5_TR_RESPONSE_STATUS_ABORTED_ERR, /* Aborted Error */ + CPPI5_TR_RESPONSE_STATUS_SUBMISSION_ERR, /* Submission Error */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_ERR, /* Unsup. Feature */ + CPPI5_TR_RESPONSE_STATUS_MAX +}; + +/* + * Udmap TR Response Status field values which corresponds + * CPPI5_TR_RESPONSE_STATUS_SUBMISSION_ERR + */ +enum cppi5_tr_resp_status_submission { + /* ICNT0 was 0 */ + CPPI5_TR_RESPONSE_STATUS_SUBMISSION_ICNT0, + /* Channel FIFO was full when TR received */ + CPPI5_TR_RESPONSE_STATUS_SUBMISSION_FIFO_FULL, + /* Channel is not owned by the submitter */ + CPPI5_TR_RESPONSE_STATUS_SUBMISSION_OWN, + CPPI5_TR_RESPONSE_STATUS_SUBMISSION_MAX +}; + +/* + * Udmap TR Response Status field values which corresponds + * CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_ERR + */ +enum cppi5_tr_resp_status_unsupported { + /* TR Type not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_TR_TYPE, + /* STATIC not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_STATIC, + /* EOL not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_EOL, + /* CONFIGURATION SPECIFIC not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_CFG_SPECIFIC, + /* AMODE not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_AMODE, + /* ELTYPE not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_ELTYPE, + /* DFMT not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_DFMT, + /* SECTR not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_SECTR, + /* AMODE SPECIFIC field not supported */ + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_AMODE_SPECIFIC, + CPPI5_TR_RESPONSE_STATUS_UNSUPPORTED_MAX +}; + +/** + * cppi5_trdesc_calc_size - Calculate TR Descriptor size + * @tr_count: number of TR records + * @tr_size: Nominal size of TR record (max) [16, 32, 64, 128] + * + * Returns required TR Descriptor size + */ +static inline size_t cppi5_trdesc_calc_size(u32 tr_count, u32 tr_size) +{ + /* + * The Size of a TR descriptor is: + * 1 x tr_size : the first 16 bytes is used by the packet info block + + * tr_count x tr_size : Transfer Request Records + + * tr_count x sizeof(struct cppi5_tr_resp_t) : Transfer Response Records + */ + return tr_size * (tr_count + 1) + + sizeof(struct cppi5_tr_resp_t) * tr_count; +} + +/** + * cppi5_trdesc_init - Init TR Descriptor + * @desc: TR Descriptor + * @tr_count: number of TR records + * @tr_size: Nominal size of TR record (max) [16, 32, 64, 128] + * @reload_idx: Absolute index to jump to on the 2nd and following passes + * through the TR packet. + * @reload_count: Number of times to jump from last entry to reload_idx. 0x1ff + * indicates infinite looping. + * + * Init TR Descriptor + */ +static inline void cppi5_trdesc_init(struct cppi5_desc_hdr_t *desc_hdr, + u32 tr_count, u32 tr_size, u32 reload_idx, + u32 reload_count) +{ + WARN_ON(!desc_hdr); + WARN_ON(tr_count & ~CPPI5_INFO0_TRDESC_LASTIDX_MASK); + WARN_ON(reload_idx > CPPI5_INFO0_TRDESC_RLDIDX_MAX); + WARN_ON(reload_count > CPPI5_INFO0_TRDESC_RLDCNT_MAX); + + desc_hdr->pkt_info0 = CPPI5_INFO0_DESC_TYPE_VAL_TR << + CPPI5_INFO0_HDESC_TYPE_SHIFT; + desc_hdr->pkt_info0 |= (reload_count << CPPI5_INFO0_TRDESC_RLDCNT_SHIFT) & + CPPI5_INFO0_TRDESC_RLDCNT_MASK; + desc_hdr->pkt_info0 |= (reload_idx << CPPI5_INFO0_TRDESC_RLDIDX_SHIFT) & + CPPI5_INFO0_TRDESC_RLDIDX_MASK; + desc_hdr->pkt_info0 |= (tr_count - 1) & CPPI5_INFO0_TRDESC_LASTIDX_MASK; + + desc_hdr->pkt_info1 |= ((ffs(tr_size >> 4) - 1) << + CPPI5_INFO1_TRDESC_RECSIZE_SHIFT) & + CPPI5_INFO1_TRDESC_RECSIZE_MASK; +} + +/** + * cppi5_tr_init - Init TR record + * @flags: Pointer to the TR's flags + * @type: TR type + * @static_tr: TR is static + * @wait: Wait for TR completion before allow the next TR to start + * @event_size: output event generation cfg + * @cmd_id: TR identifier (application specifics) + * + * Init TR record + */ +static inline void cppi5_tr_init(cppi5_tr_flags_t *flags, + enum cppi5_tr_types type, bool static_tr, + bool wait, enum cppi5_tr_event_size event_size, + u32 cmd_id) +{ + WARN_ON(!flags); + + *flags = type; + *flags |= (event_size << CPPI5_TR_EVENT_SIZE_SHIFT) & + CPPI5_TR_EVENT_SIZE_MASK; + + *flags |= (cmd_id << CPPI5_TR_CMD_ID_SHIFT) & + CPPI5_TR_CMD_ID_MASK; + + if (static_tr && (type == CPPI5_TR_TYPE8 || type == CPPI5_TR_TYPE9)) + *flags |= CPPI5_TR_STATIC; + + if (wait) + *flags |= CPPI5_TR_WAIT; +} + +/** + * cppi5_tr_set_trigger - Configure trigger0/1 and trigger0/1_type + * @flags: Pointer to the TR's flags + * @trigger0: trigger0 selection + * @trigger0_type: type of data transfer that will be enabled by trigger0 + * @trigger1: trigger1 selection + * @trigger1_type: type of data transfer that will be enabled by trigger1 + * + * Configure the triggers for the TR + */ +static inline void cppi5_tr_set_trigger(cppi5_tr_flags_t *flags, + enum cppi5_tr_trigger trigger0, + enum cppi5_tr_trigger_type trigger0_type, + enum cppi5_tr_trigger trigger1, + enum cppi5_tr_trigger_type trigger1_type) +{ + WARN_ON(!flags); + + *flags |= (trigger0 << CPPI5_TR_TRIGGER0_SHIFT) & + CPPI5_TR_TRIGGER0_MASK; + *flags |= (trigger0_type << CPPI5_TR_TRIGGER0_TYPE_SHIFT) & + CPPI5_TR_TRIGGER0_TYPE_MASK; + + *flags |= (trigger1 << CPPI5_TR_TRIGGER1_SHIFT) & + CPPI5_TR_TRIGGER1_MASK; + *flags |= (trigger1_type << CPPI5_TR_TRIGGER1_TYPE_SHIFT) & + CPPI5_TR_TRIGGER1_TYPE_MASK; +} + +/** + * cppi5_tr_cflag_set - Update the Configuration specific flags + * @flags: Pointer to the TR's flags + * @csf: Configuration specific flags + * + * Set a bit in Configuration Specific Flags section of the TR flags. + */ +static inline void cppi5_tr_csf_set(cppi5_tr_flags_t *flags, u32 csf) +{ + WARN_ON(!flags); + + *flags |= (csf << CPPI5_TR_CSF_FLAGS_SHIFT) & + CPPI5_TR_CSF_FLAGS_MASK; +} + +#endif /* __TI_CPPI5_H__ */ diff --git a/include/linux/soc/ti/k3-navss-ringacc.h b/include/linux/soc/ti/k3-navss-ringacc.h new file mode 100644 index 00000000000..487dfe98595 --- /dev/null +++ b/include/linux/soc/ti/k3-navss-ringacc.h @@ -0,0 +1,236 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * TI K3 AM65x NAVSS Ring accelerator Manager (RA) subsystem driver + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com + */ + +#ifndef __SOC_TI_K3_NAVSS_RINGACC_API_H_ +#define __SOC_TI_K3_NAVSS_RINGACC_API_H_ + +#include <dm/ofnode.h> + +/** + * enum k3_nav_ring_mode - &struct k3_nav_ring_cfg mode + * + * RA ring operational modes + * + * @K3_NAV_RINGACC_RING_MODE_RING: Exposed Ring mode for SW direct access + * @K3_NAV_RINGACC_RING_MODE_MESSAGE: Messaging mode. Messaging mode requires + * that all accesses to the queue must go through this IP so that all + * accesses to the memory are controlled and ordered. This IP then + * controls the entire state of the queue, and SW has no directly control, + * such as through doorbells and cannot access the storage memory directly. + * This is particularly useful when more than one SW or HW entity can be + * the producer and/or consumer at the same time + * @K3_NAV_RINGACC_RING_MODE_CREDENTIALS: Credentials mode is message mode plus + * stores credentials with each message, requiring the element size to be + * doubled to fit the credentials. Any exposed memory should be protected + * by a firewall from unwanted access + * @K3_NAV_RINGACC_RING_MODE_QM: Queue manager mode. This takes the credentials + * mode and adds packet length per element, along with additional read only + * fields for element count and accumulated queue length. The QM mode only + * operates with an 8 byte element size (any other element size is + * illegal), and like in credentials mode each operation uses 2 element + * slots to store the credentials and length fields + */ +enum k3_nav_ring_mode { + K3_NAV_RINGACC_RING_MODE_RING = 0, + K3_NAV_RINGACC_RING_MODE_MESSAGE, + K3_NAV_RINGACC_RING_MODE_CREDENTIALS, + K3_NAV_RINGACC_RING_MODE_QM, + k3_NAV_RINGACC_RING_MODE_INVALID +}; + +/** + * enum k3_nav_ring_size - &struct k3_nav_ring_cfg elm_size + * + * RA ring element's sizes in bytes. + */ +enum k3_nav_ring_size { + K3_NAV_RINGACC_RING_ELSIZE_4 = 0, + K3_NAV_RINGACC_RING_ELSIZE_8, + K3_NAV_RINGACC_RING_ELSIZE_16, + K3_NAV_RINGACC_RING_ELSIZE_32, + K3_NAV_RINGACC_RING_ELSIZE_64, + K3_NAV_RINGACC_RING_ELSIZE_128, + K3_NAV_RINGACC_RING_ELSIZE_256, + K3_NAV_RINGACC_RING_ELSIZE_INVALID +}; + +struct k3_nav_ringacc; +struct k3_nav_ring; + +/** + * enum k3_nav_ring_cfg - RA ring configuration structure + * + * @size: Ring size, number of elements + * @elm_size: Ring element size + * @mode: Ring operational mode + * @flags: Ring configuration flags. Possible values: + * @K3_NAV_RINGACC_RING_SHARED: when set allows to request the same ring + * few times. It's usable when the same ring is used as Free Host PD ring + * for different flows, for example. + * Note: Locking should be done by consumer if required + */ +struct k3_nav_ring_cfg { + u32 size; + enum k3_nav_ring_size elm_size; + enum k3_nav_ring_mode mode; +#define K3_NAV_RINGACC_RING_SHARED BIT(1) + u32 flags; +}; + +#define K3_NAV_RINGACC_RING_ID_ANY (-1) +#define K3_NAV_RINGACC_RING_USE_PROXY BIT(1) + +/** + * k3_nav_ringacc_request_ring - request ring from ringacc + * @ringacc: pointer on ringacc + * @id: ring id or K3_NAV_RINGACC_RING_ID_ANY for any general purpose ring + * @flags: + * @K3_NAV_RINGACC_RING_USE_PROXY: if set - proxy will be allocated and + * used to access ring memory. Sopported only for rings in + * Message/Credentials/Queue mode. + * + * Returns pointer on the Ring - struct k3_nav_ring + * or NULL in case of failure. + */ +struct k3_nav_ring *k3_nav_ringacc_request_ring(struct k3_nav_ringacc *ringacc, + int id, u32 flags); + +/** + * k3_nav_ringacc_get_dev - get pointer on RA device + * @ringacc: pointer on RA + * + * Returns device pointer + */ +struct udevice *k3_nav_ringacc_get_dev(struct k3_nav_ringacc *ringacc); + +/** + * k3_nav_ringacc_ring_reset - ring reset + * @ring: pointer on Ring + * + * Resets ring internal state ((hw)occ, (hw)idx). + * TODO_GS: ? Ring can be reused without reconfiguration + */ +void k3_nav_ringacc_ring_reset(struct k3_nav_ring *ring); +/** + * k3_nav_ringacc_ring_reset - ring reset for DMA rings + * @ring: pointer on Ring + * + * Resets ring internal state ((hw)occ, (hw)idx). Should be used for rings + * which are read by K3 UDMA, like TX or Free Host PD rings. + */ +void k3_nav_ringacc_ring_reset_dma(struct k3_nav_ring *ring, u32 occ); + +/** + * k3_nav_ringacc_ring_free - ring free + * @ring: pointer on Ring + * + * Resets ring and free all alocated resources. + */ +int k3_nav_ringacc_ring_free(struct k3_nav_ring *ring); + +/** + * k3_nav_ringacc_get_ring_id - Get the Ring ID + * @ring: pointer on ring + * + * Returns the Ring ID + */ +u32 k3_nav_ringacc_get_ring_id(struct k3_nav_ring *ring); + +/** + * k3_nav_ringacc_ring_cfg - ring configure + * @ring: pointer on ring + * @cfg: Ring configuration parameters (see &struct k3_nav_ring_cfg) + * + * Configures ring, including ring memory allocation. + * Returns 0 on success, errno otherwise. + */ +int k3_nav_ringacc_ring_cfg(struct k3_nav_ring *ring, + struct k3_nav_ring_cfg *cfg); + +/** + * k3_nav_ringacc_ring_get_size - get ring size + * @ring: pointer on ring + * + * Returns ring size in number of elements. + */ +u32 k3_nav_ringacc_ring_get_size(struct k3_nav_ring *ring); + +/** + * k3_nav_ringacc_ring_get_free - get free elements + * @ring: pointer on ring + * + * Returns number of free elements in the ring. + */ +u32 k3_nav_ringacc_ring_get_free(struct k3_nav_ring *ring); + +/** + * k3_nav_ringacc_ring_get_occ - get ring occupancy + * @ring: pointer on ring + * + * Returns total number of valid entries on the ring + */ +u32 k3_nav_ringacc_ring_get_occ(struct k3_nav_ring *ring); + +/** + * k3_nav_ringacc_ring_is_full - checks if ring is full + * @ring: pointer on ring + * + * Returns true if the ring is full + */ +u32 k3_nav_ringacc_ring_is_full(struct k3_nav_ring *ring); + +/** + * k3_nav_ringacc_ring_push - push element to the ring tail + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element to the ring tail. Size of the ring element is + * determined by ring configuration &struct k3_nav_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + */ +int k3_nav_ringacc_ring_push(struct k3_nav_ring *ring, void *elem); + +/** + * k3_nav_ringacc_ring_pop - pop element from the ring head + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element from the ring head. Size of the ring element is + * determined by ring configuration &struct k3_nav_ring_cfg elm_size.. + * + * Returns 0 on success, errno otherwise. + */ +int k3_nav_ringacc_ring_pop(struct k3_nav_ring *ring, void *elem); + +/** + * k3_nav_ringacc_ring_push_head - push element to the ring head + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element to the ring head. Size of the ring element is + * determined by ring configuration &struct k3_nav_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + * Not Supported by ring modes: K3_NAV_RINGACC_RING_MODE_RING + */ +int k3_nav_ringacc_ring_push_head(struct k3_nav_ring *ring, void *elem); + +/** + * k3_nav_ringacc_ring_pop_tail - pop element from the ring tail + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element from the ring tail. Size of the ring element is + * determined by ring configuration &struct k3_nav_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + * Not Supported by ring modes: K3_NAV_RINGACC_RING_MODE_RING + */ +int k3_nav_ringacc_ring_pop_tail(struct k3_nav_ring *ring, void *elem); + +#endif /* __SOC_TI_K3_NAVSS_RINGACC_API_H_ */ diff --git a/include/linux/soc/ti/ti-udma.h b/include/linux/soc/ti/ti-udma.h new file mode 100644 index 00000000000..e9d4226c48d --- /dev/null +++ b/include/linux/soc/ti/ti-udma.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + */ + +#ifndef __TI_UDMA_H +#define __TI_UDMA_H + +/** + * struct ti_udma_drv_packet_data - TI UDMA transfer specific data + * + * @pkt_type: Packet Type - specific for each DMA client HW + * @dest_tag: Destination tag The source pointer. + * + * TI UDMA transfer specific data passed as part of DMA transfer to + * the DMA client HW in UDMA descriptors. + */ +struct ti_udma_drv_packet_data { + u32 pkt_type; + u32 dest_tag; +}; + +#endif /* __TI_UDMA_H */ diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h index 90d50536365..222cf665460 100644 --- a/include/linux/soc/ti/ti_sci_protocol.h +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -213,13 +213,42 @@ struct ti_sci_clk_ops { }; /** + * struct ti_sci_rm_core_ops - Resource management core operations + * @get_range: Get a range of resources belonging to ti sci host. + * @get_rage_from_shost: Get a range of resources belonging to + * specified host id. + * - s_host: Host processing entity to which the + * resources are allocated + * + * NOTE: for these functions, all the parameters are consolidated and defined + * as below: + * - handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * - dev_id: TISCI device ID. + * - subtype: Resource assignment subtype that is being requested + * from the given device. + * - range_start: Start index of the resource range + * - range_end: Number of resources in the range + */ +struct ti_sci_rm_core_ops { + int (*get_range)(const struct ti_sci_handle *handle, u32 dev_id, + u8 subtype, u16 *range_start, u16 *range_num); + int (*get_range_from_shost)(const struct ti_sci_handle *handle, + u32 dev_id, u8 subtype, u8 s_host, + u16 *range_start, u16 *range_num); +}; + +/** * struct ti_sci_core_ops - SoC Core Operations * @reboot_device: Reboot the SoC * Returns 0 for successful request(ideally should never return), * else returns corresponding error value. + * @query_msmc: Query the size of available msmc + * Return 0 for successful query else appropriate error value. */ struct ti_sci_core_ops { int (*reboot_device)(const struct ti_sci_handle *handle); + int (*query_msmc)(const struct ti_sci_handle *handle, + u64 *msmc_start, u64 *msmc_end); }; /** @@ -257,6 +286,230 @@ struct ti_sci_proc_ops { u32 *sts_flags); }; +#define TI_SCI_RING_MODE_RING (0) +#define TI_SCI_RING_MODE_MESSAGE (1) +#define TI_SCI_RING_MODE_CREDENTIALS (2) +#define TI_SCI_RING_MODE_QM (3) + +#define TI_SCI_MSG_UNUSED_SECONDARY_HOST TI_SCI_RM_NULL_U8 + +/* RA config.addr_lo parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID BIT(0) +/* RA config.addr_hi parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID BIT(1) + /* RA config.count parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID BIT(2) +/* RA config.mode parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_MODE_VALID BIT(3) +/* RA config.size parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID BIT(4) +/* RA config.order_id parameter is valid for RM ring configure TISCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ORDER_ID_VALID BIT(5) + +#define TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER \ + (TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_MODE_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID) + +/** + * struct ti_sci_rm_ringacc_ops - Ring Accelerator Management operations + * @config: configure the SoC Navigator Subsystem Ring Accelerator ring + * @get_config: get the SoC Navigator Subsystem Ring Accelerator ring + * configuration + */ +struct ti_sci_rm_ringacc_ops { + int (*config)(const struct ti_sci_handle *handle, + u32 valid_params, u16 nav_id, u16 index, + u32 addr_lo, u32 addr_hi, u32 count, u8 mode, + u8 size, u8 order_id + ); + int (*get_config)(const struct ti_sci_handle *handle, + u32 nav_id, u32 index, u8 *mode, + u32 *addr_lo, u32 *addr_hi, u32 *count, + u8 *size, u8 *order_id); +}; + +/** + * struct ti_sci_rm_psil_ops - PSI-L thread operations + * @pair: pair PSI-L source thread to a destination thread. + * If the src_thread is mapped to UDMA tchan, the corresponding channel's + * TCHAN_THRD_ID register is updated. + * If the dst_thread is mapped to UDMA rchan, the corresponding channel's + * RCHAN_THRD_ID register is updated. + * @unpair: unpair PSI-L source thread from a destination thread. + * If the src_thread is mapped to UDMA tchan, the corresponding channel's + * TCHAN_THRD_ID register is cleared. + * If the dst_thread is mapped to UDMA rchan, the corresponding channel's + * RCHAN_THRD_ID register is cleared. + */ +struct ti_sci_rm_psil_ops { + int (*pair)(const struct ti_sci_handle *handle, u32 nav_id, + u32 src_thread, u32 dst_thread); + int (*unpair)(const struct ti_sci_handle *handle, u32 nav_id, + u32 src_thread, u32 dst_thread); +}; + +/* UDMAP channel types */ +#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR 2 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR_SB 3 /* RX only */ +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBRR 10 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBVR 11 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR 12 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBVR 13 + +/* UDMAP channel atypes */ +#define TI_SCI_RM_UDMAP_ATYPE_PHYS 0 +#define TI_SCI_RM_UDMAP_ATYPE_INTERMEDIATE 1 +#define TI_SCI_RM_UDMAP_ATYPE_VIRTUAL 2 + +/* UDMAP channel scheduling priorities */ +#define TI_SCI_RM_UDMAP_SCHED_PRIOR_HIGH 0 +#define TI_SCI_RM_UDMAP_SCHED_PRIOR_MEDHIGH 1 +#define TI_SCI_RM_UDMAP_SCHED_PRIOR_MEDLOW 2 +#define TI_SCI_RM_UDMAP_SCHED_PRIOR_LOW 3 + +#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST 0 +#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_MONO 2 + +/* UDMAP TX/RX channel valid_params common declarations */ +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID BIT(0) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID BIT(1) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID BIT(2) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID BIT(3) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID BIT(4) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PRIORITY_VALID BIT(5) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_QOS_VALID BIT(6) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ORDER_ID_VALID BIT(7) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_SCHED_PRIORITY_VALID BIT(8) + +/** + * Configures a Navigator Subsystem UDMAP transmit channel + * + * Configures a Navigator Subsystem UDMAP transmit channel registers. + * See @ti_sci_msg_rm_udmap_tx_ch_cfg_req + */ +struct ti_sci_msg_rm_udmap_tx_ch_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_EINFO_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_PSWORDS_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID BIT(12) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID BIT(13) + u16 nav_id; + u16 index; + u8 tx_pause_on_err; + u8 tx_filt_einfo; + u8 tx_filt_pswords; + u8 tx_atype; + u8 tx_chan_type; + u8 tx_supr_tdpkt; + u16 tx_fetch_size; + u8 tx_credit_count; + u16 txcq_qnum; + u8 tx_priority; + u8 tx_qos; + u8 tx_orderid; + u16 fdepth; + u8 tx_sched_priority; +}; + +/** + * Configures a Navigator Subsystem UDMAP receive channel + * + * Configures a Navigator Subsystem UDMAP receive channel registers. + * See @ti_sci_msg_rm_udmap_rx_ch_cfg_req + */ +struct ti_sci_msg_rm_udmap_rx_ch_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_SHORT_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_LONG_VALID BIT(12) + u16 nav_id; + u16 index; + u16 rx_fetch_size; + u16 rxcq_qnum; + u8 rx_priority; + u8 rx_qos; + u8 rx_orderid; + u8 rx_sched_priority; + u16 flowid_start; + u16 flowid_cnt; + u8 rx_pause_on_err; + u8 rx_atype; + u8 rx_chan_type; + u8 rx_ignore_short; + u8 rx_ignore_long; +}; + +/** + * Configures a Navigator Subsystem UDMAP receive flow + * + * Configures a Navigator Subsystem UDMAP receive flow's registers. + * See @tis_ci_msg_rm_udmap_flow_cfg_req + */ +struct ti_sci_msg_rm_udmap_flow_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_EINFO_PRESENT_VALID BIT(0) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PSINFO_PRESENT_VALID BIT(1) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_ERROR_HANDLING_VALID BIT(2) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DESC_TYPE_VALID BIT(3) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SOP_OFFSET_VALID BIT(4) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_QNUM_VALID BIT(5) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_VALID BIT(6) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_VALID BIT(7) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_VALID BIT(8) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_SEL_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_SEL_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_SEL_VALID BIT(12) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_SEL_VALID BIT(13) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ0_SZ0_QNUM_VALID BIT(14) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ1_QNUM_VALID BIT(15) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ2_QNUM_VALID BIT(16) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ3_QNUM_VALID BIT(17) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PS_LOCATION_VALID BIT(18) + u16 nav_id; + u16 flow_index; + u8 rx_einfo_present; + u8 rx_psinfo_present; + u8 rx_error_handling; + u8 rx_desc_type; + u16 rx_sop_offset; + u16 rx_dest_qnum; + u8 rx_src_tag_hi; + u8 rx_src_tag_lo; + u8 rx_dest_tag_hi; + u8 rx_dest_tag_lo; + u8 rx_src_tag_hi_sel; + u8 rx_src_tag_lo_sel; + u8 rx_dest_tag_hi_sel; + u8 rx_dest_tag_lo_sel; + u16 rx_fdq0_sz0_qnum; + u16 rx_fdq1_qnum; + u16 rx_fdq2_qnum; + u16 rx_fdq3_qnum; + u8 rx_ps_location; +}; + +/** + * struct ti_sci_rm_udmap_ops - UDMA Management operations + * @tx_ch_cfg: configure SoC Navigator Subsystem UDMA transmit channel. + * @rx_ch_cfg: configure SoC Navigator Subsystem UDMA receive channel. + * @rx_flow_cfg: configure SoC Navigator Subsystem UDMA receive flow. + */ +struct ti_sci_rm_udmap_ops { + int (*tx_ch_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params); + int (*rx_ch_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params); + int (*rx_flow_cfg)( + const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_flow_cfg *params); +}; + /** * struct ti_sci_ops - Function support for TI SCI * @board_ops: Miscellaneous operations @@ -264,6 +517,7 @@ struct ti_sci_proc_ops { * @clk_ops: Clock specific operations * @core_ops: Core specific operations * @proc_ops: Processor specific operations + * @ring_ops: Ring Accelerator Management operations */ struct ti_sci_ops { struct ti_sci_board_ops board_ops; @@ -271,6 +525,10 @@ struct ti_sci_ops { struct ti_sci_clk_ops clk_ops; struct ti_sci_core_ops core_ops; struct ti_sci_proc_ops proc_ops; + struct ti_sci_rm_core_ops rm_core_ops; + struct ti_sci_rm_ringacc_ops rm_ring_ops; + struct ti_sci_rm_psil_ops rm_psil_ops; + struct ti_sci_rm_udmap_ops rm_udmap_ops; }; /** @@ -283,12 +541,42 @@ struct ti_sci_handle { struct ti_sci_version_info version; }; +#define TI_SCI_RESOURCE_NULL 0xffff + +/** + * struct ti_sci_resource_desc - Description of TI SCI resource instance range. + * @start: Start index of the resource. + * @num: Number of resources. + * @res_map: Bitmap to manage the allocation of these resources. + */ +struct ti_sci_resource_desc { + u16 start; + u16 num; + unsigned long *res_map; +}; + +/** + * struct ti_sci_resource - Structure representing a resource assigned + * to a device. + * @sets: Number of sets available from this resource type + * @desc: Array of resource descriptors. + */ +struct ti_sci_resource { + u16 sets; + struct ti_sci_resource_desc *desc; +}; + #if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL) const struct ti_sci_handle *ti_sci_get_handle_from_sysfw(struct udevice *dev); const struct ti_sci_handle *ti_sci_get_handle(struct udevice *dev); const struct ti_sci_handle *ti_sci_get_by_phandle(struct udevice *dev, const char *property); +u16 ti_sci_get_free_resource(struct ti_sci_resource *res); +void ti_sci_release_resource(struct ti_sci_resource *res, u16 id); +struct ti_sci_resource * +devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle, + struct udevice *dev, u32 dev_id, char *of_prop); #else /* CONFIG_TI_SCI_PROTOCOL */ @@ -309,6 +597,22 @@ const struct ti_sci_handle *ti_sci_get_by_phandle(struct udevice *dev, { return ERR_PTR(-EINVAL); } + +static inline u16 ti_sci_get_free_resource(struct ti_sci_resource *res) +{ + return TI_SCI_RESOURCE_NULL; +} + +static inline void ti_sci_release_resource(struct ti_sci_resource *res, u16 id) +{ +} + +static inline struct ti_sci_resource * +devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle, + struct udevice *dev, u32 dev_id, char *of_prop) +{ + return ERR_PTR(-EINVAL); +} #endif /* CONFIG_TI_SCI_PROTOCOL */ #endif /* __TISCI_PROTOCOL_H */ diff --git a/include/net.h b/include/net.h index dd52ed3f476..44b32385c40 100644 --- a/include/net.h +++ b/include/net.h @@ -92,12 +92,14 @@ enum eth_state_t { * @enetaddr: The Ethernet MAC address that is loaded from EEPROM or env * @phy_interface: PHY interface to use - see PHY_INTERFACE_MODE_... * @max_speed: Maximum speed of Ethernet connection supported by MAC + * @priv_pdata: device specific platdata */ struct eth_pdata { phys_addr_t iobase; unsigned char enetaddr[ARP_HLEN]; int phy_interface; int max_speed; + void *priv_pdata; }; enum eth_recv_flags { diff --git a/include/watchdog.h b/include/watchdog.h index 14073cfdd2f..3a357de903f 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -51,9 +51,15 @@ int init_func_watchdog_reset(void); #if defined(__ASSEMBLY__) #define WATCHDOG_RESET bl watchdog_reset #else - extern void watchdog_reset(void); + /* Don't require the watchdog to be enabled in SPL */ + #if defined(CONFIG_SPL_BUILD) && \ + !defined(CONFIG_SPL_WATCHDOG_SUPPORT) + #define WATCHDOG_RESET() {} + #else + extern void watchdog_reset(void); - #define WATCHDOG_RESET watchdog_reset + #define WATCHDOG_RESET watchdog_reset + #endif #endif #else /* |