diff options
Diffstat (limited to 'scripts/Makefile.build')
| -rw-r--r-- | scripts/Makefile.build | 357 |
1 files changed, 236 insertions, 121 deletions
diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 90aed148c44..998679f00a0 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -76,13 +76,17 @@ endif ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),) lib-target := $(obj)/lib.a +# Modified for U-Boot +# real-obj-y += $(obj)/lib-ksyms.o endif -ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) -builtin-target := $(obj)/built-in.o +ifneq ($(strip $(real-obj-y) $(need-builtin)),) +builtin-target := $(obj)/built-in.a endif +ifdef CONFIG_MODULES modorder-target := $(obj)/modules.order +endif # We keep a list of all modules in $(MODVERDIR) @@ -94,13 +98,17 @@ __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ # Linus' kernel sanity checking tool ifeq ($(KBUILD_CHECKSRC),1) quiet_cmd_checksrc = CHECK $< - cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; + cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< else ifeq ($(KBUILD_CHECKSRC),2) quiet_cmd_force_checksrc = CHECK $< - cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; + cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< +endif + +ifneq ($(KBUILD_ENABLE_EXTRA_GCC_CHECKS),) + cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $< endif -# Do section mismatch analysis for each module/built-in.o +# Do section mismatch analysis for each module/built-in.a ifdef CONFIG_DEBUG_SECTION_MISMATCH cmd_secanalysis = ; scripts/mod/modpost $@ endif @@ -109,113 +117,94 @@ endif # --------------------------------------------------------------------------- # Default is built-in, unless we know otherwise +$(foreach x, i ll lst o s symtypes, $(patsubst %.o,%.$(x),$(real-obj-m))): \ + part-of-module := y + modkern_cflags = \ $(if $(part-of-module), \ $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL)) -quiet_modtag := $(empty) $(empty) - -$(real-objs-m) : part-of-module := y -$(real-objs-m:.o=.i) : part-of-module := y -$(real-objs-m:.o=.s) : part-of-module := y -$(real-objs-m:.o=.lst): part-of-module := y - -$(real-objs-m) : quiet_modtag := [M] -$(real-objs-m:.o=.i) : quiet_modtag := [M] -$(real-objs-m:.o=.s) : quiet_modtag := [M] -$(real-objs-m:.o=.lst): quiet_modtag := [M] - -$(obj-m) : quiet_modtag := [M] - -# Default for not multi-part modules -modname = $(basetarget) - -$(multi-objs-m) : modname = $(modname-multi) -$(multi-objs-m:.o=.i) : modname = $(modname-multi) -$(multi-objs-m:.o=.s) : modname = $(modname-multi) -$(multi-objs-m:.o=.lst) : modname = $(modname-multi) -$(multi-objs-y) : modname = $(modname-multi) -$(multi-objs-y:.o=.i) : modname = $(modname-multi) -$(multi-objs-y:.o=.s) : modname = $(modname-multi) -$(multi-objs-y:.o=.lst) : modname = $(modname-multi) +quiet_modtag = $(if $(part-of-module),[M], ) quiet_cmd_cc_s_c = CC $(quiet_modtag) $@ -cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $< + cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS), $(c_flags)) $(DISABLE_LTO) -fverbose-asm -S -o $@ $< $(obj)/%.s: $(src)/%.c FORCE $(call if_changed_dep,cc_s_c) -quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@ -cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $< +quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@ +cmd_cpp_i_c = $(CPP) $(c_flags) -o $@ $< $(obj)/%.i: $(src)/%.c FORCE - $(call if_changed_dep,cc_i_c) + $(call if_changed_dep,cpp_i_c) -cmd_gensymtypes = \ +# These mirror gensymtypes_S and co below, keep them in synch. +cmd_gensymtypes_c = \ $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ - $(GENKSYMS) $(if $(1), -T $(2)) \ + scripts/genksyms/genksyms $(if $(1), -T $(2)) \ + $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS)) \ $(if $(KBUILD_PRESERVE),-p) \ -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ cmd_cc_symtypes_c = \ - set -e; \ - $(call cmd_gensymtypes,true,$@) >/dev/null; \ + $(call cmd_gensymtypes_c,true,$@) >/dev/null; \ test -s $@ || rm -f $@ $(obj)/%.symtypes : $(src)/%.c FORCE $(call cmd,cc_symtypes_c) +# LLVM assembly +# Generate .ll files from .c +quiet_cmd_cc_ll_c = CC $(quiet_modtag) $@ + cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -o $@ $< + +$(obj)/%.ll: $(src)/%.c FORCE + $(call if_changed_dep,cc_ll_c) + # C (.c) files # The C file is compiled and updated dependency information is generated. # (See cmd_cc_o_c + relevant part of rule_cc_o_c) quiet_cmd_cc_o_c = CC $(quiet_modtag) $@ + cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -ifndef CONFIG_MODVERSIONS -cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< - -else +ifdef CONFIG_MODVERSIONS # When module versioning is enabled the following steps are executed: -# o compile a .tmp_<file>.o from <file>.c -# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does -# not export symbols, we just rename .tmp_<file>.o to <file>.o and -# are done. +# o compile a <file>.o from <file>.c +# o if <file>.o doesn't contain a __ksymtab version, i.e. does +# not export symbols, it's done. # o otherwise, we calculate symbol versions using the good old # genksyms on the preprocessed source and postprocess them in a way # that they are usable as a linker script -# o generate <file>.o from .tmp_<file>.o using the linker to +# o generate .tmp_<file>.o from <file>.o using the linker to # replace the unresolved symbols __crc_exported_symbol with # the actual value of the checksum generated by genksyms +# o remove .tmp_<file>.o to <file>.o -cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< -cmd_modversions = \ - if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ - $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ +cmd_modversions_c = \ + if $(OBJDUMP) -h $@ | grep -q __ksymtab; then \ + $(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ > $(@D)/.tmp_$(@F:.o=.ver); \ \ - $(LD) $(KBUILD_LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ + $(LD) $(KBUILD_LDFLAGS) -r -o $(@D)/.tmp_$(@F) $@ \ -T $(@D)/.tmp_$(@F:.o=.ver); \ - rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ - else \ mv -f $(@D)/.tmp_$(@F) $@; \ - fi; + rm -f $(@D)/.tmp_$(@F:.o=.ver); \ + fi endif ifdef CONFIG_FTRACE_MCOUNT_RECORD -# gcc 5 supports generating the mcount tables directly -ifneq ($(call cc-option,-mrecord-mcount,y),y) -KBUILD_CFLAGS += -mrecord-mcount -else -# else do it all manually +ifndef CC_USING_RECORD_MCOUNT +# compiler will not generate __mcount_loc use recordmcount or recordmcount.pl ifdef BUILD_C_RECORDMCOUNT ifeq ("$(origin RECORDMCOUNT_WARN)", "command line") RECORDMCOUNT_FLAGS = -w endif # Due to recursion, we must skip empty.o. # The empty.o file is created in the make process in order to determine -# the target endianness and word size. It is made before all other C -# files, including recordmcount. +# the target endianness and word size. It is made before all other C +# files, including recordmcount. sub_cmd_record_mcount = \ if [ $(@) != "scripts/mod/empty.o" ]; then \ $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \ @@ -223,45 +212,97 @@ sub_cmd_record_mcount = \ recordmcount_source := $(srctree)/scripts/recordmcount.c \ $(srctree)/scripts/recordmcount.h else -sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ +sub_cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_SYS_BIG_ENDIAN),big,little)" \ "$(if $(CONFIG_64BIT),64,32)" \ "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)" \ "$(LD) $(KBUILD_LDFLAGS)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; recordmcount_source := $(srctree)/scripts/recordmcount.pl +endif # BUILD_C_RECORDMCOUNT +cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)), \ + $(sub_cmd_record_mcount)) +endif # CC_USING_RECORD_MCOUNT +endif # CONFIG_FTRACE_MCOUNT_RECORD + +ifdef CONFIG_STACK_VALIDATION +ifneq ($(SKIP_STACK_VALIDATION),1) + +__objtool_obj := $(objtree)/tools/objtool/objtool + +objtool_args = $(if $(CONFIG_UNWINDER_ORC),orc generate,check) + +objtool_args += $(if $(part-of-module), --module,) + +ifndef CONFIG_FRAME_POINTER +objtool_args += --no-fp endif -cmd_record_mcount = \ - if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \ - "$(CC_FLAGS_FTRACE)" ]; then \ - $(sub_cmd_record_mcount) \ - fi; -endif # -record-mcount +ifdef CONFIG_GCOV_KERNEL +objtool_args += --no-unreachable +endif +ifdef CONFIG_RETPOLINE + objtool_args += --retpoline +endif + +# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory +# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file +# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file +cmd_objtool = $(if $(patsubst y%,, \ + $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \ + $(__objtool_obj) $(objtool_args) $@) +objtool_obj = $(if $(patsubst y%,, \ + $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \ + $(__objtool_obj)) + +endif # SKIP_STACK_VALIDATION +endif # CONFIG_STACK_VALIDATION + +# Rebuild all objects when objtool changes, or is enabled/disabled. +objtool_dep = $(objtool_obj) \ + $(wildcard include/config/orc/unwinder.h \ + include/config/stack/validation.h) + +ifdef CONFIG_TRIM_UNUSED_KSYMS +cmd_gen_ksymdeps = \ + $(CONFIG_SHELL) $(srctree)/scripts/gen_ksymdeps.sh $@ >> $(dot-target).cmd endif define rule_cc_o_c - $(call echo-cmd,checksrc) $(cmd_checksrc) \ - $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \ - $(cmd_modversions) \ - $(call echo-cmd,record_mcount) \ - $(cmd_record_mcount) \ - scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ - $(dot-target).tmp; \ - rm -f $(depfile); \ - mv -f $(dot-target).tmp $(dot-target).cmd + $(call cmd,checksrc) + $(call cmd_and_fixdep,cc_o_c) + $(call cmd,gen_ksymdeps) + $(call cmd,checkdoc) + $(call cmd,objtool) + $(call cmd,modversions_c) + $(call cmd,record_mcount) +endef + +define rule_as_o_S + $(call cmd_and_fixdep,as_o_S) + $(call cmd,gen_ksymdeps) + $(call cmd,objtool) + $(call cmd,modversions_S) endef +# List module undefined symbols (or empty line if not enabled) +ifdef CONFIG_TRIM_UNUSED_KSYMS +cmd_undef_syms = $(NM) $@ | sed -n 's/^ *U //p' | xargs echo +else +cmd_undef_syms = echo +endif + # Built-in and composite module parts -$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE +$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE $(call cmd,force_checksrc) $(call if_changed_rule,cc_o_c) # Single-part modules are special since we need to mark them in $(MODVERDIR) -$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE +$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE $(call cmd,force_checksrc) $(call if_changed_rule,cc_o_c) - @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod) + @{ echo $(@:.o=.ko); echo $@; \ + $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod) quiet_cmd_cc_lst_c = MKLST $@ cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \ @@ -276,29 +317,83 @@ $(obj)/%.lst: $(src)/%.c FORCE modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) -$(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) -$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) +$(real-obj-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) +$(real-obj-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) + +# .S file exports must have their C prototypes defined in asm/asm-prototypes.h +# or a file that it includes, in order to get versioned symbols. We build a +# dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from +# the .S file (with trailing ';'), and run genksyms on that, to extract vers. +# +# This is convoluted. The .S file must first be preprocessed to run guards and +# expand names, then the resulting exports must be constructed into plain +# EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed +# to make the genksyms input. +# +# These mirror gensymtypes_c and co above, keep them in synch. +cmd_gensymtypes_S = \ + { echo "\#include <linux/kernel.h>" ; \ + echo "\#include <asm/asm-prototypes.h>" ; \ + $(CPP) $(a_flags) $< | \ + grep "\<___EXPORT_SYMBOL\>" | \ + sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ; } | \ + $(CPP) -D__GENKSYMS__ $(c_flags) -xc - | \ + scripts/genksyms/genksyms $(if $(1), -T $(2)) \ + $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS)) \ + $(if $(KBUILD_PRESERVE),-p) \ + -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) + +quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@ +cmd_cc_symtypes_S = \ + $(call cmd_gensymtypes_S,true,$@) >/dev/null; \ + test -s $@ || rm -f $@ + +$(obj)/%.symtypes : $(src)/%.S FORCE + $(call cmd,cc_symtypes_S) -quiet_cmd_as_s_S = CPP $(quiet_modtag) $@ -cmd_as_s_S = $(CPP) $(a_flags) -o $@ $< + +quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@ +cmd_cpp_s_S = $(CPP) $(a_flags) -o $@ $< $(obj)/%.s: $(src)/%.S FORCE - $(call if_changed_dep,as_s_S) + $(call if_changed_dep,cpp_s_S) quiet_cmd_as_o_S = AS $(quiet_modtag) $@ -cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + +ifdef CONFIG_MODVERSIONS + +ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h) + +ifneq ($(ASM_PROTOTYPES),) -$(obj)/%.o: $(src)/%.S FORCE - $(call if_changed_dep,as_o_S) +# versioning matches the C process described above, with difference that +# we parse asm-prototypes.h C header to get function definitions. -targets += $(real-objs-y) $(real-objs-m) $(lib-y) +cmd_modversions_S = \ + if $(OBJDUMP) -h $@ | grep -q __ksymtab; then \ + $(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ + > $(@D)/.tmp_$(@F:.o=.ver); \ + \ + $(LD) $(KBUILD_LDFLAGS) -r -o $(@D)/.tmp_$(@F) $@ \ + -T $(@D)/.tmp_$(@F:.o=.ver); \ + mv -f $(@D)/.tmp_$(@F) $@; \ + rm -f $(@D)/.tmp_$(@F:.o=.ver); \ + fi +endif +endif + +$(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE + $(call if_changed_rule,as_o_S) + +targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y) targets += $(extra-y) $(MAKECMDGOALS) $(always) targets += $(real-dtb-y) $(lib-y) $(always-y) # Linker scripts preprocessor (.lds.S -> .lds) # --------------------------------------------------------------------------- quiet_cmd_cpp_lds_S = LDS $@ - cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ + cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \ -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< $(obj)/%.lds: $(src)/%.lds.S FORCE @@ -320,17 +415,17 @@ $(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/tools/asn1_compiler $(sort $(subdir-obj-y)): $(subdir-ym) ; # -# Rule to compile a set of .o files into one .o file +# Rule to compile a set of .o files into one .a file (without symbol table) # ifdef builtin-target -quiet_cmd_link_o_target = AR $@ -# If the list of objects to link is empty, just create an empty built-in.o -cmd_link_o_target = $(if $(strip $(obj-y)),\ - rm -f $@; $(AR) cDPrsT $@ $(filter $(obj-y), $^), \ - rm -f $@; $(AR) cDPrsT$(KBUILD_ARFLAGS) $@) -$(builtin-target): $(obj-y) FORCE - $(call if_changed,link_o_target) +quiet_cmd_ar_builtin = AR $@ +# Modified for U-Boot, we create thin archives directly, instead of using the kernel script +# Check f49821ee32b76 and 6358d6e8b98 in kernel + cmd_ar_builtin = rm -f $@; $(AR) rcTP$(KBUILD_ARFLAGS) $@ $(real-prereqs) + +$(builtin-target): $(real-obj-y) FORCE + $(call if_changed,ar_builtin) targets += $(builtin-target) endif # builtin-target @@ -349,35 +444,48 @@ $(modorder-target): $(subdir-ym) FORCE $(Q)(cat /dev/null; $(modorder-cmds)) > $@ # -# Rule to compile a set of .o files into one .a file +# Rule to compile a set of .o files into one .a file (with symbol table) # ifdef lib-target -quiet_cmd_link_l_target = AR $@ -cmd_link_l_target = rm -f $@; $(AR) cDPrsT$(KBUILD_ARFLAGS) $@ $(lib-y) $(lib-target): $(lib-y) FORCE - $(call if_changed,link_l_target) + $(call if_changed,ar) targets += $(lib-target) -endif -quiet_cmd_link_multi-y = AR $@ -cmd_link_multi-y = rm -f $@; $(AR) cDPrsT$(KBUILD_ARFLAGS) $@ $(filter %.o,$^) +dummy-object = $(obj)/.lib_exports.o +ksyms-lds = $(dot-target).lds -quiet_cmd_link_multi-m = AR [M] $@ -cmd_link_multi-m = $(cmd_link_multi-y) +quiet_cmd_export_list = EXPORTS $@ +cmd_export_list = $(OBJDUMP) -h $< | \ + sed -ne '/___ksymtab/s/.*+\([^ ]*\).*/EXTERN(\1)/p' >$(ksyms-lds);\ + rm -f $(dummy-object);\ + echo | $(CC) $(a_flags) -c -o $(dummy-object) -x assembler -;\ + $(LD) $(ld_flags) -r -o $@ -T $(ksyms-lds) $(dummy-object);\ + rm $(dummy-object) $(ksyms-lds) -$(multi-used-y): FORCE - $(call if_changed,link_multi-y) -$(call multi_depend, $(multi-used-y), .o, -objs -y) +$(obj)/lib-ksyms.o: $(lib-target) FORCE + $(call if_changed,export_list) + +targets += $(obj)/lib-ksyms.o + +endif + +# NOTE: +# Do not replace $(filter %.o,^) with $(real-prereqs). When a single object +# module is turned into a multi object module, $^ will contain header file +# dependencies recorded in the .*.cmd file. +quiet_cmd_link_multi-m = LD [M] $@ +cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^) $(cmd_secanalysis) $(multi-used-m): FORCE $(call if_changed,link_multi-m) - @{ echo $(@:.o=.ko); echo $(filter %.o,$^); } > $(MODVERDIR)/$(@F:.o=.mod) -$(call multi_depend, $(multi-used-m), .o, -objs -y) - -targets += $(multi-used-y) $(multi-used-m) + @{ echo $(@:.o=.ko); echo $(filter %.o,$^); \ + $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod) +$(call multi_depend, $(multi-used-m), .o, -objs -y -m) +targets += $(multi-used-m) +targets := $(filter-out $(PHONY), $(targets)) # Add intermediate targets: # When building objects with specific suffix patterns, add intermediate @@ -385,9 +493,13 @@ targets += $(multi-used-y) $(multi-used-m) intermediate_targets = $(foreach sfx, $(2), \ $(patsubst %$(strip $(1)),%$(sfx), \ $(filter %$(strip $(1)), $(targets)))) +# %.asn1.o <- %.asn1.[ch] <- %.asn1 +# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts # %.lex.o <- %.lex.c <- %.l # %.tab.o <- %.tab.[ch] <- %.y -targets += $(call intermediate_targets, .lex.o, .lex.c) \ +targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \ + $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \ + $(call intermediate_targets, .lex.o, .lex.c) \ $(call intermediate_targets, .tab.o, .tab.c .tab.h) # Descending @@ -395,7 +507,7 @@ targets += $(call intermediate_targets, .lex.o, .lex.c) \ PHONY += $(subdir-ym) $(subdir-ym): - $(Q)$(MAKE) $(build)=$@ + $(Q)$(MAKE) $(build)=$@ need-builtin=$(if $(findstring $@,$(subdir-obj-y)),1) # Add FORCE to the prequisites of a target to force it to be always rebuilt. # --------------------------------------------------------------------------- @@ -409,14 +521,17 @@ FORCE: # optimization, we don't need to read them if the target does not # exist, we will rebuild anyway in that case. -cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd)) +existing-targets := $(wildcard $(sort $(targets))) -ifneq ($(cmd_files),) - include $(cmd_files) -endif +-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) # Create directories for object files if they do not exist obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets)))) +# If targets exist, their directories apparently exist. Skip mkdir. +existing-dirs := $(sort $(patsubst %/,%, $(dir $(existing-targets)))) +obj-dirs := $(strip $(filter-out $(existing-dirs), $(obj-dirs))) +ifneq ($(obj-dirs),) $(shell mkdir -p $(obj-dirs)) +endif .PHONY: $(PHONY) |