summaryrefslogtreecommitdiff
path: root/src/arm64/qcom/sm8550.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'src/arm64/qcom/sm8550.dtsi')
-rw-r--r--src/arm64/qcom/sm8550.dtsi335
1 files changed, 125 insertions, 210 deletions
diff --git a/src/arm64/qcom/sm8550.dtsi b/src/arm64/qcom/sm8550.dtsi
index bc5aeb05ffc..4c9820adcf5 100644
--- a/src/arm64/qcom/sm8550.dtsi
+++ b/src/arm64/qcom/sm8550.dtsi
@@ -58,11 +58,6 @@
clock-mult = <1>;
clock-div = <2>;
};
-
- pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- };
};
cpus {
@@ -357,8 +352,23 @@
reg = <0 0xa0000000 0 0>;
};
- pmu {
- compatible = "arm,armv8-pmuv3";
+ pmu-a510 {
+ compatible = "arm,cortex-a510-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu-a710 {
+ compatible = "arm,cortex-a710-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu-a715 {
+ compatible = "arm,cortex-a715-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu-x3 {
+ compatible = "arm,cortex-x3-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
};
@@ -776,8 +786,8 @@
#power-domain-cells = <1>;
clocks = <&bi_tcxo_div2>, <&sleep_clk>,
<&pcie0_phy>,
- <&pcie1_phy>,
- <&pcie_1_phy_aux_clk>,
+ <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+ <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
<&ufs_mem_phy 0>,
<&ufs_mem_phy 1>,
<&ufs_mem_phy 2>,
@@ -1774,7 +1784,7 @@
status = "disabled";
- pcie@0 {
+ pcieport0: pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
@@ -1928,7 +1938,7 @@
power-domains = <&gcc PCIE_1_PHY_GDSC>;
- #clock-cells = <0>;
+ #clock-cells = <1>;
clock-output-names = "pcie1_pipe_clk";
#phy-cells = <0>;
@@ -2910,6 +2920,7 @@
port@1 {
reg = <1>;
mdss_dp0_out: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};
};
};
@@ -3169,6 +3180,8 @@
#clock-cells = <1>;
#phy-cells = <1>;
+ orientation-switch;
+
status = "disabled";
ports {
@@ -3186,6 +3199,7 @@
reg = <1>;
usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
};
};
@@ -3193,6 +3207,7 @@
reg = <2>;
usb_dp_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp0_out>;
};
};
};
@@ -3264,6 +3279,7 @@
snps,has-lpm-erratum;
tx-fifo-resize;
dma-coherent;
+ usb-role-switch;
ports {
#address-cells = <1>;
@@ -3280,6 +3296,7 @@
reg = <1>;
usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
};
};
@@ -4295,12 +4312,14 @@
<0 0x25200000 0 0x200000>,
<0 0x25400000 0 0x200000>,
<0 0x25600000 0 0x200000>,
- <0 0x25800000 0 0x200000>;
+ <0 0x25800000 0 0x200000>,
+ <0 0x25a00000 0 0x200000>;
reg-names = "llcc0_base",
"llcc1_base",
"llcc2_base",
"llcc3_base",
- "llcc_broadcast_base";
+ "llcc_broadcast_base",
+ "llcc_broadcast_and_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -4571,8 +4590,6 @@
thermal-zones {
aoss0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 0>;
trips {
@@ -4591,8 +4608,6 @@
};
cpuss0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
trips {
@@ -4611,8 +4626,6 @@
};
cpuss1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
trips {
@@ -4631,8 +4644,6 @@
};
cpuss2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
trips {
@@ -4651,8 +4662,6 @@
};
cpuss3-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
trips {
@@ -4671,8 +4680,6 @@
};
cpu3-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
trips {
@@ -4697,8 +4704,6 @@
};
cpu3-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 6>;
trips {
@@ -4723,8 +4728,6 @@
};
cpu4-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
trips {
@@ -4749,8 +4752,6 @@
};
cpu4-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
trips {
@@ -4775,8 +4776,6 @@
};
cpu5-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
trips {
@@ -4801,8 +4800,6 @@
};
cpu5-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
trips {
@@ -4827,8 +4824,6 @@
};
cpu6-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 11>;
trips {
@@ -4853,8 +4848,6 @@
};
cpu6-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
trips {
@@ -4879,8 +4872,6 @@
};
cpu7-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 13>;
trips {
@@ -4905,8 +4896,6 @@
};
cpu7-middle-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 14>;
trips {
@@ -4931,8 +4920,6 @@
};
cpu7-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 15>;
trips {
@@ -4957,8 +4944,6 @@
};
aoss1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 0>;
trips {
@@ -4977,8 +4962,6 @@
};
cpu0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 1>;
trips {
@@ -5003,8 +4986,6 @@
};
cpu1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 2>;
trips {
@@ -5029,8 +5010,6 @@
};
cpu2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 3>;
trips {
@@ -5056,7 +5035,7 @@
cdsp0-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 4>;
trips {
@@ -5088,7 +5067,7 @@
cdsp1-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 5>;
trips {
@@ -5120,7 +5099,7 @@
cdsp2-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 6>;
trips {
@@ -5152,7 +5131,7 @@
cdsp3-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 7>;
trips {
@@ -5183,8 +5162,6 @@
};
video-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 8>;
trips {
@@ -5204,7 +5181,7 @@
mem-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens1 9>;
trips {
@@ -5229,8 +5206,6 @@
};
modem0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 10>;
trips {
@@ -5261,8 +5236,6 @@
};
modem1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 11>;
trips {
@@ -5293,8 +5266,6 @@
};
modem2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 12>;
trips {
@@ -5325,8 +5296,6 @@
};
modem3-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 13>;
trips {
@@ -5357,8 +5326,6 @@
};
camera0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 14>;
trips {
@@ -5377,8 +5344,6 @@
};
camera1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 15>;
trips {
@@ -5397,8 +5362,6 @@
};
aoss2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens2 0>;
trips {
@@ -5418,312 +5381,264 @@
gpuss-0-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 1>;
cooling-maps {
map0 {
- trip = <&gpu0_junction_config>;
+ trip = <&gpu0_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
- thermal-engine-config {
- temperature = <125000>;
+ gpu0_alert0: trip-point0 {
+ temperature = <85000>;
hysteresis = <1000>;
type = "passive";
};
- thermal-hal-config {
- temperature = <125000>;
+ trip-point1 {
+ temperature = <90000>;
hysteresis = <1000>;
- type = "passive";
- };
-
- reset-mon-config {
- temperature = <115000>;
- hysteresis = <5000>;
- type = "passive";
+ type = "hot";
};
- gpu0_junction_config: junction-config {
- temperature = <95000>;
- hysteresis = <5000>;
- type = "passive";
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
gpuss-1-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 2>;
cooling-maps {
map0 {
- trip = <&gpu1_junction_config>;
+ trip = <&gpu1_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
- thermal-engine-config {
- temperature = <125000>;
+ gpu1_alert0: trip-point0 {
+ temperature = <85000>;
hysteresis = <1000>;
type = "passive";
};
- thermal-hal-config {
- temperature = <125000>;
+ trip-point1 {
+ temperature = <90000>;
hysteresis = <1000>;
- type = "passive";
+ type = "hot";
};
- reset-mon-config {
- temperature = <115000>;
- hysteresis = <5000>;
- type = "passive";
- };
-
- gpu1_junction_config: junction-config {
- temperature = <95000>;
- hysteresis = <5000>;
- type = "passive";
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
gpuss-2-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 3>;
cooling-maps {
map0 {
- trip = <&gpu2_junction_config>;
+ trip = <&gpu2_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
- thermal-engine-config {
- temperature = <125000>;
+ gpu2_alert0: trip-point0 {
+ temperature = <85000>;
hysteresis = <1000>;
type = "passive";
};
- thermal-hal-config {
- temperature = <125000>;
+ trip-point1 {
+ temperature = <90000>;
hysteresis = <1000>;
- type = "passive";
+ type = "hot";
};
- reset-mon-config {
- temperature = <115000>;
- hysteresis = <5000>;
- type = "passive";
- };
-
- gpu2_junction_config: junction-config {
- temperature = <95000>;
- hysteresis = <5000>;
- type = "passive";
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
gpuss-3-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 4>;
cooling-maps {
map0 {
- trip = <&gpu3_junction_config>;
+ trip = <&gpu3_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
- thermal-engine-config {
- temperature = <125000>;
+ gpu3_alert0: trip-point0 {
+ temperature = <85000>;
hysteresis = <1000>;
type = "passive";
};
- thermal-hal-config {
- temperature = <125000>;
+ trip-point1 {
+ temperature = <90000>;
hysteresis = <1000>;
- type = "passive";
- };
-
- reset-mon-config {
- temperature = <115000>;
- hysteresis = <5000>;
- type = "passive";
+ type = "hot";
};
- gpu3_junction_config: junction-config {
- temperature = <95000>;
- hysteresis = <5000>;
- type = "passive";
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
gpuss-4-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 5>;
cooling-maps {
map0 {
- trip = <&gpu4_junction_config>;
+ trip = <&gpu4_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
- thermal-engine-config {
- temperature = <125000>;
+ gpu4_alert0: trip-point0 {
+ temperature = <85000>;
hysteresis = <1000>;
type = "passive";
};
- thermal-hal-config {
- temperature = <125000>;
+ trip-point1 {
+ temperature = <90000>;
hysteresis = <1000>;
- type = "passive";
- };
-
- reset-mon-config {
- temperature = <115000>;
- hysteresis = <5000>;
- type = "passive";
+ type = "hot";
};
- gpu4_junction_config: junction-config {
- temperature = <95000>;
- hysteresis = <5000>;
- type = "passive";
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
gpuss-5-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 6>;
cooling-maps {
map0 {
- trip = <&gpu5_junction_config>;
+ trip = <&gpu5_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
- thermal-engine-config {
- temperature = <125000>;
+ gpu5_alert0: trip-point0 {
+ temperature = <85000>;
hysteresis = <1000>;
type = "passive";
};
- thermal-hal-config {
- temperature = <125000>;
+ trip-point1 {
+ temperature = <90000>;
hysteresis = <1000>;
- type = "passive";
+ type = "hot";
};
- reset-mon-config {
- temperature = <115000>;
- hysteresis = <5000>;
- type = "passive";
- };
-
- gpu5_junction_config: junction-config {
- temperature = <95000>;
- hysteresis = <5000>;
- type = "passive";
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
gpuss-6-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 7>;
cooling-maps {
map0 {
- trip = <&gpu6_junction_config>;
+ trip = <&gpu6_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
- thermal-engine-config {
- temperature = <125000>;
+ gpu6_alert0: trip-point0 {
+ temperature = <85000>;
hysteresis = <1000>;
type = "passive";
};
- thermal-hal-config {
- temperature = <125000>;
+ trip-point1 {
+ temperature = <90000>;
hysteresis = <1000>;
- type = "passive";
+ type = "hot";
};
- reset-mon-config {
- temperature = <115000>;
- hysteresis = <5000>;
- type = "passive";
- };
-
- gpu6_junction_config: junction-config {
- temperature = <95000>;
- hysteresis = <5000>;
- type = "passive";
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
gpuss-7-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens2 8>;
cooling-maps {
map0 {
- trip = <&gpu7_junction_config>;
+ trip = <&gpu7_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
- thermal-engine-config {
- temperature = <125000>;
+ gpu7_alert0: trip-point0 {
+ temperature = <85000>;
hysteresis = <1000>;
type = "passive";
};
- thermal-hal-config {
- temperature = <125000>;
+ trip-point1 {
+ temperature = <90000>;
hysteresis = <1000>;
- type = "passive";
+ type = "hot";
};
- reset-mon-config {
- temperature = <115000>;
- hysteresis = <5000>;
- type = "passive";
- };
-
- gpu7_junction_config: junction-config {
- temperature = <95000>;
- hysteresis = <5000>;
- type = "passive";
+ trip-point2 {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
};
};
};
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-05 18:57:10 +0000