summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-08-13Merge with /home/sr/git/u-boot/denxWolfgang Denk
2006-08-11Merge with /home/raj/git/u-bootWolfgang Denk
2006-08-11Fix preboot message on TQM85xx after switching to hush parser.Wolfgang Denk
2006-08-11Adapt TQM85xx ramdisk address to Linux kernel memory mapWolfgang Denk
2006-08-11Fix PCI-Express on PPC440SPe rev. A.Rafal Jaworowski
2006-08-10Merge with /home/raj/git/u-bootWolfgang Denk
2006-08-10Add support for PCI-Express on PPC440SPe (Yucca board).Rafal Jaworowski
2006-08-10Fix compiler warning for TRAB board.Wolfgang Denk
Patch by Martin Krause, 07 Aug 2006
2006-08-07Merge with /home/tur/proj/usb_sticks/u-bootWolfgang Denk
2006-08-07Fix control-c handing in CONFIG_CMDLINE_EDITINGStefan Roese
Properly pass break code back from readline. Patch by Roger Blofeld, 31 Jul 2006
2006-08-07Add commandline history support to all AMCC eval boardsStefan Roese
Patch by Stefan Roese, 07 Aug 2006
2006-08-07Add Macronix MXLV320T flash support for AMCC BambooStefan Roese
Patch by Stefan Roese, 07 Aug 2006
2006-08-07Change "mii info" to not print an error upon missing PHY at addressStefan Roese
Patch by Stefan Roese, 07 Aug 2006
2006-08-03Prevent USB commands from working when USB is stopped.Bartlomiej Sieka
2006-08-02Add rudimentary handling of alternate settings of USB interfaces - to fixBartlomiej Sieka
problems with some USB storage devices. Some code readability improvements.
2006-07-28PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performanceStefan Roese
AMCC suggested to set the PMU bit to 0 for best performace on the PPC440 DDR controller. Please see doc/README.440-DDR-performance for details. Patch by Stefan Roese, 28 Jul 2006
2006-07-27Merge with /home/sr/git/u-boot/denxWolfgang Denk
2006-07-27AMCC bamboo (440EP) U-Boot image reduced to 384kbyteStefan Roese
Please see doc/README.bamboo for details. Patch by Stefan Roese, 27 Jul 2006
2006-07-27Fix CONFIG_CMDLINE_EDITING implementationStefan Roese
Patch by Stefan Roese, 27 Jul 2006
2006-07-26Fix preboot message on TQM5200 after switching to hush parser.Wolfgang Denk
2006-07-23MCC200: set default configuration to low_boot DDR,Wolfgang Denk
and support for configurable options high_boot and/or SDRAM.
2006-07-22Add support for 256 MB SDRAM on CPU87Wolfgang Denk
Patch by Josef Wagner, 25 Nov 2005
2006-07-22Add configuration for cam5200 board (based on TQM5200S).Wolfgang Denk
2006-07-21Code cleanupWolfgang Denk
2006-07-21Code cleanup.Wolfgang Denk
2006-07-21More code cleanupWolfgang Denk
2006-07-21Disabled kvme080 board in MAKEALL because of build problems.Wolfgang Denk
2006-07-21Code cleanupWolfgang Denk
2006-07-21Update NetStar boardWolfgang Denk
Patch by Ladislav Michl, 03 Nov 2005
2006-07-21Make code better readable.Wolfgang Denk
Patch by Ladislav Michl, 14 Sep 2005
2006-07-21Enable initrd ATAG for xm250 board.Wolfgang Denk
Patch by Josef Wagner, 05 Sep 2005
2006-07-21Document CONFIG_CMDLINE_EDITING in README.Wolfgang Denk
2006-07-21Minor code cleanup.Wolfgang Denk
2006-07-21Add readline cmdline-editing extensionWolfgang Denk
Patch by JinHua Luo, 01 Sep 2005
2006-07-21Add support for friendly-arm SBC-2410X boardWolfgang Denk
Patch by JinHua Luo, 01 Sep 2005
2006-07-21Fix multi-part image support on i386 platform.Wolfgang Denk
Patch by David Updegraff, 19 Aug 2005
2006-07-21Add support for KVME080 boardWolfgang Denk
Patch by Sangmoon Kim, 18 Aug 2005
2006-07-21Fix patch attribution.Wolfgang Denk
2006-07-21Fix MIPS LE build problemWolfgang Denk
Patch by Thomas Lange, 10 Aug 2005
2006-07-21Check argument count in "mii" command.Wolfgang Denk
Problem pointed out by Andrew Dyer, 13 Jun 2005
2006-07-21* Cleanup TQM5200 board configurations:Wolfgang Denk
- make highboot configurations use environment at high end, too, to avoid flash fragmentation - always use redundand environment - don't enable video code for modules without graphics controller - provide useful (though different) mtdparts settings - get rid of CONFIG_CS_AUTOCONF which was always set anyway * Extend mkconfig tool to print more useful target name
2006-07-19Add support for high-boot on TQM5200 and TQM5200S boards.Wolfgang Denk
Hint: the CPLD on the TQM5200 must be programmed with a software version supporting the high boot option! The new TQM5200S is already supporting this option. On the TQM5200 this option will be supported in configurations with MPC5200 rev B processors. To actually "high boot", set jumper X30 on the STK52xx. Patch by Martin Krause, 12 Jul 2006
2006-07-19Add support for new TQM5200 revisionsWolfgang Denk
- Support for TQM5200S (short version without graphic controller) - Support for modules with 'N' type S29GL128N Spansion flashes (requires changes to flash layout) - Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19Fix support for PS/2 keyboard on TQM85xx boardsWolfgang Denk
The PS/2 keyobard driver for the TQM85xx modules only supports the internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't include a DUART, the TQM8560 modules can't be used with the PS/2 keyboard controller on the STK85xx board. The PS/2 keyboard driver should work with the modules TQM8540, TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet. Make sure the PS/2 controller on the STK85xx is programmed. Jumper settings: X66 1-2, 9-10; X61 2-3 Patch by Martin Krause, 21 Jun 2006
2006-07-19Adjust RTC century handling on STK52xx board to match Linux driver.Wolfgang Denk
Patch by Martin Krause, 12 Jun 2006
2006-07-19Adjust filenames for USB update images on TRAB board.Wolfgang Denk
During an automatic update via USB stick, U-Boot searches for images with the name "firmware.img" and "kernel.img". This names are now changed to "firmw_01.img" and "kernl_01.img". This is done, to prevent updates of new boards (with the new macronics "c" step flashes) with old, incompatible firmware or kernel versions. Patch by Martin Krause, 21 Jun 2006
2006-07-19Bugfix in VFD routine on TRAB board.Wolfgang Denk
Make sure upper lext pixel can be set to blue, too (so far only red was possible). Patch by Martin Krause, 15 Feb 2006
2006-07-19Enable buffered flash writes for TB5200 board.Wolfgang Denk
2006-07-19Fix some bugs in TRAB board flash driver.Wolfgang Denk
- increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT - remove "Unlock Bypass" mode, because macronix flashes do not support this mode officially - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified for Intel compatible flashes, not for AMD compatible. Patch by Martin Krause, 15 Feb 2006
2006-07-19Add additional error messages to flash driver on TRAB boardWolfgang Denk
(for erase errors and timeout errors) Patch by Martin Krause, 14 Feb 2006
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-06 13:48:36 +0000