summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-04Tegra2: Add additional pin multiplexing featuresSimon Glass
This adds an enum for each pin and some functions for changing the pin muxing setup. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-09-04Tegra2: Add more clock supportSimon Glass
This adds functions to enable/disable clocks and reset to on-chip peripherals. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-09-04Tegra2: Add microsecond timer functionSimon Glass
These functions provide access to the high resolution microsecond timer and tidy up a global variable in the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-09-04ARM: remove broken "at91rm9200dk" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "m501sk" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "kb9202" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "csb637" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "cmc_pu2" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "at91cap9adk" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stelian Pop <stelian.pop@leadtechdesign.com>
2011-09-04ARM: remove broken "voiceblue" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "smdk2400" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Gary Jennejohn <garyj@denx.de>
2011-09-04ARM: remove broken "sbc2410x" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "netstar" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "mx1fs2" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "lpd7a40x" boardsWolfgang Denk
Remove lpd7a400 and lpd7a404 boards. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "edb93xx" boardsWolfgang Denk
Remove edb9301, edb9302, edb9302a, edb9307, edb9307a, edb9312, edb9315 and edb9315a boards. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-04ARM: remove broken "B2" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andrea Scian <andrea.scian@dave-tech.it>
2011-09-04ARM: remove broken "armadillo" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Rowel Atienza <rowel@diwalabs.com>
2011-09-04ARM: remove broken "assabet" boardWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: George G. Davis <gdavis@mvista.com>
2011-09-04ARM: versatile: drop warningsStefano Babic
Drop warning: "passing argument 1 of 'get_ram_size' discards qualifiers from pointer target type" Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Albert Aribaud <albert.u.boot@aribaud.net>
2011-09-04IMX: scb9328: drop warningsStefano Babic
Drop warning: "passing argument 1 of 'get_ram_size' discards qualifiers from pointer target type" Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Torsten Koschorrek <koschorrek@synertronixx.de>
2011-09-04MX31: imx31_litekit: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX31: mx31ads: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX5: mx51evk: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX35: mx35pdk: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX5: mx53loco: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jason Liu <r64343@freescale.com>
2011-09-04MX5: mx53evk: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jason Liu <r64343@freescale.com>
2011-09-04MX5: vision2: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX5: mx53smd: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-04MX5: mx53ard: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-04MX25: zmx25: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Matthias Weisser <weisserm@arcor.de>
2011-09-04MX5: efikamx: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Marek Vasut <marek.vasut@gmail.com>
2011-09-04MX31: QONG: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX35: make use of GPIO framework for MX35 processorStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX5: make use of GPIO framework for MX5 processorStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX31: make use of GPIO framework for MX31 processorStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX25: make use of GPIO framework for MX25 processorStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04IMX: uniform GPIO interface using GPIO frameworkStefano Babic
IMX processors has a slightly different interface to access GPIOs and do not make use of the provided GPIO framework. The patch substitutes mxc_ specific functions and make use of the API in asm/gpio.h Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX: MX35 / MX5: uniform clock command with powerpcStefano Babic
There was already a command to show the processor clocks for PowerPC (clocks). For i.MX, the "clockinfo" command was introduce. The patch sets the same command name used on PowerPC. A nasty and not needed newline is also dropped in the help for the command. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX35: MX35PDK: support additional RAM on CSD1Stefano Babic
Modules on mx35pdk have additional 128MB memory connected to CSD1. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04mx53: ddr3: Update DD3 initializationFabio Estevam
Updated mx53 ddr3 script in order to align with the latest Freescale version from July 8, 2011: -change ESDREF[REF_SEL]=01 (for 32KHz), from incorrect setting of 00 (64KHz) -change DDR3 MR0 write to "setmem /32 0x63fd901c = 0x052080b0" from "0x092080b0". This changes write recovery from 8 clocks to 6 clocks (in line with ESDCFG1[tWR]) Signed-off-by: Lily Zhang <r58066@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-04ARM: MX51: PLL errata workaroundDavid Jander
This is a port of the official PLL errata workaround from Freescale to mainline u-boot. The PLL's in the i.MX51 processor can go out of lock due to a metastable condition in an analog flip-flop when used at high frequencies. This workaround implements an undocumented feature in the PLL (dither mode), which causes the effect of this failure to be much lower (in terms of frequency deviation), avoiding system failure, or at least decreasing the likelihood of system failure. Signed-off-by: David Jander <david@protonic.nl>
2011-09-04ARM: versatilepb : drop warnings due to double definitionsStefano Babic
CONFIG_ARCH_VERSATILE_PB is defined twice - drop the define from config.h. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04omap4: increase SRAM budget to fix build errorAneesh V
Signed-off-by: Aneesh V <aneesh@ti.com> Cc: Dirk Behme <dirk.behme@googlemail.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Acked-by: Dirk Behme<dirk.behme@googlemail.com>
2011-09-04omap4: fix build warning due to signed unsigned comparisonAneesh V
Signed-off-by: Aneesh V <aneesh@ti.com>
2011-09-04mkimage: Fix 'Unknown OMAP image type - 5'Dirk Behme
Using mkimage with e.g. tools/mkimage -A arm -T firmware -O u-boot -d u-boot.bin foo.img gives a warning "Unknown OMAP image type - 5" while it seems that the image itself is created successfully. This does come from the patch "mkimage: Add OMAP boot image support". The method check_image_type in image_type_params is supposed to just return success or failure. However, for omap it also calls fprintf: static int omapimage_check_image_types(uint8_t type) { if (type == IH_TYPE_OMAPIMAGE) return EXIT_SUCCESS; else { fprintf(stderr, "Unknown OMAP image type - %x", type); return EXIT_FAILURE; } } All the other image checkers and no others have this, so the fix is to simply remove the fprintf. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> CC: John Rigby <john.rigby@linaro.org> CC: Aneesh V <aneesh@ti.com> CC: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-04omap: fix gpio related build breaksAneesh V
Signed-off-by: Aneesh V <aneesh@ti.com> Acked-by: Dirk Behme <dirk.behme@googlemail.com>
2011-09-03gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)Łukasz Majewski
This is a cosmetic patch, which is changing the gpio_ prefix to s5p_gpio_. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2011-09-03SMDKV310: MMC SPL: Remove unwanted dummy functionsChander Kashyap
Removed dummy functions in "mmc_spl/board/samsung/smdkv310/mmc_boot.c", @mmc_boot.c void do_undefined_instruction(struct pt_regs *pt_regs); void do_software_interrupt(struct pt_regs *pt_regs); void do_prefetch_abort(struct pt_regs *pt_regs); void do_data_abort(struct pt_regs *pt_regs); void do_not_used(struct pt_regs *pt_regs); void do_fiq(struct pt_regs *pt_regs); void do_irq(struct pt_regs *pt_regs); not required as called conditionally in start.S @start.S \#ifdef CONFIG_SPL_BUILD _undefined_instruction: .word _undefined_instruction _software_interrupt: .word _software_interrupt _prefetch_abort: .word _prefetch_abort _data_abort: .word _data_abort _not_used: .word _not_used _irq: .word _irq _fiq: .word _fiq _pad: .word 0x12345678 /* now 16*4=64 */ \#else _undefined_instruction: .word undefined_instruction _software_interrupt: .word software_interrupt _prefetch_abort: .word prefetch_abort _data_abort: .word data_abort _not_used: .word not_used _irq: .word irq _fiq: .word fiq _pad: .word 0x12345678 /* now 16*4=64 */ \#endif e.g. undefined_instruction: get_bad_stack bad_save_user_regs bl do_undefined_instruction Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
2011-09-03SMDKV310: Fix undefined reference errorChander Kashyap
Fix buld error: undefined reference to '__image_copy_end' and `save_boot_params'. start.o: In function `_image_copy_end_ofs': mmc_spl/board/samsung/smdkv310/start.S:44: undefined reference to `__image_copy_end' start.o: In function `reset': mmc_spl/board/samsung/smdkv310/start.S:137: undefined reference to `save_boot_params' Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-10 04:11:27 +0000