summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-19board: verdin-am62: add dram_init_banksizeStefan Eichenberger
Add the dram_init_banksize function to the board file to properly set DRAM memory sizes during boot. The commit bc07851897bd ("board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled") relocated the dram_init_banksize function from architecture specific initialization to the TI board initialization code. As a result, boards relying on the previous setup now require this function to be defined within their board file to handle DRAM sizing correctly. Without this function defined the following error appears during boot: ERROR: Failed to allocate 0x1000 bytes below 0x0. Fixes: bc07851897bd ("board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2025-02-18fs/erofs: fix an integer overflow in symlink resolutionGao Xiang
See the original report [1], otherwise len + 1 will be overflowed. Note that EROFS archive can record arbitary symlink sizes in principle, so we don't assume a short number like 4096. [1] https://lore.kernel.org/r/20250210164151.GN1233568@bill-the-cat Fixes: 830613f8f5bb ("fs/erofs: add erofs filesystem support") Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2025-02-18led: fix coverity scan errorHeiko Schocher
The following was reported by Covervity scan: *** CID 541279: (TAINTED_SCALAR) /drivers/led/led-uclass.c: 284 in led_get_function_name() 278 if (!ret) { 279 snprintf(uc_plat->name, LED_MAX_NAME_SIZE, 280 "%s:%s-%d", 281 cp ? "" : led_colors[color], 282 func ? func : "", enumerator); 283 } else { >>> CID 541279: (TAINTED_SCALAR) >>> Using tainted variable "color" as an index into an array "led_colors". Fix it. Addresses-Coverity-ID: 541279 (TAINTED_SCALAR) Link: https://lists.denx.de/pipermail/u-boot/2025-February/580250.html Signed-off-by: Heiko Schocher <hs@denx.de>
2025-02-18tools: use cryptographically safe RNGHeinrich Schuchardt
The PRNG implementing the random() function only has 2^31 states and therefore is unsafe to use for cryptography. Use arc4random() instead. Fixes: cc34f04efd63 ("tools: image-host.c: use random instead of rand") Addresses-Coverity-ID: 312953 Calling risky function Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-02-18power: regulator: tps65941: Fix voltage calculation for ldoUdit Kumar
As per TRM[0] Section 8.7.1 "TPS6594-Q1 Registers", LDOx_Vout bit 6-1, define the NVM voltage settings. Along side table 8-4 of above TRM, shows voltage to value mapping. Driver wrongly using bits 5-1 to calculate voltage, and to convert voltage to value driver was using buck's calculation. So fix those calculation. [0]: https://www.ti.com/lit/ds/symlink/tps6594-q1.pdf Fixes: 5d7dbd22cf7d ("power: regulator: tps65941: use function callbacks for conversion ops") Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
2025-02-18tpm: unconstify tpm_tis_chip_dataIlias Apalodimas
The struct contains an iomem pointer that we later remap and update. Remove const from the struct definition. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2025-02-17Gitlab: Add missing symlink for qemu_arm64_lwip boardenv fileTom Rini
When adding the symlink for the conf file so qemu_arm64_lwip uses qemu_arm64 configuration information, the symlink for the boardenv file was missed in Gitlab (but not Azure). Add that in now. Fixes: fd10d156db3f ("CI: add qemu_arm64_lwip to the test matrix") Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2025-02-16board: acer: picasso: add Acer Iconia Tab A500 supportSvyatoslav Ryhel
The Acer Iconia A500 is a tablet computer designed, developed and marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB and 32 GB models are available. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-15Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
Add empty weak assembler function armv8_switch_to_el2_prep() which is jumped to just before U-Boot determines which EL it is running in and decides which path to take to boot the Linux kernel. Add IH_TYPE_TFA_BL31 into supported images type, to allow implementation of board specific U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TFA_BL31, ...) TFA BL31 loadable handler for fitImages. This PR contains common hooks which are noop, R-Car Gen4 board specific implementation using these hooks is coming in next PR.
2025-02-15image: Add support for starting TFA BL31 as fitImage loadablesMarek Vasut
Add support for starting TFA from U-Boot running in EL3 as part of fitImage boot, so the user can start U-Boot in the highest privilege level on the platform, bundle TFA, Linux, DT into a single fitImage and boot such a bundle as a whole. There are two main benefits of this approach. First is the ability to run U-Boot in EL3, where it has unrestricted access to the entire system and can act as a useful debug tool, as it was always intended to be used. Second is the ability to easily and safely update of any component in the fitImage, be it TFA, Linux or DT. The boot process is similar to regular Linux with DT fitImage boot process, except the TFA has to be bundled into the fitImage. For the bundling instructions, see below. The TFA is started as a 'loadables' with custom U_BOOT_FIT_LOADABLE_HANDLER and armv8_switch_to_el2_prep() handling implemented in board code, and performing the handoff and boot in case the TFA was loaded. The loadables handler is optional and meant to set up any sort of handoff structures used by the TFA BL31 or perform any other setup that is needed by the blob. The custom armv8_switch_to_el2_prep() has to implement the jump to TFA BL31 with return to U-Boot just before booting the Linux kernel. Example fitImage image and configuration section: /dts-v1/; / { description = "Linux kernel with FDT blob and TFA BL31"; images { kernel-1 { ... }; fdt-1 { ... }; atf-1 { /* This is the TFA BL31 image */ description = "TFA BL31"; data = /incbin/("../build/plat/release/bl31.bin"); type = "tfa-bl31"; arch = "arm64"; os = "arm-trusted-firmware"; compression = "none"; load = <0x46400000>; entry = <0x46400000>; }; }; configurations { default = "conf-1"; conf-1 { description = "Boot Linux"; kernel = "kernel-1"; fdt = "fdt-1"; loadables = "atf-1"; /* This is the TFA BL31 loadable */ }; }; }; Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-02-15arm64: Add late jump to kernel board hookMarek Vasut
Add empty weak assembler function armv8_switch_to_el2_prep() which is jumped to just before U-Boot determines which EL it is running in and decides which path to take to boot the Linux kernel. This weak function is meant to be used by architecture specific code to implement jump to a firmware blob, which then returns right past this weak function and continues execution of U-Boot code which then boots the Linux kernel. One example of such use case is when U-Boot jump tp TFA BL31, which switches from EL3 to EL2 and then returns to U-Boot code newly running in EL2 and starts the Linux kernel. The weak function is called with caches already disabled and DM shut down. Any preparatory work or even loading of more data must be done in board_prep_linux(), this hook is meant only for the final jump to the firmware and return to U-Boot before booting Linux. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2025-02-13Merge branch 'misc' of https://source.denx.de/u-boot/custodians/u-boot-tegraTom Rini
Improvements for PMIC GPIO children, tegra20 pinmux driver fix, tegra dts updates, various small adjustments and tweaks.
2025-02-13mbedtls/external: remove broken git submoduleZHANG Yuntian
When we squash imported mbedtls, the git submodule "framework" was preserved in the commit. However, U-Boot itself does not use git submodule, and provides no .gitmodules file to specify the submodule repository. This is normally not an issue when cloning U-Boot repository. However, when U-Boot is imported as a submodule, this will break git option `--recurse-submodules` as it fails to resolve "framework". As we do not use the submodule, remove it to unbreak existing workflows. Fixes: 12f1212e95fe ("Merge commit '0344c602eadc0802776b65ff90f0a02c856cf53c' as 'lib/mbedtls/external/mbedtls'") Signed-off-by: ZHANG Yuntian <yt@radxa.com>
2025-02-13board: transformer-t30: fix model detectionSvyatoslav Ryhel
PCBID1 seems to be high not only on TF600T, but on TF700T as well, that caused boot failure for TF700T. Switching PCBID1 to PCBID7 should fix this issue. Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-13doc: board: tegra: update device informationSvyatoslav Ryhel
Adjust and update existing manuals to reflect the most recent updates. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-13ARM: tegra124: dts: mark HOST1X and DC with pre-relocation flagSvyatoslav Ryhel
Same as on previous SoC generations this is required for proper video output work. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12Merge branch 'u-boot-net-20250212' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-net CI: https://source.denx.de/u-boot/custodians/u-boot-net/-/pipelines/24577 net-lwip: * Fix incorrect selection of ethernet device on boards having more than one * Fix TFTP option processing * Make the WGET_HTTPS Kconfig symbol depend on DM_RNG lib: * Add strnstr()
2025-02-12net: Kconfig: depend on DM_RNG for WGET_HTTPSJerome Forissier
net/lwip/wget.c/mbedtls_hardware_poll() is calling dm_rng_read() but dependency is not recorded anywhere that's why depend on DM_RNG when WGET_HTTPS is used. Suggested-by: Michal Simek <michal.simek@amd.com> Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Tested-by: Michal Simek <michal.simek@amd.com>
2025-02-12net: use strnstr() for lwip_strnstr()Heinrich Schuchardt
Using strstr() instead of strnstr() creates a security concern. Fixes: 1c41a7afaa15 ("net: lwip: build lwIP") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
2025-02-12test: unit tests for strstr() and strnstr()Heinrich Schuchardt
Add unit tests for the library functions. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> [jf: drop unwanted change to lib/string.c] Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
2025-02-12lib: implement strnstr()Heinrich Schuchardt
Implement library function strnstr(). Implement strstr() using strnstr(). Sort the includes. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> [jf: replace <stdint.h> by <limits.h>, folded from next patch] Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
2025-02-12net: lwip: tftp: fix find_option()Heinrich Schuchardt
Find_option() is used to retrieve the block size value in an option acknowledgment in response to a request containing a block size option according to RFC2348. The format of an OACK response is described in RFC2347 as +-------+---~~---+---+---~~---+---+---~~---+---+---~~---+---+ | opc | opt1 | 0 | value1 | 0 | optN | 0 | valueN | 0 | +-------+---~~---+---+---~~---+---+---~~---+---+---~~---+---+ The current implementation of find_option() only works if * blksize is the first option * lwip_strnstr() ignores the length parameter, i.e. is implemented via strstr() The OACK messages starts with 0x00 0x06. If 'blksize' is the first option, strstr() reports a match when the first parameter points to 0x06. Adding the string length of 'blksize' plus 2 to the location of the 0x06 byte points to the value. Find_option() would report a match for option 'blksize' if the response contained an option called 'foo_blksize_bar'. In this case find_option() would return 'bar' as the value string. If 'blksize' were the second option, find_option() would return a pointer to the second character of the value string. Furthermore find_option() does not detect if the value string is NUL terminated. This may lead to a buffer overrun. Provide an implementation that correctly steps from option to option. Fixes: 27d7ccda94fa ("net: lwip: tftp: add support of blksize option to client") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (qemu_arm64_lwip) Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
2025-02-12net: lwip: move eth_init() out of new_netif()Jerome Forissier
Move the initialization of the ethernet devices out of the new_netif() function. Indeed, new_netif() accepts a struct device argument, which is expected to be valid and active. The activation and selection of this device are achieved by eth_init() (on first time the network stack is used) and eth_set_current(). This is what takes care of the ethrotate and ethact environment variables. Therefore, move these calls to a new function: net_lwip_set_current(), and use it whenever a net-lwip command is run. This patch hopefully fixes the incorrect net-lwip behavior observed on boards with multiple ethernet interfaces [1]. Tested on an i.MX8MPlus EVK equipped wih two ethernet ports. The dhcp command succeeds whether the cable is plugged into the first or second port. [1] https://lists.denx.de/pipermail/u-boot/2025-January/576326.html Reported-by: E Shattow <e@freeshell.de> Tested-by: E Shattow <e@freeshell.de> Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
2025-02-12ARM: tegra124: dts: add missing DSI nodesSvyatoslav Ryhel
Bind missing DSI and MIPI calibration devices. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12ARM: tegra30: dts: complete DSI nodesSvyatoslav Ryhel
Sync DSI nodes with Linux tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12ARM: tegra210: clock: implement PLLD2 supportSvyatoslav Ryhel
PLLD2 is a simple clock (controlled by 2 registers) and appears starting from T30. Primary use of PLLD2 is as main HDMI clock parent. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12ARM: tegra124: clock: implement PLLD2 supportSvyatoslav Ryhel
PLLD2 is a simple clock (controlled by 2 registers) and appears starting from T30. Primary use of PLLD2 is as main HDMI clock parent. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12board: asus: convert SPL to XPLSvyatoslav Ryhel
Not sure why these files were omitted, but SPL should be converted to XPL. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12pinctrl: tegra20: adjust pin type detectionSvyatoslav Ryhel
Pin detection on t20 depends on node name. With recent changes in node naming, let's remove '_' to be safe about both '_' or '-' use. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12pmic: palmas: bind sysreset to parent nodeSvyatoslav Ryhel
Bind SYSRESET child to parent node since it does not have its own node in the device tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-02-12pmic: max77663: bind children to parent nodeSvyatoslav Ryhel
Bind GPIO and SYSRESET children to parent node since they do not have their own nodes in the device tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-02-12Revert "drivers: gpio-uclass: support PMIC GPIO children"Svyatoslav Ryhel
Requesting of PMIC's GPIO child should be done by binding GPIO driver to PMIC's node is GPIO driver does not have its own node. This reverts commit c03cd98d1a163666b4addcdd9a34fc0c77dfd0a5. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-02-11configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2025-02-11Merge tag 'u-boot-dfu-20250211' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dfu u-boot-dfu-20250211: CI: - https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24556 Android: - Handle boot images with missing DTB Usb gadget: - Fix nullptr in g_dnl when serial# is unset - Add missing schedule() in f_mass_storage gadget - Add support for STih407 in dwc3-generic - Fix usb clocks on STih407 - Migrate STih407 to DM_USB_GADGET
2025-02-11configs: stih410-b2260: Enable CMD_USB_MASS_STORAGE flagPatrice Chotard
Enable CMD_USB_MASS_STORAGE flag. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-10-patrice.chotard@foss.st.com [mkorpershoek: fixed up commit footer] Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11board: stih410-b2260: Remove board_usb_init/cleanup()Patrice Chotard
Since DM_USB_GADGET is enable for this board, board_usb_init() and board_usb_cleanup() can be removed. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-9-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11configs: stih410-b2260: Enable DM_USB_GADGET flagPatrice Chotard
Enable DM_USB_GADGET flag. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-8-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11configs: stih410-b2260: Enable USB_DWC3_GENERIC and USB_DWC3_STI flagsPatrice Chotard
Enable USB_DWC3_GENERIC and USB_DWC3_STI flags. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20250130163547.512990-7-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11usb: dwc3-generic: Add STih407 supportPatrice Chotard
Add STi glue logic to manage the DWC3 HC on STiH407 SoC family. It configures the internal glue logic and syscfg registers. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20250130163547.512990-6-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11usb: dwc3-generic: Reorder includePatrice Chotard
Reorder include following rules available here : https://docs.u-boot.org/en/latest/develop/codingstyle.html#include-files Remove useless include files. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-5-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11usb: dwc3: Remove dwc3 glue driver support for STiPatrice Chotard
STi will migrate to dwc3-generic driver, dwc3-sti-glue driver can be removed. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20250130163547.512990-4-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11configs: stih410-b2260: Enable DM_REGULATOR flagPatrice Chotard
Since commit 6aa8bde8786d ("usb: host: ehci-generic: Remove DM_REGULATOR flag") device_get_supply_regulator() returns -ENOSYS which is not handle by ehci_enable_vbus_supply() and thus, ehci_usb_probe() return an error. By enabling DM_REGULATOR flag, device_get_supply_regulator() return -ENOENT which is handle and ehci_usb_probe() return 0. This fixed the following issue: stih410-b2260 =>usb start starting USB... Bus dwc3@9900000: Register 2000240 NbrPorts 2 Starting the controller USB XHCI 1.00 Bus usb@9a03c00: USB OHCI 1.0 Bus usb@9a03e00: probe failed, error -38 Bus usb@9a83c00: USB OHCI 1.0 Bus usb@9a83e00: probe failed, error -38 scanning bus dwc3@9900000 for devices... 1 USB Device(s) found scanning bus usb@9a03c00 for devices... data abort pc : [<7df929b4>] lr : [<7df92918>] reloc pc : [<7d6409b4>] lr : [<7d640918>] sp : 7c73b848 ip : 9cf13c5c fp : 7c879d08 r10: 7c85d040 r9 : 7c74ded0 r8 : 09a03c00 r7 : 00000002 r6 : 7c85d080 r5 : 7c86a040 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 7c85d080 r0 : 7c85d040 Flags: nzCv IRQs off FIQs off Mode SVC_32 Code: 05853ae4 0affffe2 e59a2010 e59a300c (e5832010) Resetting CPU ... Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-3-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11ARM: dts: sti: Add fixed clock for ehci and ohci nodes in stih410-b2260.dtsiPatrice Chotard
On STi platforms, all clocks are enabled by BOOTROM, so CONFIG_CLK is not set as no clock driver for STI exists. As ehci-generic and ohci-generic drivers are used on platforms where CONFIG_CLK is set, clk_get_bulk() returns-ENOSYS in case of stih410-b2260. To avoid this error, add fixed clocks for ehci and ohci nodes for stih410-b2260 to fix the following errors: Bus usb@9a03c00: ohci_generic usb@9a03c00: Failed to get clocks (ret=-19) Port not available. Bus usb@9a03e00: ehci_generic usb@9a03e00: Failed to get clocks (ret=-19) Port not available. Bus usb@9a83c00: ohci_generic usb@9a83c00: Failed to get clocks (ret=-19) Port not available. Bus usb@9a83e00: ehci_generic usb@9a83e00: Failed to get clocks (ret=-19) Port not available. scanning bus dwc3@9900000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-2-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11usb: gadget: f_mass_storage: Add schedule() in sleep_thread()Patrice Chotard
In case "ums" command is used on platforms which don't implement g_dnl_board_usb_cable_connected() and USB cable is not connected, we stay inside sleep_thread() forever and watchdog is triggered. Add schedule() call to avoid this issue. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20241202074644.5380-1-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-10Prepare v2025.04-rc2v2025.04-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2025-02-10CI: Drop extra condition for sjg labSimon Glass
The rules part of the template makes sure that this doesn't run until specifically requested. Drop the check in the script itself, so it is possible to trigger a run manually without re-pushing the tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2025-02-10Merge patch series "Enable MCU ESM reset"Tom Rini
Judith Mendez <jm@ti.com> says: This patch series enables ESM reset configuration in board_init_f for am62x and am62px devices. This is necessary in order for error events to reset the system. This patches are tested using watchdog to reset the system via ESM. Link: https://lore.kernel.org/r/20250129234403.574766-1-jm@ti.com
2025-02-10configs: am62*_evm_r5: Enable ESM and MISC configsSanthosh Kumar K
Enable CONFIG_SPL_DRIVERS_MISC, CONFIG_SPL_MISC, CONFIG_ESM_K3 to probe the Main ESM and MCU ESM nodes. Signed-off-by: Santhosh Kumar K <s-k6@ti.com> Signed-off-by: Judith Mendez <jm@ti.com>
2025-02-10arm: mach-k3: am62*_init: Probe ESM nodesSanthosh Kumar K
On AM62A and AM62P devices, it is possible to route Main ESM error events to MCU ESM. MCU ESM high error output can trigger the reset logic to reset the device. So, for these devices we have Main ESM and MCU ESM nodes in the device tree. Add functions to probe these nodes if CONFIG_ESM_K3 is enabled. Signed-off-by: Santhosh Kumar K <s-k6@ti.com> Signed-off-by: Judith Mendez <jm@ti.com>
2025-02-10include: env: phytec: Add optargs to K3 filesNathan Morrisson
Add the optargs variable so that we can set optional arguments while booting. Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com> Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-07 18:39:11 +0000