| Age | Commit message (Collapse) | Author |
|---|
|
Enable sysinfo smbios by default for arm64.
When SYSINFO_SMBIOS is enabled, disable QFW_SMBIOS.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Update the cmd according to the changes of the smbios library:
1. Refactor smbios cmd print functions to match the content defined
by the specification.
2. Add new print functions for Type 3, 4 and 7.
3. Remove the fallback string "Not specified" from smbios_get_string,
as the spec requires a NULL output for those undefined strings.
4. Update the test_cmd_smbios_sandbox pytest expected result to
align with the smbios library changes and add new pytest
test_cmd_smbios_sysinfo_verbose to test the verbose smbios
output.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Add common smbios information that can be used by all armv8
platforms and set it as default for qemu-arm64.
>From now smbios library can load values from here for those fields
doesn't exist in the sysinfo driver.
To run this with QEMU arm64, we need to dump the generated DTB
from QEMU first, merge it with the one we build and then re-run
QEMU with the merged DTB.
```
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu.dtb
cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb ./dts/dt.dtb | \
grep -v /dts-v1/) | dtc - -o merged.dtb
qemu-system-aarch64 -machine virt -nographic -bios u-boot.bin \
-dtb merged.dtb
```
For details please take reference on dt_qemu.rst
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Add sysinfo platform driver for all armv8 platforms to retrieve
hardware information on processor and cache.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add detailed SMBIOS information as following:
1. Missing fields in Type #3 and #4
2. Type #7
Add support to dynamic length of contained object handles and
elements.
As SMBIOS is a fundamental feature which is enabled for all
boards, in order to avoid increasing rom size, all detailed SMBIOS
information is under kconfig GENERATE_SMBIOS_TABLE_VERBOSE.
Board maintainers can determine whether to select this feature.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Current smbios library does not fully match to the specification.
It hardcodes values instead of exposing values from the device.
It does not reserve the space to support dynamic length for
contained object handles or elements and misses the handling of
a few of fields.
The refactoring of this patch includes:
1. Expose values from device via sysinfo interface.
2. Replace smbios_add_prop with smbios_add_prop_si to allow getting
string values from sysinfo.
3. Add smbios_get_val_si to get values from sysinfo or device tree.
4. Use sysinfo_get_data to get data area.
5. Reserve the space of contained object handles and elements.
6. Miscellaneous fixes in smbios.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Add sysinfo driver to retrieve smbios information (Type 4 and 7).
So that the smbios library can use it for getting values from the
hardware platform instead of device tree.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Adding sysinfo_get_data into sandbox ut test dm_test_sysinfo.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Add interface for sysinfo to access a data area from the platform.
This is useful to save/read a memory region of platform-specific
data.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
|
|
Move the smbios field definitions to a separated simple headfile,
which is a prerequisite to be included by dts files.
Add new definitions for cache information.
This patch also includes a few of code optimizations in smbios.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Adding binman node with target images description can be unwanted feature
but as of today there is no way to disable it.
Also on size constrained systems it is not useful to add binman description
to DTB.
Introduce BINMAN_DTB Kconfig symbol which allows separate DTB for target
from DTB for binman itself.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f1379d2587f9bf279a7a75c318aabbc1b35ee0c6.1730452668.git.michal.simek@amd.com
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/23573
Android:
- bootstd: Implement bootimage v2 support
- bootstd: Support non-A/B in bootmeth_android
- Migrate VIM3 and VIM3L to use bootmeth_android
- bootstd: Additional test for bootimage v2
- bootstd: Optimize load time when reading partitions
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/23563
- Make Siemens i.MX8 Capricorn board to boot U-Boot mainline again.
- Add support for phycore-imx93 2GB LPDDR4X variant.
- Add phycore-imx8mm EEPROM detection initialisation.
|
|
The current implementation is reading the whole partition for boot and
vendor_boot image which can be long following the size of the
partition or the time to read blocks (driver/SoC specific).
For example with mediatek mt8365 EVK board, we have a 64MiB boot
partition and the boot image flashed in this partition is only 42MiB.
It takes ~8-9 secs to read the boot partition.
Instead we can retrieved the boot image and vendor boot image size
with these new functions:
- android_image_get_bootimg_size
- android_image_get_vendor_bootimg_size
Use these information and read only the necessary.
By doing this with mt8365 EVK board, we read boot image in ~5 secs.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241121-bootmeth-android-part-sizes-v1-1-25760bbd0f08@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Rename actual android bootmethod test to specify it's for boot image
version 4.
Add a unit test for testing the Android bootmethod with boot image
version 2.
This requires another mmc image (mmc8) to contain the following
partitions:
- misc: contains the Bootloader Control Block (BCB)
- boot_a: contains a fake generic kernel image
we can test this with:
$ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc8.img
$ ./test/py/test.py --bd sandbox --build -k bootflow_android
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-5-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Actually khadas vim3 use distro command to boot android image.
Move on new bootmeth android for A/B and non-A/B vim3 android.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-4-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Actually khadas vim3l use distro command to boot android image.
Move on new bootmeth android for A/B and non-A/B vim3l android.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-3-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Update android bootmeth to support non-A/B image.
Enable AB support only when ANDROID_AB is enabled.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-2-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Android bootmeth only support boot image v3/4.
Add support of Android Boot Image version 2 [1].
Vendor boot image is only supported in version 3 and 4 so don't try to
read it when header version is less than 3.
[1] https://source.android.com/docs/core/architecture/bootloader/boot-image-header#header-v2
Tested-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241126-adnroidv2-v4-1-11636106dc69@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
Add EEPROM detection initialisation for phyCORE-i.MX8MM.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
|
|
The phyCORE-i.MX 93 is available in various variants (e.g. different ram
sizes, eMMC HS400 yes/no). Enable hardware introspection for the
imx93-phyboard-segin_defconfig, so that during startup the SOM module
variant can be detected, and the hardware can be configured accordingly.
The resulting SPL and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
|
|
The phyCORE-i.MX 93 is available in various variants. Relevant variant
options for the spl/u-boot are:
- with or without HS400 support for the eMMC
- with 1GB ram chip, or 2GB ram chip
The phyCORE's eeprom contains all information about the existing variant
options. Add evaluation of the eeprom data to the spl/u-boot to
enable/disable HS400 and to select the appropriate ram configuration at
startup.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
|
|
The phyCORE-i.MX 93 is available with a 1GB ram chip or a 2GB ram chip.
Add the ram timings for the 2GB chip, in form of a diff compared
to the existing LPDDR4X 1GB timings. With that, the SPL can select the
appropriate timings at startup.
Update also the 1GB ram timings with new version of the DDR Tool.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Tested-by: Primoz Fiser <primoz.fiser@norik.com>
|
|
update MAINTAINERS file, add some more board maintainers.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
|
|
The signal integrity test generates pattern on DDR lines
for certification. The signals must be as fast as possible
and unidirectional.
The test is required from our HW team. The available
u-boot memory test doesn't full fill the our requirements.
The test is planed to be used in all new siemens boards.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
Add siemens specific memory test. Enable it through Kconfig option
SPL_CMT. The test is required from our HW team. It runs over
temperature during many days:
* must run indefinitively through the *whole* DDR area,
so we cannot use linux memtest for example.
* must write/read/check all values
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
The eeprom contains the information on which module
we are running, so read it from the eeprom and print
it on the console.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
Get the memory region information from system controller to reduce the
number of platform specific headers. We were aligned on NXP mek board
implementation. This need at least 1 header per memory configuration.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
Add the HW version read directly from EEPROM.
EEPROM chip data structure is now in a .h file common to draco
and capricorn.
Therefore move out the definitions in draco board to siemens
common place.
From: Alessandro Zini <alessandro.zini@siemens.com>
Signed-off-by: Alessandro Zini <alessandro.zini@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
with newest SCFW build_info() works now, so call it
from checkboard() now.
As we only use uart2 as console, do not init uart0.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
|
|
add wdt device
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
sync spl code with 8qxp-mek board.
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
make savedefconfig and add SCU_WDT and fix environment
offsets, as since silicon c0 the boot container takes place
at offset 0 and so the u-boot-env must be moved outside of
the boot container area.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
|
|
sync the image names in imximage.cfg with
the ones used in arch/arm/dts/imx8qxp-u-boot.dtsi
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
fix wrong comment.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
|
|
Boards which use DCD data in SCFW can drop SPL.
We tried in our mainline rework to use this approach
too as other imx8qxp boards do in mainline. But we
failed ... it was a hard way to understand the
reason!
We cannot use DCD image in container as the SCFW
from siemens, does the RAM init on boot itself!
Siemens SCFW reads the RAM config from i2c eeprom and
dependent on this settings, initializes the RAM.
Adding DCD data to the bootcontainer will result in
hang of the SCFW, also DCD data in container image is
static which do not fit our needs.
So we must drop DCD data image, and this has the side
effect that we need SPL, as the task which loads the images
from the container only loads the images to addresses,
and if executed bit is set, starts them.
As now RAM is not initialized from it, and there is no
option to "wait until SCFW has setup RAM", we can only
load SPL into internal RAM at this point, as than SPL
and SCFW boot parallel.
The SPL itself then uses the SCU API to communicate
with the SCFW and it seems that SCFW only responds to
this API requests when RAM setup is already done by the
SCFW, which has a side-effect of a "sync" for the RAM
setup is done by SCFW!
We checked if SPL is always save in accessing RAM for
loading images to it! For tests, we added in our RAM
init part in the SCFW long delays (10 seconds and more)
as we thought there is such a sync missing, and we can
break the board through delaying RAM setup... but we
did not managed to fail booting U-Boot from SPL!
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
current generated flash.bin image does not longer
boot on cxg3 board.
Rename bootph-pre-ram to bootph-all so flash.bin
boots again!
Add u-boot specific change (add bootph-all property)
in A35_0 node to imx8qxp-capricorn-u-boot.dtsi
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
|
|
We have many HW with capricorn i.MX8X boards. The difference in u-boot is
at all by the display of the LEDs.
* put upstream a reference project & board for DT and defconfig
* use the capricorn prefix outside the board/siemens/capricorn folder
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
imx8qxp based boards which use SPL drop error when
calling make all:
"""
Writing image to './flash.bin'
Node '/binman/imx-boot/spl': GetData: size 0x0
Node '/binman/imx-boot': GetPaddedDataForEntry: size 0x0
Node '/binman/imx-boot': GetData: 1 entries, total size 0x0
Node '/binman/imx-boot': GetPaddedDataForEntry: size 0x0
Wrote 0x0 bytes
Image 'imx-boot' is missing external blobs and is non-functional: spl
/binman/imx-boot/spl (spl.bin):
Missing blob
Some images are invalid
"""
Guard creation of flash.bin with CONFIG_XPL_BUILD option.
Signed-off-by: Heiko Schocher <hs@denx.de>
Fixes: c9713c155127 ("imx8-u-boot: Fix SPL guard option")
|
|
when building U-Boot on imx8qxp and the board port uses
SPL, U-boot build shows
WARNING '.../spl/u-boot-spl.bin' not found, resulting binary is not-functional
This is because U-Boot binary is build first and Makefile
calls script imx_cntr_image.sh which checks if files
exists... but of course as spl is not yet build the
file `spl/u-boot-spl.bin` does not exist yet, so prevent
this warning.
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
Improve error message "header tag mismatched"
Add filename to error message to see, which file
is wrong.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
|
|
probing on capricorn board (imx8qxp based) brings:
Can't find FEC0 clk rate: -19
Cause is that when probing fec_mxc driver, fec_mii_setspeed()
is called which calls fec_get_clk_rate().
fec_mii_setspeed() calls fec_get_clk_rate with NULL pointer
for udev and so as in IMX8QXP case CLK_CCF is enabled
udev gets searched with:
uclass_get_device_by_seq(UCLASS_ETH, idx, &dev);
but we do not have yet a UCLASS_ETH ! as we just probing it!
Prevent this by passing udev to fec_get_clk_rate()
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
Driver for a PMIC watchdog timer controlled via Siemens SCU firmware
extensions. Only useful on some Siemens i.MX8-based platforms as
special SCFW is needed which provides the needed SCU API.
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
Prepare v2025.01-rc3
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-usb
- Fix two issues with the asix88179 driver
|
|
Fix missed rename from SPI_ADVANCE to SPI_STACKED_PARALLEL. This fixes
an issue encountered while testing the Zynq-7000 QSPI parallel Flash
implementation.
Fixes: f896aa656774 ("mtd: spi-nor: Rename SPI_ADVANCE to SPI_STACKED_PARALLEL")
Reviewed-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Dominik Wernberger <dominik.wernberger@gmx.de>
|
|
- Support for Microchip USB5744 hub
|
|
u-boot was crashing in qemu as the modeled hardware enforced overly
strict memory reads.
While this code will work on existing hardware, fix to avoid future issues.
Fixes: 12770d0df0e8 ("ast2600: spl: Add boot mode detection")
Link: https://gitlab.com/qemu-project/qemu/-/issues/2636
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The compiler will ignore it anyway:
include/linux/mtd/mtd.h:342:15: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
