summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-12ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repositoryPali Rohár
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git up to the commit 7c351731d196 ("Merge pull request #29 from pali/sync-a38x-uboot"). This patch was created by following steps: 1. Replace all a38x files in U-Boot tree by files from upstream github Marvell mv-ddr-marvell repository. 2. Run following command to omit portions not relevant for a38x and ddr3: files=drivers/ddr/marvell/a38x/* sed 's/#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)/#ifdef TRUE/' -i $files unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 -UCONFIG_APN806 \ -UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \ -UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DTRUE $files 3. Manually omit SPDX-License-Identifier changes from this patch as upstream license in upstream github repository contains long license texts and U-Boot is using just SPDX-License-Identifier. After applying this patch, a38x ddr3 code in upstream Marvell github repository and in U-Boot would be fully identical. So in future applying above steps could be used to sync code again. The only change in this patch is removal of dead code and some fixes with include files. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-12ddr: marvell: a38x: Add more space for additional info from SPDSujeet Baranwal
commit 258be123226f8f5cd516b7813fe201fb7d7416e9 upstream. At this moment, only page 0 of SPD is being read but to support smbios, we need to read page 1 also which has more info. In order to do that, we need to allocate more space. Signed-off-by: Sujeet Baranwal <sujeet.baranwal@cavium.com> Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com> Reviewed-by: Sujeet Kumar Baranwal <Sujeet.Baranwal@cavium.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <judge.packham@gmail.com>
2021-03-10Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
2021-03-10usb: mtu3: flush cache for next GPDChunfeng Yun
When flush cache of the current GPD and resume QMU, the controller will try to access the next GPD after processing the current one, if not flush the next GPD, the controller may get wrong GPD status. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2021-03-09Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Various minor fixes for x86
2021-03-09x86: Select advanced Intel code only if allowedSimon Glass
At present most of the Intel-specific code is built on all devices, even those which don't have software support for the features provided there. This means that any board can enable CONFIG_INTEL_ACPIGEN even if it does not have the required features. Add a new INTEL_SOC option to control this access. This must be selected by SoCs that can support the required features. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fixed a typo in arch/x86/Kconfig] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-03-09x86: Move INTEL_ACPIGEN to arch/x86Simon Glass
This option is better placed in the x86 code since it is not generic enough to be in the core code. Move it. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fixed a typo in arch/x86/Kconfig] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-03-09x86: Fix member check in intel_gnvsSimon Glass
When CONFIG_CHROMEOS is not enabled this currently does not build. Fix it. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-03-09x86: sizeof-array-div error in lpc_common_early_initHeinrich Schuchardt
Building qemu-x86_64_defconfig with GCC 11.0 fails with: arch/x86/cpu/intel_common/lpc.c: In function ‘lpc_common_early_init’: arch/x86/cpu/intel_common/lpc.c:56:40: error: expression does not compute the number of elements in this array; element type is ‘struct reg_info’, not ‘u32’ {aka ‘unsigned int’} [-Werror=sizeof-array-div] 56 | sizeof(values) / sizeof(u32)); | ^ arch/x86/cpu/intel_common/lpc.c:56:40: note: add parentheses around the second ‘sizeof’ to silence this warning arch/x86/cpu/intel_common/lpc.c:50:11: note: array ‘values’ declared here 50 | } values[4], *ptr; | ^~~~~~ Add parentheses to silence warning. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-03-08Merge tag 'u-boot-amlogic-20210308' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - button: adc: fix treshold typo - configs: meson64: add fdtoverlay_addr_r
2021-03-08Merge branch 'v2021.04-rc4' of https://github.com/lftan/u-bootTom Rini
- Add VAB support
2021-03-08configs: meson64: add fdtoverlay_addr_rNeil Armstrong
In order to support loading FTD Overlays when booting with the pxe command (or extlinux.conf), supported with [1], add the missing fdtoverlay_addr_r used to load the overlay before applying it to the FDT loaded at fdt_addr_r. [1] https://patchwork.ozlabs.org/project/uboot/patch/20210120085453.2783678-1-narmstrong@baylibre.com/ Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-03-08button: adc: fix treshold typoNeil Armstrong
Fix the treshold typo in code by threshold. Fixes: c0165c85c3 ("button: add a simple Analog to Digital Converter device based button driver") Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-03-08Makefile: socfpga: Add target to generate hex output for combined spl and dtbDalon Westergreen
Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex" is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to generate the final configuration bitstream for Intel SOCFPGA SOC64 devices. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08configs: socfpga: Add defconfig for Agilex with VAB supportSiew Chin Lim
Booting Agilex with Vendor Authorized Boot. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08configs: socfpga: soc64: Move CONFIG_BOOTCOMMAND to defconfigSiew Chin Lim
CONFIG_BOOTCOMMAND have been moved to Kconfig.boot. This patch move the CONFIG_BOOTCOMMAND macro from socfpga_soc64_common.h to *_defconfig file for both Stratix 10 and Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08arm: socfpga: dts: soc64: Update filename in binman node of FIT image with ↵Siew Chin Lim
VAB support FIT image of Vendor Authentication Coot (VAB) contains signed images. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08arm: socfpga: cmd: Support 'vab' commandSiew Chin Lim
Support 'vab' command to perform vendor authentication. Command format: vab addr len Authorize 'len' bytes starting at 'addr' via vendor public key Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-08arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)Siew Chin Lim
Vendor Authorized Boot is a security feature for authenticating the images such as U-Boot, ARM trusted Firmware, Linux kernel, device tree blob and etc loaded from FIT. After those images are loaded from FIT, the VAB certificate and signature block appended at the end of each image are sent to Secure Device Manager (SDM) for authentication. U-Boot will validate the SHA384 of the image against the SHA384 hash stored in the VAB certificate before sending the image to SDM for authentication. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-03-08arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64Siew Chin Lim
Create common macro TARGET_SOCFPGA_SOC64 for Stratix10 and Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-03-07Merge tag 'efi-2021-04-rc3-3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-04-rc3-3 New: * Provide library functions for converting UTF-8 streams either to code page 437 or Unicode code points. Bug fixes: * Fix the capsule update unit tests. * Use the terminal size of the video console if it is the primary output.
2021-03-07efi_loader: correct uboot_bin_env.its file formatHeinrich Schuchardt
Up to now the EFI capsule Python tests were always skipped. The reason is that mkimage fails with: uboot_bin_env.its:13.21-23.5: Warning (unit_address_vs_reg): /images/u-boot-bin@100000: node has a unit name, but no reg property uboot_bin_env.its:24.21-34.5: Warning (unit_address_vs_reg): /images/u-boot-env@150000: node has a unit name, but no reg property If a unit in a device-tree has an address, a reg property must be provided. But adding a reg property is not the solution here. Since 2017 unit addresses are disallowed for FIT, cf. common/image-fit.c:1624. So remove the unit addresses in uboot_bin_env.its. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-07lib/charset: UTF-8 stream conversionHeinrich Schuchardt
Provide functions to convert an UTF-8 stream to code page 437 or UTF-32. Add unit tests. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-07lib/charset: utf8_get() should return errorHeinrich Schuchardt
utf8_get() should return an error if hitting an illegal UTF-8 sequence and not silently convert the input to a question mark. Correct utf_8() and the its unit test. console_read_unicode() now will ignore illegal UTF-8 sequences. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-07efi_loader: carve out utf_to_cp()Heinrich Schuchardt
Carve out a function to translate a Unicode code point to an 8bit codepage. Provide a unit test for the new function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-07efi_loader: move codepage 437 tableHeinrich Schuchardt
Move the Unicode to codepage 437 table to charset.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-07efi_loader: console size of vidconsoleHeinrich Schuchardt
If stdout is 'vidconsole', we correctly set the console size. If stdout is 'vidconsole,serial', the video console is ignored. We should always evaluate the size of vidconsole if it is the primary console. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Convert qemu-ppce500 to driver model and enable additional driver support - bug fixes/updates in net-dsa driver, vid driver, move configs to kconfig - Update Maintainers of some powerpc, layerscape platforms
2021-03-05doc: Add a reST document for qemu-ppce500Bin Meng
Add a reST document to describe how to build and run U-Boot for the QEMU ppce500 machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Move board directory from board/freescale to board/emulationBin Meng
board/emulation is the place for other QEMU targets like x86, arm, riscv. Let's move the qemu-ppce500 board codes there. List me as a co-maintainer for this board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Drop fixed_sdram()Bin Meng
This function is not called anywhere. Only fsl_ddr_sdram_size() is necessary [1] for QEMU. Drop it. [1] arch/powerpc/cpu/mpc85xx/cpu.c::dram_init() Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Drop a custom env variable 'fdt_addr_r'Bin Meng
Now that we have switched to CONFIG_OF_CONTROL, and we can use the env variable 'fdtcontroladdr' directly instead of creating one that is duplicated. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Delete the temporary FDT virtual-physical mapping after U-Boot is ↵Bin Meng
relocated After U-Boot is relocated to RAM already, the previous temporary FDT virtual-physical mapping that was used in the pre-relocation phase is no longer needed. Let's delete the mapping. get_fdt_virt() might be used before and after relocation, update it to return different virtual address of FDT. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Enable RTC support via I2CBin Meng
The QEMU ppce500 target integrates a Freescale I2C controller and has a Pericom pt7c4338 RTC connected to it. Enable corresponding DM drivers so that 'date' command is actually useful. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Enable support for power off via GPIOBin Meng
The QEMU ppce500 target provides the power off functionality via the GPIO pin#0, and we can support this using the sysreset gpio poweroff driver. Let's enable it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05dm: sysreset: Add a Kconfig option for the 'reset' commandBin Meng
sysreset uclass driver provides an implementation of 'reset' command using the sysreset_ APIs unconditionally. It also supports the 'poweroff' command using the sysreset_ APIs, but under a Kconfig option CONFIG_SYSRESET_CMD_POWEROFF. Let's do the same for the 'reset' command, by introducing a new Kconfig option CONFIG_SYSRESET_CMD_RESET, and set it to on by default, to allow a board that don't have a sysreset reset driver yet, but have a sysreset poweroff driver to compile without any issue. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Enable GPIO supportBin Meng
QEMU ppce500 target integrates a GPIO controller that is compatible with the QorIQ GPIO controller. Enable the DM GPIO driver for it and the 'gpio' command. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05gpio: mpc8xxx: Support controller register physical address beyond 32-bitBin Meng
dev_read_addr_size_index() returns fdt_addr_t which might be a 64-bit physical address. This might be true for some 85xx SoCs whose CCSBAR is mapped beyond 4 GiB. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: mpc85xx: Add 'gpibe' register to 'struct ccsr_gpio'Bin Meng
Without this, the DM GPIO driver for MPC8xxx does not compile for MPC85xx SoCs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Enable VirtIO BLK supportBin Meng
Enable VirtIO BLK driver so that we can store a kernel image to a disk image and boot from there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05virtio: Fix VirtIO BLK driver dependencyBin Meng
The VirtIO BLK driver depends on the blk uclass driver. Add the dependency in the Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Enable VirtIO NET supportBin Meng
By default the QEMU ppce500 machine connects a VirtIO NET to the PCI controller, although it can be replaced to an e1000 NIC via additional command line options. Now that we have switched over to DM PCI, VirtIO support becomes possible. This commit enables the support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05cmd: Fix virtio command dependencyBin Meng
The 'virtio' command calls blk_common_cmd() which is only available when CONFIG_HAVE_BLOCK_DEVICE is on. Fix the Kconfig dependency. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Drop CONFIG_OF_BOARD_SETUPBin Meng
ft_board_setup() is now empty. Drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Switch over to use DM ETH and PCIBin Meng
At present the board supports non-DM version PCI and E1000 drivers. Switch over to use DM ETH and PCI by: - Rewrite the PCI address map functions using DM APIs - Enable CONFIG_MISC_INIT_R to do the PCI initialization and address map - Drop unnecessary ad-hoc config macros - Remove board_eth_init() in the board codes Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05pci: mpc85xx: Support 64-bit bus and cpu addressBin Meng
At present the driver only supports 32-bit bus and cpu address. The controller's outbound registers/fields for extended address are not programmed. Let's program them to support 64-bit bus and cpu address. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05pci: mpc85xx: Support controller register physical address beyond 32-bitBin Meng
devfdt_get_addr_index() returns fdt_addr_t which might be a 64-bit physical address. Use map_physmem() to return the virtual address that can be used by a 32-bit machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAWBin Meng
For the QEMU ppce500 machine, LAW registers are not implemented hence CONFIG_FSL_LAW is not turned on and all LAW APIs are not available. We should wrap all LAW registers programming in the mpc85xx PCI driver with CONFIG_FSL_LAW. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Switch over to use DM serialBin Meng
The QEMU ppce500 target integrates 2 NS16550 serial ports. Switch over to use the DM version of the driver by: - drop unnecessary ad-hoc config macros - add get_serial_clock() in the board codes Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05common: Move initr_addr_map() to a bit earlierBin Meng
At present initr_addr_map() is put at a late stage in the init_sequence_r[] calls. This won't work because lot of device driver initialization (e.g.: serial port) happens before it but is lack of the address translation support. This moves the call to a bit earlier, right after the DM initialization. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 01:53:16 +0000