summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-01Convert CONFIG_SYS_MONITOR_BASE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_BASE Note that for how this is re-used on some PowePC platforms, we introduce CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the CONFIG_VAL macro to get the correct value at build time, in the code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_NORFLASH_PS32BIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NORFLASH_PS32BIT Note that we also attempt to correct the behavior of the code here, which had been testing for "NORFLASH_PS32BIT" which would never be set, instead check for the now set "CONFIG_NORFLASH_PS32BIT", which results in some behavior change. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01at91: Switch to SD_BOOT / CONFIG_NAND_BOOTTom Rini
The values CONFIG_SYS_USE_NANDFLASH and CONFIG_SYS_USE_MMC serve the same purpose as CONFIG_SD_BOOT / CONFIG_NAND_BOOT so migrate to using these switches instead as they're already in Kconfig. Cc: Stelian Pop <stelian@popies.net> Cc: Heiko Schocher <hs@denx.de> Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_SRIO_PCIE_BOOT_SLAVE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SRIO_PCIE_BOOT_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_E300 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_E300 CONFIG_E5500 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01mx53loco: Convert CONFIG_DIALOG_POWER to KconfigTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01exynos: Drop CONFIG_DEVICE_TREE_LISTTom Rini
This value isn't used anywhere, drop it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_DEEP_SLEEP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DEEP_SLEEP Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01M5329EVB, M5373EVB: Remove CONFIG_NANDFLASH_SIZETom Rini
In the case of M5373EVB we always had NANDFLASH_SIZE=16, so just use it directly. In the case of M5329EVB we had not removed the rest of NAND support when saying we didn't have NAND, so instead use that to key off of rather than NANDFLASH_SIZE. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GPTom Rini
The value CONFIG_DB_784MP_GP is only used in the DDR code to refer to CONFIG_TARGET_DB_MV784MP_GP so just use that second value directly. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-01p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIMTom Rini
These are not referenced in code, drop. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCKS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CLOCKS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCK_SYNTHESIZER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CLOCK_SYNTHESIZER Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01exynos: Drop CONFIG_CLK_*Tom Rini
We only set one of these values ever at this point, so remove dead code. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-04-01Convert CONFIG_SYS_USE_NORFLASH et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_USE_NORFLASH CONFIG_SYS_USE_BOOT_NORFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01global: Remove CONFIG_SYS_USE_DATAFLASH*Tom Rini
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none of them now control anything further within their board config.h files, so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty blocks in the board config.h files. In a few places further clean up related logic. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_SDCARD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SDCARD CONFIG_SPIFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01am43xx_evm_qspiboot: Remove CONFIG_SYS_EXTRA_OPTIONSTom Rini
CONFIG_QSPI is not used in the code, drop this. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01MPC837XERDB: Move CONFIG_PCIE to KconfigTom Rini
Move this symbol to the board Kconfig file. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_LPUART et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LPUART CONFIG_LPUART_32B_REG And note that CONFIG_LPUART_32B_REG is unused in code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_LSCHLV2 to Kconfig et alTom Rini
This converts the following to Kconfig: CONFIG_LSCHLV2 CONFIG_LSXHL Cc: Michael Walle <michael@walle.cc> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Michael Walle <michael@walle.cc>
2022-04-01mpc8548cds: Rework CONFIG_LEGACY usageTom Rini
This CONFIG option is used in one place, so pick a more direct name and migrate to Kconfig. Rework the code slightly. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_KM_COGE5UN et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KM_COGE5UN CONFIG_KM_KIRKWOOD_128M16 CONFIG_KM_KIRKWOOD CONFIG_KM_KIRKWOOD_PCI CONFIG_KM_NUSA CONFIG_KM_SUSE2 Cc: Holger Brunck <holger.brunck@hitachienergy.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01kmtegr1: Drop CONFIG_KMTEGR1Tom Rini
The only usage of CONFIG_KMTEGR1 can be replaced by CONFIG_TARGET_KMTEGR1 so do so and remove this other symbol. Cc: Holger Brunck <holger.brunck@hitachienergy.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01keymile: Move sourcing of common KconfigTom Rini
The way board/keymile/Kconfig is written protects the options there from being parsed on non-keymile platforms. We cannot however safely source this file from multiple locations. This does not manifest as a problem currently as there are no choice statements inside of this file (nor the sub-Kconfig files it sources). However, moving some target selection to one of these files exposes the underlying problem. Rework things so that we have this file sourced in arch/Kconfig. Cc: Holger Brunck <holger.brunck@hitachienergy.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-04-01Convert CONFIG_EMMC_BOOT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_EMMC_BOOT CONFIG_MAC_ADDR_IN_SPIFLASH CONFIG_NAND_BOOT CONFIG_SPL_FSL_PBL CONFIG_SYS_FSL_DDR4 In this case we re-sync options that had been set in CONFIG_SYS_EXTRA_OPTIONS but should not have been as they have proper entries. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01mx28evk_auart_console: Remove CONFIG_SYS_EXTRA_OPTIONSTom Rini
This was only setting values not referenced in the code so remove it. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01stmark2: Migrate CONFIG_SYS_EXTRA_OPTIONS to KconfigTom Rini
This platform is the only one to set these options, so define them in the board Kconfig file. Cc: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_MCFRTC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MCFRTC CONFIG_SYS_MCFRTC_BASE While at it, remove '#undef RTC_DEBUG' from these config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01stmark2: Remove CONFIG_SERIAL_FLASHTom Rini
This is not referenced anywhere, remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_MCFTMR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MCFTMR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CF_DSPI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CF_DSPI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01atmel: Remove CONFIG_SPL_ATMEL_SIZETom Rini
This seems to be unused in the code, remove it. Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Remove CONFIG_BOARDNAME and CONFIG_BOARD_NAMETom Rini
Both of these variables are used in a few hard-coded ways to set some string values or print something to the user. In almost all cases, it's just as useful to hard-code the value used. The exception here is printing something closer to correct board name for p1_p2_rdb machines. This can be done using something from the device tree, but for now hard-code a non-CONFIG based value instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_BITBANGMII_MULTI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BITBANGMII_MULTI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_BCM2835_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BCM2835_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Finish converting CONFIG_BOOTM_NETBSD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTM_NETBSD CONFIG_BOOTM_RTEMS CONFIG_DESIGNWARE_WATCHDOG CONFIG_DISPLAY_CPUINFO CONFIG_DM_ETH CONFIG_DM_MMC CONFIG_DM_REGULATOR CONFIG_DM_SPI CONFIG_DM_SPI_FLASH CONFIG_ISO_PARTITION CONFIG_OF_SEPARATE CONFIG_SPI_FLASH_WINBOND CONFIG_SPL_ETH CONFIG_TIMER CONFIG_USB_DWC3 CONFIG_USB_DWC3_GADGET CONFIG_USB_DWC3_OMAP CONFIG_USB_DWC3_PHY_OMAP CONFIG_USB_EHCI_TEGRA CONFIG_USB_GADGET_DOWNLOAD CONFIG_USB_GADGET_DUALSPEED CONFIG_USB_GADGET_MANUFACTURER CONFIG_USB_GADGET_PRODUCT_NUM CONFIG_USB_GADGET_VBUS_DRAW CONFIG_USB_GADGET_VENDOR_NUM This catches a number of cases where board config files were #undef various CONFIG options when building SPL, and that doesn't work. Clean up the related comments as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01CI: Update unmigrated symbol checkTom Rini
We need to check for config header files that #undef migrated symbols as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01am33xx: musb: Remove unused configuration logicTom Rini
At this point DM and OF_CONTROL are used to configure how the USB ports are enabled, with the exception of in SPL and no SPL_OF_CONTROL. Remove a bunch of now unused logic to simplify the code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMERClément Léger
Enable CONFIG_ATMEL_TCB_TIMER and disable CONFIG_ATMEL_PIT_TIMER. This will allow using the TCB timer instead of the PIT one when running under OP-TEE. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
2022-04-01ARM: dts: at91: sama5d2: add u-boot, dm-pre-reloc property for TCBClément Léger
In order to use the TCB early in boot and in the SPL, add u-boot,dm-pre-reloc property for the TCB and the clock that is used by the driver (tcb0_clk). Signed-off-by: Clément Léger <clement.leger@bootlin.com>
2022-04-01ARM: dts: at91: sama5d2: add TCB nodeClément Léger
Add the device-tree node to describe the TCB timer. Signed-off-by: Clément Léger <clement.leger@bootlin.com>
2022-04-01ARM: dts: at91: sama5d2: add AIC nodeClément Léger
When using interrupts property, a global interrupt controller needs to be added to avoid warnings when compiling device-tree: arch/arm/dts/at91-sama5d2_xplained.dtb: Warning (interrupts_property): /ahb/apb/timer@f800c000: Missing interrupt-parent Add AIC node as the sama5d2 global interrupt controller. Signed-off-by: Clément Léger <clement.leger@bootlin.com>
2022-04-01timer: atmel_tcb_timer: add atmel_tcb driverClément Léger
Add a driver for the timer counter block that can be found on sama5d2. This driver will be used when booting under OP-TEE since the pit timer which is part of the SYSC is secured. Channel 1 & 2 are configured to be chained together which allows to have a 64bits counter. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
2022-04-01ARM: dts: at91: sama7g5/sama7g5ek: align with Linux DTEugen Hristev
Align the DT for sama7g5 SoC and sama7g5 EK board with Linux devicetree in version 5.18. Some things remain still different, due to some things yet unimplemented in certain drivers. These include in PMC, pinctrl, and others. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-04-01ARM: dts: at91: rename sama7g5ek.dts to at91-sama7g5ek.dtsEugen Hristev
In Linux this DT file is named at91-sama7g5ek.dts. Rename it accordingly. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-04-01board: at91: sama5d2: set blue led on at boot timeMihai Sain
Set blue led on at boot time in order to highlight that u-boot is loaded. This is done for all sama5d2 based boards which contain an RGB led. Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2022-04-01ARM: at91: sama7g5: Reset external devices at software resetTudor Ambarus
sama7g5 and other SoCs (sama5d3, sam9x60) define in the Reset Controller a RSTC_CR.EXTRST bit that asserts the nrst_out pin which resets external devices. This is particular useful for external devices that are configured in stateful modes which can not be undone without reconfiguring the device or without resetting the device. An example is an SPI NOR flash that is configured in octal mode. The do_reset u-boot cmd does not call any driver's remove method, but merely resets the CPU. As the code was, this left the flash in octal mode, being impossible for the first stage boot loaders to recover/identify the flash after a "software reset". RSTC_CR.EXTRST comes in handy here, as it can be set at "software reset" to assert low the nrst_out pin during a time defined by the RSTC_MR.ERSTL field and reset the external devices (including the SPI NOR flash in the example). nrst_out is always asserted at "user reset" and it resets the external devices correctly. Asserting nrst_out at "software reset" should behave in a similar way. The only difference that I could find between the two types of resets in regards to the nrst_out signal, is that at "user reset" timing diagram the "Processor and Peripherals Reset Line" rises after six MD_SLCK cycles after the nrst_out line rose, while at the "software reset" timing diagram the "Processor and Peripherals Reset Line" is active for 3 MD_SLCK cycles + 2 MCK cycles. In other words, in the "software reset" case the nrst_out signal can be active for a longer period of time than the "Processor and Peripherals Reset Line" active time, depending on the RSTC_MR.ERSTL value. Using the default value (zero) for RSTC_MR.ERSTL, worked just fine for the sama7g5 case. Tested QSPI0 and GMAC0/GMAC1 on sama7g5ek rev 4 after a software reset with RSTC_CR.EXTRST=1 and RSTC_MR.ERSTL=0. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-04-01configs: Convert AT91RESET_EXTRST to KconfigTudor Ambarus
Convert AT91RESET_EXTRST to Kconfig for easier integration. The symbol is not configurable from menuconfig, it will be automatically selected by SoCs that select it explicitly via the "select" directive. AT91RESET_EXTRST sets the Reset Controller's RSTC_CR.EXTRST bit which asserts the nrst_out pin that resets external devices. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2022-04-01ARM: at91: sama5d2: Enable the use of Galois Tables from ROMTudor Ambarus
sama5d2 contains in its ROM memory BCH code tables for NAND Flash ECC correction. Enable the use of the GF tables defined in ROM. This should speed up the boot process, as the tables are no longer constructed at runtime. Tested with sama5d2-ptc-ek. Reported-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-14 17:29:02 +0000