summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-05video: Fix video sync kernel-doc formatMichal Simek
Place description below function parameters to make kernel-doc stript happy. Also rename dev to vid to be aligned with function parameters. Fixes: 1acafc73bfc7 ("dm: video: Add a video uclass") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-05fru: ops: avoid out of bounds accessHeinrich Schuchardt
Building xilinx_zynq_virt_defconfig fails on origin/next as reported by GCC 10.2 (as provided by Debian Bullseye): CC board/xilinx/common/fru_ops.o board/xilinx/common/fru_ops.c: In function ‘fru_capture’: board/xilinx/common/fru_ops.c:173:8: error: array subscript 284 is outside array bounds of ‘struct fru_table[1]’ [-Werror=array-bounds] 173 | limit = data + sizeof(struct fru_board_data); | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ board/xilinx/common/fru_ops.c:17:18: note: while referencing ‘fru_data’ 17 | struct fru_table fru_data __section(.data); | ^~~~~~~~ When using sizeof(struct fru_board_data) to find the end of the structure you should add it to the start of the structure. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-05zynq: mtd: nand: remove superfluous ifHeinrich Schuchardt
This sort of code does not make much sense: if (ondie_ecc_enabled) { if (ondie_ecc_enabled) { Remove the inner if. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-05arm64: zynqmp: Add Ethernet node for zcu1285 revAHarini Katakam
This patch add ethernet node gem1 to zcu1285 RevB. GMII to RGMII converter sits between MAC and external phy connected over GMII to MAC and RGMMI to external phy Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-05arm64: zynqmp: Add ethernet node for zcu1275 revBSiva Durga Prasad Paladugu
This patch add ethernet node gem1 to zcu1275 RevB. GMII to RGMII converter sits between MAC and external phy connected over GMII to MAC and RGMMI to external phy. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04spi: zynqmp_gqspi: Fix unaligned data writes issueT Karthik Reddy
When unaligned 3 bytes data write operation is performed, 3rd byte is being over written by 1st byte of 3 bytes data. This patch fixes it. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04microblaze: Add nor device to distro bootT Karthik Reddy
Add parallel nor device to distroboot for microblaze. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04microblaze: Set script_offset_nor env variableT Karthik Reddy
Set script_offset_nor env variable using CONFIG_BOOT_SCRIPT_OFFSET and nor flash start address to keep bootscript offset configurable. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04arm64: zynqmp: Sync DT with Linux kernelMichal Simek
All changes are recorded in lore.kernel.org. Here are links to that patches for the record. Link: https://lore.kernel.org/r/f59a63d8cb941592de6d2dee8afa6f120b2e40c8.1601379794.git.michal.simek@xilinx.com Link: https://lore.kernel.org/r/68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com Link: https://lore.kernel.org/r/f767fe007e446a2299fda9905e75b723c650a424.1605021644.git.michal.simek@xilinx.com Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com Link: https://lore.kernel.org/r/20200629081744.13916-1-krzk@kernel.org And there are other minor changes (just moving things around). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04serial: uartlite: Fix uninitialized ret in debug uartliteAshok Reddy Soma
Endianness detection is checked against uninitialized ret variable. Assign ret with read value from status register to fix this. Fixes: 31a359f87eaa ("serial: uartlite: Add support to work with any endianness") Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04common: usb_storage: Fix code indentationMichal Simek
Reported by smatch like: common/usb_storage.c:430 us_one_transfer() warn: inconsistent indenting Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-01-04cmd: load: Fix code indentationMichal Simek
Reported by smatch like: cmd/load.c:228 read_record() warn: inconsistent indenting Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-04tools: zynqmp: Fix regex expression around XPm_ConfigObjectAdrian Fiergolski
The XPm_ConfigObject array definition generated by Vitis 2020.1 differs from previous Vivado versions (before 2019.2). -const u32 XPm_ConfigObject[] __attribute__((used, section(".sys_cfg_data"))) = { +const u32 XPm_ConfigObject[] __attribute__((used, section(".sys_cfg_data"))) = +#elif defined (__ICCARM__) +#pragma location = ".sys_cfg_data" +__root const u32 XPm_ConfigObject[] = +#endif +{ Change the matching regex to handle both cases. Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-12-29Merge tag 'efi-2021-01-rc5-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc5 (2) The following errors in the UEFI sub-system are fixed: * use after free in efi_exit() * invalid free when using the boot manager * pressing escape key once not recognized
2020-12-29efi_loader: use after free in efi_exit()Heinrich Schuchardt
Do not use data from the loaded image object after deleting it. Fixes: 126a43f15b36 ("efi_loader: unload applications upon Exit()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-29efi_loader: describe struct efi_loaded_image_objHeinrich Schuchardt
Add the missing description of some fields of struct efi_loaded_image_obj. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-29efi_loader: efi_signal_event() fix comment typosHeinrich Schuchardt
Add missing commas. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-29efi_loader: avoid invalid freeHeinrich Schuchardt
load_options passed from do_efibootmgr() to do_bootefi_exec() may contain invalid data from the stack which will lead to an invalid free(). Fixes: 0ad64007feb9 ("efi_loader: set load options in boot manager") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-29efi_loader: escape key handlingHeinrich Schuchardt
Up to now the escape key was not correctly detected in UEFI applications. We had to hit it twice for a single escape to be recognized. Use a 10 ms delay to detect if we are dealing with the escape key or an escape sequence. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-29efi_loader: missing parentheses after ifHeinrich Schuchardt
IS_ENABLED() contains parentheses. But we should still put extra parentheses around it in an if statement for readability. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-28Merge tag 'u-boot-imx-20201227' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2021.1 ---------------- CI: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/5680 - fixes for Variscite dart6ul - imx8mp : increase malloc area - fixes for bx50v3 - imx8m: HS400ES and UHS for EVK - imx8qm-rom7720: fix phy bind
2020-12-28Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Fix "Assert PERST# signal when unloading driver" in a37xx PCI driver (Pali) - Fix SPL on armada-xp-gp (add u-boot,dm-pre-reloc and alias) (myself)
2020-12-28Revert "arm64: a37xx: pci: Assert PERST# signal when unloading driver"Pali Rohár
This reverts commit 828d32621686aec593076d16445d39b9b8d49c05. This change revers code which asserting PERST# signal when unloading driver. Driver's remove callback is still there as it is used for other functionality. Asserting PERST# signal prior booting kernel is causing that A3720 boards (Turris MOX and Espressobin) with stable Linux kernel versions 4.14 and 4.19 are not able to detect some PCIe cards (e.g. Compex WLE200 and WLE900) and anymore. When PERST# signal is not asserted these cards are detected correctly. As this is regression for existing stable Linux kernel versions revert this problematic change in U-Boot. To make cards working with OpenWRT 4.14 kernel it is needed to disable link training prior booting kernel, which is already done in driver's remove callback. Described issue is in Linux kernel pci aardvark driver which is (hopefully) fixed in latest upstream versions. Latest upstream versions should be able to initialize PCIe bus and detects cards independently of the link training and PERST# signal state. So with this change, U-Boot on A3720 boards should be able to boot OpenWRT 4.14 kernel, stable 4.14 and 4.19 kernels and also latest mainline kernels. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-28arm: mvebu: armada-xp-gp.dts: Add spi0 aliasStefan Roese
For correct spi bus detection the spi0 alias is needed in the DT. Otherwise this error will ocurr in U-Boot: Invalid bus 0 (err=-19) Failed to initialize SPI flash at 0:0 (error -19) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Dennis Gilmore <dgilmore@redhat.com> Tested-by: Dennis Gilmore <dgilmore@redhat.com>
2020-12-28arm: mvebu: Add armada-xp-gp-u-boot.dtsi for U-Boot propertiesStefan Roese
Add some missing "u-boot,dm-pre-reloc;" properties to UART0, SPI controller and SPI NOR flash node to enable usage in SPL. Otherwise these devices will not be available. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Dennis Gilmore <dgilmore@redhat.com> Tested-by: Dennis Gilmore <dgilmore@redhat.com>
2020-12-26i2c: mxc_i2c: improve error message readabilityMarc Ferland
Use 0x%2lx to print the i2c bus base address in hexadecimal format instead of printing as an integer. Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-12-26imx: mx7: clock: use correct format stringsHeinrich Schuchardt
Use %u and not %d for unsigned values. Print kHz and not khz. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-26arm: dart6ul: read and print SoM info from eeprom on startupMarc Ferland
The dart6ul has an i2c eeprom at 0x50 which contains, among other things, the manufacturing/revision/options info of the SoM. This patch replaces the current checkboard() implementation with a more exhaustive one based on the content of the eeprom. Since this code uses the new driver model, some changes were also required in the DTS to make the nodes related to i2c available before relocation. This code was inspired from the supported u-boot code from Variscite which can be found here: https://github.com/varigit/uboot-imx/tree/imx_v2018.03_4.14.78_1.0.0_ga_var02 New output example: Board: PN: VSM-6UL-705B, Assy: AS1812142257, Date: 2019 Feb 17 Storage: eMMC, Wifi: yes, DDR: 1024 MiB, Rev: 2.4G Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-12-26arm: dart6ul: change compatible string for eepromMarc Ferland
The eeprom at address 0x50 is a BR24G04NUX-3TTR. It has a 4Kbit (512x8) capacity, change the compatible string to reflect this fact. Also, add an alias to easily refer to this eeprom with fdt_path_offset() which will be in another commit. Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-12-26toradex: hand over maintainershipIgor Opaniuk
Hand over maintainership of Toradex SoMs (that I was responsible of) to Oleksandr because of my resignation from Toradex, as such I will have no immediate involvement with these modules and as a result not able to continue maintaining these boards. CC: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-26imx8mp_evk: Increase CONFIG_SYS_MALLOC_F_LENFabio Estevam
When booting imx8mp-evk the following allocation error message is seen: U-Boot 2021.01-rc3-00200-ge668bec96a5f (Dec 21 2020 - 14:36:42 -0300) alloc space exhausted Fix it by increasing CONFIG_SYS_MALLOC_F_LEN to 0x10000 like it is done on other i.MX8MM/8MN boards. Reported-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-26imx: ahab: allow to bypass confirmation for ahab_close cmdClément Péron
Calling ahab_close cmd force the user to interact for confirmation. This is not user-friendly when using this cmd during factory process. Allow the user to pass '-y' option to bypass this confirmation. Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-12-26board: ge: bx50v3: cleanup phy configSebastian Reichel
The current PHY rework does the following things: 1. Configure 125MHz clock 2. Setup the TX clock delay (RX is enabled by default), 3. Setup reserved bits to avoid voltage peak The clock delays are nowadays already configured by the PHY driver (in ar803x_delay_config). The code for that can simply be dropped. The clock speed can also be configured by the PHY driver by adding the device tree property "qca,clk-out-frequency". What is left is setting up the undocumented reserved bits to avoid the voltage peak problem. I slightly improved its documentation while updating the board's PHY rework code. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-26board: ge: bx50v3: remove confidx magic numbersSebastian Reichel
Instead of hardcoding index magic numbers in the board code, also rely on board_fit_config_name_match choosing the right config for the fitImage containing the kernel. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-26Merge tag 'efi-2021-01-rc5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc5 * In the Standalone MM based implementation of UEFI variables check the internal OP-TEE return code
2020-12-26efi_loader: Extra checks while opening an OPTEE sessionIlias Apalodimas
When opening an OP-TEE session we need to check the internal return value of OP-TEE call arguments as well the return code of the function itself. The code was also ignoring to close the OP-TEE session in case the shared memory registration failed. Fixes: f042e47e8fb43 ("efi_loader: Implement EFI variable handling via OP-TEE") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-26compiler.h: add host_build()Sebastian Reichel
Add a host_build() function, so that it's possible to check for software being build with USE_HOSTCC without relying on preprocessor conditions. In other words #ifdef USE_HOSTCC host_only_code(); #endif can be written like this instead: if (host_build()) host_only_code(); This improves code readability and test coverage and compiler will eleminate this unreachable code. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-26mx6sabresd: Remove unneeded checkboard()Fabio Estevam
After the conversion to device tree the board information becomes redundant: Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board Board: MX6-SabreSD Remove the printing of the board information. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-12-26configs: imx8m: enable eMMC HS400ES and SD UHS mode on EVKAndrey Zhizhikin
i.MX8M series includes support for high speed modes in uSDHC controllers. Turn on corresponding configuration options for EVK boards, which would enable high speed modes to be included in U-Boot. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2020-12-26ARM: dts: imx8m: add UHS or HS400/HS400ES propertiesAndrey Zhizhikin
i.MX8M series provide support for high speed grades in their usdhc controllers, which has eMMC and SDHC connected to them. Enable this support across the entire i.MX8M family by providing quirks to usdhc controllers designated by storage media connected to them. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com>
2020-12-26ARM: dts: imx8m: increase off-on delay on the SD Vcc regulatorAndrey Zhizhikin
Some SD Card controller and power circuitry has increased capacitance, which keeps the internal logic remains powered after regulator is switch off. This is generally the case when card is switched to SD104 mode, where a power cycle should be performed. In case if the card internal logic remains powered, it causes a subsequent failure of mode transition, effectively leading to failed enumeration. Introduce a delay of 20 msec in order to provide a possibility for internal card circuitry to drain voltages and perform a power cycle correctly. Similar fix is done in commit c49d0ac38a76 ("ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator") targeted Renesas SOCs. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Stefano Babic <sbabic@denx.de>
2020-12-26imx8mm_beacon: Enable HS400 on MMC controllerAdam Ford
The i.MX8MM is capable of HS400. Enable it in both U-Boot and SPL for faster throughput. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-12-26arm64: dts: imx8mm-beacon: Re-sync dts file with Linux 5.10-rc6Adam Ford
There have been some updates to the device trees, so re-sync. Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-12-26arm: dts: imx8mm: sync dts from Linux Kernel 5.10-rc6Adam Ford
There have been some updates to the device tree since 5.6. This also includes some clocks, and makes it easier to keep board device tree files in sync with Linux Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-12-26imx: imx8mm: Update clock bindings headerAdam Ford
Import clock bindings header file from Linux 5.10-rc6 Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-12-26ARM: dts: imx: imx8qm-rom7720: Fix AR8031 phy-modeOliver Graute
Fixed wrong PHY Interface Mode As per kernel commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode) the correct phy-mode should be "rgmii-id", so fix it accordingly to fix the Ethernet regression. This problem has been exposed by commit: commit 13114f38e2ccea9386726d8b9831dfc310589548 Fix the phy-mode accordingly to fix the regression. Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
2020-12-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Update Intel Edison doc information about xFSTK - Move and rename fsp_types.h file to signatures.h
2020-12-22fsp: Move and rename fsp_types.h fileSughosh Ganu
The fsp_types.h header file contains macros for building signatures of different widths. These signature macros are architecture agnostic, and can be used in all places which use signatures in a data structure. Move and rename the fsp_types.h under the common include header. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-12-22doc: edison: Update information about xFSTKAndy Shevchenko
xFSTK sources got a new home under Edison Firmware Group on GitHub [1]. Update Intel Edison documentation accordingly. While here, fix couple of typos. [1]: https://github.com/edison-fw Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2020-12-21Prepare v2021.01-rc4v2021.01-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-05 23:34:58 +0000