summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-11-16nand: Don't dereference NULL manufacturer_descSean Anderson
When no manufacturer is matched, manufacturer_desc is NULL. Avoid dereferencing it in that case. Fixes: 4e67c571252 ("mtd,ubi,ubifs: sync with linux v3.15") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2023-11-16spl: nand: Fix NULL-pointer dereferenceSean Anderson
spl_nand_fit_read unconditionally accesses load->priv. Ensure it is set. Fixes: 00e180cc513 ("spl: nand: support loading i.MX container format file") Signed-off-by: Sean Anderson <seanga2@gmail.com>
2023-11-04Merge branch '2023-11-03-assorted-tegra-improvements'Tom Rini
- Assorted improvements for Tegra platforms
2023-11-03sysreset: implement PALMAS sysreset functionsSvyatoslav Ryhel
PALMAS PMIC family has embedded poweroff function used by some device to initiane device power off. Implement it as sysreset driver. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03sysreset: implement TPS65910 sysreset functionsSvyatoslav Ryhel
TPS65910/TPS65911 PMICs have embedded power control functions used by some device to initiane device power off. Implement it as sysreset driver. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03sysreset: implement TPS80031 sysreset functionsSvyatoslav Ryhel
TPS80031/TPS80032 PMICs have embedded power control functions used by some device to initiane device power off. Implement it as sysreset driver. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03sysreset: implement MAX77663 sysreset functionsSvyatoslav Ryhel
MAX77663 PMIC has embedded poweroff function used by some device to initiane device power off. Implement it as sysreset driver. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03arm: mach-tegra: enable sysreset driverSvyatoslav Ryhel
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03sysreset: tegra: create arch specific sysreset driverSvyatoslav Ryhel
Tegra uses built in Power Management Controller (PMC) to perform CPU reset. Code to perform this was located in mach-tegra, so lest create DM driver to handle this. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03power: regulator: tps65911: add regulator supportSvyatoslav Ryhel
The driver provides regulator set/get voltage enable/disable functions for TI TPS5911 PMIC. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-11-03power: pmic: tps65910: add TPS65911 PMIC supportSvyatoslav Ryhel
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-11-03power: regulator: tps80031: add regulator supportSvyatoslav Ryhel
The driver provides regulator set/get voltage enable/disable functions for TI TPS80031/TPS80032 PMICs. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-11-03power: pmic: add the base TPS80031 PMIC supportSvyatoslav Ryhel
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-11-03power: regulator: max77663: add regulator supportSvyatoslav Ryhel
The driver provides regulator set/get voltage enable/disable functions for MAXIM MAX77663 PMICs. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-11-03power: pmic: add the base MAX77663 PMIC supportSvyatoslav Ryhel
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-11-03power: regulator: palmas: fix ldoln and ldousb detectionSvyatoslav Ryhel
dev->driver_data will carry the tail of ldo if there is a number and if there is no number it will be an error code, anyway it will not be zero. This results in a wrong ldo regulator detection. To avoid this check for non-numerical ldo first and then manipulate dev->driver_data. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03power: pmic: palmas: support TI TPS65913 PMICSvyatoslav Ryhel
Existing PALMAS PMIC driver is fully compatible with TI TPS65913 PMIC found in many Tegra 4 devices, like Tegra Note 7 and ASUS TF701T. TPS65913 shares same structure of regulators like TPS659038 so data can be reused. Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # NVIDIA Tegratab Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-11-03board: asus: lg: move config fragments into device boardsSvyatoslav Ryhel
Move ASUS Transformers, Grouper, P895 and P880 config fragments into their respective device directory in /board/../configs/ Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03board: tegra30: remove nvidia_board_late_init callsSvyatoslav Ryhel
Remove nvidia_board_late_init calls from board since this setup is performed in board2 of mach-tegra. Call of nvidia_board_late_init from within the board does not provide any additional data. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS Transformer T30 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: tegra: board2: add generic late initSvyatoslav Ryhel
Board specific late init allows vendors to set up different device or board specific env variables (like serial number, platform name). In case this information is missing, u-boot will lack info regards serial or platform. To avoid this prior nvidia_board_late_init internal generic function is called which fills required data. In this case platform name is obtained from get_chip and serialno is filled with SoC id. Though SoC id is not dedicated to be devices serial but it fits well in case of restriction of data about device and since SoC is basically a main chip of the device. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS Transformers Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Nvidia Tegratab Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-11-03ARM: tegra20: tegra30: support EBTUPDATE on non-encrypted devicesSvyatoslav Ryhel
Re-crypt support was extended to devices without burnt SBK. In case SBK is not set, place from where it is read is filled with zeroes. This patch adds support for ebtupdate function to detect nosbk device and avoid crypto operations for it. Tested-by: Maksim Kurnosenko <asusx2@mail.ru> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: tegra114: enable base voltages setup from boardSvyatoslav Ryhel
Tegra 4, same as Tegra 3, requires configuration of CPU and CORE voltages in the SPL stage to boot properly. Expose function to be able perform this configuration in the SPL section of the device board. Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF701T Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03configs: grouper: drop I2C_MUXSvyatoslav Ryhel
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: dts: grouper: complete missing bindingsSvyatoslav Ryhel
Clean up the tree and prepare for DM PMIC migration. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: dts: lg-x3: complete missing bindingsSvyatoslav Ryhel
Clean up the tree and prepare for DM PMIC migration. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: dts: endeavoru: complete missing bindingsSvyatoslav Ryhel
Clean up the tree and prepare for DM PMIC migration. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: dts: transformer-t30: complete missing bindingsSvyatoslav Ryhel
Clean up the tree and prepare for DM PMIC migration. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03configs: transformer_t30: convert bootmenu optionSvyatoslav Ryhel
Convert refresh USB to enter console. Transformers have full size USB and a dock keyboard so access to U-Boot console would be handy. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03board: asus: transformer-t30: remove PMIC GPIOs configurationSvyatoslav Ryhel
Default configuration matches values which are set in the board so this configuration is not required. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: dts: tf201: configure dock USB phySvyatoslav Ryhel
TF201 unlike other transformers uses non-fused xcvr value for its dock USB port. With out it dock USB and SD reader will not work. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03configs: transformer_t30: support booting from USBSvyatoslav Ryhel
Change boot logic to primary try to boot from USB in dock, then from microSD and lastly from eMMC. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: dts: tf600t: separate from common transformers treeSvyatoslav Ryhel
TF600T has significant differences (Tegra DSI and DSI panel, own power supply system) which makes use of common transformer device tree complicated. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: dts: p1801-t: separate from common transformers treeSvyatoslav Ryhel
P1801-T has significant differences (hdmi panel and backlight, own power supply system) which makes use of common transformer device tree complicated. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03mmc: tegra: get default-tap and default-trim from device treeSvyatoslav Ryhel
Default-tap and default-trim values are used for eMMC setup mostly on T114+ devices. As for now, those values are hardcoded for T210 and ignored for all other Tegra generations. Fix this by passing tap and trim values from dts. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03ARM: tegra210: set default-tap and default-trim values in sdhci nodesSvyatoslav Ryhel
Tegra MMC driver has hardcoded tap and trim values as for now. Set default-tap and default-trim values in sdhci nodes to avoid regressions in case Tegra MMC driver is upated to use dts values. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-11-03Merge tag 'qcom-pull-20231103' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-snapdragon As discussed, here is the maintainers update for Snapdragon. Sumit Garg who maintains a few of the Qualcomm platforms in U-boot has also been added as a reviewer.
2023-11-03Merge tag 'u-boot-dfu-20231103' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dfu u-boot-dfu-20231103 - Fix CRC chunk size in fastboot - Make size optional for dfu on mmc
2023-11-03MAINTAINERS: update Qualcomm maintainerCaleb Connolly
As Ramon has been inactive for some time now, add myself and Neil Armstrong to maintain Qualcomm efforts going forwards. Add Sumit Garg who maintains several Qualcomm platforms as reviewer. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-11-02Merge tag 'dm-pull-2nov23' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini
Just various bugfixes, apart from the TI one
2023-11-02u_boot_pylib: Ensure subprocess is closed downSimon Glass
It isn't clear why we need to have two different paths for closing down the pipe. Unify them and use the Python to avoid this warning: subprocess.py:1127: ResourceWarning: subprocess 83531 is still running Note that this code appears to originally have come from [1] and was committed into the ChromeOS chromiumos/platform/crosutils repo in the bin/cros_image_to_target.py file. The addition of the extra code path came later, so that is chosen for the fixes tag. [1] https://codereview.chromium.org/3391008 Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: a10fd93cbc patman: Make command methods return a CommandResult
2023-11-02buildman: Support upstream branch name containing /Simon Glass
Buildman assumes that branch names do not have a slash in them, since slash is used to delimit remotes, etc. This means that a branch called 'WIP/tryme' in remote dm ends up being 'tryme'. Adjust the logic a little, to try to accommodate this. For now, no tests are added for this behaviour. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-11-02sandbox: eliminate unused functions from binariesHeinrich Schuchardt
The sandbox should closely mimic other architectures. Place each function or data in a separate section and let the linker eliminate unused ones. This will reduce the binary size. In the linker script mark that u_boot_sandbox_getopt are to be kept. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-11-02binman: openssl: x509: ti_secure_rom: Add support for bootcore_optsNeha Malcom Francis
According to the TRMs of K3 platform of devices, the ROM boot image format specifies a "Core Options Field" that provides the capability to set the boot core in lockstep when set to 0 or to split mode when set to 2. Add support for providing the same from the binman DTS. Also modify existing test case for ensuring future coverage. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-11-02buildman: Include symbols in the read-only data sectionSimon Glass
When symbols switch between the inited data section and the read-only data section their visbility changes, at present, with the -B option. This is confusing, since adding 'const' to a variable declaration can make it look like a significant improvement in bloat. But in fact nothing has changed. Add 'r' to the list of symbols types that are recorded, to correct this problem. Add a constant to make it easier to find this code next time. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-11-02cros_ec: spi: disable annoying key echo on consoleMilan P. Stanić
on Peach-pi console every key press is echoed with message 'cros_ec_command: Returned status 1' this is not proper fix, just hack to disable this message Signed-off-by: Milan P. Stanić <mps@arvanta.net> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-11-02binman: Move stage header into a CBFS attributeSimon Glass
cbfsutil completely changed the way that stages are formatted in CBFS. Adjust the binman implementation to do the same. This mirrors commit 81dc20e744 in coreboot. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-11-02binman: Rename TYPE_STAGE to TYPE_LEGACY_STAGESimon Glass
In preparation for changing how stages are stored, rename the existing stage tag. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-11-02binman: Replace FILENAME_ALIGN 16 with ATTRIBUTE_ALIGN 4Simon Glass
cbfsutil changed to 4-byte alignment for filenames instead of 16. Adjust the binman implementation to do the same. This mirrors commit 5779ca718c in coreboot. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-11-02binman: Ensure attributes always come last in the metadataSimon Glass
cbfsutil changed to write zero bytes instead of 0xff when a small padding must be added. Adjust the binman implementation to do the same. Drop the code which looks for an unused attribute tag, since it is not used. A future patch moves the attributes to the end of the header in any case, so no data will follow the attributes. This mirrors commit f0cc7adb2f in coreboot. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-11-02binman: Don't add compression attribute for uncompressed filesSimon Glass
cbfsutil changed to skip adding a compression attribute if there is no compression. Adjust the binman implementation to do the same. This mirrors commit 105cdf5625 in coreboot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 21:02:12 +0000