summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-24virtio: fix off by one device id comparisonVincent Stehlé
VIRTIO_ID_MAX_NUM is the largest device ID plus 1. Therefore a device id cannot be greater or equal to VIRTIO_ID_MAX_NUM. Fix the comparison accordingly. Fixes: 8fb49b4c7a82 ("dm: Add a new uclass driver for VirtIO transport devices") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2021-02-24build/DTC: fix sed usage in DTC commandRoger Pau Monne
Current sed usage in the DTC command relies on GNU sed specific -i option which has a slightly different syntax for BSD sed and always expects an extension to be provided in order to create a backup file. Instead drop the cat concatenation done before the sed call and use sed itself to edit and concatenate the files. No functional change intended. Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>
2021-02-24scripts/check-config.sh: fix to be compatible with BSD sedRoger Pau Monne
Fist use extended regexp in order to drop the '\' around the parentheses which is not supported by BSD sed in regular mode. Secondly use [[:blank:]] instead of \s, as the later is a GNU extension. No functional change intended. Signed-off-by: Roger Pau Monné <royger@FreeBSD.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-24malloc: adjust memcpy() and memset() definitions.Heinrich Schuchardt
Compiling the sandbox fails on armv7 due to conflicting definitions of memcpy() and memset() in include/malloc.h and include/linux/string.h. Use linux/string.h here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-24config: hikey: convert to DM_USB and DM_ETHPeter Robinson
Convert the hikey to use DM_USB and DM_ETH. Conversion based on rpi as it has a similar DWC config. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2021-02-24cmd: pinmux: depend on PINCTRLMarek Behún
The pinmux command uses functions pinctrl_get_pin_*(), which are missing if PINCTRL config option is disabled. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-24Makefile: Add (default) DEVICE_TREE to SPL FITKlaus Heinrich Kiwi
U-boot allows the default device tree to be overridden from the build environment using the DEVICE_TREE variable. Make sure that we include it in the SPL FIT mkimage build step. This also fixes a broken image in case CONFIG_OF_LIST and CONFIG_OF_OVERLAY_LIST are unset (i.e., expected to be supplied by the DEVICE_TREE env var). Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
2021-02-24Kconfig: SPL_FIT_SIGNATURE requires SPL_LOAD_FITKlaus Heinrich Kiwi
Having the ability to support firmware FIT signatures on the SPL sounds not so useful if the SPL is not supporting to load a (U-boot) firmware as a FIT image. Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
2021-02-24Kconfig: SPL_FIT_SIGNATURE selects FIT_SIGNATUREKlaus Heinrich Kiwi
Selecting SPL_FIT_SIGNATURE (without selecting U-boot proper verified boot first) breaks the build due to CONFIG_FIT_SIGNATURE_MAX_SIZE being undefined, in addition to Kconfig warnings on RSA and IMAGE_SIGN_INFO unmet dependencies. Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
2021-02-24fs: btrfs: change directory list output to be aligned as beforeMarek Behún
Since commit 325dd1f642dd ("fs: btrfs: Use btrfs_iter_dir() to ...") when btrfs is listing a directory, the output is not aligned: <SYMLINK> 15 Wed Sep 09 13:20:03 2020 boot.scr -> @/boot/boot.scr <DIR> 0 Tue Feb 02 12:42:09 2021 @ <FILE> 108 Tue Feb 02 12:54:04 2021 1.info Return back to how it was displayed previously, i.e.: <SYM> 15 Wed Sep 09 13:20:03 2020 boot.scr -> @/boot/boot.scr <DIR> 0 Tue Feb 02 12:42:09 2021 @ < > 108 Tue Feb 02 12:54:04 2021 1.info Instead of '<FILE>', print '< >', as ext4 driver. If an unknown directory item type is encountered, we will print the type number left padded with spaces, enclosed by '?', instead of '<' and '>', i.e.: ? 30? ............................. name Signed-off-by: Marek Behún <marek.behun@nic.cz> Fixes: 325dd1f642dd ("fs: btrfs: Use btrfs_iter_dir() to replace ...") Cc: David Sterba <dsterba@suse.com> Cc: Qu Wenruo <wqu@suse.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Qu Wenruo <wqu@suse.com>
2021-02-24fs: btrfs: skip xattrs in directory listingMarek Behún
Skip xattrs in directory listing. U-Boot filesystem drivers do not list xattrs. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: David Sterba <dsterba@suse.com> Cc: Qu Wenruo <wqu@suse.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Qu Wenruo <wqu@suse.com>
2021-02-24cmd: fdt: skip board specific fixup using env variableWasim Khan
Sometimes it is useful to boot OS with already fixed-up device tree. Check for env variable 'skip_board_fixup' before calling ft_board_setup(). Current behaviour is unchanged, additionally user can set skip_board_fixup to 1 to skip the fixup. Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
2021-02-24fs/squashfs: NULL dereference in sqfs_closedir()Heinrich Schuchardt
sqfs_opendir() called in sqfs_size(), sqfs_read(), sqfs_exists() may fail leading to sqfs_closedir(NULL) being called. Do not dereference NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-24cmd: pwm: Rework argc sanity checkingTom Rini
Currently, we check argc in a number of places to make sure that we have all of the required arguments for each of the pwm sub-commands. However, there's at least one place where we've got dead code as we'll never have argc == 0, due to checking that argc was at least 4 earlier and having only subtracted 3. Rework things so that when we have determined our subcommand make sure we have the right number of arguments for it, or error out. This means we can stop checking against argc again later. Reported-by: Coverity (CID: 316601) Cc: Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-23Merge tag 'xilinx-for-v2021.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.04-rc3 qspi: - Support for dual/quad mode - Fix speed handling clk: - Add clock enable function for zynq/zynqmp/versal gem: - Enable clock for Versal - Fix error path - Fix mdio deregistration path fpga: - Fix buffer alignment for ZynqMP xilinx: - Fix reset reason clearing in ZynqMP - Show silicon version in SPL for Zynq/ZynqMP - Fix DTB selection for ZynqMP - Rename zc1275 to zcu1275 to match DT name
2021-02-23spi: zynqmp_gqspi: fix set_speed bug on multiple runsBrandon Maier
If zynqmp_qspi_set_speed() is called multiple times with the same speed, then on the second call it will skip recalculating the baud_rate_val as it assumes the speed is already configured correctly. But it will still write the baud_rate_val to the configuration register and call zynqmp_gqspi_set_tapdelay(). Because it skipped recalculating the baud_rate_val, it will use the initial value of 0 . This causes the driver to run at maximum speed which for many spi flashes is too fast and causes data corruption. Instead only write out a new baud_rate_val if we have calculated the correct baud_rate_val. This opens up another issue with the "if (speed == 0)", we don't save off the new plat->speed_hz value when setting the baud rate on the speed=0 path. Instead mimic what the Linux zynqmp gqspi driver does, and have speed==0 just use the same calculation as a normal speed. That will cause the baud_rate_val to use the slowest speed possible, which is the safest option. Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com> CC: jagan@amarulasolutions.com CC: michal.simek@xilinx.com CC: Ashok Reddy Soma <ashokred@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23arm64: zynqmp: Rename zc1275/zcu1275 to be aligned with DT nameMichal Simek
Folder names corresponds to DT name. These boards have been renamed from zc1275 to zcu1275 by commit shown below and this should be the part of that commit. Fixes: 420d44678119 ("arm64: zynqmp: Rename zc1275 to zcu1275") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23net: gem: Fix error path in zynq_gem_probeMichal Simek
Clean up error path in connection where priv->rxbuffers and priv->tx_bd are allocated. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23net: gem: Enable ethernet rx clock for versalT Karthik Reddy
Enable rx clock along with tx clock for versal platform. Use compatible data to enable/disable clocks in the driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-02-23i2c: i2c_cdns: Enable i2c clockT Karthik Reddy
Enable i2c controller clock from driver probe function by calling clk_enable(). Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-02-23clk: versal: Add support to enable clocksT Karthik Reddy
Add clock enable functionality in versal clock driver to enable clocks from peripheral drivers using clk_ops. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23clk: zynqmp: Add support to enable clocksT Karthik Reddy
Add clock enable functionality in zynqmp clock driver to enable clocks from peripheral drivers using clk_ops. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23clk: zynq: Add dummy clock enable functionMichal Simek
A lot of Xilinx drivers are checking -ENOSYS which means that clock driver doesn't have enable function. Remove this checking from drivers and create dummy enable function as was done for clk_fixed_rate driver by commit 6bf6d81c1112 ("clk: fixed_rate: add dummy enable() function"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23arm64: zynqmp: Do not clear reset reasonMichal Simek
There is no need to clear reset reason register because it is protected by PMUFW already which is reported when verbose log is enabled as: pm_core.c@733 APU> No write permission to 0xFF5E0220 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-23fpga: zynqpl: fix buffer alignmentMichael Walle
Due to pointer arithmetic, "sizeof(u32) * ARCH_DMA_MINALIGN" is subtracted. It seems that the original intention was to just subtract ARCH_DMA_MINALIGN. Fix it. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-22Merge tag 'u-boot-amlogic-20210222' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - adds adc-keys button driver - fix meson-saradc driver to get reference voltage - add adc-keys test for sandbox - enable adc-keys for VIM3 & VIM3L boards - fix button.h build
2021-02-22Merge tag 'ti-v2021.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix ethernet on J721e - Sync am335x DT nodes from Linux 5.9-rc7 - Minor Clock fixes
2021-02-22Merge tag 'video-for-v2021.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - splash_source warning fix when building with 64-bit toolchains - lq123p1jx31 and nv101wxmn51 compatible in simple panel driver - remove not used mb862xx driver - add Himax HX8238D panel driver - s/video_uc_platdata/video_uc_plat/
2021-02-22Merge branch '2021-02-21-mpc83xx-updates'Tom Rini
- mpc8379erdb DM_MMC conversion - kmeter1 updates - qe_uec fixes
2021-02-22button: add udevice forward declarationNeil Armstrong
After 401d1c4f5d2d ("common: Drop asm/global_data.h from common header") build fails with : drivers/button/button-uclass.c:13:5: error: conflicting types for 'button_get_by_label' int button_get_by_label(const char *label, struct udevice **devp) ^~~~~~~~~~~~~~~~~~~ Adding struct udevice forward declaration in button.h solves the build error. Fixes: 401d1c4f5d2d ("common: Drop asm/global_data.h from common header") Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-22arch: sandbox: fix typo in clk.hDario Binacchi
Fix the 'devivce' typo in arch/sandbox/include/asm/clk.h. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-22clk: remove a redundant headerDario Binacchi
The linux/err.h header file was included twice. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-22arm: dts: sync am33xx-clocks with Linux 5.9-rc7Dario Binacchi
The commit 6337d53fdf45 ("arm: dts: sync am33xx with Linux 5.9-rc7") synchronized the am33xx-clocks.dtsi file with Linux 5.9-rc7 with the exception of two nodes. I think I was wrong and it is better to keep the two files similar and possibly make changes to the *-u-boot.dtsi files. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-02-22clk: ti: improve debug messages for clkctrl driverDario Binacchi
The previous version printed the same debug message for both the enable and disable routines without highlighting whether you were enabling or disabling the module. It is now clear whether you are enabling or disabling the module. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-02-21uec.h: fix COFIG_DM typoRasmus Villemoes
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-02-21dm_qe_uec.c: fix indentation in uec_set_mac_if_mode()Rasmus Villemoes
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-02-21mdio-uclass.c: support fixed-link subnodesRasmus Villemoes
When trying to port our mpc8309-based board to DM_ETH, on top of Heiko's patches, I found that nothing in mdio-uclass.c seems to support the use of a fixed-link subnode of the ethernet DT node. That is, the ethernet node looks like enet0: ethernet@2000 { device_type = "network"; compatible = "ucc_geth"; ... fixed-link { reg = <0xffffffff>; speed = <100>; full-duplex; }; but the current code expects there to be phy-handle property. Adding that, i.e. phy-handle = <&enet0phy>; enet0phy: fixed-link { just makes the code break a few lines later since a fixed-link node doesn't have a reg property. Ignoring the dtc complaint and adding a dummy reg property, we of course hit "can't find MDIO bus for node ethernet@2000" since indeed, the parent node of the phy node does not represent an MDIO bus. So that's obviously the wrong path. Now, in linux, it seems that the fixed link case is treated specially; in the of_phy_get_and_connect() which roughly corresponds to dm_eth_connect_phy_handle() we have if (of_phy_is_fixed_link(np)) { ret = of_phy_register_fixed_link(np); ... } else { phy_np = of_parse_phandle(np, "phy-handle", 0); ... } phy = of_phy_connect(dev, phy_np, hndlr, 0, iface); And U-Boot's phy_connect() does have support for fixed-link subnodes. Calling phy_connect() directly with NULL bus and a dummy address does seem to make the ethernet work. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-02-21mpc83xx: kmeter1: increase malloc_f spaceHeiko Schocher
make malloc space before relocation bigger, set CONFIG_SYS_MALLOC_F_LEN=0x800 Signed-off-by: Heiko Schocher <hs@denx.de>
2021-02-21mpc83xx: kmeter1_defconfig add missing BAT4 configHeiko Schocher
BAT4 setup missed in defconfig, add it. Signed-off-by: Heiko Schocher <hs@denx.de>
2021-02-21mpc8379erdb: Convert to DM_MMCSinan Akman
Signed-off-by: Sinan Akman <sinan@writeme.com>
2021-02-21mpc8379erdb: Add device treeSinan Akman
Signed-off-by: Sinan Akman <sinan@writeme.com>
2021-02-21Merge tag 'efi-2021-04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-04-rc3 Bug fixes: * Let EFI simple file protocol access last block of partition * Correct conversion of multi-part device paths in EFI_DEVICE_PATH_TO_TEXT_PROTOCOL.ConvertDevicePathToText() Documentation: * booti and qfw man-pages
2021-02-21Merge tag 'for-v2021.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2cTom Rini
i2c changes for v2021.04 new feature: - Allow disabling driver model for I2C in SPL fixes: - i2c-gpio: Fix GPIO output - at91: fix crash when using 'i2c probe'
2021-02-21Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- RCar Gen3 updates
2021-02-21doc: qfw man-pageHeinrich Schuchardt
Provide a man-page for the qfw command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-21efi_loader: multi part device paths to textHeinrich Schuchardt
Our current implementation of EFI_DEVICE_PATH_TO_TEXT_PROTOCOL.ConvertDevicePathToText() truncates multi part device paths after the first part. We should convert all parts. Render device path instance ends as commas. This is not explicitly described in the UEFI spec but mimics what EDK II does. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-02-21efi_selftest: multi part device path to textHeinrich Schuchardt
Test EFI_DEVICE_PATH_TO_TEXT_PROTOCOL.ConvertDevicePathToText() for a multi part device path. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-02-21efi_selftest: compiler flags for dtbdump.oHeinrich Schuchardt
Fix a typo. Apply the correct compiler flags to dtbdump.o. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-21doc: booti man-pageHeinrich Schuchardt
Provide a man-page for the booti command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-21doc/README.distro: kernel_comp_addr_rHeinrich Schuchardt
Add missing articles and preposition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 21:20:33 +0000