| Age | Commit message (Collapse) | Author |
|---|
|
We use this function to clean up leftover resources when booting an
EFI HTTP boot image, but the name is unnecessary long.
Shorten it to efi_bootmgr_release_uridp()
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Daniel Schultz <d.schultz@phytec.de> says:
This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot
sources:
- Load U-Boot with USB DFU
- Load a Linux and initramfs from OSPI/QSPI NOR flash
- Load a Linux and rootfs from Network
Moreover, it adds required changes to the environment to boot an A/B
system with RAUC and includes some minor fixes.
|
|
Commit 371b379edbf3 ("configs: Make USB_GADGET_MANUFACTURER
consistent over all PHYTEC boards") made the USB_GADGET_MANUFACTURER
value consistent over all PHYTEC boards.
Update the phyCORE-AM62x defconfigs to make this config consistent
as well.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
The environment should have a size of 0x20000 instead 0x2000.
Update to have the same environment size for all PHYTEC K3 products.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
This config includes the phycore_am62x_r5_defconfig file as well as
the am62x_r5_usbdfu.config fragment. We need another defconfig
because the AM62x has not enough internal SRAM to support all boot
sources. The normal phycore_am62x_r5_defconfig should allow to boot
from MMC and OSPI while this new defconfig allows to boot from USB.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
Merge the am62x_a53_usbdfu.config into the phyCORE-AM62x A53 defconfig to
properly support USB DFU boot.
This config was made with the following command:
make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- \
phycore_am62x_a53_defconfig am62x_a53_usbdfu.config
However, CONFIG_USB_GADGET_MANUFACTURER was not merged to keep Phytec
as manufacturer.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
The phyCORE-AM64x board code sets an environment variable 'boot'
with the device U-Boot booted from. Use this variable in
CONFIG_BOOTCOMMAND to boot Linux from the same boot device by
default.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
The phyCORE-AM62x board code sets an environment variable 'boot'
with the device U-Boot booted from. Use this variable in
CONFIG_BOOTCOMMAND to boot Linux from the same boot device by
default.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
Include the boot logic to boot via Network or from a OSPI/QSPI
NOR flash. Moreover, set all required variables to both boot
methods to the environment.
Note: The phyBOARD-Electra AM64x is not able to load the U-Boot
via Network. However, it's still possible to load the kernel.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
Include the boot logic to boot via Network or from a OSPI/QSPI
NOR flash. Moreover, set all required variables to both boot
methods to the environment.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
This boot logic allows to boot a Kernel image, Device-Tree blob
and a initramfs from an external OSPI/QSPI NOR flash.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
This boot logic allows to boot a Kernel image, Device-Tree blob
and overlays via tftp/dhcp (configurable with 'net_fetch_cmd').
Additionally, it loads a rootfs via NFS.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
Initialize the environment for booting an RAUC image when
'doraucboot' is set to 1.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
Add a mmc prefix to 'loadimage' and 'loadfdt' because we need
similar variables for other boot sources. This will prevent
name clashes and allows to implement similar boot logic.
Also switch from loadaddr to kernel_addr_r.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
Enable CONFIG_OF_BOARD_SETUP to fixup kernel device tree with mtd
partitions.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
|
|
read could be a negative error value but size in spl_image is unsigned
so when they are compared read is used as if it's a unsigned value
and if it's negative it'll most likely be bigger than size and the
result will be true and _spl_load() will return 0 to the caller.
This results in the caller to _spl_load() not seeing that an error happened
as it should and continuing as if the load was completed when it might
not have been.
Check if read is negative and return it's value if it is before comparing
against size in spl_image.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
If erase/write/read size is 0 then it throws the mentioned error message
when debug message ie enabled as per 899fb5aa8bec ("cmd: sf/nand: Print
and return failure when 0 length is passed"), setting it to None as
debug message is not enabled by default for testing.
Signed-off-by: Love Kumar <love.kumar@amd.com>
|
|
The Kconfig symbols SYS_ARCH, SYS_CPU, SYS_SOC, SYS_VENDOR and
SYS_BOARD are defined in arch/Kconfig as having type string, and most
board files simply amend those definition with suitable
default "foo"
or
default "foo" if BAR
stanzas. But some also include a redundant repetition of the type.
Homogenize the code base by removing those lines.
Generated by
find arch/*/ board -name Kconfig | xargs perl -i -g -pe 's/(config SYS_(ARCH|CPU|SOC|VENDOR|BOARD)\n)\s*string\n/\1/gs'
with the trailing slash in arch/*/ ensuring that arch/Kconfig itself
is not found.
This does not change boards which add a prompt string, e.g.
string "Board name"
because I think those change the semantics of the symbol into being
user-settable.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
As per the maintainers at egnite GmbH, they are no longer interested in
supporting this board. Go and remove the platform here. Furthermore,
this is the only AT91SAM9XE platform in-tree so remove supporting code
for that as well.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
net_auto_load() cannot call tftp_start() if CONFIG_CMD_TFTPBOOT is
disabled.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
|
|
into next
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon into next
Various improvements to Snapdragon support:
* Bumped up the pagetable size to handle newer SoCs with much more RAM
* Made memory map parsing more robust, fixing chainloading on
SM8550/SM8650
* Populate fdt_addr_r with U-Boot's FDT by default, and set $loadaddr to
prevent
crashes with some commands which expect it
* Added initial support for SC7280/QCM6490 and the new RB3 Gen 2 board
* Add debug config fragments to enable debug UART on some SoCs.
* Enable RPMh regulators on SM8550/SM8650
* Map the cmd-db memory explicitly since it may not be in the memory map
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/22255
|
|
Implement trivial extension to the sandbox PHY, which makes it pretend
to support selecting USB Host mode and nothing else. Any other mode is
rejected with -EINVAL. Any submode except for default submode 0 is
rejected with -EOPNOTSUPP . The implementation behaves in this trivial
way to permit easy unit testing using test which is also added in this
commit.
To run the test, use e.g. sandbox64_defconfig and run U-Boot as follows:
$ ./u-boot -Tc 'ut dm phy_setup'
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The current init operation also sets the PHY into USB host mode.
Split the mode configuration into set_mode callback instead and
implement support for device and OTG modes as well.
The OTG mode performs auto-detection and selects either host or
device mode. In case the OTG mode is configured, submode field
can be used to select full PHY (re)initialization or only mode
auto-detection. The full (re)initialization is only necessary
once, on start up.
Since the OTG mode may enable IRQ generation in the PHY, disable
that IRQ generation in the exit callback again.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Extend generic_setup_phy() parameter list with PHY mode and submode and
call generic_phy_set_mode() in generic_setup_phy(), so the generic PHY
setup function can configure the PHY into correct mode before powering
the PHY up.
Update all call sites of generic_setup_phy() as well, all of which are
USB host related, except for DM test which now behaves as a USB host
test.
Note that if the PHY driver does not implement the .set_mode callback,
generic_phy_set_mode() call returns 0 and does not error out, so this
should not break any existing systems.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
The Python virtualenv tool sets up a few things in the environment,
putting its path first in the PATH environment variable and setting up
a sys.prefix different from the sys.base_prefix value.
At present buildman puts the toolchain path first in PATH so that it can
be found easily during the build. For sandbox this causes problems since
/usr/bin/gcc (for example) results in '/usr/bin' being prepended to the
PATH variable. As a result, the venv is partially disabled.
The result is that sandbox builds within a venv ignore the venv, e.g.
when looking for packages.
Correct this by detecting the venv and adding the toolchain path after
the venv path.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We already have some documentation describing how to enable debug UART
for Qualcomm SoCs. However the UART address varies per-soc... Add some
config fragments to enable debug UART for few well supported SoCs.
These can be used like:
$ make qcom_defconfig debug-sdm845.config
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The process here is almost identical to the Dragonboard 410c, we've come
full circle!
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Introduce a defconfig for the RB3 Gen 2 and other QCM6490 boards with a
dedicated uefi partition. These can replace EDK2 entirely with U-Boot.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Enable clocks on SC7280
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
This soc doesn't have the generic compatible.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Adjust DTS so USB runs in host mode. The type-c port is the only
supported port (since the others need PCIe). Booting from USB is
possible with a powered type-c dock.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
For running U-Boot as primary bootloader we must define the memory
layout statically.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
We don't actually need any clocks to get UFS up and running, resets are
useful though.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Add the PM8550 & related regulators found on the SM8550 and SM8650 platforms.
The tables are imported from the Linux driver.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The TCS writes has no effect after the removal of the __tcs_set_trigger()
call, obviously it seems the RSC version 3 requires it to complete the transactions.
Fixes: 80c5be164ad ("soc: qcom: rpmh-rsc: drop unused multi-threading and non-active TCS support")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # sm8250 rb5
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Some newer boards end up with a bunch of holes in the memory map due to
how Qualcomm's hypervisor and ABL work. The end result is 14+ memory
regions.
Bump CONFIG_NR_DRAM_BANKS to 24 so we can handle these and any future
expansion easily.
Yes, this is ridiculous, but there is no other way.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
On at least SM8650 this region might not be included in the memory map.
Use the new mmu_map_region() helper to map it during bind().
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
memcmp() can cause aborts on some platforms and generally seems to be
the wrong approach here. Use strncmp() instead which is more correct.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
In some cases we might want to map some memory region after enabling
caches. Introduce a new helper for this.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
This variable is used by default in some commands, set it to the same as
kernel_addr_r.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
Set the fdt_addr_r environment variable to a region of LMB allocated
memory, and populate it by default with a copy of U-Boots FDT. This will
be used for Linux if no other DT is provided.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
We don't know at build time where a sensible place for this is, allocate
it at runtime like the other variables.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
In the typical case where we chainload from ABL, the serial number is
available in the DT bootargs. Read it out and set the serial#
environment variable so that it can be used by fastboot.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
With 14+ entries in the memory map, we need quite a bit more space for
the page tables.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
The generic memory parsing code in U-Boot lacks a few things that we
need on Qualcomm:
1. It sets gd->ram_size and gd->ram_base to represent a single memory
block.
2. setup_dest_addr() later relocates U-Boot to ram_base + ram_size, the
end of that first memory block.
This results in all memory beyond U-Boot being unusable in Linux when
booting with EFI.
Since the ranges in the memory node may be out of order, the only way
for us to correctly determine the relocation address for U-Boot is to
parse all memory regions and find the highest valid address.
We can't use fdtdec_setup_memory_banksize() since it stores the result
in gd->bd which is not yet allocated.
Hence, this commit, which implements an optimised parser to read the
memory blocks and store them in the .data section where they will
survive relocation.
We set ram_base and ram_size to describe the entire address space of
memory, with the assumption that the last memory region is big enough
for U-Boot, its DTB, and heap. On all boards tested so far this seems
to be a reasonable assumption.
As a nice side effect, our fdt parsing also winds up being faster since
we avoid the overhead of checking address/size-cells or populating
struct resource. We can safely make these optimisations since we only
support ARM64, and trust the reg property to be populated correctly.
After relocation, we then populate gd->bd->bi_dram with the data we
parsed earlier.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
If U-Boot has a DTB built in (appended to the image directly) then this
was likely intentional, we should prioritise it over one provided by ABL
(if there was one).
Make this behaviour explicit, and panic if no valid DTB could be found
anywhere. Returning an error is not useful in this case as U-Boot would
just crash later in a more confusing way.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
For regulator-fixed-clock, the device's private data is never set so in
fixed_clock_regulator_set_enable() is null and the function cannot
complete successfully.
Rename the _plat structure to _priv to better represent its role and set
this as the private data. As shown by the set_enable() function and by
using the same .of_to_plat hook as regulator-fixed, the platform data is
regulator_common_plat so also set .plat_auto correctly.
Finally, set up the private data by adding a .probe function to look up
the clock and set the member variable.
Fixes: f3b5100aff3 ("regulator: fixed: add possibility to enable by clock")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add driver for TPS6287x step down convertors
Data sheet: https://www.ti.com/lit/ds/slvsgc5a/slvsgc5a.pdf
Signed-off-by: Keerthy <j-keerthy@ti.com>
|
|
The JH7110 SoC uses a GPIO for card detect.
* In the of_to_plat function check if a cd-gpios definition exists and
request the GPIO.
* In the getcd function return the GPIO value in this case.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
