summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-22Convert CONFIG_PEN_ADDR_BIG_ENDIAN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PEN_ADDR_BIG_ENDIAN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_OVERWRITE_ETHADDR_ONCE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_OVERWRITE_ETHADDR_ONCE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22etamin: Rework CONFIG_NAND_CS_INITTom Rini
Enable this in the board Kconfig file, but then check for it via CONFIG_IS_ENABLED so that it will only be true in the non-SPL case, as is done today. As part of this we move some defines local to where they are used as it's board specific. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_MXC_NAND_HWECC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MXC_NAND_HWECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_MONITOR_IS_IN_RAM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MONITOR_IS_IN_RAM As part of this, reword some of the documentation slightly to reflect that this is in Kconfig and not a define now. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22ddr: fsl: Remove CONFIG_MEM_INIT_VALUETom Rini
The way all of the memory init code here works is that we pass 0xDEADBEEF around for the initial value (as it's a well known 'poison' value and so easily recognized in debuggers, etc). The only point of this CONFIG symbol was to pass in a different value for that purpose. Drop this symbol and cleanup the code slightly. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22malta: Rename CONFIG_MALTA to CONFIG_TARGET_MALTATom Rini
Fixup this last remnant of CONFIG_MALTA. Cc: Paul Burton <paul.burton@mips.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_L2_CACHE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_L2_CACHE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_KSNET_NETCP_V1_0 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KSNET_NETCP_V1_0 CONFIG_KSNET_NETCP_V1_5 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22global: Remove unused CONFIG symbolsTom Rini
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22i2c: Remove CONFIG_I2C_MULTI_BUSTom Rini
This functionality is part of the legacy I2C subsystem and is currently unused anywhere. Remove the remaining references. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22env: eeprom: Remove CONFIG_I2C_ENV_EEPROM_BUS supportTom Rini
This functionality is currently unused, and has not been migrated to using DM_I2C, even. Drop this. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22arm: samsung: Rename CONFIG_G_DNL_*_NUM variablesTom Rini
Following how g_dnl_bind_fixup is used on other platforms, rename the unchanging defines used here to be prefixed with EXYNOS rather than Samsung, and define them here. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_HOSTNAME et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_POWER_PCA9450 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_POWER_PCA9450 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22meson64: Fix missing CFG_SYS_BAUDRATE_TABLE migrationTom Rini
CONFIG_SYS_BAUDRATE_TABLE has already been migrated to CFG_SYS but this instance was missed, correct. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22CONFIG_SYS_MPC8xxx_GUTS_ADDR: Migrate to CFG_SYSTom Rini
Due to whitespace, CONFIG_SYS_MPC8xxx_GUTS_ADDR wasn't migrated to CFG_SYS previously. Do this now. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22env: nvram: Drop CONFIG_SYS_NVRAM_ACCESS_ROUTINETom Rini
This option is unused anywhere and likely untested for quite a long while. Drop this support code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_FSL_ESDHC_PIN_MUX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_ESDHC_PIN_MUX Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_FLASH_SHOW_PROGRESS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22fec_mxc: Remove CONFIG_FEC_FIXED_SPEED supportTom Rini
This option is only used on one platform currently. However, with PHYLIB enabled, which this platform also does, this option is not checked and the functional use case is handled. Remove this code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_DM9000_BYTE_SWAPPED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DM9000_BYTE_SWAPPED CONFIG_DM9000_NO_SROM CONFIG_DM9000_USE_16BIT CONFIG_DM9000_DEBUG CONFIG_MXC_GPT_HCLK CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22env: Rework ENV_IS_EMBEDDED and related logic slightlyTom Rini
- Drop CONFIG_BUILD_ENVCRC as this is never set directly but instead means ENV_IS_EMBEDDED, so reference that in code and rename the Makefile usage to BUILD_ENVCRC. - Remove extra-$(CONFIG_ENV_IS_EMBEDDED) line as it could never be true, and likely why there is an extra- line for CONFIG_ENV_IS_IN_FLASH (the only use case today of embedded environments). - With these slight changes we can then see that using the calculated symbol of ENV_IS_EMBEDDED is the right thing to use in any code which needs to know this situation and can remove CONFIG_ENV_IS_EMBEDDED entirely. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_HSMMC2_8BIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_HSMMC2_8BIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22arm: trats2: Set mmcdev directlyTom Rini
Only this platform sets mmcdev via CONFIG_MMC_DEFAULT_DEV so we hard-code that default directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22x530: Remove unused symbolsTom Rini
The symbols CONFIG_UBI_PART and CONFIG_UBIFS_VOLUME are not referenced anywhere, drop them. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22p1_p2_rdb: Remove unused environment sectionsTom Rini
The CONFIG_USB_FAT_BOOT, CONFIG_USB_EXT2_BOOT and CONFIG_NORBOOT defines are not referenced anywhere, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21arm: exynos5: Migrate USB_BOOTING to KconfigTom Rini
This symbol is enabled for all exynos5 platforms, move to Kconfig and select it. Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21usb: Update USB_STORAGE dependenciesTom Rini
As it's no longer possible to have !DM_USB set, we can remove these dependencies. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-21Merge tag 'v2023.01-rc4' into nextTom Rini
Prepare v2023.01-rc4 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-19Prepare v2023.01-rc4v2023.01-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-19Merge tag 'u-boot-rockchip-20221219' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Only call binman when TPL available; - rk3128 DTS fix; - Fix GPT table corruption for rk3399 puma ; - Fix i2c for rk3399 Pinebookpro; - Enable UEFI capsule update for RockPi4;
2022-12-19rockpi4: capsule: Enable UEFI capsule update on RockPi4 boardsSughosh Ganu
Enable the UEFI capsule update functionality on the RockPi4B and RockPi4C boards. Support is being enabled for updating the idbloader and u-boot firmware images residing on GPT partitioned uSD card storage device. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockpi4: board: Add firmware image information for capsule updatesSughosh Ganu
Add information that will be needed for enabling the UEFI capsule update feature on the RockPi4 boards. With the feature enabled, it would be possible to update the idbloader and u-boot.itb images on the RockPi4B and RockPi4C variants. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: capsule: Add functions for supporting capsule updatesSughosh Ganu
Add functions needed to support the UEFI capsule update feature on rockchip boards. Currently, the feature is being enabled on the RockPi4 boards with firmware images residing on GPT partitioned storage media. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19phy: rockchip: handle clock without enable functionJohn Keeping
If a clock doesn't supply the enable hook, clk_enable() will return -ENOSYS. In this case the clock is always enabled so there is no error and the phy initialisation should continue. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: Pinebook Pro: Do not initialize i2c before relocationMichal Suchanek
The i2c locks up when initialized before relocation, and it stays broken in Linux as well breaking the ability to boot Linux. The i2c bus and pmic was not actually used in pre-reloc before commit ad607512f575 ("power: pmic: rk8xx: Support sysreset shutdown method") The cause is not known. This is board-specific, other boards that do not add the option to include the i2c bus in pre-reloc DT are not affected. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: puma: fix GPT table corruption when saving U-Boot environmentQuentin Schulz
The GPT table is taking the first 34 sectors, which amounts to 0x4400 bytes. Saving the environment below this address in storage will corrupt the GPT table. While technically the table ends at 0x4400, some tools (e.g. bmaptool) are rounding everything to the logical block size (0x1000), so it is safer to make it point to 0x5000 so that the environment could still persist when flashing a sparse image with bmaptool or similar tools. Obviously, the default 0x4000 environment size does not work anymore, so let's set it to 0x3000 so it does fill the gap between the GPT table (rounded to 0x1000) and the start of the idbloader.img. Fixes: 56f580d3eb8d ("rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL") Cc: Quentin Schulz <foss+uboot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19arm: dts: rockchip: enable ums/rockusb command for ROCK Pi 4FUKAUMI Naoki
this patch add USB mass storage function and Rockusb function for Radxa ROCK Pi 4 series. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19configs:rockchip:roc-rk3399-pc:Enable more configsManoj Sai
This patch enables the following: 1) use preboot configuration to enable usb devices. 2) Enable USB configs so keyboards and other USB devices work, update the number of ports of the usb root hub. - with this addition the updated USB device Tree: 1 Hub (12 Mb/s, 0mA) U-Boot Root Hub 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Hub (12 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 3) enable crypto RNG support. 4) Change SPI speed and frequency: - increase the maximum SPI slave device speed, SPI flash max frequency for the environment from 10Mhz to 30MHz. - performance stats for speed update from 10MHz to 30MHz: with 10Mhz speed update: => sf update 0x300000 0x800000 0x400000 4194304 bytes written, 0 bytes skipped in 36.819s, speed 119837 B/s with 30Mhz speed update: => sf update 0x300000 0x800000 0x400000 4194304 bytes written, 0 bytes skipped in 20.319s, speed 220752 B/s Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Da Xue <da.xue@libretech.co> Signed-off-by: dsx724 <da@lessconfused.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19arm: dts: rockchip: rk3128: fix clocks, compatible and physJohan Jonker
Fix rk3128 clocks, compatible and phys, so that they match the bindings. Signed-off-by: Johan Jonker <jbx6244@gmail.com>
2022-12-19arm: dts: rockchip: rk3128: fix DT node namesJohan Jonker
The rk3128 DT node names should be generic. Rename them to the pattern defined in the DT bindings. Signed-off-by: Johan Jonker <jbx6244@gmail.com>
2022-12-19arm: dts: rockchip: move all rk3128 u-boot specific properties in separate ↵Johan Jonker
dtsi files Move all rk3128 u-boot specific properties in separate dtsi files. Sort emmc node. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19arm: dts: rockchip: rk3128: bulk convert gpios to their constant counterpartsJohan Jonker
Bulk convert rk3128 DT gpios to their constant counterparts. sed -i -f script.sed rk3128.dtsi sed -i -f script.sed rk3128-evb.dts ================================ /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: rk3128-cru: sync the clock dt-binding header from LinuxJohan Jonker
In order to update the DT for rk3128 sync the clock dt-binding header. This is the state as of v6.0 in Linux. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: enable fdt overlays for ROCK Pi 4 seriesFUKAUMI Naoki
add CONFIG_OF_LIBFDT_OVERLAY=y to support fdt overlays. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: Only call binman when TPL availableKever Yang
Rockchip platform use TPL to do the DRAM initialize for all the SoCs, if TPL is not available, means no available DRAM init program, and the u-boot-rockchip.bin is not functionable. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Change-Id: I2299f1eddce5aa7d5fb1a3fb4d8aeaa995b397fa
2022-12-18Makefile: With BINMAN_ALLOW_MISSING=1 don't error on missingTom Rini
When the user builds with BINMAN_ALLOW_MISSING=1 they're explicitly setting the flag to allow for additional binaries to be missing and so have acknowledged the output might not work. In this case we want to default to not passing a non-zero exit code. Cc: Simon Glass <sjg@chromium.org> Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-18Merge tag 'efi-2023-01-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-01-rc4 Documentation: * Fix htmldoc build dependency UEFI: * Adjust EBBR version for compatibility table
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 15:13:17 +0000