summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-18clk: Add Microchip PolarFire SoC clock driverPadmarao Begari
Add clock driver code for the Microchip PolarFire SoC. This driver handles reset and clock control of the Microchip PolarFire SoC device. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2021-01-18net: macb: Add phy address to read it from device treePadmarao Begari
Read phy address from device tree and use it to find the phy device if not found then search in the range of 0 to 31. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2021-01-18net: macb: Add DMA 64-bit address support for macbPadmarao Begari
Enable 32-bit or 64-bit DMA in the macb driver based on the macb hardware compatibility and it is configured with structure macb_config in the driver. The Microchip PolarFire SoC Memory Protection Unit(MPU) gives the 64-bit DMA access with the GEM, the MPU transactions on the AXI bus is 64-bit not 32-bit So 64-bit DMA is enabled for the Microchip PolarFire SoC GEM. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2021-01-18riscv: Add DMA 64-bit address supportPadmarao Begari
dma_addr_t holds any valid DMA address. If the DMA API only uses 32/64-bit addresses, dma_addr_t need only be 32/64 bits wide. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-18riscv: timer: Add support for an early timerPragnesh Patel
Added support for timer_early_get_count() and timer_early_get_rate() This is mostly useful in tracing. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-18trace: select TIMER_EARLY to avoid infinite recursionPragnesh Patel
When tracing functions is enabled this adds calls to __cyg_profile_func_enter() and __cyg_profile_func_exit() to the traced functions. __cyg_profile_func_enter() and __cyg_profile_func_exit() invoke timer_get_us() to record the entry and exit time. initr_dm() will make gd->dm_root = NULL and gd->timer = NULL, so timer_get_us() -> get_ticks() -> dm_timer_init() will lead to an indefinite recursion. So select TIMER_EARLY when tracing got enabled. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-18riscv: Add support for SPI on Kendryte K210Sean Anderson
This enables configs necessary for using SPI. The environment is saved to the very end of SPI flash. This is unlikely to be overwritten unless the entire flash is reprogrammed. This also supplies a default bootcommand. It loads an image and device tree from the first partition of the MMC. This is a minimal/least effort bootcmd, so suggestions (especially in the form of patches) are welcome. I didn't set up distro boot because I think it is unlikely that any general-purpose linux distros will ever be ported to this board. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Chrstopher Obbard <obbardc@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-18doc: qemu-riscv: Fix opensbi build instructionsAtish Patra
Latest opensbi uses generic platform for Qemu. Update the build instructions. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-16Merge branch '2021-01-15-assorted-improvements'Tom Rini
- Add MBR partition layout writing supporting, clean up code. - A large number of assorted console/iomux cleanups - A large number of board_r related cleanups. - Log enhancements
2021-01-15cmd: Add MBR partition layout control utilityMarek Szyprowski
Add a 'mbr' command to let users create or verify MBR partition layout based on the provided text description. The partition layout is alternatively read from the 'mbr_parts' environment variable. This can be used in scripts to help system image flashing tools to ensure proper partition layout. The syntax of the text description of the partition list is similar to the one used by the 'gpt' command. Supported parameters are: name (currently ignored), start (partition start offset in bytes), size (in bytes or '-' to expand it to the whole free area), bootable (boolean flag) and id (MBR partition type). If one wants to create more than 4 partitions, an 'Extended' primary partition (with 0x05 ID) has to be explicitely provided as a one of the first 4 entries. Here is an example how to create a 6 partitions (3 on the 'extended volume'), some of the predefined sizes: > setenv mbr_parts 'name=boot,start=4M,size=128M,bootable,id=0x0e; name=rootfs,size=3072M,id=0x83; name=system-data,size=512M,id=0x83; name=[ext],size=-,id=0x05; name=user,size=-,id=0x83; name=modules,size=100M,id=0x83; name=ramdisk,size=8M,id=0x83' > mbr write mmc 0 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-15disk: dos: add code for creating MBR partition layoutMarek Szyprowski
Add a code for creating and writing MBR partition layout. The code generates similar layout of EBRs (Exteneded Block Records) and logical volumes as Linux's fdisk utility. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-15disk: dos: make some functions staticMarek Szyprowski
Make functions not used outside this file static. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> [trini: Use __maybe_unused as there are cases they may not be used] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-15disk: dos: use generic macro for unaligned le32 accessMarek Szyprowski
Use a generic helper for reading LE32 integers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-15disk: dos: add some defines for the hardcoded numbersMarek Szyprowski
Add some handy defines for some hardcoded magic numbers related to extended partition handling. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-15disk: dos: rename write_mbr_partition to write_mbr_sectorMarek Szyprowski
write_mbr_partition() function name is a bit misleading, so rename it to write_mbr_sector(). This is a preparation for adding code for writing a complete MBR partition layout. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2021-01-15IOMUX: Stop dropped consolesAndy Shevchenko
When at some point environment shrinks we need to stop dropped devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15IOMUX: Drop indentation level by removing redundant 'else'Andy Shevchenko
Obviously the following has unnecessary indentation level in 'else' branch. if (foo) { ... return; } else { ... } Drop indentation level by removing redundant 'else'. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15IOMUX: Refactor iomux_doenv() in order to increase readabilityAndy Shevchenko
Refactor iomux_doenv() a bit in order to increase readability. There is no change in code generation on x86. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15IOMUX: Preserve console list if realloc() failsAndy Shevchenko
It's realloc() 101 to avoid `foo = realloc(foo, ...);` call due to getting a memory leak. Actually it's not clear why realloc() has been used here. If we shrink the array, the memcpy() overwrites it anyway with the contents of a new array. If it becomes bigger, same story. Drop useless realloc() for good and thus preserve console list in case of failed allocation. Fixes: 16a28ef219c2 ("IOMUX: Add console multiplexing support.") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: Provide a documentation for console_search_dev()Andy Shevchenko
Provide a documentation for console_search_dev(). Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-01-15console: rename search_device() to console_search_dev()Andy Shevchenko
Rename search_device() to console_search_dev() since it's in console.h. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: move search_device() from iomux.h to console.hAndy Shevchenko
search_device() is defined in console.c. Move its declaration to an appropriate header file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: Keep ->start() and ->stop() balancedAndy Shevchenko
There is no need to call ->start() for already started device. All the same, there is no need to call ->stop() for devices still in use. For now enforce this only for IOMUX case. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: Introduce console_start() and console_stop()Andy Shevchenko
In the future we would like to stop unused consoles and also add a reference counting to avoid imbalanced calls to ->start() and ->stop() in some cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: add console_has_tstc helper function for CONSOLE_MUXPatrick Delaunay
Add the helper function console_has_tstc() and replace the test #if CONFIG_IS_ENABLED(CONSOLE_MUX) to a simple 'if' test to respect the U-Boot coding rule. No functional change. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: remove #ifdef CONFIG_CONSOLE_RECORDPatrick Delaunay
Add helper functions to access to gd->console_out and gd->console_in with membuff API and replace the #ifdef CONFIG_CONSOLE_RECORD test by if (IS_ENABLED(CONFIG_CONSOLE_RECORD)) to respect the U-Boot coding rule. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: add function console_devices_setPatrick Delaunay
Add a new function to access to console_devices only defined if CONFIG_IS_ENABLED(CONSOLE_MUX). This path allows to remove #if CONFIG_IS_ENABLED(CONSOLE_MUX) in console_getc function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-01-15console: remove #ifdef CONFIG when it is possiblePatrick Delaunay
Remove #ifdef or #ifndef for CONFIG when it is possible to simplify the console.c code and respect the U-Boot coding rules. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15global_data: Enable spl_handoff only if CONFIG_HANDOFF is setOvidiu Panait
spl_handoff should only be enabled when CONFIG_HANDOFF is set. Drop the nested ifdefs and check for CONFIG_HANDOFF instead. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15spl: Kconfig: Add SPL dependency to CONFIG_HANDOFFOvidiu Panait
CONFIG_HANDOFF is used in u-boot proper to locate handoff info from SPL during pre-relocation init (in setup_spl_handoff). Add explicit dependency on CONFIG_SPL, to fix the following build error when CONFIG_HANDOFF && !CONFIG_SPL: common/board_f.c: In function ‘setup_spl_handoff’: common/board_f.c:283:4: error: ‘gd_t {aka struct global_data}’ has no member named ‘spl_handoff’ gd->spl_handoff = bloblist_find(BLOBLISTT_SPL_HANDOFF, ^~ Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop arch-specific ifdefs around initr_trapOvidiu Panait
In order to remove the arch-specific ifdefs around initr_trap, introduce arch_initr_trap weak initcall. Implementations for ppc/m68k/mips have been moved to arch/<arch>/lib/traps.c Default implementation is a nop stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-01-15common: board_r: Drop initr_bbmii wrapperOvidiu Panait
Add a return value to bb_miiphy_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_api wrapperOvidiu Panait
Add a return value to api_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_jumptable wrapperOvidiu Panait
Add a return value to jumptable_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_xen wrapperOvidiu Panait
Add a return value to xen_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_noncached wrapperOvidiu Panait
Add a return value to noncached_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_pci wrapperOvidiu Panait
Add a return value to pci_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_pci_ep wrapperOvidiu Panait
Add a return value to pci_ep_init and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_post_backlog wrapperOvidiu Panait
Add a return value to post_output_backlog and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_secondary_cpu wrapperOvidiu Panait
Add a return value to cpu_secondary_init_r and use it directly in the post-relocation init sequence, rather than using a wrapper stub. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_r: Drop initr_console_record wrapperOvidiu Panait
Drop initr_console_record wrapper and call console_record_init directly. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_f: Use IS_ENABLED(CONFIG_OF_EMBED) in reserve_fdt, reloc_fdtOvidiu Panait
Use IS_ENABLED(CONFIG_OF_EMBED) in instead of #ifdefs in reserve_fdt, reloc_fdt functions. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_f: Move setup_machine code to setup_bdinfoOvidiu Panait
setup_bdinfo is used to populate various bdinfo fields, so move setup_machine code there, as all it does is setting gd->bd->bi_arch_number. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_f: Use IS_ENABLED(CONFIG_TIMER_EARLY) in initf_dmOvidiu Panait
Use IS_ENABLED(CONFIG_TIMER_EARLY) instead of #ifdef in initf_dm. Also, move timer code to the main ifdef, so that ret is defined. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: board_f: Drop initf_console_record wrapperOvidiu Panait
Drop initf_console_record wrapper and call console_record_init directly. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15common: Kconfig: Introduce CONFIG_CONSOLE_RECORD_INIT_FOvidiu Panait
Currently, the following #ifdef construct is used to check whether to run console_record_init() during pre-relocation init: defined(CONFIG_CONSOLE_RECORD) && CONFIG_VAL(SYS_MALLOC_F_LEN) Introduce CONFIG_CONSOLE_RECORD_INIT_F Kconfig option to get rid of the complex ifdef check. Also, use IS_ENABLED() instead of #ifdef. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15log: call vsnprintf only when it is needed to emit tracePatrick Delaunay
Reduce the log overhead when the traces are filtered, by moving the vsnprintf call from _log() to log_dispatch(). This patch avoids the printf treatment when LOG features is activated, but trace is filtered, for example when MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2021-01-15test: log: add test for console output of dropped messagesPatrick Delaunay
Add a new test to check the content of the dropped messages sent to console puts function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: allow to record console output before readyPatrick Delaunay
Allow to record the console output before before U-Boot has a console ready. This patch allows to test the console output in sandbox test based on console record. It is possible because GD_FLG_RECORD and GD_FLG_SERIAL_READY are 2 independent flags. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-15console: remove duplicated test on gd valuePatrick Delaunay
Reorder test on gd value and remove the duplicated test (!gd) in putc and puts function. This patch is a preliminary step for rework of this function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 13:25:21 +0000