summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-22examples: Don't use LTO for hello_worldTom Rini
If we're building U-Boot with LTO, we don't want to use that for examples as it's more work than required. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-22spl: Add function prototype for spl_mmc_get_uboot_raw_sectorTom Rini
We did not add a prototype for spl_mmc_get_uboot_raw_sector to include/spl.h before, so add and document one now. Correct the incorrect prototype in board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c and ensure that we have spl.h where we define a non-weak spl_mmc_get_uboot_raw_sector as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-22arm: Correct cpu_reset function prototype on some platformsTom Rini
Some platforms were not including <cpu_func.h> which sets the prototype for reset_cpu, and in turn had it set wrong. Correct these cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-22proftool: Remove unused variables in make_flame_treeTom Rini
With clang-15 we now get reported that in the make_flame_tree function, neither the missing_count nor depth variables are used, only incremenete/decremented. Remove these. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-22imx8image: Remove unused cont_img_count variableTom Rini
With clang-15, it is now reported that cont_img_count is unused. This is true as the code will increment / reset this counter, but never functionally use it. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-03-22zlib: trees.c: Fix a warning with clang-15Tom Rini
With clang-15 we now will get warnings such as: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] And it is easy enough to address this warning here, even if we would like to stay in sync more with upstream as it's a single location. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-22libavb: Fix a warning with clang-15Tom Rini
With clang-15 we now will get warnings such as: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] And it is easy enough to address this warning here, as we aren't concerned with re-syncing with an upstream. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-22dlmalloc: Fix a warning with clang-15Tom Rini
With clang-15 we now will get warnings such as: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] And it is easy enough to address this warning here, as we aren't concerned with re-syncing with an upstream. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-22global: Disable deprecated-non-prototype warning with clangTom Rini
We have a number of places in the code which use the following syntax: void func(a, b, c) int a; /* Does a */ something_t *b; /* Pointer to b */ int c; /* Does c */ { ... } Which while not what we document as our coding style, this is also code which we have imported from other projects, and would like to re-sync with in the future. While the biggest example of this is the zlib code, there are other places as well. For now, we will silence this warning. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-22Merge branch '2023-03-21-assorted-CI-updates' into nextTom Rini
- Assorted improvements to our GitLab and Azure infrastructure.
2023-03-21CI: Allow a mirror to be specified for Docker HubPeter Hoyes
To conserve bandwidth and potentially avoid rate limits, allow a local mirror of Docker Hub to be specified globally. The default value is unchanged. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-03-21CI: Allow job tag to be optionally set globallyPeter Hoyes
The default behavior of Gitlab runners is to only run jobs which match the configured tag, although there is an option to run untagged jobs [1]. To support running the CI in more complex environments where different types of runners may be present that support different tags, allow the DEFAULT_TAG for all jobs in the pipeline to be set globally using an environment variable. An empty default value is provided to retain support for untagged runners. [1] https://docs.gitlab.com/ee/ci/runners/configure_runners.html#use-tags-to-control-which-jobs-a-runner-can-run Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-03-21CI: gitlab: Collect pytest artifactsMarek Vasut
Copy build artifacts for all test.py tests, so they show up in artifacts storage for later inspection. The test.py tests output in CI is basically useless, but it is far more useful in the html output for analysis and debugging. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-21Azure CI: Be explicit about pytest cache directoryTom Rini
The default pytest cache directory is in a read-only directory in Azure, which results in a warning on the build page. Use the pytest command line option to set the cache dir to somewhere writable. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-21Azure CI: Save pytest output automaticallyTom Rini
Enable use of the python-azurepipelines package which provides automatic formatting and uploading of the pytest output. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-21Dockerfile: Update to latest "Jammy" tagTom Rini
Update to using the latest "Jammy" tag as our base. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-21Dockerfile: Add m68k-softmmu to qemuTom Rini
Given efforts to add an m68k target to CI, build qemu for it. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-20Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini
into next
2023-03-20Merge branch '2023-03-17-improve-read-command-add-write-command' into nextTom Rini
To quote the author: The first patch simplies do_read somewhat by making use of an existing helper instead of parsing the dev_part string manually. As a bonus (and my actual motivation), it now understands dev#partname syntax - hard-coded partition numbers are so last decade. I also need the symmetrical operation, being able to write to a named raw partition, and fortunately it doesn't require that many lines of code to implement that. There's a very minor change in the error reporting due to using cmdtp->name to generate the new messages, but I don't think "Error reading blocks" offers much that "read error" doesn't. New in v2: the last three patches add documentation, ensure CMD_WRITE is set for sandbox and adds some basic test cases for the various ways of accessing the partitions (by number, name, or as raw offset within the whole disk). v3: Add Simon's R-b to patches 2, 4, 5, fixup whitespace in patch 5. I don't want to duplicate the documentation, but I can see the value in 'write' having its own entry in the TOC, so I added a stub write.rst that just refers to the read.rst, which then explicitly documents both.
2023-03-18serial: sh: Make indent consistentMarek Vasut
Make the indent of these macro elements consistent with the rest of this table. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18serial: sh: Add DEBUG_UART supportMarek Vasut
Add support for debug output very early during boot using the DEBUG_UART mechanism. This uses a static fixed UART port configuration selected via Kconfig options and dedicated print functions from debug_uart.h. This is useful e.g. when debugging problems so early during boot, that not even the DM is initialized at that point, and thus DM_SERIAL is not available either. This functionality is disabled by default. To activate it, define the following Kconfig options and select SCIF type using CFG_SCI/CFG_SCIF_A/ CFG_HSCIF/<nothing for regular SCIF>: CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_SCIF=y CONFIG_DEBUG_UART_BASE=0xe6540000 CONFIG_DEBUG_UART_CLOCK=24000000 The later two options define the SCIF physical base address and SCIF input clock in Hz. Optionally, to validate DEBUG_UART works, enable the following as well to get early serial output message by default: CONFIG_DEBUG_UART_ANNOUNCE=y Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18serial: sh: Rename CONFIG_SCI and CONFIG_SCIF_USE_EXT_CLK to CFG_ variantsMarek Vasut
Both CONFIG_SCI and CONFIG_SCIF_USE_EXT_CLK options do not have a matching Kconfig entry because they are internal to the SCIF driver. Change their prefix to CFG_, i.e. CFG_SCIF_USE_EXT_CLK and CFG_SCI, to reflect that and avoid interferring with Kconfig symbols. Since neither of those options are defined elsewhere, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18pinctrl: renesas: Replace ifdeffery with IS_ENABLED()Marek Vasut
Switch ifdef in sh_gpio_get_value() to IS_ENABLED() macro. The CONFIG_RCAR_GEN3 will never have SPL counterpart, so the IS_ENABLED() macro is the right one here. No functional change, except for improved build test coverage. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18net: ravb: Support fixed PHY in R-CarMikhail Lappo
Calling old U-Boot API doesn't allow to use fixed PHY. Searching by mask is the part of new function, after scanning FDT for a fixed PHY definition Fixes: e821a7bdb13 ("net: ravb: Detect PHY correctly") Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Mikhail Lappo <mikhail.lappo@esrlabs.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> [Hai Pham: Drop phy_connect_dev since it's called in phy_connect] Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Use mask -1 instead of 0 to reinstate the search behavior over all PHY addresses. Add Fixes tag, sort the tag list.]
2023-03-18i2c: rcar_i2c: Sort Kconfig depends list ascendingMarek Vasut
Sort the list of "depends" symbols in ascending order. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2023-03-18i2c: rcar_iic: Sort Kconfig depends list ascendingMarek Vasut
Sort the list of "depends" symbols in ascending order. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2023-03-18clk: renesas: rcar-gen3: Replace SSCG caching with MDSEL/PE cachingMarek Vasut
Do not cache the single CPG MODE register bit 12, instead cache the entire register value, and only pick the matching bit from the cached value when core clock of type MDSEL or PE are used. Both MDSEL and PE clock type currently define .offset field as 12 on Gen3, which means this code will use bit 12 on Gen3 again, however there are additional clock on Gen4 which use different bits, and having this flexibility in place now will be useful when adding Gen4. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: rmobile: Split R-Car Gen3 into separate Kconfig from common 64bit optionsMarek Vasut
There are multiple shared Kconfig options between R-Car Gen3 and Gen4. Keep the common options in Kconfig.64 and move the R-Car Gen3 specific options into separate Kconfig.rcar3 . The Kconfig.rcar3 contains SoC and board list, which is limited to R-Car Gen3. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: rmobile: Introduce CONFIG_RCAR_64 symbolMarek Vasut
Introduce common Kconfig symbol for 64bit R-Car platforms and move common configuration options into it. This is preparatory patch to prevent duplication of Kconfig lists later on, when Gen4 is added. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: rmobile: Factor out SYS_SOC Kconfig optionMarek Vasut
Pull the SYS_SOC Kconfig option to avoid duplication of this option in Kconfig.{32,64,rza1} . The default value is the same, so just set it in one location. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: rmobile: Sort R-Car Gen3 Kconfig listsMarek Vasut
Sort the 'imply' and 'select' lists in R-Car Gen3 Kconfig options. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: rmobile: Convert ifdef in rmobile_get_prr() to IS_ENABLED()Marek Vasut
Switch ifdef in rmobile_get_prr() to IS_ENABLED() macro. The CONFIG_RCAR_GEN3 will never have SPL counterpart, so the IS_ENABLED() macro is the right one here. No functional change, except for improved build test coverage. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: renesas: falcon: Enable RWDT reset for V3U FalconHai Pham
Enable RWDT reset on Reset Controller so that it can be used as reset trigger source for V3U Falcon. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Use one current_el() in board_init
2023-03-18ARM: renesas: falcon: Initialize ARM generic timer and GICv3 if EL3Hai Pham
U-Boot executes at EL3 is required to initalize those settings. In other cases, they will be done by prior-stage firmware instead. This fixes crash when U-Boot is at non-secure exception level. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: renesas: Enable DTO support by default on R-Car Gen3Marek Vasut
All R-Car Gen3 defconfigs present in U-Boot do enable DTO support, enable it for all of R-Car Gen3 by default in Kconfig instead, so that no new boards would miss this functionality. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: renesas: Demote overlap memory nodes message to debug on Gen3Hai Pham
The R-Car DTs might contains multiple /memory@* nodes from various sources, i.e. prior firmware, u-boot itself or the OS The duplicates are likely to happen so the messages are not meaningful in the default setting since we have already handled that. Reduce the message to debug level. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-18ARM: renesas: Remove defines for USB on Eagle/CondorHai Pham
The Eagle board based on R-Car V3M, which does not support any USB interfaces. The same applies for the Condor board based on R-Car V3H. Remove the defines. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-17test: add tests of 'read' and 'write' shell commandsRasmus Villemoes
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-03-17sandbox: enable CMD_WRITERasmus Villemoes
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-03-17doc: document read/write commandsRasmus Villemoes
The read and write commands are, deliberately, implemented in the same file, so that they stay feature-compatible (e.g. if someone implements support for "read the full partition, however large that is", that same syntax should also work for write). In order to ensure the documentation for both are similarly kept in sync, and to avoid duplication, document them both in read.rst, and add a stub write.rst referring to read.rst. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-17cmd: introduce 'write' commandRasmus Villemoes
It's almost no extra code to hook up a buddy to the 'read' command. In fact, since the command is passed its own 'struct cmd_tbl', we can use the exact same callback, and let it figure out for itself whether it was invoked as "read" or "write". Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-03-17cmd: read: use part_get_info_by_dev_and_name_or_num() instead of open-coded ↵Rasmus Villemoes
dev_part parsing Use the helper part_get_info_by_dev_and_name_or_num() for parsing a dev[:part] string and obtaining the partition info in one go, instead of open-coding all that. As a bonus, this will automatically allow using the dev#partname syntax as well, for accessing raw partitions by name. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-03-16Merge tag 'xilinx-for-v2023.07-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2023.07-rc1 cmd: - Print results in hex instead of dec in smc command firmware: - Cover missing ZYNQMP_FIRMWARE dependencies fpga: - fix loads for unencrypted use case relocation - Add support for BE systems spi: - Fix xilinx_spi init reset sequence arasan nand: - Remove hardcoded bbt option - Set ofnode value xilinx: - Enable SMC command - Fix some sparse issues zynqmp: - Remove cdns,zynq-gem compatible string - Add optee node - Some DT cleanups zynq: - Some DT cleanups microblaze - Remove MANUAL_RELOC option
2023-03-16Merge tag 'fsl-qoriq-next-2023-3-14' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next Enable DM_SERIAL for freescale ls2080a Drop non DM_ETH code for freescale: lx2160a/ls2080rdb/ls2080aqds/ls1088a
2023-03-16Revert 9f62a472dfb2 ("video: Remove duplicate cursor-positioning function")Tom Rini
This reverts commit 9f62a472dfb26ec14408a27938ddd2a25700009d. The changes here aren't quite right, and on platforms such as Raspberry Pi where we can have both serial and video output, the change above causes output to change. This can be seen as the hush tests we have now fail. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-16Merge tag 'dm-next-12mar23a' of git://git.denx.de/u-boot-dm into nextTom Rini
More tests and fixes for fdt command binman signing feature fix buildman -A bug introduced recently Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-14buildman: Fix CROSS_COMPILE output for sandboxSimon Glass
The previous attempt at fixing this broke the normal usage of the -A flag. At present, 'buildman -A sandbox' adds the path containing the toolchain. We can assume that this is in the path and we don't want to set CROSS_COMPILE=/bin/ Change this to align with what MakeEnvironment() does, but only for sandbox boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14Revert "buildman: Correct CROSS_COMPILE output for sandbox"Simon Glass
This reverts commit bd0a548ad4a155fec29473d4cc8e135832926973. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14tools: add fdt_add_pubkeyRoman Kopytin
Having to use the -K option to mkimage to populate U-Boot's .dtb with the public key while signing the kernel FIT image is often a little awkward. In particular, when using a meta-build system such as bitbake/Yocto, having the tasks of the kernel and U-Boot recipes intertwined, modifying deployed artifacts and rebuilding U-Boot with an updated .dtb is quite cumbersome. Also, in some scenarios one may wish to build U-Boot complete with the public key(s) embedded in the .dtb without the corresponding private keys being present on the same build host. So this adds a simple tool that allows one to disentangle the kernel and U-Boot builds, by simply copy-pasting just enough of the mkimage code to allow one to add a public key to a .dtb. When using mkimage, some of the information is taken from the .its used to build the kernel (algorithm and key name), so that of course needs to be supplied on the command line. Signed-off-by: Roman Kopytin <Roman.Kopytin@kaspersky.com> Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-03-14binman: add tests for sign optionIvan Mikhaylov
Add the test which provides sequence of actions: 1. create the image from binman dts 2. create public and private keys 3. add public key into dtb with fdt_add_pubkey 4. 1. sign FIT container with new sign option with extracting from image 2. sign exact FIT container with replacing of it in image 5. check with fit_check_sign Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Renumber test file from 277 to 280; Move UpdateSignatures() to Entry base class; Don't allow missing mkimage as it doesn't make sense; Propagate --toolpath for CI; Call mark_build_done() to avoid regenerating FIT: Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-09 00:50:07 +0000