summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-09-14pinctrl: fix typoYuan Fang
fix typo in pinctrl Kconfig file to avoid git commit failure on some commit hooks check. Signed-off-by: Yuan Fang <fangyuanseu@gmail.com>
2021-09-14lib: fix typos in KconfigOleksandr Suvorov
There are trivial typos in the Kconfig file. Fixed them. Also, fixed grammar in the descriptions with typos. Fixes: d56b4b1974 ("configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS") Fixes: 7264f2928b ("spl: fit: Eanble GZIP support for image decompression") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-09-14lib/rsa: don't use NULL as key_idHeinrich Schuchardt
If keydir is not provided but name is we want to use name as key_id. But with the current coding name is only used on its own if it is NULL and keydir is provided which never occurs. Fixes: 824ee745fbca ("lib/rsa: Use the 'keyfile' argument from mkimage") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-13Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- a fix for U-Boot 2021.10 to bring back MMC boot on older boards.
2021-09-14sunxi: mmc: A20: Fix MMC optimisationAndre Przywara
Some SoCs (as seen on A20) seem to misreport the MMC FIFO level if the FIFO is completely full: the level size reads as zero, but the FIFO_FULL bit is set. We won't do a single iteration of the read loop in this case, so will be stuck forever. Check for this situation and use a safe minimal FIFO size instead when we hit this case. This fixes MMC boot on A20 devices after the MMC FIFO optimisation (9faae5457f52). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-09-13Merge branch '2021-09-09-finish-pre-DM_PCI-removal'Tom Rini
- Finish removing the non-DM_PCI legacy code.
2021-09-13pci: Drop DM_PCISimon Glass
This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13pci: Drop PCI_INDIRECT_BRIDGESimon Glass
This does not work with driver model so can be removed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13net: Drop DM_PCI check from designware driverSimon Glass
We don't need this check anymore since when PCI is enabled, driver model is always used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13pci: acpi: Drop DM_PCI check from ahciSimon Glass
We don't need these checks anymore since when PCI is enabled, driver model is always used. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13pci: Drop DM_PCI check from fdtdecSimon Glass
We don't need this check anymore since when PCI is enabled, driver model is always used. Sadly this doesn't work with nds32 for some reason to do with the toolchain. Add a work-around for that. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13pci: Drop old code from header fileSimon Glass
We don't need this code anymore since when PCI is enabled, driver model is always used. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13ppc: Remove UCP1020 boardSimon Glass
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Note that we have to add CONFIG_SPIFLASH to scripts/config_whitelist.txt because it's not really migrated at this point. Acked-by: Michael Durrant <mdurrant@arcturusnetworks.com> Acked-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> Acked-by: Oleksandr Zhadan and Michael Durrant <arcsupport@arcturusnetworks.com> Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Handle CONFIG_SPIFLASH differently and delete Kconfig file] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-13Merge tag 'mmc-2021-9-13' of https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Support using mmc command for enumerating mmc card in a given mode Fix device_remove in mmc Fix switch issue with send_status disabled Drop 1ms delay in fsl_esdhc command sending Revert "mmc: sdhci: set to INT_DATA_END when there are data"
2021-09-13mmc: fsl_esdhc: remove 1ms sleep in esdhc_send_cmd_common()Michael Walle
Since the beginning of this driver which was initially for the MPC8379 and MPC8536 SoCs, there is this spurious 1ms delay. According to the comment it should actually be only 8 clock cycles. Esp. during EFI block transfers, this 1ms add up to a significant delay and slows down EFI boot. I couldn't find any mention in the MPC8536 that there should be a delay of 8 clock cycles between commands. The SD card specification mentions that the clock has to be left enabled for 8 cycles after a command or response. But I don't see how this delay will help with this. Go ahead and just remove it. If there will ever be any regression we can introduce a compile time flag, but for now I'd like to keep it simple. In the split off imx driver this delay was also removed in commit 9098682200e6 ("mmc: fsl_esdhc_imx: remove the 1ms delay before sending command"). Signed-off-by: Michael Walle <michael@walle.cc>
2021-09-12Merge tag 'efi-2021-10-rc4-2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc4-2 Documentation: * improve documentation of U-Boot for /config DT node * integrate bloblist documentation UEFI: * correct usage of EFI_CALL() * code tidy up
2021-09-11Merge branch '2021-09-10-assorted-TI-updates'Tom Rini
- A number of TI platform bugfixes
2021-09-11efi_loader: simplify efi_watchdog_timer_notify()Heinrich Schuchardt
We can call do_reset() directly without invoking the UEFI API. This decreases the code size. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11efi_loader: eliminate EFI_CALL() in nvedit_efi.cHeinrich Schuchardt
Reduce the code size by avoiding using the external UEFI API and using our internal functions instead. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11efi_loader: Remove incorrect calls of EFI_CALL in TCG2Ilias Apalodimas
There is two unneeded EFI_CALL references in tcg2_measure_pe_image(). The first one in efi_search_protocol() and the second on in the device path calculation. The second isn't even a function we should be calling, but a pointer assignment, which happens to work with the existing macro. While at it switch the malloc call to a calloc, remove the unnecessary cast and get rid of an unneeded if statement before copying the device path Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11efi_loader: require CONFIG_BLKHeinrich Schuchardt
The move to driver model should by now be completed. To be able to remove pre-driver model code from our block IO code require CONFIG_BLK=y for UEFI support. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11efi_loader: boot_service_capability_min should be capitalizedMasahisa Kojima
boot_service_capability_min is constant, it should be capitalized. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11doc: Complete the list of available runtime-config optionsSimon Glass
The current list is missing a few items. Add them. Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11doc: Tidy up the bindings for the config/ nodeSimon Glass
Sort these and add a type so it is clear how to set the value. Add a note about usage to the top. Correct the 'no-keyboard' binding which is missing a prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-11bloblist: Move to rST formatSimon Glass
Move this documentation to the new format. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-09-11doc: board: toradex: fix file namesOleksandr Suvorov
Fix the documentation file names: s/apalix/apalis/. Fixes: e98ea49a0e ("toradex: MAINTAINERS: entries for new reST docs") Fixes: 3730106cf0 ("doc: board: apalis-imx8x: add documentation") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-10configs: j72*_evm: Define the buffer sizes for dfuAswath Govindraju
On J721e R5 SPL, dfu buffer for loading sysfw.itb image gets allocated before DRAM gets initialized. So, the buffer gets allocated in MCU L3 RAM. The current buffer size to be allocated is 256KB and the available total heap memory is 0x70000 (448KB). This leads to NOMEM errors during allocation. In other cases when constraints such as above are not present fix the size of buffers to the sector size in OSPI for proper functioning. Also, if CONFIG_SYS_DFU_DATA_BUF_SIZE is defined and CONFIG_SYS_DFU_MAX_FILE_SIZE is not defined then the max file size for dfu transfer is defined as CONFIG_SYS_DFU_DATA_BUF_SIZE. Fix these by setting appropriate buffer sizes in their respective defconfig files and defining the max file size as 8 MB which is the default dfu buffer size. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-10environment: ti: k3_dfu: Increase the size allocated for bootloader images ↵Aswath Govindraju
in dfu_alt_info_ram The size of u-boot.img is above 1MB and that of tispl.bin is close to 1MB, in case of j721e. Therefore, increase the sizes allocated for tispl.bin and u-boot.img to 2 MB and 4 MB respectively, in dfu_alt_info_ram environment variable. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-10arm: dts: k3-j721e-r5-*.dts: Fix clock-names property in the usb0 instanceAswath Govindraju
In the cdns3 usb driver, the clock name looked for is ref. Therefore, fix the clock-names property in usb0 instance for proper initialization of cdns3 usb gadget driver. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-10ARM: dts: Fix node status to "okay" on TI boardsRoger Quadros
As per Device Tree Specification [1], the status parameter of nodes can be "okay", "disabled", etc. "ok" is not a valid parameter. U-boot Driver Model does not recognize status="ok" either and treats the node as disabled. [1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3 Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Nishanth Menon <nm@ti.com>
2021-09-10tools: k3_fit_atf: Fix DM binary FIT load addressesSuman Anna
The DM binary runs on the MCU R5F Core0 after R5 SPL on J721E and J7200 SoCs. The binary is built alongside the TFA, OPTEE and A72 SPL binaries and included in the tispl.bin FIT image. The R5 SPL loads the DM binary at 0xA0000000 address, based on the value used in the FIT image build script. The DM binary though is an ELF image and not a regular binary file, and so is processed further to load the actual program segments using the U-Boot's standard ELF loader library. The DM binary does leverage a certain portion of DDR for its program segments, and typically reserves 16 MB of DDR at 0xA0000000 with the 1st MB used for IPC between Linux and the remote processor, and remaining memory for firmware segments. This can cause an incomplete loading of the program segments if the DM binary is larger than 1 MB, due to overlap of the initial loaded binary and the actual program segments. Fix this by using the address 0x89000000, which matches the current "addr_mcur5f0_0load" env variable used by R5 SPL before the DM firmware inclusion into the tispl.bin. Fixes: df5363a67f35 ("tools: k3_fit_atf: add DM binary to the FIT image") Signed-off-by: Suman Anna <s-anna@ti.com>
2021-09-10arm: dts: k3-am642-evm-u-boot: Add u-boot, dm-spl tag in the pinmux node of mmc1Aswath Govindraju
Add u-boot,dm-spl tag in the pinmux device tree node, required for MMCSD1 subsystem. Fixes: b6059ddc45b9 ("arm: dts: k3-am642: Add r5 specific dt support") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-10am33xx: Fix USB for am335x boardsMatwey V. Kornilov
USB nodes were mistakenly disabled in commit 942853dd96df ("arm: dts: Resync BeagleBone device trees") This commit is to fix the following issue: starting USB... No working controllers found USB is stopped. Please issue 'usb start' first. starting USB... No working controllers found Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0782e8572ce43f521ed6ff15e4a7ab9aa5acdc85 Fixes: 942853dd96df ("arm: dts: Resync BeagleBone device trees") Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Paul Barker <paul.barker@sancloud.com>
2021-09-10include: configs: am64x_evm: Add env variables for booting to kernel using ↵Aswath Govindraju
USB MSC device Add env variables for booting to kernel from USB MSC device. The second partition in the USB MSC device needs to formatted as ext4 file system with kernel and dtb images, present in the /boot folder. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-10environment: ti: mmc.h: Make the finduuid generic for usage across different ↵Aswath Govindraju
device types Make finduuid generic by making it dependent on the boot variable. For example, this can now be used for finding the uuid of partitions in usb device too. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-10board: ti: am64x: Add support for fixing dr_mode while booting from USBAswath Govindraju
Fix the dr_mode in the U-Boot device tree blob, by reading the mode field from the USB Boot Configuration fields. The dr_mode will only be fixed when booting from USB. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-10ARM: omap3: evm: Enable booting 'fitImage' with DEFAULT_FIT_TI_ARGSDerald D. Woods
This commit uses the existing DEFAULT_MMC_TI_ARGS and DEFAULT_FIT_TI_ARGS defintions to replace the 'mmc*' environment variables in the configuration. The check for the 'boot_fit' is handled like the 'am335x_*' boards with 'CONFIG_BOOTCOMMAND'. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2021-09-10arm: am335x: Enable SPL_OF_CONTROL on some configsTom Rini
Both am335x_boneblack_vboot and am335x_evm_spiboot require SPL_OF_CONTROL to function but are currently missing this option. Add it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-10Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- mvebu: dts: Armada8k enable mdio (Sven) - a37xx: pci: Fix / enhance error handling (Pali) - mvebu: espressobin/turris_: Enable GPT partition support (Pali) - mvebu: sata_mv: Probe all ports (Tony) - a37xx: pci: Don't spam about PIO Response Status (Marek)
2021-09-10mmc: fix device_remove when HS400_ES is enabledYe Li
HS400_ES is missed when down grade to HS mode during device_remove the mmc device Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-09-10mmc: fix switch issue with send_status disabledYe Li
When send_status is false or wait_dat0 is not supported, the switch function should not send CMD13 but directly return. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-09-10doc: usage: mmc: Document usage of speed mode in "mmc dev" and "mmc rescan"Aswath Govindraju
Add documentation on the usage of "mmc dev" and "mmc rescan" commands to set user defined speed modes. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2021-09-10mmc: Add support for enumerating MMC card in a given mode using mmc commandAswath Govindraju
Add support for enumerating MMC card in a given mode using mmc rescan and mmc dev commands. The speed mode is provided as the last argument in these commands and is indicated using the index from enum bus_mode in include/mmc.h. A speed mode can be set only if it has already been enabled in the device tree. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-09-10Revert "mmc: sdhci: set to INT_DATA_END when there are data"Yuezhang.Mo@sony.com
This reverts commit 17ea3c862865c0d704646f67dbf8412f9ff54f59. In eMMC specification, for the response-with-busy(R1b, R5b) command, the DAT0 will driven to LOW as BUSY status, and in sdhci specification, the transfer complete bit should be wait for BUSY status de-assert. All response-with-busy commands don't contain data, the data judgement is no need. Signed-off-by: Yuezhang.Mo <Yuezhang.Mo@sony.com> Reviewed-by: Andy Wu <Andy.Wu@sony.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-09-10arm: a37xx: pci: Don't spam about PIO Response StatusMarek Behún
Use dev_dbg() instead of dev_err() in pcie_advk_check_pio_status(). For example CRS is not an error status, it just says that the request should be retried. Without this, U-Boot spams the terminal with pcie_advk pcie@d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x100000 pcie_advk pcie@d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x108000 pcie_advk pcie@d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x110000 pcie_advk pcie@d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x120000 pcie_advk pcie@d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x128000 pcie_advk pcie@d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x130000 ... when a device is not connected to a PCIe switch (Unsupported Request from the switch). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-10arm: marvell: Dreamplug: fix typo in eth1 nameTony Dinh
Ethernet 1 should be ethernet-controller@76000. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-10arm: mvebu : sata_mv should probe all portsTony Dinh
While a board could have multiple SATA ports, some of the ports might not have a disk attached to them. So while probing for disks, sata_mv_probe() should continue probing all ports, and skip one with no disk attached. Tests with: - Seagate Goflex Net (Marvell Kirkwood 88F6281) out-of-tree u-boot. - Zyxel NSA325 (Marvell Kirkwood 88F6282 out-of-tree u-boot. Observation: If a board has 2 or more SATA ports, and there is only one disk attached to one of the ports, sata_mv_probe() does not return a successful probe status. And if only one disk is attached to the 2nd port (i.e. port 1), it is not probed at all. Patch Description: Let sata_mv_probe() continues probing all ports, even if there is error in probing a given port, and then return a successful status if there is at least one port was probed successfully. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-10arm: mvebu: a38x: Fix 5200000 baudratePali Rohár
Fix baudrate value 5150000 which was added in commit ead4864fa6cc ("arm: mvebu: a38x: Define supported UART baudrates"). Exact value for divisor 3 with 250 MHz TCLK is 5208333 baudrate. In above commit I incorrectly rounded it to 5150000 value due to testing with USB-UART hw which incorrectly reported exact value and divisor configured on other other end of UART link. Fix this value to 520000 baudrate which is more close to the exact hardware value and also has less fraction parts. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: ead4864fa6cc ("arm: mvebu: a38x: Define supported UART baudrates") Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-10arm: mvebu: espressobin: Enable GPT partition supportPali Rohár
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-10arm: mvebu: turris_{omnia, mox}: GPT partition supportPali Rohár
This allows U-Boot to access filesystems on GPT partitioned disks. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 02:36:34 +0000