summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-19clk: rockchip: rk3568: add stubs for CLK_PCIEPHY_REF clocksVasily Khoruzhick
Device tree contains assigned-clock-rates property for these, but default value will work just fine Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2023-03-19rockchip: include: configs: Remove unused SDRAM_BANK_SIZEJonas Karlman
Remove unused SDRAM_BANK_SIZE define. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: include: configs: Remove dangling commentsJonas Karlman
This removes dangling comments that no longer serve a purpose and has been left after conversion of defines to Kconfig option. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19mmc: rockchip_dw_mmc: Fix get_mmc_clk return valueJonas Karlman
The get_mmc_clk ops is expected to set a clock rate and return the configured rate as an unsigned value. However, if clk_set_rate fails, e.g. using a fixed rate clock, a negative error value is returned. The mmc core will treat this as a valid unsigned rate and tries to configure a divider based on this bogus clock rate. Use 0 as the return value when setting clock rate fails, the mmc core will configure to use bypass mode instead of using a bogus divider. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: tinker-rk3288: Use common BOOT_TARGET_DEVICESJonas Karlman
Building U-Boot for Tinker Board with USB or NET Kconfig option disabled result in the following build error: In file included from include/configs/rk3288_common.h:29, from include/configs/tinker_rk3288.h:14, from include/config.h:3, from include/common.h:16, from env/common.c:10: include/config_distro_bootcmd.h:302:9: error: expected '}' before 'BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:302:9: note: in definition of macro 'BOOTENV_DEV_NAME_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/configs/tinker_rk3288.h:21:9: note: in expansion of macro 'BOOTENV_DEV_NAME' 21 | func(USB, usb, 0) \ | ^~~~ include/config_distro_bootcmd.h:454:25: note: in expansion of macro 'BOOT_TARGET_DEVICES' 454 | "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0" | ^~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:474:9: note: in expansion of macro 'BOOTENV_BOOT_TARGETS' 474 | BOOTENV_BOOT_TARGETS \ | ^~~~~~~~~~~~~~~~~~~~ include/configs/rk3288_common.h:40:9: note: in expansion of macro 'BOOTENV' 40 | BOOTENV | ^~~~~~~ include/env_default.h:122:9: note: in expansion of macro 'CFG_EXTRA_ENV_SETTINGS' 122 | CFG_EXTRA_ENV_SETTINGS | ^~~~~~~~~~~~~~~~~~~~~~ In file included from env/common.c:32: include/env_default.h:29:36: note: to match this '{' 29 | const char default_environment[] = { | ^ make[2]: *** [scripts/Makefile.build:256: env/common.o] Error 1 The BOOT_TARGET_DEVICES defined in rockchip-common.h include the same devices as defined in tinker_rk3288.h, remove the board specific one to fix building with USB or NET option disabled. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: rk3588: Add boot device detectionJonas Karlman
Enable SPL on RK3588 to detect which device it was booted from. Fixes use of same-as-spl in u-boot,spl-boot-order prop. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19clk: rockchip: rk3588: Fix clk_aux16m in clock driverJonas Karlman
The rate and error value is not returned for aux16m clocks, fix this. Fixes: 7a474df74023 ("clk: rockchip: Add rk3588 clk support") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19clk: rockchip: rk3568: Fix reset handlerPeter Geis
The reset handler for rk3568 is missing its private data. This leads to an abort when a reset is triggered. => reset resetting ... "Synchronous Abort" handler, esr 0x96000045 elr: 0000000000a2bc04 lr : 0000000000a2bbd4 (reloc) elr: 00000000eff9bc04 lr : 00000000eff9bbd4 x0 : 00000000fdd20000 x1 : 0000000014000001 x2 : 000000000000fdb9 x3 : 00000000edf77e88 x4 : 00000000edf50e78 x5 : 00000000edf77530 x6 : 000000000000001d x7 : 00000000edf8a1d0 x8 : 00000000ffffffd8 x9 : 0000000000000008 x10: 000000000000000d x11: 0000000000000006 x12: 000000000001869f x13: 0000000086c290c5 x14: 000000009118e878 x15: 0000000000000000 x16: 00000000eff9bbb8 x17: 0000000012f8c119 x18: 00000000edf50dc0 x19: 0000000000000000 x20: 0000000000000001 x21: 0000000000000000 x22: 00000000edf85900 x23: 0000000000000001 x24: 00000000effe8bbc x25: 0000000000000000 x26: 00000000edf85940 x27: 0000000000000000 x28: 0000000000000000 x29: 00000000edf3c8e0 Code: d65f03c0 d5033fbf b9400661 529d9502 (b8216802) Resetting CPU ... Add the missing dev_set_priv to the rk3568 clk driver to fix this. Fixes: 4a262feba3a5 ("rockchip: rk3568: add clock driver") Signed-off-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # radxa-cm3 Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2023-03-19rockchip: rk3568-rock-3a: Sync device tree from linuxJonas Karlman
Running U-Boot from eMMC on a ROCK 3 Model A result in the following: U-Boot SPL 2023.04-rc3 (Mar 11 2023 - 17:24:48 +0000) Trying to boot from MMC1 Card did not respond to voltage select! : -110 spl: mmc init failed with error: -95 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The sdhci node is missing in board device tree, sync device tree from linux v6.3-rc1 to fix booting from eMMC. Also disable sdmmc2 and uart1 nodes related to using a WiFi and BT module in the M2 slot. Fixes: b44c54f600ab ("arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board support") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: rk3568: Fix boot device detectionJonas Karlman
The boot source node path for emmc is using the old sdhci name. Replace with correct mmc name and also add same-as-spl to boot order. Fixes: 0d61f8e5f1c0 ("rockchip: rk3568: add boot device detection") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: Fix early use of bootph propsJonas Karlman
Running U-Boot on a ROCK 3 Model A result in the following: No serial driver found resetting ... no sysreset ### ERROR ### Please RESET the board ### Replace bootph- props with u-boot,dm- props to fix this. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-15Merge branch 'master' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-coldfire
2023-03-15Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
Per Andre: [T]hese two patches containing just devicetree updates for Allwinner boards. I was still hoping for a review, since we cannot import the files from the Linux tree verbatim, but managed to write some filter script that convinced me that the changes are fine. The files are from Linux v6.2-rc2, but are identical to the v6.2 release.
2023-03-15board: m5253demo: remove floating point flash size calculationAngelo Dureghello
This board is using floating point arithmetic to display the SST39VF6401B flash size. This actually generates errors with toolchains without appropriate sw fp math functions available. SST39VF6401B is the only flash for wich the size is displayed, it's size is 8192KB and floating point calculation seems not needed. Removing it. Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-03-15m68k: add private libgcc ashrdi3Angelo Dureghello
Add ashrdi3.c to private libgcc. Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-03-15board: amcore: fix config options namespaceAngelo Dureghello
Remove CONFIG_ namespace options from .h, moving them to defconfig, while changing non-defconfig options to CFG_ namespace. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15m68k: rename CONFIG_MCFTMR to CFG_MCFTMRAngelo Dureghello
This is not a Kconfig option so changing to _CFG. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15m68k: dts: stmark2: set correct compatible field for spi norAngelo Dureghello
Fix error: Invalid chip select 0:1 (err=-19) update spi nor "compatible" property with "jedec,spi-nor" to have spi nor properly bound as a child device. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15arch: enable private libgcc for m68kAngelo Dureghello
This patch fixes u-boot hanging on the first printf("%x", val). Some toolchains built without multilib enabled may produce u-boot freezing on first u64 shift operation, as in lib/vsprintf.c number() function. Using our private libgcc solves the issue. Setting private libgcc enabled at architecture level to avoid similar issues, it should not harm. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15board: stmark2: fix clock valueAngelo Dureghello
Fix totally blank console at boot, clock value must be decimal, as for the 30Mhz external crystal. Fixes: 26e5944ec90c ("stmark2: Migrate CONFIG_SYS_EXTRA_OPTIONS to Kconfig") Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-03-15m68k: add global variable sdhc_per_clk for m68kAngelo Dureghello
The FSL eSDHC controller supports two reference clocks. They are platform clock and periperhal clock. The global variable sdhc_clk has already been used for platform clock. ColdFire also uses eSHDC controller, as in arm and powerpc, so adding sdhc_per_clk to arch_global_data. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15m68k: use longword-based jumpsAngelo Dureghello
Increasing of binary size requires longword-based jumps. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2023-03-15board: amcore: fix u-boot mtd partitionAngelo Dureghello
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-03-13Prepare v2023.04-rc4v2023.04-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-13Merge tag 'efi-2023-04-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-04-rc4 Documentation: * man-page for panic command UEFI: * Correct parameter check for SetVariable() Other: * Provide unit test for crc8
2023-03-13efi_loader: describe term_get_char()Heinrich Schuchardt
Add a function description. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-03-13efi_loader: update SetVariable attribute checkMasahisa Kojima
UEFI specification v2.10 says that EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS is deprecated and EFI_UNSUPPORTED should be returned in SetVariable variable service. Current implementation returns EFI_INVALID_PARAMETER, let's fix the return value. Together with above change, this commit also updates the SetVariable attribute check to be aligned with the EDK2 reference implementation. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-03-13doc: man-page for panic commandHeinrich Schuchardt
Provide a man-page for the panic command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-13doc: uefi: fix linksVincent Stehlé
Fix a couple of links so that they are rendered correctly with sphinx. Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-03-13test: unit test for crc8Heinrich Schuchardt
Add a unit test for the crc8() function. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-10Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
Two minimal Kconfig/Makefile fixes for USB.
2023-03-10Merge https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
Assorted Renesas fixes below, namely MMC clocking breakage fix, clock Kconfig fix, pin control unused symbols removal, and sysinfo fix and enablement on now fixed platforms.
2023-03-10Merge tag 'dm-pull-10mar23' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm fixes and tests for the fdt command
2023-03-10ARM: dts: renesas: Enable sysinfo on R-Car D3 DraakTam Nguyen
Enable support for sysinfo on R-Car D3 Draak board. The sysinfo is used e.g. to access and decode board-specific information and then in turn used by board-info to print those information. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Drop compatible from I2C node, this is in r8a77995.dtsi already. Drop status = "okay" from EEPROM node. Add dts: tag. Fix Kconfig EEPROM address to be 0x50 and match the DT, sync config.]
2023-03-10ARM: dts: renesas: Enable sysinfo on R-Car V3H Condor/Condor-ITam Nguyen
Add new sysinfo IDs for R-Car V3H Condor/Condor-I . Enable support for sysinfo on R-Car V3H Condor/Condor-I. The sysinfo is used e.g. to access and decode board-specific information and then in turn used by board-info to print those information. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Drop compatible from I2C node, this is in r8a77980.dtsi already. Drop status = "okay" from EEPROM node. Add dts: tag. Update the commit message, note the new sysinfo IDs. Fix Kconfig EEPROM address to be 0x50 and match the DT, sync config.]
2023-03-10sysinfo: rcar3: Fix Draak and Eagle board codeTam Nguyen
Correct the board code ID based on the hardware documentation Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10pinctrl: renesas: Drop non-existent PFC info table entriesMarek Vasut
Remove PFC info table entries which are never instantiated, since there are no drivers for those. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10clk: renesas: Always select DM_RESET to prevent inobvious failure of ↵Marek Vasut
rst_gen3 subdriver The CLK_RCAR_GEN3 registers two subdrivers, clk_gen3 and rst_gen3. The former depends on the clock framework, which is always enabled in this context of clock framework driver, while the later depends on reset framework which may not always be enabled. Ensure the reset framework is also always enabled to prevent inobvious early boot time bind failure of the CPG driver, which leads to system showing no activity and is difficult to debug. Note that one possible approach to debug this is to use CONFIG_DEBUG_UART and add debug printascii()s into the drivers/clk/renesas/clk-rcar-gen3.c . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10mmc: renesas-sdhi: Add proper probe error fail pathMarek Vasut
In case one of the calls in probe fail, trigger a fail path and undo all the steps done in probe until the point of failure. The current implementation failed to stop controller clock and free claimed clock, so fix that. Furthermore, print return code in error prints for easier debugging. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10mmc: renesas-sdhi: Always configure default SDnH clock rate to 800 MHzMarek Vasut
The prior stage bootloader might have left the SDnCKCR register in completely arbitrary state before passing control to U-Boot, which includes the register being populated with incorrect values. Currently the SDHI driver will attempt to use clock framework to configure SDn clock, which may fail in case SDnCKCR contains invalid values for the SDnH clock, because the clock framework would not be able to determine SDnH clock rate and would get -EINVAL instead, which in turn would not allow the clock framework to determine the correct SDn clock divider ratio. This failure occurs specifically in case SDnCKCR reads back 0x209 . Correct the problem by first setting default SDnH clock rate to 800 MHz, thus assuring the SDnCKCR SDnH bits are correct, and only afterward set up the SDn clock rate to default 200 MHz. Note that the SDHI driver may reconfigure SDnH clock later based on IOS settings obtained from the attached card, the 800 MHz set up here is only the default value. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-10usb: move CONFIG_USB_HUB_DEBOUNCE_TIMEOUT to USBHeinrich Schuchardt
This configuration setting is only relevant if the board supports USB. It should not be in the main menu but in the USB menu. The setting is only relevant in USB host mode. Fixes: 5454dea3137d ("usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-03-10usb: USB hubs require host modeHeinrich Schuchardt
USB hubs run in host mode not in gadget mode. Hence, compiling usb_hub.c should not be selected by CONFIG_USB_GADGET. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-03-09test: cmd: fdt: Test fdt bootcpuMarek Vasut
Add 'fdt bootcpu' test which works as follows: - Create basic FDT, map it to sysmem - Print the FDT bootcpu - Set the FDT bootcpu and read the value back using 'fdt header get' - Perform the previous step twice to validate bootcpu overwrite The test case can be triggered using: " ./u-boot -Dc 'ut fdt' " To dump the full output from commands used during test, add '-v' flag. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09test: cmd: fdt: Test fdt rmMarek Vasut
Add 'fdt rm' test which works as follows: - Create fuller FDT, map it to sysmem - Selectively delete nodes or properties by both path and aliases - Verify created nodes or properties using fdt print command The test case can be triggered using: " ./u-boot -Dc 'ut fdt' " To dump the full output from commands used during test, add '-v' flag. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09test: cmd: fdt: Test fdt mknodeMarek Vasut
Add 'fdt mknode' test which works as follows: - Create fuller FDT, map it to sysmem - Create node either in / or subnode - Attempt to create node over existing node, which fails - Attempt to create subnodes in non-existing nodes or aliases - Verify created nodes using fdt list command The test case can be triggered using: " ./u-boot -Dc 'ut fdt' " To dump the full output from commands used during test, add '-v' flag. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09test: cmd: fdt: Test fdt setMarek Vasut
Add 'fdt set' test which works as follows: - Create fuller FDT, map it to sysmem - Set either existing property to overwrite it, or new property - Test setting both single properties as well as string and integer arrays - Test setting to non-existent nodes and aliases - Verify set values using 'fdt get value' The test case can be triggered using: " ./u-boot -Dc 'ut fdt' " To dump the full output from commands used during test, add '-v' flag. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09test: cmd: fdt: Test fdt get sizeMarek Vasut
Add 'fdt get size' test which works as follows: - Create fuller FDT, map it to sysmem - Get size of various properties - Get node count of available nodes - Test non-existent nodes and properties The test case can be triggered using: " ./u-boot -Dc 'ut fdt' " To dump the full output from commands used during test, add '-v' flag. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09test: cmd: fdt: Test fdt get addrMarek Vasut
Add 'fdt get addr' test which works as follows: - Create fuller FDT, map it to sysmem - Get address of various properties - Compare addresses calculated by UT and fdt command This test is special in that it has to go through gruesome remapping scheme where the test calculates: - pointer offsets of the generated FDT root and the property being tested - map_sysmem() result of environment variable "fdtaddr" and the one set by the test matching address of property being tested - difference between the later and the former, to obtain offset of the DT property from start of DT The offsets must match in both the UT and the tested U-Boot, if they do not, the test fails. The test case can be triggered using: " ./u-boot -Dc 'ut fdt' " To dump the full output from commands used during test, add '-v' flag. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09test: cmd: fdt: Test fdt get nameMarek Vasut
Add 'fdt get name' test which works as follows: - Create fuller FDT, map it to sysmem - Get name of / node 0, 1 and /clk-test node 0 - Compare output and validate the node name - Get name of / node 2 and /clk-test node 1 - Compare output and validate the node is not present - Get name of / node -1 and /clk-test node -1 - Compare output and validate the node name equals node 0 name - Check nonexistent node, verify the command errors out The test case can be triggered using: " ./u-boot -Dc 'ut fdt' " To dump the full output from commands used during test, add '-v' flag. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09test: cmd: fdt: Test fdt resizeMarek Vasut
Add 'fdt resize' test which works as follows: - Create simple FDT with extra size 0, map it to sysmem - 'resize' the FDT by 0x2000 bytes - Verify the new space has been added to the FDT The test case can be triggered using: " ./u-boot -Dc 'ut fdt' " To dump the full output from commands used during test, add '-v' flag. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 20:16:21 +0000