summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-08arm: dts: Add k3-am625-beagleplayRobert Nelson
BeagleBoard.org BeaglePlay is an easy to use, affordable open source hardware single board computer based on the Texas Instruments AM625 SoC that allows you to create connected devices that work even at long distances using IEEE 802.15.4g LR-WPAN and IEEE 802.3cg 10Base-T1L. Expansion is provided over open standards based mikroBUS, Grove and QWIIC headers among other interfaces. This board family can be identified by the 24c32 eeprom: [aa 55 33 ee 01 37 00 10 2e 00 42 45 41 47 4c 45 |.U3..7....BEAGLE|] [50 4c 41 59 2d 41 30 2d 00 00 30 32 30 30 37 38 |PLAY-A0-..020078|] https://beagleplay.org/ https://git.beagleboard.org/beagleplay/beagleplay baseline of base device tree is v6.5-rc1. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Co-developed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08arm: dts: k3-am625-sk-binman: Add labels for unsigned binaryNishanth Menon
Add labels for unsigned binary to permit over-ride. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08configs: am62x_evm_a53_defconfig: Disable semi-functional PSCI reset supportJan Kiszka
At this point, system shutdown is not supported by the DM firmware that TF-A calls. As we can't de-select only this feature[1], declare complete PSCI reset support as non-functional so that we don't signal incomplete support to the OS via EFI runtime services. This makes power-off under Linux work again when booting via EFI. [1] https://uefi.org/specs/UEFI/2.9_A/08_Services_Runtime_Services.html?highlight=efiresetshutdown#resetsystem Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08arm: mach-k3: am625: Add support for UDA FSNishanth Menon
While boot partition support with EMMC boot is useful, it is constrained by the size of boot hardware partition itself. In the case of K3 devices, tispl images can contain OP-TEE images that can substantially vary in size and the u-boot image itself can vary over time as we enable various features. So use the CSD information in the case of EMMC_BOOT configuration being enabled to pick boot partition or UDA FS mode operation to pick. If EMMC_BOOT is disabled, then depend on filesystem configuration to pick data from UDA. While at this, drop the extraneous whitespace. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08configs: am62x_evm*: Enable EMMC_BOOT configurationNishanth Menon
Enable EMMC boot support for AM62x evm base configuration. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08arm: mach-k3: am625_init: Convert rtc_erratumi2327_init to staticNishanth Menon
The erratum is called locally, make it static, drop the #ifdeffery since it will only be called in R5 build and mark it potentially unused to stop compiler screaming at us. While at this, drop the redundant return for a void function. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08arm: mach-k3: am625_init: Use IS_ENABLED()Nishanth Menon
Drop the #ifdeffery and use IS_ENABLED() inline check and let the compiler do it's thing. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08board: ti: am62x: am62x.env: Use default findfdtNishanth Menon
Use the default findfdt using CONFIG_DEFAULT_DEVICE_TREE Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08include: env: ti: Add a generic default_findfdt.envNishanth Menon
ti_mmc bootmethod uses a findfdt routine that is expected to be implemented by all platforms. Define a default findfdt based on configured DEFAULT_DEVICE_TREE option for u-boot. This saves duplication across multiple boards and handles architecture folder location changes centrally. TI ARMV7 platforms will need to override default_device_tree_subarch in the env file to point to the appropriate platform. Note: default "omap" is used to cater to "most common" default. Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08include: env: ti: ti_armv7_common.env: Rename to ti_common.envNishanth Menon
ti_armv7_common does not make any more sense as it is used by armv7 and armv8 TI based platforms. Reported-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08include: configs: am62x_evm: Drop distro_bootcmd usageNishanth Menon
Now that BOOTSTD is used by default, drop un-used header file inclusion. Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08configs: am62x_evm_a53_defconfig: Switch to bootstdNishanth Menon
Switch to using bootstd. Note with this change, we will stop using distro_bootcmd and instead depend entirely on bootflow method of starting the system up. Suggested-by: Tom Rini <trini@konsulko.com> Suggested-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08board: ti: am62x: am62x.env: Add explicit boot_targetsNishanth Menon
Add explicit boot_targets to indicate the specific boot sequence to follow. NOTE: The non-standard ti_mmc emulates what is done for distro_boot. With bootstd, this will eventually need to be replaced by equivalent class. Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08include: configs: am62x_evm: Wrap distroboot with CONFIG_DISTRO_DEFAULTSNishanth Menon
Wrap the distro_boot options with CONFIG_DISTRO_DEFAULTS. This is an intermediate step for us to switch over to CONFIG_BOOTSTD_DEFAULTS and drop this section in follow on patches. Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08include: configs: am62x_evm: Drop unused SDRAM addressNishanth Menon
Drop unused macro. This was meant for a second region of DDR which we do not need for AM62x evm configurations. Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08include: configs: ti_armv7_common: Add documentation for protected sectionNishanth Menon
Make the section protected by CONFIG_DISTRO_DEFAULTS macro clear. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08include: env: ti: mmc: envboot: Only attempt boot.scr if BOOTSTD is not enabledNishanth Menon
'script' bootmethod that should be used with CONFIG_BOOTSTD. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08include: env: ti: mmc: envboot/mmcboot: Check result of mmc dev before ↵Nishanth Menon
proceeding If mmc dev reports that the device is not present, there is no point in proceeding further to attempt to load the files. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08board: verdin-am62: fix check for minimum memory sizeEmanuele Ghidoli
verdin am62 SKUs comes in multiple memory configuration, check that the detected memory is at least 512MB since we have some reserved memory just before this threshold and therefore the module cannot work with less memory. Fixes: 7d1a10659f5b ("board: toradex: add verdin am62 support") Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2023-09-08verdin-am62: add u-boot update wrappersEmanuele Ghidoli
Add update_tiboot3, update_tispl and update_uboot wrappers to update R5 SPL, A53 SPL and A53 U-boot respectively. Usage example: > tftpboot ${loadaddr} tiboot3-am62x-gp-verdin.bin > run update_tiboot3 > tftpboot ${loadaddr} tispl.bin > run update_tispl > tftpboot ${loadaddr} u-boot.img > run update_uboot Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2023-09-06Merge branch '2023-09-06-assorted-CI-updates' into nextTom Rini
- Merge in a number of changes for CI. The biggest ones of note are that we now support sandbox64 in CI, and Azure has been reworked to generally have more consistent overall runtime for the pipeline.
2023-09-06Azure: Add sandbox64 to CITom Rini
Now that sandbox64 can run and pass the regular test.py suite, add it here as well. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-06.gitlab-ci: Test sandbox64 board in addition to sandboxMarek Vasut
Test both 32bit and 64bit sandbox boards in CI. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-09-06Azure: Split sandbox and qemu test.py runsTom Rini
Currently, most sandbox runs take a long time (due to running so many tests) while QEMu based test.py runs are fairly short. Split the pipeline here so that we get more consistent average run times. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-06Azure: Rework test_py job to publish its wrapper scriptTom Rini
Both to aide in debugging of any test.py issues as well as to make it easier to split the current matrix in two, have a new job that creates and publishes the current wrapper script we use for test.py jobs. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-06CI: Drop some jobs we didn't really utilizeTom Rini
- We have added more TODO/etc comments since this task was created and never focused on removing them. - The output of sloccount isn't preserved or looked at, and if desired should be in the release stats pages instead somehow. - The results of cppcheck aren't investigated and require modeling work to be useful to start with. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-06CI: Combine tools-only and envtools jobsTom Rini
These jobs are to confirm specific build targets, on a Linux host. We can safely combine these two build tests, with a make mrproper in between. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-06Azure: Rework build the world jobsTom Rini
Now that we have 3600 minutes per build job, condense and rework things such that our overall time largely doesn't change, but we can also largely avoid having to re-tweak this job to avoid timeouts. Given that we have 10 threads, we also move a few of the specific sandbox test builds to a prior stage. Note that while sandbox builds with address sanitization enabled (ASAN) not all tests pass, so we limit ourselves to just checking that the version test passes for now. Link: https://learn.microsoft.com/en-us/azure/devops/pipelines/process/phases?view=azure-devops&tabs=yaml#timeouts Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-06test: print: Fix hexdump test on 64bit systemsMarek Vasut
Use the following regex to make this test compatible with both 32bit and 64bit systems. The trick is to use %0*lx format string for the address prefix in the test. " s@\(ut_assert_nextline("\)0\+\([^:]\+\)\(:.*"\)\();\)@\1%0*lx\3, IS_ENABLED(CONFIG_PHYS_64BIT) ? 16 : 8, 0x\2UL\4 " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-06test: dm: test-fdt: Use fdtdec_get_int() in dm_check_devices()Marek Vasut
The current fdtdec_get_addr() takes into consideration #address-cells and #size-cells for "ping-expect" property which is clearly neither. Use fdtdec_get_int() instead and return negative one in case the property is not in DT or the platform under test is not DT based, i.e. mimic the current fdtdec_get_addr() behavior. This fixes ut dm dm_test_bus_children test. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-06configs: sandbox64: Enable legacy image format supportMarek Vasut
Align the sandbox64 defconfig with sandbox defconfig. Enable missing legacy image format support. This fixes ut_bootstd_bootflow_cmd_menu test. Suggested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-06Merge branch 'next' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-coldfire into next - Relocation support
2023-09-06Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-usb ↵Tom Rini
into next
2023-09-06Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini
into next - rmobile cleanup
2023-09-06ARM: rmobile: Clean up rmobile_cpuinfo_idx()Marek Vasut
Clean the function up a bit further. Return immediately on match and return ARRAY_SIZE() - 1 on failure. Add proper comment in that case. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2023-09-06Merge branch '2023-09-06-riscv-fixes' into nextTom Rini
- Merge two patches to fix the issues with risc-v building on next after the merge of v2023.10-rc4 to next.
2023-09-06riscv: Correct event usage for riscv_cpu_probe/setupTom Rini
With having both an EVENT_SPY_SIMPLE setup for both riscv_cpu_probe and riscv_cpu_setup we do not need the latter function to call the former function as it will already have been done in time. Fixes: 1c55d62fb9cc ("riscv: cpu: make riscv_cpu_probe to EVT_DM_POST_INIT_R callback") Tested-by: Milan P. Stanić <mps@arvanta.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-06riscv: Rework riscv_cpu_probe for current event macrosTom Rini
This function should now be a EVENT_SPY_SIMPLE call, update it. Tested-by: Milan P. Stanić <mps@arvanta.net> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-06arch: m68k: Implement relocationMarek Vasut
Implement relocation for M68K. Perform all the updates in start.S relocate_code in assemby, since it is a simple matter of traversing the dynsym table and adding relocation offset - MONITOR_BASE to all the items in that table. The necessity to deal with MONITOR_BASE is a specific of M68K, where the ELF entry point is at offset 0x400, which is the MONITOR_BASE, while TEXT_BASE is at offset 0 . This also removes the one last user of NEEDS_MANUAL_RELOC, so that could be finally cleaned up . Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-06tools: relocate-rela: Add M68K supportMarek Vasut
Add M68K ELF32 support into this tool, so it can patch static rela into M68K u-boot-nodtb.bin . This is the first step toward M68K relocation support, and in turn, removal of NEEDS_MANUAL_RELOC from the codebase altogether. Tested-by: Michal Simek <michal.simek@amd.com> # microblaze, arm64 Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-06tools: relocate-rela: Fix BE symtab handlingMarek Vasut
The symtab contains data in target endianness, convert the data to native endianness before doing any operations and on them, and back to target endianness before updating the bin file. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Tested-by: Michal Simek <michal.simek@amd.com> # microblaze, arm64 Reviewed-by: Angelo Dureghello <angelo@kernel-space.org>
2023-09-04usb: host: ohci-generic: Make usage of clock/reset bulk() APIFabrice Gasnier
Make usage of clock and reset bulk API in order to simplify the code Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
2023-09-04usb: check for companion controller in uclassFabrice Gasnier
EHCI is usually used with companion controller (like OHCI) as companion controller. This information on the companion is missing currently in companion drivers. So, if the usb-uclass isn't aware, it may scan busses in any order: OHCI first, then EHCI. This is seen on STM32MP1 where DT probing makes the probe order to occur by increasing address (OHCI address < EHCI address). When a low speed or full-speed device is plugged in, it's not detected as EHCI should first detect it, and give ownership (handover) to OHCI. Current situation on STM32MP1 (with a low speed device plugged-in) STM32MP> usb start starting USB... Bus usb@5800c000: USB OHCI 1.0 Bus usb@5800d000: USB EHCI 1.00 scanning bus usb@5800c000 for devices... 1 USB Device(s) found scanning bus usb@5800d000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found The "companion" property in the device tree allow to retrieve companion controller information, from the EHCI node. This allow marking the companion driver as such. With this patch (same low speed device plugged in): STM32MP> usb start starting USB... Bus usb@5800c000: USB OHCI 1.0 Bus usb@5800d000: USB EHCI 1.00 scanning bus usb@5800d000 for devices... 1 USB Device(s) found scanning bus usb@5800c000 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found STM32MP> usb tree USB device tree: 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) HP HP USB 1000dpi Laser Mouse 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller This also optimize bus scan when a High speed device is plugged in, as the usb-uclass skips OHCI in this case: STM32MP> usb reset resetting USB... Bus usb@5800c000: USB OHCI 1.0 Bus usb@5800d000: USB EHCI 1.00 scanning bus usb@5800d000 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found STM32MP> usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Mass Storage (480 Mb/s, 200mA) SanDisk Cruzer Blade 03003432021922011407 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-09-04event.h: Documented some newly added portions betterTom Rini
After the merge of v2023.10-rc4 to next include/event.h needs to be fully documented in order for documentation builds to complete. Rewords two of the event_t descriptions to be docbook style and better match the rest of this enum. Fix two typos (flag->flags) in other comments. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-04Merge tag 'v2023.10-rc4' into nextTom Rini
Prepare v2023.10-rc4
2023-09-04Prepare v2023.10-rc4v2023.10-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-04Merge tag 'rpi-2023.10' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi Updates for RPi for 2023.10: - rpi: Disable DISTRO_DEFAULTS - arm: rpi: Switch to standard boot - arm: rpi: Switch to a text environment
2023-09-03arm: rpi: Switch to a text environmentSimon Glass
Use the new environment format so we can drop most of the config.h file. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03rpi: Disable DISTRO_DEFAULTSSimon Glass
Disable this option to reclaim some space, since bootstd requires less functionality to operate (e.g. hush parser). Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03arm: rpi: Switch to standard bootSimon Glass
Drop use of the distro scripts and use standard boot instead. We don't need to specify the mmc devices individually, since they are used in order from 0 to 2, and standard boot uses that order anyway. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-02 18:28:45 +0000