summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-05firmware: firmware-zynqmp: Add zynqmp_pm_set_gem_config apiT Karthik Reddy
Add zynqmp_pm_set_gem_config() api to configure GEM secure registers. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f69e32355c6a6be7d2780663353c52757530207d.1648631275.git.michal.simek@xilinx.com
2022-04-05gpio: slg7xl45106: Update gpio desc flags from DTT Karthik Reddy
In current slg7xl45106 gpio driver xlate() function we are not updating gpio flags from DT. Read the given flag from DT and update the gpio desc flags variable with required gpio direction state. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/a8d7b4799337bd99f61ace509889f02b192a9414.1648631275.git.michal.simek@xilinx.com
2022-04-05net: zynq_gem: Move ethernet info print statementT Karthik Reddy
As we are not reading the PHY address in case of CONFIG_ETH_PHY in plat function, phy address always prints as -1. So move the ethernet info print statement to probe function, to display proper phy address. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f6efc6719d767b1bebe65987c22c6d52329f4225.1648631275.git.michal.simek@xilinx.com
2022-04-05net: phy: Avoid phy gpio reset sequence if DM_ETH_PHY is enabledT Karthik Reddy
If DM_ETH_PHY config is enabled PHY gpio reset is taken care by the eth-phy-uclass driver, so use the PHY gpio reset functionality from ethernet_id file when this config is disabled to reset the PHY. Use debug() print instead of dev_err() to avoid warning incase if phy-id compatible string is not present. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/4d0fd3f9f886c1d943776025e5efb5438b0eb389.1648631275.git.michal.simek@xilinx.com
2022-04-05net: zynq_gem: Use shared MDIO bus support for zynqmpMichal Simek
CONFIG_ETH_PHY enables support to utilize generic ethernet phy framework. Though if ethernet PHY node is in other ethernet node, it will use shared MDIO to access the PHY of other ethernet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Link: https://lore.kernel.org/r/337b1a38ba36cde1951739af62fb3d2736d97f53.1648631275.git.michal.simek@xilinx.com
2022-04-05dt-bindings: xilinx: Add missing ids for PDMichal Simek
There are some new power domain IDs which are used in Linux kernel that's why add them here too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/e6092e1d3766c0ac11bf620820739c93ab677a85.1648626981.git.michal.simek@xilinx.com
2022-04-05arm64: zynqmp: Record ID code for XCZU1EG deviceMichal Simek
Add ID code for 1eg device. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/5b6c9f6a25bba076f304bc4699f6f676a929a683.1648619516.git.michal.simek@xilinx.com
2022-04-05net: phy: Fix rgmii-id phy reset timeout issueT Karthik Reddy
While creating a phy device using phy_device_create(), we need to provide a valid phyaddr instead of 0 causing phy address being registered as 0 with mdio bus and shows mdio phy list as below ZynqMP> mdio list eth0: 0 - TI DP83867 <--> ethernet@ff0b0000 eth1: 0 - TI DP83867 <--> ethernet@ff0c0000 Also PHY soft reset is being requested on 0 instead of valid address causing "PHY reset timed out" error. So add phyaddr argument to phy_connect_phy_id() and to its prototype to create phy device with valid phyaddress. Fixes: a744a284e354 ("net: phy: Add support for ethernet-phy-id with gpio reset") Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Link: https://lore.kernel.org/r/fe35fddb9faa5af577ffdfabaec6879c935a30f8.1648562755.git.michal.simek@xilinx.com
2022-04-05clk: zynqmp: Add support for for DP audio/video clocksMichal Simek
Add support for getting rate for DP audio and video clocks. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8792efe1fd9715f7c8a2e1e24f0454fb5b25d833.1648552434.git.michal.simek@xilinx.com
2022-04-05xilinx: Increase max size of image from 60 to 100MBMichal Simek
Recently big Linux kernels can have more then 60MB that's why increase this limit to also cover these large kernels. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f52f7c8ea419d69b248ba1460a96d1635194e128.1648551279.git.michal.simek@xilinx.com
2022-03-30arm: zynqmp: Enable PWM command and cadence ttc pwm driverMichal Simek
Enable PWM ttc driver and command in generic image. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/a660c8f2010f4f07534753e0ac44a34b8ff0d3c3.1634303847.git.michal.simek@xilinx.com
2022-03-30pwm: Add driver for cadence TTCMichal Simek
TTC has three modes of operations. Timer, PWM and input counters. There is already driver for timer under CADENCE_TTC_TIMER which is used for ZynqMP R5 configuration. This driver is targeting PWM which is for example configuration which can be used for fan control. The driver has been tested on Xilinx Kria SOM platform where fan is connected to one PL pin. When TTC output is connected via EMIO to PL pin TTC pwm can be configured and tested for example like this: pwm config 0 0 10000 1200 pwm enable 0 0 pwm config 0 0 10000 1400 pwm config 0 0 10000 1600 Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/915a662ddb88f7a958ca1f307e8fea59af9d7feb.1634303847.git.michal.simek@xilinx.com
2022-03-30timer: cadence: Add bind function to driverMichal Simek
When DT node has pwm-cells property it shouldn't be bind as timer driver but as PWM driver. That's why make sure that this property is checked. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/434ef195fbedea9f83672a12d1ace0da16e8832e.1634303847.git.michal.simek@xilinx.com
2022-03-29mmc: zynq_sdhci: Fix SDx_BASECLK configurationAshok Reddy Soma
The DLL mode supported SD reference clocks are 50 MHz, 100 MHz and 200 MHz. When user select SD frequency as 200MHz in the design, the actual frequency is going to come around ~187MHz (<= 200MHz considering the parent clock and divisor selection). We need to set SDx_BASECLK as 200 in this case, setting 187 will result in tuning failures in mmc. Set SDx_BASECLK to exact value of 200, 100 or 50 based on the frequency range. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/6c1e5eeeedd2864a0c85e6b409d182031d8c6c1a.1648210268.git.michal.simek@xilinx.com
2022-03-29serial: zynq: Change fifo behavior in debug modeMichal Simek
Serial IP has output buffer which status is indicated by two bits. If fifo if empty or full. Default configuration is that chars are pushed to fifo till it is full. Time to time it is visible that chars are scambled and logs are not visible. Not sure what it is exactly happening but all the time it helps to change driver behavior to write only one char at a time. That's why enable this mode when debug uart is enabled not to see scrambled chars in debug by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/332b2106d7a8190dd1001b5387f8bd1fba2e061b.1648205405.git.michal.simek@xilinx.com
2022-03-29arm64: zynqmp: Remove low level UART setting contMichal Simek
There is no reason to do serial initialization. Uart driver does it already based on DT. Good effect is that it is clear which interface is console. The same change was done in past by commit 84d2bbf082fa ("arm64: zynqmp: Remove low level UART setting"). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/91a73f292bafc4b64ed09954cc23780496da4b65.1648125082.git.michal.simek@xilinx.com
2022-03-29dt-bindings: phy: Sync phy.h with Linux kernelMichal Simek
Make sure that both files are in sync to have the same values in DTs. The patch is fixing SPDX license as is used in the kernel and adding new values for PHY_TYPE_DPHY and PHY_TYPE_CPHY. SPDX license change was done by: Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de and new value added by: Link: https://lore.kernel.org/r/20210617144349.28448-3-jonathan@marek.ca Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/06dbc03d4c9ac5d621341d8fb8cc16f489062b39.1648113469.git.michal.simek@xilinx.com
2022-03-29arm64: versal: Do not place u-boot to reserved memory locationMichal Simek
Versal can also have reserved space in DT which u-boot has to avoid to placing self to that location. The same change was done in ZynqMP by commit ce39ee28ec31 ("zynqmp: Do not place u-boot to reserved memory location") and also for microblaze by commit d7b5cc89d329 ("microblaze: Do not place u-boot to reserved memory location"). The patch was tested by adding reserved-memory node to DT and check via bdinfo back. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/15426fa6d64835dd23c5c8c12bbfc97306fb6098.1647527129.git.michal.simek@xilinx.com
2022-03-29firmware: zynqmp: Do not bind PD driver in SPL if disabledMichal Simek
Change if condition to cover SPL flow. SPL needs to have CONFIG_SPL_POWER_DOMAIN enabled to be able to bind CONFIG_ZYNQMP_POWER_DOMAIN driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8e1d381013a0ce39d736da166d2b401c4b12d38a.1646064792.git.michal.simek@xilinx.com
2022-03-29arm64: zynqmp: Add resets property to sdhci nodesSai Krishna Potthuri
Add "resets" property to sdhci nodes. resets property is used to reset the SD host controller when dynamic configuration support is enabled. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f1fe39259c45a37aae56c2835ee8ba187c889d25.1646060367.git.michal.simek@xilinx.com
2022-03-28Merge tag 'next-20220328' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video into next - drop old CFB code - drop CONFIG_LCD_BMP_RLE8
2022-03-28video: Drop CONFIG_LCD_BMP_RLE8Simon Glass
This is not defined by any board. Even sandbox doesn't actually use it since it has migrated to DM_VIDEO. Drop this option. Remove the dead code also, for completeness, even though the whole lcd.c file will be dropped soon. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2022-03-28video: Drop formike driverSimon Glass
This is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Convert CONFIG_VIDEO_BCM2835 to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO_BCM2835 This is the final ad-hoc CONFIG_VIDEO_... to convert. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com>
2022-03-28video: mxs: Drop old video codeSimon Glass
This is no-longer used and is the last reference to video_hw_init(). Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop FSL DIU driverSimon Glass
This does not use driver model and is more than two years past the migration date. Drop it. It can be added back later if needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: fsl: colibri_vf: Drop FSL DCU driverSimon Glass
This does not use driver model and is more than two years past the migration date. Drop it. It can be added back later if needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop da8xx-fbSimon Glass
This is not used in U-Boot anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Clean up the uclass headerSimon Glass
Drop the unnecessary cruft from this header and update the title. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop references to CONFIG_VIDEO et alSimon Glass
Drop the Kconfigs which are not used and all references to them. In particular, this drops CONFIG_VIDEO to avoid confusion and allow us to eventually rename CONFIG_DM_VIDEO to CONFIG_VIDEO. Also drop the prototype for video_get_info_str() which is no-longer used. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jason Liu <jason.hui.liu@nxp.com>
2022-03-28video: Drop CONFIG_VIDEO_BMP_LOGOSimon Glass
This option is not implemented anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop video_fb headerSimon Glass
This is not used now. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: nexell: Drop unused and invalid codeSimon Glass
Unfortunately this driver uses the old video structure to store things. This is not supported with driver model. Drop the old code and comment out the other pieces, so the maintainer can take a look. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: siemens: Drop unused video codeSimon Glass
Drop this old code which is not built anymore, as it depends on CONFIG_VIDEO which has been removed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop cfg_consoleSimon Glass
The non-driver model video support was removed two years ago. Drop this driver, which is only used by nokia_rx51. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28Merge tag 'v2022.04-rc5' into nextTom Rini
Prepare v2022.04-rc5
2022-03-28Prepare v2022.04-rc5v2022.04-rc5Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-28Merge branch '2022-03-28-critical-fixes'Tom Rini
- A zstd, two Apple M1 and an MXS NAND critical bugfix - Clean up another file that wasn't being removed and update some external documentation links.
2022-03-28mtd: gpmi: fix the bch setting backward compatible issueHan Xu
Previous u-boot code changed the default bch setting behavior and caused backward compatible issue. This fix choose the legacy bch geometry back again as the default option. If the minimum ecc strength that NAND chips required need to be chosen, it can be enabled by either adding DT flag "fsl,use-minimum-ecc" or CONFIG_NAND_MXS_USE_MINIMUM_ECC in configs. The unused flag "fsl,legacy-bch-geometry" get removed. Fixes: 51cdf83eea (mtd: gpmi: provide the option to use legacy bch geometry) Fixes: 616f03daba (mtd: gpmi: change the BCH layout setting for large oob NAND) Tested-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Han Xu <han.xu@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-28boot: image: fixup zstd decompression buffer initialization typoJérôme Carretero
The code was mistakenly initializing the input buffer twice. Tested to be working on BeagleBone by adjusting CONFIG_SYS_BOOTM_LEN to 64MiB (probably works with less) and preparing uImage with: cat arch/arm/boot/Image \ | zstd --ultra -22 --zstd=windowLog=22 \ > linux.bin.zst mkimage -A arm -T kernel uImage -C zstd -d linux.bin.zst \ -a 0x80008000 -e 0x80008000 Without the windowLog restriction, bootm fails with a zstd decompression error 7 (window too large), which I haven't troubleshooted. There should be a bit more documentation on the feature... Reviewed-by: Simon Glass <sjg@chromium.org> Fixes: 458b30af66c image: Update image_decomp() to avoid ifdefs
2022-03-28Fix URLs to old freescale git reposPali Rohár
Freescale git repos are now on source.codeaurora.org. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-03-28Makefile: add drivers/video/u_boot_logo.S to cleanHeinrich Schuchardt
make sandbox_defconfig make mrproper make tests fails with ../drivers/video/u_boot_logo.S: Assembler messages: ../drivers/video/u_boot_logo.S:5: Error: file not found: drivers/video/u_boot_logo.bmp We have to delete the generated file. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-28arm: apple: Fix mem layoutMark Kettenis
The current approach for setting the environment variables that describe the memory layout runs the risk of overlapping with reserved memory regions. Use the lmb code to derive the addresses for these variables instead. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-28arm: apple: Increase RTKit timeoutHector Martin
The firmware on larger NVMe drives needs more than 100ms to come up. Change the timeout to 1s. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-27Merge tag 'efi-2022-04-rc5-2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-04-rc5-2 Documentation: * man-page for the wdt command UEFI: * Unit test for boot manager
2022-03-26cmd: efidebug: simplify do_efi_boot_add()Heinrich Schuchardt
When calling efi_dp_from_name() we are not interested in the device part. Just pass NULL as an argument. Suggested-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-26test: test UEFI boot managerHeinrich Schuchardt
Provide a unit test for * efidebug boot add * efidebug boot order * bootefi bootmgr * initrd via EFI_LOAD_FILE2_PROTOCOL Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-26efi_loader: initrddump: drain input before promptHeinrich Schuchardt
Up to now the initrddump.efi application has drained the input after showing the prompt. This works for humans but leads to problems when automating testing. If the input is drained, this should be done before showing the prompt. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-03-26efi_loader: nocolor command line attr for initrddump.efiHeinrich Schuchardt
initrddump.efi uses colored output and clear the screen. This is not helpful for integration into Python tests. Allow specifying 'nocolor' in the load option data to suppress color output and clearing the screen. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 03:52:34 +0000