summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-24imx: imxrt1050-evk: Add support for SPI flash bootingJesse Taube
Add support for booting the imxrt1050-evk from spi. Add imximage config and the ability for SPL to boot from NOR. Enable binman in Kconfig and device tree for imxrt* as it is used to prepend fspi_header.bin to SPL and u-boot.img. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2024-02-23Merge tag 'u-boot-amlogic-fixes-20240223' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - fix AVB oom error for Khadas VIM3 Android configs
2024-02-23configs: khadas-vim3*_android: fix AVB oom errorMattijs Korpershoek
When booting Android with AVB enabled, an OOM is observed: => avb init ${mmcdev} => avb verify _a ## Android Verified Boot 2.0 version 1.1.0 read_is_device_unlocked not supported yet read_rollback_index not supported yet avb_util.c:182: ERROR: Failed to allocate memory. OOM error occurred during verification A custom malloc length of 128MB is required as documented in commit 285a83b12bdf ("configs: meson64_android: increase SYS_MALLOC_LEN to 128M for AVB") However, this 128M custom malloc length was not ported to Kconfig in commit 7cfbba36e9f8 ("Convert CONFIG_SYS_MALLOC_LEN to Kconfig") Add it back to fix AVB verification on VIM3/VIM3L. Fixes: 7cfbba36e9f8 ("Convert CONFIG_SYS_MALLOC_LEN to Kconfig") Co-developed-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Link: https://lore.kernel.org/r/20240209-vim3-avb-malloc-v1-1-91427d8c19ab@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-02-22Merge branch 'qcom-fixes-2024.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon - Two fixes for the qcom-pmic button driver
2024-02-20Merge patch series "board/ti: k3 boards: Stop using findfdt"Tom Rini
Nishanth Menon <nm@ti.com> says: This is a wide cleanup to switch to setting fdtfile using env_set instead of scripted magic. 'fdtfile' is expected to be set by default. This allows the stdboot triggered efi loaders to find the correct OS device tree file even if regular boot process is interrupted by user intervention.
2024-02-20include: env: ti: Drop default_findfdtNishanth Menon
We shouldn't need finfdt anymore. Drop the env script. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: beagle: beagleplay: Set fdtfile from C code instead of findfdt scriptNishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt scriptNishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: j721s2: Set fdtfile from C code instead of findfdt scriptNishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work". While at this, replace findfdt in environment with a warning as it is no longer needed. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: j721e: Set fdtfile from C code instead of findfdt scriptNishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work". While at this, replace findfdt in environment with a warning as it is no longer needed. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: am65x: Set fdtfile from C code instead of findfdt scriptNishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work". While at this, replace findfdt in environment with a warning as it is no longer needed. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: am64x: Set fdtfile from C code instead of findfdt scriptNishanth Menon
We now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work". While at this, replace findfdt in environment with a warning as it is no longer needed. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: am62x: Set fdtfile from C code instead of findfdt scriptNishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code. While at this, replace findfdt in environment with a warning as it is no longer needed Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: am62ax: Set fdtfile from C code instead of findfdt scriptNishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code. While at this, replace findfdt in environment with a warning as it is no longer needed Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: common: Introduce a common fdt ops libraryNishanth Menon
Introduce a common fdt operations library for basic device tree operations that are common between various boards. The first library to introduce here is the capability to set up fdtfile as a standard variable as part of board identification rather than depend on scripted ifdeffery. Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20board: ti: Add missing common/Kconfig referencesNishanth Menon
Add missing board/ti/common/Kconfig references for the platforms that missed it. The intent is for the common Kconfig to be usable across TI reference boards as required. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
2024-02-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-samsungTom Rini
2024-02-19usb: ehci-mx6: Add i.MX93 supportMathieu Othacehe
i.MX93 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 driver. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2024-02-19common: usb-hub: Reset USB 3.0 hubs onlyShantur Rathore
Additional testing of the changes introduced in commit 33e06dcbe57a "common: usb-hub: Reset hub port before scanning") revealed that some USB 2.0 and 3.0 flash drives didn't work in U-Boot on some Allwinner SoCs that support USB 2.0 interfaces only. More precisely, some of the tested USB 2.0 and 3.0 flash drives failed to be detected and work on an OrangePi Zero 3, based on the Allwinner H616 SoC that supports USB 2.0 only, while the same USB flash drives worked just fine on a Pine64 H64, based on the Allwinner H6 SoC that supports both USB 2.0 and USB 3.0 interfaces. The USB ID of the above-mentioned USB 3.0 flash drive that failed to work is 1f75:0917 (Innostor Technology Corporation IS917 Mass storage), it is 32 GB in size and sold under the PNY brand. The mentioned USB 2.0 drive is some inexpensive no-name drive with an invalid USB ID. Resetting USB 3.0 hubs only, which this patch introduces to the USB hub resets, has been tested to work as expected, resolving the identified issues on the Allwinner H616, while not introducing any new issues on other tested Allwinner SoCs. Thus, let's fix it that way. According to the USB 3.0 specification, resetting a USB 3.0 port is required when an attached USB device transitions between different states, such as when it resumes from suspend. Though, the Linux kernel performs additional USB 3.0 port resets upon initial USB device attachment, as visible in commit 07194ab7be63 ("USB: Reset USB 3.0 devices on (re)discovery") in the kernel source, to ensure proper state of the USB 3.0 hub port and proper USB mode negotiation during the initial USB device attachment and enumeration. These additional types of USB port resets don't exist for USB 2.0 hubs, according the USB 2.0 specification. The resets seem to be added to the USB 3.0 specification as part of the port and device mode negotiation. The Linux kernel resets USB 3.0 (i.e. SuperSpeed) hubs only, as visible in commit 10d674a82e55 ("USB: When hot reset for USB3 fails, try warm reset.") in the kernel source. The check for SuperSpeed hubs is performed in a way that also applies to newer SuperSpeed Plus (USB 3.1 or 3.2) hubs as well, which hopefully makes it future proof. Fixes: 33e06dcbe57a ("common: usb-hub: Reset hub port before scanning") Link: https://lore.kernel.org/u-boot/20240207102327.35125-1-i@shantur.com/T/#u Link: https://lore.kernel.org/u-boot/20240201164604.13315fa6@donnerap.manchester.arm.com/T/#u Signed-off-by: Shantur Rathore <i@shantur.com> Helped-by: Dragan Simic <dsimic@manjaro.org> Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Marek Vasut <marex@denx.de>
2024-02-19Merge tag 'u-boot-imx-master-20240219' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/19683 - Convert msc_sm2s_imx8mp to DM_SERIAL. - Make Ethernel functional on msc_sm2s_imx8mp. - General improvements for msc_sm2s_imx8mp. - Add suport for the Sielaff i.MX6 Solo board. - Update GE HealthCare maitainers' e-mail addresses.
2024-02-19doc: board: Add minimal documentation for Sielaff i.MX6 Solo boardFrieder Schrempf
Describe how to build and boot for the Sielaff i.MX6 Solo board. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2024-02-19board: Add support for Sielaff i.MX6 Solo boardFrieder Schrempf
The Sielaff i.MX6 Solo board is a control and HMI board for vending machines. Add support for this board. The devicetree files are taken from pending changes in the Linux kernel that are available from linux-next and will likely be part of Linux v6.9. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2024-02-19mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80BFrieder Schrempf
The datasheet can be found here: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/EN25Q80B_Ver.E.pdf Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2024-02-19MAINTAINERS: Update after GEHC spin-offIan Ray
Update our email addresses, from @ge.com to @gehealthcare.com, after GE HealthCare was spun-off from GE. Remove Antti, who no longer works on the project. Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
2024-02-19msc_sm2s_imx8mp: Fix CONFIG_DEFAULT_FDT_FILEFabio Estevam
There is no imx8mp-msc-sm2s.dtb file in upstream Linux. Change it to imx8mp-msc-sm2s-ep1.dtb. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
2024-02-19msc_sm2s_imx8mp: Add redundant environment supportFabio Estevam
Redundant environment support is required for software updates. Add support for it. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
2024-02-19imx8mp-msc-sm2s: Add mmc aliasesFabio Estevam
Add mmc alias so that the eMMC is mmc0 and the SD card is mmc1 to have a well defined device numbering scheme. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
2024-02-19msc_sm2s_imx8mp: Make Ethernet functionalFabio Estevam
Currently, the Ethernet ports are not working. The Ethernet PHY reset lines are controlled by the TCA6424 I2C GPIO expander. The TCA6424 I2C GPIO expander is supported by the CONFIG_DM_PCA953X driver. Select the CONFIG_DM_PCA953X option so that the Ethernet PHYs can go through a proper reset making Ethernet to be functional. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
2024-02-19msc_sm2s_imx8mp: Convert to DM_SERIALFabio Estevam
The conversion to DM_SERIAL is mandatory, so do the conversion. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
2024-02-17Merge branch 'master-porter' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-sh - Renesas R-Car Gen2 fixes
2024-02-17ARM: renesas: Enable LTO on R-CarMarek Vasut
Enable LTO globally on Renesas R-Car platforms. This has been enabled on a subset of boards already, but at this point it is safe to enable it globally. This saves units or tens of kiB from the resulting build. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-02-17ARM: renesas: Set R-Car Gen2 board size limit to 512 kiBMarek Vasut
The maximum size of u-boot.img on R-Car Gen2 is 0x80000 or 512 kiB, set the limit to avoid overflows as new functionality gets pulled in. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-02-17ARM: renesas: Disable EFI on R-Car Gen2Marek Vasut
These systems are unlikely to use EFI as this functionality has not been enabled until it got pulled in by Kconfig default. This functionality does add some 60-70 kiB to the u-boot.img size, which overflows the size limit. Disable it. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-02-17clk: renesas: Fix broken clocks on all Gen2 boardsNiklas Söderlund
To prepare support for multiple register layouts pointers to register tables where added to struct cpg_mssr_info. These pointers are suppose to be filled in at probe time and no intended change in behavior was intended. However the new pointers where only filled in by some paths of the driver implemented in clk-rcar-gen3.c. The path implemented in clk-rcar-gen2.c was not updated leaving the pointers uninitialized leading to a crash when trying to probe the clocks. Fix this by filling in the pointers in the Gen2 code path with the values used before they where moved to struct cpg_mssr_info. Fixes: d413214fb748 ("clk: renesas: Add register pointers into struct cpg_mssr_info") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # R8A7791 Porter Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-15Merge tag 'u-boot-dfu-20240215' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dfu u-boot-dfu-20240215 - Fix avb_verify command with SD cards - Add u-boot-dfu maintainer tree for AB/AVB - Avb: report verified boot state based on lock state - Misc avb refactors improve code quality
2024-02-15doc: android: avb: sync usage detailsIgor Opaniuk
Sync usage info with the one cmd/avb.c. Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240209192045.3961832-8-igor.opaniuk@foundries.io Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-02-15cmd: avb: rework do_avb_verify_partIgor Opaniuk
Use existing str_avb_slot_error() function for obtaining verification fail reason details. Take into account device lock state for setting correct androidboot.verifiedbootstate kernel cmdline parameter. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Link: https://lore.kernel.org/r/20240209192045.3961832-7-igor.opaniuk@foundries.io Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-02-15common: avb_verify: add str_avb_io_error/str_avb_slot_errorIgor Opaniuk
Introduce str_avb_io_error() and str_avb_slot_error() functions, that provide a pointer to AVB runtime error message. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Link: https://lore.kernel.org/r/20240209192045.3961832-6-igor.opaniuk@foundries.io Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-02-15cmd: avb: rework printsIgor Opaniuk
Simplify and add more context for prints where it's needed. Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240209192045.3961832-5-igor.opaniuk@foundries.io Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-02-15common: avb_verify: rework error/debug printsIgor Opaniuk
Make error prints more verbose with additional context. Also s/print/debug/g for prints, which might be relevant only for debugging purposes. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Link: https://lore.kernel.org/r/20240209192045.3961832-4-igor.opaniuk@foundries.io Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-02-15avb: move SPDX license identifiers to the first lineIgor Opaniuk
Move SPDX license identifiers to the first line, so it conforms to license placement rule [1]: Placement: The SPDX license identifier in kernel files shall be added at the first possible line in a file which can contain a comment. For the majority of files this is the first line, except for scripts which require the '#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX identifier goes into the second line. [1] https://www.kernel.org/doc/Documentation/process/license-rules.rst Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Link: https://lore.kernel.org/r/20240209192045.3961832-3-igor.opaniuk@foundries.io Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-02-15common: avb_verify: don't call mmc_switch_part for SDIgor Opaniuk
mmc_switch_part() is used for switching between hw partitions on eMMC (boot0, boot1, user, rpmb). There is no need to do that for SD card. This fixes the avb command usage on SD cards. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240209192045.3961832-2-igor.opaniuk@foundries.io Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-02-15MAINTAINERS: add custodian tree info for AVB/ABIgor Opaniuk
Add information about a custodian tree [1] for AVB/AB, which is maintained by Mattijs Korpershoek. [1] https://source.denx.de/u-boot/custodians/u-boot-dfu Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20240213073638.1125429-1-igor.opaniuk@foundries.io Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-02-14Merge tag 'xilinx-for-v2024.04-rc3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2024.04-rc3 zynqmp: - Cover missing _SE chip variants to fix fpga programming versal: - Enable LTO for mini configurations versal-net: - Enable LTO for mini configurations - Fix GIC address to aligned with real silicon xilinx: - DTs cleanup and fixups - Enable HTTP boot - Add missing spl header to zynqmp.c
2024-02-14button: qcom-pmic: demote "unknown button" message to debugCaleb Connolly
This message isn't an error (there can be a watchdog subnode for example) but it shouldn't be printed unless this driver is being debugged. Demote it to a debug print. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-02-14button: qcom-pmic: fix some error checkingDan Carpenter
The pmic_reg_read() function can return errors. Add a check for that. Fixes: 4e8aa0065d4b ("button: qcom-pmic: introduce Qualcomm PMIC button driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
2024-02-14arm64: versal-net: Setup correct addresses of GICR/GICDMichal Simek
Previous addresses where used in past in emulation environment but never gets to silicon that's why use correct addresses. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/5d3d0e1afb1f673ffeb4a1c5d7f040475c806a30.1707220293.git.michal.simek@amd.com
2024-02-13Prepare v2024.04-rc2v2024.04-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-02-13Merge branch '2024-02-13-assorted-updates'Tom Rini
- Add the button command patch, update MAINTAINERS entry for a platform, fix a problem with the hash command, fix a problem on K3 platforms and revert a change on verdin-am62.
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-02 21:43:50 +0000