summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-07Revert "clk: Detect failure to set defaults"Marek Vasut
This reverts commit 92f1e9a4b31c0bf0f4f61ab823a6a88657323646. The aforementioned patch causes massive breakage on all platforms which have 'assigned-clock' DT property in their DT which references any clock that are not supported by the platform clock driver. That can easily happen either in SPL, or because the clock driver is reduced. Currently it seems all iMX8M are affected and fail to boot altogether. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peng Fan <peng.fan@oss.nxp.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-07udoo: neo: Do not print the Model informationFabio Estevam
By default the Model information from DT is printed: CPU: Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 63C Reset cause: POR Model: UDOO Neo Basic Board: UDOO Neo FULL I2C: ready As the udoo basic DT is used, such output may be confusing. Improve it by only printing the Board model instead, which is read from the board identification GPIOs. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Tommaso Merciai <tomm.merciai@gmail.com> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
2022-01-07udoo: neo: Fix the board model printingFabio Estevam
Currently, the board model is not printed correctly: Board: UDOO Neo UNDEFINED Read the model type in SPL and store it the internal OCRAM, so that U-Boot proper can retrieve it correctly. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Enable support for USB and storagePeter Robinson
Enable support for USB and USB storage on the UDOO Neo. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Fix ethernetPeter Robinson
The ethernet has a RMII not RGMII, also needs DM_MDIO and finally initialise it later in the process as it's not needed that early on and not everything is ready so it locks up the device. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Fixes for booting from the mSD cardPeter Robinson
This fixes booting from the mSD card from both SPL and when using it for the OS booting. It also cleans up a few mmc booting bits that are no longer needed. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07udoo_neo: Call gpio_request()Peter Robinson
Calling gpio_request() prior to its usage is now mandatory. This fixes the following GPIO errors: gpio@20a8000: set_dir_flags: error: gpio GPIO4_16 not reserved gpio@20a8000: set_dir_flags: error: gpio GPIO4_13 not reserved gpio@20a8000: set_dir_flags: error: gpio GPIO4_0 not reserved gpio@20a8000: get_value: error: gpio GPIO4_13 not reserved gpio@20a8000: get_value: error: gpio GPIO4_0 not reserved gpio@20a0000: set_dir_flags: error: gpio GPIO2_1 not reserved gpio@20a0000: set_value: error: gpio GPIO2_1 not reserved Fixes: 191840ae99 ("ARM: imx: udoo_neo: Enable OF_CONTROL and DM gpio/pin control") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07riscv: sifive: Fix OF_BOARD boot failureBin Meng
When using QEMU to have a quick test of booting U-Boot S-mode payload directly without the needs of preparing the SPI flash or SD card images for SiFive Unleashed board, as per the instructions [1], it currently does not boot any more. This was caused by the OF_PRIOR_STAGE removal, as gd->fdt_blob no longer points to a valid DTB. OF_BOARD is supposed to replace OF_PRIOR_STAGE, hence we need to add the OF_BOARD logic in board_fdt_blob_setup(). [1] https://qemu.readthedocs.io/en/latest/system/riscv/sifive_u.html#running-u-boot Fixes: 2e8d2f88439d ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards") Fixes: d6f8ab30a2af ("treewide: Remove OF_PRIOR_STAGE") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-07rockchip: puma/lion: update MAINTAINERS fileQuentin Schulz
Philipp does not work at Theobroma Systems anymore so let's swap Philipp's address with mine. Cc: Philipp Tomsich <philipp.tomsich@vrull.eu> Cc: Quentin Schulz <foss+u-boot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
2022-01-05Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- kwbimage: Fix checksum calculation for v1 images (Pierre)
2022-01-05tools: kwbimage: Fix checksum calculation for v1 imagesPierre Bourdon
Recent changes caused fields in the image main header to be modified after the header checksum had already been computed. Move the checksum computation to once again be the last operation performed on the header. Fixes: 2b0980c24027 ("tools: kwbimage: Fill the real header size into the main header") Signed-off-by: Pierre Bourdon <delroth@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-28Merge tag 'video-20211228' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-video - mxsfb axi/disp_axi clock enable fix
2021-12-28Merge tag 'efi-2022-01-rc4-4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc4-4 UEFI: * allow for more than 16 KiB UEFI variable size when using StMM Others: * make watchdog sysreset compatible with separate poweroff driver * avoid OpenSSL deprecation warnings
2021-12-27doc: Fix usage of CFG_RPMB_WRITE_KEYIlias Apalodimas
This is a 'y/n' selection, so fix it. While at it remove the duplicate usage of CFG_CORE_HEAP_SIZE Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-27video: mxsfb: fix clk_get_by_name() return value checkGiulio Benetti
If clk_get_by_name() returns 0 it means it executed successfully while now we consider it as an error. So let's check if return value is negative to be an error. Otherwise this prevents "axi" and "disp_axi" to be enabled. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-12-26Merge https://source.denx.de/u-boot/custodians/u-boot-spiTom Rini
2021-12-26Merge tag 'u-boot-rockchip-20211226' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add kaslrseed support; - rk3568 spl and image tool support; - px30 dts sync from kernel; - rk3399 emmc fix; - rockchip fastboot cmd fix;
2021-12-26tools: avoid OpenSSL deprecation warningsHeinrich Schuchardt
Our Gitlab CI buildsystem is set up to treat warnings as errors. With OpenSSL 3.0 a lot of deprecation warnings occur. With the patch compatibility with OpenSSL 1.1.1 is declared. In the long run we should upgrade our code to use the current API. A -Wdiscarded-qualifiers warning is muted by casting. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-26sysreset: watchdog: watchdog cannot power offHeinrich Schuchardt
The watchdog system reset driver can reboot the device but it cannot power it off. If power off is requested, the driver should not reset the system but leave powering off to one of the other system reset drivers. As power cycling is typically not a feature of a watchdog driver the reset types SYSRESET_POWER and SYSRESET_POWER_OFF shall both be excluded. Fixes: 17a0c14164dc ("dm: sysreset: add watchdog-reboot driver") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-26efi_loader: Don't limit the StMM buffer size explicitlyIlias Apalodimas
Currently we allow and explicitly check a single shared page with StandAloneMM. This is dictated by OP-TEE which runs the application. However there's no way for us dynamically discover the number of pages we are allowed to use. Since writing big EFI signature list variable requires more than a page, OP-TEE has bumped the number of shared pages to four. Let's remove our explicit check and allow the request to reach OP-TEE even if it's bigger than what it supports. There's no need to sanitize the number of pages internally. OP-TEE will fail if we try to write more than it's allowed. The error will just trigger later on, during the StMM access. While at it add an error message to help users figure out what failed. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Ilias Apalodimas <apalos@gmail.com>
2021-12-26efi: fix typo in description of struct efi_entry_hdrHeinrich Schuchardt
Add missing colon. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-24rockchip: mkimage: Add support for rk3568 SoCKever Yang
rk3568 is the first SoC which supports idb header v2. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: mkimage: Add support for idb header V2Yi Liu
Rockchip BootRom supports new idb header v2 instead of legacy version. Add support for it so that we can generate image for new SoCs. Signed-off-by: Yi Liu <liuyi@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: mkimage: Add image header versionKever Yang
We are going to have more than one version header, add the version in the header info. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: mkimage: rename RK_SIGNATURE to RK_MAGICKever Yang
The first 4byte of idbimage is a magic number instead of signature, correct it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24configs: rock-pi-4: Enable rockchip efuse supportSjoerd Simons
Enable efuse support for reading the cpuid#, serial# and generate a board unique mac address Signed-off-by: Sjoerd Simons <sjoerd@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: boot_mode: fix fastboot commandJohn Keeping
The USB controller index must be separated from the type argument, otherwise the preboot command fails with the error: Error: Wrong USB controller index format Add the missing space to fix fastboot mode here. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24power: pmic/fan53555: allow dm be omitted by SPLQuentin Schulz
Allow the dm driver be omitted by SPL. Cc: Quentin Schulz <foss+u-boot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OFJagan Teki
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24arm64: dts: rockchip: Sync px30 from linux-nextJagan Teki
Sync the px30 devicetree files from linux-next tree. commit <14ce8069f48b> ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3") Note, this path even sync rk3326 files as it depends on px30. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsiJagan Teki
dmc node is specific to U-Boot, it is always better practice to maintain U-Boot specific nodes into -u-boot.dtsi files in order to maintain Linux dts file sync compatibility. Move the dmc into px30-u-boot.dtsi, also add dmc node explicitly in rk3326-odroid-go2-u-boot.dtsi since it is using px30.dts. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24doc: rockchip: puma: update build and flash instructionsQuentin Schulz
Long gone is the time a custom TF-A was needed for Puma, upstream TF-A works just fine now. The flashing instructions are updated to match how newer rkdeveloptool and rkbin work. Finally, rkbin provides a way to flash SPI via USB OTG interface so let's document that. Cc: Quentin Schulz <foss+u-boot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24dts: rockchip: rk3399: enable emmc phy for splYifeng Zhao
adapting commit ac804143cf ("mmc: rockchip_sdhci: add phy and clock config for rk3399") to fix the issue "Not found emmc phy device". Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> - on a Rock960 Reviewed-by: Patrick Wildt <patrick@blueri.se> Tested-by: Patrick Wildt <patrick@blueri.se> - on a Pinebook Pro Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: rk3568: add arch_cpu_init()Nico Cheng
We configured the drive strength and security of EMMC in arch_cpu_init(). Signed-off-by: Nico Cheng <nico.cheng@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24arm: dts: rockchip: rk3568: Enable sdhci and sdmmc0 nodeNico Cheng
Enable sdhci and sdmmc0 node in rk3568-u-boot.dtsi Signed-off-by: Nico Cheng <nico.cheng@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: Kconfig: Enable SPL support for rk3568Nico Cheng
Enable SPL support in Kconfig and add some related option in rk3568_common.h Signed-off-by: Nico Cheng <nico.cheng@rock-chips.com> Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24rockchip: px30: add support for HW RNG for Odroid Go AdvanceChris Morgan
The Odroid Go Advance has a hardware random number generator present. The device does not have an upstream Linux driver, but does have a U-Boot driver. Add the appropriate node so that the hardware RNG can be used in U-Boot. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24cmd: kaslrseed: add command to generate value from hwrngChris Morgan
Allow the kaslr-seed value in the chosen node to be set from a hardware rng source. Tested on a Rockchip PX30 (Odroid Go Advance), you must have loaded the devicetree first and prepared it for editing. On my device the workflow goes as follows: setenv dtb_loadaddr "0x01f00000" load mmc 0:1 ${dtb_loadaddr} rk3326-odroid-go2.dtb fdt addr ${dtb_loadaddr} fdt resize kaslrseed and the output can be seen here: fdt print /chosen chosen { kaslr-seed = <0x6f61df74 0x6f7b996c>; stdout-path = "serial2:115200n8"; }; Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-20Prepare v2022.01-rc4v2022.01-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-20Revert "image: Remove #ifdefs from select_ramdisk()"Tom Rini
This reverts commit f33a2c1bd0fb371511a485cac1f182ba50db51be. This causes a crash on some platforms as seen here: https://lore.kernel.org/r/f153017b-c41a-0d32-67b9-f288e695f900@baylibre.com/ Reported-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-20fw_setenv: Unbreak fw_setenv caused by buggy MEMISLOCKED useJoakim Tjernlund
Commit "fw_setenv: lock the flash only if it was locked before" checks for Locked status with uninitialized erase data. Address by moving the test for MEMISLOCKED. Fixes: 8a726b852502 ("fw_setenv: lock the flash only if it was locked before") Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
2021-12-20Merge tag '20211220-fixes-for-2022.01' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-i2c i2c changes for 20211220-fixes-for-2022.01 - mvtwsi: Swab the register address if its size is > 1
2021-12-20i2c: mvtwsi: Swab the register address if its size is > 1Stefan Roese
Testing on Armada XP with an EEPROM using register address with size of 2 has shown, that the register address bytes are sent to the I2C EEPROM in the incorrect order. This patch swabs the address bytes so that the correct address is transferred to the I2C device. BTW: This worked without any issues before migrating Armada XP to DM I2C. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Samuel Holland <samuel@sholland.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Pali Rohár <pali@kernel.org> Cc: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz>
2021-12-18Merge tag 'efi-2022-01-rc4-3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc4-3 Documentation: * add Calxeda Highbank/Midway board documentation Bug fixes: * call part_init() in blk_get_device_by_str() only for MMC * fix an 'undefined' error in some driver model macros
2021-12-18dm: fix an 'undefined' error in some macrosAKASHI Takahiro
Due to a non-existing parameter name in macro's, use of those macro's will cause a compiler error of "undefined reference". Unfortunately, dm test doesn't fail because a wrong name ("&dev", hence it is accidentally a valid name in the context of a caller site) is passed on. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Fixes: f262d4ca4b2b ("dm: core: Add a way to read platdata for all child devices") Fixes: 903e83ee8464 ("dm: core: Add a way to iterate through children, probing each") Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-18blk: add a helper function, blk_probe_or_unbind()AKASHI Takahiro
This function will be commonly used in block device drivers in the succeeding patches. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-18part: call part_init() in blk_get_device_by_str() only for MMCAKASHI Takahiro
In blk_get_device_by_str(), the comment says: "Updates the partition table for the specified hw partition." Since hw partition is supported only on MMC, it makes no sense to do so for other devices. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-18doc: board: Add Calxeda Highbank/Midway documentationAndre Przywara
The Calxeda servers are using U-Boot as the primary bootloader, which was shipped as part of a firmware upgrade package. Even though the machines are considered legacy at this point, the port still works, so deserves some documentation. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-17Merge commit '4720b83d2c711062cfb55f03591b8f12c897d7cb' of ↵Tom Rini
https://github.com/tienfong/uboot_mainline
2021-12-17arm: socfpga: arria10: Enable double peripheral RBF configurationTien Fong Chee
Double peripheral RBF configuration are needed on some devices or boards to stabilize the IO configuration system. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Sin Hui Kho <sin.hui.kho@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 00:53:18 +0000