summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-11arm: mvebu: msys: Set CONFIG_SYS_TCLK globallyPali Rohár
This mvebu msys platform always uses fixed 200 MHz TCLK. So specify this CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of manual configuration in every board file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: mvebu: a37x: Detect CONFIG_SYS_TCLK from SAR registerPali Rohár
Bit 20 in SAR register specifies if TCLK is running at 200 MHz or 166 MHz. Use this information instead of manual configuration in every board file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: mvebu: a38x: Detect CONFIG_SYS_TCLK from SAR registerPali Rohár
Bit 15 in SAR register specifies if TCLK is running at 200 MHz or 250 MHz. Use this information instead of manual configuration in every board file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device treeTony Dinh
In DM Ethernet, the old "egiga0" name is no longer valid, so replace these with Ethernet PHY names from device tree. Also, read Ethernet PHY address from device tree. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: kirkwood: GoFlex Home: Add DM SATA configsTony Dinh
Enable DM SATA in board file. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM SATA configsTony Dinh
Add DM_ETH, SATA_MV and associated configs to goflexhome_defconfig. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-10configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-09Merge tag 'u-boot-imx-20210809' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210809 - new SOC: add support for imx8ulp - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x) - convert to DM for mx28evk - Fixes for Gateworks ventana boards CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
2021-08-09Merge tag 'dm-pull-8aug21' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini
Use log subsystem for dm_warn() Various minor bug fixes
2021-08-09imx: cmd: use struct cmd_tblPeng Fan
cmd_tbl_t is removed, need use struct cmd_tbl Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx: add i.MX8ULP EVK supportPeng Fan
Add i.MX8ULP EVK basic support, support SD/I2C/ENET/LPUART Log as below: I would keep some debug info for now, and after we move to be stable and production launch, we could drop that. U-Boot SPL 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) Normal Boot upower_init: soc_id=48 upower_init: version:11.11.6 upower_init: start uPower RAM service user_upwr_rdy_callb: soc=b user_upwr_rdy_callb: RAM version:12.6 Turn on switches ok Turn on memories ok Clear DDR retention ok Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F0 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. Poll for freq_chg_req on SIM register and change to F1 frequency. Poll for freq_chg_req on SIM register and change to F2 frequency. complete De-Skew PLL is locked and ready WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x3a800 by ROM_API NOTICE: BL31: v2.4(release):imx_5.10.35_2.0.0_imx8ulp_er-10-gf37e59b94 NOTICE: BL31: Built : 01:56:58, Jun 29 2021 NOTICE: upower_init: start uPower RAM service NOTICE: user_upwr_rdy_callb: soc=b NOTICE: user_upwr_rdy_callb: RAM version:12.6 U-Boot 2021.07-rc4-00164-gb800e19a6b (Jun 29 2021 - 10:23:30 +0800) CPU: Freescale i.MX8ULP rev1.0 at 744 MHz Reset cause: POR Boot mode: Single boot Model: FSL i.MX8ULP EVK DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@293a0000 Out: serial@293a0000 Err: serial@293a0000 Net: Warning: ethernet@29950000 (eth0) using random MAC address - 96:35:88:62:e0:44 eth0: ethernet@29950000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: dts: add i.MX8ULP dtsiPeng Fan
Add i.MX8ULP dtsi Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09ddr: Add DDR driver for iMX8ULPYe Li
Add iMX8ULP DDR initialization driver which loads the DDR timing parameters and executes the training procedure. When enabling IMX8ULP_DRAM_PHY_PLL_BYPASS, using PHY PLL bypass mode to do DDR init Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09imx8ulp: add upower api supportPeng Fan
Add upower api support, this is modified from upower firmware exported package. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09imx8ulp: move struct mu_type to common headerPeng Fan
Move struct mu_type to common header to make it reusable by upower and S400 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09imx8ulp: Add workaround for eMMC bootYe Li
When booting from boot part1/2, the image offset should be 0, but ROM has a bug to return 0x8000. Has to workaround the issue before ROM fix it. Use a ROM function to know boot from emmc boot part or user part So we can set the image offset accordingly. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09imx8ulp: Use DGO_GP5 to get boot configYe Li
Since CMC1 MR0 only reflects high 16 bits boot cfg used for AP domian, it does not connect to low 16 bits for RTD. So we can't get the correct boot mode. Change to use DGO_GP5 of SEC_SIM which is set by ROM. Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09imx8ulp: soc: correct reset causePeng Fan
The CMC1 SRS reflects the current reset cause, not SSRS. Then you could get "Reset cause: WARM-WDG" when issue reset in U-Boot. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09driver: misc: imx8ulp: Add fuse driver for imx8ulpYe Li
This driver uses FSB to read some fuses, but not support program fuse. It only works in SPL (secure mode), u-boot needs traps to ATF to read them. Some fuses can read from S400 API and others are from FSB. Also support program some fuses via S400 API Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09arm: imx8ulp: add iomuxc supportPeng Fan
Add i.MX8ULP iomuxc support Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: add dummy imx_get_mac_from_fusePeng Fan
Add imx_get_mac_from_fuse for enet build pass Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domainYe Li
Configure DCNANO and MIPI_DSI to be controlled by AD for single boot Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: iMX8ULP: Add boot device relevant functionsYe Li
Read from ROM API to get current boot device. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: Probe the S400 MU device in arch initYe Li
Need probe the S400 MU device in arch_cpu_init_dm, so we can use S400 API in u-boot Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09imx8ulp: unify rdc functionsPeng Fan
Unify rdc function to rdc.c Update soc.c to use new rdc function Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: release trdc and assign lpav from RTD to APDPeng Fan
Rlease LPAV from RTD to APD Release gpu2D/3D to APD Set TRDC MBC2 MEM1 for iomuxc0 access Since upower depends AP/M33 SW to configure IOMUX for its PMIC i2c and MODE pins. we have to open iomuxc0 access for A35 core (domain 7) in single boot. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09arm: imx8ulp: add trdc release requestPeng Fan
Add TRDC release request, then we could configure resources to be accessible by A35 Domain. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: add rdc supportPeng Fan
There is xrdc inside i.MX8ULP, we need to configure permission to make sure AP non-secure world could access the resources. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: release and configure XRDC at early phaseYe Li
Since S400 will set the memory of SPL image to R/X. We can't write to any data in SPL image. 1. Set the parameters save/restore only for u-boot, not for SPL. to avoid write data. 2. Not use MU DM driver but directly call MU API to send release XRDC to S400 at early phase. 3. Configure the SPL image memory of SRAM2 to writable (R/W/X) Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09drivers: misc: s400_api: Update API for fuse read and writeYe Li
Add API to support fuse read and write Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09drivers: misc: imx8ulp: Update S400 API for release RDCYe Li
The RDC API is updated to add a field for XRDC or TRDC Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09drivers: misc: imx8ulp: Add S400 API for image authenticationYe Li
Add S400 API for image authentication Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6Ye Li
According to latest S400 API doc, the the success indicate value is changed to 0xd6. So update the driver codes. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: Update the reset vector in u-bootYe Li
Because we have set reset vector to ATF in SPL, have to set it back to ROM for any reset in u-boot Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: disable wdog3Peng Fan
Disable wdog3 which is configured by ROM Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: Enable full L2 cache in SPLYe Li
SRAM2 is half L2 cache and default to SRAM after system boot. To enable the full l2 cache (512KB), it needs to reset A35 to make the change happen. So re-implement the jump entry function in SPL: 1. configure the core0 reset vector to entry (ATF) 2. enable the L2 full cache 3. reset A35 So when core0 up, it runs into ATF. And we have 512KB L2 cache working. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: soc: Change to use CMC1 to get bootcfgYe Li
CMC1 also has a MR register for bootcfg Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09drivers: mmc: fsl_esdhc_imx: support i.MX8ULPPeng Fan
i.MX8ULP reuse same SDHC IP as i.MX8M, so follow i.MX8M code logic. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: add clock supportPeng Fan
Add i.MX8ULP clock support Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09driver: serial: fsl_lpuart: support i.MX8ULPPeng Fan
i.MX8ULP lpuart has same register layout as i.MX7ULP and i.MX8 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09pinctrl: Add pinctrl driver for imx8ulpYe Li
Add pinctrl driver for i.MX8ULP Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09net: fec_mxc: support i.MX8ULPPeng Fan
Support i.MX8ULP in fec_mxc Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-08-09driver: misc: Add MU and S400 API to communicate with SentinelYe Li
Add MU driver and S400 API. Need enable MISC driver to work Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09arm: imx: move container Kconfig under mach-imxPeng Fan
Since i.MX8 and i.MX8ULP reuse common container, so move the Kconfig public to both. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8ulp: add container supportYe Li
i.MX8ULP support using ROM API to load container image, it use same ROM API as i.MX8MN/MP, and use same container format as i.MX8QM/QXP. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx: parse-container: guard included header filesPeng Fan
Guard included sci.h with CONFIG_AHAB_BOOT to avoid build failure for i.MX8ULP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8: Move container image header file to mach-imxYe Li
Since the container is shared among i.MX platforms, move its header file to mach-imx Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09arm: imx8: Move container parser and image to mach-imx common folderYe Li
Since we will re-use the container parser on imx8ulp, move the codes to mach-imx Signed-off-by: Ye Li <ye.li@nxp.com>
2021-08-09arm: imx: basic i.MX8ULP supportPeng Fan
Add basic i.MX8ULP support For the MMU part, Using a simple way the calculate the MMU size to avoid default heavy calcaulation. And align address and size in the table settings to 2MB or 4GB as much as possible. So we can reduce the 4K page allocations in MMU table which will spends much time in create the page table Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09imx: imx8ulp: add get reset causePeng Fan
Add get reset cause function to show what triggerred reset. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-04 17:16:36 +0000