summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-18Makefile: With BINMAN_ALLOW_MISSING=1 don't error on missingTom Rini
When the user builds with BINMAN_ALLOW_MISSING=1 they're explicitly setting the flag to allow for additional binaries to be missing and so have acknowledged the output might not work. In this case we want to default to not passing a non-zero exit code. Cc: Simon Glass <sjg@chromium.org> Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-18Merge tag 'efi-2023-01-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-01-rc4 Documentation: * Fix htmldoc build dependency UEFI: * Adjust EBBR version for compatibility table
2022-12-18Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
This cleans up each board's defconfig, and fixes the serial console on some Olimex board. Also we lose another legacy config variable. The rest are minor cleanups, that actually shouldn't change anything in the build. Passed the gitlab CI, plus briefly tested on Pine64-LTS, LicheePi Nano, and BananaPi M1.
2022-12-17doc: update Sphinx requirements for certifiHeinrich Schuchardt
Upgrade to version 2022.12.7. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-17efi: adjust ebbr to v2.1 in conformance profileVincent Stehlé
The EFI Conformance Profile Table entry for EBBR appears in v2.1.0 of the EBBR specification[1]. Update naming accordingly. While at it, update the EBBR version referenced in the documentation. [1]: https://github.com/ARM-software/ebbr/releases/tag/v2.1.0 Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-17doc: fix typosMaxim Cournoyer
Fix a few typos spot during a first read of the contribution process. Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-15Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Adjust CONFIG_TEXT_BASE for BayTrail based platforms - 2 cosmetic issue fixes
2022-12-14sunxi: board: annotate #endif linesAndre Przywara
The legacy Allwinner code is cluttered with #ifdef's, some of them even nested, which makes the code hard to read and error prone. Eventually we will get rid of most of them, but for now let's at least annotate the #endif lines with the corresponding symbol the bracket started with. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14sunxi: remove bogus mmc_pinmux_setup() prototypeAndre Przywara
Since all callers of mmc_pinmux_setup() are located after the definition of that function, there is no need for a forward declaration (anymore?). Remove the prototype along with its #ifdef guards. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14sunxi: remove unused CONFIG_MMC_SUNXI_SLOTAndre Przywara
There is a CONFIG_MMC_SUNXI_SLOT definition in our sunxi_common.h config header, which was used to note the first MMC controller to initialise. The definition in that header was always set to 0, with no easy way of overriding this, and certainly none of the existing boards made any use of that (non-)feature. Remove that definition and replace it with a constant 0 in the only user, in board.c. It turns out that this is safe, as this is only used in the SPL, and the BROM also unconditionally initialises MMC0. This also removes the last legacy config symbol with SUN*I in it from the whitelist. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14x86: cosmetic: Fix a typo in the reserve_arch() commentsBin Meng
It should be fsp_continue(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-14x86: som-db5800-som-6867: Adjust CONFIG_TEXT_BASEBin Meng
At present U-Boot no longer builds as a complete rom for som-db5800-som-6867. BINMAN .binman_stamp Wrote map file './rom.map' to show errors binman: Section '/binman/rom': contents size 0x80302c (8400940) exceeds section size 0x800000 (8388608) Checking rom.map we see 'intel-vga' section is overlapped with other sections: <none> fff00000 0009f7c8 u-boot-with-ucode-ptr <none> fff90000 00010000 intel-vga <none> fff9f7c8 00001aae u-boot-dtb-with-ucode Let's adjust CONFIG_TEXT_BASE to allow more space for U-Boot codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2022-12-14x86: dfi-bt700: Adjust CONFIG_TEXT_BASEBin Meng
At present U-Boot no longer builds as a complete rom for all the configs of dfi-bt700. BINMAN .binman_stamp Wrote map file './rom.map' to show errors binman: Section '/binman/rom': contents size 0x80e836 (8448054) exceeds section size 0x800000 (8388608) Checking rom.map we see 'intel-vga' section is overlapped with other sections: <none> fff00000 000aac90 u-boot-with-ucode-ptr <none> fffa0000 00010000 intel-vga <none> fffaac90 00001df0 u-boot-dtb-with-ucode <none> fffaca80 00019800 u-boot-ucode Let's adjust CONFIG_TEXT_BASE to allow more space for U-Boot codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-12-14x86: conga-qeval20-qa3-e3845: Adjust CONFIG_TEXT_BASEBin Meng
At present U-Boot no longer builds as a complete rom for all the configs of conga-qeval20-qa3-e3845. BINMAN .binman_stamp Wrote map file './rom.map' to show errors binman: Section '/binman/rom': contents size 0x80b680 (8435328) exceeds section size 0x800000 (8388608) Checking rom.map we see 'intel-vga' section is overlapped with other sections: <none> fff00000 000a7cb0 u-boot-with-ucode-ptr <none> fffa0000 00010000 intel-vga <none> fffa7cb0 00001c1a u-boot-dtb-with-ucode <none> fffa98d0 00019800 u-boot-ucode Let's adjust CONFIG_TEXT_BASE to allow more space for U-Boot codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2022-12-14x86: minnowmax: Adjust CONFIG_TEXT_BASEBin Meng
At present U-Boot no longer builds as a complete rom for minnowmax. BINMAN .binman_stamp Wrote map file './rom.map' to show errors binman: Section '/binman/rom': contents size 0x803146 (8401222) exceeds section size 0x800000 (8388608) Checking rom.map we see 'fdtmap' section is overlapped with 'intel-vga' section: <none> fffa1390 00019800 u-boot-ucode <none> fffb0000 00010000 intel-vga <none> fffbab90 00000539 fdtmap Let's adjust CONFIG_TEXT_BASE to allow more space for U-Boot codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-14x86: bayleybay: Adjust CONFIG_TEXT_BASEBin Meng
At present U-Boot no longer builds as a complete rom for bayleybay. BINMAN .binman_stamp Wrote map file './rom.map' to show errors binman: Section '/binman/rom': contents size 0x814706 (8472326) exceeds section size 0x800000 (8388608) Checking rom.map we see 'fdtmap' section is overlapped with 'intel-vga' and 'intel-fsp' sections: <none> fffa2150 0002a000 u-boot-ucode <none> fffb0000 00010000 intel-vga <none> fffc0000 00038000 intel-fsp <none> fffcc150 00000539 fdtmap Let's adjust CONFIG_TEXT_BASE to allow more space for U-Boot codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2022-12-14x86: Fix i8259 ifdef include guardAlistair Delva
When building U-Boot with clang, it notices that the i8259.h include guard does not work correctly due to a typo. Fix it. Signed-off-by: Alistair Delva <adelva@google.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-12-14sunxi: Fix serial console for A10s-OLinuXino-MICROMark Kettenis
On this board CONFIG_CONS_INDEX needs to be 1 unlike other sun5i boards. Since this is the default, remove to bogus setting. Fixes: 7095f8641863 ("sunxi: Convert CONS_INDEX to Kconfig") Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-13pinctrl: sunxi: Add P2WI and RSB pinmuxesSamuel Holland
P2WI and RSB are used to communicate with a PMIC. Most SoCs have only one possible pinmux. F1C100s has two possibilities, with different mux values, so omit it until some board needs one of them. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-13sunxi: define SYS_MONITOR_LEN in Kconfig, not _defconfigAndre Przywara
Commit 08574ed339fb ("Convert CONFIG_SYS_MONITOR_LEN to Kconfig") moved the definition of said config variable from the common sunxi header to *every board's* defconfig. This is a platform choice, not board specific, so remove the variable from there, instead set the one value for all Allwinner boards in Kconfig. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-12-13Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot"Tom Rini
With the change here, all extlinux.conf files with only "KERNEL /fitImage" don't work anymore. One common example of this would be those files generated by thee Poky/OE WIC bootimg-partition bootloader partition generator. This reverts commit d5ba6188dfbf6bb68354bec86e483623f1f6dae2. Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Reported-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-12Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- mvebu: Espressobin: Fix default env variables (Derek)
2022-12-12Merge tag 'u-boot-stm32-20221212' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supply dm: pmic: ignore disabled node in pmic_bind_children
2022-12-12dm: pmic: ignore disabled node in pmic_bind_childrenPatrick Delaunay
Ignore the disabled children node in pmic_bind_children() so the disabled regulators in device tree are not registered. This patch is based on the dm_scan_fdt_node() code - only the activated nodes are bound - and it solves possible issue when a deactivated regulator is bound, error for duplicated regulator name for example. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-12phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supplyPatrick Delaunay
Use regulator_set_enable_if_allowed() api instead of regulator_set_enable() while disabling vbus supply. This way the driver doesn't see an error when it disable an always-on regulator for VBUS. This patch is needed for STM32MP157C-DK2 board when the regulator v3v3: buck4 used as the phy vbus supply in kernel device tree is always on with the next hack for low power use-case: &usbphyc_port0 { ... /* * Hack to keep hub active until all connected devices are suspended * otherwise the hub will be powered off as soon as the v3v3 is disabled * and it can disturb connected devices. */ connector { compatible = "usb-a-connector"; vbus-supply = <&v3v3>; }; }; Without this patch and the previous update in DT the command "usb stop" failed and the next command "usb start" cause a crash. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de>
2022-12-12arm: mvebu: Espressobin: Fix default env variablesDerek LaHousse
Default env variables on Espressobin boards are broken since commit c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for $fdtfile env variable") as well as the 'env default -a' command. The algorithm to find free space in the default_environment[] array returns after the first env variable instead of the correct position of the last variable, where there is allocated free space. This causes that U-Boot board_late_init() function to overwrite a portion of the default environment with $ethXaddr and $fdtfile variables immediately after the first env variable and so it is overwriting other variables. This patch also adds an additional null byte to terminate the environment array. But U-Boot board_late_init() function do not fill this nul byte explicitly. And because of that, U-Boot is later trying to interpret remaining buffer as a continuation of variable list. Normally buffer should be empty but due to the above issue, it contains garbage from remaining env variables. For example 'env default -a' command results in damaging variable names. It was observed that scritaddr variable name was changed to criptaddr (without leading 's'). This bug was reported and discussed on the Armbian forum: https://forum.armbian.com/topic/19564-making-espressobin-v7-work-in-2022/?do=findComment&comment=138136 Fix these issues in two steps: 1) Change code which finds free space for dynamic env variables in default_environment[] array by jumping to the end of the variable list instead of jumping after the first defined variable. [By Derek] 2) Add code which appends terminating nul byte as indication of the end of the env list, after the last nul term env string. [By Pali] Fixes: c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for $fdtfile env variable") Signed-off-by: Derek LaHousse <derek@seaofdirac.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Stefan Roese <sr@denx.de>
2022-12-11Merge tag 'u-boot-nand-20221211' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-nand-flash Merge tag 'u-boot-nand-20221211' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash - cmd: nand: Extend nand info to print ecc information - rawnand: omap_gpmc: driver model support (the first patches of the series) - mtd: nand: make Samsung SLC NAND usable again - cmd: mtd: check if a block has to be skipped or erased - spl: spl_legacy: fix invalid offset in SPL_COPY_PAYLOAD_ONLY
2022-12-10spl: spl_legacy: fix invalid offset in SPL_COPY_PAYLOAD_ONLYDai Okamura
This fixes the header offset calculation. This issue was found on uniphier v7 SoCs with SPL. Fixes: 06377c5a1f ("spl: spl_legacy: Fix NAND boot on OMAP3 BeagleBoard") Signed-off-by: Dai Okamura <okamura.dai@socionext.com> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221209114021.3074978-1-okamura.dai@socionext.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: nand: mxs_nand_spl: don't read useless pagesDario Binacchi
The patch prevents pages beyond the last from being unnecessarily read. This occurs when the last page to be read is not the last page of the last block. Before this change we would have read all the pages up to the end of the last block. Suggested-by: Michael Trimarchi <michael@amarulasolutions.com> Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221120095705.3019295-1-dario.binacchi@amarulasolutions.com
2022-12-10mtd: nand: drop EXPORT_SYMBOL_GPL for nanddev_erase()Dario Binacchi
This function is only used within this module, so it is no longer necessary to use EXPORT_SYMBOL_GPL(). This patch parallels the work done in the following patch: https://lore.kernel.org/linux-mtd/20221018170205.1733958-1-dario.binacchi@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221108090719.3631621-1-dario.binacchi@amarulasolutions.com
2022-12-10cmd: mtd: check if a block has to be skipped or erasedDario Binacchi
As reported by patch [1], the `mtd erase' command should not erase bad blocks. To force bad block erasing you have to use the `mtd erase.dontskipbad' command. This patch tries to fix the same issue without modifying code taken from the linux kernel, in order to make further upgrades easier. [1] https://lore.kernel.org/all/20221006031501.110290-2-mikhail.kshevetskiy@iopsys.eu/ Suggested-by: Michael Trimarchi <michael@amarulasolutions.com> Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Co-developed-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> Tested-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: nand: make Samsung SLC NAND usable againMichael Trimarchi
Upstream linux commit 69fc01296c9281 commit a1286a1fc416 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c") introduced a regression for Samsung SLC NAND chips. Prior to this commit chip->bits_per_cell was initialized by calling nand_get_bits_per_cell() before using nand_is_slc(). With the offending commit this call is skipped, leaving chip->bits_per_cell cleared to zero when the manufacturer specific '.detect' function calls nand_is_slc() which in turn interprets bits_per_cell != 1 as indication for an MLC chip. The effect is that e.g. a K9F1G08U0F NAND chip is falsely detected as MLC NAND with 4KiB page size rather than SLC with 2KiB page size. Add a call to nand_get_bits_per_cell() before calling the .detect hook function in nand_manufacturer_detect(), so that the nand_is_slc() calls in the manufacturer specific code will return correct results. Reported-by: Marcin Gołaś <marcingol30@gmail.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20221021060536.11747-1-michael@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Reduce .bss usageRoger Quadros
Allocate omap_ecclayout on the heap as we have limited .bss space on AM64 R5 SPL configuration. Reduces .bss usage by 2984 bytes. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-9-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: nand_spl_loaders: Fix cast type build warningRoger Quadros
Fixes the below build warning on 64-bit platforms. drivers/mtd/nand/raw/nand_spl_loaders.c:26:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] dst = (void *)((int)dst - page_offset); Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-8-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Optimize NAND readsRoger Quadros
Rename omap_nand_read() to omap_nand_read_buf() to reflect actual behaviour. Use FIFO read address instead of raw read address for reads. The GPMC automatically converts 32-bit/16-bit reads to NAND device specific reads (8/16 bit). Use the largest possible read granularity size for more efficient reads. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-5-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platformsRoger Quadros
Pointer size cannot be assumed to be 32-bit, so use use uintptr_t instead of uint32_t. Fixes the below build warning on 64-bit builds. drivers/mtd/nand/raw/omap_gpmc.c:439:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] head = ((uint32_t) buf) % 4; Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-4-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Enable build for K2/K3 platformsRoger Quadros
The GPMC module is present on some K2 and K3 SoCs. Enable building GPMC NAND driver for K2/K3 platforms. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-3-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.hRoger Quadros
We want to get rid of <asm/arch/mem.h> so don't enforce it for new platforms. This also means GPMC_MAX CS doesn't have to be defined by platform code. Define it locally here for now. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/all/20221011115012.6181-2-rogerq@kernel.org Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-10cmd: nand: Extend nand info to print ecc informationMichael Trimarchi
Extract the information about ecc strength and ecc step size from mtd controller. This information is usefull to check if what we think as ecc is what we really configured. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20220922133937.277463-1-michael@amarulasolutions.com Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-12-08Merge tag 'u-boot-stm32-20221207' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Drop MMCI interrupt-names in STM32H743, STM32MP15 and STM322MP13 DT DHSOM: - Enable assorted ST specific commands - Add version variable - Add boot counter STM32MP13: - Add sdmmc cd-gpios for STM32MP135F-DK - Add clock & reset support STM32 ADC: - Split channel init into several routines - Add support of generic channels binding
2022-12-08Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
- DFU and RNDIS fixes
2022-12-08usb: gadget: rndis: Prevent InformationBufferOffset manipulationSzymon Heidrich
Prevent access to arbitrary memory locations in gen_ndis_set_resp via manipulation of buf->InformationBufferOffset. Original implementation permits manipulation of InformationBufferOffset to exploit OID_GEN_CURRENT_PACKET_FILTER to set arbitrary memory contents within a 32byte offset as the devices packet filter. The packet filter value may be next retrieved using gen_ndis_query_resp so it is possible to extract specific memory regions two bytes a time. The rndis_query_response was not modified as neither the buffer offset nor length passed to gen_ndis_query_resp is used. Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
2022-12-08dfu: Make DFU virtual backend SPL friendlyPatrick Delaunay
Define stub for dfu_*_virt function in SPL, because CONFIG_SPL_DFU_VIRT is not defined. This patch avoids compilation issue in dfu_fill_entity() when CONFIG_SPL_DFU is activated because the dfu_fill_entity_virt() function is not available. Fixes: ec44cace4b8d2 ("dfu: add DFU virtual backend") Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de>
2022-12-08usb: gadget: dfu: Fix check of transfer directionHugo SIMELIERE
Commit fbce985e28eaca3af82afecc11961aadaf971a7e to fix CVE-2022-2347 blocks DFU usb requests. The verification of the transfer direction was done by an equality but it is a bit mask. Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Sultan Qasim Khan <sultan.qasimkhan@nccgroup.com> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de>
2022-12-08Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Kautuk's semihosting patch: move semihosting library from arm directory to common place and add RISC-V support - Zong's Kconfig patch: use "imply" instead of "select" to allow user to decide if SPL_SEPARATE_BSS should be selected
2022-12-08Merge tag 'u-boot-at91-fixes-2023.01-b' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 Second set of u-boot-at91 fixes for the 2023.01 cycle: This is a single tiny fix that allows the correct name for one pin on sama7g5 device. People with DT coming from Linux will have build errors without this if they add NAND device.
2022-12-08riscv: use imply instead of select for SPL_SEPARATE_BSSZong Li
Use imply instead of select, then it can still be disabled by board-specific defconfig, or be set to n manually. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng@tinylab.org>
2022-12-08common/spl/Kconfig: add dependency on SPL_SEMIHOSTING for SPL payloadKautuk Consul
When we enable CONFIG_SPL and CONFIG_SPL_SEMIHOSTING then the code in common/spl/spl_semihosting.c tries to use the CONFIG_SPL_FS_LOAD_PAYLOAD_NAME string which remains undeclared unless SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS are configured. Add a dependency of SPL_SEMIHOSTING in the depends for SPL_FS_LOAD_PAYLOAD_NAME so that the code compiles fine. Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-08arch/riscv: add semihosting support for RISC-VKautuk Consul
We add RISC-V semihosting based serial console for JTAG based early debugging. The RISC-V semihosting specification is available at: https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-08lib: Add common semihosting libraryKautuk Consul
We factor out the arch-independent parts of the ARM semihosting implementation as a common library so that it can be shared with RISC-V. Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-09 02:19:04 +0000