summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-26clocks: qcs404: Add support for USB clocksSumit Garg
Add support for USB controller and PHY clocks for QCS404 SoC. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26clocks: qcom: Add clock enable callback supportSumit Garg
Drivers like USB, ethernet etc. uses ".enable" hook to enable clocks. So add corresponding support for Qcom clock drivers. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26dts: qcs404-evb: Add reset controller nodeSumit Garg
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26reset: qcom: Add support for QCS404 SoC reset tableSumit Garg
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26reset: Convert ipq4019 driver to a generic Qcom driverSumit Garg
Since the base functionality remains the same for a reset driver on Qcom SoCs, so leverage that to convert ipq4019 specific reset driver to a generic Qcom reset driver. With that one just need to provide SoC specific reset table. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26phy: Add support for drivers to enable USB on QCS404 SoCSumit Garg
QCS404 SoC supports two types of PHY, one supports high speed mode or USB2 PHY and the other supports super speed mode or USB3 PHY. So add corresponding PHY drivers. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26phy: Move qcom SoCs specific phy drivers to qcom folderSumit Garg
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2022-08-26arm: total_compute: enable psciDavidson K
psci is used for system reset Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
2022-08-26configs: j721s2_evm_a72_defconfig: fix the bootcmdJayesh Choudhary
Remove the main_cpsw0_qsgmii_phyinit variable from the boot command as there is no ethernet firmware in j721s2. Fixes: 8886341aa670 ('configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig') Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
2022-08-24Merge commit 'ac30d240dbb520d0980f0687630feb702a14f51a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next Re-sync again on some linux part, add some fixes for fsl_elbc from Pali and switch imx8mn bsh to use nand base ident For nand subsystem tested on: - imx8mn Macronix MX30LF4G18AC - P2020 based board Turris 1.1 for fsl_elbc
2022-08-23Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- kirkwood: pogo_v4 & nsa310s: Add distro boot (Tony) - kirkwood: add DM timer support and use it on lsxl boards (Michael) - kirkwood: convert the Buffalo Linkstation LS-CHLv2 and XHL boards to DM (Michael) - mvebu: turris_mox/omnia: misc improments (Pali) - mvebu: mbus: Fix mbus driver to work also after U-Boot relocation (Pali)
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23board: lsxl: update the READMEMichael Walle
Update the board's README to reflect all the recent changes. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: disable eth0Michael Walle
The board has only one network interface. The linux kernel will gracefully skip a the ethernet interface if no connected PHY could be probed. u-boot on the other hand will throw an error message. The kernel device tree is about to be fixed. For now, just disable the ethernet interface in our -u-boot.dtsi. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: convert to CONFIG_TIMERMichael Walle
Enable the orion timer driver and we are good. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: convert to DM_SERIALMichael Walle
DM_SERIAL needs early malloc. The on-chip RAM is pretty tight, it's only 2kiB, with DM_SERIAL enabled, this doesn't work anymore. Fortunately for us, we don't need the on-chip RAM because the DRAM is already initialized before u-boot starts. Just put the early malloc area there and use the default early malloc size. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: convert to DM_ETHMichael Walle
Just enabling the Kconfig option for DM_ETH and DM_MDIO is enough. Additionally, we can remove the old hardcoded config. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: convert to DM_GPIOMichael Walle
Use the new mvebu GPIO driver and convert all the function calls to the former kirkwood GPIO driver. This means that we are now using the LED uclass and the regulator uclass. Unfortunately, the GPIO LED doesn't offer a blinking method. Thus we are now stuck with solid on and off states, which makes debugging a bit harder. Also, there is no GPIO fan driver for now. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: make last resort recovery more reliableMichael Walle
If something is wrong with the environment, we cannot rely on a proper u-boot operation anymore. In fact, it is possible, that we never reach misc_init_r() with a broken environment. Also don't enable the netconsole by environment settings. This way the user don't have to reconfigure the environment. Instead the network console is only enabled when the push button is pressed during boot. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: enable ATAGS supportMichael Walle
We still need to be able to boot legacy images. Esp. the debian installer will have a kernel with an appended DTB. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: use proper *_r variablesMichael Walle
Use the common kernel_addr_r, ramdisk_addr_r and fdt_addr_r variable names. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: reorder image loading and remove ramdisk_lenMichael Walle
We can load the ramdisk as the last step. This way we don't have to set the intermediate variable 'ramdisk_len' and can remove it. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: use CONFIG_DEFAULT_FDT_FILEMichael Walle
Drop our own CONFIG_FDTFILE handling in favor of the generic CONFIG_DEFAULT_FDT_FILE one. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: automatically select CONFIG_MISC_INIT_RMichael Walle
The board code needs this to be set. Otherwise, the recovery mechanism doesn't work. Therefore, select this option automatically with the board. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: remove unused header filesMichael Walle
Cleanup the included header files in the board code. These are all leftovers from earlier days. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: remove CONFIG_ENV_OVERWRITEMichael Walle
This is not needed. The user can force setting the variables with "setenv -f". Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: remove eraseenv scriptMichael Walle
This is not needed. The user can do a "env default -f -a". Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: remove unused featuresMichael Walle
Make the binary smaller by removing unused features. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23board: lsxl: limit size to 384kiBMichael Walle
The board only has a 4Mbit flash and two sectors are reserved for the u-boot environment and the device tree. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23button: gpio: add DM_GPIO dependencyMichael Walle
The gpio-button driver depends on DM_GPIO, add it to Kconfig to avoid build errors. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23timer: add orion-timer supportMichael Walle
Add timer support for Kirkwood and MVEBU devices. Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23arm: kirkwood: make it CONFIG_TIMER awareMichael Walle
If we switch to CONFIG_TIMER, we don't need the legacy timer macros and functions anymore. Add the proper guards to exclude them from compiling. Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23arm: kirkwood: 88f6281: Detect CONFIG_SYS_TCLK from SAR registerPali Rohár
Bit 21 in SAR register specifies if TCLK is running at 166 MHz or 200 MHz. This information is undocumented in public Marvell Kirkwood Functional Specifications [2], but is available in Linux v3.15 kirkwood code [1]. Commit 8ac303d49f89 ("arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK") broke support for Marvell 88F6281 SoCs because it was expected that all those SoCs have TCLK running at 200 MHz as specified in Marvell 88F6281 Hardware Specifications [3]. Fix broken support for 88F6281 by detecting CONFIG_SYS_TCLK from SAR register, like it was doing Linux v3.15. [1] - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm/mach-kirkwood/common.c?h=v3.15#n542 [2] - https://web.archive.org/web/20130730091033/http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf [3] - https://web.archive.org/web/20120620073511/http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf Update by Stefan 2022-08-23: - Fix compilation error for ds109 Fixes: 8ac303d49f89 ("arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23time: move the CONFIG_SYS_TIMER_RATE handling to the compilerMichael Walle
CONFIG_SYS_TIMER_RATE might be a dynamic value, i.e. a function call instead of a static value, thus it has to be evaluated at runtime. If it is a static value, the compiler should be able to optimize the unused branches out. This will be needed for kirkwoods dynamic CONFIG_SYS_TCLK setting. Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23arm: kirkwood: nsa310s: Add Distro boot capabilityTony Dinh
- Add distro boot to board include file and deconfig file - Miscellaneous changes: - Remove Gerald from maintainer list (email bounced) - Add CONFIG_SUPPORT_PASSING_ATAGS and friends to support legacy kernel method of booting (e.g. OpenWrt) with appended DTB. - Add CONFIG_UBIFS_SILENCE_MSG to reduce binary size. Note that this patch is depended on the following patch: https://patchwork.ozlabs.org/project/uboot/patch/20220807192709.21717-1-pali@kernel.org/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-08-23arm: mvebu: mbus: Fix mbus driver to work also after U-Boot relocationPali Rohár
mbus driver is initialized from arch_cpu_init() callback which is called before relocation. This driver stores lot of functions and structure pointers into global variables, so it is data position dependent. Therefore after relocations all pointers are invalid and driver does not work anymore as all pointers referes to the old memory, which overlaps with CONFIG_SYS_LOAD_ADDR and ${loadaddr}. For example U-Boot fuse command crashes if loadaddr memory is cleared or rewritten by some image loaded by U-Boot load command. mw.w ${loadaddr} 0x0 10000 fuse read 0 1 2 Fix this issue by removing of all mbus global variables in which are stored pointers to structures or functions which changes during relocation. And replace it by direct function calls (not via pointers). With this change fuse command finally works. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23arm: mvebu: turris_mox: Set "sfp" label in eth1 DT node when only Mox SFP is ↵Pali Rohár
detected When Mox SFP module is connected after Topaz or Peridot module then port DT node already contains "sfp" label. But Mox SFP module can be connected also without Topaz or Peridot module in which case it is connected directly into he eth1 DT node, which is without any label. So add "sfp" label into eth1 DT node in this case. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23arm: mvebu: turris_omnia: Show MCU versionPali Rohár
There are already more MCU firmware versions for Turris Omnia in production, so display git commit (version) of the MCU firmware during U-Boot startup. It will help to identify what version of MCU firmware is Turris Omnia using. MCU firmware for Turris Omnia is open source and available at website: https://gitlab.nic.cz/turris/hw/omnia_hw_ctrl It can be updated from running system via i2c bus with this tool: https://gitlab.nic.cz/turris/omnia-mcutool Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23arm: kirkwood: pogo_v4: Add Distro boot capabilityTony Dinh
- Add distro boot to board include file and deconfig file - Miscellaneous changes: - Add CONFIG_SUPPORT_PASSING_ATAGS and friends to support legacy kernel method of booting (e.g. OpenWrt) with appended DTB. - Add CONFIG_LTO and CONFIG_UBIFS_SILENCE_MSG, and disable some unused configs to reduce binary size. Note that this patch is depended on the following patch: https://patchwork.ozlabs.org/project/uboot/patch/20220807192709.21717-1-pali@kernel.org/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-08-23arm: mvebu: Define env_sf_get_env_addr() for all Armada boards in SPLPali Rohár
SPI0 CS0 Flash is mapped to address range 0xD4000000 - 0xD7FFFFFF by BootROM. Proper U-Boot removes this direct mapping. So it is available only in SPL. This applies for all 32-bit Armada BootROMs. SPL mvebu code is used only on 32-bit Armada SoCs. So move env_sf_get_env_addr() function from Turris Omnia board to common SPL mvebu code and add proper checks for SPI0 CS0. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-22Prepare v2022.10-rc3v2022.10-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-22Merge tag 'dm-pull-20aug22' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm binman fixes for various things binman clean-up of compression and addition of utilities
2022-08-22Merge branch '2022-08-22-platform-removals-CI-updates'Tom Rini
- Remove a few more platforms, update CI to Ubuntu 22.04 and perform some other other minor updates to Azure.
2022-08-22CI: Move to Ubuntu 2022.04 "Jammy" for CI baseTom Rini
- We now have a new enough sbsigntools in the distro, stop building. - Use the 20220801 tag for Jammy. - Move to pygit2 1.9.2 (current version) as the old one doesn't build on "Jammy". - Add the working directory to the list of safe directories for git. - Move to pytest 6.2.5 to address other issues. - This move exposed a number of minor issues in the existing scripts we used within CI to perform the jobs themselves. The most notable changes here involve using 'set +e / set -e' to enforce when we should or should not make non-zero buildman status be a fatal error. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-22mtd: rawnand: fsl_elbc: Fix reading address pointer from DTPali Rohár
During compilation gcc throws warning: drivers/mtd/nand/raw/fsl_elbc_nand.c: In function ‘fsl_elbc_nand_probe’: drivers/mtd/nand/raw/fsl_elbc_nand.c:841:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] return fsl_elbc_chip_init(0, (void *)dev_read_addr(dev), dev); ^ Fix it by using dev_read_addr_ptr() function which returns pointer instead of dev_read_addr() which returns integer type. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-08-22mtd: rawnand: fsl_elbc: Remove NAND_NO_SUBPAGE_WRITE flagPali Rohár
Subpage write support for freescale eLBC NAND controller driver is implemented in U-Boot and was fixes in the commit d3963721d93f ("nand: Sync with Linux v4.1"). So remove NAND_NO_SUBPAGE_WRITE flag from the fsl_elbc_nand.c driver. This partially revert commit cb04c7723429 ("nand/fsl: add NAND_NO_SUBPAGE_WRITE to eLBC and IFC drivers"), only eLBC driver part. With this change U-Boot with default settings can read from NAND UBIFS image created on Linux with Linux default settings. Prior this change U-Boot was unable to read from NAND UBIFS images created with Linux default settings due to differnet UBI geometry. Linux kernel fsl_elbc_nand.c driver also does not set NAND_NO_SUBPAGE_WRITE flag and has implemented subpage write support. Fixes: cb04c7723429 ("nand/fsl: add NAND_NO_SUBPAGE_WRITE to eLBC and IFC drivers") Fixes: d3963721d93f ("nand: Sync with Linux v4.1") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Acked-By: Michael Trimarchi<michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-08-22configs: imx8mn_bsh_smm_s2: Use nand_base ident for nand identificationMichael Trimarchi
The board can mount different nand brand type. Try to use the full scan detection and not the onfi one Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-08-22mtd: nand: samsung: Retrieve ECC requirements from extendedMichael Trimarchi
Upstream linux commit 8fc82d456e40a0. On some nand controllers with hw-ecc the controller code wants to know the ecc strength and size and having these as 0, 0 is not accepted. Specifying these in devicetree is possible but undesirable as the nand may be different in different production runs of the same board, so it is better to get this info from the nand id where possible. This commit adds code to read the ecc strength and size from the nand for Samsung extended-id nands. This code is based on the info for the 5th id byte in the datasheets for the following Samsung nands: K9GAG08U0E, K9GAG08U0F, K9GAG08X0D, K9GBG08U0A, K9GBG08U0B. These all use these bits in the exact same way. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-08-22mtd: nand: Rename nand_get_flash_type() into nand_detect()Michael Trimarchi
Upstream linux commit 7bb427990ee364. Rename the function to match this new behavior. NOTE: fix nand_detect/nand_get_flash_type parameters in mxs_nand_spl. This code seems never executed by any board as alternative for nand detect Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-08-22mtd: nand: change return type of nand_get_flash_type() to intMichael Trimarchi
Upstream linux commit 4722c0e958e636. The returned "type" is never used in nand_scan_ident() and spl code Make nand_get_flash_type() simply return an integer value in order to avoid unnecessary ERR_PTR/PTR_ERR dance. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 00:37:25 +0000