summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-22fs: ext4: check the minimal partition size to mountPatrick Delaunay
No need to mount a too small partition to handle a EXT4 file system. This patch add a test on partition size before to read the SUPERBLOCK_SIZE buffer and avoid error latter in fs_devread() function. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-03-22gitattributes: Treat .bin files as binary.Sebastian Andrzej Siewior
Binary files, which are committed to a private fork of this repository, will be subject to line feed substitution unless marked as binary. Mark .bin files as binary. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2023-03-22configs: am62x_evm_a53_defconfig: Fix SF_DEFAULT_MODENikhil M Jain
Setting sf default mode to 0x3 breaks sf update when we do SF read through u-boot console. This issue arises when we do a splash image through OSPI flash media, to fix this set the default mode to 0x0. Fixes: 04150400c967 ("configs: enable OSPI related configs in AM62x") Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-03-22arm: total_compute: Remap console logsannsai01
Remapping console logs from soc uart2 (s1 terminal) to css non-secure (uart_ap terminal) Signed-off-by: Annam Sai Manisha <annam.saimanisha@arm.com>
2023-03-22configs: am62: move stack and heap to HSM RAMKamlesh Gurudasani
On high security devices, ROM enables firewalls to protect the OCSRAM region access during bootup. Only after TIFS has started (and had time to disable the OCSRAM firewall region) will we have write access to the region. This means we will need to move the stack & heap from OCSRAM to HSM RAM and reduce the size of BSS and the SPL to allow it to fit properly. To protect us from overflowing our ~256k of HSM SRAM, add limits and check during the wakeup SPL build. Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
2023-03-22arm: mach-k3: am62: move scratch board area to HSM RAMKamlesh Gurudasani
On high security devices, ROM enables firewalls to protect the OCSRAM region access during bootup. Only after TIFS has started (and had time to disable the OCSRAM firewall region) will we have write access to the region. So, move scratch board area to HSM RAM. Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
2023-03-22console: Use flush() before panic and resetTony Dinh
To make sure the panic and the reset messages will go out, console flush() should be used. Sleep periods do not work in early u-boot phase when timer driver is not initialized yet. Reference: https://lists.denx.de/pipermail/u-boot/2023-March/512233.html Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-03-22README.mpc85xx-sd-spi-boot: Suggest the NXP boot format github repoFabio Estevam
As explained in the text at the bottom of the page https://source.codeaurora.org/external/qoriq/qoriq-yocto-sdk/boot-format: "QUIC repositories on this site will not receive any updates after March 31, 2022, and will be deleted on March 31, 2023." Point to the NXP boot format github repo instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2023-03-22Merge tag 'u-boot-amlogic-20230322' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - odroid-go-ultra: setup PMIC regulators at board init
2023-03-21Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
A single reset controller driver (part of the clock driver) fix for v2023.04 release.
2023-03-20Merge tag 'u-boot-rockchip-20230319' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Fix for rockchip timer driver; - Fix for rk3568 and rk3588 boot device and clock driver; - Fix for rk3568 reset handler; - Fix for rk3568 sdhci DLL at 52MHz;
2023-03-20clk: renesas: Pack reset identifier before look upMarek Vasut
The reset identifier must be processed via MOD_CLK_PACK() before it is used to look up register and bit within reset_regs or reset_clear_regs arrays, otherwise completely bogus register and bit is picked from the arrays, one which may even be out of range. Fixes: 326e05c5e21 ("clk: renesas: Add and enable CPG reset driver") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-19arm: dts: rockchip: rk3188-radxarock-u-boot: remove timer compatible replacementJohan Jonker
The Rockchip timer driver has been renamed after the fall back compatible. There's no need to replace the timer compatible in rk3188-radxarock-u-boot.dtsi anymore, so remove. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: timer: rockchip_timer: fix compatible and driver nameJohan Jonker
In the binding for the Rockchip timer the compatible string consists of a SoC orientated string and a fall back string "rockchip,rk3288-timer", so remove all unneeded ones and fix driver name. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: sdhci: rk3568: bypass DLL when clk <= 52 MHzVasily Khoruzhick
For Rockchip platform, DLL bypass bit and start bit need to be set if DLL is not locked. With this change applied eMMC in my NanoPi R5S can run at 52 MHz. Based on linux commit b75a52b0dda3 ("mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19Revert "arm64: dts: rk356x-u-boot: Drop combphy1 assigned-clocks/rates"Vasily Khoruzhick
This reverts commit 5bec4b0de7851a254fb4447b3599a60f95550141. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19clk: rockchip: rk3568: add stubs for CLK_PCIEPHY_REF clocksVasily Khoruzhick
Device tree contains assigned-clock-rates property for these, but default value will work just fine Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2023-03-19rockchip: include: configs: Remove unused SDRAM_BANK_SIZEJonas Karlman
Remove unused SDRAM_BANK_SIZE define. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: include: configs: Remove dangling commentsJonas Karlman
This removes dangling comments that no longer serve a purpose and has been left after conversion of defines to Kconfig option. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19mmc: rockchip_dw_mmc: Fix get_mmc_clk return valueJonas Karlman
The get_mmc_clk ops is expected to set a clock rate and return the configured rate as an unsigned value. However, if clk_set_rate fails, e.g. using a fixed rate clock, a negative error value is returned. The mmc core will treat this as a valid unsigned rate and tries to configure a divider based on this bogus clock rate. Use 0 as the return value when setting clock rate fails, the mmc core will configure to use bypass mode instead of using a bogus divider. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: tinker-rk3288: Use common BOOT_TARGET_DEVICESJonas Karlman
Building U-Boot for Tinker Board with USB or NET Kconfig option disabled result in the following build error: In file included from include/configs/rk3288_common.h:29, from include/configs/tinker_rk3288.h:14, from include/config.h:3, from include/common.h:16, from env/common.c:10: include/config_distro_bootcmd.h:302:9: error: expected '}' before 'BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:302:9: note: in definition of macro 'BOOTENV_DEV_NAME_USB' 302 | BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/configs/tinker_rk3288.h:21:9: note: in expansion of macro 'BOOTENV_DEV_NAME' 21 | func(USB, usb, 0) \ | ^~~~ include/config_distro_bootcmd.h:454:25: note: in expansion of macro 'BOOT_TARGET_DEVICES' 454 | "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0" | ^~~~~~~~~~~~~~~~~~~ include/config_distro_bootcmd.h:474:9: note: in expansion of macro 'BOOTENV_BOOT_TARGETS' 474 | BOOTENV_BOOT_TARGETS \ | ^~~~~~~~~~~~~~~~~~~~ include/configs/rk3288_common.h:40:9: note: in expansion of macro 'BOOTENV' 40 | BOOTENV | ^~~~~~~ include/env_default.h:122:9: note: in expansion of macro 'CFG_EXTRA_ENV_SETTINGS' 122 | CFG_EXTRA_ENV_SETTINGS | ^~~~~~~~~~~~~~~~~~~~~~ In file included from env/common.c:32: include/env_default.h:29:36: note: to match this '{' 29 | const char default_environment[] = { | ^ make[2]: *** [scripts/Makefile.build:256: env/common.o] Error 1 The BOOT_TARGET_DEVICES defined in rockchip-common.h include the same devices as defined in tinker_rk3288.h, remove the board specific one to fix building with USB or NET option disabled. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: rk3588: Add boot device detectionJonas Karlman
Enable SPL on RK3588 to detect which device it was booted from. Fixes use of same-as-spl in u-boot,spl-boot-order prop. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19clk: rockchip: rk3588: Fix clk_aux16m in clock driverJonas Karlman
The rate and error value is not returned for aux16m clocks, fix this. Fixes: 7a474df74023 ("clk: rockchip: Add rk3588 clk support") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19clk: rockchip: rk3568: Fix reset handlerPeter Geis
The reset handler for rk3568 is missing its private data. This leads to an abort when a reset is triggered. => reset resetting ... "Synchronous Abort" handler, esr 0x96000045 elr: 0000000000a2bc04 lr : 0000000000a2bbd4 (reloc) elr: 00000000eff9bc04 lr : 00000000eff9bbd4 x0 : 00000000fdd20000 x1 : 0000000014000001 x2 : 000000000000fdb9 x3 : 00000000edf77e88 x4 : 00000000edf50e78 x5 : 00000000edf77530 x6 : 000000000000001d x7 : 00000000edf8a1d0 x8 : 00000000ffffffd8 x9 : 0000000000000008 x10: 000000000000000d x11: 0000000000000006 x12: 000000000001869f x13: 0000000086c290c5 x14: 000000009118e878 x15: 0000000000000000 x16: 00000000eff9bbb8 x17: 0000000012f8c119 x18: 00000000edf50dc0 x19: 0000000000000000 x20: 0000000000000001 x21: 0000000000000000 x22: 00000000edf85900 x23: 0000000000000001 x24: 00000000effe8bbc x25: 0000000000000000 x26: 00000000edf85940 x27: 0000000000000000 x28: 0000000000000000 x29: 00000000edf3c8e0 Code: d65f03c0 d5033fbf b9400661 529d9502 (b8216802) Resetting CPU ... Add the missing dev_set_priv to the rk3568 clk driver to fix this. Fixes: 4a262feba3a5 ("rockchip: rk3568: add clock driver") Signed-off-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # radxa-cm3 Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2023-03-19rockchip: rk3568-rock-3a: Sync device tree from linuxJonas Karlman
Running U-Boot from eMMC on a ROCK 3 Model A result in the following: U-Boot SPL 2023.04-rc3 (Mar 11 2023 - 17:24:48 +0000) Trying to boot from MMC1 Card did not respond to voltage select! : -110 spl: mmc init failed with error: -95 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The sdhci node is missing in board device tree, sync device tree from linux v6.3-rc1 to fix booting from eMMC. Also disable sdmmc2 and uart1 nodes related to using a WiFi and BT module in the M2 slot. Fixes: b44c54f600ab ("arm64: dts: rockchip: rk3568: Add Radxa ROCK 3 Model A board support") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: rk3568: Fix boot device detectionJonas Karlman
The boot source node path for emmc is using the old sdhci name. Replace with correct mmc name and also add same-as-spl to boot order. Fixes: 0d61f8e5f1c0 ("rockchip: rk3568: add boot device detection") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-19rockchip: Fix early use of bootph propsJonas Karlman
Running U-Boot on a ROCK 3 Model A result in the following: No serial driver found resetting ... no sysreset ### ERROR ### Please RESET the board ### Replace bootph- props with u-boot,dm- props to fix this. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-03-15Merge branch 'master' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-coldfire
2023-03-15Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
Per Andre: [T]hese two patches containing just devicetree updates for Allwinner boards. I was still hoping for a review, since we cannot import the files from the Linux tree verbatim, but managed to write some filter script that convinced me that the changes are fine. The files are from Linux v6.2-rc2, but are identical to the v6.2 release.
2023-03-15board: m5253demo: remove floating point flash size calculationAngelo Dureghello
This board is using floating point arithmetic to display the SST39VF6401B flash size. This actually generates errors with toolchains without appropriate sw fp math functions available. SST39VF6401B is the only flash for wich the size is displayed, it's size is 8192KB and floating point calculation seems not needed. Removing it. Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-03-15m68k: add private libgcc ashrdi3Angelo Dureghello
Add ashrdi3.c to private libgcc. Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-03-15board: amcore: fix config options namespaceAngelo Dureghello
Remove CONFIG_ namespace options from .h, moving them to defconfig, while changing non-defconfig options to CFG_ namespace. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15m68k: rename CONFIG_MCFTMR to CFG_MCFTMRAngelo Dureghello
This is not a Kconfig option so changing to _CFG. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15m68k: dts: stmark2: set correct compatible field for spi norAngelo Dureghello
Fix error: Invalid chip select 0:1 (err=-19) update spi nor "compatible" property with "jedec,spi-nor" to have spi nor properly bound as a child device. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15arch: enable private libgcc for m68kAngelo Dureghello
This patch fixes u-boot hanging on the first printf("%x", val). Some toolchains built without multilib enabled may produce u-boot freezing on first u64 shift operation, as in lib/vsprintf.c number() function. Using our private libgcc solves the issue. Setting private libgcc enabled at architecture level to avoid similar issues, it should not harm. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15board: stmark2: fix clock valueAngelo Dureghello
Fix totally blank console at boot, clock value must be decimal, as for the 30Mhz external crystal. Fixes: 26e5944ec90c ("stmark2: Migrate CONFIG_SYS_EXTRA_OPTIONS to Kconfig") Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-03-15m68k: add global variable sdhc_per_clk for m68kAngelo Dureghello
The FSL eSDHC controller supports two reference clocks. They are platform clock and periperhal clock. The global variable sdhc_clk has already been used for platform clock. ColdFire also uses eSHDC controller, as in arm and powerpc, so adding sdhc_per_clk to arch_global_data. Signed-off-by: Angelo Durgehello <angelo@kernel-space.org>
2023-03-15m68k: use longword-based jumpsAngelo Dureghello
Increasing of binary size requires longword-based jumps. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2023-03-15board: amcore: fix u-boot mtd partitionAngelo Dureghello
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
2023-03-14ARM: meson: odroid-go-ultra: setup PMIC regulators are board initNeil Armstrong
The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Link: https://lore.kernel.org/r/20230210-u-boot-odroid-go-ultra-pmics-setup-v1-1-1f16d62b76af@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-13Prepare v2023.04-rc4v2023.04-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-13Merge tag 'efi-2023-04-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-04-rc4 Documentation: * man-page for panic command UEFI: * Correct parameter check for SetVariable() Other: * Provide unit test for crc8
2023-03-13efi_loader: describe term_get_char()Heinrich Schuchardt
Add a function description. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-03-13efi_loader: update SetVariable attribute checkMasahisa Kojima
UEFI specification v2.10 says that EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS is deprecated and EFI_UNSUPPORTED should be returned in SetVariable variable service. Current implementation returns EFI_INVALID_PARAMETER, let's fix the return value. Together with above change, this commit also updates the SetVariable attribute check to be aligned with the EDK2 reference implementation. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-03-13doc: man-page for panic commandHeinrich Schuchardt
Provide a man-page for the panic command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-13doc: uefi: fix linksVincent Stehlé
Fix a couple of links so that they are rendered correctly with sphinx. Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-03-13test: unit test for crc8Heinrich Schuchardt
Add a unit test for the crc8() function. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-10Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
Two minimal Kconfig/Makefile fixes for USB.
2023-03-10Merge https://source.denx.de/u-boot/custodians/u-boot-shTom Rini
Assorted Renesas fixes below, namely MMC clocking breakage fix, clock Kconfig fix, pin control unused symbols removal, and sysinfo fix and enablement on now fixed platforms.
2023-03-10Merge tag 'dm-pull-10mar23' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm fixes and tests for the fdt command
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-07 03:13:25 +0000