| Age | Commit message (Collapse) | Author |
|---|
|
Newer versions of python will emit a TypeError about not enough
arguments for a format string:
FAILED ub/test/py/tests/test_mmc.py::test_mmc_dev - TypeError: not enough arguments for format string
FAILED ub/test/py/tests/test_mmc.py::test_mmcinfo - TypeError: not enough arguments for format string
FAILED ub/test/py/tests/test_mmc.py::test_mmc_info - TypeError: not enough arguments for format string
FAILED ub/test/py/tests/test_mmc.py::test_mmc_rescan - TypeError: not enough arguments for format string
FAILED ub/test/py/tests/test_mmc.py::test_mmc_part - TypeError: not enough arguments for format string
Add parentheses around all multi argument format strings so all
arguments will be passed to the format string
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
On platforms with spl splash support i.e CONFIG_VIDEO=y, the top of DDR
is reserved for the framebuffer.
The size for the framebuffer is computed at runtime by video_reserve.
During the MMU configuration an entry corresponding to the framebuffer
should be dynamically created to properly map the required space for the
framebuffer.
Therefore this patch adds k3_spl_mem_map_init which adds the required
MMU entry by querying the gd after the framebuffer size has been
computed in spl_reserve_video_from_ram_top.
For non VIDEO=y platforms, the added k3_spl_mem_map_init function gets
optimized out of the final binary so overall, the spl size is not
impacted[1].
[1]: Tested on clang 19.1.7 and gcc 15.1.1
Signed-off-by: Anshul Dalal <anshuld@ti.com>
|
|
In u-boot we only provide a single MMU table for all k3 platforms,
this does not scale for devices with reserved memory outside the range
0x9e780000 - 0xa0000000 or for devices with < 2GiB of memory (eg
am62-SIP with 512MiB of RAM).
To properly configure the MMU on various k3 platforms, the
reserved-memory regions need to be queried at runtime from the
device-tree and the MMU table should be updated accordingly.
This patch adds the required fixups to the MMU table (during proper
U-boot stage) by marking the reserved regions as non cacheable and
keeping the remaining area as cacheable.
For the A-core SPL, the 128MiB region starting from SPL_TEXT_BASE
is marked as cacheable i.e 0x80080000 to 0x88080000.
The 128MiB size is chosen to allow for future use cases such as falcon
boot from the A-Core SPL which would require loading kernel image from
the SPL stage. This change also ensures the reserved memory regions that
all exist past 0x88080000 are non cacheable preventing speculative
accesses to those addresses.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
|
|
dw_pcie_link_set_max_link_width()"
This patch set from Marek Vasut <marek.vasut+renesas@mailbox.org>
introduces dw_pcie_link_set_max_link_width() similar to the Linux Kernel
and then migrates the current platform drivers to use it. Next it adds
support for Renesas R-Car Gen4 platforms and enables it on one.
Link: https://lore.kernel.org/r/20250617081641.8385-1-marek.vasut+renesas@mailbox.org
|
|
Sparrow Hawk board
Enable support for R-Car Gen4 PCIe controller and NVMe storage
on Retronix R-Car V4H Sparrow Hawk board .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Add R-Car Gen4 PCIe controller support for host mode.
This controller is based on Synopsys DesignWare PCIe. However, this
particular controller has a number of vendor-specific registers, and as
such, requires initialization code, including PHY firmware loading.
The PHY firmware loading is implemented in an entirely generic manner,
by calling a firmware loading script, which the user can configure in
a way they require. This provides the user with flexibility of loading
the PCIe firmware from whichever storage device they need to load it
from.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Use dw_pcie_link_set_max_link_width() instead of local implementation
of the same functionality. This does change the behavior slightly, as
the dw_pcie_link_set_max_link_width() implementation also programs the
LNKCAP register MLW, this should however be correct and is now aligned
with Linux kernel behavior.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Use dw_pcie_link_set_max_link_width() instead of local implementation
of the same functionality.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Use dw_pcie_link_set_max_link_width() instead of local implementation
of the same functionality. This does change the behavior slightly, as
the dw_pcie_link_set_max_link_width() implementation also programs the
LNKCAP register MLW, this should however be correct and is now aligned
with Linux kernel behavior.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add dw_pcie_link_set_max_link_width() implementation ported from Linux kernel
as of commit 89db0793c9f2 ("PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling").
This is common code which is already duplicated in multiple drivers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The sandbox is used for a lot of generic development, we should run the
UEFI tests there, too.
The TPM emulation on the sandbox is incomplete. Disable the TCG test on
sandbox.
Link: https://lore.kernel.org/r/20250617061945.9266-1-heinrich.schuchardt@canonical.com
|
|
The sandbox is used for a lot of generic development, we should run the
UEFI tests there, too.
Reported-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
The TPM emulation on the sandbox is incomplete.
Even basic tcg2 functionality like get_capability() fails:
lib/efi_selftest/efi_selftest_tcg2.c(886):
ERROR: get_manufacturer_id buffer too small failed
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
Hrushikesh Salunke <h-salunke@ti.com> says:
This series adds support for the Endpoint mode on Cadence PCIe controller
on TI's K3 family of SoCs. The driver is an adaptation of the Linux
driver (drivers/pci/controller/cadence/pci-j721e.c) and has been
implemented specifically for Endpoint mode of operation on AM64X. A minor
set of changes will be sufficient to support other K3 SoCs as well.
This patch is tested on AM64X EVM. Following are the log corresponding
to this feature.
https://gist.github.com/hrushikesh221/e8557cbe7667877c50f7d7e9bb96d060
Link: https://lore.kernel.org/r/20250616164929.631791-1-h-salunke@ti.com
|
|
TI's AM64x SoC has a single instance of PCIe Controller namely PCIe0
which is a Cadence PCIe Controller. To support PCI Endpoint
functionality with the PCIe0 instance of PCIe, enable the corresponding
configs.
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
|
|
Add support for Endpoint mode of operation in the Cadence PCIe
Controller present on TI's K3 SoCs. This driver is an adaptation of the
Linux kernel v6.15 driver (drivers/pci/controller/cadence/pci-j721e.c).
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
|
|
Udit Kumar <u-kumar1@ti.com> says:
Many boards based upon K3 ARCH overrides default malloc size to 32MB,
as part of cleanup, add default size of 32MB for K3 ARCH.
Link: https://lore.kernel.org/r/20250614093717.2479920-1-u-kumar1@ti.com
|
|
This is same as done in commit 27cd65ca1bf1 ("mach-k3: am62ax: enable
caches for the SPL stage").
This is resulting in ~2x speedup in the A53 SPL stage.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
|
|
Use default value of malloc size coming from Kconfig, instead of
board specific override.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Many boards of K3 overwrites default malloc size, instead
of doing at almost each board level,
Add default size at Kconfig.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
CONFIG_LTO enables Link Time Optimizations that helps in reducing binary
size. The config has been validated on all K3 platforms so can be safely
enabled.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
|
|
This is a port of the corresponding commit in the Linux kernel which
adds the same support for the Cadence Torrent driver[0]. The commit
message below is taken as-is from the Linux kernel commit being ported.
The Torrent SERDES can support at most two different protocols (PHY types).
This only mandates that the device-tree sub-nodes used to represent the
configuration should describe links with at-most two different protocols.
The existing implementation however imposes an artificial constraint that
allows only two links (device-tree sub-nodes). As long as at-most two
protocols are chosen, using more than two links to describe them in an
alternating configuration is still a valid configuration of the Torrent
SERDES.
A 3-Link 2-Protocol configuration of the 4-Lane SERDES can be:
Lane 0 => Protocol 1 => Link 1
Lane 1 => Protocol 1 => Link 1
Lane 2 => Protocol 2 => Link 2
Lane 3 => Protocol 1 => Link 3
A 4-Link 2-Protocol configuration of the 4-Lane SERDES can be:
Lane 0 => Protocol 1 => Link 1
Lane 1 => Protocol 2 => Link 2
Lane 2 => Protocol 1 => Link 3
Lane 3 => Protocol 2 => Link 4
[0] https://github.com/torvalds/linux/commit/5b7b83a9839be643410c31d56f17c2d430245813
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
|
|
When booting RISC-V ELF-formatted kernel images (IH_TYPE_KERNEL + IH_OS_ELF),
explicitly pass SMP hart ID (via a0/argc) and DTB address (via a1/argv)
to comply with modern SMP-enabled kernels' boot protocol requirements.
See https://www.kernel.org/doc/html/latest/arch/riscv/boot.html#register-state
Signed-off-by: Zone.N <zone.niuzh@hotmail.com>
|
|
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
To implement the EFI_SYSTEM_TABLE_POINTER we need 4 MiB aligned
memory.
On the sandbox LMB uses addresses relative to the start of a page aligned
RAM buffer allocated with mmap(). This leads to a mismatch of alignment
between EFI which uses pointers and LMB which uses phys_addr_t.
Ensure that the RAM buffer used for LMB is 4 MiB aligned.
Provide a unit test for efi_alloc_aligned_pages() verifying this alignment.
Do not overwrite RAM size in dram_init().
Link: https://lore.kernel.org/r/20250608075428.32631-1-heinrich.schuchardt@canonical.com
|
|
Provide unit tests for efi_alloc_aligned_pages() and
efi_allocate_pages().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
To implement the EFI_SYSTEM_TABLE_POINTER we need 4 MiB aligned
memory.
On the sandbox LMB uses addresses relative to the start of a page aligned
RAM buffer allocated with mmap(). This leads to a mismatch of alignment
between EFI which uses pointers and LMB which uses phys_addr_t.
Ensure that the RAM buffer used for LMB is 4 MiB aligned.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
dram_init() must not overwrite the value of gd->ram_buf set by
setup_ram_buf() for main U-Boot or board_init_f() for SPL.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Background:
I have several customers that will be using a certain remote signing
service for signing their images, in order that the private keys are
never exposed outside that company's secure servers. This is done via
a pkcs#11 interface that talks to the remote signing server, and all
of that works quite well.
However, the way this particular signing service works is that one
must upfront create a "signing session", where one indicates which
keys one will use and, importantly, how many times each key will (may)
be used. Then, depending on the keys requested and the customer's
configuration, one or more humans must authorize that signing session
So for example, if official release keys are to be used, maybe two
different people from upper management must authorize, while if
development keys are requested, the developer himself can authorize
the session.
Once authorized, the requester receives a token that must then be used
for signing via one of the keys associated to that session.
I have that integrated in Yocto in a way that when a CI starts a BSP
build, it automatically works out which keys will be needed (e.g. one
for signing U-Boot, another for signing a kernel FIT image) based on
bitbake metadata, requests an appropriate signing session, and the
appropriate people are then notified and can then look at the details
of that CI pipeline and confirm that it is legitimate.
The problem:
The way mkimage does FIT image signing means that the remote server
can be asked to perform a signature an unbounded number of times, or
at least a number of times that cannot be determined upfront. This
means that currently, I need to artificially say that a kernel key
will be used, say, 10 times, even when only a single FIT image with
just one configuration node is created.
Part of the security model is that once the number of signings using a
given key has been depleted, the authorization token becomes useless
even if somehow leaked from the CI - and _if_ it is leaked/compromised
and abused before the CI has gotten around to do its signings, the
build will then fail with a clear indication of the
compromise. Clearly, having to specify a "high enough" expected use
count is counter to that part of the security model, because it will
inevitably leave some allowed uses behind.
While not perfect, we can give a reasonable estimate of an upper bound
on the necessary extra size by simply counting the number of hash and
signature nodes in the FIT image.
As indicated in the comments, one could probably make it even more
precise, and if there would ever be signatures larger than 512 bytes,
probably one would have to do that. But this works well enough in
practice for now, and is in fact an improvement in the normal case:
Currently, starting with size_inc of 0 is guaranteed to fail, so we
always enter the loop at least twice, even when not doing any signing
but merely filling hash values.
Just in case I've missed anything, keep the loop incrementing 1024
bytes at a time, and also, in case the estimate turns out to be over
64K, ensure that we do at least one attempt by changing to a do-while
loop.
With a little debug printf, creating a FIT image with three
configuration nodes previously resulted in
Trying size_inc=0
Trying size_inc=1024
Trying size_inc=2048
Trying size_inc=3072
Succeeded at size_inc=3072
and dumping info from the signing session (where I've artifically
asked for 10 uses of the kernel key) shows
"keyid": "kernel-dev-20250218",
"usagecount": 9,
"maxusagecount": 10
corresponding to 1+2+3+3 signatures requested (so while the loop count
is roughly linear in the number of config nodes, the number of
signings is quadratic).
With this, I instead get
Trying size_inc=3456
Succeeded at size_inc=3456
and the expected
"keyid": "kernel-dev-20250218",
"usagecount": 3,
"maxusagecount": 10
thus allowing me to set maxusagecount correctly.
Update a binman test case accordingly: With the previous behaviour,
mkimage would try size_inc=0 and then size_inc=1024 and then
succeed. With this patch, we first try, and succeed, with 4*128=512
due to the four hash nodes (and no signature nodes) in 161_fit.dts, so
the image ends up 512 bytes smaller.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
supernodes"
Moteen Shah <m-shah@ti.com> says:
In the U-Boot pre-relocation stage, if the parent node lacks
bootph-all/bootph-some-ram property and the driver lacks a pre-reloc
flag, all of its subsequent subnodes gets skipped over from driver
binding—even if they have a bootph* property.
This series addresses the issue by scanning through all the nodes during
build time and propagating the applicable property to all of its supernode.
Link: https://lore.kernel.org/r/20250516114148.3862114-1-m-shah@ti.com
|
|
Add a testcase to ensure that scan_and_prop_bootph() actually
propagates bootph-* properties to supernodes.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
to supernodes
As per bootph schema, bootph-* property in child node should be
implied in their parent, but this feature is not implemented in
the U-Boot proper stage (before relocation) resulting in devices
not being bound because of the missing bootph-all or bootph-some-ram
property in the parent node.
To mitigate this issue, add a function to scan through all the nodes
in the device-tree for bootph-all and bootph-some-ram properties. If
found, propagate it to all of its parent nodes up the hierarchy.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
Yannic Moog <y.moog@phytec.de> says:
This series solves a contradiction regarding ext blobs packaged in
binman. When they are marked as optional, by default they are faked, two
messages are emitted. One says the image is not functional the other
says the image is still functional. Both concern the same binman
entry/blob.
Binman is set up to have fake external blobs in case they are missing.
This is regardless on whether they are optional or not.
The implementation does not allow different types of entries to override
the faking decision; at least there wouldn't be much sense in doing so.
Here is an example build output of a phycore-imx8mp:
BINMAN .binman_stamp
Image 'image' is missing optional external blobs but is still functional: tee-os
/binman/section/fit/images/tee/tee-os (tee.bin):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Image 'image' has faked optional external blobs and is still functional: tee.bin
OFCHK .config
The output stays to inform/warn the user, but in this case the tee-os
entry will not be present in the final image.
Link: https://lore.kernel.org/r/20250613-binman_faked_optional-v3-0-1e23dd7c41a2@phytec.de
|
|
When external blobs are marked optional, they should not cause a
build to fail. Extend the test cases for FitTeeOsOptional and
ExtblobOptional.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
Some test cases don't use _DoTestFile directly which accepts
allow_fake_blobs. However, they specifically test functionality that
requires external blobs not to be faked. Extend the _DoReadFileDtb
signature to allow passing that option to _DoTestFile.
Also fix tests that require non-faked ext blobs.
By default, external blobs are faked. Some tests care only about more
basic functionality. In those cases no external blobs should be faked.
That would trigger a different (binman) case which is not in scope for
those particular tests.
Thus, disable faked blobs for those test cases.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
When having an entry that is marked as optional and is missing in the
final image, the following output is observed:
CFGS spl/u-boot-spl.cfgout
BINMAN .binman_stamp
Image 'image' has faked external blobs and is non-functional: tee.bin
Image 'image' is missing optional external blobs but is still functional: tee-os
/binman/section/fit/images/tee/tee-os (tee.bin):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Some images are invalid
make: *** [Makefile:1135: .binman_stamp] Error 103
To solve this contradictory messaging, when checking the faked blob
list, remove entries that are allowed to be missing. Instead add an
info message for faked optional blobs. Also reduce verbosity of the
optional image warning to an info message.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
When blobs are absent and are marked as optional, they can be safely
dropped from the binman tree. Use the drop_absent function for that.
Rename drop_absent to drop_absent_optional as we do not want to drop any
entries that are absent; they should be reported by binman as errors
when they are missing.
We also reorder the processing of the image the following:
- We call the CheckForProblems function before the image is built.
- We drop entries after we checked for problems with the image.
This is okay because CheckForProblems does not look at the file we have
written but rather queries the data structure (image) built with binman.
This also allows us to get all error and warning messages that we want
to report while avoiding putting missing optional entries in the final
image.
As only the blobs are dropped, the sections still remain in the
assembled image. Thus add them to the expected test case checks where
necessary.
In addition, a rework of testPackTeeOsOptional test case is necessary.
The test did not really do what it was supposed to. The description said
that optional binary is tested, but the binary is not marked as
optional. Further, the tee.elf file, when included in the image
properly, also shows up in the image data. This must be added as well.
As there is no global variable for the elf data, set the pathname to the
elf file that was created when setting up the test suite.
For the test case get the filename and read the contents, comparing them
to the contents of the created binman image.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
Optional blobs should mark themselves as absent to avoid being packed
into an image.
Extend the documentation of this behaviour. Although the documentation
implied this before, the "optional" property had not been explained
properly before.
The behaviour will change as now absent entries are no longer
packed into an image. The image map will also reflect this.
As a result, the CheckForProblems() function will no longer alert on
optional (blob) entries. This is because the missing optional images
were removed before CheckForProblems is called.
Adjust the testExtblobOptional test case to highlight that we are
testing not only an optional image but the image is missing as well. The
behaviour for these is different where the latter will not be packaged
into the image.
Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
check_fake_fname sets the faked member of the entry. Use that member
to get the faked status instead of a returned value indicating the same.
Add type annotations to the modified functions while at it.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
Bryan Brattlof <bb@ti.com> says:
Now that TIFS and DM firmwares are marked as mandatory items for a
successful build[0] we should provide some more descriptive help text on
where to get the firmware in the event they are not found and add links
to more information about them.
We do need to expand the regex to allow the '.' dot in 'ti-fs-enc.bin'
so we can add it to the list which was the lesser number of lines
changed than renaming all these entries to 'tifs' or 'ti-fs' which the
current regex will match.
Link: https://lore.kernel.org/r/20250612-missing-blob-help-entries-v2-0-36f1c8078155@ti.com
|
|
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
DHCP and DHCPv6 use the same value defined in
https://www.iana.org/assignments/dhcpv6-parameters#processor-architecture
to encode the processor architecture type. We should only use a single
Kconfig symbol for both protocols.
Furthermore we should make the value customizable. This allows for instance
to choose between "x86 BIOS" or "x64 UEFI".
As "x86 BIOS" is encoded as 0, we should not use this value to switch
off transmission of the DHCP option. Use 0xFF instead.
Link: https://lore.kernel.org/r/20250608074228.12407-1-heinrich.schuchardt@canonical.com
|
|
Aristo Chen <jj251510319013@gmail.com> says:
This series introduces a validation step in mkimage to ensure that all image
names referenced under the /configurations node of a FIT source (ITS) are
actually defined under the /images node.
### Motivation
When using mkimage to build FIT images, it's easy to mistakenly reference
nonexistent image nodes in configurations (e.g., referencing a missing `fdt` or
`firmware` node). Such issues are often not caught until runtime in U-Boot.
This series aims to catch these errors early during FIT image creation by
validating the configuration references in mkimage itself.
Link: https://lore.kernel.org/r/20250610074121.8308-1-aristo.chen@canonical.com
|
|
Now that the TIFS firmware is marked as a mandatory component to a
successful build, provide some helpful descriptions to what it is and
links to more information about how to get this needed firmware.
Signed-off-by: Bryan Brattlof <bb@ti.com>
|
|
Extend the regex to add periods '.' in the tag so entries like
ti-fs-enc.bin can be represented in the missing-blob-help file.
Signed-off-by: Bryan Brattlof <bb@ti.com>
|
|
Now that the inner certificate for TI's Foundation Security TIFS
firmware is mandatory to a successful build, provide some guidance on
what it is and links to the documentation on how to obtain the firmware
blobs.
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
|
|
Now that ti-dm is marked as a mandatory component for a successful
build, adding some helping text about how to resolve a failed build will
be needed. Add some text around what ti-dm is and links to more
documentation on how to obtain the firmware binaries
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
|
|
As the list of entries grows let's alphabetize the list to make
searching a little easier. No functional changes intended
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
|
|
DHCP and DHCPv6 use the same value defined in
https://www.iana.org/assignments/dhcpv6-parameters#processor-architecture
to encode the processor architecture type. We should only use a single
Kconfig symbol for both protocols.
Furthermore we should make the value customizable. This allows for instance
to choose between "x86 BIOS" or "x64 UEFI".
As "x86 BIOS" is encoded as 0, we should not use this value to switch
off transmission of the DHCP option. Use 0xFF instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Remove duplicate definition of
* DHCP6_PXE_CLIENTARCH
* DHCP6_PXE_DHCP_OPTION
* DHCP6_ENTERPRISE_ID
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fixes: da24eb553279 ("Merge patch series "BOOTP/DHCPv4 enhancements"")
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Fixes: 5eb1b7843811 ("Merge patch series "test/py: enable HTTP testing"")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
The phycore-am62x build was broken due to mkimage reporting an undefined
'image "tifsstub-hs"' in the 'loadables' property of the FIT configuration.
This occurred because the `loadables` field referenced `tifsstub-hs`,
`tifsstub-fs`, and `tifsstub-gp`, but no corresponding nodes were defined
under /images.
This patch was inspired by commit 622f826bf025704cbcc4f39252d4a83129a9cabb
("arm: dts: phycore-am62x: Package TIFS Stub"). It resolves the issue by
adding proper Binman nodes for each TIFS variant (`tifsstub-hs`,
`tifsstub-fs`, and `tifsstub-gp`).
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
|
|
Add a test case to verify that mkimage correctly rejects a FIT source
that references a non-existent image from a configuration node.
This test introduces a minimal ITS that defines a valid kernel image
but references a missing "fdt" image under the /configurations section.
The test asserts that mkimage fails with a clear error message, as
introduced in the new validation logic.
This helps ensure the validation logic behaves correctly and prevents
regressions in future FIT enhancements.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
|
