summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-13Tegra30: Add funcmux for UART over SD slotJonas Schwöbel
Tegra 3 has UART-E exposable via SD card slot which may be handy for debugging. This change only adds funcmux part, to use UART-E on the device you additionally would need: - set stdout-path to serial@70006400 (uarte) - configure sdmmc1_dat3_py4 and sdmmc1_dat2_py5 pinmux for uarte - disable or remove sdhci@7800000 node - enable CONFIG_TEGRA_ENABLE_UARTE in defconfig - set CFG_SYS_NS16550_COM to NV_PA_APB_UARTE_BASE in device header Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2024-10-13board: tegra: convert boards to text envSvyatoslav Ryhel
Convert boards to use text based env. This is the first stage of conversion, common inclusions should be converted next. Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis TK1 Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2024-10-13disk: add TegraPT supportSvyatoslav Ryhel
TegraPT is compatible with EFI part but it can't pass Protective MBR check. Skip this check if CONFIG_TEGRA_PARTITION is enabled, storage uclass is MMC and devnum is 0. Note, eMMC on supported devices MUST be aliased to mmc0. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2024-10-09mtd: simplify CONFIG_DM_SPI_FLASH dependenciesHeinrich Schuchardt
CONFIG_DM_SPI depends on CONFIG_DM. There is no need to list CONFIG_DM explicitly as dependency for CONFIG_DM_SPI_FLASH Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20240604044039.27795-1-heinrich.schuchardt@canonical.com
2024-10-09Merge patch series "spi: Various Kconfig fixes"Tom Rini
John Watts <contact@jookia.org> says: I'm doing some SPI work so I tried to compile all the drivers on my sunxi board to try and avoid some regressions. This failed, so here are some fixes for this. Link: https://lore.kernel.org/r/20240427-spikconfig-v1-0-8a54772522f4@jookia.org Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-09spi: rockchip_sfc: Select BOUNCE_BUFFERJohn Watts
This is required for compiling. Signed-off-by: John Watts <contact@jookia.org>
2024-10-09spi: ca_sflash: Add missing dm includeJohn Watts
This code uses dev_err which is defined in dm/device_compat.h Signed-off-by: John Watts <contact@jookia.org>
2024-10-09spi: mtk_spim: Remove completion.h includeJohn Watts
This created a conflict when linking. Signed-off-by: John Watts <contact@jookia.org>
2024-10-09spi: Kconfig: Add some required arch depends for driversJohn Watts
These dependencies are required for building the drivers and create compile errors if not enabled. Signed-off-by: John Watts <contact@jookia.org> [trini: Add ARCH_MVEBU to KIRKWOOD_SPI] Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-09Merge patch series "spi-nor: Add parallel and stacked memories support"Tom Rini
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> says: This series adds support for Xilinx qspi parallel and stacked memeories. In parallel mode, the current implementation assumes that a maximum of two flashes are connected. The QSPI controller splits the data evenly between both the flashes so, both the flashes that are connected in parallel mode should be identical. During each operation SPI-NOR sets 0th bit for CS0 & 1st bit for CS1 in nor->flags. In stacked mode the current implementation assumes that a maximum of two flashes are connected and both the flashes are of same make but can differ in sizes. So, except the sizes all other flash parameters of both the flashes are identical. Spi-nor will pass on the appropriate flash select flag to low level driver, and it will select pass all the data to that particular flash. Write operation in parallel mode are performed in page size * 2 chunks as each write operation results in writing both the flashes. For doubling the address space each operation is performed at addr/2 flash offset, where addr is the address specified by the user. Similarly for read and erase operations it will read from both flashes, so size and offset are divided by 2 and send to flash.
2024-10-09config: xilinx: Enable the SPI_ADVANCE config optionVenkatesh Yadav Abbarapu
Enable the SPI_ADVANCE config option for all xilinx platforms, as this is required for parallel-memories. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
2024-10-09spi: zynq_qspi: Add parallel memories support in QSPI driverVenkatesh Yadav Abbarapu
Add support for parallel memories in zynq_qspi.c driver. In case of parallel memories STRIPE bit is set and sent to the qspi ip, which will send data bits to both the flashes in parallel. However for few commands we should not use stripe, instead send same data to both the flashes. Those commands are exclueded by using zynqmp_qspi_update_stripe(). Also update copyright info for this file. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
2024-10-09spi: zynqmp_gqspi: Add parallel memories support in GQSPI driverVenkatesh Yadav Abbarapu
Add support for parallel memories in zynqmp_gqspi.c driver. In case of parallel memories STRIPE bit is set and sent to the qspi ip, which will send data bits to both the flashes in parallel. However for few commands we should not use stripe, instead send same data to both the flashes. Those commands are exclueded by using zynqmp_qspi_update_stripe(). Also update copyright info for this file. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
2024-10-09spi: spi-uclass: Read chipselect and restrict capabilitiesVenkatesh Yadav Abbarapu
Read chipselect properties from DT which are populated using 'reg' property and save it in plat->cs[] array for later use. Also read multi chipselect capability which is used for parallel-memories and return errors if they are passed on using DT but driver is not capable of handling it. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
2024-10-09mtd: spi-nor: Add parallel and stacked memories support in read_bar and ↵Ashok Reddy Soma
write_bar Add support for parallel memories and stacked memories configuration in read_bar and write_bar functions. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
2024-10-09mtd: spi-nor: Add parallel memories support for read_sr and read_fsrAshok Reddy Soma
Add support for parallel memories flash configuration in read status register and read flag status register functions. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
2024-10-09mtd: spi-nor: Add parallel and stacked memories supportVenkatesh Yadav Abbarapu
In parallel mode, the current implementation assumes that a maximum of two flashes are connected. The QSPI controller splits the data evenly between both the flashes so, both the flashes that are connected in parallel mode should be identical. During each operation SPI-NOR sets 0th bit for CS0 & 1st bit for CS1 in nor->flags. In stacked mode the current implementation assumes that a maximum of two flashes are connected and both the flashes are of same make but can differ in sizes. So, except the sizes all other flash parameters of both the flashes are identical Spi-nor will pass on the appropriate flash select flag to low level driver, and it will select pass all the data to that particular flash. Write operation in parallel mode are performed in page size * 2 chunks as each write operation results in writing both the flashes. For doubling the address space each operation is performed at addr/2 flash offset, where addr is the address specified by the user. Similarly for read and erase operations it will read from both flashes, so size and offset are divided by 2 and send to flash. Adding the config option SPI_ADVANCE for non SPL code. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
2024-10-09config: mx6sabresd: Default don't enable the flash lockVenkatesh Yadav Abbarapu
By default flash lock option is enabled, enable this option only when it is required. By disabling the lock config will save some amount of memory. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
2024-10-08arch: arm: dts: k3-j7200-r5-evm: Enable AVS featureUdit Kumar
During DT sync with kernel 6.6, AVS feature was removed by mistake. So adding back AVS feature. Fixes: df73e791ce09("arm: dts: j7200: dts sync with Linux 6.6-rc1") Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Aniket Limaye <a-limaye@ti.com>
2024-10-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-07cmd: Make bootvx independent of bootelfDaniel Palmer
There are lots of usecases for running baremetal ELF binaries via bootelf but if you enable bootelf you get bootvx as well and you probably don't want or need it. Hide bootvx behind it's own configuration option. Signed-off-by: Daniel Palmer <daniel@0x0f.com>
2024-10-07mkimage: ecdsa: add nodes to signature/key nodeMatthias Pritschet
Add the "required", "algo", and "key-name-hint" nodes to the signature/key node if ecdsa256 is used. This change is mainly copy&paste from rsa_add_verify_data which already adds these nodes. Signed-off-by: Matthias Pritschet <matthias.pritschet@itk-engineering.de>
2024-10-07mkimage: ecdsa: add signature/key nodes to dtb if missingMatthias Pritschet
If the signature/key node(s) are not yet present in the U-Boot device tree, ecdsa_add_verify_data simply fails if it can't find the nodes. This behaviour differs from rsa_add_verify_data, wich does add the missing nodes and proceeds in that case. This change is mainly copy&paste from rsa_add_verify_data to add the same behaviour to ecdsa_add_verify_data. Signed-off-by: Matthias Pritschet <matthias.pritschet@itk-engineering.de>
2024-10-07configs: am64x*_r5_defconfig: Drop BOOTCOMMANDWadim Egorov
There is no need to define a default for bootcmd in R5 u-boot because the R5 is directly booting into the next stage A53 bootloader. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-10-07serial: ns16550: Try get serial clock rate from DT before CLKJonas Karlman
Initializing a clock driver to read a known static clock rate can take some time at U-Boot proper pre-reloc phase. Change to first try and read clock rate from DT to speed up boot time, fall back to getting the clock rate from clock driver. This help reduce boot time by around: - ~35ms on a Radxa ROCK Pi 4 (RK3399) - ~15ms on a Radxa ZERO 3W (RK3566) Time that is wasted getting a static rate known at compile time. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2024-10-07pinctrl: mediatek: Bind gpio while binding pinctrlChris Webb
Mediatek pinctrl drivers call mtk_gpiochip_register() to bind the child gpio controller as part of mtk_pinctrl_common_probe(). This breaks gpiohog support because the gpio controller is bound too late for DM_FLAG_PROBE_AFTER_BIND (set while binding hogs) to work. Move the mtk_gpiochip_register() to mtk_pinctrl_common_bind() and call this as the .bind method of each of the mediatek pinctrl drivers. Signed-off-by: Chris Webb <chris@arachsys.com>
2024-10-07Merge branch 'next'Tom Rini
2024-10-07Prepare v2024.10v2024.10Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-05clk: renesas: rcar-gen3: Fix SSCG caching replacement with MDSEL/PE cachingMarek Vasut
The SSCG is active with MDSEL[12] is not set. Previous commit 99c7e031196d ("clk: renesas: rcar-gen3: Replace SSCG caching with MDSEL/PE caching") inverted the conditional assignment of priv->sscg = !(cpg_mode & BIT(12)) during conversion from (priv->sscg ? 16 : 0) to priv->cpg_mode & BIT(core->offset) ? 16 : 0; Invert the assignment back to the correct state. This fixes R8A77980, R8A77990, R8A77995 and R8A774C0. Fixes: 99c7e031196d ("clk: renesas: rcar-gen3: Replace SSCG caching with MDSEL/PE caching") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-10-05Merge branch 'u-boot-nand-20241005' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-nand-flash into next These are a number of assorted upstream Linux fixes to the BRCMNAND driver. This patch set lowers the hamming distance between the Linux and U-Boot drivers a bit as well, while we deviate quite a bit it is still possible to bring fixes over thanks to exercises like this. The patches pass the pipeline CI: https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/22535
2024-10-05mtd: rawnand: brcmnand: Add support for getting ecc setting from strapWilliam Zhang
Backport from the upstream Linux kernel commit c2cf7e25eb2a3c915a420fb8ceed8912add7f36c "mtd: rawnand: brcmnand: Add support for getting ecc setting from strap" Note: the upstream kernel introduces a new bool brcmnand_get_sector_size_1k() function because the int version in U-Boot has been removed in Linux. I kept the old int-returning version that is already in U-Boot as we depend on that in other code. BCMBCA broadband SoC based board design does not specify ecc setting in dts but rather use the SoC NAND strap info to obtain the ecc strength and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for this purpose and update driver to support this option. However these two options can not be used at the same time. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240301173308.226004-1-william.zhang@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: William Zhang <william.zhang@broadcom.com> Tested-by: William Zhang <william.zhang@broadcom.com>
2024-10-05mtd: rawnand: brcmnand: Support write protection setting from dtsWilliam Zhang
Backport of upstream Linux commit 8e7daa85641c9559c113f6b217bdc923397de77c "mtd: rawnand: brcmnand: Support write protection setting from dts" Augmented to also support the "write-protect" boolean property. The write protection feature is controlled by the module parameter wp_on with default set to enabled. But not all the board use this feature especially in BCMBCA broadband board. And module parameter is not sufficient as different board can have different option. Add a device tree property and allow this feature to be configured through the board dts on per board basis. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-14-william.zhang@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: William Zhang <william.zhang@broadcom.com>
2024-10-05mtd: rawnand: brcmnand: Add read data bus interfaceLinus Walleij
This is a port of the read data bus interface from the Linux brcmnand driver, commit 546e425991205f59281e160a0d0daed47b7ca9b3 "mtd: rawnand: brcmnand: Add BCMBCA read data bus interface" This is needed for the BCMBCA RAW NAND driver. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: William Zhang <william.zhang@broadcom.com>
2024-10-05mtd: rawnand: brcmnand: Fix mtd oobsizeWilliam Zhang
Backport from upstream Linux commit 60177390fa061c62d156f4a546e3efd90df3c183 "mtd: rawnand: brcmnand: Fix mtd oobsize" brcmnand controller can only access the flash spare area up to certain bytes based on the ECC level. It can be less than the actual flash spare area size. For example, for many NAND chip supporting ECC BCH-8, it has 226 bytes spare area. But controller can only uses 218 bytes. So brcmand driver overrides the mtd oobsize with the controller's accessible spare area size. When the nand base driver utilizes the nand_device object, it resets the oobsize back to the actual flash spare aprea size from nand_memory_organization structure and controller may not able to access all the oob area as mtd advises. This change fixes the issue by overriding the oobsize in the nand_memory_organization structure to the controller's accessible spare area size. Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-6-william.zhang@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: William Zhang <william.zhang@broadcom.com>
2024-10-05mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob writeWilliam Zhang
Backport of upstream Linux commit 5d53244186c9ac58cb88d76a0958ca55b83a15cd "mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write" When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-5-william.zhang@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: William Zhang <william.zhang@broadcom.com>
2024-10-05mtd: rawnand: brcmnand: Fix potential false time out warningWilliam Zhang
Backport from the Linux kernel: commit 9cc0a598b944816f2968baf2631757f22721b996 "mtd: rawnand: brcmnand: Fix potential false time out warning" If system is busy during the command status polling function, the driver may not get the chance to poll the status register till the end of time out and return the premature status. Do a final check after time out happens to ensure reading the correct status. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-3-william.zhang@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: William Zhang <william.zhang@broadcom.com>
2024-10-05mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controllerWilliam Zhang
Backport from the Linux kernel commit 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b "mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller" v7.2 controller has different ECC level field size and shift in the acc control register than its predecessor and successor controller. It needs to be set specifically. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: William Zhang <william.zhang@broadcom.com>
2024-10-05Merge tag 'u-boot-imx-next-20241005' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22526 - Add DA9063 watchdog support for the imx6q-lxr2 board. - Add support for DH electronics i.MX8M Plus DHCOM PicoITX - Add DH i.MX8MP DHCOM SoM on DRC02 carrier board - Several fsl_esdhc_imx improvements. - Pas no-mmc-hs400 to mmc2 on imx8mm-cl-iot-gate.
2024-10-04Merge branch 'qcom-next' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-snapdragon into next * Initial UFS PHY driver * Support for SM8150 (clock and pinctrl) * Allow writing configuration to PMIC GPIOs again * Support for configuring "special" pins (e.g. UFS reset or sdhc pins) * Support for "clk dump" command to decode various clocks.
2024-10-04Update directories for new name of TF-A directoriesPeter Robinson
The TF-A URL was updated, as a result the name of the directory changed as part of the new git URL and not all the referenced directories were updated. Fixes: 0ec0207fe07 ("Update the ARM trusted firmware git URL") Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2024-10-04rockchip: Provid SPL control over otp presenceJonas Karlman
The series "rockchip: Add efuse and otp support to more SoCs" [1], merged in v2023.04, refactored and extended the Rockchip efuse and otp driver to support reading eFUSE/OTP for all supported Rockchip SoCs. Due to use of different licenses the drivers were never combined into a single driver, however anything non SoC specific should be applied to both drivers. The commit fe38b88453d2 ("rockchip: Provided SPL control over efuse presence") changed Makefile options for only one of the two drivers, apply same change to keep these two drivers in sync. [1] https://lore.kernel.org/r/20230222224436.1570224-1-jonas@kwiboo.se/ Fixes: fe38b88453d2 ("rockchip: Provided SPL control over efuse presence") Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2024-10-04clk/qcom: sm8250: add debug dataCaleb Connolly
Drop in the RCG and GPLL data for debugging these clocks. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-10-04clk/qcom: sm6115: add debug dataCaleb Connolly
Add "clk dump" support for SM6115. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-10-04clk/qcom: sdm845: add dump dataCaleb Connolly
Add debug data to dump PLL and RCG clocks. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-10-04clk/qcom: implement clk dumpCaleb Connolly
Add support for dumping a few of the clocks used on Qualcomm platforms. Naming the Global PLL's, Root Clock Generators, and gate clocks. This helps a lot with platform bringup and feature enablement by making it easy to sanity check that the clocks are programmed correctly. == Usage == Enable CONFIG_CMD_CLK and "#define LOG_DEBUG" at the top of qcom-<soc>.c. The "clk dump" command should print the states of all the gates, GPLLs and RCGs for your SoC. == Glossary == RCG: Root Clock Generator * Takes in some fairly arbitrary high freq clock (configurable clock source and options for taking just even pulses and other things) * Output frequency = input_freq * (m/n) * (1/d) where m/n are arbitrary 8 or 16-bit values (depending on the RCG), and d is a number (with support for .5 offsets). GPLL: Global Phase Locked Loop * Crystal as input * integer multiplier + exponent part (2^-40) Gate: Simple on/off clock * Put between RCGs and the peripherals they power * Required to allow for correct power sequencing If you do the maths manually using the equations from "clk dump", the numbers should roughly line up by they're likely to be out by a handful of MHz. They output is formatted so that it can be pasted directly into the python interpreter. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-10-04Revert "gpio: qcom_pmic: add a quirk to skip GPIO configuration"Caleb Connolly
This reverts commit 19f000b72b2fa7e4540f7cdb91287aff594239bd. The bug in writing was caused by a long-standing error in the SPMI driver which has since been fixed - c2de620d64d4 ("spmi: msm: fix version 5 support"). We can safely enable writing GPIO configuration now. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-10-04pinctr: qcom: sm8250: add special pins pins configuration dataNeil Armstrong
Add the special pins configuration data to allow setup the bias of the UFS and SDCard pins on the SM8250 SoC. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-10-04gpio: msm: add support for special pinsNeil Armstrong
Leverage the data introduced in the struct msm_special_pin_data to allow setting the gpio direction and value if supported by the pin data. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-10-04phy: qcom: Add QMP UFS PHY driverBhupesh Sharma
Add Qualcomm QMP UFS PHY driver which is available on the following Snapdragon SoCs - SDM845, SM8250, SM8550 and SM8650 SoCs. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-10-04phy: qcom: Import QMP phy related header files from LinuxBhupesh Sharma
Import Qualcomm QMP phy related header files from Linux v6.11-rc7, limit to headers needed to setup QMP v2 to v6 UFS PHYs. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 23:25:36 +0000