summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-09configs: stm32mp1: Remove misleading CONFIG_SPL_BSS_START_ADDRAlexandru Gagniuc
CONFIG_SPL_BSS_START_ADDR is only used on a few mach- linker scripts. stm32mp1 uses the generic script under arch/arm/cpu/u-boot-spl.lds, which does not make use of this definition. The SPL BSS starts in SRAM, right after .text, .rodata, .data, and .u_boot_list. A very short version of the STM32MP1 memory map is: * SYSRAM: 2ffc0000 - 30000000 <- all of SPL is here * DRAM: c0000000+ 0xC0200000 is a DRAM address, and has nothing to do with SPL. It is just very misleading to have it next to CONFIG_SPL_BSS_MAX_SIZE, or to have it at all. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-09configs: stm32mp1: stm32mp1: Increase SPL malloc() sizeAlexandru Gagniuc
Since commit 03f1f78a9b44 ("spl: fit: Prefer a malloc()'d buffer for loading images"), FIT images must be malloc()'d before being loaded. The old size of 1 MiB is suitable for FIT images with u-boot and an FDT, but something containing a linux kernel is almost sure to fail. It's safe to extend malloc all the way to 0xc2000000, but no further. Linux likes to be loaded at 0xc2000000, so we use that as our cutoff point. This gives us 29 MiB of malloc() space, which suited for more complex FIT images including several DTBs, kernel, and OP-TEE images. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-09stm32mp1: remove the board_check_usb_power function when ADC is not activatedPatrick Delaunay
Simplify the code of the function board_check_usb_power based in CONFIG_ADC and adc_measurement; the function is removed by the linker when the CONFIG_ADC is not activated. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-09stm32mp: replace printf by log macro in setup_boot_modePatrick Delaunay
Replace the remaining printf in setup_boot_mode() by log macro to handle filtering for log features. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09stm32mp: update uart number in trace of serial device not foundPatrick Delaunay
Align the uart number in the trace of setup_boot_mode() with the name of the uart/usart device (start at 1) and not with the instance value (start at 0), i.e. the serial device sequence number and the index in serial_addr[]. Fixes: f49eb16c17e2c ("stm32mp: stm32prog: replace alias by serial device sequence number") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09stm32mp: stm32prog: add FIP header supportPatrick Delaunay
Add support of TF-A FIP header in command stm32prog for all the boot partition and not only the STM32IMAGE. This patch is a preliminary patch to support FIP as second boot stage after TF-A BL2 when CONFIG_TFABOOT is activated for trusted boot chain. The FIP is archive binary loaded by TF-A BL2, which contains the secure OS = OP-TEE and the non secure firmware and device tree = U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OFJagan Teki
7" OF is a capacitive touch 7" Open Frame panel solutions with - 7" AUO B101AW03 LVDS panel - EDT, FT5526 Touch MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7" Open Frame Solution board. Linux dts commit details: commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 boardJagan Teki
MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. Genaral features: - Ethernet 10/100 - USB Type A - Audio Out - microSD - LVDS panel connector - Wifi/BT (option) - UMTS LTE with sim connector (option) MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board. Linux dts commit details: commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoMJagan Teki
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. General features: - STM32MP157AAC - Up to 1GB DDR3L-800 - 512MB Nand flash - I2S MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier boards for creating complete platform solutions. Linux dts commit details: commit <0be81dfaeaf8> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 SoM") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0Jagan Teki
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Carrier board for creating complete i.Core STM32MP1 C.TOUCH 2.0 board. Linux dts commit details: commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter KitJagan Teki
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Evaluation board for creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit. Linux dts commit details: commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09ARM: stm32: Imply SPL_SPI_LOADJagan Teki
SPI Load isn't mandatory for STM32 builds. Let's imply instead of select it to get rid of build issues for non-SPI defconfigs. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3Jagan Teki
Engicam i.Core STM32MP1 SODIMM SoM has mounted 1x4Gb DDR3 which has 32bits width 528000Khz frequency. Add DDR configuration via dtsi. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoMJagan Teki
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. General features: - STM32MP157A - Up to 1GB DDR3L - 4GB eMMC - 10/100 Ethernet - USB 2.0 Host/OTG - I2S - MIPI DSI to LVDS - rest of STM32MP157A features i.Core STM32MP1 needs to mount on top of Engicam baseboards for creating complete platform solutions. Linux commit details: commit <30f9a9da4ee1> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: Add rt-thread art-pi board supportdillon min
All these files are add for support rt-thread art-pi board - add board/st/stm32h750-art-pi, defconfig, header support for u-boot for more information about art-pi, please goto: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ram: stm32: fix strsep failed on read only memorydillon min
strsep will change data from original memory address, in case the memory is in non-sdram/sram place, will run into a bug(hang at SDRAM: ) just add a temporary array to store bank_name[] to fix this bug. Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6dillon min
This patchset has following changes: - introduce stm32h750.dtsi to support stm32h750 value line - add pin groups for usart3/uart4/spi1/sdmmc2 - add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile) - add stm32h750i-art-pi.dts to support art-pi board - add stm32h750i-art-pi-u-boot.dtsi to support art-pi board (u-boot) art-pi board component: - 8MiB qspi flash - 16MiB spi flash - 32MiB sdram - ap6212 wifi&bt&fm the detail board information can be found at: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 registerdillon min
Replace upper case by lower case in i2c nodes name. update dmamux1 register range. Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: add new instances for stm32h743 MCUdillon min
Some instances are missing in current support of stm32h743 MCU. This commit adds usart3/uart4 and sdmmc2 support. Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750dillon min
This patch is intend to add support stm32h750 value line, just add stm32h7-pinctrl.dtsi for extending, with following changes: - rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi - move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi - update stm32h743i-{disco, eval}.dts to include stm32h7-pinctrl.dtsi Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: split sdram pin & timing parameter into specific board dtsdillon min
As different boards has their own sdram hw connection, mount different sdram modules, so move sdram timing parameter and pin configuration to their board device tree. Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-05Prepare v2021.04v2021.04Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-05imx8mn_ddr4_evk: Allow booting the kernel by defaultFabio Estevam
Currently it is not possible to boot Linux from the SD card by default. Make the necessary adjustments to allow it. Reported-by: Peter Bergin <peter@berginkonsult.se> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andrey Zhizhikin <andrey.z@gmail.com> # imx8mn_ddr4_evk Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-04-04sphinx: Pin to docutils-0.16Tom Rini
In newer docutils writers/latex2e/docutils.sty has a unicode character in the comments which can in turn cause Python 3.6 at least to fail. Pin to the previous docutils release for now. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-04cmd: CMD_USB depends on USBHeinrich Schuchardt
The usb command cannot be compiled with CONFIG_USB=n: ld.bfd: cmd/usb.c:660: undefined reference to `usb_stop' ld.bfd: cmd/usb.c:663: undefined reference to `usb_started' Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-01Makefile: Silence the deprecation scriptSimon Glass
This bash code is currently showing up in the build unless 'make -s' is used. We don't normally show these sorts of things as they are confusing. Also this code was not shown before the recent refactoring of how these messages are displayed. Add an '@' to silence it. Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Bin Meng <bmeng.cn@gmail.com> Fixes: 13732528516 ("Makefile: Add common code to report deprecation")
2021-03-31Merge tag 'efi-2021-04-rc6' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-04-rc6 Bug fix: Fix ConvertDeviceNodeToText() for Uart()
2021-03-31test: Don't unmount not (yet) mounted systemAndy Shevchenko
When test suite tries to create a file for a new filesystem test case and fails, the clean up of the exception tries to unmount the image, that has not yet been mounted. When it happens, the fuse_mounted global variable is set to False and inconveniently the test case tries to use sudo, so without this change the admin of the machine gets an (annoying) email: Subject: *** SECURITY information for example.com *** example.com : Feb 5 19:43:47 : ... COMMAND=/bin/umount .../build-sandbox/persistent-data/mnt and second run of the test cases on uncleaned build folder will ask for sudo which is not what expected. Besides that there is a double unmount calls during successfully run test case. All of these due to over engineered Python try-except clause and people didn't get it properly at all. The rule of thumb is that don't use more keywords than try-except in the exception handling code. Nevertheless, here we adjust code to be less intrusive to the initial logic behind that complex and unclear constructions in the test case, although it adds a lot of lines of the code, i.e. splits one exception handler to three, so on each step we know what cleanup shall perform. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-31Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- H616 fixes to keep it in sync with upstream TF-A
2021-03-31sunxi: dts: H616: Drop reserved-memory nodeAndre Przywara
Trusted Firmware now adds the /reserved-memory subnode to the DT at runtime[1], putting in the right values. Drop our hard-coded version, as this might clash with the actual values (which have also changed), and rely on TF-A to add the node. [1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7770 Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-03-31sunxi: H616: Change TF-A load address to beginning of DRAMAndre Przywara
Loading Trusted-Firmware's BL31 at 16KB into DRAM was originally a hack to allow sharing more code with the other SoCs (which use this offset in SRAM). However there is no longer a reason for that, as the problematic macros have been properly separated there. The latest (and hopefully final) TF-A code drop now changes the load address to the beginning of DRAM, which is also more easily protected by the Trustzone memory controller (code to be done). Adjust the load address of BL31 now, to avoid any issues with incompatible versions later on (the TF-A patches are about to be merged). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org>
2021-03-31efi_loader: typo 'devide path'Heinrich Schuchardt
Fix a typo in helloworld.efi. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-31efi_loader: Uart device path missing breakHeinrich Schuchardt
In the devicepath node to text conversion for Uart nodes a break statement is missing. Indicated by Coverity Scan CID 330038 Fixes: 62df6e9c9994 ("efi_loader: Uart device path") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-29Prepare v2021.04-rc5v2021.04-rc5Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-28Merge branch '2021-03-28-assorted-bugfixes'Tom Rini
2021-03-28Support building on macOS/arm64Jessica Clarke
On Arm-based Macs, -no_pie is ignored and gives a linker warning. Moreover, the build falls over with: ld: Absolute addressing not allowed in arm64 code but used in '_image_type_ptr_aisimage' referencing '_image_type_aisimage' for dumpimage and mkimage, since we put data structs in text sections not data sections and so cannot have dynamic relocations. Instead, move the sections to __DATA and drop disabling PIE. Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-03-28dm: test: Always include command.h for print_utSean Anderson
We need this header for U_BOOT_CMD, which is always present even without EFI. Fixes: 82c468a049 ("dm: test: Update Makefile conditions") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-28test: Add udevice declaration to avoid build errorSimon Glass
When including this file on a board other than sandbox (e.g by enabling UNIT_TEST and CMD_SETEXPR) an results. Fix it by declaring struct udevice first. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-27Merge branch '2021-03-27-master-imports'Tom Rini
- Rework the deprecation warnings to be consistently phrased. - Add in a warning for DM_I2C, for a year from next release. - Fix Azure builds of Windows host tools.
2021-03-27Azure: Use "pacman -Sy" to install the toolchainTom Rini
We now see an error such as: warning: database file for 'ucrt64' does not exist (use '-Sy' to download) error: failed to prepare transaction (could not find database) So use -Sy as suggested. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-03-27dm: i2c: Add a migration method for I2CSimon Glass
This probably should have been done a while back since it is a core system. Add a migration deadline of later this year, to catch the stragglers. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Drop the old SPI flash migration messageSimon Glass
This message does not seem to make sense. It may be out of date. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Use common code for DM_ETH deprecation warningSimon Glass
Update the CONFIG_DM_ETH check to use the 'deprecated' function. Tested with snow Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Use common code for WDT deprecation warningSimon Glass
Update the CONFIG_WDT check to use the 'deprecated' function. Tested with kmcent2 Old message: ===================== WARNING ====================== This board does not use CONFIG_WDT (DM watchdog support). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_WDT (Driver Model for DM watchdog). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Use common code for SPI_FLASH deprecation warningSimon Glass
Update the CONFIG_DM_SPI_FLASH check to use the 'deprecated' function. Tested with vinco Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH (Driver Model for SPI flash). Please update the board to use CONFIG_DM_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Use common code for DM_VIDEO deprecation warningSimon Glass
Update the CONFIG_DM_VIDEO check to use the 'deprecated' function. Tested with pxm2 Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_VIDEO Please update the board to use CONFIG_DM_VIDEO before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_VIDEO (Driver Model for video). Please update the board to use CONFIG_DM_VIDEO before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ================================================== Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Use common code for PCI deprecation warningSimon Glass
Update the CONFIG_DM_PCI check to use the 'deprecated' function. Tested with MPC8349ITX Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_PCI Please update the board to use CONFIG_DM_PCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_PCI (Driver Model for PCI). Please update the board to use CONFIG_DM_PCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Use common code for LIBATA deprecation warningSimon Glass
Update the CONFIG_LIBATA check to use the 'deprecated' function. Tested with MPC8349ITX Old message: ===================== WARNING ====================== This board does use CONFIG_LIBATA but has CONFIG_AHCI not enabled. Please update the storage controller driver to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_AHCI (Driver Model for AHCI). Please update the board to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Use common code for MVSATA_IDE deprecation warningSimon Glass
Update the CONFIG_MVSATA_IDE check to use the 'deprecated' function. Tested with nas220 Old message: ===================== WARNING ====================== This board does use CONFIG_MVSATA_IDE which is not ported to driver-model (DM) yet. Please update the storage controller driver to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_AHCI (Driver Model for AHCI instead of CONFIG_MVSATA_IDE). Please update the board to use CONFIG_AHCI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27Makefile: Use common code for USB deprecation warningSimon Glass
Update the USB check to use the 'deprecated' function. Tested with xpress Old message: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== New message: ===================== WARNING ====================== This board does not use CONFIG_DM_USB (Driver Model for USB). Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-10-26 18:35:05 +0000