summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-08common/spl/Kconfig: add dependency on SPL_SEMIHOSTING for SPL payloadKautuk Consul
When we enable CONFIG_SPL and CONFIG_SPL_SEMIHOSTING then the code in common/spl/spl_semihosting.c tries to use the CONFIG_SPL_FS_LOAD_PAYLOAD_NAME string which remains undeclared unless SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS are configured. Add a dependency of SPL_SEMIHOSTING in the depends for SPL_FS_LOAD_PAYLOAD_NAME so that the code compiles fine. Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-08arch/riscv: add semihosting support for RISC-VKautuk Consul
We add RISC-V semihosting based serial console for JTAG based early debugging. The RISC-V semihosting specification is available at: https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-08lib: Add common semihosting libraryKautuk Consul
We factor out the arch-independent parts of the ARM semihosting implementation as a common library so that it can be shared with RISC-V. Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-12-07ARM: stm32: Increment WDT by default on DHSOMMarek Vasut
Enable watchdog timer on the DHSOM by default, both in U-Boot proper and in SPL. This can be used in combination with boot counter by either SPL or U-Boot proper to boot either copy of system software, e.g. in case of full A/B update strategy. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-07ARM: stm32: Increment boot counter in SPL on DHSOMMarek Vasut
Increment the boot counter already in U-Boot SPL instead of incrementing it only later in U-Boot proper. This can be used by SPL to boot either of two U-Boot copies and improve redundancy of software on the platform, e.g. in case of full A/B update strategy. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-07ARM: stm32: Enable assorted ST specific commands on DHSOMMarek Vasut
Enable the stm32prog, stm32key, stboard commands on DHSOM. Those can be used e.g. to implement verified boot. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-07ARM: stm32: Add version variable to DHSOMMarek Vasut
Enable insertion of version variable into U-Boot environment on DHSOM, to make it possible to check U-Boot version e.g. in U-Boot scripts. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07ARM: stm32: Add boot counter to DHSOMMarek Vasut
Add boot counter to STM32MP15xx DHSOM. This aligns the software with other upstream DHSOM products which already do enable boot counter. The boot counter on STM32MP15xx is placed in the TAMP block TAMP_BKPxR register 19, right past register 17 and 18 used for CM4 resource table and state by the Linux kernel. The TAMP_BKPxR register block is used because its contents survives warm reset, but not cold reset. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07ARM: dts: stm32: Drop MMCI interrupt-namesMarek Vasut
The pl18x MMCI driver does not use the interrupt-names property, the binding document has been updated to recommend this property be unused, remove it. Backport of Marek's Linux patch: https://lore.kernel.org/linux-arm-kernel/20221013221242.218808-3-marex@denx.de/ Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Yann Gautier <yann.gautier@foss.st.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07ARM: dts: stm32: add sdmmc cd-gpios for STM32MP135F-DKYann Gautier
On STM32MP135F-DK, the SD card detect GPIO is GPIOH4. Backport of the Linux patch: https://lore.kernel.org/linux-arm-kernel/20220921160334.3227138-1-yann.gautier@foss.st.com/ Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-12-07adc: stm32mp15: add support of generic channels bindingOlivier Moysan
Add support of generic IIO channels binding: ./devicetree/bindings/iio/adc/adc.yaml Keep support of st,adc-channels for backward compatibility. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07adc: stm32mp15: split channel init into several routinesOlivier Moysan
Split stm32_adc_chan_of_init channel initialization function into several routines to increase readability and prepare channel generic binding handling. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07arm: dts: stm32mp13: add support of RCC driverGabriel Fernandez
Adds support of Clock and Reset drivers for STM32MP13 platform. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07clk: stm32mp13: introduce STM32MP13 RCC driverGabriel Fernandez
STM32MP13 RCC driver uses Common Clock Framework and also a 'clk-stm32-core' API. Then STM32MPx RCC driver will contain only data configuration (gates, mux, dividers and the way to check security) or some specific clocks. This API will be used by all new other generations of ST Socs. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Tested-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-07dt-bindings: stm32mp13: add clock & reset support for STM32MP13Gabriel Fernandez
Add support of stm32mp13 DT bindings of clock and reset. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-12-06Merge tag 'sound-2023-01-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for sound-2023-01-rc4 * Avoid endless loop and amend unit test * Add man-page for the sound command * Fix sandbox sound driver
2022-12-05Prepare v2023.01-rc3v2023.01-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Merge branch '2022-12-05-add-IPv6-support'Tom Rini
To quote the author: This patch set adds basic IPv6 support to U-boot. It is based on Chris's Packham patches (https://lists.denx.de/pipermail/u-boot/2017-January/279366.html) Chris's patches were taken as base. There were efforts to launch it on HiFive SiFive Unmatched board but the board didn't work well. The code was refactored, fixed some bugs as CRC for little-endian, some parts were implemented in our own way, something was taken from Linux. Finally we did manual tests and the board worked well. Testing was done on HiFive SiFive Unmatched board (RISC-V)
2022-12-05configs: Add IPV6 config to sandbox_flattree_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05configs: Add IPV6 config to sandbox64_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05configs: Add IPV6 config to sandbox_defconfigViacheslav Mitrofanov
Allow to use IPV6 tests in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-05test: dm: eth: Add ip6_make_lladdr testViacheslav Mitrofanov
Add a test that checks generated Link Local Address. Use in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: dm: eth: Add ip6_make_snma testViacheslav Mitrofanov
Add a test that checks generated Solicited Node Multicast Address from our ipv6 address. Use in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: dm: eth: Add ip6_addr_in_subnet testViacheslav Mitrofanov
Add a test if two address are in the same subnet. Use in sandbox Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: dm: eth: Add csum_ipv6_magic testViacheslav Mitrofanov
Test checksum computation. csum_ipv6_magic() uses in upper layer protocols as TCP/UDP/ICMPv6/etc to calculate payload checksum. Series-changes: 3 - Fixed style problems Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: dm: eth: Add string_to_ip6 testViacheslav Mitrofanov
Add a test to check convertation from char* to struct in6_addr. Use in sandbox Series-changes: 3 - Fixed tests to use length param in string_to_ip6() Series-changes: 5 - Add test under #ifdef Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ping6: Add ping6 commandViacheslav Mitrofanov
Implement ping6 command to ping hosts using IPv6. It works the same way as an ordinary ping command. There is no ICMP request so it is not possible to ping our host. This patch adds options in Kconfig and Makefile to build ping6 command. Series-changes: 3 - Added structures and functions descriptions - Added to ping6_receive() return value instead of void Series-changes: 4 - Fixed structures and functions description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: tftp: Add IPv6 support for tftpbootViacheslav Mitrofanov
The command tftpboot uses IPv4 by default. Add the possibility to use IPv6 instead. If an address in the command is an IPv6 address it will use IPv6 to boot or if there is a suffix -ipv6 in the end of the command it also force using IPv6. All other tftpboot features and parameters are left the same. Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Incorporate IPv6 support into u-boot net subsystemViacheslav Mitrofanov
Add net_ip6_handler (an IPv6 packet handler) into net_loop. Add neighbor discovery mechanism into network init process. That is the main step to run IPv6 in u-boot. Now u-boot is capable to use NDP and handle IPv6 packets. Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add implementation of main IPv6 functionsViacheslav Mitrofanov
Functions that were exposed in "net: ipv6: Add IPv6 basic primitives" had only empty implementations and were exposed as API for futher patches. This patch add implementation of these functions. Main functions are: net_ip6_handler() - IPv6 packet handler for incoming packets; net_send_udp_packet6() - make up and send an UDP packet; csum_ipv6_magic() - compute checksum of IPv6 "psuedo-header" per RFC2460 section 8.1; ip6_addr_in_subnet() - check if an address is in our subnet. Other functions are auxiliary. Series-changes: 3 - Added comments - Fixed style problems - Fixed return codes instead of -1 Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add ip6addr, gatewayip6, serverip6 variables callbacksViacheslav Mitrofanov
Implement actions on ip6addr, gatewayip6, serverip6 varaibles. on_ip6addr - convert IPv6 string addr to struct ip6_addr on_gatewayip6 - convert IPv6 string addr to struct ip6_addr on_serverip6 - convert IPv6 string addr to struct ip6_addr Series-changes: 3 - Removed memory allocation - Substituted -1 for error code Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Enable IPv6 typeconversion specifierViacheslav Mitrofanov
Add the possibility to recognize IPv6 address in print function. To output IPv6 address use %pI6 specifier. Series-changes: 3 - Substituted #if (...) for if (...) to get better readability Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add string_to_ip6 converterViacheslav Mitrofanov
This functions is used as a converter from IPv6 address string notation to struct ip6_addr that is used everywhere in IPv6 implementation. For example it is used to parse and convert IPv6 address from tftpboot command. Conversion algorithm uses two passes, first to verify syntax and locate colons and second pass to read the address. In case of valid IPv6 address it returns 0. Examples of valid strings: 2001:db8::0:1234:1 2001:0db8:0000:0000:0000:0000:1234:0001 ::1 ::ffff:192.168.1.1 Examples of invalid strings 2001:db8::0::0 (:: can only appear once) 2001:db8:192.168.1.1::1 (v4 part can only appear at the end) 192.168.1.1 (we don't implicity map v4) Series-changes: 3 - Added function description - Added length parameter to string_to_ip6() Series-changes: 4 - Fixed function description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add Neighbor Discovery Protocol (NDP)Viacheslav Mitrofanov
Implement basic of NDP. It doesn't include such things as Router Solicitation, Router Advertisement and Redirect. It just has Neighbor Solicitation and Neighbor Advertisement. Only these two features are used in u-boot IPv6. Implementation of some NDP functions uses API that was exposed in "net: ipv6: Add IPv6 basic primitives". Also this patch inlcudes update in Makefile to build NDP. Series-changes: 3 - Added structures and functions descriptions - Fixed style problems Series-changes: 4 - Fixed structures and functions description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add callbacks declarations to get access to IPv6 variablesViacheslav Mitrofanov
Set up callbacks for main IPv6 variables ip6add, serverip6, gatewayip6 and set options to them in flag file. These variables are often set up by users. Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add IPv6 build optionsViacheslav Mitrofanov
Add options to Makefile and Kconfig file to build IPv6 Series-changes: 3 - Added help for IPv6 support Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05net: ipv6: Add IPv6 basic primitivesViacheslav Mitrofanov
This patch is a collection of basic primitives that are prerequisite for further IPv6 implementation. There are structures definition such as IPv6 header, UDP header (for TFTP), ICMPv6 header. There are auxiliary defines such as protocol codes, padding, struct size and etc. Also here are functions prototypes and its empty implementation that will be used as API for further patches. Here are variables declaration such as IPv6 address of our host, gateway, ipv6 server. Series-changes: 3 - Added functions and structures descriptions - Removed enums ND_OPT_*. It will be moved into further patches - Substituted -1 for error codes Series-changes: 4 - Changed functions and structures description style Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05sandbox: fix sound driverHeinrich Schuchardt
In the callback function we have to use memcpy(). Otherwise we add the new samples on top of what is stored in the stream buffer. If we don't have enough data, zero out the rest of the stream buffer. Our sampling frequency is 48000. Let the batch size for the callback function be 960. If we play a multiple of 20 ms, this will always be a full batch. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05doc: man-page for the sound commandHeinrich Schuchardt
Provide a man-page for the sound command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05cmd: fix long text for sound commandHeinrich Schuchardt
Make it clear that if only 1 parameter is provided this is the duration. The ISO symbol for hertz is Hz. Fixes: c0c88533fffd ("Sound: Add command for audio playback") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05test: test sandbox sound driver more rigorouslyHeinrich Schuchardt
Consider unexpected values for frequency: * negative frequency * zero frequency * frequency exceeding sampling frequency As in these cases the sum of the samples is zero also check the count of the samples. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05sound: avoid endless loopHeinrich Schuchardt
'sound play 1 100000' results in an endless loop on the sandbox. If the frequency exceeds half the sampling rate, zero out the output buffer. Fixes: 511ed5fdd389 ("SOUND: SAMSUNG: Add I2S driver") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Merge tag 'xilinx-for-v2023.01-rc3-v2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2023.01-rc3-v2 xilinx: - Fix MAC address selection for System Controller from FRU - Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol) versal: - Create u-boot.elf for mini spi configurations versal-net: - Enable MT35XU flash zynq: - Add missing timer to DT for mini configurations zynqmp: - Do not include psu_init to U-Boot by default - Do not enable IPI by default to mini U-Boot - Update Luca's fragment - Fix SPL_FS_LOAD_PAYLOAD_NAME usage spi: - gqspi: Fix tapdelay values - gqspi: Fix 64bit address support - cadence: Remove condition for calling enable linear mode - nor-core: Invert logic to reflect sst26 flash unlocked net: - Add PCS/PMA phy support
2022-12-05Merge tag 'i2cfixes-for-v2023.01-rc3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-i2c i2c Fixes for v2023.01-rc3 - nuovoton driver: rename npcm_i2c -> npcm-i2c from Jim Liu
2022-12-05mtd: spi-nor-core: Invert logic to reflect sst26 flash unlockedAlgapally Santosh Sagar
flash_is_locked is changed to flash_is_unlocked with commit 513c6071ce73 ("mtd: spi: Convert is_locked callback to is_unlocked"). sst26_is_locked() is also changed to sst26_is_unlocked() but the logic remained same. Invert the logic for the flash lock/unlock to work properly. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20221122051833.13306-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05xilinx: zynqmp: Fix SPL_FS_LOAD_PAYLOAD_NAME usageMichal Simek
SPL_FS_LOAD_PAYLOAD_NAME depends on SPL to be enabled. If SPL is not enabled code still expects SPL_FS_LOAD_PAYLOAD_NAME to be present. That's why setup proper dependency in the code. And by doing so also change the logic around dfu_alt_info string composition to be simpler. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3989c390a4acae13a1b05c040e14fb3d68bced02.1669986373.git.michal.simek@amd.com
2022-12-05arm64: versal-net: Enable defconfig for Micron octal flashesAshok Reddy Soma
Micron mt35 series octal flashes are under config option CONFIG_SPI_FLASH_MT35XU. Enable it in default defconfig for octal flashes to be detected. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dfaf73a72c7b408f1b8530f411c405d3dcf9f854.1669717110.git.michal.simek@amd.com
2022-12-05spi: cadence-qspi: Remove condition for calling enable linear modeAshok Reddy Soma
cadence_qspi_apb_enable_linear_mode() has a weak function defined, so no need to gaurd this under if (CONFIG_IS_ENABLED(ARCH_VERSAL)). In cadence_qspi_apb_write_execute(), enable linear mode is called twice by mistake, remove extra one. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20221129114134.18909-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05ARM: zynq: Add missing twd timer for mini configurationsMichal Simek
The commit b7e0750d8872 ("zynq: Convert arm twd timer to DM driver") switched timer to DM but missing to add nodes to all mini configurations. Based on it missing timer end up in non functional system where any delay doesn't work. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/2020fc7e3d4760e890265485b3c7e18eb1caf8be.1669724598.git.michal.simek@amd.com
2022-12-05arm64: zynqmp: Do not enable IPI by defaultMichal Simek
ZynqMP mini configurations are not using IPI driver and enabling this is adding additional ~1200 Bytes (depends on configuration). This ends up in situation that there is no enough space in OCM for relocation that's why disable this driver for all mini configurations. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/c71bab3927cb71ae517d9c21f59f3d5cf0caf712.1669734580.git.michal.simek@amd.com
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-11 12:17:55 +0000