summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-09-27compulab: Clean up some unused symbolsTom Rini
Since cm_t35 was removed, CONFIG_CM_T3X does not exist. This lets us simplify the code in board/compulab/common/eeprom.c a bit. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27Convert CONFIG_USB_XHCI_OMAP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_XHCI_OMAP Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27usb: phy: ti: Remove non-DM PHY codeTom Rini
At this point in time, all platforms that had previously used drivers/usb/phy/omap_usb_phy.c have been migrated to DM and related options. Remove this now unused code and some related unused defines. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27keystone2: Move CONFIG_AEMIF_CNTRL_BASE out of CONFIG namespaceTom Rini
This is only used in the aemif driver that is otherwise currently keystone2 centric. Moving forward, if this is applicable to some other platform then such base addresses should be able to be obtained via the device tree. Use KS2_AEMIF_CNTRL_BASE directly now rather than indirectly. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27doc: ti: am335x_evm: Minor general updatesTom Rini
- At this point there are a large number of Beaglebone boards, refer to them as a family rather than a growing list. - Reword customization as we're largely Kconfig-oriented now. - Remove the NOR section as the relevant defconfigs have long been removed and the general support was not updated. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27doc: ti: Convert am335x_evm README to rSTTom Rini
Convert the existing documentation to rST, keeping to just making formatting changes to start with. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27Merge tag 'dm-pull-next-27sep21' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm into next Various of-platdata improvements, including CONFIG_OF_REAL
2021-09-27Merge tag 'v2021.10-rc5' into nextTom Rini
Prepare v2021.10-rc5
2021-09-27Prepare v2021.10-rc5v2021.10-rc5Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- turris_omnia: fix leaked mtd device (Marek) - phy: marvell: cp110: Fix SATA invert polarity (Denis)
2021-09-27phy: marvell: cp110: Support SATA invert polarityDenis Odintsov
In commit b24bb99d cp110 configuration initially done in u-boot was removed and delegated to atf firmware as smc call. That commit didn't account for later introduced in d13b740c SATA invert polarity support. This patch adds support of passing SATA invert polarity flags to atf firmware during the smc call. Signed-off-by: Denis Odintsov <shiva@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-27arm: mvebu: turris_omnia: fix leaked mtd deviceMarek Behún
After getting MTD device via get_mtd_device_nm(), we need to put it with put_mtd_device(), otherwise we get Removing MTD device #0 (mx25l6405d) with use count 1 before booting kernel. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-26Merge tag 'efi-2021-10-rc5' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc5 Documentation: * add /config bindings to HTML documentation UEFI * Fix number_of_algorithms field in TCG EFI Protocol
2021-09-25fdt_support.h: Remove duplicated declarationsBin Meng
There are two duplicated declarations for ft_cpu_setup() and ft_pci_setup(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2021-09-25dm: pci: Fix handling of errors when scanning devicePali Rohár
Some PCIe controller's read_config() method support indicating error directly via return value, but some cannot distinguish all-ones (or all-zeros) read response from an error. The current code in pci_bind_bus_devices() interprets all-ones / all-zeros in PCI_VENDOR_ID register as "nothing connected", and continues the cycle, but an error returned via return value breaks the cycle. This is wrong for the PCIe controllers which return this error via return value. Handle all errors when reading PCI_VENDOR_ID the same way. This fixes enumeration of PCI devices for example when there is a PCI bridge connected behind another PCI bridge and not all ports are connected to a device, and the controller (for example Aardvark) translates the UR error (Unsupported Request) as -EOPNOTSUPP. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-25sandbox: correct cpu nodesHeinrich Schuchardt
The cpu nodes in arch/sandbox/dts/test.dts should conform to the devicetree specification: * property device_type must be set to "cpu" * the reg property must be provided * the cpu nodes must have an address Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-25dm: gpio: Add of-platdata supportSimon Glass
Add support for accessing GPIOs using of-plata. This uses the same mechanism as for clocks, but allows use of the xlate() method so that the driver can interpret the parameters. Update the condition for GPIO_HOG so that it is not built into SPL, since it needs SPL_OF_REAL which is not enabled in sandbox_spl. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25irq: Tidy up of-platdata irq supportSimon Glass
This function is available but not exported. More generally it does not really work as intended. Reimplement it and add a sandbox test too. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25dm: doc: Add a note about of-platdata header filesSimon Glass
This error can be confusing so mention it specifically in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25clk: Rename clk_get_by_driver_info()Simon Glass
This is actually a misnomer now, since the phandle info may contain a driver_info index or a udevice index. Rename it to use the word 'phandle', which seems more accurate. Add a comment while we are here. Also add a test for this function. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25dm: Add comments to dt-structs contentsSimon Glass
These structs do not have comments at present. Add them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25fdt: Update Makefile rules with the new OF_REAL KconfigSimon Glass
Simplify some of the Makefile rules using this Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: Try to avoid the preprocessor with OF_REALSimon Glass
Convert some of these occurences to C code, where it is easy to do. This should help encourage this approach to be used in new code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25mmc: nds32: ftsdc010: Convert to livetreeSimon Glass
Use the livetree API for this driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-09-25treewide: Use OF_REAL instead of !OF_PLATDATASimon Glass
Now that we have a 'positive' Kconfig option, use this instead of the negative one, which is harder to understand. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: Simply conditions with the new OF_REALSimon Glass
Use this new Kconfig to simplify the compilation conditions where appropriate. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25fdt: Create a new OF_REAL KconfigSimon Glass
The condition to indicate whether there is a runtime devicetree available is OF_CONTROL && !OF_PLATDATA. This is a bit unweidly and is repeated in a lot of places. Add a new OF_REAL Kconfig which provides this information directly. Note: This is similar in effect to LIBFDT. We might consider dropping LIBFDT and using this instead, but this is left for now as we also have OF_LIBFDT_OVERLAY which it would not make sense to change. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...Simon Glass
The current API is outdated as it requires a devicetree pointer. Move these functions to use the ofnode API and update this globally. Add some tests while we are here. Correct the call in exynos_dsim_config_parse_dt() which is obviously wrong. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25efi_loader: Fix spec ID event creationRuchika Gupta
TCG EFI Protocol Specification defines the number_of_algorithms field in spec ID event to be equal to the number of active algorithms supported by the TPM device. In current implementation, this field is populated with the count of all algorithms supported by the TPM which leads to incorrect spec ID event creation. Similarly, the algorithm array in spec ID event should be a variable length array with length being equal to the number_of_algorithms field. In current implementation this is defined as a fixed length array which has been fixed. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> CC: Masahisa Kojima <masahisa.kojima@linaro.org> CC: Ilias Apalodimas <ilias.apalodimas@linaro.org> CC: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-09-25doc: Add mention of the /config bindingSimon Glass
The devicetree binding files are in their own directory and use a simple text format. Add a link for the binding for the /config node, since it is otherwise hard to find. Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-09-24vexpress_ca9x4: Add missing SYS_LOAD_ADDRTom Rini
- Add missing CONFIG_SYS_LOAD_ADDR based on other platforms - Resync Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-24Merge branch '2021-09-24-assorted-updates' into nextTom Rini
- A few minor updates
2021-09-24drivers: tpm2: update reset gpio semanticsJorge Ramirez-Ortiz
Use the more generic reset-gpios property name. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-09-24Avoid polluting CONFIG_ namespace with board specific define.Kristian Amlie
Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-09-24tools: Handle PAGER containing argumentsPaul Barker
When printing full help output from a tool, we should be able to handle a PAGER variable which includes arguments, e.g. PAGER='less -F'. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2021-09-24tools: Refactor full help printingPaul Barker
Collect the code for printing the full help message of patman, buildman and binman into a single function in patman.tools. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2021-09-24ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU.Kristian Amlie
vexpress_ca9x4 is seemingly the only board except for qemu_arm which is able to run U-Boot correctly, using the `-M vexpress-a9` option to QEMU. Building for qemu_arm and running qemu-system-arm with the `-M virt` argument has a number of downsides, most importantly that it only supports virtio storage drivers. This significantly reduces its usefulness in testing memory card and Flash solutions, especially when the tested images are from a third party source. So therefore we reintroduce the vexpress_ca9x4 board in this commit, with the explicit goal of using it with QEMU. A number of differences to note from the original: * Since the board was apparently unmaintained, I have now set myself as the maintainer. * The board has been converted to use the driver model, which was the reason it was removed in the first place. * The vexpress_ca15_tc2 and vexpress_ca5x2 boards, which were removed in the same commit, are not necessary for the QEMU use case, and have been omitted. * An `mmc0` alias was introduced in the dts file. The mmc is not detected correctly without this, now that it's based on the device tree instead of the board's init function. * A couple of other nodes were removed because they were problematic when trying to run the UEFI bootmgr. Once again, the primary use case here is QEMU, and these nodes are not needed for that to work. * Unnecessary board init code has been removed, thanks to driver model and device tree. * `CONFIG_OF_EMBED` has been enabled. I know this goes against recommended practice, but there doesn't seem to be any other way to pass the dtb to U-Boot in the QEMU scenario. Using the -dtb argument does not work, I suppose because U-Boot doesn't use the same mechanics as the kernel when it's booting. * Load addresses have been changed to fit QEMU use case. People wanting to get a more detailed, yet somewhat isolated, diff between this and the original, can run this command: git diff c6c26a05b89f25a06e7562f8c2071b60fd0c9eac~1 -- \ $( git diff-tree --diff-filter=A -r --name-only HEAD~1 HEAD) (Make sure to either check out this commit first, or replace HEAD with the commit ID of this commit) Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2021-09-24arm: use CONFIG_SUPPORT_PASSING_ATAGSPatrick Delaunay
Simplify the bootm and the spl code by using the new config CONFIG_SUPPORT_PASSING_ATAGS. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-09-24Merge branch '2021-09-24-assorted-minor-updates'Tom Rini
- Assorted bugfixes, MAINTAINER updates and dead code removal
2021-09-24arm: orion5x: edminiv2: change maintainerSimon Guinot
Since Albert Aribaud is not maintaining anymore the LaCie Ethernet Disk mini V2 board, then I am taking over. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-24mtd: remove SPEAr flash driver st_smiPatrick Delaunay
Remove the driver st_smic.c used in SPEAr products and the associated config CONFIG_ST_SMI; this driver is no more used in U-Boot after the commit 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support"). Fixes: 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-09-24Taking over responsibility for GE boards from SebastianMartyn Welch
I am taking over responsibility for the GE board from Sebastian Reichel. Updating the MAINTAINERS files to reflect this. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-09-24MAINTAINERS: remove SPEAR entryPatrick Delaunay
As the lastest spear directories are removed, delete the associated entry in the MAINTAINERS file: - arch/arm/cpu/arm926ejs/spear/ - arch/arm/include/asm/arch-spear/ Fixes: 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-09-24fs: avoid superfluous messagesHeinrich Schuchardt
Output like the following is quite irritating: => bootefi hello Scanning disk mmc2.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** Scanning disk mmc1.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** Scanning disk mmc0.blk... No valid Btrfs found Bad magic number for SquashFS image. ** Unrecognized filesystem type ** Albeit a whole disk may be formatted with a filesystem in most cases a partition table is used and the whole disk (partition number 0) doesn't contain a filesytem. Some partitions may only contain a blob. Not seeing a filesytem on the whole disk or on any partition is only worth a debug message. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-09-24scripts/mailmapper: enable running with Python 3Heinrich Schuchardt
Our mailmapper script required Python 2 which is no longer maintained. A main difference when converting to Python 3 is that byte strings are not character strings. So add conversion and skip over conversion errors. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-09-24test/py: tpm2: Skip tpm pytest based on env variableT Karthik Reddy
Tpm test cases relies on tpm device setup. Provide an environment variable "env__tpm_device_test_skip = True" to skip the test case if tpm device is not present. Only needed will have to add variable to the py-test framework. Test runs successfully even this variable is absent. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-09-24Merge branch '2021-09-24-arm64-optimized-str-funcs' into nextTom Rini
- Bring in, but disable by default, asm optimized string functions for arm64.
2021-09-24arm64: Kconfig: Enable usage of optimized memset/memcpy/memmoveStefan Roese
This patch enables the use of the optimized memset(), memmove() & memcpy() versions recently added on ARM64. Please note that these optimized functions are now only enabled for recent GCC versions (>= 9.4), as earlier GCC versions throw these errors: aarch64-linux-ar: warning: arch/arm/lib/memset-arm64.o: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0000000 ... Signed-off-by: Stefan Roese <sr@denx.de> [trini: Make this default to off as it causes problems on some platforms still] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-24arm64: memset-arm64: Use simple memset when cache is disabledStefan Roese
The optimized memset uses the dc opcode, which causes problems when the cache is disabled. This patch adds a check if the cache is disabled and uses a very simple memset implementation in this case. Otherwise the optimized version is used. Signed-off-by: Stefan Roese <sr@denx.de>
2021-09-24arm64: arch/arm/lib: Add optimized memset/memcpy/memmove functionsStefan Roese
Ported from https://github.com/ARM-software/optimized-routines These files are included from this repository, including the latest git commit ID: string/aarch64/memcpy.S: afd6244a1f8d string/aarch64/memset.S: e823e3abf5f8 string/asmdefs.h: e823e3abf5f8 Note that memmove is also handled by the memcpy function. Please note that when adding these optimized functions as default memset memcpy functions in U-Boot, U-Boot fails to boot on the LX2160ARDB. After the initial ATF output, no U-Boot output is shown on the serial console. Some exception is triggered here in the very early boot process as some of the assembler opcodes need the caches to be enabled. Because of this, a follow-up patch will add a check to use a simple non-optimized memset for the "cache disabled" case. Note: I also integrated and tested with the Linux versions of these optimized functions. They are similar to the ones now integrated but these ARM versions are still a small bit faster. Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-02 20:30:02 +0000