summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-24rockchip: ringneck_px30: Use common bss and stack addressesQuentin Schulz
U-Boot proper pre-reloc is currently running out of memory and it is thus impossible to boot into U-Boot CLI. Fix this by migrating to the common bss and stack addresses for PX30, which drastically increases the size of the pre-reloc allocation pool (8 times bigger now). The memory layout in SPL and U-Boot proper now match the other SoCs' using ROCKCHIP_COMMON_STACK_ADDR. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
2024-05-24rockchip: Use common bss and stack addresses on PX30Quentin Schulz
See commit 008ba0d56d00 ("rockchip: Add common default bss and stack addresses") for memory layout. This migrates PX30 to use the new layout, except for TPL. Indeed, PX30 is extremely limited in SRAM, so we need to be extra careful about what goes into the TPL and how much we can allocate there, so let's keep the current value for TPL_SYS_MALLOC_F_LEN (already present in the PX30-specific Kconfig, from an earlier commit). This will allow us to use the same memory layout on one more Rockchip SoC, which is always a nice thing. Additionally, this will make it easier to fix U-Boot proper pre-reloc running out of memory on PX30 in a subsequent commit. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
2024-05-24rockchip: px30: default TPL_SYS_MALLOC_F_LEN to 0x600 on PX30 Kconfig levelQuentin Schulz
This is the kind of setting that typically doesn't need to be changed between boards based on the same SoC, so let's make it the default in PX30 Kconfig so we don't have to care about it in the defconfig if we don't want to. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
2024-05-24clk: rockchip: rk3588: Set SPLL frequency during SPL stageHeiko Stuebner
All parts expect the SPLL to run at 702MHz. In U-Boot it's the SPLL_HZ declaring this rate and in the kernel it's a fixed clock definition. While everything is expecting 702MHz, the SPLL is not running that frequency when coming from the bootrom though, instead it's running at 351MHz and the vendor-u-boot just sets it to the expected frequency. The SPLL itself is located inside the secure-BUSCRU and in theory accessible as an SCMI clock, though this requires an unknown amount of cooperation from trusted-firmware to set at a later stage, though during the SPL stage we can still access the relevant CRU directly. The SPLL is for example necessary for the DSI controllers to produce output. As the SPLL is "just" another rk3588 pll, just set the desired rate directly during the SPL stage. Tested on rk3588-rock5b and rk3588-tiger by reading back the PLL rate and also observing working DSI output with this change. Fixes: 6737771600d4 ("rockchip: rk3588: Add support for sdmmc clocks in SPL") Suggested-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-05-24rockchip: rv1126: Migrate to OF_UPSTREAMAnand Moon
Migrate RV1126 boards that exists in Linux v6.8 to use OF_UPSTREAM. Following targets is migrated to use OF_UPSTREAM: - rv1126-edgeble-neu2 : Board is an industrial form factor IO board. - sonoff-ihost-rv1126 : Gateway device designed to provide a Smart Home Hub. Cc: Tim Lunn <tim@feathertop.org> Cc: Jagan Teki <jagan@edgeble.ai> Reviewed-By: Tim Lunn <tim@feathertop.org> Tested-By: Tim Lunn <tim@feathertop.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Anand Moon <anand@edgeble.ai> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
2024-05-24rockchip: rv1108: Remove unneeded local rv1108-cru.hFabio Estevam
After the conversion of RV1108 to OF_UPSTREAM, include/dt-bindings/clock/rv1108-cru.h is no longer needed because there is dts/upstream/include/dt-bindings/clock/rv1108-cru.h from upstream Linux. Remove the unneeded rv1108-cru.h file. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-05-20Prepare v2024.07-rc3v2024.07-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-17Init virtio before loading ENV from EXT4 or FATFiona Klute
Specifying a file in an EXT4 or FAT partition on a virtio device as environment location failed because virtio hadn't been initialized by the time the environment was loaded. This patch mirrors commit 54ee5ae84191 ("Add SCSI scan for ENV in EXT4 or FAT") in issue and fix, just for a different kind of block device. The additional include in include/virtio.h is needed so all functions called there are defined, the alternative would have been to include dm/device.h separately in the env/ sources. Checkpatch suggests using "if (IS_ENABLED(CONFIG...))" instead of "#if defined(CONFIG_...)", I'm sticking to the style of the existing code here. Signed-off-by: Fiona Klute <fiona.klute@gmx.de> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Bin Meng <bmeng.cn@gmail.com> CC: Rogier Stam <rogier@unrailed.org>
2024-05-16Merge tag 'u-boot-dfu-20240516' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dfu u-boot-dfu-20240516 - Fix cdns3 low power hang via fast access bit - Multiple dwc3 gadget fixes, mainly for USB support on TI AM6232 - Consistent USB_GADGET_MANUFACTURER for PHYTEC boards - MAINTAINERS file update for u-boot-dfu
2024-05-16MAINTAINERS: add USB gadget regex to u-boot-dfu treeMattijs Korpershoek
We try to split work with Marek on USB as following: - Mattijs handles USB gadget - Marek handles the rest of USB Add additional gadget patterns to the maintainers file so that I get cc'ed more often on USB gadget patches. Acked-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20240516-gadget-maintainer-v2-2-23cc916df434@baylibre.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-16MAINTAINERS: add tree link for fastbootMattijs Korpershoek
Fastboot patches go through the u-boot-dfu tree. Add a link in the maintainers file for it. Link: https://lore.kernel.org/r/20240516-gadget-maintainer-v2-1-23cc916df434@baylibre.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-16usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End TransferThinh Nguyen
Upstream Linux commit 3aa07f72894d. If there's a disconnection while operating in eSS, there may be a delay in VBUS drop response from the connector. In that case, the internal link state may drop to operate in usb2 speed while the controller thinks the VBUS is still high. The driver must make sure to disable GUSB2PHYCFG.SUSPHY when sending endpoint command while in usb2 speed. The End Transfer command may be called, and only that command needs to go through at this point. Let's keep it simple and unconditionally disable GUSB2PHYCFG.SUSPHY whenever we issue the command. This scenario is not seen in real hardware. In a rare case, our prototype type-c controller/interface may have a slow response triggerring this issue. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/5651117207803c26e2f22ddf4e5ce9e865dcf7c7.1668045468.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240412202611.3565052-7-alexander.sverdlin@siemens.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-16usb: dwc3: gadget: properly check ep cmdFelipe Balbi
Upstream Linux commit 5999914f227b. The cmd argument we pass to dwc3_send_gadget_ep_cmd() could contain extra arguments embedded. When checking for StartTransfer command, we need to make sure to match only lower 4 bits which contain the actual command and ignore the rest. Reported-by: Janusz Dziedzic <januszx.dziedzic@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [A. Sverdlin: cherry-picked only DWC3_DEPCMD_CMD() define] Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240412202611.3565052-6-alexander.sverdlin@siemens.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-16usb: dwc3: gadget: Check ENBLSLPM before sending ep commandThinh Nguyen
Upstream Linux commit 87dd96111b0b. When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an endpoint command. Current implementation only save and restore GUSB2PHYCFG.SUSPHY configuration. We must save and clear both GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY settings. Restore them after the command is completed. DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2 Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240412202611.3565052-5-alexander.sverdlin@siemens.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-16usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEEDFelipe Balbi
Upstream Linux commit ab2a92e7a608. As a micro-power optimization, let's only resume the USB2 PHY if we're working on <=HIGHSPEED. If we're gonna work on SUPERSPEED or SUPERSPEED+, there's no point in resuming the USB2 PHY. Fixes: 2b0f11df84bb ("usb: dwc3: gadget: clear SUSPHY bit before ep cmds") Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240412202611.3565052-4-alexander.sverdlin@siemens.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-16usb: dwc3: gadget: clear SUSPHY bit before ep cmdsFelipe Balbi
Upstream Linux commit 2b0f11df84bb. Synopsys Databook 2.60a has a note that if we're sending an endpoint command we _must_ make sure that DWC3_GUSB2PHY(n).SUSPHY bit is cleared. This patch implements that particular detail. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240412202611.3565052-3-alexander.sverdlin@siemens.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-16usb: dwc3: gadget: combine return points into a single oneFelipe Balbi
Upstream Linux commit c0ca324d09a0. dwc3_send_gadget_ep_cmd() had three return points. That becomes a pain to track when we need to debug something or if we need to add more code before returning. Let's combine all three return points into a single one just by introducing a local 'ret' variable. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240412202611.3565052-2-alexander.sverdlin@siemens.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-14Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/20690 - RISC-V: Add NULL check after parsing compatible string - Board: Add Milk-V Mars CM board - Andes: Unify naming policy
2024-05-14Merge branch 'qcom-main' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-snapdragon This [pull request] for master fixes framebuffer video on almost all Qualcomm platforms where the framebuffer is initialised by the first stage bootloader.
2024-05-14andes: Unify naming policy for Andes related sourceLeo Yu-Chi Liang
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-05-14riscv: simplify backtrace reportHeinrich Schuchardt
* We already have a header 'backtrace', there is no need to repeat the word backtrace on every line. * Add a blank line before the backtrace section of the crash report for improved readability. * If U-Boot is compiled without backtrace, there is no need to write a message at all. * Avoid #ifdef. We prefer functions to always be compiled and let the linker remove them if not needed. * Foresee 3 digits for the backtrace index. For testing the 'exception' command can be used. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-05-14starfive: add mac vendor sub-commandHeinrich Schuchardt
As boards from multiple vendors (Milk-V, StarFive, Pine64) use the mac command provide a sub-command to set the vendor string. Reported-by: E. Shattow <lucent@gmail.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-05-14configs: visionfive2: enable SPL_YMODEM_SUPPORTHeinrich Schuchardt
We can use U-Boot for recovering JH7110 based boards via UART if CONFIG_SPL_YMODEM_SUPPORT=y. * Send u-boot-spl.normal.out via XMODEM. * Send u-boot.itb via YMODEM. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: E. Shattow <lucent@gmail.com>
2024-05-14doc: Milk-V Mars CM and Milk-V Mars CM LiteHeinrich Schuchardt
Provide a man-page describing the usage of U-Boot on the Milk-V Mars CM and Milk-V Mars CM Lite boards. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: E Shattow <lucent@gmail.com>
2024-05-14board: add support for Milk-V Mars CMHeinrich Schuchardt
We already support the VisionFive 2 and the Milk-V Mars board by patching the VisionFive 2 device tree. With this patch the same is done for the Milk-V Mars CM. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Tested-by: E. Shattow <lucent@gmail.com> Reviewed-by: E. Shattow <lucent@gmail.com>
2024-05-14board: starfive: function to read eMMC sizeHeinrich Schuchardt
The EEPROM provides information about the size of the eMMC. Provide a new function get_mmc_size_from_eeprom() to read it. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: E. Shattow <lucent@gmail.com>
2024-05-14riscv: add NULL check before calling strlen in the riscv cpu's get_desc()Hanyuan Zhao
Without the NULL check, if the devicetree that u-boot loads does not have a compatible property then a store access fault will be raised and force the machine to reset, due to the NULL pointer we passed to strlen. This commit adds this check and will return -ENOSPC to indicate the get_desc failed. Signed-off-by: Hanyuan Zhao <zhaohy22@mails.tsinghua.edu.cn> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-05-14configs: Make USB_GADGET_MANUFACTURER consistent over all PHYTEC boardsBenjamin Hahn
Set CONFIG_USB_GADGET_MANUFACTURER to PHYTEC for all PHYTEC boards. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de> Acked-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240503-wip-bhahn-bspimx8m-3196-v1-1-855c7242151f@phytec.de Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-14usb: cdns3: gadget.c: Set fast access bitAswath Govindraju
When the device port is in a low power state [U3/L2/Not Connected], accesses to usb device registers may take a long time. This could lead to potential core hang when the controller registers are accessed after the port is disabled by setting DEVDS field. Setting the fast register access bit ensures that the PHY clock is keeping up in active state. Therefore, set fast access bit to ensure the accesses to device registers are quick even in low power states. commit b5148d946f45 ("usb: cdns3: gadget: set fast access bit") in the upstream kernel is taken as reference. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240424073911.1943-1-r-gunasekaran@ti.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2024-05-14mach-snapdragon: do carveouts for qcs404 onlySam Day
The newly introduced carve_out_reserved_memory causes issues when U-Boot is chained from the lk2nd bootloader. lk2nd provides a simple-framebuffer device and marks the framebuffer region as no-map in the supplied /reserved-memory. Consequently, the simple_video driver triggers a page fault when it tries to write to this region. As per Caleb's advice, this simple patch only does the carveouts for the qcs404 SoC for which it was originally designed. The intent is to do the carveouts for more Qualcomm SoCs in future. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
2024-05-13Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"Tom Rini
Roger Quadros <rogerq@kernel.org> says: Sync AM62 device tree files with Linux v6.9 and add in the missing bits in -u-boot.dtsi to get CPSW Ethernet working. CI testing: https://github.com/u-boot/u-boot/pull/534
2024-05-13arm: dts: k3-am625-beagleplay: Fix Ethernet PHY reset GPIORoger Quadros
Move GPIO pinmux to MDIO node. Add GB Ethernet reset GPIO. Add PIN_INPUT to Fix SPE ethernet reset gpio so that reading the GPIO can give correct status. Signed-off-by: Roger Quadros <rogerq@kernel.org>
2024-05-13arm: dts: k3-am625-beagleplay: get CPSW Ethernet to workRoger Quadros
Add missing bits in -u-boot.dtsi to get CPSW Ethernet working. Signed-off-by: Roger Quadros <rogerq@kernel.org>
2024-05-13arm: dts: k3-am62*: sync with Linux v6.9Roger Quadros
Update k3-am62 DT files from Linux v6.9 Signed-off-by: Roger Quadros <rogerq@kernel.org>
2024-05-13doc/sphinx: Bump Jinja2 to 3.1.4Tom Rini
While we unlikely to have an issue with CVE-2024-22195, it is simple enough to bump our version of Jinja2 to receive the fix, do so. Reported-by: GitHub dependabot Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-13Merge tag 'rpi-2024.07-rc3' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi Updates for RPi for 2024.07: - Switch to OF_HAS_PRIOR_STAGE by default
2024-05-13rpi: Switch to OF_HAS_PRIOR_STAGE by defaultTom Rini
On all Raspberry Pi platforms, we're loaded by a prior stage firmware that has assembled and passed on a device tree binary for us to use. Switch to using this tree by default. Cc: Matthias Brugger <mbrugger@suse.com> Cc: Simon Glass <sjg@chromium.org> Cc: François Ozog <francois.ozog@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Simon Glass <sjg@chromium.org>
2024-05-12Merge branch 'master-cleanup' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-sh
2024-05-12ARM: dts: renesas: Drop DTs with OF_UPSTREAM counterpartsMarek Vasut
Remove DTs which are now replaced by OF_UPSTREAM counterparts. No functional change expected. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Adam Ford <aford173@gmail.com> #beacon boards
2024-05-10Merge patch series "Add AM64x Support to PRUSS and PRU_RPROC driver"Tom Rini
MD Danish Anwar <danishanwar@ti.com> says: This series adds AM64x related compatibles to PRUSS and PRU_RPROC drivers. This series is a prerequisite for ICSSG Ethernet driver. Once Support for AM64x is added to PRUSS and PRU_RPROC driver, I'll send another series to enable ICSSG Ethernet driver for AM64x as well.
2024-05-10Merge patch series "Generate all SR boot binaries"Tom Rini
Neha Malcom Francis <n-francis@ti.com> says: Add support for missing HS SRs in the build for J721E and J7200. Boot logs (updated for v2): https://gist.github.com/nehamalcom/e652752623537aced8cf31308015d7c9
2024-05-10Merge patch series "*** Commonize board code for K3 based SoMs ***"Tom Rini
Wadim Egorov <w.egorov@phytec.de> says: Factor out code that we can reuse across all our K3 based SoMs. 2nd patch of this series require patch [1] to be applied first. [1] https://lists.denx.de/pipermail/u-boot/2024-April/552021.html
2024-05-10arm: mach-k3: am642: Provide a way to obtain boot device for non SPLsWadim Egorov
Let's provide get_boot_device() for AM64, similar to what we did in commit 2f9095e2bf59 ("arm: mach-k3: am625: Provide a way to obtain boot device for non SPLs") for AM62. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-05-10soc: ti: pruss: Add support for AM64xMD Danish Anwar
Add support for AM64x by adding it's compatible in pruss driver. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org>
2024-05-10remoteproc: pru: Add support for AM64x PRU / RTU coresMD Danish Anwar
Add support for AM64x PRU cores by adding compatibles for AM64x. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org>
2024-05-10arm: dts: k3-j7200-binman: Add support for HSSE1.0 and HSFS1.0Neha Malcom Francis
J7200 has SR1.0 and SR2.0 having three variants of each GP, HS-FS and HS-SE. Current build does not generate HS-SE SR1.0 and HS-FS SR1.0 so add support for them. Reported-by: Suman Anna <s-anna@ti.com> Reported-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Andrew Davis <afd@ti.com>
2024-05-10arm: dts: k3-j721e-binman: Add support for HSFS1.1Neha Malcom Francis
J721E has SR1.1 and SR2.0 having three variants of each GP, HS-FS and HS-SE. Current build does not generate HS-FS SR1.1 so add support for them. Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Andrew Davis <afd@ti.com>
2024-05-10phycore_am64x_a53_defconfig: Enable CONFIG_BOARD_LATE_INITWadim Egorov
Enable CONFIG_BOARD_LATE_INIT to use PHYTECs common board_late_init() to set handy environment variables for u-boot. Also, resync after savedefconfig. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-05-10board: phytec: Commonize board code for K3 based SoMsWadim Egorov
Environment handling code can be reused across all our K3 based SoMs. Instead of adding the same code for every new SoM, move it to a common board.c file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-05 18:38:17 +0000