summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-05ppc: qemu: Enable OF_CONTROLBin Meng
The QEMU ppce500 machine generates a device tree blob and passes it to U-Boot during boot. Let's enable OF_CONTROL with OF_BOARD and provide board_fdt_blob_setup() in the board codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Drop board_early_init_f()Bin Meng
This function does nothing. Drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Drop init_laws() and print_laws()Bin Meng
These are no longer needed. Drop them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAWBin Meng
LAW related codes should be wrapped with CONFIG_FSL_LAW. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Fix CONFIG_SYS_PCI_MAP_ENDBin Meng
CONFIG_SYS_PCI_MAP_END currently points to 0xe8000000, which means the upper end of the virtual address mapped to PCI bus address ends at 0xe8000000. But this is wrong as the CCSBAR was already mapped at 0xe0000000 with a 1 MiB size. Fixes: fa08d3951777 ("PPC 85xx: Add qemu-ppce500 machine") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Support non-identity PCI bus addressBin Meng
When QEMU originally supported the ppce500 machine back in Jan 2014, it was created with a 1:1 mapping of PCI bus address. Things seemed to change rapidly that in Nov 2014 with the following QEMU commits: commit e6b4e5f4795b ("PPC: e500: Move CCSR and MMIO space to upper end of address space") and commit cb3778a0455a ("PPC: e500 pci host: Add support for ATMUs") the PCI memory and IO physical address were moved to beyond 4 GiB, but PCI bus address remained below 4 GiB, hence a non-identity mapping was created. Unfortunately corresponding U-Boot updates were missed along with the QEMU changes and the U-Boot QEMU ppce500 PCI support has been broken since then. This commit makes the PCI (non-DM version) work again. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05common: fdt_support: Support special case of PCI address in fdt_read_prop()Bin Meng
At present fdt_read_prop() can only handle 1 or 2 cells. It is called by fdt_read_range() which may be used to read PCI address from <ranges> for a PCI bus node where the number of PCI address cell is 3. The <ranges> property is an array of: { <child address> <parent address> <size in child address space> } When trying to read <child address> from a PCI bus node using fdt_read_prop(), as the codes below: /* Read <child address> */ if (child_addr) { r = fdt_read_prop(ranges, ranges_len, cell, child_addr, acells); if (r) return r; } it will fail, because the PCI child address is made up of 3 cells but fdt_read_prop() cannot handle it. We advance the cell offset by 1 so that the <child address> can be correctly read. This adds the special handling of such case. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05ppc: qemu: Update MAINTAINERS for correct email addressBin Meng
Alex's previous email address is no longer reachable. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05pci: fsl_pci_init: Dynamically allocate the PCI regionsBin Meng
Commit e002474158d1 ("pci: pci-uclass: Dynamically allocate the PCI regions") changes 'struct pci_controller'.regions from pre-allocated array of regions to dynamically allocated, which unfortunately broken lots of boards that still use the non-DM PCI driver. This patch changes the non-DM fsl_pci_init driver to dynamically allocate the regions, just like what's done in the pci uclass driver. Fixes: e002474158d1 ("pci: pci-uclass: Dynamically allocate the PCI regions") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05net: dsa: remove master santiy checkMichael Walle
Because we probe the master ourselves (and fail if there is no master), it is not possible that we don't have a master device. There is one catch though: device removal. We don't support that. It wasn't supported neither before this patch. Because the master device was only set in .pre_probe(), if a device was removed master_dev was a dangling pointer and transmitting a frame cause a panic. I don't see a good solution without having some sort of notify machanism when a udevice is removed. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> [DSA unit tests] Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05net: dsa: remove NULL check for priv and platform dataMichael Walle
Because the uclass has the "*_auto" properties set, the driver model will take care of allocating the private structures for us and they can't be NULL. Drop the checks. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05net: dsa: probe master deviceMichael Walle
DSA needs to have the master device probed first for MAC inheritance. Until now, it only works by chance because the only user (LS1028A SoC) will probe the master device first. The probe order is given by the PCI device ordering, thus it works because the master device has a "smaller" BDF then the switch device. Explicitly probe the master device in dsa_port_probe(). Fixes: fc054d563bfb ("net: Introduce DSA class for Ethernet switches") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05net: dsa: return early if there is no masterMichael Walle
It doesn't make sense to have DSA without a master port. Error out early if there is no master port. Fixes: fc054d563bfb ("net: Introduce DSA class for Ethernet switches") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1012aqds: Update MAINTAINERSPriyanka Jain
Update LS1012AQDS Board MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: lx2160a: Update MAINTAINERSPriyanka Jain
Update LX2160AQDS BOARD MAINTAINER entry to current MAINTAINER. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1046ardb: Update MAINTAINERSPriyanka Jain
Update LS1046ARDB BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1046aqds: Update MAINTAINERSPriyanka Jain
Update LS1046AQDS BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls2080ardb: Update MAINTAINERSPriyanka Jain
Update LS2080ARDB BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls2080aqds: Update MAINTAINERSPriyanka Jain
Update LS2080AQDS BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1088a: Update MAINTAINERSPriyanka Jain
Update LS1088ARDB, LS1088AQDS BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1043ardb: Update MAINTAINERSPriyanka Jain
Update LS1043ARDB BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1028a: Update MAINTAINERSPriyanka Jain
Update LS1028AQDS, LS10128ARDB board MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1021atwr: Update MAINTAINERSPriyanka Jain
Update LS1021ATWR BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1021aiot: Update MAINTAINERSPriyanka Jain
Update LS1021AIOT BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1012ardb: Update MAINTAINERSPriyanka Jain
Update LS1012ARDB BOARD MAINTAINERS entries to current MAINTAINERS. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: ls1012afrdm: Update MAINTAINERSPriyanka Jain
Update LS1012AFRWY BOARD MAINTAINER entry to current MAINTAINER. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05board: corenet_ds: MAINTAINERS: Remove redundant entriesPriyanka Jain
Remove MAINTAINERS entries for P3041DS_NAND_SECURE_BOOT_defconfig and P5040DS_NAND_SECURE_BOOT_defconfig as these configs support have been removed. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05configs: fsl: move via specific defines to KconfigRajesh Bhagat
Moves below via specific defines to Kconfig: CONFIG_FSL_VIA Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05configs: fsl: move bootrom specific defines to KconfigRajesh Bhagat
Moves below bootrom specific defines to Kconfig: CONFIG_SYS_FSL_BOOTROM_BASE CONFIG_SYS_FSL_BOOTROM_SIZE Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05arm: fsl: common: Improve NXP VID driver PMBus supportStephen Carlson
This patch adds support for more PMBus compatible devices to the NXP drivers for its QorIQ family devices. At runtime, the voltage regulator is queried over I2C, and the required voltage multiplier determined. This change supports the DIRECT and LINEAR PMBus voltage reporting modes. Previously, the driver only supported a few specific devices such as the IR36021 and LTC3882, so this change allows the QorIQ series to be used with a much larger variety of core voltage regulator devices. checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain consistency with the existing code. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Tested-by: Wasim Khan <wasim.khan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-04Azure/GitLab: Use buildman -T0 for binman, etc, testTom Rini
There are times where buildman seems to get stuck in this job when in CI. Forcing single-threaded here allows us to complete and move on. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-04buildman: Support single-threaded operationSimon Glass
At present even if only a single thread is in use, buildman still uses threading. For some debugging it is helpful to do everything in the main process. Allow -T0 to support this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-04Nokia RX-51: Enable CONFIG_CMD_BOOTDPali Rohár
CONFIG_CMD_BOOTD provides 'boot' command which is required in more scripts. Signed-off-by: Pali Rohár <pali@kernel.org>
2021-03-04fs/squashfs: Fix compilation errorPali Rohár
Commit 401d1c4f5d2d29c4bc4beaec95402ca23eb63295 ("common: Drop asm/global_data.h from common header") broke compilation of squashfs filesystem when CONFIG_CMD_SQUASHFS=y is enabled. Compilation is failing on error: aarch64-linux-gnu-ld.bfd: u-boot/fs/squashfs/sqfs_inode.c:121: undefined reference to `le32_to_cpu' Fixes: 401d1c4f5d2d29c4bc4beaec95402ca23eb63295 ("common: Drop asm/global_data.h from common header") Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-03-03Merge tag 'dm-pull-3mar21' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
dm: Fix an obscure bug with empty of-platdata Fixes for ns16550 base address and frequency-reading Other minor fixes
2021-03-03serial: ns16550: Handle zero <clock-frequency> valueBin Meng
A working device tree node of ns16550 should never be populated with value zero for the <clock-frequency> property. Unfortunately this is the case for the QEMU ppce500 target. Let's try to assign plat->clock to CONFIG_SYS_NS16550_CLK as the last resort to handle such case. This commit should be reverted when: - The following QEMU patch [1] is merged, and - U-Boot CI has upgraded its QEMU version that contains the fix [1] http://patchwork.ozlabs.org/project/qemu-devel/patch/1612362288-22216-2-git-send-email-bmeng.cn@gmail.com/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03serial: ns16550: Correct the base address typeBin Meng
Currently ns16550_serial_assign_base() treats the argument 'base' with type `ulong`. This is incorrect because the base address was obtained from device tree with type `fdt_addr_t` that can represent a physical address larger than 32-bit in a 32-bit system. Fixes: 9e6ce62190b7 ("serial: ns16550: Fix ordering of getting base address") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03dts: Fix OF_LIVE dependencyBin Meng
lib/of_live.c references the following 2 ofnode APIs: of_alias_scan() and of_get_property(). These APIs get built only when DM is on. Fix the dependency then. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03lib: Fix BINMAN_FDT dependencyBin Meng
lib/binman.c references the following 3 ofnode APIs: ofnode_first_subnode(), ofnode_path() and ofnode_read_bool(). These APIs get built only when DM is on. Fix the dependency then. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03sandbox: host bind must close file descriptorHeinrich Schuchardt
Each invocation of the 'host bind' command with a file name argument opens a file descriptor. The next invocation of the 'host bind' command destroys the block device but the file descriptor remains open. The same holds true for the 'unbind blk' command. Close the file descriptor when unbinding the host block device. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03fix patman --limit-cc optionBernhard Kirchen
patman's --limit-cc option parses its argument to an integer and uses that to trim the list of CC recipients to a particular maximum. but that only works if the cc variable is a list, which it is not. Signed-off-by: Bernhard Kirchen <bernhard.kirchen@mbconnectline.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03bootstage: Fix dependency for BOOTSTAGE_RECORD_COUNTSimon Glass
At present these three Kconfigs exist even when bootstage is not enabled. This is not necessary since bootstage.c is only built if BOOTSTAGE is enabled. Make them conditional. Also fix up the overflow message to mention TPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-03dm: core: Add DM_DEVICE_REMOVE condition to all exit pathsSimon Glass
At present device_bind() does some unnecessary work if a device fails to bind in SPL. Add the missing conditions. Also fix a style nit in the same function while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-03dm: core: Fix allocation of empty of-platdataSimon Glass
With of-platdata we always have a dtv struct that holds the platform data provided by the driver_info record. However, this struct can be empty if there are no actual devicetree properties provided. The upshot of empty platform data is that it will end up as a zero-size member in the BSS section, which is fine. But if the driver specifies plat_auto then it expects the correct amount of space to be allocated. At present this does not happen, since device_bind() assumes that the platform-data size will always be >0. As a result we end up not allocating the space and just use the BSS region, overwriting whatever other contents are present. Fix this by removing the condition that platform data be non-empty, always allocating space if requested. This fixes a strange bug that has been lurking since of-platdata was implemented. It has likely never been noticed since devices normally have at least some devicetree properties, BSS is seldom used on SPL, the dtv structs are normally at the end of bss and the overwriting only happens if a driver changes its platform data. It was discovered using sandbox_spl, which exercises more features than a normal board might, and the critical global_data variable 'gd' happened to be at the end of BSS. Fixes: 9fa28190091 ("dm: core: Expand platdata for of-platdata devices") Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-03Merge tag 'u-boot-imx-20210303' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2021.04 ---------------- - new boards: - i.MX8MN Beacon EmbeddedWorks (2GB) - Gateworks Venice imx8mm - convert to DM: - imx53-qsb, mx53loco, mx51evk, mx23-evk - Fixes : - Network : FEC ethernet quirks - DH dh-imx6 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6597
2021-03-03board: gateworks: imx8mm: Add Gateworks Venice board supportTim Harvey
Add initial support for Gateworks Venice product family based on the i.MX 8M Mini SoC Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-03arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kitsTim Harvey
Add Gateworks i.MX 8M Mini Development kits from Linux-5.12-rc1 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-03-03Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
- Kconfig dependency fix for USB_KEYBOARD - musb gadget fixes / enhancements
2021-03-03usb: USB keyboard requires DM_KEYBOARDHeinrich Schuchardt
If CONFIG_DM_USB=y, the USB keyboard only works if CONFIG_DM_KEYBOARD=y. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-03Nokia RX-51: Enable usbtty serial console by defaultPali Rohár
Now when usbtty serial console is fixed in U-Boot enable CONFIG_USB_TTY for Nokia RX-51 board by default. Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro and include U-Boot string into USB product name to indicate usage of U-Boot. CONFIG_CONSOLE_MUX is already used and U-Boot console is available for all in/out devices. Therefore there is no need to have separate commands 'run sercon', 'run usbcon' and 'run vgacon', so remove them. As space for U-Boot is limited to 256kB, enable CONFIG_OPTIMIZE_INLINING and disable some other unused options so CONFIG_USB_TTY can be enabled. Nokia RX-51 does not have easily accessible UART serial console so the only option for easy debugging is to use device's keyboard+screen or this usbtty serial console over USB. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Acked-by: Pavel Machek <pavel@ucw.cz>
generated by cgit v1.2.3 (git 2.0.4) at 2025-10-13 00:40:18 +0000