| Age | Commit message (Collapse) | Author |
|---|
|
Add dram support for the MT53E1G32D2FW-046 RevC part which is a single die
32Gbit density part vs RevA/B which were dual-die parts:
- use a previously unused EEPROM byte to denote a variant of the
base config to be patched
- add a dram description string
- return the board struct from eeprom_init and pass it to the
spl_dram_init function so that it has access to the EEPROM
- move ddr_init into the spl_dram_init so that it can be patched
in the per-soc init function
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
Add the configuration register for DDRC_ADDRMAP7 which was added in the
RAP spreadsheet v19. This has no functional change but allows DRAM
configuration to be patched in a later commit.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
These erratas are only useful if USB is enabled. If it is disabled
these erratas might cause issues.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
|
|
Make temperature unit (celsius) more clear to reduce confusion.
Signed-off-by: David Zang <davidzangcs@gmail.com>
|
|
The options related to FSL_SEC_MON are part of the chain of trust
related options and should be under that menu, so move it there.
Furthermore we don't need to prompt for the driver itself but do need to
allow for configuration of the monitor endianess.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
As no platforms use this driver anymore, remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
As part of splitting the i.MX parts of FSL_ESDHC out from the more
legacy parts, the FSL_ESDHC_IMX symbol was added. This platform is the
only one which was not converted correctly.
Fixes: e37ac717d796 ("Convert to use fsl_esdhc_imx for i.MX platforms")
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Enable standard boot for the phycore-imx8mp and use it as default. Add
all variables required for standard boot to the environment.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Tested-by: Martin Schwan <m.schwan@phytec.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
i.MX95 B0 uses image container format v2 and needs DUMMY_DDR so that
update imximage.cfg and container.cfg for it.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
|
|
To support PQC container format which is used for post quantum
authentication on new i.MX parts like i.MX94
The major changes compared to legacy container format is in
signature block, new container tag and version, and new alignment
of container header.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
|
|
i.MX95 B0 uses image container format v2, and `one container header
occupies 0x4000, so that CMD_CNTR_VERSION needs to be added.
The purpose of CMD_DUMMY_DDR is to create a dummy image entry in boot
container prior the DDR OEI image entry. ROM reads the address of DUMMY
DDR image entry and passes it to DDR OEI in OEI entry function as
parameter value, in order to indicate the offset of training data with
the boot container.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
|
|
Since i.MX94, the ELE get_info structure is updated to add
OEM PQC SRK hash, so update it.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
|
|
Enable the D-cache, which will also enable the MMU. The latter
make sure we don't do unaligned access on Strongly-ordered memory,
which has UNPREDICTABLE behaviour according the architecture
definition. This fixes using U-Boot with recent versions of
QEMU's vexpress-ca9 emulation.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
|
|
The local variable method_flags is only assigned to in some of the
code paths leaving it possibly uninitialised at first use.
Initialise method_flags at declaration to ensure that it cannot be
used uninitialised. Also remove now redundant assignments.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
|
|
The stdout-path property is already set to this value in the other
chosen node ~15 lines above.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20250716
Android:
- Fix printing lbaint_t format in AVB and android_ab messages
DFU:
- Fix dfu_config_interfaces() for single interface DFU syntax
|
|
As stated in DFU documentation [1], the device interface part might be
missing in dfu_alt_info:
dfu_alt_info
The DFU setting for the USB download gadget with a semicolon
separated string of information on each alternate:
dfu_alt_info="<alt1>;<alt2>;....;<altN>"
When several devices are used, the format is:
- <interface> <dev>'='alternate list (';' separated)
So in first case dfu_alt_info might look like something like this:
dfu_alt_info="mmc 0=rawemmc raw 0 0x747c000 mmcpart 1;"
And in second case (when the interface is missing):
dfu_alt_info="rawemmc raw 0 0x747c000 mmcpart 1;"
When the interface is not specified the 'dfu' command crashes when
called using 'dfu 0' or 'dfu list' syntax:
=> dfu list
"Synchronous Abort" handler, esr 0x96000006, far 0x0
That's happening due to incorrect string handling in
dfu_config_interfaces(). In case when the interface is not specified in
dfu_alt_info it triggers this corner case:
d = strsep(&s, "="); // now d contains s, and s is NULL
if (!d)
break;
a = strsep(&s, "&"); // s is already NULL, so a is NULL too
if (!a) // corner case
a = s; // a is NULL now
which causes NULL pointer dereference later in this call, due to 'a'
being NULL:
part = skip_spaces(part);
That's because as per strsep() behavior, when delimiter ("&") is not
found, the token (a) becomes the entire string (s), and string (s)
becomes NULL. To fix that issue assign "a = d" instead of "a = s",
because at that point variable d actually contains previous s, which
should be used in this case.
[1] doc/usage/dfu.rst
Fixes: commit febabe3ed4f4 ("dfu: allow to manage DFU on several devices")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250709042342.13544-1-semen.protsenko@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
When printing the contents of an lbaint_t variable we need to use LBAF
to print it in order to get the correct format type depending on 32 or
64bit-ness.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250702010603.19354-2-trini@konsulko.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
When printing the contents of an lbaint_t variable we need to use LBAF
to print it in order to get the correct format type depending on 32 or
64bit-ness. Furthermore, printed message should not be split as that
makes finding them harder, so bring this back to a single line.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250702010603.19354-1-trini@konsulko.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
Use the @mailbox.org mail address also for community work.
Signed-off-by: Stefan Roese <stefan.roese@mailbox.org>
|
|
Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> says:
Several fixes for the airoha ethernet driver.
Link: https://lore.kernel.org/r/20250709092810.4032971-1-mikhail.kshevetskiy@iopsys.eu
|
|
Transmission of short packets does not work good for XFI (GDM2) and
HSGMII (GDM3) interfaces. The issue can be solved with:
- padding of short packets to 60 bytes
- setting of PAD_EN bit in the corresponding REG_GDM_FWD_CFG(n)
register.
The issue should present for the lan switch (GDM1) as well, but it does
does not appear due to unknown reason.
This patch set PAD_EN bit for the used GDM.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
|
|
ARCH_DMA_MINALIGN is 64 for ARMv7a/ARMv8a architectures, but RX/TX
descriptors are 32 bytes long. So they may not be aligned on an
ARCH_DMA_MINALIGN boundary. In case of RX path, this may cause the
following problem
1) Assume that a packet has arrived and the EVEN rx descriptor has been
updated with the incoming data. The driver will invalidate and check
the corresponding rx descriptor.
2) Now suppose the next descriptor (ODD) has not yet completed.
Please note that all even descriptors starts on 64-byte boundary,
and the odd ones are NOT aligned on 64-byte boundary.
Inspecting even descriptor, we will read the entire CPU cache line
(64 bytes). So we read and sore in CPU cache also the next (odd)
descriptor.
3) Now suppose the next packet (for the odd rx descriptor) arrived
while the first packet was being processed. So we have new data
in memory but old data in cache.
4) After packet processing (in arht_eth_free_pkt() function) we will
cleanup the descriptor and put it back to rx queue.
This will call flush_dcache_range() function for the even descriptor,
so the odd one will be flushed as well (it is in the same cache line).
So the old data will be written to the next rx descriptor.
5) We get a freeze. The next descriptor is empty (so the driver is
waiting for packets), but the hardware will continue to receive
packets on other available descriptors. This will continue until
the last available rx descriptor is full. Then the hardware will
also freeze.
The problem will be solved if the previous descriptor will be put back
to the queue instead of the current one.
If the current descriptor is even (starts on a 64-byte boundary),
then putting the previous descriptor to the rx queue will affect
the previous cache line. To be 100% ok, we must make sure that the
previous and the one before the previous descriptor cannot be used
for receiving at this moment.
If the current descriptor is odd, then the previous descriptor is on
the same cache line. Both (current and previous) descriptors are not
currently in use, so issue will not arrise.
WARNING: The following restrictions on PKTBUFSRX must be held:
* PKTBUFSRX is even,
* PKTBUFSRX >= 4.
The bug appears on 32-bit airoha platform, but should be present on
64-bit as well.
The code was tested both on 32-bit and 64-bit airoha boards.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
|
|
The dma_map_single() function calls one of the functions
* invalidate_dcache_range(),
* flush_dcache_range().
Both of them expect that 'vaddr' is aligned to the ARCH_DMA_MINALIGN
boundary. Unfortunately, RX/TX descriptors are 32-byte long. Thus they
might not be aligned to the ARCH_DMA_MINALIGN boundary. Data flushing
(or invalidating) might do nothing in this case.
The same applies to dma_unmap_single() function.
In the TX path case the issue might prevent package transmission (filled
TX descriptor was not flushed).
To fix an issue a special wrappers for
* dma_map_single(),
* dma_unmap_single()
functions were created. The patch fix flushing/invalidatiog for the
RX path as well.
The bug appears on 32-bit airoha platform, but should be present on
64-bit as well.
The code was tested both on 32-bit and 64-bit airoha boards.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
|
|
Compatible device list must have a terminator. If terminator is missed
the u-boot driver subsystem will access random data placed after the
list in the memory.
The issue can be observed with the "dm compat" command.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
|
|
Andrew Goodbody <andrew.goodbody@linaro.org> says:
Smatch reported issues with variables being dereferenced before NULL
checks and also testing an unsigned variable for being negative.
Link: https://lore.kernel.org/r/20250707-exfat_fix-v1-0-e5783978cd11@linaro.org
|
|
In exfat_generic_pread and exfat_generic_pwrite offset is passed in as a
off_t type which is defined as 'unsigned long long' so there is no need
to create the variable uoffset as a uint64_t as this is just a direct
copy of offset. Also remove the impossible test of 'offset < 0' as this
is always false due to offset being unsigned.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
|
|
In the functions exfat_pread and exfat_pwrite there is a NULL check for
ctxt.cur_dev but this has already been derefenced twice before this
happens.
Refactor the code a bit to put the NULL check first.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
|
|
In the Fixes commit, I initialized size_inc from the return value of
the new fit_estimate_hash_sig_size() helper. That helper may fail and
report that by returning a negative value, but I overlooked that
size_inc had type size_t, and hence the error check doesn't work.
Change size_inc to have type int so the error check works. Inside the
loop, it is passed to another function as a size_t parameter, but
that's fine, because we know it is non-negative, and its value may be
incremented in steps of 1024 and is capped at ~64K, so it will
certainly never overflow an int.
Fixes: 7d4eacb0e68 ("mkimage: do a rough estimate for the size needed for hashes/signatures")
Addresses-Coverity-ID: 569495: Integer handling issues (NEGATIVE_RETURNS)
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
multi is guaranteed to be NULL in the first two error exit paths so the
attempt to free it is not needed. Remove those calls.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
|
|
The TPID value should be 0x9100 instead of 0x8100 according to the
datasheet.
Fixes: cedafee9ff3 (net: mediatek: add support for Airoha AN8855 ethernet switch)
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
|
|
Move the NULL check of bootscr_flash_size to before the first time it is
dereferenced to avoid any possible segment violations.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Originally when bootdelay >99, the countdown breaks. Setting bootdelay
at 101 or bigger will trigger this error.
Signed-off-by: David Zang <davidzangcs@gmail.com>
|
|
CONFIG_NR_DRAM_BANKS defines the number of DRAM banks on the
device. The default value of NR_DRAM_BANKS for ARCH_K3 is set to 2
(arch/arm/mach-k3/Kconfig:199) but should be 1 for am62x platforms.
This patch updates NR_DRAM_BANKS value for all am62x platforms to 1.
Fixes: 2969ed31b893 ("configs: Add am62x_beagleplay_*_defconfig")
Fixes: 2d257d9279e3 ("configs: Add configs for AM62x SK")
Fixes: 085cd6459dae ("board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM")
Fixes: 7d1a10659f5b ("board: toradex: add verdin am62 support")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
|
|
Many callers of PCI read functions do not check the return value for
error before using the variable that should contain the value read were
there not to be an error. However in the error case this variable is
never assigned to and so will contain uninitialised data.
To provide some certainty as to behaviour in the error case assign a
default value of all bits set.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
|
|
Fix a segmentation fault in the ECDSA signing logic of `mkimage`
that occurs when the "-r" option is not specified.
This reproduces the logic in `lib/rsa/rsa-sign.c` by checking if
`info->require_keys` is non-null before passing it to
`fdt_setprop_string()`.
Signed-off-by: Lucas Dietrich <lucas.dietrich.git@proton.me>
|
|
The static helper functions are inconsistent in their use of their third
parameter which is used to pass a block count. Keep consistency by
always using lbaint_t here. This will fix an issue where two left shifts
were overflowing the variable type in use.
This issue found by Smatch
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
These functions are only used locally. Enabling -Wmissing-prototypes
triggers a warning. Mark them as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
This functions is only used locally and triggers a warning when
compiling with -Wmissing-prototypes. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
This function is only used locally. Enabling -Wmissing-prototypes triggers
a warning. Mark it as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
These functions are only used locally. Enabling -Wmissing-prototypes triggers
a warning. Mark them as static.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
In the definition of struct ec_state the number of slots that are
created is VSTORE_SLOT_COUNT (==4) but the value of req->slot is
checked against EC_VSTORE_SLOT_MAX (==32) so this can lead to memory
access beyond that allocated.
Instead change the size check to use VSTORE_SLOT_COUNT to ensure it
matches what has actually been allocated.
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
Renaming SPL to XPL fixes the issue referenced in this note so the note
is no longer necessary
Fixes: 1d6132e2a2b ("global: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD")
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
|
|
DM_GPIO_LOOKUP_LABEL and SPL_DM_GPIO_LOOKUP_LABEL had the same
description and therefore appeared to be duplicates in Kconfig frontends
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
|
|
The logic was updated without modifying the comment above it
Fixes: 72b8c6d1ebf ("pinctrl: don't fall back to pinctrl_select_state_simple()")
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
|
|
Rasmus Villemoes <ravi@prevas.dk> says:
I was bitten by our limit macros not being usable in #if conditionals
when building a standalone app. It turns out that the work to fix that
had already been started by the inclusion of the mbedtls library, so
it's something that people do hit.
Let's finish the job by providing suitable limit macros for all three families:
- Standard C types, char, short, ...
- Kernel-style fixed-width types s8, u64, ...
- POSIX/C99 fixed-width types int16_t, uint32_t, ...
Please note that a naive approach like spelling out the full decimal
value for the constants doesn't really work, as there is no such thing
as a "negative integer constant". That is, doing
#define LLONG_MIN -9223372036854775808LL
would lead to the compiler complaining
warning: integer constant is so large that it is unsigned
and the type of that LLONG_MIN would actually be "unsigned long long", so e.g.
#if LLONG_MIN >= 0
#warning "LLONG_MIN is not negative?"
#endif
would fire.
Link: https://lore.kernel.org/r/20250707203655.613340-1-ravi@prevas.dk
|
|
Currently, we only have UINT32_MAX and UINT64_MAX in limits.h, and
then stdint.h and kernel.h somewhat randomly define UINT8_MAX and
INT32_MAX, respectively.
Provide a full set of definitions in terms of the min/max macros for
the types that [u]intNN_t are defined in terms of, namely the {s,u}NN
ones.
Try to avoid breaking whatever depended on getting UINT8_MAX from our
compat stdint.h by replacing it with an include of limits.h.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
Since we define the {s,u}{8,16,32,64} types the same way on all
architectures, i.e. everybody uses asm-generic/int-ll64.h, we can just
define the associated limit macros in terms of those for the
corresponding types. This eliminates another set of limit macros that
are not usable in #if conditionals.
These type names and macros are not C or POSIX, so there's no language
violation, but certainly a violation of developers' reasonable
expectations.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
In a customer project that was building a stand-alone application, I
hit a problem related to the fact that our LONG_MAX and friends are
not standards-compliant, in that they are not "suitable for use in #if
preprocessing directives"
... /toolchain_none/arm-cortexa8-eabi/sys-include/machine/_default_types.h:25:31: error: missing binary operator before token "long"
25 | || ( defined(LLONG_MAX) && (LLONG_MAX > 0x7fffffff) )
| ^~~~~~~~~
So following up on commit 13de8483388 ("mbedtls: add mbedtls into the
build system"), move the rest of the macros associated to the standard
C types {signed,unsigned} {char, short, int, long, long long} (and of
course bare 'char') to limits.h.
Make use of the fact that both gcc and clang provide suitable
predefined __FOO_MAX__ macros for the signed types, and use a standard
scheme for defining the FOO_MIN and UFOO_MAX macros in terms of
FOO_MAX.
Note that suffixes like L and ULL are allowed for preprocessor
integers; it is (casts) which are not. And using appropriate suffixes,
we can arrange for the type of e.g. UINT_MAX to be "unsigned int" due
to integer promotion rules.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/27056
- Fix unused access in ufetch
- Add missing clock for SM8650
- Port the Linux SPMI GPIO driver and port over SM8550 (other platforms
should follow)
|
