summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-28gpio: mvebu_gpio: Set bank name to mvebu%dPali Rohár
Currently bank name is just one alphabetical letter. Change it to mvebu and number. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-28gpio: mvebu_gpio: Read number of gpios from DTPali Rohár
Device tree property "ngpios" contains number of gpios. Use it when available. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-28gpio: mvebu_gpio: Add .request and .rfree methods for Armada 38xPali Rohár
To use particular pin GPIO, it needs to be first switched to GPIO by pinctrl. Use pinctrl_gpio_request() and pinctrl_gpio_free() for this purpose. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-28pinctrl: Add third argument label for pinctrl_gpio_request() functionPali Rohár
This change allows to use pinctrl_gpio_request() function as a direct pointer for dm_gpio_ops's .request callback. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-28arm: mvebu: Add gpio-ranges into Armada 38x device tree filePali Rohár
This allows U-Boot mvebu-gpio.c driver to switch particular MPP pin into GPIO mode and enable GPIO support. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-28mvebu: pinctrl: Add Armada 38x driverPali Rohár
This new Armada 38x driver is based on Linux kernel driver. It can set any pin to any valid function specified in DT like Linux kernel, it provides support for 'pinmux status -a' command and also for pinctrl_gpio_request(). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-28pinctrl: Add new function pinctrl_generic_set_state_prefix()Pali Rohár
This new function pinctrl_generic_set_state_prefix() behaves like pinctrl_generic_set_state() but it takes third string argument which is used as the prefix for each device tree string property. This is needed for Marvell pinctrl drivers, becase Linux device tree files have pinmux properties prefixed by "marvell," string. This change allows to use generic U-Boot pinctrl functions for Armada 38x pinctrl driver without need to copy+paste of the majority U-Boot pinctrl code. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
2022-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-pmicTom Rini
2022-07-27Merge tag 'dm-pull-26jul22' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm.git minor dm- and fdt-related fixes start of test for fdt command
2022-07-27mmc: pci_mmc.c should build with ACPIGEN=nHeinrich Schuchardt
sandbox_defconfig builds the PCI MMC driver. It should be possible to build the sandbox without ACPI support. ACPI support in the PCI MMC driver is only needed when creating an ACPI table. Fix building with ACPIGEN=n. Fixes: dba7ee419d9d ("acpi: mmc: Generate ACPI info for the PCI SD Card") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-07-27cmd: mmc: allow to write protect single boot partitionYing-Chun Liu (PaulLiu)
add arguments for mmc wp to assign which boot partition to protect. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-27drivers: mmc: write protect single boot areaYing-Chun Liu (PaulLiu)
Add features to write protect single boot area rather than all boot areas. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-27mmc: nuvoton: Add NPCM7xx mmc driverJim Liu
Add Nuvoton BMC NPCM750 mmc control driver. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-27mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' errorPali Rohár
Only newer eSDHC controllers set PRSSTAT_SDSTB flag. So do not wait until flag PRSSTAT_SDSTB is set on old pre-2.2 controllers. Instead sleep for fixed amount of time like it was before commit 6f883e501b65 ("mmc: fsl_esdhc: Add emmc hs200 support"). This change fixes error 'Internal clock never stabilised.' which is printed on P2020 board at every access to SD card. Fixes: 6f883e501b65 ("mmc: fsl_esdhc: Add emmc hs200 support") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-27pmic: pca9450: permit config on all bucks and LDOsHeiko Thiery
In order to have the possibility to configure the regulators at system startup through DM support, all LDOs and bucks must be able to be changeable. Currently there is a limitation to change the values when the output is enabled. Since the driver is based on the ROHM BD71837 and a comment that describes a limitation about switching while the output is enabled can also be found there, the limitation probably comes from this type. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-07-26ARM: relocate: Fix Thumb code by using proper label typeAndre Przywara
The generic ARM relocate_code function was using its own function entry point as a relocation base, and it was obtaining that address by using the "adr" instruction on that entry point label. However that label is not just an ordinary label, instead we explicitly mark it as a function start address. Normally that doesn't change much (other than for debugging), but when assembled in Thumb mode, newer versions of the GNU assembler prepare everything for this address being used as the argument to a "bx" call, so make sure bit 0 is set in there to mark this function as Thumb code. Of course this doesn't end up very well when we use this address for the ensuing memcpy operation. To avoid this problem, and to solve it in a robust way, add an extra label, which is not marked as a function entry, and use that for the adr instruction. This lets all assemblers generate the right immediate offset in the "adr" instruction. This fixes in particular ARMv7-M ports when using GNU binutils v2.37 or newer (commit d3e52e120b68 seems to trigger the change in behaviour). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reported-by: Jesse Taube <mr.bossman075@gmail.com>
2022-07-26Merge tag 'u-boot-imx-20220726' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20220726 ------------------- i.MX for 2022.10 - Added i.MX93 architecture CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12891
2022-07-26Merge tag 'xilinx-for-v2022.10-rc2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.10-rc2 fpga: - Convert SYS_FPGA_CHECK_CTRLC and SYS_FPGA_PROG_FEEDBACK to Kconfig - Add support for secure bitstream loading spi: - xilinx_spi: Add support for memopers and supports_op - zynq_qspi: Add support for supports_op/child_pre_probe - zynq_qspi: Fix dummy cycle and qspi speed calculations xilinx: - Get rid of #stream-id-cells - Use fixed partitions for SOM - Add support for UUID reading from FRU - Use strlcpy instead of strncpy - Add reset driver support for ZynqMP and Versal - Enable power domain driver in ZynqMP and Versal zynqmp: - Do no place BSS at 0 which have issue with NULL pointer - Enable SLG gpio driver - Disable LMB for mini configurations - Remove duplicate PMIO_NODE_ID_BASE macro versal: - Add xlnx-versal-resets.h header mmc: - zynq_sdhci: Fix macro for MMC HS relocate-rela: - Fix support for BE hosts - Define all macros for e_machine and reloc types misc: - Get rid of guard macros from ARM and RISC-V lmb: - Add support for disabling LMB serial: - zynq: Fix baudrate calculation tests: - Mark bind tests to run only on sandbox - List also dm uclass and devres
2022-07-26imx: imx8mm-icore: migrate to use BINMANPeng Fan
Use BINMAN instead of imx specific packing method. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-07-26arm: dts: imx8m: shrink ddr firmware size to actual file sizePeng Fan
After we switch to use BINMAN_SYMBOLS, there is no need to pad the file size to 0x8000 and 0x4000. After we use BINMAN_SYMBOLS, the u-boot-spl-ddr.bin shrink about 36KB with i.MX8MP-EVK. Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8m[m,n,p]-venice Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-07-26ddr: imx8m: helper: load ddr firmware according to binman symbolsPeng Fan
By reading binman symbols, we no need hard coded IMEM_LEN/DMEM_LEN after we update the binman dtsi to drop 0x8000/0x4000 length for the firmware. And that could save binary size for many KBs. Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8m[m,n,p]-venice Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> [Alper: Check BINMAN_SYMS_OK instead] Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-07-26arm: dts: imx8m: update binman ddr firmware node namePeng Fan
We are migrating to use binman symbols, the current names are inconsistent across different boards, so unify them. Also add `type = "blob-ext";`, since the new names are not valid binman types. Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8m[m,n,p]-venice Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> [Alper: Edit commit message] Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-07-26tools: image: support i.MX93Peng Fan
Support build i.MX93 container image with mkimage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26board: freescale: imx93_evk: support ethernetPeng Fan
Add ethernet support Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26net: dwc_eth_qos: introduce eqos hook eqos_get_enetaddrPeng Fan
i.MX has specific hook to get MAC address, so introduce a hook and move i.MX code to its own driver Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26net: eqos: add function to get phy node and addressYe Li
Since new atheros PHY driver needs to access its PHY node through phy device, we have to assign the phy node in ethernet controller driver. Otherwise the PHY driver will fail to get some nodes and properties. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26net: dwc_eth_qos: move i.MX code outPeng Fan
Move i.MX code to a standalone file to make it easy for adding new platform support Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26net: dwc_eth_qos: public some functionsPeng Fan
Move macros and structures to header file and make some functions public, so that could used by other files, this is to prepare split platform specific config to one file. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26net: dwc_eth_qos: fix build break when CLK not enabledPeng Fan
When CONFIG_CLK is not enabled, there will be buil break: "error: ‘eqos’ undeclared (first use in this function)" Take eqos definition out the CONFIG_CLK ifdef. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26net: fec_mxc: support i.MX93Peng Fan
Support i.MX93 in fec_mxc driver Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx93_evk: Set ARM clock to 1.7GhzPeng Fan
Set ARM clock to OD frequency 1.7Ghz, since we have set PMIC VDD_SOC to Overdrive voltage 0.9V Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx93_evk: Add basic board supportPeng Fan
Add basic board codes and defconfig for i.MX93 11x11 EVK board. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26arm: dts: Add i.MX93 SoC DTSi filePeng Fan
Add the DTSi file and DT header files for i.MX93 SoC Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26ddr: imx9: enable Performance monitor counterYe Li
Add Kconfig for enabling reference events counter in DDRC performance monitor by default Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26ddr: imx: Add i.MX9 DDR controller driverYe Li
Since i.MX9 uses same DDR PHY with i.MX8M, split the DDRPHY to a common directory under imx, then use dedicated ddr controller driver for each iMX9 and iMX8M. The DDRPHY registers are space compressed, so it needs conversion to access the DDRPHY address. Introduce a common PHY address remap function for both iMX8M and iMX9 for all PHY registers accessing. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: clock: Add DDR clock supportYe Li
Implement the DDR driver clock interfaces for set DDR rate and bypass DDR PLL Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: Support multiple env storages at runtimeYe Li
Select env storages according to boot device at runtime Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: Support booting m33 from AcorePeng Fan
Add bootaux command to support on-demand booting M33 from u-boot. It kicks M33 via ATF by "bootaux 0x201e0000 0" Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: Add M33 release prepare functionPeng Fan
To support on-demand booting M33 image from A core. SPL needs to follow M33 kick up sequence to release M33 firstly, then set M33 CPUWAIT signal. ATF will clear CPUWAIT to kick M33 to run. The prepare function also works around the M33 TCM ECC issue by clean the TCM. Also enable sentinel handshake and WDOG1 clock for M33 stop and reset. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: Add MIX power initPeng Fan
Add power init of MEDIAMIX, MLMIX and DDRMIX. And clear isolation of MIPI DSI/CSI, USBPHY after the power up. SPL should call the power init in its boot sequence before accessing above three MIX and USB. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: Add gpio registers structureYe Li
Add GPIO registers structure for iMX93, so that we can enable lpgpio driver Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26misc: fuse: update the code for accessing fuse of i.MX93Alice Guo
Sentinel have read access of OTP shadow register 0-511, and fsb have read access of shadow 0-51/312-511. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26misc: fuse: support to access fuse on i.MX93Alice Guo
i.MX93 fuse can be accessed through FSB and s400-api. Add mapping tables for i.MX93. The offset address of FSB accessing OTP shadow registers is different between i.MX8ULP and i.MX93, so use macro to define the offset address instead of hardcode. Signed-off-by: Alice Guo <alice.guo@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26misc: imx8ulp: move fuse.c from imx8ulp to sentinelAlice Guo
The i.MX93 platform wants to reuse drivers/misc/imx8ulp/fuse.c. Moving fuse.c from the folder imx8ulp to sentinel makes it can be used by other platforms. Signed-off-by: Alice Guo <alice.guo@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26misc: S400_API: Rename imx8ulp_s400_msg to sentinel_msgYe Li
Use more generic name for S40x msg structure Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: Get the chip revision through S400 APIPeng Fan
Update the get chip revision methond to use S400 API, also record other information like lifecycle and UID to global data. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: Add AHAB boot supportYe Li
Add AHAB driver for iMX9 to do authentication by calling sentinel API Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26imx: imx9: Add TRDC driver for TRDC initYe Li
Add TRDC driver to iMX9. The TRDC init splits to two phases: 1. Early init phase will release TRDC from Sentinel and open write permission to the memory where SPL image runs. Sentinel will set the memory to RX only after ROM authentication for the OEM closed part. 2. Init phase will configure TRDC to allow non-secure master to access DDR. So the peripherals can work in u-boot. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26misc: s400_api: introduce ahab_release_m33_troutPeng Fan
Introduce Sentinel API ahab_release_m33_trout to make sure sentinel release M33 trout and make sure M33 could boot. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-02 22:18:54 +0000