summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-13board: transformer-t30: fix model detectionSvyatoslav Ryhel
PCBID1 seems to be high not only on TF600T, but on TF700T as well, that caused boot failure for TF700T. Switching PCBID1 to PCBID7 should fix this issue. Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-13doc: board: tegra: update device informationSvyatoslav Ryhel
Adjust and update existing manuals to reflect the most recent updates. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-13ARM: tegra124: dts: mark HOST1X and DC with pre-relocation flagSvyatoslav Ryhel
Same as on previous SoC generations this is required for proper video output work. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12ARM: tegra124: dts: add missing DSI nodesSvyatoslav Ryhel
Bind missing DSI and MIPI calibration devices. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12ARM: tegra30: dts: complete DSI nodesSvyatoslav Ryhel
Sync DSI nodes with Linux tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12ARM: tegra210: clock: implement PLLD2 supportSvyatoslav Ryhel
PLLD2 is a simple clock (controlled by 2 registers) and appears starting from T30. Primary use of PLLD2 is as main HDMI clock parent. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12ARM: tegra124: clock: implement PLLD2 supportSvyatoslav Ryhel
PLLD2 is a simple clock (controlled by 2 registers) and appears starting from T30. Primary use of PLLD2 is as main HDMI clock parent. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12board: asus: convert SPL to XPLSvyatoslav Ryhel
Not sure why these files were omitted, but SPL should be converted to XPL. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12pinctrl: tegra20: adjust pin type detectionSvyatoslav Ryhel
Pin detection on t20 depends on node name. With recent changes in node naming, let's remove '_' to be safe about both '_' or '-' use. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2025-02-12pmic: palmas: bind sysreset to parent nodeSvyatoslav Ryhel
Bind SYSRESET child to parent node since it does not have its own node in the device tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-02-12pmic: max77663: bind children to parent nodeSvyatoslav Ryhel
Bind GPIO and SYSRESET children to parent node since they do not have their own nodes in the device tree. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-02-12Revert "drivers: gpio-uclass: support PMIC GPIO children"Svyatoslav Ryhel
Requesting of PMIC's GPIO child should be done by binding GPIO driver to PMIC's node is GPIO driver does not have its own node. This reverts commit c03cd98d1a163666b4addcdd9a34fc0c77dfd0a5. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2025-02-11configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2025-02-11Merge tag 'u-boot-dfu-20250211' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dfu u-boot-dfu-20250211: CI: - https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24556 Android: - Handle boot images with missing DTB Usb gadget: - Fix nullptr in g_dnl when serial# is unset - Add missing schedule() in f_mass_storage gadget - Add support for STih407 in dwc3-generic - Fix usb clocks on STih407 - Migrate STih407 to DM_USB_GADGET
2025-02-11configs: stih410-b2260: Enable CMD_USB_MASS_STORAGE flagPatrice Chotard
Enable CMD_USB_MASS_STORAGE flag. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-10-patrice.chotard@foss.st.com [mkorpershoek: fixed up commit footer] Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11board: stih410-b2260: Remove board_usb_init/cleanup()Patrice Chotard
Since DM_USB_GADGET is enable for this board, board_usb_init() and board_usb_cleanup() can be removed. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-9-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11configs: stih410-b2260: Enable DM_USB_GADGET flagPatrice Chotard
Enable DM_USB_GADGET flag. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-8-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11configs: stih410-b2260: Enable USB_DWC3_GENERIC and USB_DWC3_STI flagsPatrice Chotard
Enable USB_DWC3_GENERIC and USB_DWC3_STI flags. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20250130163547.512990-7-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11usb: dwc3-generic: Add STih407 supportPatrice Chotard
Add STi glue logic to manage the DWC3 HC on STiH407 SoC family. It configures the internal glue logic and syscfg registers. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20250130163547.512990-6-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11usb: dwc3-generic: Reorder includePatrice Chotard
Reorder include following rules available here : https://docs.u-boot.org/en/latest/develop/codingstyle.html#include-files Remove useless include files. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-5-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11usb: dwc3: Remove dwc3 glue driver support for STiPatrice Chotard
STi will migrate to dwc3-generic driver, dwc3-sti-glue driver can be removed. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20250130163547.512990-4-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11configs: stih410-b2260: Enable DM_REGULATOR flagPatrice Chotard
Since commit 6aa8bde8786d ("usb: host: ehci-generic: Remove DM_REGULATOR flag") device_get_supply_regulator() returns -ENOSYS which is not handle by ehci_enable_vbus_supply() and thus, ehci_usb_probe() return an error. By enabling DM_REGULATOR flag, device_get_supply_regulator() return -ENOENT which is handle and ehci_usb_probe() return 0. This fixed the following issue: stih410-b2260 =>usb start starting USB... Bus dwc3@9900000: Register 2000240 NbrPorts 2 Starting the controller USB XHCI 1.00 Bus usb@9a03c00: USB OHCI 1.0 Bus usb@9a03e00: probe failed, error -38 Bus usb@9a83c00: USB OHCI 1.0 Bus usb@9a83e00: probe failed, error -38 scanning bus dwc3@9900000 for devices... 1 USB Device(s) found scanning bus usb@9a03c00 for devices... data abort pc : [<7df929b4>] lr : [<7df92918>] reloc pc : [<7d6409b4>] lr : [<7d640918>] sp : 7c73b848 ip : 9cf13c5c fp : 7c879d08 r10: 7c85d040 r9 : 7c74ded0 r8 : 09a03c00 r7 : 00000002 r6 : 7c85d080 r5 : 7c86a040 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 7c85d080 r0 : 7c85d040 Flags: nzCv IRQs off FIQs off Mode SVC_32 Code: 05853ae4 0affffe2 e59a2010 e59a300c (e5832010) Resetting CPU ... Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-3-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11ARM: dts: sti: Add fixed clock for ehci and ohci nodes in stih410-b2260.dtsiPatrice Chotard
On STi platforms, all clocks are enabled by BOOTROM, so CONFIG_CLK is not set as no clock driver for STI exists. As ehci-generic and ohci-generic drivers are used on platforms where CONFIG_CLK is set, clk_get_bulk() returns-ENOSYS in case of stih410-b2260. To avoid this error, add fixed clocks for ehci and ohci nodes for stih410-b2260 to fix the following errors: Bus usb@9a03c00: ohci_generic usb@9a03c00: Failed to get clocks (ret=-19) Port not available. Bus usb@9a03e00: ehci_generic usb@9a03e00: Failed to get clocks (ret=-19) Port not available. Bus usb@9a83c00: ohci_generic usb@9a83c00: Failed to get clocks (ret=-19) Port not available. Bus usb@9a83e00: ehci_generic usb@9a83e00: Failed to get clocks (ret=-19) Port not available. scanning bus dwc3@9900000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20250130163547.512990-2-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-11usb: gadget: f_mass_storage: Add schedule() in sleep_thread()Patrice Chotard
In case "ums" command is used on platforms which don't implement g_dnl_board_usb_cable_connected() and USB cable is not connected, we stay inside sleep_thread() forever and watchdog is triggered. Add schedule() call to avoid this issue. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20241202074644.5380-1-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-02-10Prepare v2025.04-rc2v2025.04-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2025-02-10CI: Drop extra condition for sjg labSimon Glass
The rules part of the template makes sure that this doesn't run until specifically requested. Drop the check in the script itself, so it is possible to trigger a run manually without re-pushing the tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2025-02-10Merge patch series "Enable MCU ESM reset"Tom Rini
Judith Mendez <jm@ti.com> says: This patch series enables ESM reset configuration in board_init_f for am62x and am62px devices. This is necessary in order for error events to reset the system. This patches are tested using watchdog to reset the system via ESM. Link: https://lore.kernel.org/r/20250129234403.574766-1-jm@ti.com
2025-02-10configs: am62*_evm_r5: Enable ESM and MISC configsSanthosh Kumar K
Enable CONFIG_SPL_DRIVERS_MISC, CONFIG_SPL_MISC, CONFIG_ESM_K3 to probe the Main ESM and MCU ESM nodes. Signed-off-by: Santhosh Kumar K <s-k6@ti.com> Signed-off-by: Judith Mendez <jm@ti.com>
2025-02-10arm: mach-k3: am62*_init: Probe ESM nodesSanthosh Kumar K
On AM62A and AM62P devices, it is possible to route Main ESM error events to MCU ESM. MCU ESM high error output can trigger the reset logic to reset the device. So, for these devices we have Main ESM and MCU ESM nodes in the device tree. Add functions to probe these nodes if CONFIG_ESM_K3 is enabled. Signed-off-by: Santhosh Kumar K <s-k6@ti.com> Signed-off-by: Judith Mendez <jm@ti.com>
2025-02-10include: env: phytec: Add optargs to K3 filesNathan Morrisson
Add the optargs variable so that we can set optional arguments while booting. Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com> Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
2025-02-10env: fat: Avoid writing to read-only locationAndre Przywara
The env_fat_get_dev_part() function mostly returns a fixed string, set via some Kconfig variable. However when the first character is a colon, that means that the boot device number is determined at runtime, and patched in. This requires altering the string. So far this was done via some ugly and actually illegal direct write to the .rodata string storage. We got away with this because U-Boot maps everything as read/write/execute so far. A proposed patch set actually enforces read-only (and no-execute) permissions in the page tables, so this routine now causes an exception: ======================= Loading Environment from FAT... "Synchronous Abort" handler, esr 0x9600004f, far 0xfffb7d4c elr: 000000004a054228 lr : 000000004a05421c (reloc) elr: 00000000fff7c228 lr : 00000000fff7c21c ..... ======================= Rewrite the routine to do away with the dodgy string manipulation, instead allocate the string in the r/w .data section, where we can safely manipulate it. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2025-02-10Merge patch series "FIX: Re-enable MUX_MMIO on J721E/J7200"Tom Rini
Siddharth Vadapalli <s-vadapalli@ti.com> says: Hello, This series re-enables MUX_MMIO at U-Boot proper on J721E and J7200 SoCs. The commits which introduced support for Hyperflash boot on both of these SoCs disabled MUX_MMIO functionality at U-Boot proper, thereby introducing a regression. Series is based on commit 2b1c8d3b2d cmd: Fix Kconfig coding style of the master branch of U-Boot. Link: https://lore.kernel.org/r/20250201091809.1894892-1-s-vadapalli@ti.com
2025-02-10configs: j7200_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot properSiddharth Vadapalli
Commit under Fixes introduced support for Hyperflash boot but also disabled MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper to setup the SERDES Lane Mapping as described by the device-tree. On J7200 SoC, PCIe functionality is broken since commit under fixes. Fix this regression by re-enabling MUX_MMIO. Fixes: 038f6faea9f0 ("configs: j7200_evm_*_defconfig: Add configs for Hyperflash boot") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Anurag Dutta <a-dutta@ti.com>
2025-02-10configs: j721e_evm_a72_defconfig: Re-enable MUX_MMIO at U-Boot properSiddharth Vadapalli
Commit under Fixes introduced support for Hyperflash boot but also disabled MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper to setup the SERDES Lane Mapping as described by the device-tree. Fix this regression by re-enabling MUX_MMIO. Fixes: fd7fcd4098d5 ("configs: j721e_evm_*_defconfig: Add configs for Hyperflash boot") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2025-02-10rtc: emul_rtc: Make emul_rtc_probe() staticMichal Simek
emul_rtc_probe() is not called from anywhere else that's why make it static. Issue is reported by build with W=1. Signed-off-by: Michal Simek <michal.simek@amd.com>
2025-02-10net: designware: support phy io micro voltage setting.Michael Chang
Support phy io micro voltage setting for NPCM8XX rgmii interface. Signed-off-by: Michael Chang <zhang971090220@gmail.com>
2025-02-10mediatek: mt7981: enable ethernet switch auto-detctionWeijie Gao
This patch enables switch auto-detction for mt7981 as some new mt7981 boards will use AN8855 ethernet switch. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2025-02-10configs: phycore_am64x_r5_defconfig: Enable PHYTEC_SOM_DETECTIONWadim Egorov
Enable configs required for detecting and fixing up for different RAM variants. Also resync after savedefconfig. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Tested-by: Daniel Schultz <d.schultz@phytec.de>
2025-02-10board: phytec: phycore_am64x: Add support for 1 GB RAM variant and ECCWadim Egorov
Detect RAM size via EEPROM and adjust DDR size and banks accordingly. Include necessary fixups to handle ECC-enabled configurations. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Tested-by: Daniel Schultz <d.schultz@phytec.de>
2025-02-10arch: arm: dts: phyboard-electra-uboot.dtsi: Add bootph props to i2cWadim Egorov
Add bootph-all properties to I2C0 nodes to ensure the bus and EEPROM are accessible across all stages. This enables reading the SoM configuration at any point during the boot process. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Tested-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
2025-02-10test/py: usb: Fix format string for fstype commandAndrew Goodbody
USB tests on ext partitions can fail with the following output test/py/tests/test_usb.py:245: in test_usb_part 'fstype usb %d:%d' % i, part_id E TypeError: not enough arguments for format string So add brackets around the format string arguments to prevent the error. Fixes: a730947974e3 ("test/py: usb: Distinguish b/w ext2/ext4 partitions") Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Love Kumar <love.kumar@amd.com>
2025-02-10tools: mkenvimage: List -V parameter in help textMarek Vasut
The -V version parameter is missing in the optional list of parameters in help text. Add it. Signed-off-by: Marek Vasut <marex@denx.de>
2025-02-10mediatek: mt7986: rename pinctrl to pio in mt7986-u-boot.dtsiWeijie Gao
The change from pinctrl to pio was missing in mt7986-u-boot.dtsi and will cause build failure. Now fix it. Fixes: f1775996ba9 (mediatek: mt7986: move gpio-controller up and rename pinctrl to pio) Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2025-02-10pinctrl: mediatek: support reading register base address by nameWeijie Gao
This patch add support to read register base address by name if provided. Also devfdt_get_addr_* is changed to dev_read_addr_* to support DT live tree. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2025-02-10pinctrl: mediatek: mt7988: remove _base from reg-namesWeijie Gao
The reg-names in mt7988.dtsi have no _base suffix. Remove the suffix will also make it match upstream linux format. Fixes: 8c2cb748ef5 (pinctrl: mediatek: mt7988: rename reg-names to upstream linux format) Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2025-02-10Azure: Add missing "set -e" to docs jobTom Rini
Without setting the shell flag to exit immediately when a command exists with a non-zero status we can have the situation where the htmldocs target fails with an error but the job will succeed due to infodocs passing and being the last build target. Signed-off-by: Tom Rini <trini@konsulko.com>
2025-02-10Merge https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini
- e850-96 platform updates
2025-02-07Merge patch series "cmd/setexpr: support concatenation of direct strings"Tom Rini
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says: The setexpr.s command allows to concatenate two strings. According to the description in doc/usage/cmd/setexpr.rst the parameters value1 and value2 can be either direct values or pointers to a memory location holding the values. Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values is a direct value. $? is set to false. * Add support for direct values in setexpr.s. * Correct the unit test for "setexpr.s fred 0". * Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'. * Remove invalid memory leak tests Link: https://lore.kernel.org/r/20250203151029.60265-1-heinrich.schuchardt@canonical.com
2025-02-07cmd/setexpr: support concatenation of direct stringsHeinrich Schuchardt
The setexpr.s command allows to concatenate two strings. According to the description in doc/usage/cmd/setexpr.rst the parameters value1 and value2 can be either direct values or pointers to a memory location holding the values. Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values is a direct value. $? is set to false. * Add support for direct values in setexpr.s. * Correct the unit test for "setexpr.s fred 0". * Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2025-02-07test: remove available memory check in setexpr_test_str_oper()Heinrich Schuchardt
env_set() frees the previous value after allocating the new value. As the free() may merge memory chunks the available memory is not expected to stay constant. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-06 13:49:11 +0000