summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-12Convert CONFIG_MD5 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MD5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MX6 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MX6 CONFIG_MX7 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_IMX_BOOTAUX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_IMX_BOOTAUX CONFIG_IMX_THERMAL Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_SYS_PROMPT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PROMPT CONFIG_SYS_PROMPT_HUSH_PS2 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_I2C_EDID et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_PHY_ATHEROS CONFIG_PHY_GIGE CONFIG_MII Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_MISC_INIT_F et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MISC_INIT_F CONFIG_MISC_INIT_R Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_TRACE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TRACE CONFIG_TRACE_BUFFER_SIZE CONFIG_TRACE_EARLY CONFIG_TRACE_EARLY_ADDR CONFIG_TRACE_EARLY_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_SYS_CONSOLE_IS_IN_ENV to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH CONFIG_ENV_IS_NOWHERE CONFIG_ENV_OFFSET CONFIG_ENV_OVERWRITE CONFIG_ENV_SECT_SIZE CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_FSL_USDHC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_FSL_LAYERSCAPE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_LAYERSCAPE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_BITBANGMII to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BITBANGMII Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_DOS_PARTITION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DOS_PARTITION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_E1000 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_E1000 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_ARCH_CPU_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Merge branch '2021-11-12-assorted-updates'Tom Rini
- A number of pxe related cleanups and related re-organization. - A few related pxe/sysboot/extlinux improvements - Remove some dead code. - Update Azure to use a newer Windows build environment - Add a .get_maintainer.conf file - A few minor TI SoC platform updates
2021-11-11rtc: ds1337: fix compatible string typoClemens Gruber
The driver supports the ds1339 as well, which was probably intended by the author but prevented by a typo. Fix the typo. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
2021-11-11boards: siemens: iot2050: Ignore network errors during bootstage trackingJan Kiszka
We need to filter out NET_ETH_START errors because we have to enable networking in order to propagate the MAC addresses to the DT while there is no network driver for the prueth in U-Boot yet. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-11-11boards: siemens: iot2050: Re-enable bootstage reportingJan Kiszka
This got lost while fixing up the condition in board/siemens/iot2050/board.c Fixes: b55881dd ("bootstage: Add SPL support") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-11ARM: dts: am335x-chiliboard: add /chosen/tick-timerMarcin Niestroj
Commit 4b2be78ab66c ("time: Fix get_ticks being non-monotonic") has broken boot on chiliboard platform, as it requires '/chosen/tick-timer' in device-tree. This resulted in following panic message: Could not initialize timer (err -19) Provide missing chosen property in device-tree to fix chiliboard support. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2021-11-11get_maintainer.pl: add .get_maintainer.confMichael Walle
Since commit e57c7c5c4282 ("get_maintainer.pl: update from Linux kernel v5.13-rc6") only the top level MAINTAINERS file is used. This is because this commit (accidentally) disabled the search of MAINTAINERS files (find_maintainer_files is set to 0 again). Before that, commit b79372ae94fb ("scripts/get_maintainer.pl: enable find_maintainer_files") explicitly enabled that feature. Nowadays, we also have to set maintainer_path to a directory. To fix it and enable recursive search of MAINTAINERS, create a configuration file to set these two variables. Signed-off-by: Michael Walle <michael@walle.cc>
2021-11-11Azure: Move to windows-2019Tom Rini
As per https://github.com/actions/virtual-environments/issues/4312 the Windows-2016 environments are scheduled for deprecation and removal in early 2022. Move to windows-2019 now to avoid this (Visual Studio 2019 is included here, hence the tag naming scheme change). Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-11Remove LYNX KDI remaindersThomas Huth
The last board that used to set CONFIG_LYNXKDI has been removed in commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support"), doc/README.lynxkdi only talks about a MPC8260 board being supported, and the mpc8260 support has been removed four years ago in commit 2eb48ff7a210d ("powerpc, 8260: remove support for mpc8260") already, and common/lynxkdi.c only consists of an "#error" statement these days, so it seems like the LYNX KDI code is dead code nowadays. Let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-11-11pxe: Allow calling the pxe_get logic directlySimon Glass
Refactor this code so that we can call the 'pxe get' command without going through the command-line interpreter. This makes it easier to get the information we need, without going through environment variables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11doc: Move distro boot doc to rSTSimon Glass
Move this over to the new rST format. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Refactor sysboot to have one helperSimon Glass
The only difference between the three helpers is the filesystem type. Factor this out and call the filesystem functions directly, instead of through the command-line interpreter. This allows the file size to be obtained directly, instead of via an environment variable. We cannot do the same thing with PXE's tftpboot since there is no API at present to obtain information about the file that was read. So there is no point in changing pxe_getfile_func to use a ulong for the address, for example. This is as far as the refactoring can go for the present. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Return the file size from the getfile() functionSimon Glass
It is pretty strange that the pxe code uses the 'filesize' environment variable find the size of a file it has just read. Partly this is because it uses the command-line interpreter to parse its request to load the file. As a first step towards unwinding this, return it directly from the getfile() function. This makes the code a bit longer, for now, but will be cleaned up in future patches. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11lib: Add a function to convert a string to a hex valueSimon Glass
Add an xtoa() function, similar to itoa() but for hex instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-11lib: Add tests for simple_itoa()Simon Glass
Add test and a comment for this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com>
2021-11-11pxe: Drop get_bootfile_path()Simon Glass
This function no longer makes sense, since it is pretty easy to prepend the boot directory to the filename. Drop it and update its only caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Clean up the use of bootfileSimon Glass
The 'bootfile' environment variable is read in the bowels of pxe_util to provide a directory to which all loaded files are relative. This is not obvious from the API to PXE and it is strange to make the caller set an environment variable rather than pass this as a parameter. The code is also convoluted, which this feature implemented by get_bootfile_path(). Update the API to improve this. Unfortunately this means that pxe_setup_ctx() can fail, so add error checking. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Move common parsing coding into pxe_utilSimon Glass
Both the syslinux and pxe commands use essentially the same code to parse and run extlinux.conf files. Move this into a common function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Tidy up code style a little in pxe_utilsSimon Glass
There are a few more blank lines than makes sense for readability. Also free() handles a NULL pointer so drop the pointless checks. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Tidy up some comments in pxe_utilsSimon Glass
Some of these functions are a big vague in the comments. Tidy them up a bit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Move pxe_utils filesSimon Glass
Move the header file into the main include/ directory so we can use it from the bootmethod code. Move the C file into boot/ since it relates to booting. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Tidy up the is_pxe globalSimon Glass
Move this into the context to avoid a global variable. Also rename it since the current name does not explain what it actually affects. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Add a userdata field to the contextSimon Glass
Allow the caller to provide some info which is passed back to the readfile() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Move do_getfile() into the contextSimon Glass
Rather than having a global variable, pass the function as part of the context. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Use a context pointerSimon Glass
At present the PXE functions pass around a pointer to command-table entry which is very strange. It is only needed in a few places and it is odd to pass around a data structure from another module in this way. For bootmethod we will need to provide some context information when reading files. Create a PXE context struct to hold the command-table-entry pointer and pass that around instead. We can then add more things to the context as needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11pxe: Move API comments to the header filesSimon Glass
Put the function comments in the header file so that the full API can we examined in one place. Expand the comments to cover parameters and return values. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11Create a new boot/ directorySimon Glass
Quite a lot of the code in common/relates to booting and images. Before adding more it seems like a good time to move the code into its own directory. Most files with 'boot' or 'image' in them are moved, except: - autoboot.c which relates to U-Boot automatically running a script - bootstage.c which relates to U-Boot timing Drop the removal of boot* files from the output directory, since this interfers with the symlinks created by tools and there does not appear to be any such file from my brief testing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-11Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- device-tree sync-up with Linux for ls1028a - fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc, spintable code, configs, qspi node, pci - enable EFI_SET_TIME support in sl28 - powerpc: Drop -mstring
2021-11-10Merge tag 'u-boot-stm32-20211110' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - DHSOM update: - Remove nWP GPIO hog - Increase SF bus frequency to 50Mhz and enable SFDP - Disable video output for DHSOM - Disable EFI - Enable DFU_MTD support - Create include file for STM32 gpio driver private data - Split board and SOC STM32MP15 configuration - Device tree alignement with v5.15-rc6 for STM32MP15 - Add binman support for STM32MP15x - Normalise newlines for stm32prog - Update OTP shadow registers in SPL
2021-11-10stm32mp15: tidy up #ifdefs in cpu.cPatrick Delaunay
We should avoid #ifdef in C modules and the unused functions are eliminated by the linker. Use the more readable IS_ENABLE() instead. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10stm32mp15: replace CONFIG_TFABOOT when it is possiblePatrick Delaunay
In some part of STM32MP15 support the CONFIG_TFABOOT can be replaced by other config: CONFIG_ARMV7_PSCI and CONFIG_ARM_SMCCC. This patch also simplifies the code in cpu.c, stm32mp1_ram.c and clk_stml32mp1.c as execution of U-Boot in sysram (boot without SPL and without TFA) is not supported: the associated initialization code is present only in SPL. This cleanup patch is a preliminary step to support SPL load of OP-TEE in secure world, with SPL in secure world and U-Boot in no-secure world. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10stm32mp15: remove configs dependency on CONFIG_TFABOOTPatrick Delaunay
Remove the dependency on CONFIG_TFABOOT in stm32mp Kconfig - always activate the ARCH config: CONFIG_ARCH_SUPPORT_PSCI and CONFIG_CPU_V7_HAS_NONSEC - CONFIG_ARMV7_NONSEC is deactivated in trusted defconfig - the correct sysreset driver is activated in each defconfig: CONFIG_SYSRESET_PSCI or SYSRESET_SYSCON Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10arm: stm32mp: bsec: Update OTP shadow registers in SPLPatrick Delaunay
Currently the upper OTP (after 57) are shadowed in U-Boot proper, when TFABOOT is not used. This choice cause an issue when U-Boot is not executed after SPL, so this BSEC initialization is moved in SPL and no more executed in U-Boot, so it is still executed only one time. After this patch this BSEC initialization is done in FSBL: SPL or TF-A. To force this initialization in all the case, the probe of the BSEC driver is forced in SPL in the arch st32mp function: spl_board_init(). Even if today BSEC driver is already probed in STM32MP15x clock driver clk_stm32mp1.c because get_cpu_type() is called in stm32mp1_get_max_opp_freq() function. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Align mtdparts with SPI NOR layout on DHSOMMarek Vasut
The DHSOM uses different SPI NOR layout than the ST devkit, stop pulling in the ST specific runtime mtdparts settings and adjust the mtdparts accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Disable video output on DHSOMMarek Vasut
The video output support is unused and disabling it saves about 20 kiB of space. In case video output support is required, it can be re-enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-05 20:07:27 +0000